specialized in target shooting

www.gehmann.com

GehmannThe company background...

In the 1930s a young Walter Gehmann started being noticed on the range. He was a pain to fellow competitors in small-bore and full-bore rifle, winning competitions to national level. Seeking further improvements in his scores he sought to develop shooting equipment of his day. As early as 1936 he designed his first precision rearsight assembly. The following year he developed the first pair of dedicated shooting glasses with a moveable lens holder. In 1939 he came up with Germany´s first target-shooting jacket, a shooting sling, boots and a specialised glove.

1949 gave birth to the company name. Although the first 40 years were steered by its founder Walter, son Markus came to the firm and then assisted his father for some 10 years - before taking over.

Returning to Walter Gehmann´s career: it was to see him achieve a world champion-ship, followed by his first rearsight iris in 1953 - with which he won no less than seven German championships. In 1956 came his first foresight iris. Two years

later he produced his first colour filter unit for a rearsight. A little-known fact about Gehmann's founder was his talent for aiding design and development of the other well-known manufacturers in their pioneering days.

Patenting the Mauser 66 action, designing the Anschutz Match 54 action and assisting design and production of the Feinwerkbau 65, 150, 300 and their small-bore rifle were just a few... he also carried out development work for Walther. Herr Gehmann Snr. now has more than one hundred patents to his credit and can still be found behind his desk. Some of his best ideas never got to us, unfortunately. Two examples being an electronically controlled iris that automatically adjusted to ambient light and a twin eyesight combined prism enabling the rifle shooter to use both eyes for sighting. An inquiring mind forever explores avenues of possibility though not all will reach maturity. More recently Gehmann witnessed the introduction of what is now the world’s leading pre-charged match air weapon -and chosen as Morini´s major distributor.

The 162.E pistol, a revolution in its day, sent rivals scampering for similar ideas, though no-one has yet manufactured an equivalent. This got complimented by the handpump at the same time as development of the first lockable rearsight. Installation of works programmes for continued improvement of irises, sights, clothing, control equipment and their future adaptability, service warranty and customer cost were put in place at the turn of the century. The future looks bright.

In conclusion, Gehmann is recognised world-wide as the premier target shooting equipment manufacturer - producing the very best at prices we can afford - with a service life second to none...GRAHAM MANLEY (UK)

1937 ... the first frames 1940’s ... the first jacketand the birth of the company

1953 ... the legendary iris 1956 ... the first front iris 1997 - 2010 ... iris patent

Milestones in our development ...

... 1937: Walter Gehmann invents the first shooter’s frames with a swivelling lens holder.

.. in the 40’s Walter Gehmann continued developing equipment we now all assume to be common-place on the range. One of these products was a dedicated targetshooting jacket with the now familiar non-slip shoulder pad. The family businessname was born and became the company we know today.

... 1953 saw development and manufacture of their first rear-sight iris. This iris and other versions that were patented later gave rise to Gehmann’s unique ability today of giving a 30-year guarantee on any one of their rearsight irises - that’s progress!

... 1956 led to the first foresight iris - from then on the product range just grew and grew. There is now just about every item we see on the range - from the shooter to the competiton controller, the weapons and clothing, the targets and the smiles!

... 1997 saw the registration of our latest iris patent followingnon-stop development in design, engineering and materials.We made, what was for us, one of our biggest decisions which was to exceed any othermanufacturer's standards by leading the field.

Walter Gehmannfounder

Walter Gehmann with his son - getting to know how to do it !

inventive

intuitive

innovative

60 years

page 2

history

sighting eQuipment

rearsight irises 4 - 16

rearsight eyeshields 17

rearsights 18 - 21

special rearsight fittings 22

anti-glare tubes 23 - 24

foresights 24 - 25

foresight irises 25 - 30

spirit levels 31

lenses etc. 32 - 33

sighting equipment + archery iris 34 - 35

shooting Frames

Gehmann 36 - 37

Knobloch 38 - 39

Varga 39

clip-on iris etc. 40

headband Frames +

caps etc. 41 - 43

clothing

jackets + trousers 44 - 54

belt, braces, buttons etc. 55

underwear 56

ear protection 56

gloves 57 - 59

boots

boots + kneeling rolls 60 - 61

slings 62 - 64

gehmann pistol 65

morini

pistols + accessories 66 - 70

match-guns

pistols + accessories 71 - 73

pistols + riFles

Röhm 70

Steyr 74 - 75

Feinwerkbau 76 - 77

Walther 78 - 79

Anschütz 80

Edge + Hämmerli 81

FX-Airguns 82 - 87

Weihrauch 88

Diana 89

hometrainer 89

recharging eQuipment

refill air bottles and 200-bar pumps 90

compressors 91

customising 92 - 96

spotting `scopes + stands

special disciplines 97 + 99

`scopes + stands 98 - 101

eQuipment

pellets and holders, etc. 102 - 103

ballistic test eQuipment 104 - 108

carry cases + riFle slips 109 - 113

target changers 114 - 117

gehmann teamwear 118

reFerences 119

page 3

index

gagan narang (india)

world cup winner (multiple) and world record holder

applies gehmann sights

510-s iris

• as 510 above, but with black and silver finish

510 iris

• much shorter and adjustable over a wider range of 0.5 - 3.0mm• the fixed-seat iris works with individually pin-located tempered spring steel leaves• the aim-point is precisely maintained through the wider range of adjustment by the

introduction of a new system of aperture control operated by varying the pressure of a steel tube against the central aiming ring - this guarantees a perfect circle at any point within the scale

• light reflection is kept to a minimum by external and internal matt finishes• Gehmann patented so not available in other manufacturers` irises• laser engraved indications

YEA

RS GUARANTEE

Our system of rearsight irises is entirely based upon our patented fixed-seat iris design constructed with tempered stainless steelleaves attached to the iris body. All our irises are built upon this superior principle and all additional features connected to and within our iris combinations benefit from it. As a result of our patent the peep hole seen by the shooter is absolutely circular throughout the

full range of adjustments. Additionally our irises can be cleaned with pressure air without risk of damage. All internal and, where used, external black surfaces are manufactured to give absolutely minimal light reflection - another cause of sight picture loss.

All our irises are laser engraved and are with

a 30-year no-Quibble guarantee

The reason the iris is so important to the shooter is it enables the shooter to achieve an extended depth of optical field - necessary to clearly see both the foresight and the target picture at the same time.

Our design no longer utilises the old iris favoured by all other manufacturers. The old design, if accidently dropped or badly mishandled, may move within the iris body and be repositioned

without the shooters` knowledge - impossible with our patent.

sights

we are an innovative manuFacturer and supplier

but also support historically proven designs

this came about by listening to customer opinion

and producing products which meet their needs

sights

page 4

501mc iris with push-Fit coloured rings

• iris 0.5 - 3.0mm• engraved with its individual serial number• 5 external push-fit rubber rings which attach to the knurled ring in: red, yellow, green,

blue and black• designed to provide an illusory optical effect which ensures perfect eye alignment• an extremely simple and inexpensive idea that gives exceptional improvement

550 polarisation Filter

• iris• two polarisation filters:

- first ring eliminates reflections and controls white round target - second ring (with stainless lugs) controls light through the sight and

enables varying degrees of brightness • 10 - 90 % light absorption via the twin polarisers • can be used as an iris only - or with one, or both, polarisers• easy clean instructions are included

563 iris, 6-colour and single polariser

• iris• 6 colour filters: yellow, orange, green, brown, light and dark grey • single polariser• can be used as an iris only• easy clean instructions included • finished in black and silver

564 iris, 48-colour and single polariser

• iris• 12 colour filters:

1. wheel: yellow, dark green, orange, brown, light and dark grey2. wheel: light and dark blue, lemon yellow, red, light green and lilac

colours from one ring can be mixed with the other - to provide the remaining 36 colour options• single polariser• can be used as an iris only• easy clean instructions included• finished in black and silver

YEA

RS GUARANTEE

about our products polarisation Filters

Deviating light rays originating from the bull or surrounding white, caused by high intensity light, result in a poor or deteriorating sight picture.Due to the properties of polarised filters and the fact that quartz grains lay on the filter in one direction it is possible with a single filter to absorb the reflected beams. By introducing and overlaying a second filter at varying angles to the first filter the incoming light intensity can be reduced up to 90% of its original value. Thus by using one or two filters (or none at all if this appropriate) one bit of sighting equipment allows you control of one of the most critical causes of all sighting problems.

sights

page 5

thomas Farnik (austria)

world champion winner world cup final

winner world cup european champion and world shooter of the

year

566 6-colour

• incorporates the patented 510 iris• filters are of the highest quality optically flat glass in colours:

yellow, green, brown, light grey, dark grey and orange• can be used as iris only• easy clean instructions included

567 6-colour

• as 566 but silver and blue

566-s 6-colour

• as 566 but silver and black

566-r 6-colour

• as 566 but red and black

YEA

RS GUARANTEE

about our colour Filters. . .

By maximizing space in a very small sight Gehmann have been able to develop their patented six-colour filter and also a filter housing with 12 individual colours. Combining 2 filter wheels of 12 colours a total of 48 colours can be achieved with our poly-colour filters: 512MC, 564, 568, 568MC, 545MC and 546MC.

This means improved target clarity can be achieved when shooting indoors or outdoors under artificial or natural light conditions.

All filters are precision-made and polished optically flat. Hardened steel bearings on all filter wheels guarantee positive location of filter wheels - even with full-bore use - smooth operation and reduce long-term wear.

sights

page 6

500 snap-in iris and Filter set

• a combination of the 510 iris and five colour filters in yellow, green, brown, light and dark grey - plus two polarisers

• can be used as iris only, iris with one or two colour filters, iris with one or both polarisers or iris with one colour and one polariser

• filters simply snap into place • when two filters are used they ratchet against each other on

machined grooves around their edges thus remaining correctly positioned under the spring clamp

• easy clean instructions included

512mc iris and 48-colour system

• iris• 48 colour combinations in two rings of six colours• can be used as one or other bank of six colours:

1. wheel: yellow, dark green, orange, brown, light or dark grey 2. wheel: light blue, dark blue, lemon yellow, red, light green

and lilac• colours from one ring can be mixed with the other - to provide

the remaining 36 colour options• can be used as an iris only• each engraved with its own number• supplied with 5 external push-fit rubber rings to assist constant

eye position shot after shot• easy clean instructions included

YEA

RS GUARANTEE

prime eFFects oF colour Filters on your sight pictureIf clarity of the black target bull is lost it can be sharpened by our colour filters. These optically flatglass colours allow the passage of specific wavelenghts while restricting others - enhancing the black against the white in varying degrees - dependant on the colour filter selected.

light grey: absorbs 50% of normal lightdark grey: absorbs 75% of normal lightbrown: turns artificial light with a light bluish tinge into what appears as natural daylightlight blue: turns artificial light into natural lightdark blue: as above - used for brighter artificial lightred: enhances black and white contrast and reduces glare from the white surroundorange: effect of clarity is as above however orange also reduces interfering ambient lightyellow: effect is similar to that of orange but over a reduced wavelength (range of light)lemon yellow: effects slightly higher wavelengthslight green: comfortable to the eye - effect as for orange dark green: as above however for more powerful lightlilac: increases contrast in the red / green spectrum

sights

page 7

• laser engraved indications

• matt black finish to eliminate reflected light and distortion of the sight picture

• all internal surfaces are matt black reducing light reflection to a minimum

• infinitely adjustable iris made to our latest patent covering the range 0.5mm to 3.0mm

• six optically flat glass colour filters which can be precisely located in position. Clear settings at either end of the adjustment range for use of iris only or polarisation only

• two polarisation filters1. first ring controls white round target 2. second ring (with stainless lugs) controls light through the sight

• standard thread for all current precision target rearsights

• removable thread allows retro-fit of our - 4.5 to + 4.5 magnifying diopter

• locking collar to enable precise positioning of the 'V' mark

iris colours 1. polariser 2. polariser What our filters can do for you...

- - - improved depth of field

- - enhances contrast

- - eliminates reflections

- enable varying degrees of brightness + eliminates reflections

- enhance contrast while eliminating reflections

provide infinite control of light and meteorological conditions

combinations

YEA

RS GUARANTEE

565 iris, 6-colour & twin polariser

sights

page 8

Katy und matt emmonspresenting their beijing medals

both apply gehmann sights

568mc iris, 48-colour & twin polarisers

• specification as 568 but blue and silver• each engraved with its own serial number• supplied with 5 matt coloured push-fit rubber

rings in red, blue, green, yellow & black attached to the outer knurled ring of your iris ensuring head presentation to the rearsight is perfectly constant shot after shot

• easy clean instructions included

569 iris, 7-colour & 5 grey Filters in blacK and silver • iris 0.5 - 3.0mm• colours: yellow, green, orange, brown, red, lilac & blue

grey scales of: 20, 40, 50, 70 and 90%• retains sight picture clarity longer when this is lost through tiring

during a course of fire• a perfect help when local rules exclude other irises• can be used as an iris only • easy clean instructions included

568 iris, 48-colour & twin polariser

• iris 0.5 - 3.0mm• can be used as one or other bank of six colours:

1. wheel: yellow, dark green, orange, brown, light & dark grey2. wheel: light blue, dark blue, lemon yellow, red, light green & lilac

colours from one ring can be mixed with the other - to provide the remaining 36 colour options

• twin polarisers• can be used iris only• easy clean instructions included

YEA

RS GUARANTEE

sights

page 9

530 iris & 1.5x diopter

• iris 0.5 - 3.0mm• 1.5x diopter with -4.5 to +4.5 correction• detachable diopter (needs 577)

544mc iris & 1.5x diopter

• iris 0.5 - 3.0mm• 1.5x diopter with -4.5 to +4.5 correction• 5 external push-fit rubber rings• detachable diopter (needs 577)• silver and blue

551 iris, twin polarisers & 1.5x diopter

• iris 0.5 - 3.0mm• two polarisation filters• 1.5x diopter with -4.5 to +4.5 correction• can be used iris only or with polariser(s)• detachable diopter (needs 577)• easy clean instructions included

570 iris, 6-colour & 1.5x diopter

• iris 0.5 - 3.0mm• 6-colour filter: yellow, orange, green,

brown, light grey and dark grey• 1.5x diopter with -4.5 to +4.5 correction • can be used without colours• detachable diopter (needs 577)• easy clean instructions included

YEA

RS GUARANTEE

570-r iris, 6-colour & 1.5x diopter

• as 570 above, but red and black

irises with 1.5x diopter correction

Designed to aid shooters without astigmatism suffering failing eyesight but who wish to continue successful shooting. Our magnified diopter range is ISSF compliant and all can be fitted to rifles entered in competitions not specifically excluding magnification. We offer a range with an iris only, iris with polarisers, iris with colours or a combination of all three - iris, colours and polarisers with a diopter. All our iris diopter combinations can be used without the diopter if using our 577 adaptor to replace the front thread.

sights

page 10

• detachable 1.5x diopter (needs 577)

• first polariser ring

• second polariser ring

• iris leaves made of spring steel

• first colour filter ring

• second colour filter ring

546mc iris, 48-colour, twin polarisers & 1.5x diopter

• iris 0.5 - 3.0mm• 48 colour combinations as 568MC• twin polarisers• 1.5x diopter with -4.5 to +4.5 diopter correction• can be used without colours or polarisers• 5 external push-fit rubber rings• detachable diopter (needs 577)• laser engraved serial number • easy clean instructions included• silver and blue

575 iris, 6-colour, twin polarisers & 1.5x diopter

• iris 0.5 - 3.0mm • 6-colour filter: yellow, green, orange, brown, light grey & dark grey• two polarisation filters • 1.5x magnifying with -4.5 to +4.5 diopter correction • can be used without colours or polarisers• detachable diopter (needs 577) • easy clean instructions included

YEA

RS GUARANTEE

about our iris Filter diopter productionThese are complicated products embodying complicated components. To understand this, let‘s look at an example, say 546 MC. Constructed from 81 parts it uses best quality aluminium to give exceptionally light weight but an ability to be machined well. Our colour filters are optically flat glass within metal plates for maximum wear-life and our iris of spring steel using our patented centre pressure-plate system. We explained that this gives our perfect sphere. We also designed the whole unit to be field strippable for cleaning. All of this work going to just one of our units so it is good enough to carry our 30 year guarantee - free!!

sights

page 11

50309 50300MC

50309

50309

577

577

577 thread adaptor

• allows our 1.5x irises to be used without magnifyer

• your magnifyer is unscrewed leaving the filter unit, 577 is attached and your filter returned to the rifle

50309 1.5 x diopter only 50300mc as 50309 but silver

• -4.5 to +4.5 diopter• can be retro-fitted to all Gehmann irises

with a detachable thread - identified by the black back-plate - illustrated right

• simply locked to the iris body and used as before

545mc iris, 48-colour & 1.5 x diopter

• iris 0.5 - 3.0mm• 48 colour combinations but can be used without colours• 1.5x magnifyer with -4.5 to +4.5 diopter correction• detachable diopter (needs 577)• laser engraved serial number• supplied with 5 external push-fit coloured rings• blue and silver

YEA

RS GUARANTEE

All new Gehmann standard irises with detachable thread can be adapted to include our 1.5x diopter by simply removing the front thread, attaching 50309 or 50300MC and locking the two together as shown (left) - removal of the same is a reversal of this procedure (right)

about our product

sights

page 12

501 lens holder (23mm) For our latest irises with a detachable Front thread and without 1.5x magniFied diopter

• the front thread of your iris is removed with the factory spanner• 501`s adaptor thread is screwed into the front of your iris• the iris and 501 are attached to your rearsight after loosening the rail carrier`s allen screw• the lens is inserted in the lens holder which can be removed from the carrier rail if required• the lens holder is positioned to the rear of your iris as required and locked on the carrier rail• our system allows alignment of the carrier to suit you

501a lens holder

• as 501 above, but with female thread adaptor for our earlier irises without a detachable thread and all other manufacturers

501sb lens holder

• as above, but with thread adaptor for Sauer-Busk only

507 6 coloured ring set

• fits all standard 1“ rearsight discs• red, blue, green, yellow, light grey and black• gives an optical illusion that can be used to

advantage for centralising eye to peep-hole

508 6 coloured ring and Filter set • 507 matt rings with six press-in optically flat

14mm glass filters: yellow, green, orange, brown, light and dark grey

• enables use of your favourite ring with one particular filter

• very easy to clean• the coloured rings are designed to both hold

and protect the filters

501 rearsight iris lens holder system

This unit attaches to your rearsight by utilising the strength of your iris to hold it in position once screwed in to your rearsight. It allows attachment of a correction lens which can be positioned along the rail to suit lengths of all irises without correction or magnification.

sights

page 13

579 cls, the adaptors and their use

Generally the first thing shooters notice about their eyesight deterioration is the target picture clarity suddenly becomes fuzzy or appears to move around like a dancing ball.Examination by your opthalmologist will accurately measure and diagnose your symptoms giving you the opportunity to do something about them. Should you suffer from one of the more common problems of myopia (short-sightedness), hypermetropia (long-sightedness) or astigmatism - we can cure them all with one unit - 579.This is produced in two standard factory forms, both carrying our 1.5x magnification correction diopter, one incorporating our iris and 6-colour filter system (570-579) and the other incorporating just the iris (530-579).579 can also be purchased on its own for retro-fit to our irises with the use of adaptors 579-I to 579-III, as illustrated below.There is also consideration of day-to-day variations in your general health as a consequence of heart rate, blood pressure, air quality, stress levels, tiredness and work. Quick and easy compensation for these factors is achieved by simple manual adjustments of 579. These have absolutely no effect on the accuracy of any existing sight settings - which means the immediate benefit of this unique piece of equipment can be appreciated at once.

