Gas Piping, Tubing, Fittings & Equipment

1

We are Distributors and Manufacturers ofHigh Quality Lifestyle Products and provide full Bespoke Solutions for any environment

Gas Piping, Tubing, Fittings & Equipment

INDEX

4

4

5

6

7

Corrugated Stainless Steel Installation Guide for Gas Installations

Introduction to Corrugated Stainless Steel Tubing (CSST)

What standard is our CSST manufactured and supplied to?

Technical data for CSST

Installation of CSST

CSST fittings to tubing

SYAM Distributors is a renowned andhighly established distributor of highquality appliances, tool and storagechests as well as other related products.Uncompromising focus and attention todetail in all our endeavours is what hassets us apart as an innovative industryleader.

Established in 2004, SYAM is run by aninnovative, entrepreneurial and driventeam. Assisting in all aspects of thecompany and the day to day runningof the business, this dynamic teamhave managed to effortlessly build thecompany from the ground up and havecreated one of South Africa’s leadingbrands.

SYAM offers premium products to thelocal and International market. All ofour product offerings are made of thebest materials, are tested, approvedand environmentally friendly. We payclose attention to detail and guaranteequality, elegant and practical appliancesolutions.

Sydney Kay-CloughManaging Director

9

9

9

10

11

PEX Installation Guide for Gas Installations

Introduction to PEX Piping

What standard is our PEX manufactured and supplied to?

Technical Data for PEX

Advantages of PEX

PEX Fittings to Piping

22

25

35

43

52

53

54

59

64

65

Corrugated Stainless Steel Tubing, Fittings & Tooling

PEX Piping, Fittings & Tooling

Copper Tubing, Fittings & Tooling

Brass Fittings

Gas Valves

Gas Inline Manifolds

Gas Cylinders Assemblies

Gas Miscellaneous

Gas Cylinder Cages

Stainless Steel BSP Threaded Fittings

Copper Installation Guide for Gas Installations

12

12

16

18

The Basics

How to solder Copper tubes

Copper Coils to ASTM B280

Copper Tubes to SANS 460

Gas Piping, Fittings and Equipment

2 3

INTRODUCTION TO CORRUGATED

STAINLESS STEEL

TUBING (CSST)

Corrugated Stainless Steel Tubing (CSST) is a flexible, stainless steel tube used to supply natural gas and liquid petroleum gas in residential, commercial and industrial structures. Coated with an exterior plastic coating, CSST is usually routed beneath, through and alongside floor joists in your basement, trenching, inside interior wall cavities and on top of ceiling joists in ceiling spaces.

It has a non-conductive plastic jacket. By using stainless steel with high corrosion resistance in the construction of the tubing ensures safety and service life reaching 50 years. The inner stainless steel layer of typical residential CSST is .2 to .3 mm.

EN 15266 - Stainless steel pliable corrugated tubing kits in building for gas with an operating pressure up to 0,5 bar.

Test verification of conformity by Intertek.

Figure shows a digital representation of a how a CSST fitting looks inside.

CSST features many benefits over the traditional method in its durability and practicality. CSST has a proven resistance to leaks due to far fewer connections made during installation. When black steel pipe is installed, every time the pipe changes direction, a joint needs to be fitted and checked for leaks. CSST offers flexibility and is able to be snaked through walls and around obstacles with fittings placed only at the ends of the run.

Another benefit of this material is the amount of installation time it saves. By most estimates, CSST can be installed in a third of the time it takes to install black steel pipe. Even though CSST is more expensive than the traditional black steel pipe, its overall cost is less when factoring in labor and installation.

With CSST’s flexible design, leakages caused by earthquakes or buildings subsidence may be minimised.

CCST Gas piping systems should be bonded to the electrical service grounding electrode system according to the applicable standards.

WHAT STANDARD

IS OUR CCSTMANUFACTUREDAND SUPPLIED TO?

4 5

TECHNICAL DATA FOR CSST

Corrugated Stainless Steel Installation Guide for Gas Installations

DIMENSIONS (mm):

TYPE & SPECIFICATION DN 10 DN 32DN 25DN 20DN 15(I.D.) Dt 13.5 15 20.8 25 32(O.D.) Do 17 18.4 24.2 30.8 38

Corrugatedpipe

Soft coating layer Thickness 0.75

Outer diameter of coating

D 39.532.325.719.918.5

Air flow (M3/H)Nomial diameter

0.3 1.51.41.31.21.11.00.90.80.70.60.50.4 1.71.60.2 1.91.8

DN 10 2.45 77.4266.6456.3547.0439.2031.8525.2819.6014.709.605.393.721.52

DN 15 1.08 19.5016.8614.7012.5410.588.726.574.312.942.211.721.33 24.7922.05 30.8724.54

DN 20 3.532.842.251.861.571.371.180.98 4.614.02 5.685.10

DN 25 1.471.271.76 1.861.67 2.302.06


2.1 3.63.43.2 3.02.92.82.72.62.52.42.32.2 4.03.82.0 4.4 4.2

DN 10

DN 15 37.24 74.4869.5864.6860.7656.8452.4349.0045.0841.1633.81

DN 20 6.68 19.3117.2515.3913.5212.7411.9611.0710.299.608.828.317.55 23.2321.276.27 27.9325.48

DN 25 2.74 7.746.966.175.495.495.104.804.514.173.583.333.04 9.518.532.50 11.2710.49


4.8 7.57.06.86.66.46.26.05.85.65.45.25.0 8.58.04.6 10.09.0

DN 10DN 15DN 20 32.83 66.6462.7256.8453.9050.9647.0444.1041.1638.2235.7730.38

DN 25 13.43 31.3626.4625.9724.5023.0322.0520.5819.1117.9316.9515.6814.50 40.1835.2812.35 53.944.10

PRESSURE LOSS TABLE (Pa/m):

Above reveals the decompression per meter. The test method is to have a bend with a radius of 50mm in a 2 meter pipe section.

INSTALLATION

OF CSST - The installation must be done by SAQCC Registered Gas Practitioner in accordance with SANS 10087-1 for LPG and 827 for NG.- Care should be taken not to damage the tubing and fittings when transporting or shipping the goods. - Thorough inspection of the tubing should be conducted prior to the installation to make sure that there is no visable defects or damage to the tubing and fittings.- The correct tooling should be used when installing a Gas System in CSST.

6 7

CSST FITTINGS TO TUBING

IMPORTANT NOTES

- CSST tubing can be installed in ceilings, walling and in the ground.- CSST tubing must not be installed in direct sunlight, in a damp area or in a weak acid environment where the ph level is less than 7 such as swimming pool areas and chemical plants.- Although the tubing is designed to resist vibration it must not be installed in an area where it would be subject to constant vibration.

CSST piping and fittings should not touch any corrosive liquids such as oxalic acid, heavy duty detergents, pesticide and so on.

WHAT NOT TO DO WHEN INSTALLING CSST

INSTALLATION NOTES

When bending the tubing ensure that your inside radius is not smaller than the recommended installed bend radii according to ISO 10380/

EN15266. As illustrated below.

Inside radius = R

Do not twist the piping Do not stretch the piping

Do not dent the piping

Do not step on the piping Do not bent the piping smaller than the

suggested bending radius

CUTTING THE TUBING1Straighten the tube a 100mm on the roll and cut to the desired length leaving approximately 25mm for fitting attachment. The cut should be centered between two corrugations. Use a CSST Tube Cutter rotating in one direction to leave the tubing round and free of burrs.

