GEIndustrial Solutions

Insulated wall mountingcabinetsARIA and PolySafe

ex.geindustrial.com

1

ARIA and PolySafe

ARIA and PolySafe

2-3 Type comparison - introduction

ARIA - Universal polyester cabinets

4 Benefits

8 Order codes

PolySafe - Multipurpose polyester cabinets

10 Benefits

14 Order codes

16 Customisation

18 Aquaria - Waterproof enclosures

21 Range overview

ARIAWhy

choose universal polyester cabinets?

The most effective solution for the continuous and reliable

protection of your electrical and electronic equipment

APPLIC ATIONSSERVICES | Leisure (market squares, campsites, marinas, amusement parks…) | Gas stations, car washes, laundromats, laundry | Construction-site cabinets… | INDUSTRIAL & OEM | Naval construction, mining industries, automotive, paper and pulp |

Food and distilleries | Petrochemicals, heavy industry | Transformation, surveillance system | INFRASTRUCTURE | Water and wastewater treatment sites | Telecommunications, traffic signaling, public transport | Cable television, public lighting, rail transportation |Power distribution (electricity, gas, water), …

• One-piece economical cabinet • High-end modular cabinet with options to extend the height, width and depth

• 7 dimensions, from 300 x 200 x 170 up to 1000 x 800 x 300 (H x W x D) • 14 dimensions, from 500 x 500 x 320 to 1250 x 1000 x 320 (H x W x D)

• IP65/IP66 protection rating • IP54 and IP65 protection rating

• Door opening angle: 180° • Door opening angle: 100°

• 1-, 2-, or 3-point locking system with an interchangeable lock or with a handle for profile half-cylinder locks

• 5-point locking system operated by an ergonomic handle for half-cylinder locks

• Wall and pole mounting • Wall mounting/floor stand/pole mounting

• Version mounted on tubular metal base available • Version for mounting on baseplate or DIN baseplate available (polyester or concrete)

• Certification: UL / CSA / Lloyd’s Register • Certification: UL / CSA / Lloyd’s Register

• Complies with EN/IEC 62208 and EN/IEC 61439-2 • Option of mounting an 19"/ETSI swing frames or an internal IP20 door

• Complies with EN/IEC 62208 and EN/IEC 61439-2

Ambient conditions• Outdoor and indoor use• Withstands extreme weather conditions from -35°C to +70°C (+130°C short time peak)

and maintains its mechanical properties• Appropriate for aggressive, marine, corrosive, and chemical environments• Polyester with a protective layer available as option: customization and additional

protection against UV light

The material passed tests compliant with UL 746 C§26 Ultraviolet Light Exposure. Field trials in temperate climates have proved that these polyester cabinets can withstand outdoor exposure for at least 20 years, without impacting the functional properties. In situations where the external appearance is important, or in regions where there is heavy sun exposure, we suggest applying a protective layer. This will prolong the lifetime by 10 years.

3

Introdcution

PolySafe

Why chooseARIA & PolySafe?• Outdoor and indoor use• IK10 high mechanical strength• Full insulation, maintenance-free• Ready to receive a mounting plate

and modular mounting frame• Tubular metal base for

temporary power connections

Robust and reliable• Completely insulated, total

personal safety: guaranteed protection against direct and indirect contact

inside the cabinet• Homogeneous mechanical and

electrical properties (hot molding - fiber-glass reinforced) - IK10 (solid door)

APPLIC ATIONSSERVICES | Leisure (market squares, campsites, marinas, amusement parks…) | Gas stations, car washes, laundromats, laundry | Construction-site cabinets… | INDUSTRIAL & OEM | Naval construction, mining industries, automotive, paper and pulp |

Food and distilleries | Petrochemicals, heavy industry | Transformation, surveillance system | INFRASTRUCTURE | Water and wastewater treatment sites | Telecommunications, traffic signaling, public transport | Cable television, public lighting, rail transportation |Power distribution (electricity, gas, water), …

• One-piece economical cabinet • High-end modular cabinet with options to extend the height, width and depth

• 7 dimensions, from 300 x 200 x 170 up to 1000 x 800 x 300 (H x W x D) • 14 dimensions, from 500 x 500 x 320 to 1250 x 1000 x 320 (H x W x D)

• IP65/IP66 protection rating • IP54 and IP65 protection rating

• Door opening angle: 180° • Door opening angle: 100°

• 1-, 2-, or 3-point locking system with an interchangeable lock or with a handle for profile half-cylinder locks