579 is designed to attach to existing irises and provide astigmatic correction. It will be necessary to fully or partly dismantle your existing iris in order to attach it - this is done with the u-spanner originally provided with your iris. Once dismantled you will require one or other of our adaptor plates - illustrated below.All three adaptors slide inside 579`s body and are simply locked in place with three small allen screws.The adaptor plate is internally threaded to allow both items to then be fitted to your iris. This is done using your existing iris‘s front thread with the exception of 500, 501.MC, 510, and 510-S which require our 577 adaptor thread due to their unique construction.In the case of attaching 579 to a straightforward iris such as 550 - 569 there is nothing else to do.In the case of attaching 579 to a straightforward iris (as above) but also wishing to have a fullerlevel of sight correction it is necessary to introduce either our 50309 (black) or 50300.MC (silver).Instructions for this are included with 579 when bought new.In the case of attaching 579 to a unit already containing a 1.5x diopter the procedure is similar tothat of the straightforward iris mentioned at the beginning...

579-i adaptor

allows use of 579 astigmatic lens with our irises 566, 566-R, 566-S, 567, 570, 570-R & PH.570

579-ii adaptor

allows use of 579 astigmatic lens with our irises 550, 551, PH.551, 563, 565, 568, 569, 575, 512MC, 545MC, 568MC & 546MC

579-iii adaptor

allows use of 579 astigmatic lens with our irises 500, 510, 510-S, 501MC & 564 and for early Gehmann and other manufacturers‘ irises

579-iii + 577-K is used only for 530, PH.530 & 544MC

sights

page 14

(1)

(2)(3) 570-579 cls vari-Focal astigmatic iris

what it is and how it worKs

what it is...

Until now shooters suffering from astigmatism have been obliged to use shooter‘s spectacle frames with their associated cost and need for an optician‘s prescription. 570-579 puts an end to this. It also has the advantage of being fully adjustable so eyes good for one setting at one time of day which may have deteriorated or changed at another can be instantly improved.

The added benefit this sight gives you is even as your eyes age, improve or deteriorate over years, extremely quick and simple adjustments can be made in no more than a couple of minutes.

The basis of the sight is our 570 assembly comprising 510‘s iris which is infinitely adjustable from 0.5 to 3.0mm, our 6 colour filter ring and the 1.5 x magnifying diopter with -4.5 to +4.5 correction. Placed in the heart of these components is the 579 astigmatic unit with a registered design.

how it worKs...

In order to gain maximum benefit from this complicated unit there are set-up procedures to follow which are listed below. These are carried out using our ray diagram placed at a nominal 10 metre distance. This should be clearly seen as a symmetrical design with equal length and thickness radius lines once all settings have been correctly aligned.

setting up ‘sphere‘

This is set up by rotating the milled front ring until the sight picture is slightly blurred or fuzzy then reversing the direction of rotation until the picture is absolutely clear. This is easiest achieved with the iris fully open to 3.0mm and none of the colour filters across the hole.

setting up ‘axis‘

This is set by aligning the 0° - 180° collar with the V datum mark on the main body of the iris nearest your eye. The setting should be in accordance with your most recent eye test prescription - or if this is not possible - turned until the clarity of the picture seen through the iris set to 3.0mm is as clear as you get it. Positioning the collar is achieved by first unscrewing the three small allen screws which then allows the body of the unit to be rotated into position. After optimum clarity is once again achieved the three allen screws are re-tightened.

setting up ‘cylinder‘

This is done by fine-tuning the twin levers on their ratchets. Whichever movement is made with one must be matched by opposite movement of its twin. View the ray design once more and make final setting of the two until the complete picture is both clear and balanced.

Finally...

Having arrived at what may seem a perfect sight picture it may still be possible to gain small improvements by yet more fine-tuning. This requires patience. The spherical collar adjuster can be rotated anti-clockwise again until the picture is blurring then rotated back clockwise until really sharp. The axis was set and locked by you earlier but try unscrewing the three screws again and using minute rotations of the axis body in either direction. If your sight changes for better or worse with time then micro-adjustment of axis are possible by moving both levers the same way - different to the method used for setting cylinder, above. Once these steps are complete viewing the diagram and one or other slight movement of the levers may give that final step needed to gain a 100% improvement on what you saw before.

The ray design target is also downloadable from: www.gehmann.com

570-579 cls vari-Focal astigmatic iris

a revolutionary concept allowing complete correction of varying degrees of astigmatism without need of shooter‘s spectacle frames

• 510 iris• 6 colour filters• 1.5 x magnifyer• -4.5 to +4.5 diopter correction• twin astigmatism correction adjusters• 0°- 180° axis settings

530-579 cls vari-Focal

astigmatic iris

the basis of this is similar to the 570-579 but comprises only a 510 iris, adjustable from 0.5 to 3.0mm, and the 1.5x diopter with -4.5 to +4.5 correction

• 510 iris• 1.5 x magnifyer• -4.5 to +4.5 diopter correction• twin astigmatism correction adjusters• 0°- 180° axis settings

(1)

(2)

(3)

sights

page 15

sb530a

• adaptor for standard irises into Sauer-Busk

ph999

• adaptor for standard irises into Parker-Hale or Redfield

ph510

• iris only, 0.5 - 3.0mm• for Parker-Hale or Redfield

ph566

• iris 0.5 - 3.0mm• 6-colour filter• for Parker-Hale or Redfield

ph565

• iris 0.5 - 3.0mm• 6-colour filter• twin polarisers• for Parker-Hale or Redfield

511

• iris only, 0.5 - 3.0mm• for Karabiner 31

ph551

• iris 0.5 - 3.0mm• twin polarisers• 1.5x magnifying diopter• for Parker-Hale or Redfield

ph570

• iris 0.5 - 3.0mm• 6-colour filter• 1.5x magnifying diopter• for Parker-Hale or Redfield

ph575

• iris 0.5 - 3.0mm• 6-colour filter• twin polarisers• 1.5x magnifying diopter• for Parker-Hale or Redfield

562

• iris 0.5 - 3.0mm• 6-colour filter • for Karabiner 31

sb565

• iris 0.5 -3.0mm• 6-colour filter• twin polarisers• for Sauer-Busk

sb566

• iris 0.5 - 3.0mm• 6-colour filter• for Sauer-Busk

sb510 • iris only, 0.5 - 3.0mm • for Sauer-Busk

sb500

• iris with five colour and two polarised snap-in filters

• with thread adaptor for Sauer-Busk

other models or threads available upon request

special thread irises For some other manuFacturers

sights

page 16

806 rubber eyecup

• easily pressed on to your standard 1“ iris or disc

780w-n + 780s-n issF eyeshields

• the 30mm translucent or black push-fit eyeshield that can be rotated for perfect position

• for standard 1“ irises or discs• 780W-N translucent• 780S-N black

781-n + 781s-n issF eyeshields

• the 30mm translucent or black eyeshield held in position by a rubber collar that fits around the thread or lock collar of your iris• 781-N translucent• 781S-N black

805-w + 805-s rubber eyecup and issF eyeshields

• easily pushed on to your standard 1“ iris or disc• easily aligned• rubber eyecup is comfortable to use and extremely

suitable for full-bore use• 805-W rubber eyecup + translucent eyeshield• 805-S rubber eyecup + black eyeshield

780w & 780s rearsight eyeshields

• easily attached to your standard 1“ iris or disc• simply pushed on to your rearsight iris or disc

and held by the eyeshield`s rubber cup• two layers of translucent or black material give

two levels of opacity • 780W translucent• 780S black • order `L‘ for left-hand and `R‘ for right-hand

shooter

781 rearsight eyeshield

• has a rubber collar sized to fit your iris thread • firmly held by this so as not to be easily moved• translucent only

sights

page 17

590 ` compact`

• the most economical precision target rearsight in the world !• manufactured to typical Gehmann standards but sold at our most affordable price yet• extremely short base with strong double base clamps and stainless steel screws suitable

for all types of rifle• precision machined from solid aluminium• short mounting rail allows maximum movement of the sight for all iris attachments• long standard-threaded tunnel enables use of all irises and anti-glare tubes• large elevation and windage knobs for easy use• attractive but functional matt black finish• bullet shift 1.5mm per click at 50 metres

595 locKable rearsight unit - blacK

• all rearsights suffer from backlash on their threads over time and with use which originally arose at manufacture through machining tolerances. This allows positional movement of the moving surfaces carrying the iris thread hole and gives rise to its positional movement which directly affects accuracy at each shot - this is exacerbated by further thread micro-movements induced by the action of the rifle which increases this effect, producing erratic and unwanted scores

• our patent introduced the unique feature of making a sight lockable, so that once set in position it stays that way. This remains the case throughout the full range of elevation and windage adjustments

• now using larger stainless rods between the moving surfaces and 25% larger base rail clamps for grip - the sight is even better

• once elevation and windage are adjusted the lever is rotated until the sight body is locked maintaining your settings permanently in place

• precision machined from solid aluminium and not using casting• attractively anodised for prolonged weather protection• front and rear threading allows use of an iris on the eye side

and an anti-glare tube on the front side • micro-precision adjustment gives

1.5mm bullet shift per click at 50m• individually numbered

priced to perFection

perFection - at what a priceIt has long been our goal to manufacture a precision rearsight designed to enter the market at as little money as possible. Due to the standards we set ourselves and the costs involved in high quality precision engineering - we were always fighting an uphill battle. Fortunately for us, over time, world engineering machinery has improved markedly and the cost of those machines reduced due to competitive world markets. This made it possible for us to consider how best we might bring the two together in order to achieve our goal. We decided to keep manufacture local, utilise materials and engineering techniques at as little on-cost as possible and so have worked both together to come up with our brand new 590 sight above.Extremely adaptable for all target rifle shootings whether in the garden, on the farm, down at the club or at international competition. It has a remarkable 1.5mm bullet shift at 50 metres for every click of the big elevation and windage knobs, the iris thread is universal and permanently held in a controlled position by a powerfully loaded diagonal spring and piston. The base is as short as we can get it whilst ensuring it remains strong enough to be a solid platform - and the clamping crossscrews of stainless steel give a lifetime`s service. External and internal finishes are non-reflective matt black both for practicality and aesthetic appeal.

If this fits your type of shooting, you want highest precision but not at the highest price, this is for you. Ask your dealer !

sights

page 18

gyda ellefsplass olssen(norway)

multiple european champion

595s

• as 595 but silver

595mc

• as 595 but blue

Early rearsights were engineered in such a way that with use and over time they developed backlash either on the threads or on moving parts within the assembly. Our remit was to design a complete rearsight with no movement once set, something still not available on any other current production rearsight ! In order to achieve this we started with an aluminium billet machined to extremely fine tolerances. No castings being used for any components. The material had to be impervious to corrosion but also provide extreme quality without any excess weight. Stainless silver steel rollers between adjusting and movable surfaces provided a means by which clamping could be applied to lock all moving parts in place. A simple camming-lever (available on 595 & 518 - 540 uses a heavy spring-system) compresses these parts so that they impinge on the rollers. A quarter turn of the lever is all that is required to secure all settings. A side benefit of this rearsight is the absence of the need to lubricate. The tolerances and materials used make this a thing of the past. Pressure air being all that is needed now and again for removing any dust or dirt. The strong base-clamp system allows attachment to a wide variety of rails and is very smooth and easy to use.

595, 518 & 540 rearsight development

sights

page 19

518-ABN + 540-ABN518-AB

518 ‘clearview’ see-through rearsight

• our best see-through sight with a giant 30mm clearview panel• 0.8 - 2.4mm iris is mounted in the front and can be used with

colour filters, a polariser and an anti-glare tube - the filters have been modified to provide improved weather protection• 30mm screw-in colour filters are available (see illustration below)• the sight is locked once set, eliminating any possible shift in aimpoint • large elevation and windage knobs for easy use, manufactured with a strong rail clamp• bullet shift 1.5mm per click at 50 metres• includes a foresight raising block to match the increased rearsight height

30mm & 20mm clearview Filters

• 518-UGR - green - 30mm for 518 only • 518-UGE - yellow - 30mm for 518 only • 518-UDG - grey - 30mm for 518 only• 540-UGR - green - 20mm for 540 only• 540-UGE - yellow - 20mm for 540 only

iris Filters (also suit 540)

• 518-FGR - green• 518-FGE - yellow• 518-FB - blue

518-559anti-glare tube

• also suits 540

518-Fpotwin polariser

• also suits 540

sights

page 20

540 ‘champion’ see-through rearsight

• the latest in our see-through sights• 20mm see-through panel• moveable front iris, adjustable from 0.8 - 2.4mm• colour filters are available as for 518 (left), now modified for

greater weather protection• the iris is detachable from the front with our special tool and

positioned wherever wanted in the tunnel• it is also possible to remove the iris completely and replace it with

a standard iris but this requires the addition of our 540-A adaptor• shorter but stronger rail clamp than 518 with solid clamps and

stainless steel allen securing screws• large elevation and windage knobs for ease of use • perfect for reading wind flags whilst on aim• bullet shift 1.0mm per click at 50 metres

adjusting tool for iris in tunnel

Developed for the Seoul Olympics the 594 `See-Through´ was used by Malcom Cooper from England as an untried item - he won the Olympic three-position gold medal as a result - nothing more needs to be said.Since then it has become a favourite with shooters of all levels of competition and subsequently won gold in Atlanta. Despite this we realised there was room for design improvement so we embarked on changes finally leading to the expanded view 518 'Clearview' and 540 ‘Champion‘ .

gehmann see-through rearsights

sights

page 21

597 issF crossover rearsight prism

• for shooters with one defective eye wishing to shoot with the other

• completely waterproof with an external lens either end for water and dust protection

• centre to centre sight line displacement of 65mm gives no physical change to the sight picture but does require use of a larger than usual aperture

• attachment is direct to a standard 1“ sight disc - or if using one of our shorter iris, via 597A - or a longer iris, via 597B

• a 1“ knurled outer ring is used nearest the eye for attaching an eyeshield or eyecup

597a cradle For 597

• for short body Gehmann irises with or without filters

597b cradle For 597

• for long body Gehmann irises with filters and 1.5x magnifyer

596 12mm sight line displacement

• 12mm radial offset of rear sight line• picture characteristics unchanged• for perfect head-to-cheekpiece position• attaches as 597 above• non-reflective matt black• 1“ collar for eyecup or eyeshield

857 oFFset height adjustable sight bases

• offset sight-line bases with strong steel base clamps and a spacer rod for use on Walther • graduated steel horizontal rods• 4 x spacer and screw sets allow the following heights: 12 (standard), 13.5, 14, 15.5, 16, 17.5, 18, 19.5, 20, 21.5, 22, 23.5, 24, 25.5, 26,

27.5 and 28mm• weight only 170grms• free 985 carry case !

sights

page 22

552 rearsight anti-glare tube combined iris

• an exceptionally slim and longer-than-usual tube for the front of your rearsight - suited to full-bore sights with limited front-side clearance

• incorporates an adjustable iris at its front end for control of the incoming light, centralisation of the foresight picture and control of the amount of white to be seen around the foresight

• iris mount plate can be moved across the tube• rigid in position, easily adjusted whilst shooting• easily removed• fits all rearsights with internal threading at the front

556-25, 556-35 and 556-50 rearsight anti-glare tubes

• extra slim rearsight tubes which can be fitted to rearsights with limited front clearance recesses

• extremely light• different lengths, or combinations, give different

amount of white round the foresight• internally threaded for coupling together (1) or

as an extension of your rearsight iris (2) • code suffix indicates length in mm

553 rearsight anti-glare tube and polarisation Filters

• screws to the front of any rearsight• adjustable twin polarisation filters (1) + (2) allow infinite control of incoming light across the whole sight picture• easily adjusted

554 rearsight anti-glare tube and iris

• screws to front of rearsight• eliminates incoming glare• iris controls incoming light and the amount

seen round the foresight

(1)

(2)

556-35

556-50

559 rearsight anti-glare tube only

556-25

(1)

(2)

sights

page 23

(1)

(2)

523-18523-22

(2)

526-18 m.18 cant adjustable Foresight only

• for all leading types of rifles like Anschütz, Feinwerkbau, Steyr and Walther (including spacer)

• rotates for cant• set in position without tools• easily read due to clear laser engraving• extremely short - 26mm - allowing use of irises and other

accessories so as not to exceed the I.S.S.F. length rule

523-18 Foresight only

• for Anschütz, Feinwerkbau, Steyr and Walther - (needs spacer for Walther base)

• extremely short - 26mm - allows use of irises so as not to exceed the I.S.S.F. overall length rule

• M.18 thread

523-22

• as 523-18, but M.22

558 Foresight anti-glare tube

• M.18 external male thread one end (2), female o-ring the other

• needs 5018 collar for our M.18 irises but screws direct to our M.18 and M.22 lenses

• push-fits to earlier irises without internal threading (1)

558-22

• for our M.22 foresight accessories (but see 558 for lenses)

• our irises may need 5022 collar• our M.22 lenses accept 558 direct or 558-22 with

5022 collar• push-fits to our earlier irises without internal

thread

526-22

• as 526-18, but M.22

523-18.s Foresight only

• as above, but for use with elements• M.18 thread

sights

page 24

• iris for internal diameter

• iris for ring thickness

• flat face unscrewable for accessories

• laser engraved settings

• lock-collar

cross-sectional view

535, 536, 537 ring-thicKening irises „two-in-one“

• patented irises for only one end of the foresight• internal ring and its thickness are both adjustable• quick and easy to adjust your sight picture• consistency of aim point• M.18 but can be used in M.22 with 538 collar• note: to comply with the I.S.S.F. rule limiting foresight length to 50mm, 539 cylinder is used to replace that fitted standard on

the Anschütz 6832 foresight. 539 is included free with 535A, 536A and 537A

538 collar For m.22 sights

• enables M.18 items to fit M.22

539 short cylinder For anschutz 6832 Foresight

• enables 535, 536, 537 and 548 use on a 6832 Anschütz foresight without exceeding the I.S.S.F. overall length rule