STRIP OFF THE COATED LAYER2Using the CSST Coating Cutter, strip cover back to the valley of the second corrugation. Do not cut the cover in such a way that the sealing surface of the tubing is scored. Remove the short piece of cover by peeling the jacket off. Caution: Tube ends are sharp, use care when handling.

MAKE A NEAT CUT TO FIT THE CSST FITTING3

Use the CSST Tube Cutter to cut the now uncoated pipe to 7 corrugations. Ensure that it is a neat cut.

It is important to make sure that there is a neat cut left after step 3. Here are some examples of

rough cuts:

Leaving a “fin” Flattening the corrugation

Flattening the end Denting the corrugation

Leaving a bur

Absolute Min. Bend Radius

Suggested Bend Radius

19mm

76mm25mm19mm

75mm

125mm75mm75mm

Normal diameter

DN 10

DN 25DN 20DN 15

76mm 125mmDN 32

8

INSERT THE STRIPPED TUBE INTO THE MECHANICAL JOINT4

Insert the tubing all the way in making sure that the correct length was stripped off. The tube should press against the rubber gasket on the inside of the fitting and the outter coating should just fit though the seal.

REMOVE THE PLASTICSPACING RING5

TIGHTEN THE NUT6Use the propper tooling to tighten the nut to ensure a leak free joint.

DO A LEAK INSPECTION7Use professional gas detection instruments to carry out a leak detection test.

INTRODUCTIONTO PEX PIPING

PEX Piping Installation Guide for Gas InstallationsPEX-AL-PEX pipes or PEX/Aluminum/PEX pipes are made with a layer of aluminum sandwiched between two layers of PEX. The metal layer serves as an oxygen barrier, stopping the oxygen diffusion through the polymer matrix. The aluminum layer is thin, typically 1 or 2mm, and provides some rigidity to the tubes such that when bent it retains the shape formed (normal PEX tube will spring back to straight) The aluminum layer also provides additional structural rigidity such that the tube will be suitable for higher safe operating temperatures and pressures.

TECHNICAL DATA FOR PEX

CHARACTERISTIC REQUIREMENTSTEST ACCORDING TO: ISO 17484-1

Parameter Value Reference

Pressure 0.4 PDTemperature 80 °CConditioning 1500 h per 23 °C

Cone Test 10% Expansion

Resistance to gas constituents

≥ 20 h No delamination Annex C

PE or PE-X Annex DAt 100 °C

Strain 3%At 100 °C 0.25 Year

Thermal durability of the layer of M-pipes

No visual cracks in outer layer

Odorant permeabilityNo perception of THT smell by experienced

observer

Delamination: M-pipes Peel strength ≥ N/cm

Delamination: P-pipesNo cracks or delamination

Oxidation induction time ≥20 min

OdorantExposure

Temperature

THT+60 Days

23 °CAnnex F

TemperatureCycling test

Number of cycles

23 ° C- 20 °C / + 60 °C

10Annex E

Expansion

Temperature

10%(by cone with 15%

slope)Annex B

Temperature 200 °C ISO 11357-6

Test may be carried out at 210 C providing that there is clear correlation with the results at 200 °C in case of dispute, the reference temperature shall be 200 °C Oxidation induction.

SANS/ISO 17484-1 & AS 4176.8

9

WHAT STANDARD IS OUR PEX MANUFACTURED AND SUPPLIED TO?

CSST FITTINGS TO TUBING

10 11

PEX FITTINGTO PIPING

STEP ONE1Cut the pipe to the correct length, while using the correct Pex Pipe Cutter tool, A rough or ragged cut may result in a difficult or leaky connection.

STEP TWO2Insert the PEX Reamer tool into the newly cut pipe to ream the end and to create a neat shamfer. Ensure the shamfer created is not smaller than 2mm.

STEP THREE3Push the fitting into the pipe until it touches the fit-ting shoulder. Position the crimp sleeve +- 3mm from the end of the tube. This distance ensures the crimp sleeve is positioned directly over the ribs on the barb.

STEP FOUR4Centre the PEX Adjustable Crimper tool jaws over the sleeve. Hold the crimping tool at 90°C to the fitting and close the jaws completely. If you need to crimp the fitting more than two times you need to cut the fitting off and start over.

- COST EFFECTIVE:

Relatively cheaper than most piping systems

- TEMPERATURE AND PRESSURE RESISTANT:

Maximun up to 95 °C, 1-1 .25 Mpa. *Note ISO 17484 applies to systems that opperate at temperatures of - 20°C up to 60°C and maximum opperating pressure up to and including 500kPa (5 bar).

- EASY JOINTING /INSTALLATION:

With correct tooling jointing is simplified therefore reducing installation time extensively

- HIGH MECHANICAL STRENGTH:

Not easily damaged or cracked

- CORROSION RESISTANCE:

Resistant to acid, alkaline and salt solutions

- CLEANNESS AND HEALTH:

No harmful substance, mould proof, non-rusting and non-scaling

- LIGHT WEIGHT:

Arbitrary length with convenient installation

- FLEXIBLE AND NON-REBOUND:

Can be bent without being heated, reduced the use of fittings

- HEAT PRESERVATION:

1/100 heat conductivity of metal pipe, excellent heat preservation energy conservation

- ANTI-VIBRATION AND IMPACT RESISTANCE:

The composite material can effectively reduce and absorb the pipe vibration so as to lower the noise- LONG SERVICE LIFE:

High creep strength and long service life

ADVANTAGES OF PEX

THE BASICS

12 13

COPPER FITTING

Copper tube and fittings are ideally suited for the distribution of LP and Natural Gas. Only SAQCC Registered Gas Installers may undertake installation, extension or repair work on gas systems and their appliances. Copper tube and fittings are readily available and are compatible with each other. They are easily jointed by soldering, brazing or compression fittings to form mechanically strong, gas tight joints. Copper pipework can be easily prefabricated, which can reduce installation time. It is possible to bend copper tube easily and accurately using either flexible springs or bending machines. Copper pipework will last the life time of the building. Copper is 100% recyclable. All of the above factors lead to an easier, cleaner, less time consuming installation. Copper piping should be sleeved when embedded into concrete.

HOW TO

SOLDER COPPER TUBES

1. TOOLING AND EQUIPMENT

Start by getting the right tools, and measuring the copper tube. This expert step by step procedure will guide you through the process on how to cut copper properly and have a leak-free joint. Tools needed:

• Copper Cutter• Wire Brush• Abrasive cloth• Paste Flux • Lead-free Solder• Propane Torch• Gloves• Safety goggles

Copper Installation Guide for Gas Installations

Apply flux carefully.

Flux needs to be applied evenly at pipe ends and inside the fittings. This product will prevent the copper tube from oxidizing as you heat the copper, so it will start to boil when it is hot enough to solder. There is no benefit if you use a lot of flux, as it will only lead to corrosion inside the copper tube. Do not use bare hands to apply flux or avoid being in contact with flux as its chemicals might be harmful to the skin. Remove excess flux with a cotton cloth.

Start by using a measuring tape to mark where the copper will be cut. Using a tube cutter, cut the copper tubing. Using the cutter is very easy, as you will only need to hold the tube between the cutting wheel and rotate the cutter. The wheel will start to score the tube all the way around. Keep turning, while tightening the cutter so it can score deeper. Repeat as needed. This procedure is valid for all types of copper.