• 5-point locking system operated by an ergonomic handle for half-cylinder locks

• Wall and pole mounting • Wall mounting/floor stand/pole mounting

• Version mounted on tubular metal base available • Version for mounting on baseplate or DIN baseplate available (polyester or concrete)

• Certification: UL / CSA / Lloyd’s Register • Certification: UL / CSA / Lloyd’s Register

• Complies with EN/IEC 62208 and EN/IEC 61439-2 • Option of mounting an 19"/ETSI swing frames or an internal IP20 door

• Complies with EN/IEC 62208 and EN/IEC 61439-2

Appropriate for chemical and aggressive environments• Resistant to corrosion• Resistant to acids, alkalis, salts, ketones, oils,

grease, and fuels

Waterproofing and dust-tightness• IP6x: complete protection against contact with live parts

and ingress of dust• IPx5: complete protection against water jets from any

direction (360°)• IPx6: complete protection against water projected in

powerful jets similar to those on a ship deck

4

ARIAIn

sula

ted

wal

l mou

ntin

g ca

bine

ts

Features

- The range is available in seven sizes, ranging from 315 x 215 to 1035 x 835 mm.

- The cabinets are made of light-grey (RAL 7035) hot moulded, glass fibre reinforced polyester, dyed in mass. The enclosure is furnished with four threaded studs and bolts for mounting plate or mounting frame installation.

- The enclosure provides total insulation and a protection degree of IP65/66 following EN/IEC 60529.

- Protection degree IK10 against external mechanical impacts according to EN/IEC 62262 (IK07 for cabinets with glazed door).

- Resists temperatures up to 70°C in continuous use (peak temperatures up to 130°C).

- Self extinguishing and halogen-free.- Rated insulation voltage Ui = 1000V.

Applications

- Heavy industry - Brewery- Steel mills - Public services- Petrochemical plants - Street signalisation- Temporary connection (for construction sites) - Telecom - Photovoltaic energy

Universal polyester cabinets

Standards

EN/IEC 61439-2EN/IEC 60529EN/IEC 62208

Approvals

UL types 3, 3R, 3S, 4, 4X, 12 and 13 Available on request

CSA types 3, 3R, 3S, 4, 4X, 12 and 13 Available on request

Lloyd's Register of Shipping

5

ARIA U

niversal cabinets

Independent rail for terminal blocksMounting frame- removable- predrilled- reinforced DIN-railsIntegrated hinges.Door opens 180°Mounting plate- metal- pertinax- perforatedDirect wall fixing points or wall fixing lugs in plastic material or stainless steel.

Housing in one pieceRemovable door: left- or right-hand hinged (not for version with swing-handle)Slightly curved gasket-slot avoiding water stagnationFixing points at rear of doorCover plate:- polyester RAL 7035- hinged- independent- reversible (30 mm different build-in depth)- sealable- with 90° locking pinThree point closing system with one lock.Exchangeable locks.

1

2

3

4

5

6

7

8

9

10

11

1

2

3 4

5

6

7

8

9

10

11

6

ARIAIn

sula

ted

wal

l mou

ntin

g ca

bine

ts

Monobloc type of cabinet

In and outdoor use

7 dimensions 315 x 215 x 170 up to

1035 x 835 x 300 mm

1, 2 or 3 point locking mechanism

Glass fibre reinforced polyester

Protection degree IP65/66-IK10 (plain door)

Fitted for mounting plate and modular

mounting frame

Wall mounting/pole fixing

Approvals: UL/CSA/Lloyd’s Register

Self-adhesive rainhood (as a standard accessory with each cabinet)

avoiding dripping water drops while opening

the door

Mounting frame with individual modular cover plates for DIN-rail equipment150 mm between centres, up to 180 modules

closed cover plates for mounting plate assembly.