• laser engraved indications • illustration above ready-fitted to one of our irises

535 `two-in-one‘

• horizontal level bars • infinitely adjustable • with ring-thickening

536 `two-in-one‘

• ring only • infinitely adjustable • with ring-thickening

537 `two-in-one‘

• crosshair • infinitely adjustable • with ring-thickening

sights

page 25

528 `double-cross` iris m.18

• can appear as a metal element with horizontal bars or easily switched to a fine crosshair

• uses one side of the foresight only• supplied with a plastic tool to

rotate the bars

528-22

• as 528, but M.22• also available in a

special ‚D‘ size: 5.5 - 7.5 mm

520-22

• infinitely adjustable• horizontal level bars

520

• infinitely adjustable• horizontal level bars

522-22

• infinitely adjustable• ring only

522-22-s

• infinitely adjustable• ring only• as 522-22, but

silver & black

522

• infinitely adjustable• ring only

522-s

• infinitely adjustable• ring only• as 522, but

silver & black

525-22

• infinitely adjustable• crosshair

525

• infinitely adjustable• crosshair

gehmann Foresight irises m.18, m.22 and 1¼¨ threaded

m18 fits to anschütz, Feinwerkbau, steyr and walther etc.

m22 fits to Feinwewrbau - models 602, 603, c62, p70, 500, 700, 2602 +2700 and latest steyr

Different light conditions give differing sight pictures to the individual shooter’s eye. The use of an adjustable iris regulates the light coming from the target as well as allowing personal choice of the amount of white seen around the bull. Both maximize the chance of precise central location, shot after shot.Using our free clip-on external ring shooters can also enlarge the blackened area seen round the foresight. Further foresight picture clarity is available using our lenses, polarising and external white area screens.

m.18 m.22

sights

page 26

DA B C

order code M.18 M.22 1 1/4“ x 28 range

520 / 520-22 / 520-35 / 535 / 535A - horizontal level bars X X X522 / 522-22 / 522-S / 522-22-S / 536 / 536A - ring only X X525 / 525-22 / 537 / 537A - crosshair X X520A / 522A / 522A-S / 525A X 2.4 mm - 4.4 mm520B / 522B / 522B-S / 525B X 4.0 mm - 6.0 mm520C / 522C / 522C-S / 525C X 2.9 mm - 4.9 mm520A-22 / 522A-22 / 522A-22-S / 525A-22 X 2.4 mm - 4.4 mm520B-22 / 522B-22 / 522B-22-S / 525B-22 X 4.0 mm - 6.0 mm520C-22 / 522C-22 / 522C-22-S / 525C-22 X 2.9 mm - 4.9 mm535 / 535A / 536 / 536A / 537 / 537A X inner ring: 2.4 mm - 4.4 mm / outer ring: 7.0 mm - 9.0 mm535 - 537 + 548A & 548B using thread adaptor 538 to fit M.22 X inner ring: 2.4 mm - 4.4 mm / outer ring: 7.0 mm - 9.0 mm528A - horizontal level bars or crosshair X X 2.4 - 4.4 mm528B - horizontal level bars or crosshair X X 4.0 - 6.0 mm528C - horizontal level bars or crosshair X X 2.9 - 4.9 mm 528D - horizontal level bars or crosshair X 5.5 - 7.5 mm521FQ - horizontal level bars or crosshair X inner ring: 2.9 mm - 4.9 mm / outer ring: 7.0 mm - 9.0 mm521G - ring only X inner ring: 2.9 mm - 4.9 mm / outer ring: 7.0 mm - 9.0 mm548A - square X 2.4 mm - 4.4 mm548B - square X 4.0 mm - 6.0 mm549 - triangular X 3.2 mm - 4.2 mm549-22 - triangular X 3.2 mm - 4.2 mm520A-35 - horizontal level bars X 2.4 mm - 4.4 mm520B-35 - horizontal level bars X 4.0 mm - 6.0 mm520C-35 - horizontal level bars X 2.9 mm - 4.9 mm520D-35 - horizontal level bars X 5.5 mm - 7.5 mm

520-35 Foresight iris 1 1/4“ • special sized for big bore foresight units as 529 • infinitely adjustable iris• horizontal level bars• exclusively available in the USA at:

www.stallingsmachine.com

529 big bore Foresight unit „rightsight“ • special sized (1 1/4“) big bore foresight unit for our foresight irises 520-35 • with detachable anti-glare tube and 1.5x lens • spirit level with a medium-to-slow bubble that

runs through twin markers• laser engraved degrees marked for reference • exclusively available in the USA at:

www.stallingsmachine.com

Foresight irises

sights

page 27

(4)

(1)(2)

5022

(3)

5018

5018 and 5022 Foresight adaptors

• all our new foresight irises with a small mark between the two limit-of-adjustment marks (1) accept thread adaptors

• the flat face of the iris can be unscrewed (2) and an adaptor inserted (3) for use of other accessories (4)

• 5018 is for our M.18 & M.17 irises to use lenses, screens, levels or anti-glare tubes

• 5022 is for M.22 foresights

• we manufacture all our irises with a wider range of adjustment, shorter overall length and super matt finish, both internally and externally

• calibrations are laser cut• 520 and 535 appear as a standard metal element with

horizontal bars, 522, 522.S and 521.G as a perspex element and 525 and 537 as a crosshair - 528 and 521.FQ can easily be switched from horizontal level bars to a fine crosshair

• once set the iris is held in position with a lock-collar • models 521.G, 522 and 536 use glass (not perspex) optically

finished to eliminate image distortion• the iris is lacquered during production for smooth operation

throughout a lifetime‘s use• M.18 for Anschütz, Diana, Hämmerli, Steyr, Walther etc.• M.22 for Feinwerkbau, latest Steyr models, R.P.A. etc.• 1 1/4“ for high power rifle competition foresights (30mm)

• our irises enable the target picture clarity to be retained while shooting

• personalisation of the amount of white seen round the bullseye is easily adjusted by a quick twist and negates need for time-wasting by inserting standard individual elements

• all our M.18 and M.17 foresight irises are supplied with an additional push-fit annular ring which can be applied to the shooter‘s side of the foresight to increase the external black area around the aiming picture

• adaptor 5018 is available for attaching our M.18 lenses, levels, screens or an anti-glare tube. 5022 for M.22 applications - however our M.18 foresight tube will screw directly to our 581-22 level and M.18 + M.22 lenses if this is required. The flat face of the iris nearest to the shooter is unscrewed with the use of a broad rubber band across one thumb and the adaptor inserted ready for the attachment of our accessories.

Foresight irises

gehmann´s interchangeability oF units is uniQue

sights

page 28

(1)

549 & 549-22 triangular iris

• infinitely adjustable from 3.2 - 4.2mm• gives a precise central location of the target• available with M.18 thread: 549

or with M.22 thread: 549-22

548a & 548b sQuare iris

• both sides adjustable to form a square or rectangle by a twist of either calibrated external ring

• adjustment range for the top and bottom or the sides is the same

• for one side of the foresight only• available with M.18 thread:

- 548A: 2.4 - 4.4mm- 548B: 4.0 - 6.0mm

• needs 539 tube for use on Anschütz• 538 collar required for fitting M.22 foresights

521.FQ 'double-cross' ring-thicKening assembly

• a complete iris and tube assembly with 528 'Double-Cross'• 2.9 - 4.9mm one end, 7.0 - 9.0mm the other• specifically for mounting to the later Anschütz 6832 foresight• body tube is marked with degrees for angle of cant• complies with I.S.S.F. overall length rules• internally threaded at the ends for lens and tube• special tool included (1)

521.g 'ring only' ring-thicKening assembly

• as 521.FQ - ring only appearance

parKer-hale

PH520A, PH520B + PH520C PH522A, PH522B + PH522C

tanner

TA522A + TA522C TA528A, TA528B + TA528C TA535 + TA537

m.17

520A17 + 520B17

M.18 M.22

other models or threads available upon request

special - thread irises

sights

page 29

532 Foresight polarising screen

• screens incoming glare round the element• attaches to either end of the sight• may be used with a normal element or iris• 10 - 90% light absorption• M.18 thread

533-18 twin polariser Kit

• fitted at both ends for total light control • M.18 thread

533-22 twin polariser Kit

as 533-18, but M.22

531.Q

• as 531, but appears as a metal element• M.18 thread - needs 538 collar for fitting

M.22 foresights

547 m.18 element grip collar

• matt black anodised • for 542, 546 & 546-R

547-22 m.22element grip collar

• as above, but for larger elements as 542-22 & 546-22

531 iris & selF-polarising screen to control light round iris

• appears as a clear perspex element• adjusts from 2.9 to 4.9mm• polarised outer screen round the iris eliminates

incoming glare thereby enhancing target clarity• free push-fit ring to enlarge outer edge of the iris• M.18 thread

542 & 542-22 elements

• clear with thin black ring• in any size within the range of 2.7 - 5.2mm • 542 for M.18 - 542-22 for M.22

546, 546-r & 546-22 elements

• available in sizes within the range of 2.8 - 6.0mm (rising in 0.2mm increments)

• 546 for M.18, clear - 546-R for M.18, red 546-22 for M.22, clear

sights

page 30

(1)

581 radially adjustable spirit level

• M.18 medium-to-slow bubble that runs through twin markers• screws into the foresight and is held in place by a lock collar

- a c-spanner is provided to lock it in position• once in your position on the rifle whatever angle of cant you

normally use can be set by simply rotating the whole bubble on it`s ratchet system

• a friction collar holds your setting without need of more tools• laser engraved degrees marked for reference

581-22

• as 581 above, but for M.22 foresights• 581-22 has an internal M.18 thread for attaching a lens,

filter screen or anti-glare tube (1) - accepts 558 direct

591 m.18 spirit level

• fits under the foresight element or iris clamp ring

• seen over the foresight • easily repositioned and locked

592 rearsight spirit level

• fits on the front receiver rail and is seen through the rearsight underneath the sight-line so reference to the bubble involves the minimum of eye movement

• micrometric positioning of the level is achieved with the small knurled wheel on one side

• now made with a slow reading curved bubble

• easily detached and cleaned

583 spirit level illumination with two colour Filters and iris

• a variable intensity (iris-controlled) illuminator which can be easily clipped over our latest 591, 581, 585-FP and someother manufacturers' levels

• with on / off switch• filter colours are yellow and green to improve the contrast

in your bubble and the target

591-22

• as 591 but for M.22 foresights

sights

page 31

5,04,54,03,53,02,52,01,51,00,50,0

350 400 450 500 550 600 650 700 750 800

524 m.18 iris screen

• screens unwanted white from around the foresight element• aids definition of the aiming ring by eliminating glare • eases eye fatigue• iris leaves are coated with latest matt black anti-glare finish• needs 538 collar for fitting M.22 foresights

524-1.5 iris screen with 1.5x mc lens

• specification as above but with our latest 1.5x wideband MC coated lens

• reduces glare for a sharper picture over longer periods• M.18 thread - 538 collar required for fitting M.22 foresights

584 1.5x lens with wideband mc coating

• wideband MC lens giving only a 0.5% light loss• designed to minimice refraction• laser centred during coating to ensure a perfectly smooth layer• M.18 with M.18 internal thread for attaching our

anti-glare tube and / or a spirit level - 16mm lens diameter

When standing in front of a pane of clear glass you see your own image. This is caused by a property of the glass which obstructs the passage of light. This is normally in the order of a 4% to 10% loss. If we apply this principle to our foresight lens it can be seen we will inevitably lose some of our sight clarity. The latest science has helped us to reduce this. When our special wideband optical coatings are vacuum applied the treated lens immediately allows more light to pass. Historically this gave roughly a 4% improvement with one coating. Increasing these to two or three coats improves this to 8%. A more modern technology still allows the layers to be increased to six where we find light loss is down to 0.5% - a terrific improvement. Better yet, the red and blue ends of visible light are expanded in bandwidth. These bands are controlled by our multicoating process eliminating spectral distortion. Normal light visible via the human eye is in the 380 - 780nm range but following our process the benefit can clearly be seen in our graph.

wideband mc coatings reduce light loss by 99.5 % on uncoated glass,

here‘s how...

wavelength (nm)

refle

ctio

n %

reflection level

584-22 as above For m.22 Foresights

• M.22 with M.18 internal thread - 18mm lens diameter

sights

page 32

586 1.3x wideband lens

• wideband MC coated lens giving only 0.5% light loss where other manufactures can be anything up to 8% !

• designed to minimise refraction• laser centred during coating to ensure a perfectly smooth layer• M.18 with internal thread for attaching our M.18 anti-glare tube or

spirit level - 16mm lens diameter

586-22 as above but m.22

• M.22 with M.18 internal thread - 18mm lens diameter

our lenses are threaded internally for the addition of other M.18 sight accessories - with the exception of 580 (below)

580 1.5x broadband lens

• M.17 (older threads) - 15mm lens diameter

578 1.5x wideband mc lens

• 1.5 x magnification• wideband MC lens losing only 0.5% light loss• designed to minimice refraction• laser centred during coating to ensure a perfectly smooth layer• M.18 with internal thread for attaching our M.18 anti-glare tube or

spirit level - 16mm lens diameter

578-22 as above m.22

985 carry case

• an alloy edged solid carry case with egg-box foam internal padding and an over-centre clip lock.

• ideal for shooting frames, sights or valuable accessories

• sizes: 20 x 16 x 5cms

• M.22 with M.18 internal thread - 18mm lens diameter

sights

page 33

748 sight blacK

• stops reflected glare• quick drying• easy to use• net. weight 3.5 oz (100 grms)

746 and 747 Foresight covers

• 746-LK leather - for standard size foresights• 746-LG leather - for higher profile foresights• 747-LK as 746-LK but artificial material• 747-VG as 746-LG but artificial material

5003 & 5004 rearsight & Foresight dust caps

• simple plastic caps to keep dirt off expensive sights

• 5003 for rearsights and M.22 foresights• 5004 for M.18 and M.17 foresights

sight tools

• 5005 rearsight spanner• 5007 rearsight lock-collar• 5006 foresight spanner M.18 + M.17• 5008 foresight spanner M.22 • 5009 foresight lock-collar M.18• 5010 foresight lock-collar M.22

sights

page 34

505 archery iris

• suitable for commercial bow sights• 22 indexed points from 0.5 - 12.0mm• iris leaves with special surface coating to eliminate oxidation and to preserve the matt black anti-glare finish• archers can focus on the same colour rings at different distances with an identical target picture for all• bow hunters can determine distance to the quarry by noting the iris aperture for a given game silhouette• available in 3 stainless steel threads: 505 8/32“ 505-1032 10/32“ 504L M4/65 others available so please enquire

sighting aids available:

• 502 vertical post with red tip • 503 crosshair • 506 black dot• easily mounted using a mini-wrench• simply screwed on its mount• adjustment ring allows exact positioning of the aid with

the added advantage of an emerging off-centre tunnel• effect to indicate cant

archery

sights

page 35

• finished in attractive matt silver

• sliding mount sets holder position on the crossbar plus up or down angle

• 23mm (300) or 37mm (300P) lens holders are easily rotated laterally round the top mount

• your face width is matched by setting the crossbar into one of three matching holes in the end of the side-bar mount

• nose-bridge adjustable for height and radius

• adjustable side-bars

• comfortable, softly sprung earpieces

300 + 300p gehmann Frames

• 300 with 23mm lens holder• 300P as above, but standard with 37mm holder• free 985 carry case

gehmann Frames - looKing For something better ?

shooting Frames

page 36

• 313 universal angle bracket allows the lens holder to be offset

985 carry case

• an alloy edge solid carry case with 20 x 16 x 5cms internal egg-box foam padding and an over-centre clip lock and swiveling carry handle

• ideal for shooting frames, sights or any valuable shooting accessory

340K 23mm clip-on iris340 37mm clip-on iris

I.S.S.F. flip-up eyeshields with 305 clamp • 301S-N black• 301T-N translucent• 301W-N white

I.S.S.F. clip-on sideshields• 338S-N black• 338T-N translucent• 338W-N white

344K 23mm centerer344 37mm centerer

340-T 37mm clip-on iris with translucent mount

385 trap or sKeet glasses

• wide field of view• rigid polyamid frame• length adjustable side-bars• with three lenses:

grey, yellow and clear

300 illustration showing some oF the accessories

shooting Frames

page 37

330

335

332

330 and 332 Knobloch Frames

• 332 with height adjustable nose-bridge• 330 which is non-adjustable (order 330L for left-hand)• a wide range of accessories is available

- see price list for further details• suitable for iris, eyeshields, sideshields, polariser, etc.• may be purchased as a complete boxed set - 350

335 Knobloch 'junior'

• a reduced size set of frames for juniors

337 rotational 3 colour filter

I.S.S.F. clip-on sideshields• 338S-N black• 338T-N translucent• 338W-N white

340K 23mm clip-on iris340 37mm clip-on iris340-T 37mm clip-on iris with translucent mount

344K 23mm centerer344 37mm centerer

I.S.S.F. flip-up eyeshields with 367 clamp• 339S-N black• 339T-N translucent• 339W-N white

flip-up eyeshields with sideshields and 367 clamp• 333S black• 333T translucent• 333W white

Knobloch Frames

shooting Frames

page 38

328 offset nose-bridge

lens holders with 367 clamp354 -23mm - vario lens holder342/23 -23mm 342/23GK -23mm - stepped shank342/37P -37mm - for filter mounting

352-23 filter inserts (23mm)352-37 filter inserts (37mm)

367 + 367-S crossbar clamps for eyeshields and lens holders

320 & 320.p

• 320 rifle with 23mm holder• 320.P pistol with 37mm holder• height adjustable nosebridge• I.S.S.F. flip-up translucent eyeshield • accepts all accessories and both size holders• super-matt silver finish• rubberised flexible earpieces• cased

varga accessories

Varga frames accept the specialised accessories below:• 325 iris• 327 holder with a hinge in

the vertical post (23mm diameter)

• 328 offset nose-bridge for shooters using an extreme angle of sighting so the lens does not foul the nose

• 321-N Varga 30mm flip-up eyeshield

325 iris

327 lens holder

321-N I.S.S.F. flip-up eyeshield

324 clamping piece for eyeshields 321 + 321-N, made of plastic

324-M clamping piece for nose-bridge support bar, made of metal

352T23 23mm clip-on filter holder352T37 37mm clip-on filter holder

varga Frames

Knobloch accessories

shooting Frames

page 39

392 set oF 3 push-in colour Filters For 390

• colours: yellow, brown and grey

391, 391-30.n, 391.s, 391.s-30.n clip-on eyeshields

• clips on as 390• can be flipped up for normal vision• right- or left-hand shooter

390 clip-on iris For ordinary glasses

• attaches to normal glasses with a rubber tipped sprung clamp• flips up and stays up for normal vision• a superb iris that can be positioned within the sprung mount-plate allowing quick,

easy and perfect alignment• iris leaves with our latest surface coating to eliminate oxidation and to preserve

the matt black anti-glare finish • once set it vastly improves depth of field to sharpen the rearsight and foresight

picture

393 sticK-on adjustable iris

• a mini stick-on iris for ordinary glasses• improves depth of field• exceptionally lightweight• iris can be radiused round the sticker

and rotated around its support post• exceptional quality at an attractive price

I.S.S.F. 30mm:

391 - light

391.S - dark

391-30.N - light 391.S-30.N - dark

shooting Frames

page 40

395 headband with iris

• velcro-fastening headband with flip-up adjustable iris to improve depth of field

• the iris can be moved on the carry plate to suit your position• iris leaves with our latest surface coating - see above• for pistol shooters not wanting frames or their associated cost

373 headband, 23mm lens holder and eyeshield

• velcro-fastened blue headband• 23mm articulated lens holder• 30mm flip-up eyeshield - cased

374 headband, 37mm holder & eyeshield

• velcro-fastened headband• 37mm lens holder • I.S.S.F. flip-up eyeshield - cased

397-n headband, iris and eyeshield

• as 395, but with I.S.S.F. light, flip-up eyeshield• good value for money

349 Knobloch headband

• velcro-fastening headband • 30mm flip-up eyeshield

348 Knobloch headband

• velcro-fastened headband with shooting frame and lens holder - cased

397-N

Our latest innovation is found in the iris itself...The surface coating on the material used for the construction of our irises is one of the latest technological breakthroughs in Gehmann’s programme.It is designed to permit flexing of the iris leaves without degradation of the material through prolonged use, to eliminate oxidation and to preserve the matt black anti-glare finish essential to any form of sight.