2. START BY MEASURING AND CUTTING COPPER

3. REAM AND CLEAN THE COPPER

After the tube has been cut, it needs to be cleaned to have a proper bonding surface. Copper cutters normally are equipped with a reaming blade that can be used to clean all burrs created after the tube has been cut. Do not apply extra pressure as it might deform the tube. Clean the tube by using sand paper, steel wool or a wire brush that can fit inside the copper tube. It should have a shiny look and cannot have any oxidation marks. Do not limit your-

self to the area that will be used for the joint, as you will need to clean a little bit more than the area on which the joint will be to allow for a proper connection. Do not over clean the copper as it might reduce the strength of the copper tube. Avoid touching the copper tube with your bare hands, and even if the tube is new, it must be cleaned.

4. WHAT IS FLUX FOR?

6. APPLYING THE SOLDER

14

It is important to use only recommended solders, no solders containing lead shall be used. Only solder that complies with S19 and S20 of SANS 24 shall be used for capillary fittings.

5. SOLDERING COPPER TUBES: SOLDER TYPES

Solder will create a silver band.

Once the fitting or tube is in place, start by applying solder at the top of the joint and once it is heated it will start to drip all the way to the bottom of the joint.When it begins to melt, push the solder into the joint and maintain the torch away from the tube. The joint should have a silver band all around it, but you still need to verify that it is actually good. Some experts will recommend to start at the bottom to create a dam that will prevent from using more solder than required. Propane torches are ideal for small jobs, while acetylene used for pipes larger than 3/4 inch.

• Do not solder copper tubing when gas is still running or in the tube. Purge the tube from gas before starting.

• Torches can be lit preferably with a flint striker. Matches and lighters can be dangerous.• Heat the copper tube before soldering and apply heat to both sides.• Be sure that pressure inside the copper tube is released before soldering.• Heat the joints of the copper tube from several sides.• Make sure the solder fills the joint on all sides.• Rotate the torch around the tube for even heat distribution.• Brass fittings will require extra heat.• Set the flame on medium or high to generate enough heat to melt solder. If your flame

is adjusted correctly, it will burn different shades of blue.• Remove any plastic caps or adapters from the copper tube to avoid ruining them.• Always look beyond the tube. Extremely hot temperatures are beyond the visible

portions of the flame.

7. COPPER SOLDERING TIPS

15

4

COPPER COILS TO ASTM B280DIMENSIONS (All sizes In mm except where inch specified) COPPER

COILS TO ASTM B280NOMINAL SIZE OD MEAN OD AAP WT MEAN WT AAPOD(mm) WT

3.18 0.51

4.75 0.61

6.35 0.61

7.94 0.61

9.53 0.61

12.70 0.71

15.88 0.71

19.05 0.81

22.23 1.14

MAX MIN

3.21 3.15

4.79 4.73

5.35 5.32

7.97 7.91

9.58 9.50

12.73 12.67

15.91 15.85

19.08 19.02

22.26 22.2

MAX MIN

3.23 3.13

4.83 4.69

5.45 5.25

8.08 7.82

9.67 9.39

12.89 12.51

16.12 15.64

19.34 18.76

22.56 21.9

MAX MIN

0.51 0.48

0.61 0.58

0.61 0.58

0.61 0.58

0.61 0.58

0.71 0.68

0.71 0.68

0.81 0.78

1.17 1.11

MAX MIN

0.65 0.47

0.66 0.56

0.66 0.56

0.66 0.56

0.66 0.56

0.77 0.65

0.77 0.65

0.87 0.75

1.25 1.03

TOLERANCESNOMINAL SIZE OD MEAN WT MEAN WT AAP

OD(mm) WT

3.18 0.51

4.75 0.61

6.35 0.61

7.94 0.61

9.53 0.61

12.70 0.71

15.88 0.71

19.05 0.81

22.23 1.14

+/- +/-

0.03 0.05

0.03 0.07

0.03 0.10

0.03 0.12

0.03 0.14

0.03 0.19

0.03 0.24

0.03 0.29

0.03 0.65

% PLUS

3.00 0.00

3.00 0.00

3.00 0.00

3.00 0.00

3.00 0.00

3.00 0.00

3.00 0.00

3.00 0.00

3.00 0.03

MINUS PLUS

0.03 0.04

0.03 0.05

0.03 0.05

0.03 0.05

0.03 0.05

0.03 0.06

0.03 0.06

0.03 0.06

0.03 0.11

MINUS %

0.04 16.00

0.05 16.00

0.05 16.00

0.05 16.00

0.05 16.00

0.06 16.00

0.06 16.00

0.06 16.00

0.11 19.30

PACKAGINGNOMINAL SIZE BOX WEIGHT (KG) BOX DIMENSIONS (MM)

OD(mm) WT

3.18 0.51

4.75 0.61

6.35 0.61

7.94 0.61

9.53 0.61

12.70 0.71

15.88 0.71

19.05 0.81

22.23 1.14

KG

0.6910 25

1.0802 22

1.4941 12

1.9080 10

2.3219 8

3.6326 6

4.5961 5

6.3045 4

10.2595 3

NW GW

14.53 15.98

16.16 17.78

17.93 19.72

19.08 20.99

18.57 20.43

21.80 23.98

22.98 25.28

25.22 27.74

30.78 33.86

W L

300 300

400 400

380 380

380 380

430 430

490 490

540 540

580 580

- -

H

95

95

185

185

185

185

185

185

-

OD AAP OVALITY ECCEN

MASS/COIL 15.24M

NUMBER OF COILS/BOX

A) CHEMICAL COMPOSITION:

B) TEMPER:

C) GRAIN SIZE:

D) COIL LENGTH:

E) CLEANLINESS:

F) SOUNDNESS:

G) FORMABILITY:

H) TENSILE REQUIREMENTS:

I) PACKAGING:

J) MILL TEST CERTIFICATE:

Copper 99.90% min, Phosperous 0.015-0.040% (ASTM B280, Alloy C12200

060 (Soft annealed)

0.035 min accourding to test method E112

15.24Mm Tolerance + 300mm /-0

Bore- visually free of carbon deposit, Residual residue limit max 0.038g/m3

Eddy Current Test

Flaring-no cracking at 40% expansion on 60º cone

Tensile strength 205 mpa min, Elongation 40% min

Ends capped, Individually sealed in plastic bags, Packed in cardboard box

Chemical Analysis / Temper / Dimension / Tensile / Hardness / Expansion / Flattening / Bore / Cleanliness / Grain Size / Soundness

Capillary solder fittings accourding to ASTM B16.22 should be used with copper tubes to ASTM B280

17

OD(inch)

1/8

3/16

1/4

5/16

3/8

1/2

5/16

3/4

7/8

OD(inch)

1/8

3/16

1/4

5/16

3/8

1/2

5/16

3/4

7/8

4

OD(inch)

1/8

3/16

1/4

5/16

3/8

1/2

5/16

3/4

7/8

16

Note: For all manufacturing and testing requirements refer to SANS 460

• Capillary solder fittings according to SANS 1067-2 should be used with copper tubes to SANS 460