Construction Petrochemicals Conveyer belts

7

ARIA U

niversal cabinets

Conveyer belts

Durable polyurethane gasket

Ergonomic closing mechanism • Various lock inserts and handles available

• Can also be operated by swing-handle for

profile half cylinder

Traffic Water treatment Camping and Hotels

Patented doorlifter for bigger dimensions (ARIA 75 and larger) ensuring the door takes it’s center position during closing

8

ARIAIn

sula

ted

wal

l mou

ntin

g ca

bine

ts

Multipurpose polyester cabinets

ARIA 32 ARIA 43 ARIA 54 ARIA 64 ARIA 75 ARIA 86 ARIA 108

Dimensions H x W x D 315 x 215 x 170 415 x 315 x 170 515 x 415 x 230 615 x 415 x 230 735 x 535 x 270 835 x 635 x 300 1035 x 835 x 300

Cabinet IP65 - IK10With double bit lock 3 mm - - 831809 831810 831811 - -

2-point 2-point 2-pointGlazed door cabinet IP65 - IK07 With double bit lock 3 mm - - 831812 831813 831814 - -

2-point 2-point 2-point

Cabinet IP66 - IK10 831025(1) 831036 831052 831065 831081 831098 831112With central double bit lock 3 mm

Glazed door cabinet IP66 - IK07 - 831815 831129 831130 831131 831132 831133With central double bit lock 3 mm

Cabinet IP66 - IK10 - 831034 831051 831064 831080 831097 831111With central swing handle for profile half cylinder

Glazed door cabinet IP66 - IK07 - - 831284 831285 831286 831287 831288With central swing handle for profile half cylinder

Mounting platesDimensions H x W 250 x 150 350 x 250 450 x 350 550 x 350 650 x 450 750 x 550 950 x 750

Pertinax 5 mm 831027 831038 831054 831067 831083 831100 831114Sendzimir zinc coated sheet steel 2 mm 831026 831037 831053 831066 831082 831099 831113 Metal perforated 1.5 mm 831332 831333 831334 831335 831336 831337 831338

Mounting frame 831030 831041 831057 831070 831086 831103 831117Banks 2 2 3 3 4 4 5Modules 12 24 54 54 88 96 180

Rail for terminal blocks 831018 831019 831020 831020 831021 831022 831023Available spaces for terminal 2 3 4 4 6 7 10

Full cover platesPlain 831028 831039 831055 831068 831084 831101 831115With cut-outs for DIN-rail equipment 831029 831040 831056 831069 831085 831102 831116With cut-out for individual modular cover plates - 831790 831791 831792 831793 831794 831795Number of ind. mod. cover plates containable - 2 3 3 4 8 10

Note: The cabinets ARIA 43 and 86 as well as ARIA 64 and 108 contain the same individual modular cover plates (plain and with cut-out).

Dimensions H x W - 150 x 239 150 x 343 150 x 343 150 x 239 150 x 239 150 x 343Individual modular cover plates IP20 (PVC)Plain - 831797 831799 831801 831803 831797 831801With cut-outs for DIN-rail equipment - 831796 831798 831800 831802 831796 831800Modules - 12 17 18 22 12 18

(1) 1 point locking mechanism, no closing rodPack: 1

9

ARIA U

niversal cabinets

Multipurpose polyester cabinets

ARIA 32 ARIA 43 ARIA 54 ARIA 64 ARIA 75 ARIA 86 ARIA 108

Dimensions H x W x D 315 x 215 x 170 415 x 315 x 170 515 x 415 x 230 615 x 415 x 230 735 x 535 x 270 835 x 635 x 300 1035 x 835 x 300

Cabinet IP65 - IK10With double bit lock 3 mm - - 831809 831810 831811 - -

2-point 2-point 2-pointGlazed door cabinet IP65 - IK07 With double bit lock 3 mm - - 831812 831813 831814 - -

2-point 2-point 2-point

Cabinet IP66 - IK10 831025(1) 831036 831052 831065 831081 831098 831112With central double bit lock 3 mm

Glazed door cabinet IP66 - IK07 - 831815 831129 831130 831131 831132 831133With central double bit lock 3 mm

Cabinet IP66 - IK10 - 831034 831051 831064 831080 831097 831111With central swing handle for profile half cylinder

Glazed door cabinet IP66 - IK07 - - 831284 831285 831286 831287 831288With central swing handle for profile half cylinder

Mounting platesDimensions H x W 250 x 150 350 x 250 450 x 350 550 x 350 650 x 450 750 x 550 950 x 750

Pertinax 5 mm 831027 831038 831054 831067 831083 831100 831114Sendzimir zinc coated sheet steel 2 mm 831026 831037 831053 831066 831082 831099 831113 Metal perforated 1.5 mm 831332 831333 831334 831335 831336 831337 831338