If you are a shooter wishing to use the latest technology Gehmann is the name to remember !

about our product

headbands, shooting caps etc.

page 41

446W-N 446G-N 446W 446G

444 & 449 headbands

model band velcro eyeshield

449-N blue white (30mm)449G-N blue grey (30mm)

449 blue white

449G blue grey444BW-N blue white (30mm)

444GW-N grey white (30mm)

444RW-N red white (30mm)

444BG-N blue grey (30mm)

444GG-N grey grey (30mm)

444RG-N red grey (30mm)

444BW blue white

444BG blue grey

444GW grey white

444GG grey grey

444RW red white

444RG red grey

446 eyeshields446W-N white (30mm)

446G-N grey (30mm)

446W with white

446G sideshield grey

80% cotton20% polyester

44565% cotton35% polyester

445 red & 445.b blue summer caps

• for summer or hot climates• completely open top• fully adjustable for all sizes• extra long peak• sideshields easily positioned

443.sg green & blacK 443 red & blue caps

• velcro-closure to suit all sizes• inner sweatband• ventilated top for coolness• velcro-fastening sideshields and eyeshield

443.SG 443 445.B

headbands, shooting caps etc.

page 42

1)

2)

445

447 & 447-s gehmann visors

• two peaks of different lengths: 1. long for standing and kneeling2. short for prone

• velcro-closure and velcro attached peaks for ease when changing• 447: navy and dark grey

447-S: black

448 standard visor

• velcro-closure• blue and black

704.v mec visor

• velcro-closure

448-s visor

• velcro-closure• black

375 cap

• adjustable closure to suit all sizes• 23mm holder and I.S.S.F. light eyeshield

376 cap

• width adjustable closure as 375 • adjustable 37mm lens holder • 30mm flip-up eyeshield

headbands, shooting caps etc.

page 43

• pierce-through buttons allow personal tailoring

• suede panels give comfort in non-critical areas and supports your elbow pad while standing

• suede panels on chest and top of arm gives stable contact between the surface to maintain the shooter‘s position

401

• softer stretch material under-arm, inside elbows and on the inner sleeve for improved comfort• patented cut to upper arm and chest area eliminates material tucks and avoids interference

with the stock• double canvas guarantees long-lasting rigidity• inner canvas also gives improved rigidity but remains comfortable shooting 3-P• the sling loop precisely locates height, angle and three choices of sling attachment:

1. using the hook through the sling‘s cut-out2. having the sling resting in the sling loop3. having the sling resting in the hook itself

• personal colour combinations are available to order• made-to-measure option

• ‘Top-Grip‘ rubber on shoulder and elbows for improved grip

although all criteria were double-checKed prior to launching

this jacKet we have endeavoured to improve it Further still with the

Following:

1. tension straps for the shooting shoulder are now external2. top buttons have been moved in sympathy with the new cut

at the top redesigned not to interfere with the rifle stock or the supporting arm when in the standing position

3. the suede front has been widened to improve both, the non-slip area and the aesthetic appeal

4. inner sleeves are made of soft material, without stitching, to avoid disturbing tucks - patented design

canvas and leather Quality

clothing

page 44

401

• personal colour combinations of your choice are available to order

426 double canvas trousers

• identical material and tailoring quality to the 401 jacket• remains rigid longer for extended wear and greater support• three-way zips behind the leg eliminate material tension behind

the knee - one of the zips is curved along its length to avoid interference from the zip - adjustment is quick and easy

• velcro fastening fly from waist to top of thigh combines with an inset lower gusset to provide greater comfort when kneeling

• softer material panel over the thigh muscle helps kneeling• ‘Top Grip‘ on seat and legs eliminate unnecessary movement• available made-to-measure

outer material: 60% canvas, 40% leather

`Top-Grip´ rubberinner material: 100% canvas

outer material: 100% canvas `Top-Grip´ rubberinner material: 100% canvas

three-way zip runs around the leg

velcro fly and multi-hook belt

clothing

page 45

403 double canvas jacKet

• redesigned again, this popular jacket now incorporates ‘Amara‘ non-tear material for supple and strong support across the upper back, upper inside arms and on the top chest strap

• patented soft seamless inside fore-arm material and patented button loops provide terrific value-for-money, making this jacket extremely suitable for entry-level or club shooters wanting proper support without the expense of a high quality jacket used by an international shooter

• mainly double canvas• pierce-through buttons provide precise fit• very dark blue and black with white• not available made-to-measure

outer material: 80% canvas 20% amara rubberinner material: 100% canvas

clothing

page 46

409 junior & club

• mainly double canvas but overall very light• ambidextrous• upper back and sleeves are now made with ‘Amara‘ a new

softer non-rip material which has the double advantage of providing strength with comfort

• both shoulders padded for the rifle`s butt• the sling attachment can be moved for left or right

shooter and is adjustable for it`s length• over-the-shoulder tension straps both sides• junior sizes only - enquire• unbelievable price !

407 double canvas trousers

• double canvas trousers to match 403• deep blue and black with designer panels to assist

shooting but also to give style to the complete suit• velcro fly and waist fastening• full-length two-way zip behind the leg remove pressure

points when kneeling• the rigidity prevents unwanted movement in any position• not available made-to-measure

outer material: 75% canvas, 25% amara, rubberinner material: 100% canvas

outer material: 100% canvas, rubberinner material: 100% canvas

jacKets and trousers For all levels From beginners to champions

clothing

page 47

404 canvas and leather jacKet

• for men, in rigid unbleached canvas with blue suede panels and blue trim• cut to maximize support and comfort in all positions• pierce-through buttons enable personalising a perfect fit• over-the-shoulder straps remove tucks on the shoulder pad• adjustable sling strap with a hook designed to match our slings• anti-slip rubber on elbows ensures a stable position• suede front panel supports your elbow pad when standing• also available in special sizes for people who are slightly shorter and have

a larger stomach - if required please contact your dealer• not available made-to-measure

404also available in special sizes: 25, 26, 27, 28, 29 + 30 - for people who are slightly shorter and have a larger stomach

fully adjustable sling loopover-the-shoulder tension straps

jacket:outer material: 50% leather + 50% canvasrubberinner material: 100% canvas

aren`t they a lovely couple ?

clothing

page 48

427 double canvas trousers

• designed to match the 404 jacket• primarily unbleached canvas for rigidity• colour matched vertical panels - trimmed in blue• cut for greatest support in all positions• velcro-fastening waist band and the belt loops are matched with blue leather• velcro fly• soft top of thigh inserts eliminate tension when kneeling• vertical three-quarter length two-way zips are positioned behind the leg• ambidextrous fitting• not available made-to-measure

404.r canvas and leather jacKet For ladies

• as 404 but trimmed red for the ladies• a first in shooting clothing - a deliberately matched

male and female jacket - suitable for `him and her`• smaller ladies’ sizes only

427.r double canvas trousers

• trimmed with red to match 404.R• velcro-fastening waist• smaller ladies’ sizes only

buttonholes are trimmed

in red leather

trousers:outer material: 100% canvasrubberinner material: 100% canvas

clothing

page 49

414 double canvas jacKet

• double canvas construction affords maximum rigidity and support for all disciplines, however our use of softer, elasticated black material in the under-arm and crook of the elbow provides good comfort in all shooting positions

• two tension straps are included over the shooting shoulder to eliminate tucks on the shoulder pad

• `Top Grip´ rubber on all non-slip surfaces• swivelling and infinitely adjustable sling strap• personal tailoring with pierce-through buttons• white with navy panels• available made-to-measure

422 double canvas trousers

• double canvas quality to match 414• in black and white to compliment 419• velcro fly with 3 hook 2“ waistband• waistband accommodates a broad belt• extra long two-way zip to relieve any rear

leg pressure and to aid comfort when the legs are bent

• `Top Grip´ rubber surfaces match 414 + 419• available made-to-measure

419 double canvas jacKet

• a rigid canvas outer layer over a softer canvas inner lining• elasticated under arm and inner elbow to give the best comfort • `Top Grip´ rubber on shoulder and elbows• over-the-shoulder straps to remove tucks on the

shoulder pad• revolutionary sling attachment incorporates an artificial

material strap punched with metal ringed holes to reduce wear - design enables precise sling settings in height and angle

• personal tailoring with pierce-through buttons• mainly white with black• available made-to-measure

outer material: 97% canvas 3% leather `Top Grip’ rubberinner material: 100% canvas

outer material: 95% canvas 5% leather `Top Grip’ rubberinner material: 100% canvas

outer material: 98% canvas 2% leather `Top Grip’ rubberinner material: 100% canvas

competitive style

clothing

page 50

405 men and women matched jacKets

• blue for the boys and red for the girls....• double canvas• soft lined inner sleeves• soft elasticated inside elbows and under arm • pierce-through buttons for personal tailoring• over-the-shoulder tension strap to remove

tucks• adjustable sling strap with a hook designed

to match our slings• competitor number clips on the back• not available made-to-measure

outer material: 100% canvas, rubber, inner material: 100% canvas

clothing

page 51

400 double canvas shooting jacKet

• redesigned cut across the shoulder to remove material tucks, changed to softer, seamless inside upper arm material and introduced new patented button loops

• mainly double canvas• extremely rigid but with soft panels in

critical areas to provide better comfort and support in all positions

• suitable for all disciplines• anatomically cut for all shooting

positions• over-the-shoulder straps remove tucks

on the shoulder pad• anti-slip rubber on the shooting

shoulder and elbows• suede front panel supports your elbow

pad when standing• personal tailoring with pierce-through

buttons• not available made-to-measure

423 canvas trousers • material and colours match 400• suits right- or left-hand shooters• front thigh cut-outs for kneeling• full length zips avoid discomfort• bolstered anti-slip rubber seat for best support

and matching knee panels to eliminate creep• velcro fastening waist• not available made-to-measure

outer material: 60% canvas, 40% leather,rubberinner material: 100% canvas

outer material: 100% canvas, rubberinner material: 100% canvas

clothing

page 52

418 leather and canvas jacKet

in a superbly supple leather which allows unbelievably easy personal tailoring for fit - once done it is delightful to wear and incredibly popular with all types of rifle shooter benefits from a totally neutral but practical colour combination canvas lined to provide essential support and rigidity when needed• anatomically cut in manufacture to ensure the best possible fit when new but easily tailored to suit your shape when in the shooting position• elasticated straps under arm and on the inner elbow give great support and comfort• over-the-shoulder straps remove tucks on the shoulder pad• anti-slip rubber at shoulder and elbows• finished in a durable black and white• personal tailoring possible with pierce-through buttons• available in special sizes for people who are slightly shorter and have

a larger stomach - if required please contact your dealer• not available made-to-measure

outer material: 100% leather,rubberinner material: 100% canvas

clothing

page 53

special equipment forthe seniors‘ discipline

842 rearsight extension base835 alloy butt pad

416 canvas jacKet

• designed for the European seniors‘ discipline but suitable for shooters wanting good standing support without sleeve restriction

• suits match air rifle shooters and warmer climates• personal tailoring with pierce-through buttons• available in special sizes for people who are slightly

shorter and have a larger stomach - if required please contact your dealer

417 leather & canvas jacKet

• mainly black and white leather outer with inner canvas and similar in style and quality to the excellent 418

• special very short sleeve design for the special German seniors‘ standing discipline where the rifle is rested on a stand

• upper inner back and the short sleeves are lined with a soft micro-mesh material designed to provide maximum comfort

• ambidextrous• personal tailoring with pierce-through buttons• available in special sizes for people who are slightly

shorter and have a larger stomach - if required please contact your dealer

• not available made-to-measure

outer material: 100% leather,rubberinner material: 100% canvas

outer material: 95% canvas + 5% leather, rubberinner material: 100% canvas

clothing

page 54

281 2mm `top grip´

• 95 x 45cms sheet of `Top Grip´ rubber for old or worn surfaces or for use on other garments

282 2mm `top grip´

• 95 x 95cms, 2mm thick

282-4 4mm `top grip´

• 95 x 95cms, 4mm thick

424 braces

• 35 mm wide• snap-clip fitting• blue

424hK dutch-cross braces

• 35 mm wide• button fitting• blue

428 belt

• made of the same artificial material as our single-point sling• double hook and stepped adjustment holes

486 buttoning aid

• a simple hook to aid buttoning jackets and trousers• very quick and easy to use

488 200ml canvas stiFFener

• `COTTONFIX´ is a prepared substance manufactured to provide original rigidity to canvas clothing

429 pierce-through buttons

• threaded buttons suit all canvas and leather jackets and trousers

• specify large (429G) or small (429KS)• black only

424 proFi braces

• designed not to interfere with the rifle butt

• 35 mm wide - one-side-only• black

85% polyester15% elastan

do you need both belt and braces ?

This material was created years ago for Gehmann jackets, trousers and gloves. It is now the accepted industry standard where greatest grip is required.Specifically used in areas where shooters make contact between themselves and other parts of their shooting equipment - or where two areas meeting require absolute security of position. The material is attached to a pliable rear surface which aids machining and later attachment to the areas in question. When pressure is applied the `Top Grip´ high spots depress slightly to provide a non-slip contact area. This platform is one Gehmann use to maximum advantage. Although expensive in production there is no substitute.

Gehmann would like you to shoot with the best - so cost is put aside in our aim to give you the very highest quality.

Top-Grip

clothing

page 55

727

721

733

731

724

720725

728

475 shooting underwear

• extremely elastic and providing a tight fit to avoid high spots under other shooting garments

• anti-allergic material to suit all skin types• no.7 sun-factor protection in the material• designed for to be warm in winter and cool in summer• resistant to absorbtion of other colours• easy-care, easy-wash, quick-drying material• long wearing• manufactured with ecological sensitivity in

a 100% poly mix• black• available sizes: small - medium - large - extra large

725 silencio ear plugs

• with a metallic membrane - cased

720 ear plugs

• foam plugs in packs of ten

724 peltor deFenders

• thicker insulation providing higher levels of protection• collapsible, weight: 180grms - black

721 mec ear plugs

• membrane for good filtration - cased

727 arton 1000 ear deFenders

• extremely comfortable, collapsible, weight: 240grms - beige

731 ear deFenders, small-bore

• good padding, collapsible, weight: 190grms - red

733 ear deFenders, Full-bore

• thick padding, collapsible, weight: 250 grms - blue

728 peltor deFenders h4a

• normal padding, collapsible, weight: 150grms - blue

476 vest

• with padded elbows - sizes as above

477 leggings

• available sizes as 475 above

stylish & practical undergarments designed to give you the greatest comFort in all climatic conditions

clothing + ear protection

page 56

467 halF-cover glove with top grip

• best quality black and white leather• maximum I.S.S.F. width elasticated wrist• soft and comfortable lining• `Top Grip‘ rubber for non-slip grip• extra small, small, medium, large, extra large and

extra extra large

466 halF-cover glove

• redesigned to be anatomically perfect• for shooters preferring to feel the rifle

or not use a full-cover glove• ideal for warm or hot conditions• maximum I.S.S.F. width elasticated wrist• dark blue leather• extra small, small, medium, large,

extra large and extra extra large

• best quality leather gives great comfort and extremely long life

• air holes aid comfort through long disciplines and also in hot conditions

• cut and shaped to your hand when in position with your rifle

• maximum elastication around the wrist to I.S.S.F. standard

outer material: 100% leather,rubberinner material: 34% wool, 33% cellulose, 33% polyester

outer material: 100% leather,`Top-Grip´ rubberinner material: 34% wool, 33% cellulose, 33% polyester

all gloves are available For right- or leFt-hand shooter

gehmann gloves

The reason we strive so hard to produce a glove that is both anatomically perfect for the hand and promotes confidence in the shooter is the same as all other Gehmann products - a continual search for overall perfection as a whole.

In the spectrum of the shooter‘s needs it is imperative the glove forms a pivotal part and contributes to the total picture - not just a single item on its own.

Top scores are only achieved with modern equipment designed at the outset to eliminate any chance of movement, shot after shot.

If evidence is needed just take a look at any shooter near you wearing a smooth, worn-out 10-year old glove and ask what chance they have?