18

COPPER TUBES TO SANS 460 COPPER TUBES TO SANS 460

19

NORMAL SIZE OF TUBE

OUTSIDE DIAMETER

MAX MIN

WALL THICKNESS CLASS 0

EXTRA LIGHT

THEORETICAL MASSCLASS 0

KG PER METER


LIGHT


KG PER METER

(mm)*1215*1822283542546776

108

(mm) (mm)12.045 11.95515.045 14.95518.045 17.95522.055 21.94528.055 27.94535.070 34.93042.070 41.93054.070 53.93066.750 66.60067.170 76.030

108.070 107.930

(mm) (mm) (mm) (mm)0.50 0.161 0.60 0.1920.50 0.203 0.70 0.2800.60 0.292 0.80 0.3850.60 0.360 0.90 0.5320.60 0.460 0.90 0.6830.75 0.719 1.20 1.1360.90 1.036 1.20 1.3711.20 1.774 1.20 1.7741.50 2.751 1.50 2.7511.70 3.537 1.70 3.5372.30 6.807 2.30 6.807

NORMAL SIZE OF TUBE

OUTSIDE DIAMETER

MAX MIN

WALL THICKNESS CLASS 2MEDIUM


KG PER METER


HEAVY


KG PER METER

(mm)*1215*1822283542546776

108

(mm) (mm)12.045 11.95515.045 14.95518.045 17.95522.055 21.94528.055 27.94535.070 34.93042.070 41.93054.070 53.93066.750 66.60067.170 76.030

108.070 107.930

(mm) (mm) (mm) (mm)1.0 0.192 1.0 0.3081.0 0.280 1.2 04641.0 0.385 1.2 0.5641.0 0.532 1.5 0.8611.2 0.683 1.5 1.1131.5 1.136 2.0 1.8481.5 1.371 2.0 2.2401.5 1.774 2.5 3.6052.0 2.751 2.5 4.5152.0 3.537 2.5 5.1522.5 6.807 3.2 9.390

Tube markings according to SANS 460. Tube lengths are 5.5 meters long.Sizes indicated by the star (*) are non-preferred sizes.

GUIDE TO GENERAL APPLICATION FOR THE DIFFERENT CLASSES OF COPPER TUBES

The choice of a suitable class of copper tube will depend on the particular application and could be influenced by environmental factors (such as soil conditions etc), Reference to the manufac-turer or to a relevant technical body is recommended in cases of uncertainty. Purely as a guide,

the following text is offered for assistance in the selection of an appropriate class of copper tube:

CLASS 0YELLOW CAPS

• Extra light weight and gauge• Suitable for general domestic plumbing services (water only)• Suitable when minimization of costs affects choice• Not recommended for flare-type compression fittings• Only to be used for straight line connections (not suitable for deforming into bends)• Not suitable for Gas installations

CLASS 1ORANGE CAPS

• Light weight and gauge• Suitable for general domestic plumbing services and gas installations (water and gas)• Bendable by trained workmen with tube bending equipment designed for this class tube

CLASS 2BROWN CAPS

• Suitable for general domestic plumbing services (water and gas)• Medium gauge

CLASS 3NO CAPS

• Heavy gauge• Suitable for underground use, steam services etc water and gas)• Can be exposed to physical abuse

Note:Class 0 (extra light) is not permitted to be used in Gas installations

22-24

25-34

35-42

43-51

52-53

53-54

54-59

59-64

64

65-69

Gas Piping, Fittings & Equipment

Corrugated Stainless Steel Tubing, Fittings & Tooling

PEX Piping, Fittings & Tooling

Copper Tubing, Fittings & Tooling

Brass Fittings

Gas Valves

Gas Inline Manifolds

Gas Cylinders Assemblies

Gas Miscellaneous

Gas Cylinder Cages

Stainless Steel BSP Threaded Fittings

20 21

INDEX

22 23

CORRUGATED STAINLESS STEEL

ITEM TYPE: ITEM DESCRIPTION: ITEM CODE:

(CSST) CORRUGATED STAINLESS STEEL TUBING - EN15266

CSST 1/2 CORRUGATED TUBE NJRFB12-50

NJRFB1-50

NJRFB34-50

CSST 1 CORRUGATED TUBE

CSST 3/4 CORRUGATED TUBE

(CSST) CORRUGATED STAINLESS STEEL MECHANICAL FITTINGS - EN15266

CSST 1/2 MALE MECHANICAL JOINT NKRBJ12MR

NKRBJ1MR

NKRBJ34MR

CSST 1 MALE MECHANICAL JOINT

CSST 3/4 MALE MECHANICAL JOINT

CSST 1/2 FEMALE MECHANICAL JOINT NKRBJ12FG

NKRBJ1FG

NKRBJ34FG

CSST 1 FEMALE MECHANICAL JOINT

CSST 3/4 FEMALE MECHANICAL JOINT

CSST 1 MECHANICAL TEE NKRBJ1X3

NKRBJ34X3

NKRBJ12X3

CSST 3/4 MECHANICAL TEE

CSST 1/2 MECHANICAL TEE


CSST 1/2 MECHANICAL JOINT NKRBG-IX-S15Ax1

NKRBG-IX-S34Ax3CSST 3/4 MECHANICAL JOINT

CSST M30x2 2-R1/2 3 WAY T-SPLITTER NK1410601015

NK1410603025CSST M30x2 G1/2 G3/4 3 WAY F-SPLITTER

CSST PIPING:

CSST MALE MECHANICAL JOINT:

CSST FEMALE MECHANICAL JOINT:

CSST MECHANICAL TEES:

CSST MECHANICAL COUPLING:

CSST MECHANICAL 3 WAY SPLITTERS:

24 25



PE(X) END CAP S16 NCD1216

NCD1620PE(X) END CAP S20

PEX FITTINGS - SANS/ISO 17484-1 & AS 4176.8

PE(X) EQUAL STRAIGHT S16 NCM-1-0101

NCM-1-0103PE(X) EQUAL STRAIGHT S20





PEX PIPING - SANS/ISO 17484-1 & AS 4176.8

PIPE PE(X)-AL-PE(X) S16 NB1216PE(X)

PEX




(CSST) CORRUGATED STAINLESS STEEL TOOLING

CSST COATING CUTTER NLGJ10

CSST TUBE CUTTER NLGJ16

CSST COATING CUTTER:

CSST TUBE CUTTER:

CSST DN15 TUBE FLATTENER NL1420501002

CSST TUBE FLATTENER:

PEX PIPING:

PEX END CAPS:

PEX EQUAL STRAIGHT:

26 27

ITEM TYPE: ITEM DESCRIPTION: ITEM CODE: ITEM TYPE: ITEM DESCRIPTION: ITEM CODE:

NCM-1-0430PE(X) FEMALE DEMOUNTABLE UNION H16x1/2F

PE(X) REDUCER S20 x 16 NCM-1-0202

PE(X) MALE STRAIGHT S16 x 1/4M NCM-1-0299

NCM-1-0301

NCM-1-0300

PE(X) MALE STRAIGHT S16 x 1/2M



NCM-1-0305

NCM-1-0304A



NCM-1-0306PE(X) MALE STRAIGHT S20 x 3/4M

PE(X) FEMALE STRAIGHT S16 x 1/2F NCM-1-0401

NCM-1-0403

NCM-1-0402

PE(X) FEMALE STRAIGHT S16 x 1F

PE(X) FEMALE STRAIGHT S16 x 3/4F








PE(X) FEMALE STRAIGHT S20 x 1F NCM-1-0409


NCM-1-0412

NCM-1-0411

PE(X) FEMALE STRAIGHT S25 x 1F

PE(X) FEMALE STRAIGHT S25 x 3/4F



PE(X) FEMALE STRAIGHT S32 x 1F NCM-1-0415

NCM-1-0416PE(X) FEMALE STRAIGHT S32 x 1 1/4F

PE(X) FEMALE STRAIGHT S32 x 1 1/2F NCM-1-0417

PEX REDUCERS:

PEX MALE STRAIGHT:

PE(X) MALE STRAIGHT S20 x 1M NCM-1-0307

NCM-1-0308

NCM-1-0307A




NCM-1-0311

NCM-1-0310


PE(X) MALE STRAIGHT S25 x 1M

NCM-1-0312PE(X) MALE STRAIGHT S32 x 3/4M

NCM-1-0313PE(X) MALE STRAIGHT S32 x 1M

NCM-1-0314PE(X) MALE STRAIGHT S32 x 1 1/4M

PEX FEMALE STRAIGHT:

PEX FEMALE DEMOUNTABLE UNION:






28 29


PEX EQUAL ELBOWS:

PE(X) EQUAL ELBOW L16 NCM-1-0501




PE(X) UNEQUAL ELBOW L20 x 16 NCM-1-0702

NCM-1-0706

NCM-1-0704

PE(X) UNEQUAL ELBOW L25 x 20


PE(X) UNEQUAL ELBOW L32 x 16 NCM-1-0707

NCM-1-0710

NCM-1-0709



PEX UNEQUAL ELBOWS:

PE(X) MALE ELBOW L16 x 1/2M NCM-1-0801

NCM-1-0805

NCM-1-0802

PE(X) MALE ELBOW L20 x 1/2M


PE(X) MALE ELBOW L20 x 3/4M NCM-1-0806

NCM-1-0807

NCM-1-0806A


PE(X) MALE ELBOW L20 x 1M

PEX MALE ELBOWS:

NCM-1-0808PE(X) MALE ELBOW L25 x 3/4M

PE(X) MALE ELBOW L25 x 1M NCM-1-0809

NCM-1-0811

NCM-1-0810



NCM-1-0813

NCM-1-0812

PE(X) MALE ELBOW L32 x 1 1/4M

PE(X) MALE ELBOW L32 x 1M

PE(X) FEMALE ELBOW L16 x 1/2F NCM-1-0901

NCM-1-0905

NCM-1-0902

PE(X) FEMALE ELBOW L20 x 1/2F



PE(X) FEMALE ELBOW L20 x 1F NCM-1-0906A



NCM-1-0910

NCM-1-0909


PE(X) FEMALE ELBOW L25 x 1F


PE(X) FEMALE ELBOW L32 x 1F NCM-1-0912

PEX FEMALE ELBOWS:

PE(X) EQUAL TEE T16 NCM-1-1101

NCM-1-1104

NCM-1-1103

PE(X) EQUAL TEE T25

PE(X) EQUAL TEE T20

PE(X) EQUAL TEE T32 NCM-1-1105

PEX EQUAL TEES:

PE(X) UNEQUAL TEE T16 x 20 x 16 NCM-1-1202

NCM-1-1207

NCM-1-1203

PE(X) UNEQUAL TEE T20 x 16 x 20

PE(X) UNEQUAL TEE T16 x 25 x 16

PEX UNEQUAL TEES:



30 31

ITEM TYPE: ITEM DESCRIPTION: ITEM CODE:ITEM TYPE: ITEM DESCRIPTION: ITEM CODE:

PEX UNEQUAL TEES:

PEX FEMALE TEES:

PEX FEMALE TEES:

PE(X) MALE TEE T16 x 1/2M x 16 NCM-1-2801

NCM-1-2803

NCM-1-2802

PE(X) MALE TEE T20 x 1/2M x 20


PE(X) MALE TEE T20 x 3/4M x 20 NCM-1-2804

NCM-1-2806

NCM-1-2805



PEX MALE TEES:

PE(X) O-RING S16 NCOR16G

NCOR25G

NCOR20G

PE(X) O-RING S25

PE(X) O-RING S20

PE(X) O-RING S32 NCOR32G

PEX O-RINGS:

PE(X) CLAMP PVC S16 NCPCP1216

NCPCP2025PE(X) CLAMP PVC S25

PEX PVC CLAMPS:













NCM-1-1310PE(X) FEMALE TEE T25 x 1F x 25

NCM-1-1311PE(X) FEMALE TEE T32 x 1/2F x 32

PE(X) FEMALE TEE T32 x 3/4F x 32 NCM-1-1312

NCM-1-1313PE(X) FEMALE TEE T32 x 1F x 32


NCM-1-1305

NCM-1-1302

PE(X) FEMALE TEE T20 x 1/2F x 20



NCM-1-1308

NCM-1-1307


PE(X) FEMALE TEE T20 x 1F x 20





32 33


PEX METAL CLAMPS:

PE(X) CLAMP METAL S16 NCPCM1216




PEX SLEEVES:

PE(X) STAINLESS SLEEVE S16 NCSSS1216




PEX BAFFLES:

PE(X) BAFFLE S16 NCZBAFFLE16




PEX TO HOSETAIL:

PE(X) S16 TO HOSE TAIL 8mm NGPEX-001

PE(X) S16 TO 15mm SOLDER NGPEX-003

NGPEX-004PE(X) S16 TO 22mm SOLDER

PEX TO SOLDER:

PE(X) S16 TO 5/16 COMPRESSION NGPEX-005

NGPEX-005A PE(X) S16 TO 3/8 COMPRESSION

PEX TO COMPRESSION:

PEX TOOLS

PE(X) ADJ CRIMPER + INSERTS S16 20 NEMAC1620

NEMAC1632 PE(X) ADJ CRIMPER + INSERTS S16 20 25 32

PEX ADJUSTABLE MANUAL CRIMPER WITH INSERTS:

PE(X) CRIMPING INSERT S16 NEMACI1216

NEMACI1620 PE(X) CRIMPING INSERT S20

PEX REPLACEMENT CRIMPER INSERTS:

PE(X) CRIMPING INSERT S25 NEMACI2025

NEMACI2632 PE(X) CRIMPING INSERT S32

34 35



PEX INNER BENDING SPRING:

PE(X) BENDING SPRING INNER S16 NEBS1216



PEX OUTER BENDING SPRING:

PE(X) BENDING SPRING OUTER S16 NEOBS1216



PEX PIPE CUTTER:

PE(X) PIPE CUTTER S16-32 NEPC16-32

PEX REAMER:

PE(X) REAMER S16-25 NEPR162025

COPPER

COPPER PANCAKE COILS SOFT - ASTM B280 (15.24M LENGTHS)

COPPER TUBE SOFT 1/8 3.18mm 0.51wt NRTCS03.18

NRTCS06.35 COPPER TUBE SOFT 1/4 6.35mm 0.61wt

COPPER COILS SOFT:





COPPER TUBES HARD - ASTM B280 (5.5M LENGTHS)

COPPER TUBE HARD 1/4 6.35mm 0.61wt NRTCH06.35

NRTCH09.53 COPPER TUBE HARD 3/8 9.53mm 0.61wt

COPPER TUBES HARD:

COPPER TUBE HARD 1/2 12.7mm 0.71wt NRTCH12.70

NRTCH15.88 COPPER TUBE HARD 5/8 15.88mm 0.71wt

36 37


COPPER CAPILLARY FITTINGS - ASTM B16.22

COPPER ELBOWS 90 DEGREE SHORT RADIUS:

COPPER ELBOW 1/4 90deg SR NSAA006




COPPER ELBOWS 90 DEGREE LONG RADIUS:

COPPER ELBOW 3/8 90deg LR NSAB010



COPPER ELBOWS 45 DEGREE:

COPPER ELBOW 1/4 45deg NSAC007




COPPER ELBOWS 90 DEGREE STREET:

COPPER ELBOW 3/8 STREET NSAD010



COPPER EQUAL COUPLING 1/4 NSBA006

NSBA010COPPER EQUAL COUPLING 3/8

COPPER EQUAL COUPLING:

COPPER EQUAL COUPLING 1/2 NSBA015

NSBA016COPPER EQUAL COUPLING 5/8

COPPER REDUCING COUPLING 3/8 x 1/4 NSBB010006

NSBB015006COPPER REDUCING COUPLING 1/2 x 1/4

COPPER REDUCING COUPLING:





COPPER REDUCING BUSH 3/8 x 1/4 NSBC010006

NSBC015006COPPER REDUCING BUSH 1/2 x 1/4

COPPER REDUCING BUSH:


NSBC016010COPPER REDUCING BUSH 5/8 x 3/8


COPPER EQUAL TEE 1/4 NSCA006

NSCA010COPPER EQUAL TEE 3/8

COPPER EQUAL TEE:

COPPER EQUAL TEE 1/2 NSCA015

NSCA016COPPER EQUAL TEE 5/8

38 39


COPPER END CAPS:

COPPER END CAPS 1/2 NSDA015

COPPER END CAPS 5/8 NSDA016

COPPER TUBE STRAPS:

COPPER TUBE STRAPS 1/4 NSEA006




COPPER COILS SOFT:

COPPER TUBES CAPILARY 4mm x 0.6mm wt NVTUBE004M

COPPER TUBES HARD 15mm CLASS 1 NVTUBE015M

COPPER CAPILARY COILS SOFT - ASTM B360 (30M LENGTHS)

COPPER CAPILLARY FITTINGS - SANS 1067-2


COPPER ELBOW 90 DEG 15mm NWAA015M

COPPER ELBOW 90 DEG 22mm NWAA022M


COPPER ELBOW 45 DEG 15mm NWAB015M

COPPER ELBOW 45 DEG 22mm NWAB022M

COPPER TUBES HARD 22mm CLASS 1 NVTUBE022M

COPPER TUBES HARD - SANS 460 (5.5M LENGTHS)

COPPER TUBES HARD CLASS 1:

40 41


COPPER SLIP COUPLER:

COPPER SLIP COUPLER 15mm NWBB015M

COPPER SLIP COUPLER 22mm NWBB022M

COPPER REDUCING COUPLER:

COPPER REDUCING COUPLER 22mm x 15mm NWBC022015M

COPPER FITTING REDUCER:

COPPER FITTING REDUCER 22mm x 15mm NWBD022015M

COPPER END CAPS:

COPPER END CAP 15mm NWCA015M

COPPER END CAP 22mm NWCA022M

COPPER EQUAL TEE:

COPPER EQUAL TEE 15mm NWDA015M

COPPER EQUAL TEE 22mm NWDA022M

COPPER REDUCING TEE:

COPPER REDUCING TEE 15mm x 15mm x 22mm NWDB015015022M




COPPER REDUCING ELBOWS:

COPPER REDUCING ELBOW 90 DEG 22mm x 15mm NWAC022015M

COPPER STRAIGHT COUPLER:

COPPER STRAIGHT COUPLER 15mm NWBA015M

COPPER STRAIGHT COUPLER 22mm NWBA022M

42 43



BRAZETEC S-94 COPPER RODS 2.0 / KG NTGM008A

COPPER RODS 2.0 / ROD NTGM009A

COPPER JOINTING EQUIPMENT

COPPER JOINTING EQUIPMENT:

UNIVERSAL TORCH EXTENSION WH0159 NUHTG0608

BZ8250T TORCH & HOSE WITHOUT MAPP NUHTG0612

TS4000T TORCH NUHTG0613

TX9 PROPANE CYLINDER NUHTH0420

MG9 MAPP GAS CYLINDER NUHTH0421

UNEQUAL STUD 3/8 MALE x 5/16 COMPRESSION NFAB010008


UNEQUAL STUD 3/8 MALE x 15mm COMPRESSION NFAB010015M





COPPER FULL CROSSOVERS:

COPPER CROSSOVER 15mm NWEA015M

COPPER CROSSOVER 22mm NWEA022M

COPPER SOLDER & RODS

SOLDER & RODS:

BRAZETEC 3076U FLUX COATED 30% 1.5/ KG NTGM0030

SILVER SOLDER FLUXED 30% / ROD NTGM0031

BRAZETEC 2009 SILVER SOLDER 20% 1.5 / KG NTGM0040

SILVER SOLDER UNFLUXED 2009 20% / ROD NTGM0041

GAS BRASS FITTINGS

EQUAL MALE STUDS:

EQUAL STUD 1/4 MALE x 1/4 COMPRESSION NFAA006



UNEQUAL MALE STUDS:






BRASS

44 45


EQUAL COMPRESSION COUPLINGS:

EQUAL COUPLING 1/4 COMPRESSION NFCA006




EQUAL COUPLING 15mm COMPRESSION NFCA015M

UNEQUAL COMPRESSION COUPLINGS:

UNEQUAL COUPLING 1/4 x 5/16 COMPRESSION NFCB006008



UNEQUAL COUPLING 1/4 x 15mm COMPRESSION NFCB006015M







OLIVES:

OLIVE 1/8 OD NFDA003






OLIVE 15mm OD NFDA015M

UNEQUAL FEMALE STUDS:

UNEQUAL STUD 1/4 FEMALE x 5/16 COMPRESSION NFBB006008



UNEQUAL STUD 1/4 FEMALE x 15mm COMPRESSIO NFBB006015M




UNEQUAL STUD 3/8 FEMALE x 15mm COMPRESSIO NFBB010015M



NFBB015010

NFBB015015M

UNEQUAL STUD 1/2 FEMALE x 3/8 COMPRESSION

UNEQUAL STUD 1/2 FEMALE x 15mm COMPRESSIO

EQUAL FEMALE STUDS:

EQUAL STUD 1/4 FEMALE x 1/4 COMPRESSION NFBA006



COMPRESSION NUTS:

COMPRESSION NUTS 1/4 FEMALE NFEA006




COMPRESSION NUTS 15mm FEMALE NFEA015M

OLIVE 22mm OD NFDA022M

46 47


HEX REDUCING SOCKETS:

HEX REDUCING SOCKET 3/8 x 1/4 FEMALE NFGB010006






FEMALE TO MALE ADAPTERS:

ADAPTER 3/8 FEMALE x 1/4 MALE NFHA010006






REDUCING BUSHES:

HEX REDUCING BUSH 3/8 MALE x 1/4 FEMALE NFIA010006






HEX NIPPLES:

HEX NIPPLE 1/4 MALE NFFA006




HEX NIPPLE 1 MALE NFFA025

HEX REDUCING NIPPLES:

HEX REDUCING NIPPLE 3/8 x 1/4 MALE NFFB010006






HEX SOCKETS:

HEX SOCKET 1/4 FEMALE NFGA006




48 49


ADAPTER UNEQUAL 3/8 MALE x 15mm SOLDER NFKB010015M

ADAPTER UNEQUAL 1/2 MALE x 1/4 SOLDER NFKB015006

FEMALE TO SOLDER EQUAL ADAPTER:



ADAPTER EQUAL 1/4 FEMALE x 1/4 SOLDER NFKC006006



ADAPTER UNEQUAL 1/4 FEMALE x 5/16 SOLDER NFKD006008



ADAPTER UNEQUAL 1/4 FEMALE x 15mm SOLDER NFKD006015M






FEMALE TO SOLDER UNEQUAL ADAPTER:





HEX FEMALE CAPS:

HEX PLUG - CAP 1/4 FEMALE NFJB006




MALE TO SOLDER EQUAL ADAPTER:

ADAPTER EQUAL 1/4 MALE x 1/4 SOLDER NFKA006006







MALE TO SOLDER UNEQUAL ADAPTER:




HEX MALE PLUGS:

HEX PLUG 1/4 MALE NFJA006




MALE TO SOLDER UNEQUAL ADAPTER:

50 51


MALE TO HOSE TAIL ADAPTER:

HEX HOSE TAIL 1/4 MALE NFLA006



HEX HOSE TAIL COOKER 1/2 MALE NFLA015C

FEMALE TO HOSE TAIL ADAPTER:

HEX HOSE TAIL 1/4 FEMALE NFLB006



HEX HOSE TAIL COOKER 1/2 FEMALE NFLB015C

COMPRESSION TO HOSE TAIL ADAPTER:

HEX HOSE TAIL 5/16 COMPRESSION NFLC008



HEX HOSE TAIL 15mm COMPRESSION NFLC015M

SOLDER TO HOSE TAIL ADAPTER:

HEX HOSE TAIL 5/16 SOLDER NFLD008



HEX HOSE TAIL 15mm SOLDER NFLD015M


HOSE TAIL T-PIECE:

HOSE TAIL T-PIECE 8mm NFMATP

HOSE TAIL X-PIECE:

HOSE TAIL X-PIECE 8mm NFMAXP

HOSE TAIL Y-PIECE:

HOSE TAIL Y-PIECE 8mm NFMAYP

HOSE TAIL STRAIGHT PIECE:

HOSE TAIL STRAIGHT PIECE 8mm NFMASP

52 53

ITEM CODE:ITEM TYPE: ITEM DESCRIPTION:

BALL VALVES BUTTERFLY HANDLE PEX:

VALVE BALL PE(X) S16 PN40 INLINE BH NDPEXBV1216




PEX INLINE MANIFOLDS - SANS/ISO 17484-1 & AS 4176.8

INLINE MANIFOLDS:

MANIFOLD INLINE 1 FEMALE 2 OUTLETS NIDFM1X2-16



INLINE MANIFOLDS

INLINE MANIFOLD BRAKETS:

MANIFOLD INLINE 1 FEMALE BRACKETS NIDFMB-16


BALL VALVES LEVER HANDLE FEMALE THREAD:

VALVE BALL 1/4 FEMALE PN40 INLINE LH NDGBV40LH1/4




BALL VALVES BUTTERFLY HANDLE COMPRESSION TO HOSETAIL:

VALVE BALL COMPRESSION S16 HOSE PN40 BH NDGCVBH1216

VALVES

GAS BALL VALVES - EN331 & AS 4617

BALL VALVES BUTTERFLY HANDLE FEMALE THREAD:

VALVE BALL 1/4 FEMALE PN40 INLINE BH NDGBV40BH1/4




54 55

ITEM TYPE: ITEM DESCRIPTION: ITEM CODE: ITEM CODE:ITEM TYPE: ITEM DESCRIPTION:

COMPACT LENGTH VAPOUR MANIFOLDS:

DOUBLE 2 COMPACT VAPOUR MANIFOLD NNMF2VC









LIQUID MANIFOLDS - SANS 10087-1:

STANDARD LENGTH LIQUID MANIFOLDS:

DOUBLE 2 LIQUID MANIFOLD COMPLETE NOMF2L









INLINE MANIFOLD PLUGS:

MANIFOLD INLINE 1 MALE PLUG O-RING NIDFMP-1

CYLINDER ASSEMBLIES

VAPOUR MANIFOLDS - SANS 10087-1:

STANDARD LENGTH VAPOUR MANIFOLDS:

DOUBLE 2 VAPOUR MANIFOLD COMPLETE NNMF2V









56 57


COMPLETE REGULATOR ASSEMBLIES:

COMPLETE MANUAL C/OVER REG ASSEMBLY NQREG

COMPLETE REGULATOR ASSEMBLIES - SANS 10087-1:

SINGLE HOSE REGULATOR ASSEMBLY NQREG3

CHANGE OVER VALVE:

MANUAL CHANGE OVER VALVE BARE NAREG1

CHANGE OVER VALVES - SANS 10087-1:

TEE FITTINGS WITH GAUGE CYLINDER INDICATION:

TEE FITTING WITH GAUGE FOR CHANGE OVER NAREG1TG

TEE FITTINGS WITH GAUGE FOR CHANGE OVER VALVE - SANS 10087-1:

PIGTAILS:

INV FLARE PIGTAIL STD NPPT1

LIQUID PIGTAILS 1 MTR NPPT5

INV FLARE PIGTAIL 1MTR NPPT6

PIGTAILS - SANS 10087-1:

1/4 NPT VAPOUR PIGTAIL 1MTR NPPT2

1/4 NPT VAPOUR PIGTAIL STD NPPT3

LIQUID PIGTAILS STD NPPT4

COMPACT LENGTH LIQUID MANIFOLDS:

DOUBLE 2 COMPACT LIQUID MANIFOLD NOMF2LC









58 59


PRESSURE GAUGES:

P. GAUGE MOD 111.10 63mm 0-250kPa OUT 6 NM38205033

PRESSURE GAUGES:

P. GAUGE MOD 111.10 63mm 0-250kPa OUT 12 NM38205033A

UV RESISTANT CONDUIT SPLIT SPRAGUE:

UV CONDUIT SPLIT SPRAGUE FOR S16 PEX NHCON16

UV RESISTANT CONDUIT SPLIT SPRAGUE

MISCELLANEOUS ITEMS

UV CONDUIT SPLIT SPRAGUE FOR S25 PEX NHCON25

LOW PRESSURE BULL NOSE & IN-LINE REGULATORS - SANS 1237

LOW PRESSURE REGULATORS:

1.2KG 2.8kPa LP BULL NOSE REGULATOR NAREG1.2LPBN

12KG 2.8kPa LP REG ASTRO 1/4X1/2 NAREG12LP

12KG 2.8kPa LP REG CGAS 1/4X3/8 PG NAREG12LPA

4KG 2.8kPa LP REG ASTRO 1/4X3/8 NAREG2

4KG 2.8kPa LP REG CGAS 1/4X3/8 NAREG2A

3KG 2.8kPa LP REG 1/4X3/8 NAREG2B

IN-LINE HIGH PRESSURE REGULATORS

HIGH PRESSURE REGULATORS:

MEGR-6120-30 1/4 HP REG NAREG21BHP

21KG 275kPa HP REG KHOMPRO 1/4X1/4 NAREG21HP

8KG 400kPa HP REG CGAS 1/4X1/4 PG NAREG12AHP

REGULATOR BRACKETS

REGULATOR BRACKETS:

REGULATOR BRACKET ASTRO / KHOMPRO NABR12

REGULATOR BRACKET CGAS NABR4&12

60 61


CSST APPLIANCE CONNECTOR HOSE FITTINGS:

CSST ADAPTER MALE 7/16FL-16UNx1/2BSP NYAA011FL015BSP

CORRUGATED STAINLESS STEEL APPLIANCE CONNECTOR HOSE FITTINGS:

CSST ADAPTER MALE 5/8FL-18UN NYAA016FL016FL

SIGNAGE AND STICKERS:

SIGN EMERGENCY SHUT OFF VALVE NHLPFWESOV

INSTALLATION SIGNAGE AND STICKERS:

CSST ADAPTER MALE 3/4FL-16UNx1/2BSP NYAA020FL015BSP

CSST ADAPTER MALE 3/4FL-16UN NYAA020FL020FL

CSST ADAPTER FEMALE 5/8FL-18UNx8mm HOSE NYAB016FL008M

SIGN LPG WARNING BOARD NHLPFWSB

GAS HOSE:

GAS HOSE 8MM NYLON RE-INF0RCED NHGH001

GAS ORANGE HOSE - SANS 1156-2

CSST APPLIANCE CONNECTOR HOSE:

CSST 1/4 FLEX 7/16F - 18UN x 1000L NX0067/16F1000

CORRUGATED STAINLESS STEEL APPLIANCE CONNECTOR HOSE

CSST 1/4 FLEX 7/16 - 20UN x 1200L NX0067/16FX1200




CSST 5/16 FLEX 3/8M x 3/8M x 500L NX0083/8F500

CSST 8 FLEX M12F x 1/2M x 900L NX008M1/2F900

CSST 3/8 FLEX 5/8F - 18UN x 400L NX0105/8FX400

CSST 3/8 FLEX 5/8F - 18UN x 700L NX0105/8FX700

CSST 1/2 FLEX 3/4F - 16UN x 570L NX0153/4F570

62 63


FIBRE WASHERS:

WASHER FIBRE 1/2 NHFSEAL1/2

FIBRE WASHERS

WASHER FIBRE 3/4 NHFSEAL3/4

NUT & STUD LOCK:

PRATLOK NUT LOCK GR 6-10 NH92051

NUT & STUD LOCK

PRIMARY AIR PLATES 110 X 110 MFPAPSS110X110

PRATLOK STUD LOCK GR 10-20 NH92052

STAINLESS STEEL PRIMARY AIR PLATES

PRIMARY AIR PLATES 250 X 110 MFPAPSS250x110

PRIMARY AIR PLATES 410 X 110 MFPAPSS410x110

PRIMARY AIR PLATES:

STICKER LPG NHLPGSTICKER

VARIOUS ITEMS:

PLUG NAIL 6x40 FOR CLAMP NHGHC01

WALL PLUG NAILS, HOSE CLAMPS, PTFE TAPE, STUD AND THREAD LOCK:

GAS HOSE CLAMPS NHPLG640

PTFE TAPE 12mm x 20M NHPTFE

SIGNAGE AND STICKERS:

64 65

VENTILATION GRILL:

VENT GRILL RETURN 295X195 ALUMINIUM MGVEN295X195A

ANODISED ALUMINIUM VENTILATION GRILLS

LP GAS CYLINDER CAGE 1 X 19kg SS430 DAGC119

LP GAS CYLINDER CAGE 1 X 19kg BLACK DBGC119BL

DOMESTIC GAS CYLINDER CAGES

STAINLESS STEEL CAGES:




BLACK STEEL CAGES:





S/STEEL MALE NIPPLES TBE:

S/STEEL MALE NIPPLES TBE 1/8 NZAANTBE006

S/STEEL MALE NIPPLES TBE:


STAINLESS STEEL BSP THREADED FITTINGS




S/STEEL MALE NIPPLES TBE 1 NZAANTBE025

S/STEEL FEMALE SOCKETS:

S/STEEL FEMALE SOCKETS 1/8 NZABSOCK006

S/STEEL FEMALE SOCKETS:





S/STEEL FEMALE SOCKETS 1 NZABSOCK025


66 67

ITEM CODE:ITEM TYPE: ITEM DESCRIPTION:ITEM TYPE: ITEM DESCRIPTION: ITEM CODE:

S/STEEL FEMALE 90 DEG ELBOWS:

S/STEEL FEMALE 90 DEG ELBOWS 1/8 NZAC90EL006

S/STEEL FEMALE 90 DEG ELBOWS:





S/STEEL FEMALE 90 DEG ELBOWS 1 NZAC90EL025

S/STEEL FEMALE EQUAL TEES:

S/STEEL FEMALE EQUAL TEES 1/8 NZADET006

S/STEEL FEMALE EQUAL TEES:





S/STEEL FEMALE EQUAL TEES 1 NZADET025

S/STEEL MALE SQUARE HEAD PLUGS:

S/STEEL MALE SQUARE HEAD PLUGS 1/8 NZAESQHP006

S/STEEL MALE SQUARE HEAD PLUGS:





S/STEEL MALE SQUARE HEAD PLUGS 1 NZAESQHP025

S/STEEL FEMALE UNIONS:

S/STEEL FEMALE UNIONS 1/8 NZAFUN006

S/STEEL FEMALE UNIONS:





S/STEEL FEMALE UNIONS 1 NZAFUN025

68 69


S/STEEL MALE HOSE NIPPLES:

S/STEEL MALE HOSE TAIL 1/4 NZAHHN008

S/STEEL MALE HOSE NIPPLES:




S/STEEL MALE HOSE TAIL 1 NZAHHN025

S/STEEL REDUCING BUSH:

S/STEEL REDUCING BUSH 1/4x1/8 NZAIRB008x006

S/STEEL REDUCING BUSH:









S/STEEL REDUCING BUSH 1x1/4 NZAIRB025x008





S/STEEL FEMALE 1 PIECE BALL VALVES:

S/STEEL FEMALE 1 PIECE BALL VALVE 1/4 NZAJBV1P008

S/STEEL FEMALE 1 PIECE BALL VALVES:




S/STEEL FEMALE 1 PIECE BALL VALVE 1 NZAJBV1P025



S/STEEL FEMALE 1 PIECE BALL VALVE 2 NZAJBV1P050

52

TelephoneNational: 0861 SYAM SA 0861 7926 72

International: +27 11 845 4395

Email: [email protected]: www.syam.co.za

Gauteng Branch:Northlands Deco Park (Phase 2) Unit D3 , New Market StreetNorthriding, GautengSouth Africa

Western Cape Branch:John Montague Centre19 Montague DriveMontague GardensCape Town, Western CapeSouth Africa

Kwa-Zulu Natal Branch:12 Garlicke DriveDolphin Coast,Ballito Bay, Kwa-Zulu NatalSouth Africa

Date post:	05-Nov-2021
Category:	Documents
Upload:	others
View:	7 times
Download:	0 times

Gas Piping, Tubing, Fittings & Equipment

Documents