Mounting frame 831030 831041 831057 831070 831086 831103 831117Banks 2 2 3 3 4 4 5Modules 12 24 54 54 88 96 180

Rail for terminal blocks 831018 831019 831020 831020 831021 831022 831023Available spaces for terminal 2 3 4 4 6 7 10

Full cover platesPlain 831028 831039 831055 831068 831084 831101 831115With cut-outs for DIN-rail equipment 831029 831040 831056 831069 831085 831102 831116With cut-out for individual modular cover plates - 831790 831791 831792 831793 831794 831795Number of ind. mod. cover plates containable - 2 3 3 4 8 10

Note: The cabinets ARIA 43 and 86 as well as ARIA 64 and 108 contain the same individual modular cover plates (plain and with cut-out).

Dimensions H x W - 150 x 239 150 x 343 150 x 343 150 x 239 150 x 239 150 x 343Individual modular cover plates IP20 (PVC)Plain - 831797 831799 831801 831803 831797 831801With cut-outs for DIN-rail equipment - 831796 831798 831800 831802 831796 831800Modules - 12 17 18 22 12 18

(1) 1 point locking mechanism, no closing rodPack: 1

10

Insu

late

d w

all m

ount

ing

cabi

nets

PolySafe

Features

- 14 standard dimensions (from 500 x 500 up to 1250 x 1000) in one depth 320 mm- Cabinets are standard factory assembled (empty or equipped)- High protection degree IP65 & IP54-IK10 (20 J) according to IEC 60529 and

EN/IEC 62262 (IP54 - IK07 for cabinets with glazed door)- Material: self-extinguishing, hot moulded, halogen-free, fiberglass reinforced polyester (environment friendly)- Colour: grey RAL7035, dyed in mass - Designed for wall mounting, floor standing and pole fixing- Coupling possibilities in height, width and depth- Total insulation- Door with 5-point latching mechanism- Execution as pedestal possible- Rated insulation voltage Ui = 1000V- Easy recyclable: no moulded-in metal parts

Multipurpose polyester cabinets

Standards

EN/IEC 60529EN/IEC 62208EN/IEC 62262

Approvals

- Cabinets with one door: type 3, 3R, 3S, 4, 4X, 12, 12K and 13

- Cabinets with two doors: type 3, 3R, 3S, 4, 4X, 12, 12K and 13

- Coupled cabinets: type 3, 3R, 3S, 12, 12K and 13 Available on request

Lloyd's Register of Shipping

Ambient conditions

Indoor and outdoor stationary use, at temperatures between -35°C and 70°C in continuous use and at peak temperatures up to +130°C

11

Multipurpose cabinets

PolySafe

Applications

• Commercial Leisure (market places, camping sites, harbours for pleasure crafts, amusement parks), fuel stations, car washes, launderettes and laundries, service enclosures for construction yards, …

• Industrial Shipyards, mining, automotive, paper and pulp, food and beverage,

petro-chemicals, heavy industry, transformers, system monitoring, …

• Utilities Water treatment plants, waste management, telecommunications, traffic signaling systems, traffic management, public transport, energy distribution (electricity, gas, water), cable television (CATV), public lighting, railways, …

12

Insu

late

d w

all m

ount

ing

cabi

nets

Rainhood for outdoor use- Up to IP65, optional- Possibility of ventilation through

cut-outs in top panel and air vents on side panels

(to prevent internal condensation)

- Protection degree: IP44/IP54 in case of ventilation

- Moulded-in markings on the inside top panel shows

the cut-out and fixation points

Neoprene gasket- Preformed and

premounted

Side panels- Integrated into top

and bottom- Provide a very

solid and stable construction

Backpanel- Enclosed in main structure - Has a seamless top panel as a result- No inserts - PUR sealing directly injected (IP54)

or glued EPDM-gasket (IP65)

Mounting plates- Metal 2 mm - Pertinax 5 and 10 mm - Metal perforated 2 mm - Fixed (by means of HiLo)

as well as adjustable in depth for all sizes

Wall mounting brackets- No mounting screws

necessary - Can be mounted

vertical or horizontal

Mounting frame- In Alu with standard

horizontal Alu C-profiles for all four widths

- Regulation in depth possible for all sizes

- Offering a complete solution (no more sawing necessary)