Eliminating movement in all your equipment is the name of the game - so try to see the big picture and make sure you give yourself a hand when next using a rifle - treat yourself to a new Gehmann glove. This may be one of the cheapest and most productive items you buy...

gloves

page 57

468 5 Finger glove

• finest cowhide leather and our top glove• precisely tailored, cut and shaped for the hand

when supporting the rifle• maximum I.S.S.F. width elasticated wrist• large expanses of `Top Grip´ rubber• attractive finish in black and white• extra small, small, medium, large, extra large and

extra extra large

461 5 Finger glove

• best quality leather• pimple rubber across the palm and back provide perfect

stability• comfortable padded internally• maximum I.S.S.F. width elasticated wrist• anthracite green, black and white• small, medium, large, extra large and extra extra large

465 Fingerless glove

• a full rubber glove with micro-mesh breathable supple panels at critical joint positions

• ideal for shooters wishing to not have a fully covered hand or those in warmer climates

• attractive red contour line on back• soft comfortable padding• maximum I.S.S.F. width elasticated wrist• extra small, small, medium, large and extra large

460 5 Finger glove

• primarily `Amara`- a soft but non-rip material with excellent strength and breathable properties

• super internal padding for comfort• anatomically cut for perfect fit• maximum I.S.S.F. width elasticated wrist• first and second finger web gives

added support for all disciplines• black and white• extra small, small, medium, large and

extra large

outer material: 100% leather,`Top-Grip´ rubberinner material: 34% wool, 33% cellulose, 33% polyester

outer material: 100% leather,rubberinner material: 34% wool, 33% cellulose, 33% polyester

outer material: 80% Amara,20% artificial leatherrubberinner material: 34% wool, 33% cellulose, 33% polyester

outer material: 80% fome mesh,20% artificial leatherrubberinner material: 34% wool, 33% cellulose, 33% polyester

all gloves are available For right- or leFt-hand shooter

gloves

page 58

464 5 Finger glove

• artificial leather and attractive blue micro-mesh material but primarily rubber covered

• attractive blue and black combination• non-slip rubber for maximum security• maximum I.S.S.F. width elasticated wrist• extra small, small, medium, large and extra large

462 slim-line padded glove

• a very lightweight glove with an exposed thumb and special pads for shooters prefering less glove around their hand

• provides excellent contact with your weapon• maximum I.S.S.F. width elasticated wrist• extra small, small, medium, large and extra large

463 Featherweight trigger hand glove

• exclusively for the trigger hand and designed to maintain warmth in very cold conditions but also to assist your grip in hot conditions when there is a chance of perspiration

• secure grip is achieved by a small pad in the palm• extra small, small, medium, large and extra large

SPECIAL ATTENTION IS CALLED TO ORDERING AS THIS GLOVE IS UNIQUE - YOU MUST SPECIFY WHICH HAND IT IS TO FIT !!!

470 Fingerless glove

• anatomically cut for perfect fit• ideal for shooters wishing not to have a fully covered

hand or those in warmer climates• soft comfortable padding• light grey, black and white• maximum I.S.S.F. width elasticated wrist• extra small, small, medium, large, extra large

all gloves are available For right- or leFt-hand shooter

outer material: 80% fome mesh 20% artificial leather,rubberinner material: 34% wool, 33% cellulose, 33% polyester

outer material: 60% artificial leather,40% Amararubberinner material: 34% wool, 33% viscose, 33% polyacryl

65% leather,15% Amara, 10% cotton, 10% nylon,rubber

65% Amara,15% neoprene, 10% cotton, 10% nylon

gloves

page 59

3½ 4 4½ 5 5½ 6 6½ 7 7½ 8 8½ 9 9½ 10 10½ 11 11½ 12 12½ 1336 36⅔ 37⅓ 38 38⅔ 39⅓ 40 40⅔ 41⅓ 42 42⅔ 43⅓ 44 44⅔ 45⅓ 46 46⅔ 47⅓ 48 48⅔

• rear velcro fastening with two easy straps

new rigid flatter sole-bed

482 leather shooting boots

• best quality thick leather toecap and ankle supports with the supple suede upper foot panel give an extremely long service life with the added benefit of an attractive finish

• designed to minimize torque - the problem that allows the ankle to twist over the foot and spoil shots• anatomically cut for most stable support and comfort when shooting all disciplines• constructed over a rigid foot-bed ensures maximum support at the sole• twin velcro heel strap fastening• standard lacing with a ratcheting clip-over instep fastener• blue and black• 3 1/2 to 13

• over the instep ratchet provides easy-to-use fastening with quick release

• flat-bed sole to ensure absolute stability

building From a solid baseThe importance of eliminating as much movement as possible during shooting is well understood. What seems really quite remarkable, is shooters recognize this and take trouble to equip themselves with many close-fitting items of clothing but entirely forget about one of the weakest areas of body control - the ankles. Rigid ankle support is a must if other positional control areas are to benefit.

Obviously this is essential for standing and kneeling disciplines but many shooters are guilty of under-estimating the importance of solid shooting boots for prone disciplines.

484 micro-mesh lightweight boots

• mainly black and grey with large breathable mesh panels and a soft, comfortable inner lining

• standard front lacing but double velcro-closure straps at rear • micro-mesh material designed to provide maximum comfort• whole sizes only from 37 to 48 - refer to our size table

nearly seamless junction between sole and shoe

• four fast-loops for quick lacing

putting your best Foot Forward

u.K./continental

boots

page 60

481 leather shooting boots

• heavy suede outers in a deep purple and grey• front lacing and twin velcro heel fastening• anatomical footbed• 3 1/2 to 13

490 & 492 leather Kneeling rolls

• uses best quality leathers • an end zip for filling and a leather carry handle • blue, black, red or green• 492 is as 490 but ready filled with cork chips

491 & 493 vistram rolls

• as 490 but a synthetic material• hard wearing• black only• 493 as 491, but ready filled with cork chips

494 & 495 leather Kneeling rolls

• similar in all respects to 490 but with elongated rubber strips around the roll

• turquoise, lilac and black• 495 as 494 but ready filled with cork chips cork filling

483 pistol shoes

• thick leather with suede overlay and soft ankle pad• anatomical footbed• black, blue trim and red piping• 3 1/2 to 13

489 shoe tree

• an adjustable footplate to maintain sole flatness• simple toe and heel clip holds the item in position• is easily adjusted and set

boots

page 61

latest non-stretch material for long-life and consistent position when used

stable buckles

micro-adjustable universal joint gives precise length and unobstructed use

set for circumference with lock screws

non-slip inside cuff with cut-out for our hook

431 micro-adjustable sling with universal joint

• manufactured from artificial non-stretch material• two separate sections - round arm and to rifle • sections are coupled through a threaded universal joint giving micrometrical length adjustment and full articulation• the threaded adjuster is easily accessible when shooting• the cuff can be tailored to the size of your upper arm with two lock-screws on the inside which pass through the sling - and a buckle on

the outside• a cut-out on the cuff of the sling accepts the 439 hook attached to our jackets (this item is available as a spare)• special rubber inside the cuff eliminates creep around the arm

436 artiFicial sling - green

• manufactured from composite nylons• two separate sections - round arm and to rifle• the cuff can be tailored to the size of your upper arm with two lock-screws

on the inside which pass through the sling - and a buckle on the outside

436.b artiFicial sling - blue

Keeping it together

slings

page 62

435.b micro-adjustable artiFicial sling - blue

• manufactured from composite nylons• micro-adjuster for precise length from arm to rifle• micrometrical length adjustment is easily accessible when shooting• the cuff can be tailored to the size of your upper arm with two lock-screws

on the inside which pass through the sling - and a buckle on the outside

435 micro-adjustable artiFicial sling - green

• micro-adjuster for precise length from arm to rifle• manufactured from composite nylons• micrometrical length adjustment is

easily accessible when shooting• cuff adjustable as 431

437 pulse-Free micro-adjustable

• completely free inside upper arm contact eliminates any possibility of creating unwanted pulse on the rifle• adjustable round-the-arm cuff• inside and outside cuff swivel attachment points enable any angle of sling to cuff• sling can be detached from the swivels if required• micro-adjustable for length of sling from cuff to rifle• pre-set length is achieved previously in the normal way• non-stretch• universal for right- and left-hand shooters

slings

page 63

430 leather sling

• best quality leather with non-slip rubber inside cuff• stepped sizing round the cuff with loop for overlap• double prong buckle for length of sling

from shoulder to rifle

432 artiFicial sling

• designed as 430 but made of artificial non-stretch material• great value for money• this sling offers the opportunity of non-stretch positional security and

long service life by use of the very latest manufactured materials

438 40 mm sling claw - i.s.s.F.439 coat hooK

• can be attached on any jacket sleeve • provides a consistent sling position

433 junior leather sling

• as above, for juniors and ladies

slings

page 64

TECHNICAL SPECIFICATION

GEHMANN GP-1

calibre 4.5 mm/.177

length 415 mm

height 190 mm

width 49 mm

weight 930 grms

barrel length 240 mm

sight length 335-380 mm

trigger mechanical

• compensator• precision steel barrel

• walnut rake-adjustable anatomical grip

• alloy frame assists balance

• rearsight adjustable for height, width and blade cut-out

• movable foresight blade

• detachable cylinder with gauge

• fully adjustable trigger

g.100 gehmann gp-1

• the first match air pistol designed exclusively for Gehmann• easy operation top load lever suitable for left- or right-hand shooter• easy-load pellet feed • detachable cylinder with end gauge• fully adjustable heavily stippled anatomical walnut grip with good over-the-hand backstrap;

rake-adjustable for angle and bent• trigger mechanism adjustable in all senses• dry-fire mechanism• rearsight adjustable for elevation, width and the blade cut-out • muzzle compensator to eliminate flip and recoil• foresight blades interchangeable• 4.5mm foresight fitted standard - options are: 3.5, 4.0, 5.0 + 5.5mm (extra)• cased with charging adaptor, all necessary tools, full instructions and pellet test group

g.130 gp-1 stainless counterweight rod with moveable weight

• easily screwed to trigger guard• 60grms weight

gehmann gp-1 match air pistol

morini

page 65

gehmann pistol

page 65

m2400 morini 162.ea

• can any pistol be better... winning medal after medal!• uses natural air avoiding any temperature and pressure problems • cylinder pressure gauge for peace of mind• cylinders provide approximately 160 shots when charged to 200-bar• unique low-pressure lock hooks into the load-lever in the event of a pressure failure

during shooting• the electronic trigger live- and dry-fire operation are unique in that both feel

identical to the finger, pulling the trigger merely closing a switch, so there is no interlink to give a false practice sensation

• twin AAA batteries give 15,000 shots• on/off switch and auto shut-down if accidently left switched on• pulse red light indicates battery condition is satisfactory• Lothar Walther precision barrel for the ultimate in accuracy• Morini’s own anatomical adjustable wooden grips - right- or left-hand• muzzle compensator eliminates barrel flip and recoil• 5.0mm foresight fitted standard - 4.0, 4.5, 5.5 and 6.0 mm available (extra)• matt black body, blued steel barrel with two different colour cylinders• in a rigid padded case profiled for pistol and the factory supplied accessories with

provision for match pellets and a scoring gauge• with brass charging adaptor (DIN, 200-bar thread), air discharge tool,

all tools for stripping, full instructions, pellet test group and guarantee

m2500 morini 162.ea-short

• as the 162.EA but with shorter barrel and cylinders• only 960 grms weight• 200-bar operating pressure gives 140 shots• for ladies and juniors or those with weaker wrists

TECHNICAL SPECIFICATION

MOrINI 162.EA + TITANIuM 162.EA-SHOrT

calibre 4.5 mm/.177 4.5 mm/.177

length 410 mm 370 mm

height 140 mm 140 mm

width 50 mm 50 mm

weight 1040 grms 960 grms

barrel length 240 mm 190 mm

sight radius 310-360 mm 300-350 mm

trigger electronic electronic

• Lothar Walther precision barrel for the best accuracy

• trigger can be adjusted for first and second stage, weight and length of travel and the blade can easily be positioned for reach

• detachable and interchangeable cylinders with end gauge are easily filled and fitted - adaptor supplied

• electronic mechanism has battery condition pulse light and auto shut-down if unused

• muzzle compensator eliminates barrel flip and dampens recoil

• Morini anatomical grips are manufactured in many sizes and ensure perfect feel

morini - the olympic champions´ choice

morini

page 66

M260

M281

M261

M262

M263

TECHNICAL SPECIFICATION

MOrINI CM162.M CM162.M-SHOrT

calibre 4,5 mm/.177 4,5 mm/.177

length 410 mm 370 mm

height 140 mm 140 mm

width 50 mm 50 mm

weight 1020 grms 940 grms

barrel length 240 mm 190 mm

sight radius 310-360 mm 300-350 mm

trigger mechanic mechanic

m2600 morini 162.m-short

• as 162.M with shorter barrel and cylinder• only 940 grms weight• 200-bar operating pressure gives 140 shots• for ladies and juniors or shooters with weaker wrists

m2300 morini 162.m

• design per the 162.EA but with a mechanical trigger• with one detachable cylinder, others available at extra cost• cylinder fitted with pressure gauge• low-pressure lock to load-gate lever ensures security of shots• cased - for equipment specification see 162.EA details

m260 60 grm barrel weight

• attaches to the 162 barrels• clamps on with two outer moveable bars• four weights can then be slid along the bars to suit

m261 60 grm cylinder weight

• clamps to the cylinder boss • single bar with two moveable weights

m262 80 grm cylinder weight

• two bars with two moveable weights

m263 60 grm weight set

• set of 4 x 15grm weights for sliding down the barrel

• position to your preference

m281 compensator

• for all 162 models

m2100 morini 162.ea-titanium

• as M2400, but frame, compensator and both cylinders in a stylish titanium finish

morini accessories

morini

page 67

TECHNICAL SPECIFICATION

MOrINI 22.M + 22.M-RF 22.M-Alu+Alu-RF

calibre .22 lr .22 lr

length 300 mm 300 mm

height 140 mm 140 mm

width 50 mm 50 mm

weight 1210 grms 950 grms

barrel length 130 mm 130 mm

sight radius 220 mm 220 mm

trigger mechanic mechanic

m2800 morini 22.m .22 lr standard pistol

• a matching family of Standard pistols with revolutionary features• uses direct bullet-feed from magazine to breach rather than between magazine lips

which can cause rim or bullet-nose damage, misfeeds and subsequent jams• hammer spring tension adjustable by the shooter• can easily be regulated for velocity of any ammunition• lowest sight line of current production small-bore Standard pistols• rearsight has adjustments for elevation, windage and the blade cut-out width• complete disassembly made easy by use of only two main screws - one through the

grip and one for the frame• manufactured in steel and alloy only - no artificial materials which may cause wear

or malfunction problems over time• full range of adjustable walnut grip options available• supplied in a rigid carry case• conversion kit for .32 is not available for this dedicated .22 design

m251 set oF 3 x 40 grms barrel weights

• for M2800, M2800-ALU + M2850RF

m2800-alu morini 22.m-alu .22 lr standard pistol

• as M2800, but mainly constructed of alloy with a steel barrel for lightness and balance

• weight unloaded is only 950grms

m2850rF - rapid Fire

• as M2800, but modified for rapid fire

morini

page 68

M271

M271-L

M273

585-Fp universal barrel spirit level

• a first for free pistol and long-arm barrels• can be positioned along the bar as required• level is radially adjustable for cant - a friction collar

holds your setting without need of more tools• quick acquisition of bubble picture• slow bubble• clamps to barrels of 14 - 18mm diameter• special material elimates

marks on barrels• suitable for

right- or left-hand shooters• lightweight

m2700 morini 84.e .22 lr Free pistol

• electronic mechanism gives minimum lock-time from trigger release to fire• ball and socket pivotal points provide friction-free action• accidental discharge due to the light trigger is guarded by a light beam sensor

spanning the trigger guard. Not until the finger is correctly positioned to the trigger will this circuit close opening that of the trigger

• trigger pressure is variable: factory set at 0-22 grms - but the pistol comes with two other pressure springs giving 22-160 grms and 160-300 grms

• dry-fire possible• battery life gives approximately 5,000 shots• Morini wrap-around anatomical grip: right- or left-hand, is factory fitted• Lothar Walther precision barrel• micro adjustable rearsight • muzzle compensators M.271 or M.271-L available (extra)• standard with 5.0mm foresight - options are: 3.5, 4.0, 4.5, 5.5 + 6.0mm (extra)• in a rigid case with instructions, tools, cleaning rod and guarantee

• adjustable trigger

m273 barrel weight - 70 grms

m271 compensator

m271-l long compensator

• movable foresight blade

• factory wrap-around grip

m2700-l morini 84.e-light

• as 84.E, but 100grms less weight

TECHNICAL SPECIFICATION

MOrINI 84.E 84.E-L

calibre .22 lr .22 lr

length 495 mm 495 mm

height 150 mm 150 mm

width 70 mm 70 mm

weight 1240 grms 1140 grms

barrel length 290 mm 290 mm

sight radius 331-426 mm 331-426 mm

trigger electronic electronic

• Lothar Walther barrel for highest precision

accessories

morini

page 69

manufacturer: models:

Colt Government and PythonFAS 601, 602, 603, 604, 606, 607, 609 and Gehmann F4000Feinwerkbau 65, 80, 90, 2, 100, 102, 103, C.5, C.10, C.20, C.25, C.55, P.30, P.34, P.40 + Basic, P.44, P.55, P.56 + P.58Hämmerli 150, 152, FP60, 208, 220, 232, 240, 260, 280, SP.20 .22 l. r., 480, 480.K and 480.K2Morini 84.E, 102.E, 162.E, 162.EA + -Titanium + -SHORT, 162.M + -SHORT, 22.M + -RF + -ALU and 32.MSako 22-32, Triace and Triace ShortSteyr Match LP.1, LP.2, Match LP.5, Match LP.1-P, LP.10, Match LP.5-P, LP.50-P and Match FPSmith & Wesson H.B.41, K.14-19-66, 686-586, K+L frames and M.52TOZ TOZ 35Unique DES/69 .22 lr, DES/69-U, DES/2000-U-22 short and DES/32-U .32Walther CP.1, CP.2, CP.2 Match, CP.3, CP.3 Match, CPM Atlanta, CPM.1, LPM.1, LP.200, CP.200, LP.201, CP.201, GSP-Expert .22 lr LB + Expert, GSP .32 S&W, KSP.200, OSP and OSP.2000

others Anschütz LP@, Beretta 89, 92 + 98, Erma ESP, High Standard Military C., IJ.35, Korth Revolver, Manurhin MR73, Olympic .22 lr, Pardini K2, K60, K90, SP, HP, MP, Ruger MKII and SIG P210

m295 morini compound 125ml

• compound and hardener providing a perfect hand to pistol grip shape - easy to apply and simple to use

m296 morini compound 750ml

• bulk quantity for industrial use

r.120 röhm twinmaster - sport • pre-charged pistol with match length barrel• one pre-charged cylinder with gauge• under-barrel counterweights• muzzle compensator• grips in small + medium right-hand and medium left-hand• cased with charging adaptor, instructions, etc.

r.130 röhm twinmaster - match

• pre-charged pistol with match length barrel• one pre-charged cylinder with gauge• counterweight bar that rotates as a rest - muzzle compensator• anatomical adjustable wood grip - options as Sport (below)• cased with charging adaptor, instructions, tools, etc.

r.100 röhm twinmaster - top

• cheap pre-charged pistol with 8-shot or single-shot magazines• one pre-charged air cylinder and gauge• grips in small and medium right-hand and medium left-hand• cased with charging adaptor, etc.

