+ All Categories
Home > Documents > Phoenix G2 ATX Motherboard - Phoenix G2 Station Alerting

Phoenix G2 ATX Motherboard - Phoenix G2 Station Alerting

Date post: 11-Dec-2021
Category:
Upload: others
View: 22 times
Download: 0 times
Share this document with a friend
1
Phoenix G2 ATX Motherboard 1. Only connect Phoenix G2 Peripheral CAT5 cables to POE (48VDC) Outputs. 2. Over Current Reset LED will only glow red if the system detects an over current.
Transcript
Page 1: Phoenix G2 ATX Motherboard - Phoenix G2 Station Alerting

Phoenix G2 ATX Motherboard

!

!1. Only connect Phoenix G2 Peripheral CAT5 cables to POE (48VDC) Outputs. 2. Over Current Reset LED will only glow red if the system detects an over current.

Recommended