Floor mounting frameBase in polyester(height 65 mm) - For anchoring the

cabinet with the floor - Moulded-in markings

on the inside bottom panel shows the cut-out and fixation points for anchoring

PolySafe

13

Multipurpose cabinets

Door - Flush mounted - Plain or glazed - No inserts (HiLo screws) - Inclosed in main structure- Has a seamless top panel

as a result- Injected PUR sealing (IP54) or glued EPDM sealing (IP65)- Opening angle 100°

Hinges - Mounted directly on the side

panels, each step of 250 mm - Direct access outside the

functional part of the cabinet

Standard 5 point latching mechanism- Operated by one handle - Provides secure closing (IP65)

Self tapping HiLo screws(no inserts) - For assembling main

structure and fixation of the back panel

- Makes the cabinet easily dismantled for recycling

DoorstopPrevents stressing the door hinges caused by wind in outside use.For enclosure width 750 mm and larger.

Standard ergonomic operating handle- Premounted on the door- Suitable for all types of

profile half cylinder locks (standard depth 40 mm/ alt. depth 45 mm)

- Padlock (optional)- Dual-Profile-half-cylinder

handle (optional, utility + owner)

Door conductingFor exact door positioning in the main structure

Doorlifter- For bigger dimensions

(from PS330)- Ensuring the door takes

its center position during closing

PolySafe

14

Insu

late

d w

all m

ount

ing

cabi

nets

Multipurpose polyester cabinets

Depth = 320 mm PS 220 PS 230 PS 320 PS 330 PS 340 PS 352 PS 420 PS 430 PS 440 PS 442 PS 452 PS 530 PS 542(1) PS 546

Factory-assembled cabinetComplete with handle and wall mounting bracketsof AISI 304 stainless steel (without cylinder lock)Dimensions (H x W) 500 x 500 500 x 750 750 x 500 750 x 750 750 x 1000 750 x 1250 1000 x 500 1000 x 750 1000 x 1000 1000 x 1000 1000 x 1250 1250 x 750 1250 x 1000 1250 x 1000IP54 Cabinet with plain door 833745 833746 833747 833748 833749 833754 833750 833751 833752 833755 833756 833753 833757 833758IP65 Cabinet with plain door 833000 833004 833008 833012 833016 833020 833024 833028 833032 833036 833040 833044 833052 833056IP54 Cabinet with glazed door (polycarbonate window) 833850 833851 833852 833853 833854 833855 833856 833857 - 833858 833859 833860 833861 833862Weight (kg) 16 19 20 25 30 38 25 30 36 39 41 37 45 45

Cabinet with door on the front and at the back IP54 833863 833864 833865 833866 833867 833868 833869 833870 833871 833872 833873 833874 833875 833876Cabinet with door on the front and at the back IP65 833076 833086 833219 833373 833077 833374 833375 833085 833376 833377 833378 833379 833380 833381

IP54 Depth extension kit 833877 833878 833879 833880 833881 833882 833883 833884 833885 833885 833886 833887 833888 833888IP65 Depth extension kit 833584 833585 833586 833587 833588 833589 833590 833591 833592 833592 833593 833594 833595 833595

To increase the standard depth 320 mm of thecabinet up to 640 mm. The kit consists out of twoside panels, one top and bottom panel and twoopen backpanels.

Rainhood 833566 833568 833566 833568 833570 833572 833566 833568 833570 833570 833572 833568 833570 833570

For an efficient ventilation (IP44) in outdoor useby drilling holes in the top panel.As the standard enclosure is IP65, a rainhood is not necessary. In case of extra width or depth,see Enclosures catalogue.

Plinth or floor mounting frame. 833574 833575 833574 833575 833576 833577 833574 833575 833576 833576 833577 833575 833576 833576Cabinet and plinth are anchored togetherin the flooring - H = 65 mm

Adaptor frame for DIN-base mounting - 833582 - 833582 833583 - - 833582 833583 833583 - 833582 833583 833583Cabinet and adaptor frame are anchored on theDIN base (polyester)

DIN-base - 843392 - 843392 843393 - - 843392 843393 843393 - 843392 843393 843393

Concrete base 833670 833671 833670 833671 833672 833673 833670 833671 833672 833672 833673 833671 833672 833672Cabinet anchored on the base

Mounting plateDimensions (H - 110 mm x W - 110 mm)