r.125 röhm twinmaster - trainer

• designed as a training weapon with more realistic feel of a full-sized gun• 8-shot magazine• better two-stage trigger• grip options as Top (above)• CO² operation

r.107 röhm twinmaster - allrounder

• the cheapest pre-charged pistol on the market!• ambidextrous grip suitable for all shooters• ideal for junior, lady or club beginners• enables pre-charged recoil-less shooting at a rock-bottom price• single pre-charged air cylinder with gauge• cased with charging adaptor, tools etc.

morini anatomical grips

morini + röhm

page 70

TECHNICAL SPECIFICATION

Match-Guns MG.1E

calibre 4.5 mm/.177

length 420 mm

height 200 mm

width 50 mm

weight 980 - 1.100 grms

barrel length 240 mm

sight radius 305 - 330 - 365 mm

dead travel up to 480 grms

release force 30 grms

trigger electronic

mg.100e mg.1e match air pistol

• the electronic trigger mechanism with dry-fire capability has a superb quick release force travel

• 12V - A23 battery give more than 4,000 shots• rake-adjustable (fully adjustable in all directions) anatomical walnut grip in

different sizes for right- or left-hand shooter• twin adjustable counterweight bars (carbon fibre) with moveable weights for

perfect balance • two cylinders with end gauge• rearsight has adjustments for elevation, windage and the blade cut-out width• muzzle compensator eliminates barrel flip and recoil• the selected barrel is tested to assure the best precision on the rest• the foresight blade can be positioned in different distances to the rearsight• 4.5mm foresight fitted standard - options are: 3.5, 4.0, 5.0 and 5.5mm (extra) • supplied in a rigid padded case profiled for pistol and the factory supplied

accessories with brass charging adaptor (DIN, 200-bar thread), all neccessary tools, full instructions, pellet test group and guarantee

• fully adjustable anatomical walnut grip

• trigger blade adjustable for reach and angle

• selected steel precision barrel • compensator

• twin detachable cylinders with gauge

• adjustable counterweight rods with moveable weights

• micro adjustable rearsight

innovative design combined with perFect balance

morini

page 71

match guns

page 71

mg.220e mg.2e electronic standard pistol

• as MG.200 left, but incorporating an electronic trigger with a dry-fire capability

• uses an A23 12-volt battery (supplied)

mg.270 conversion

• enables MG.2 and MG.2E to be converted to rapid-fire

mg.240 mg.2 rapid-Fire pistol

• mechanical trigger• heavy barrel weight and superb recoil damping maintain

pistol stability in the hand throughout the course of fire• uses a lighter slide, heavier foresight base and has four

recoil dampers to produce the smoothest action when fired

• low sight to barrel line gives the shooter excellent recovery

• rear- and foresight options as MG.2 above• in a rigid case with spare magazin, instructions, tools...

mg.200 mg.2 .22lr standard pistol

Match Guns assemble their pistols in a dust-free environmentaly clean room to ensure as perfect a product as possible prior to entry - to service with you. The trigger design is by Cesare Morini whose reputation in the precision target pistol shooting world is already legendary. This model incorporates the unique characteristic of an under-barrel tubular magazine manufactured from a carbon fibre mix to ensure a slow but steady micrometrical shift in centre of gravity as rounds are used whilst maintaining minimal weight in the overall pistol`s design.

• mechanical trigger by Cesare Morini• harmonised hammer and recoil action through the hand• under-barrel 5-shot tubular magazine• rake-adjustable anatomical grip compatible with and suitable for

models MG.2E, MG.2+E rapid-fire, MG.4 and MG.1E• side muzzle weights are available in alloy or steel• rearsight adjustable for elevation, windage and blade cut-out• foresight sizes: 3.0, 4.0 + 4.5mm (3.5mm standard)• in a rigid case with instructions, tools, spare magazin, etc.

mg.250e mg.2e electronic rapid-Fire pistol

• as MG.240 but with a superb electronic trigger• 12V - A23 battery give more than 4,000 shots

TECHNICAL SPECIFICATIONMatch-Guns MG.2 MG.2E MG.2E RF MG.2E RFcalibre .22 lr .22 lr .22 lr .22 lrlength 300 mm 300 mm 300 mm 300 mmheight 140 mm 140 mm 140 mm 140 mmwidth 50 mm 50 mm 50 mm 50 mmweight 880-1150 grms 915-1185 grms 970-1160 grms 1005-1195 grmsbarrel length 152 mm 152 mm 152 mm 152 mmtrigger mechanic electronic mechanic electronic

morini

page 72

match guns

page 72

mg.500m mg.5 Free pistol

• mechanical trigger (convertable to electronic) with a dry-fire / ready-to-fire selection lever

• four counterweight bars with moveable weights provide perfect balance in the hand

• steel and alloy frame combination gives rigidity with minimal weight

• in all directions fully adjustable wrap-around walnut grip

• rearsight adjustments for elevation, windage and blade cut-out width

• muzzle compensator eliminates barrel flip • 4.5mm foresight fitted standard - 3.5, 4.0, 5.0 and 5.5mm

also available - extra• selected barrel for best precision • rigid case with instructions, tools, cleaning rod, etc.

mg.550e mg.5e electronic Free pistol

• as MG.500M left, but with electronic trigger including a dry-fire capability

• 12V - A23 battery give more than 4,000 shots

mg.280 mg.4 .32 s&w long

• designed to match the MG.2 .22 lr. version• bullet extraction, hammer set and slide return are harmonised

to provide an absolutely minimal recoil action to the shooter`s hand and arm axis - this aids follow through

• foresight sizes: 3.0, 4.0 + 4.5mm (3.5mm standard)• in a rigid case with instructions, tools, spare magazin, etc.

match guns pistols are all available to suit either right- or leFt-hand shooters

and are manuFactured in diFFering grip size options

standard with all our pistols:rigid carry case with egg-box profile foam and cut-outs in the lower half for the pistol including all accessories

TECHNICAL SPECIFICATIONMatch Guns MG.5 MG.5E MG.4calibre .22 lr .22 lr .32 S&W Long WClength 490 mm 490 mm 300 mmheight 221 mm 221 mm 140 mmwidth 95 mm 95 mm 50 mmweight 1115 grms 1180 grms 950 - 1120 grmsbarrel length 290 mm 290 mm 152 mmsighting line 380-405-430 mm 380-405-430 mm 219 mmtrigger mechanic electronic mechanic

morini

page 73

match guns

page 73

s.730 steyr lp.50 5-shot rapid-Fire

• two cylinders with end gauge in silver, blue or gold - please specify!• improved magazine traverse • redesigned trigger• ported barrel reduces muzzle flip and improves follow-through• barrel shroud carries 10 grm counterweights along its length• grip options as S.750-S above• cased with charging adaptor, tools, etc.

s.730e steyr lp.50-e - electronic

• the well known 5-shot pistol is now also available with the new, superb electronic trigger system

• two cylinders with end gauge in silver, blue or gold - specify!• barrel shroud accepts counter weights and is ported to

reduce flip when fired• cased with charging adaptor, tools, etc.

s.750-s steyr lp.10 - silver

• two cylinders with end gauge in silver, blue or gold - specify!• barrel shroud ported for upper barrel vents which counteract muzzle flip and

aid with shot follow-through - shroud accepts sliding counterweights• new stabilising system ensures no recoil and best accuracy from shot to shot• larger load lever and dry-fire mechanism• adjustable right-hand walnut grips in sizes: XS, S, M, L + XL - or left-hand: S, M + L• adjustable rearsight and interchangeable foresights (extra) • cased with charging adaptor, tools and VFG cleaning felts, etc.

s.750e-s lp.10-e - electronic - silver

• one of the world`s best air pistols is now available with electronic trigger! • dry-fire mechanism and constant pressure release• twin 1,5V AAA standard batteries give 30,000 shots• multifunctional grip adjustment can be retained by the

flexible electronic system • otherwise as S.750-S above• supplied with two cylinders - colour options: silver, blue or gold

in a rigid case with charging adaptor, tools, etc.

s.750 steyr lp.10 - blacK

• as S.750-S, but black frame with two cylinders in colour choices as above

s.750e steyr lp.10-e - electronic - blacK

• as S.750E-S above, but black frame

other models available upon request

page 74

steyr

s.760 steyr lp.2

• for entry-level shooters seeking an affordable price pistol• single cylinder with gauge in silver, blue or gold - specify!• grip options as S.750-S • cased with charging adaptor, tools, etc.

s.729 steyr lg.110 - match

• available with one-piece or take-down stock - specify! silver alloy stock with fore-end rail for accessories

• it introduces the unique Steyr stabilizer system which eliminates recoil to zero

• adjustable butt, grip and cheek-piece• sleeve barrel weights can be moved to suit• silver cylinder with end gauge - blue available - specify!• detachable fully adjustable fore-end support• grip options: right-hand small, medium and large - left medium• cased with sights using a 22mm foresight, tools, etc.

s.720 steyr lg.110 - light

• lighter overall match air rifle version of the above - 4.3kgs • for juniors, ladies or men prefering less weight• fore-end rail accepts all standard rail accessories• cylinder options as S.729 above• includes sights using a 22mm foresight• cased with charging adaptor, tools, etc.

s.762 steyr lp.2 - compact

• as above but shorter and lighter overall for ladies and juniors or those with weaker wrists having difficulty holding aim using a standard version

• grip options as above or with lighter ambidextrous grip

s.715 steyr lg.110 - Field target

• silver alloy stock with adjustable butt, cheekpiece, fore-end and grip• user-friendly sidelever cocking action does not interfere with your

riflescope or its mounts - grip and cylinder options as S.729• easily converted to a match rifle by the additional purchase of the

correct muzzle tube and target sight set• 7.5, 16 or 24 (F.A.C.) joule power outputs - please specify!• cased with charging adaptor, tools, etc.

s.717 steyr lg.110 - high power

• silver alloy stock - silver cylinder with gauge - blue available • sidelever cocking action does not interfere with your riflescope • composite cut-out stock incorporating an ambidextrous pistol grip• quick-fit stock attachment makes disassembly simple• 7.5, 16, or 24 (F.A.C.) joule power outputs - specify!• also available with black alloy stock for cal. 5.0mm and 5.5mm• cased with charging adaptor, tools, etc.

s.780 air pistol Kit

• a complete kit suitable for all Steyr air pistols - old or new• consisting of an efficient muzzle compensator which

eliminates barrel flip, a moveable barrel weight and two adjustable counterweight bars (alloy) with moveable weights for the perfect balance

page 75

steyr

F.610 FeinwerKbau 700-alu

• the latest alloy air rifle from Feinwerkbau is in matt black and silver and has a standard for-end rail • it introduces a new moveable sight base rail at front and rear for precise location of sight height • the fore-end support rotates to assist cant - includes sights using a M.22 foresight• the load gate lever is now stepped away for 'scoping if required• comes with the latest interior absorbing device for no impulse • grip position is fully adjustable as are all stock settings• also available colour options: blue/silver or red/silver

F.601 700 universal

• a less expensive laminated wood version with the successfull technical design of the 700 series

• single cylinder with end gauge • includes sights using a M.22 foresight• available right-hand or as a true left-hand rifle

F.604 700 basic

• ambidextrous beech stock with right-hand action• an economical way to begin top-level match shooting• detachable cylinder with gauge and charging adaptor• equipped with the brilliant inner absorber system• includes sights using a M.22 foresight

F.608 500

• ambidextrous beech stock with right-hand action• this model combines easy handling with proved

Feinwerkbau quality and precision at a favourable price

• detachable cylinder with gauge • includes sights using a M.18 foresight

F.622 700-alu evolution - ventilated alloy stocK

• a design concept introduced to meet customer demand for a match air rifle with more personal and individual appeal

• this range offers a choice of two colour designs matched on the air cylinder, pistol grip, cheekpiece and rearsight side panel

• lighter overall rifle version of the above (only 3.6kgs)• equipped with the latest absorber system • colours available: blue and bright red

page 76

FeinwerKbau

F.665 FeinwerKbau p58 5-shot rapid-Fire

• yet another improved version of their rapid-fire match air pistol with an improved action

• rake-adjustable Morini grip available in three sizes, right- or left-hand• trigger can be rotated and swivelled and is adjustable in length and height• with a 5-shot, single-shot and dry-fire practice magazine - cased

F.655 FeinwerKbau p.44

• the latest match air pistol with easier cocking and redesigned action body incorporating a sliding and canting rearsight and a fully adjustable trigger

• rake-adjustable anatomical grip available in three sizes, right- or left-hand • cased - over-barrel counterweight mount available extra

F.660 FeinwerKbau p.44-short

• also available as a SHORT version - 870grms only

F.630 FeinwerKbau aw.93 .22lr standard pistol

• classic standard pistol in nickel finish• right- and left-hand grips in small or large • barrel 152mm, overall length 285mm, weight 1140grms• supplied in rigid carry case• also available as a LIGHT version (locking piece made out of aluminium)

F.640 FeinwerKbau 2700 super match - 22mm diam. barrelF.642 FeinwerKbau 2700 super match - 24mm diam. barrel

• both models are available with either a blue alloy stock and a matching blue grip or a silver alloy stock with contrasting black grip and cheek-piece

• supplied with a fully adjustable fore-end block - fore-end rail accepts all standard rail accessories• grip, butt, hook and cheekpiece adjustable• handstop combined sling swivel• includes sights using a M.22 foresight• available as a true left-hand rifle

F.646 2700 universal

• with 22mm or 24mm diameter barrel - please specify!• laminated stock• fore-end rail accepts all standard rail accessories• butt and cheekpiece adjustable• with handstop combined swivel• includes sights• available as a true left-hand - please enquire

F.695 2700 super match - light

• also available as a LIGHT version with a reduced overall weight of only 5.1kgs - 22mm diameter barrel only

other models available upon request

page 77

FeinwerKbau

w.1341 walther lg.300-xt anatomic

• the stock is made from a single piece of laminated wood, offering the adjustment options of an aluminium stock - rake-adjustable (fully adjustable in all directions) 3D-grip

• 300-bar cylinder and gauge with both 200- and 300-bar charging adaptors• adjustable alloy butt plate and sight elevation • available right-hand or as a true left-hand rifle - with sights - cased

W.1370 Vision Universal: ambidextrous alloy stock and basic target rearsightW.1371 Vision Plus: ambidextrous alloy stock and standard target rearsightW.1375 Vision Junior: shorter ambidextrous stock and basic rearsight

w.1241 lp300 ultra

• reduced in overall weight for juniors or ladies - 850grms• 300-bar shorter cylinder without gauge but with 200- and 300-bar

charging adaptors• 3-D anatomical grip in two sizes for right-hand shooter • cased

w.1246 walther lp.300-xt

• with redesigned cocking action, new absorber system "XT", compensator and three large gas ports in the barrel for a minimised barrel flip

• ProTouch 3-D anatomical grip in three sizes for right-hand shooter available with left-hand grip in medium only

• 300-bar cylinder with 200- and 300-bar charging adaptors - cased

w.1249 walther lp.300-xt 5d

• as above but with the latest ProTouch 5D anatomical grip which offers the following advantages: - adjustable also in the width for enhanced volume - the small alloy plate allows an individually setting by fine adjustment of three different positioned screws

• available in medium size for right-hand shooter only

w.1331 walther lg.300-xt alutec

• attractive blue alloy stock with a wide range of settings• fully adjustable 3D-grip• comes with the latest "XT" anti-vibration system, including

the new absorber and a modified pressure reducer • 300-bar cylinder with 200- + 300-bar charging adaptors• includes sights - cased

w.1343 lg.300-xt alutec protouch

• alloy stock with non-slip areas and rake-adjustable black grip• equipped with MEC Contact III butt assembly, adjustable

fore-end and cheek piece, high sight base set, a stylish carbon fibre barrel jacket and new "XT" absorber system

• 300-bar cylinder and gauge with both 200- and 300-bar charging adaptors

• with sights - cased

w.1370 lg.30 vision concept...

• alloy fore-end with five artistic colour design options• fore-end rail accepts all standard rail accessories• ambidextrous cheek piece but reversible grip• 300-bar cylinder with 200- and 300-bar charging

adaptors - cylinder with gauge - includes sights

page 78

walther

79

w.1280 walther KK.300 anatomic

• blue laminated wood stock, blue grip, blue cheek-piece, etc.• MEC Free Position butt and handstop with sling swivel• fore-end rail accepts all standard rail accessories• anatomically adjustable throughout• includes sights• also available left-hand (right-hand rearsight) and as a LIGHT version with

a reduced overall weight of 5.9kgs • cased to carry rifle with sights fitted

w.1200 gsp expert .22lr standard pistol

• continuing a long family of standard pistols• distinctive weight forward design to set the wrist• 1000grms match two-stage trigger• trigger can be changed for the 1360grm version• rearsight position over the wrist for accuracy• moveable barrel weights (2x17grms) compensate recoil • three right-hand grips but left-hand medium only• cased with spare magazin, etc.

w.1289 walther KK.300 alutec

• blue alloy stock with laminated grip, cheek-piece and fore-end, etc.• new completely revised trigger - weight adjustment from 50 - 130grms• includes sights, MEC Free Position butt and handstop with sling swivel• excellent value for money and suits beginners or clubs• available left-hand (right-hand rearsight)• in rigid case large enough to allow sights fitted

w.1251 ssp .22lr standard pistol

• all new design with improved balance• weight-forward style to set wrist• a pneumatic damping system provides a smooth release of the shot• 1000grm or 1360grm trigger options• three right-hand 3-D anatomical grips but left-hand medium only• cased with spare magazine, etc.

w.1206 gsp expert .32 s&w long

• as above, however a .32 S & W long centre-fire version• cased with spare magazin, etc.

w.1216 + w.1218 gsp conversion Kits

• for all shooters wishing to have one gun, but two calibers - easy to change W.1216 conversion kit in caliber .22lr W.1218 conversion kit in caliber .32 S & W long

other models available upon request

page 79

walther

a.1407 1913 with stocK 2213 alu

• 690mm barrel and action combined with an alloy stock 2213 giving all possible anatomical adjustments

• grip, butt, cheek-piece and fore-end adjustments• fore-end rail accepts all standard rail accessories• delivered with handstop, fore-end raiser block, etc.• available left-hand - sights extra

a.1414 1907 with stocK 1918 alu precise

• one of the favorite small bore rifles because of its fine adjustable match-trigger in combination with the extreme short locktime

• new alloy stock with ventilation holes to promote a more stable barrel temperature

• fully adjustable grip, cheek-piece and butt plate• fore-end rail accepts all standard rail accessories• cased with handstop, fore-end raiser, etc. - sights extra

a.1464 anschütz 2013/690 with stocK 2018 alu precise

• as above, but this new alloy stock rifle has a slimmer and more rounded fore-end suitable for a wider range of shooters • ventilation holes promote a more stable barrel temperature through the course of fire • dynamic and harmonic research produced a wedge-shaped recoil damping system which has produced greatly

improved vibration levels with the result that there is a vast improvement in increase in bullet group consistency • the cheek-piece profile has been changed and its method of adjustment and clamping improved with much

larger knobs - eliminating the need for tools - cased - excludes sights

a.1455 8002 s2 silver alloy stocK and blacK grip, etc

• alloy stock with grip, butt, cheek-piece and fore-end adjustments• fore-end rail accepts all standard rail accessories• new trigger mechanism• cylindrical match barrel for best shooting performance • detachable cylinder with gauge for 250+ shots• with charging adaptor, tools etc.• includes 6834 sight set• available left-hand and also available in a sliver stock with

laminated blue grip

a.1421 & a.1423 8001 club & junior

• multi-colour Junior and plain walnut Club models • fore-end rail accepts all standard rail accessories• adjustable butt and cheek-piece• detachable cylinder with gauge (long - Club) & (short - Junior) • excellent beginners rifle for smaller shooters or clubs• includes 6834 sight set

a.1462 anschütz 2013/690 with stocK 2013 alu

• with heavier 690mm barrel and a four bolt tie-down stainless receiver• perfectly styled alloy stock with fully adjustable butt plate, cheek-piece and rail for handstop etc. • comes with handstop, fore-end raiser block, screw driver etc - sights extra• a true left-hand version is available and left-hand sights are extra

other models available upon request

page 80

anschütz

e.100 edge airgun

• give yourself the EDGE with this new entry level target rifle • this lightweight pre-charged target rifle has the look and feel of a top range expensive precision

match air rifle but at a realistically, affordable price for clubs or the first time target shooter• ambidextrous stock with pistol grip and ambidextrous cocking knob ensures an easy handling for

both right- and left-hand shooter - adjustable length of pull let the rifle easy grow if needed• the unique features include an adjustable cheek piece and fore-end for better fit,

a match grade barrel (Lothar Walther) for best precision, etc. • recoil free Gunpower pre-charged system with a secure dry-fire mechanism if wanted • includes sights using a M.22 foresight

• E.100 blue anodised alloy stock• E.100-r red anodised alloy stock

TECHNICAL SPECIFICATION

E.100 EDGE Airgun

calibre 4.5 mm / .177

length 91 - 106cms

barrel Lothar Walther

velocity 165-175 meters per second

weight 3.000 grms

number of shots per fill 100

length of pull adjustment 15 cms

trigger 0.68 kg / mechanic

sp20 rrs h.1051 in .22lr h.1053 in .32 s&w long

• a new action with improved balance• receiver with adjustable buffer system• improved recoil damping for better follow-through• calibre conversion kits available• three right-hand grips, but medium left only

h.1040 hämmerli ap.40 balance

• low-vibration compressed-air system• ported barrel to prevent barrel flip• ambidextrous loading• grip and trigger adjustable in all three axes settings• front sight in three widths• dry-fire trigger• aluminium cylinder with gauge• cased with filler and tool• Junior version - H.1042

h.1061 x-esse .22 lr. sport pistol

• barrel length 150mm• all steel construction• 10-shot magazine• 11mm top rail for pistol `scope• cased with cleaning kit and second magazine• available as H.1060.LS X-esse long - 150mm barrel• available as H.1060 X-esse short - 115mm barrel

other models available upon request

page 81

edge + hämmerli

Fx.1000 typhoon

• a lightweight single-shot rifle with only a few moving parts that settles for many years of trouble free shooting

• in either synthetic for right-hand (FX.1000) or walnut ambidextrous stock (FX.1002) for right- or left-hand shooters

• bolt action with safety - recoil free

Fx.1012 t12

• based on the single-shot Typhoon action but modified so you can fit the new 12-shot magazine found on the Revolution

• available in synthetic right-hand (FX.1012) or walnut ambidextrous stock (FX.1212) for right- or left-hand shooters

• bolt action - recoil free

cocking system bolt action

magazine type12-shot - cal. 5.5mm / .22 - removable 16-shot - cal. 4.5mm / .177 - removable

stock1. synthetic or 2. walnut - ambidextrous with adjustable recoil pad

calibre5.5mm / .22 or4.5mm / .177

barrelmatch grade (Lothar Walther) choked, free floating, length: 500mm

weight synthetic stock: 2.2kgs walnut stock: 2.7kgs

power settings: 7.5 - 36 joules

cocking system bolt action

magazine type single shot - no magazine

stock1. synthetic or2. walnut - ambidextrous with adjustable recoil rubber pad

calibre5.5mm / .22 or 4.5mm / .177

barrelmatch grade (Lothar Walther) choked, free floating, length: 500mm

weight synthetic stock: 2.2kgs walnut stock: 2.7kgs

power settings: 7.5 - 36 joules

above rifles sold with filling probe and user manual - excluding riflescope

page 82

Fx airguns

Fx.5100 cyclone

• this rifle has a straight pull cocking system with the possibility to use the thumb for the return of the cocking lever

• ambidextrous (left / right) stocks available in synthetic (FX.5100) or walnut (FX.5102) also offered in a thumb-hole walnut version (FX.5104)

• the synthetic stock has built in soft, special rubber material for best grip

• patented power adjuster that gives the rifle three different velocity settings

• recoil free

cocking system straight pull with thumb return

magazine type 8-shot magazine - removable

stock

1. synthetic - ambidextrous (left / right) with tactile inserts in the grip and rubber recoil pad

2. walnut - ambidextrous with rubber recoil pad 3. walnut - thumb-hole with adjustable recoil pad

calibre5.5mm / .22 or 4.5mm / .177

barrelmatch grade (Lothar Walther) choked, free floating length: 500mm

weightsynthetic stock: 2.6kgs walnut stock: 2.8kgs

power settings: 7.5 - 45 joules

cocking system bolt action

magazine type12-shot - cal. 5.5mm / .22 - removable 16-shot - cal. 4.5mm / .177 - removable

stock1. synthetic - thumb-hole with adjustable recoil pad or 2. walnut - thumb-hole with adjustable recoil pad

calibre5.5mm / .22 or 4.5mm / .177

barrelmatch grade (Lothar Walther) choked, length: 500mm

weight synthetic stock: 3.0kgs walnut stock: 3.3kgs

power settings: 7.5 - 36 joules

Fx.3700 t12 whisper

• based on the T12 with new 12-shot magazine, but offering a highly restrained noise level

• available in synthetic thumb-hole (FX.3700) or walnut thumb-hole stock (FX.3702)

• bolt action - recoil free

all rifles sold with filling probe, extra magazine and user manual - excluding riflescope

page 83

Fx airguns

cocking system straight pull with sprung return

magazine type 8-shot magazine - removable

stock1. synthetic - thumb-hole stock with adjustable recoil pad,

for-end accessory rail - magazine holder or2. walnut - thumb-hole stock with high adjustable recoil pad

calibre5.5mm / .22 or4.5mm / .177

barrelmatch grade (Lothar Walther) choked, free floating,length: 500mm

weight synthetic stock: 2.4kgs walnut stock: 2.8kgs

power settings: 7.5 - 45 joules

cocking system straight pull with sprung return

magazine type 8-shot magazine- removable

stock synthetic - ambidextrous with adjustable recoil pad

calibre5.5mm / .22 or4.5mm / .177

barrelmatch grade (Lothar Walther) choked, free floating,length: 500mm

weight 3.2kgs

power settings: 7.5 - 45 joules

Fx.6000 cutlas

• this rifle is equipped with a military style straight pull cocking system with auto return

• thumb-hole stocks available in synthetic (FX.6000) or walnut (FX.6002)

• the synthetic stock is designed for attachment of a bipod or lamp on a Waever-style rail and has a passage behind the trigger for up to three magazines

• patented power adjuster gives the rifle three different velocity settings

• recoil free

Fx.7000 gladiator

• this rifle holds an enormous amount of air ! the butt combined air cylinder is removable to make a neat package

• it also has the straight pull cocking system of the Cutlas above

• synthetic stock with finger-grooved pistol grip, adjustable air cylinder cover combined cheek piece

• patented power adjuster that gives the rifle three different velocity settings - recoil free

all rifles sold with filling probe, extra magazine and user manual - excluding riflescope

page 84

Fx airguns

cocking system semi automatic

magazine type 12-shot magazine - removable

stock synthetic - ambidextrous with adjustable rubber recoil pad

calibre 5.5mm / .22

barrelmatch grade (Lothar Walther) choked, length: 500mm

weight 3.6kgs

power setting: 40 joules

cocking system semi automatic

magazine type12-shot - cal. 5.5mm / .22 - removable 16-shot - cal. 4.5mm / .177 - removable

stock1. synthetic - thumb-hole with adjustable recoil pad or2. walnut - thumb-hole with adjustable recoil pad

calibre5.5mm / .22 or4.5mm / .177

barrelmatch grade (Lothar Walther) choked, length: 500mm

weight synthetic stock: 3.1kgswalnut stock: 3.4kgs

power settings: 27 - 35 joules

Fx.8000-22 revolution

• this model takes air rifles to a new level with its rapid-fire semi-automatic system, exhausted air is used to cycle the bolt and index the magazine

• the 12-shot magazine gives a greater number of shots while the time between each is minimal

• the exceptionally quiet action makes it ideal for hunting and use in the field whilst the manual bolt allows safe loading without the risk of misfire

• on the right side is a cleverly designed safety that prevents the semi-automatic rifle from firing

• ambidextrous synthetic stock with combination adjustable butt stock and air cylinder

• recoil free

Fx.3500 monsoon

• this rifle gives rapid-fire action with single-shot precision

• it has an extremely quiet semi-automatic system similar to the Revolution which uses wasted air to cycle the bolt and index of the 12- or 16-shot magazines

• the manual bolt lever enables the rifle to be loaded safely without risk of a misfire

• thumb-hole stocks with adjustable recoil pad are available in synthetic (FX.3500) or walnut (FX.3502)

• recoil free

all rifles sold with filling probe, extra magazine and user manual - excluding riflescope

page 85

Fx airguns

cocking system side lever

magazine type12-shot - cal. 5.5mm / .22 - removable 16-shot - cal. 4.5mm / .177 - removable

stock1. synthetic - thumb-hole stock with adjustable recoil pad or2. walnut - thumb-hole stock with high adjustable recoil pad

calibre5.5mm / .22 or4.5mm / .177

barrelmatch grade (Lothar Walther) choked, length: 500mm

weight synthetic stock: 2.9kgs walnut stock: 3.1kgs

power settings: 7.5 - 48 joules

Fx.7500 verminator

• the Gladiator on a diet ! • delivered in a compact hard-case - all you do is

attach the cylinder combined butt assembly and you are shooting !

• synthetic pistol-grip stock • muzzle flip (FX.905) mounted as standard• patented power adjuster that gives the rifle

three different velocity settings - recoil free

cocking system straight pull with sprung return

magazine type 8-shot magazine - removable

stock synthetic - ambidextrous with adjustable recoil pad

calibre5.5mm / .22 or 4.5mm / .177

barrelmatch grade (Lothar Walther) choked, free floating,length: 210mm

weight 2.4kgs

power settings: 7.5 - 25 joules

Fx.6400 royal 400

• one of the latest creations with a robust mechanism and a new smooth operating side lever cocking system

• thumb-hole stocks with adjustable recoil pad are available in synthetic (FX.6401) or walnut (FX.6400)

• this model comes with a 400cc big cylinder and a barrel sleeve working like a silencer

• recoil free

Fx.939 plastic riFle case

• stable design with foam lined internally and enough space for mounted scope

• contoured recessed latches - padlock tabs for added security • inner dimension: 121x27x7 cms (47.6" x 10.6" x 2.8")

all rifles sold with filling probe, extra magazine and user manual - excluding riflescope

page 86

Fx airguns

cocking system straight pull with thumb return

magazine type 8-shot magazine- removable

stock walnut - right-hand grip only

calibre5.5mm / .22 or 4.5mm / .177

barrelmatch grade (Lothar Walther) choked, free floating, length: 210mm

weight 1.45kgs

power settings: 7.5 - 30 joules

Fx.400 • flexi-hose kit with manometer to suit perfect

all FX weapons, including particle filter and pressure release screw

Fx.450

• 33mm attachment kit for slings, bi-pods etc. easy to mount on all FX cylinders

Fx.8500 ranchero

• our first pistol, based on the well-known Cyclone action with a comfortable right-hand chequered walnut pistol grip • straight-pull cocking system on the left - recoil-less

Fx.490

• rifle scope 3-12 x 44, crosshair with red illuminated center point (12 stages)

• multi-coated lenses Fx.491

• scope mounts for FX scope above (Ø 1 inch)

• available in three different sizes: low, medium and high

Fx.930

• barrel support for all FX standard barrels (Ø 14mm)

Fx.905

• muzzle flip

Fx.940

• added to existing FX cylinders this tube extension gives 45cc / 100mm more volume

Fx920-45 spare cylinder 45cc / 100mmFx920-65 spare cylinder 65cc / 140mmFx920-150 spare cylinder 150cc / 320mmFx920-185 spare cylinder 185cc / 390mmFx920-240 spare cylinder 240cc / 500mmFx920-400 rear spare cylinder 400ccFx920-500 rear spare cylinder 500cc

Fx.900

• spare magazine, 8-shot, cal. 4.5mm / .177

Fx.900-22

• spare magazine, 8-shot, cal. 5.5mm / .22

Fx.910-16

• spare magazine, 16-shot, cal. 4.5mm / .177

Fx.910-12

• spare magazine, 12-shot, cal. 5.5mm / .22

page 87

Fx airguns

we introduce the remarKable Family oF hw weihrauch products which enjoy world-wide sales based upon their quality of build, fantastic service life without need of repair and an enviable reputation for smooth controlled power once released by the standard production `Record` trigger - a box unit retained within the rear housing by two crosspins - with a delightful two-stage let off and an adjustable trigger pressure spring easily altered through a hole in the trigger guard. The mechanism, once cocked, activates a lateral safety catch which pops out of the top left side of the housing above the trigger and can be instantly pressed in and released for firing by simply swivelling the thum. Riflescopes of all types can be fitted and the rear of the rail has three recessed stop holes for a recoil arrest plug to sit in through the rear of your `scope mount. Various powers are available for different markets around the world but 7.5 joules is for countries with low limits, 16.3 joules for standard countries and 30 joules for countries where no limit applies. .22 (5.5mm) is standard for export but .177 (4.5mm) options are available - .20 (5.00mm) and .25 (6.30mm) barrels can be special ordered on a few models - please enquire. Left-hand stock options are also available but at a surcharge - please enquire. A micrometer target rearsight is available to fit the whole family of rifles - please enquire.

hw.100s + sK

• pre-charged sporting rifle, walnut stock, carbine barrel, moderator

• cylinder with gauge • available in caliber .22 or .177 and also

in a shorter carabine-version (HW.100SK)• excellent accuracy - recoil free

hw.100t + tK • .22 thumb-hole stock version• as above .177 (4.5mm)• also available in the short and compact

carabine-version (HW.100TK)

hw.97K + Kt

• under-lever carbine• standard version with a beech stock • also available with blue/grey

laminated or thumb-hole stock

hw.80

• break-barrel with highest power• beautifully shaped beech stock

hw.35

• break-barrel with barrel latch• beech stock with walnut finish

hw.30

• .22 lightweight family fun gun• as above .177 (4.5mm)hw.45

• pistol with full length `scope rail• ambidextrous grip

all rifles sold without scope

page 88

weihrauch

hw.30

• .22 lightweight family fun gun• as above .177 (4.5mm)

d.13350 350 magnum

• for those wanting a simpler and less-expensive wood stock rifle this is the answer - available in calibres .177 or .22.

• match type trigger and adjustable rear- and foresight • main cylinder base rail for mounting riflescopes

d.1354 54 air King • a side-lever loading recoil-less rifle• available in calibres .177, .22 and .25• smooth precision trigger with adjustable pressure let-off, adjustable rear- and foresight• fine quality wood stock • main cylinder with base rail for mounting riflescopes

d.1321 panther 21

• black synthetic stock with tactile fore-end and pistol grip stippling give this rifle a more modern appeal

• ideal for family fun or small vermin control• available in calibre .177 only• adjustable rearsight and foresight• main cylinder base rail for mounting riflescopes

d.1331 panther 31

• big brother to the model 21 above with increased power• available in calibres .177 and .22

d.1308 p8 magnum

• a smooth operating pistol suited for accurate target shooting or simply fun in the garden

• attractive black stippled stock• available in calibre .177 only

r.134 lts system

• a non-firing junior training system with mock rifle and electronic sensing target to encourage and analyse shooting technique amongst youngsters and trainees

• without sights• weighs only 2kgs !

164 scatt usb proFessional 10m trainer

• for rifle and pistol with or without ammunition• includes weapon sensor, target holder and software• precise analysis for exact and averaging information• uses infra-red sensors for highest precision • can be displayed on screen• options include trigger sensor and adaptations

for 25 m pistol and 50 m pistol and rifle

163 sam home trainer

• for rifles and pistols with computer link capability• with target holder, weapon sensor and USB connection• multi-weapon attachment for distances up to 10 metres• both receiver and target unit are now battery operated and

remote controlled - no need of cables !• no need for special targets - uses standard 10 metre cards• connected to your own PC it gives analysis of technique and

score, ready for printing• optional trigger sensor available

page 89

diana + hometrainer

M222M224 M223 M228M221 M229

m225 din connector

• for use in DIN standard 200-bar applications with five threads

• also only accepts 5-thread DIN adaptors supplied with all weapons: includes manometer and bleed air allen screw

m220 200-bar pump

• now even easier priming with a system useable by children• easily detachable rigid footplate• inclusion of a pressure gauge• includes a particle filter and condensation bleed valve at base• DIN standard 5-thread connector• 210cu cms volume of air per stroke

m208 Flexi-hose Kit

• hose kit with DIN standard 5-thread connector for our bottles, compressors or pump coupled to a standard 1/8“ female connector

• this accepts quick-fill probes used by some manufacturers or will couple to other hoses or units

m224 • 4 ltr without gauge

m221 • 4 ltr with gauge

m222 • 5 ltr without gauge

m223 • 10 ltr without gauge

m228 • 20 ltr without gauge

m229 • 10 ltr without gauge

all bottles For 200-bar use (tested to 300-bar)

except m229 which is 300-bar (tested to 450-bar)

m100 4-stage turbo-pump

• the new generation of high-pressure-pumps - patented• our already well-functioning and reliable M220 pump

has been revised and improved by the new 4-stage system• very robust and stable construction• begin pumping with 4-stage technique to reach around 150 bar

and then you can gear down to 3-stage and proceed pumping with ease to fill your cartridge to wanted pressure

• stage switch is located between the handles• 4-stage = 280cu cms• 3-stage = 200cu cms• includes a particle filter, pressure gauge,

DIN standard 5-thread connector and condensation bleed valve at base

morini

page 90

recharging eQuipment

page 90

b400 bauer junior ii compressor

• a compact mobile compressor suitable for all situations• works on 230 V and provides the 300 or 200-bar charging

(please specify when ordering)• 300-bar compressor version and B305 multi-fill switch panel

is needed for charging 200- and 300-bar cylinders • can be used quite satisfactorily for refilling large bottles• with safety system relief valve• filtration system provides breathing air quality eliminating

worry of long-term internal damage to expensive air weapons• total weight 46 kgs• supported worldwide by Bauer’s and Gehmann’s distributors• 110 V / 60 Hz option available

b300 bauer s30 compressor

• a lightweight (37 kgs) mobile compressor for 200- or 300-bar (specify when ordering)

• 300-bar compressor version and B305 multi-fill switch panel is needed for charging 200- and 300-bar cylinders

• a long hose with large manometer carries a smoothly operating regulator valve enabling absolute accuracy of charging pressure

• fast charging - a match air rifle cylinder can be recharged from 50 to 200-bar in 60 seconds!