Sendzimir zinc coated sheet steel 2 mm 833500 833501 833501 833502 833504 833506 833503 833504 833505 833505 833507 833506 833507 833507Perforated 2 mm 833516 833517 833518 833519 833520 833521 833522 833523 833524 833524 833525 833526 833527 833527Pertinax 5 mm 833508 833509 833509 833510 833512 833514 833511 833512 833513 833513 833515 833514 833515 833515Pertinax 10 mm - - - - - - 833385 - 833386 833386 833387 - - -

Mounting frame in AluConsisting out of: four attachment brackets,two vertical C-profiles. Horizontal profiles

to be ordered separately, see B.19Continuously adjustable 833533 833533 833534 833534 833534 833534 833535 833535 833535 833535 833535 833536 833536 833536Adjustable in steps of 12,5 mm 833529 833529 833530 833530 833530 833530 833531 833531 833531 833531 833531 833532 833532 833532

Length of horizontal profile (mm) 468 718 468 718 968 1218 468 718 968 968 1218 718 968 968

PolySafe

15

Multipurpose cabinets

Multipurpose polyester cabinets

Depth = 320 mm PS 220 PS 230 PS 320 PS 330 PS 340 PS 352 PS 420 PS 430 PS 440 PS 442 PS 452 PS 530 PS 542(1) PS 546

Factory-assembled cabinetComplete with handle and wall mounting bracketsof AISI 304 stainless steel (without cylinder lock)Dimensions (H x W) 500 x 500 500 x 750 750 x 500 750 x 750 750 x 1000 750 x 1250 1000 x 500 1000 x 750 1000 x 1000 1000 x 1000 1000 x 1250 1250 x 750 1250 x 1000 1250 x 1000IP54 Cabinet with plain door 833745 833746 833747 833748 833749 833754 833750 833751 833752 833755 833756 833753 833757 833758IP65 Cabinet with plain door 833000 833004 833008 833012 833016 833020 833024 833028 833032 833036 833040 833044 833052 833056IP54 Cabinet with glazed door (polycarbonate window) 833850 833851 833852 833853 833854 833855 833856 833857 - 833858 833859 833860 833861 833862Weight (kg) 16 19 20 25 30 38 25 30 36 39 41 37 45 45

Cabinet with door on the front and at the back IP54 833863 833864 833865 833866 833867 833868 833869 833870 833871 833872 833873 833874 833875 833876Cabinet with door on the front and at the back IP65 833076 833086 833219 833373 833077 833374 833375 833085 833376 833377 833378 833379 833380 833381

IP54 Depth extension kit 833877 833878 833879 833880 833881 833882 833883 833884 833885 833885 833886 833887 833888 833888IP65 Depth extension kit 833584 833585 833586 833587 833588 833589 833590 833591 833592 833592 833593 833594 833595 833595

To increase the standard depth 320 mm of thecabinet up to 640 mm. The kit consists out of twoside panels, one top and bottom panel and twoopen backpanels.

Rainhood 833566 833568 833566 833568 833570 833572 833566 833568 833570 833570 833572 833568 833570 833570

For an efficient ventilation (IP44) in outdoor useby drilling holes in the top panel.As the standard enclosure is IP65, a rainhood is not necessary. In case of extra width or depth,see Enclosures catalogue.

Plinth or floor mounting frame. 833574 833575 833574 833575 833576 833577 833574 833575 833576 833576 833577 833575 833576 833576Cabinet and plinth are anchored togetherin the flooring - H = 65 mm

Adaptor frame for DIN-base mounting - 833582 - 833582 833583 - - 833582 833583 833583 - 833582 833583 833583Cabinet and adaptor frame are anchored on theDIN base (polyester)

DIN-base - 843392 - 843392 843393 - - 843392 843393 843393 - 843392 843393 843393

Concrete base 833670 833671 833670 833671 833672 833673 833670 833671 833672 833672 833673 833671 833672 833672Cabinet anchored on the base

Mounting plateDimensions (H - 110 mm x W - 110 mm)

Sendzimir zinc coated sheet steel 2 mm 833500 833501 833501 833502 833504 833506 833503 833504 833505 833505 833507 833506 833507 833507Perforated 2 mm 833516 833517 833518 833519 833520 833521 833522 833523 833524 833524 833525 833526 833527 833527Pertinax 5 mm 833508 833509 833509 833510 833512 833514 833511 833512 833513 833513 833515 833514 833515 833515Pertinax 10 mm - - - - - - 833385 - 833386 833386 833387 - - -

Mounting frame in AluConsisting out of: four attachment brackets,two vertical C-profiles. Horizontal profiles

to be ordered separately, see B.19Continuously adjustable 833533 833533 833534 833534 833534 833534 833535 833535 833535 833535 833535 833536 833536 833536Adjustable in steps of 12,5 mm 833529 833529 833530 833530 833530 833530 833531 833531 833531 833531 833531 833532 833532 833532

Length of horizontal profile (mm) 468 718 468 718 968 1218 468 718 968 968 1218 718 968 968

(1) PS540 IP54 one door 1250 x 1000 mm: 833889

PolySafe

16

Insu

late

d w

all m

ount

ing

cabi

nets

Customisation

Lay-out in compartments and internal separations as a flexible solution for the end customer (e.g. separation of distribution and control/measurement sections).

Cabinet also available with inset poly carbonate window (IP54): visability of operating components, internal signalisation.

Cabinet can be factory equipped and wired according to the customers requirements: ready to install and operate.

Cabinet can be ordered with preformed cut-outs to suit your application: ease and speed of mounting.

Coupling in depth by means of a depth extension kit (nearly unlimited).

Coupling in height and width by means of a coupling kit (see accessories): ease of extension.

PolySafe

17

Customisation

Customisation

Cabinet also available in kit-form on demand: ease of transportation, space saving storage.

Cabinet can be provided with door on the front and at the rear: easy access, two different individual compartments.

Cabinet can be supplied painted in other colours or with personal identification: environmental influence adaptation, ease of recognition, anti-graffiti.

Mounting applications

Rainhoods

Four fixing points for securing rainhood are marked off in top panel. By drilling holes in the top panel and by fitting air vents (Ref. No. 833677) on the side panels, the cabinet with rainhood will be efficiently ventilated. (IP44)For extra depth or extra width, please contact us. Special wall-mounting bracket needed (833624) to guarantee sufficient distance to the wall.

Plinth Easily mounted in accordance with the enclosed instructions

PolySafe

18

Insu

late

d w

all m

ount

ing

cabi

nets

Aquaria

Features

• Total insulation • Protection degree IP65 - IK08• Colour: RAL 7035• Transparent lid or hinged door (3 rows)• For DIN-rail equipment up to 92.5 mm• DIN-rails adjustable up to 3 different levels• Operating temperature: -5°C to +60°C• Flame resistance: resist the 650°C• Non UV stable• Enclosures can not be coupled

Waterproof enclosures Surface mounting

Aquaria IP65

Power dissipation

Enclosure # mod. Ref. No. Maximal power dissipation (W)1 row 5 597956 8

1 row 8 597957 11

1 row 12 597958 17

1 row 12 597959 20

2 rows 24 597960 30

3 rows 48 597961 45

Standards EN/IEC 60670-1; EN/IEC 60670-24

Applications

Aquaria is the best choice for power distribution purposes in premises with a need for high protection degree eg. power plants, technical areas small laboratories, etc..

Approval / Marking

19

Waterproof enclosures

Aquaria

Aquaria - Waterproof enclosures surface mounting IP65Colour Dimensions Modules # Art. No. ENCLOSURE EARTH BAR

mm (H x L x W) 17,5 mm rows Ref. No. Pack Ref. No. Pack

Grey RAL 7035 120 x 160 x 90 3/5 1 AQA005PG 597956 1/40/840 597962 1/20/120

Grey RAL 7035 200 x 160 x 90 4/8 1 AQA008PG 597957 1/26/546 597963 1/20/120

Grey RAL 7035 225 x 200 x 110 6/12 1 AQA012PG 597958 1/14/294 619320 1/20/120

Grey RAL 7035 250 x 250 x 145 6/12 1 AQA912PG 597959 1/1/152 619320 1/20/120

Grey RAL 7035 375 x 250 x 145 24 2 AQA024PG 597960 1/1/108 619320 1/20/120

Grey RAL 7035 550 x 350 x 145 48 3 AQA048PG 597961 1/1/44 619321 1/10/60

Accessories - Earth terminals(1)

Connection # earth bars Ref. No. Pack

2 x 16 mm2 + 5 x 10 mm2 1 597962 1/20/1202 x 16 mm2 + 8 x 10 mm2 2 597963 1/20/120

2 x 16 mm2 + 12 x 10 mm2 2 619320 1/20/1202 x 16 mm2 + 12 x 10 mm2 4 619321 1/10/60

(1) To be ordered separately

ARIAMultipurpose polyester cabinets

IP66 - IK10 UL - CSA - ASSeven sizes, from 315 x 215 x 170mm up to 1035 x 835 x 300 mm. In self extinguishing and halogen-freepolyester. Maintenance-free andcorrosion-resistant.

PolySafe

Multipurpose polyester cabinets IP65/IP54 - IK10 - UL - CSA

14 standard dimensions, from 500 x 500 mm up to 1250 x 1000 mm.One depth: 320 mm.Cabinets are standard factory assembled (empty or equipped).

APO

Modular polyester boxes IP67 - IK10

UL - CSA - GL - Lloyd'sNine basic enclosures from 185 x 150 x 140 mm up to 600 x 600 x 175 mm. Greater depth is obtained by depth extension frames.

MultiBox

Small multipurpose boxes IP66 - IK07/08 - cUL

11 basic sizes, from 65 x 65 mm up to 361 x 254 mm.With 5 cover depths.Made of polystyrene or glass-fibrereinforced polycarbonate.

EH Wide range from DIN00 - DIN3 and pillar type versionsCabinets for underground cabledistribution. More than 30 enclosures, in various configurations: DIN and non-DIN size, with double compartments, with increased depth, with front and rear doors. Providing solutions to various applications.

UC-CabinetUnderground connection cabinet5 standard configurations. 32A up to 125A outgoing ratings.The diving bell principle prevents all flood damage.

AquariaWaterproof enclosures Surface mountingAquaria is the best choice for power distribution purposes in premises with a need for high protection degree eg. power plants, technical areas small laboratories, etc..

This productfeatured in this

publication

This productfeatured in this

publication

All productsfeatured in this

publication

This productfeatured in this

publication

ex.geindustrial.com

GEIndustrial Solutions

1182

27

GE Industrial Solutions is a first class global supplier of low and medium voltage products including wiring devices, residential and industrial electrical distribution components, automation products, enclosures and switchboards. Demand for the company’s products comes from wholesalers, installers, panelboard builders, contractors, OEMs and utilities worldwide.

680861Ref. E/5486/E/EX 0.1 Ed. 06/16

* Trademark of General Electric Company © Copyright GE Industrial Solutions 2016

BelgiumGE Industrial BelgiumNieuwevaart 51B-9000 GentTel. +32 (0)9 265 21 11

FinlandGE Industrial SolutionsKuortaneenkatu 2FI-00510 HelsinkiTel. +358 (0)10 394 3760

FranceGE Industrial Solutions204, Rue du Rond-Point du Pont de SèvresF-92100 Boulogne-BillancourtTel. +33 (0)800 912 816

GermanyGE Industrial SolutionsRobert-Bosch Str. 3D-50354 Hürth-EfferenTel. +49 (0) 2233/ 9719-0

HungaryGE Hungary Kft .Vaci ut 81-83.H-1139 BudapestTel. +36 1 447 6050

ItalyGE Industrial SolutionsCentro Direzionale ColleoniVia Paracelso 16Palazzo Andromeda B1I-20864 Agrate Brianza (MB)Tel. +39 039 637 371

NetherlandsGE Industrial SolutionsParallelweg 10Nl-7482 CA HaaksbergenTel. +31 (0)53 573 03 03

PolandGE Power ControlsUl. Towarowa 25A, Ip00-869 WarszawaTel. +48 22 520 53 53

Ul. Leszczyńska 643-300 Bielsko-Biała Tel. +48 33 828 62 33

RussiaGE Industrial Solutions27/8, Electrozavodskaya streetMoscow, 107023Tel. +7 495 937 11 11

South AfricaGE Industrial SolutionsUnit 4, 130 Gazelle AvenueCorporate Park Midrand 1685P.O. Box 76672 Wendywood 2144 Tel. +27 11 238 3000

SpainGE POWER CONTROLS IBÉRICA, S.L.Calle Miño 122 Naves E-FPolígono Industrial Santa Margarita08223 Terrassa (Barcelona)Tel. +34 900 993 625

United Arab EmiratesGE Industrial SolutionsInjaz Building, 3rd FloorDubai Internet CityPO Box 11549, DubaiTel. +971 4 4546912

United KingdomGE Industrial Solutions2 The Arena, Downshire WayBracknell, BerkshireRG12 1PUTel. +44 (0)800 587 1239