• suitable for large bottle refills • exceptional high-quality air filtration system• a clear front panel illustrates the method of use and the

owners handbook is very comprehensively written for maximum operator safety

• 110 V / 60 Hz option available

m203 compressor to bottle hose Kit

• for use when charging master refill bottles direct from compressors• flexi hose with 200 bar DIN connectors at both sides

technical speciFication

• 230 V /50 Hz• weight: 37kgs• height: 34cms • width: 33cms• depth: 60cms• filling power: 30 l/min

technical speciFication

• 230 V / 50 Hz• weight: 46kgs• height: 42cms • width: 39cms• depth: 66cms• filling power: 100 l/min

b305 multi-Fill switch panel

• for charging of 200- and 300-bar cylinders• easy connected with all Bauer compressors

morini

page 91

recharging eQuipment

page 91

843 gehmann alloy butt

• an inexpensive blue alloy butt plate assembly• adjustable for height and radius on the base• top and bottom legs can be positioned for angle and length

over the shoulder depth• suitable for fitting to all rifles with standard attachment bolts• for right- or left-hand shooter• laser engraved indications

700-iii mec contact-iii

• as 840-III but all silver

709 mec butt hooK unit

• fully adjustable butt / hook assembly• combines 700-III with a steel hook set• laser engraved settings

835 alloy butt pad

• an inexpensive black rubber butt pad which can be moved vertically on its black alloy base which carries settings

840-iii gehmann contact-iii alloy butt

• a lightweight but universally adjustable alloy butt plate assembly• can be retro-fitted to nearly all current production and some older

match air rifles• can be raised or lowered and contoured to the shoulder profile• can be laterally adjusted on the central pivot block

for right- or left-hand shooter or to step the rifle nearer to or further from the face

• laser engraved indications

843r as 843 but red

809 gehmann butt hooK unit

• fully adjustable (also for angle) butt / hook assembly• includes a hook set and ‘Top-Grip‘ rubber surface • stable alloy / steel combination• laser engraved settings

morini

page 92

customising

page 92

840 alloy handstop

• multi adjustable in all directions• pivots for vertical angle, left and right position

and distance from base rail• removable spacer provides two widths for the

thickness of your hand• detachable press-button swivel stepped from

the body for greater comfort• fits all standard rails• weight only 135grms• silver finish with a special non-slip surface• in a solid alloy carry case• Gehmann quality “Made in Germany”

845b blue alloy width-adjustable handstop

• unique split centre clamping design permits profiling to the individual’s preference

• attractively blue anodised• ball-fitting detachable sling swivel

845

• as 845B but red

845s

• as 845B but silver

846 mec handstop and swivel

• alloy handstop with tactile circumferential rings

• detachable press-button swivel stepped away from the handstop for comfort

707 handstop

• 1” diameter with tactile ring and milled edge• includes button release swivel• locks to the fore-end rail by screwing upward

morini

page 93

customising

page 93

=+

708-uni gehmann bi-pod

• retractable legs• nylon liner on rail clamp protects rail

from marks• strong steel and alloy construction

708-stop handstop

• a handstop and swivel to suit our 708-Uni

• snap-in sling swivel

841a barrel extension tube

• anodised alloy with two moveable weights• matching sight-height rearsight base• foresight can be positioned over a longer radius• reduces noise at the muzzle• for Anschütz air rifles only

719 mec trigger blade

• precision machined alloy• rubber strips for fingertip sensitivity• adjustable in any axis• easy to lock in position

• 719TA Anschütz• 719TF Feinwerkbau• 719TS Steyr• 719TW Walther

704 mec Foresight extension For match air riFles

• lightweight alloy tube• two steel weights can be moved along the tube• enables the sight position to be extended forward• matching height rearsight base• reduces noise at the muzzle

• 704A Anschütz• 704 Feinwerkbau• 704S Steyr• 704W Walther

717 super-gyro wrist exerciser

• a dynamic ball requiring constant rhythmic gyrations to perpetuate the spinning - thus generating muscle tone and growth in the shooter’s wrists and forearms.

• lightweight, for use anywhere, any time• equivalent torque of 15kgs and 10,000 r.p.m.• with quick-start pull-cord

718-xb gyro-twister x-beam

• as 717 but larger and heavier• a development of gyro wrist

exercisers but also with a kaleidoscopic light effect

• equivalent torque of 17kgs and 14,000 r.p.m.

708 bi-popod riFle rest

• inexpensive and easy to use • keeps your rifle upright • strong steel with large feet• fits standard rails• clamp screw also fits earlier Parker-Hale rails

morini

page 94

customising

page 94

848 adjustable high sight base set

• infinite vertical lift from 6 to 15mm• finished in matt black alloy• laser engraved indications• precision engineered to fit Feinwerkbau rails

• 848A for Anschütz• 848W for Walther

849 multi-directional high sight base set

• vertical lift from 6 to 15mm and 6 mm laterally• easy locking in position• matt black alloy• precision engineered to fit Feinwerkbau rails

• 849A for Anschütz• 849W for Walther

847 alloy high sight base set

• vertical lift 7.5 mm• spring-loaded clamps for quick grip• red anodised

• 847S silver• 847B blue

859a height adjustable & extendable s̀cope rail

• heavy duty standard size rail clamps on base - 11mm top extension rail - lenght: 27.5cms• thread locking for extension rail to base• overall height lift 17mm - 3 x height settings overall rail length: 25 cms maximum outside clamping length: 18cms

844 multi-height bases

• for all standard rails• offers five height capabilities (up to 28mm) - 4 with packing discs

supplied (4 x 1mm, 4 x 2mm, 4 x 4mm, 4 x 8mm)• complete with different length allen screws to suit the chosen height• lateral shift: 5mm• attractive alloy and black combination• precision engineered to fit Feinwerkbau rails

• 844A Anschütz• 844W Walther

morini

page 95

customising

page 95

858 universally adjustable wedge Fore-end

• fore-end with adjustable cant and height• silver alloy• suitable for nearly all different kind of stocks• fits for all standard fore-end rails

842 rear base extension mount

• rear extension for standard receiver rails• drops the rear sight-line height on rifles

where this is not normally possible• calibrated rail• double clamping for security when fitting• matt black alloy• further extension can be achieved by using our

anti-glare tubes 556-25, 556-35 + 556-50

835 alloy butt pad

• an inexpensive black rubberised alloy butt pad• can be moved vertically • carries settings

844-rF extension rail For above

• 152mm extension rail for 844 multi-height base set • replacement top-plate provides sight rail extension• preferred posisition can be individually chosen• height: 5mm• laser engraved indications• precision engineered to fit Feinwerkbau rails

• 844-RA Anschütz• 844-RW Walther

844 multi-height bases

• for all standard rails• offers five height capabilities (up to 28mm) - 4 with packing discs

supplied (4 x 1mm, 4 x 2mm, 4 x 4mm, 4 x 8mm)• complete with different length allen screws to suit the chosen height• lateral shift: 5mm• attractive alloy and black combination• laser engraved indications• spring-loaded, stable clamps • precision engineered to fit Feinwerkbau rails

• 844A Anschütz• 844W Walther

morini

page 96

customising

page 96

288 senior‘s shooting riFle rest

• designed for the new seniors‘ disciplines emanating from Germany

• a vertical support device for 3-P rifle• adjustable height support bar with scale• strong, U-shaped base plate - can be

permanently installed• length: 87cms• weight: 3.200grms

705 torQue wrench

• supplied with 4 bits: SW.2.5, SW.3, SW.4 + SW.5 mm• adjustable from 4 - 12 Nm• oxidation free and suitable for a lifetime’s use

• 706 3/16 “ bit (extra)• 706.SC screwdriver bit (extra)

866-n gehmann bit set • rubberised tool with magnetic bit-holder in a rigid case

• hexagonal bits: 1.5, 2.0, 2.5, 3.0, 4.0 + 5.0• Philips pattern: 1, 2 + 3 (cross slot bits)• Pozi-drive bits: 1, 2 + 3 (cross slot bits) • screwdriver bits: 4, 5.5 + 8

morini

page 97

customising

page 97

273 295

218

295 pacKaway 3-p rest

• a new screw-thread and sectionalised support tube for your rifle and cartridge box when shooting 3-P

• solid tripod base ensures stability and your rifle‘s safety

• compact when disassembled• in compartmentalised zip-up

lightweight nylon bag with handle• hight adjusts from: 43 - 154cms• folded lenght: 40cms• weight: 1.900grms

218 3-p riFle rest

• our newest really heavy-duty rifle rest has fast-clamps at all main tube joint stations

• the really solid base ensures stability and full equipment security

• has a specially machined cartridge tray to accept our 869 bullet tray, two standard boxes of 50x rounds, a standard tin of match pellets or one of our 798 match pellet flippers

• hight adjusts from: 60 - 164cms• folded lenght: 55cms• weight: 2.600grms

273 3-p riFle rest

• for resting the rifle between shots• cartridge box can be positioned

to suit you• solid tripod base

now with improved clamps and a locking bar at the base

• height adjusts from: 58 - 167cms• folded length: 55cms• weight: 1.950grms

297 universal `scope mount For 3-p riFle rests

• can easily attached to different kind of tube diameters • nylon liner protects bar from marks• fully adjustable• supplied with 276 universal ball and socket joint

morini

page 98

spotting ‘scopes and stands

page 98

237

235

236

238

291 3-position riFle rest For table mount

• includes cartridge tray holder and solid clamp• hight adjusts from: 49 - 87cms

296 universal mounting cartridge tray

• can be fitted to all support tubes• allows cartridge box to be positioned as you want

235 Flexi riFle support

• for beginners, juniors and invalids • gives support of your rifle‘s fore-end on a pivoting mount• strong spring damping to rifle support bracket• vertical height adjustment to 78cms• solid base for great stability

eQuipment For 235

• 236: 30cms vertical extension rod• 237: spring tension test rods

for competition control• 238: optional table mount:

• provides an alternative form of mounting

• can be screwed down direct to a table• allows for some height adjustment of

the vertical rod

234 Flexi riFle support without base

• length: 35cms

morini

page 99

spotting ‘scopes and stands

page 99

248 244

order code model magnification objective lens field at 1000 m length weight angled eyepiece suitable for

240 Gehmann `Angled` 18 - 54 x 60 mm 27.5 - 16.2 m 310 mm 736 g X 10 - 100 m

220 Gehmann `Special` 20 - 60 x 60 mm 26.2 - 15.2 m 350 mm 1100 g X 10 - 100 m

224 Gehmann 20 - 60 x 60 mm 26.2 - 15.2 m 310 mm 940 g X 10 - 100 m

244 DGJ 30 30 x 50 mm 22.8 - 17.0 m 250 mm 577 g X 10 - 100 m

248 DGJ 20 20 x 33 mm 35.0 - 16.0 m 180 mm 262 g X 10 - 50 m

255 + 256 Kowa TS 501 20, 20 - 40 x 50 mm 39.0 - 26.0 m 215 mm 380 g X 10 - 100 m

263 Kowa TS 502 20 x 50 mm 39.0 - 26.0 m 235 mm 380 g - 10 - 100 m

230 Kowa TSN 661 20 - 60 x 66 mm 33.2 - 17.5 m 311 mm 735 g X 10 - 300 m

231 Kowa TSN 601 20 - 60 x 60 mm 33.2 - 17.5 m 299 mm 735 g X 10 - 300 m

266 Kowa TSN 821 50, 20 - 60 x 82 mm 33.0 - 17.5 m 384 mm 1400 g X 10 - 300 m

230 Kowa tsn 661 body only

• an angled scope body for: 239/ 20-60 20-60x eyepiece

240 gehmann `angled´

• angled eyepiece• 18-54 x 60mm zoom• including carry bag

220 gehmann `special´

• angled eyepiece• 20-60 x 60mm zoom• includes table tripod with

adjustable handle + head• carry bag

248 20 x 33244 30 x 50

• angled eyepiece• with mini-tripod and vertical post• cased

224 gehmann 20 - 60 x 60

• black rubberised waterproof finish• metal end-caps for best protection

255, 256 + 263 Kowa ts 501 & ts 502

morini

page 100

spotting ‘scopes and stands

page 100

272

278

277

279

274

270

277

270 universal stand

• suitable for range or field use • easily mounted using the grip clamp• with 276 ball and socket head• extendable rod gives an overall reach of 50 - 100 cms

277 cullmann tripod

• robust, solid-based, all coupled to an exceptionally strong central column clamp

• additional bracing on legs for greater stability

• vertical rod can be extended to 180cms

• supplied with 277K ball and socket mount - a quick-release plate is also available for prone

• length folded: 31cms• weight: 1.690grms

277K ball & socKet joint

• exceptionally strong universal joint with standard-thread spigot for securing `scopes and camera bases

272 tripod `scope stand

• full height stand, adjustable tripod and vertical rod• supplied with 276 universal head• suitable for 3-P using our universal swivel arm• folded: 65cms (22.5“) • weight: 2.400grms

274 alloy stand

• lightweight brushed and anodised aluminium• adjustable rod (60cms extensions available)• supplied with 277K universal joint• fold-up legs for flat storage• suitable for all scopes and direct or indirect

mounting of our 224• weight: 1.400grms

279 broad tripod

• wide extendable legs with internal bracing• extendable central column • adjustable scope bracket with handle• maximum extended length: 151cms• collapsed: 50cms• weight: 1.200grms

278 extension For 274

• 60cms

276 ball and socKet joint

• universal joint gives chosen sight line• 1/4“ threaded base thread but this unit

is supplied with a spare 3/8“ base

279 see page 98

morini

page 101

spotting ‘scopes and stands

page 101

3 41 2

785 & 786 gehmann match pellets

• Gehmann H & N ‘Finale Match’ • tins of 500 - rifle or pistol• sizes 4.49mm or 4.50mm

For the full range of H & N pellets please consult our price list

798 gehmann pellet Flipper

• .177 match pellet flipper box• filled from 500 tin of pellets• lower tray is depressed, latched and the tray shaken - pellets drop nose down

into 100 x holes in rows of ten ready for shooting• surplus pellets are shaken back into their tin via a cut-out in one corner• the lower tray latch is released and all pellets pop up in lines ready for use• foam-lined lid protects pellets once closed

799 pellet tin cover

• nylon sleeve, stops accidental spills of match pellet tins without a screw lid

• possibly shooting’s cheapest aid !

710 wood cartridge box

• manufactured in finest beech • will last a lifetime, if looked after• precisely locates eight trays,

each carrying 10 rounds• front exposed tray is locked in position by

the lid once closed over the other rounds• supplied with shot marker-pins and

mini-target for marking shots

869 .22 cartridge box tray

• a simple aid for separating five lines of five .22 rounds in a box of 50• the box is pressed in the tray and separate lines of bullets stand up

ready for use - turn the tray over, repeat the process and the remainder stand up - simple and easy

• for the following manufacturers: Federal, Fiocchi, Geco, Lapua, RWS, SK (not Eley)

morini

page 102

eQuipment

page 102

138 rim-thicKness gauge

• measures .22 lr rims• rounds are placed in a hole and the gauge moved until it stops• once gauged the round is placed with others of the same mark• once batched, rounds have identical head-space and therefore be held in the breach in a

identical position prior to firing - immediately improving each batches` ballistic consistency• this critical process is necessary to improve scores by paying greater attention to the

smallest detail - some times a simple rule even forgotten by the best

760.... vFg cleaning

• we offer the full VFG felt range for rodding and shoot-through• adaptors to suit VFG rods and others like Parker-Hale• for all calibres of weapons

782 pull-through wicKs

• suitable for rifle or pistol and for all calibres• replacement wicks (784) available• very quick and easy to use• lightweight and easily transported

900-22 breach plug with saFety Flag - .22

• plug has two annular rings to give a snug fit and protect your breach against damage (1)

• nylon cord eliminates damage should the mechanism be accidently closed (2)

• visual indicator is very conspicuous red (3)• will not damage other equipment in your carry case

901-4.5 calibre .177902-32 calibre .32903-38 calibre .38, .357, 9mm904-44 calibre .44905-45 calibre .45906-308 calibre .308/7.62, 6.5 x 55, 7.5 x 55 & 57, 8 x 57907-12 calibre .12 gauge

715 handwarmer

716 charcoal sticKs

• 12 x fuel-sticks for 715

711 shot counter

• manually operated shot counter• prevents over-shot error

(1)

(2)

(3)

morini

page 103

eQuipment

page 103

142

139

140

132 - 136 scoring gauges

• all conform to I.S.S.F. rules regarding plug diameter• magnification helps the scorer with judgement• outward scoring gauges available for air rifle and air pistol, inner ten for air pistol • spring handles avoid possibility of tearing shot holes

156 disag `rm iv´ target scoring system

• for all targets: air rifle and air pistol, 50m small bore, running target, gallery rifle, 10m rapid-fire turning target

• light weight, modern design• multi lingual display, user-friendly menu• for targets up to 20 x 20 cm• PC compatible, RS-232 port or USB• with automatic target printing of the scores• 110 V / 60 Hz option available

158 disag `rm iii universal´ target scoring system

• automatic system for air rifle and air pistol, gallery rifle, small-bore rifle and pistol, running target rifle (10 - 100 mtrs) and any full-bore weapon to a maximum target of 26 x 26 cms

• a high quality item that is easy to handle• PC compatible and also other DISAG equipment• provides score and timed performance analysis for two-shot or

rapid-fire shooting even using variable-time turning targets• with target printing of achieved scores• 110 V / 60 Hz option available

730

• as 142 without score screen

142 illuminated scoring gauge

• battery operated illumination• 10 x magnified screen with

multi-calibre scoring rings

magnified: • 132 for .177 / 4,5mm• 133 for .22 l. r. / 5,5mm• 133P32 for .32• 133P38 for .38• 133P45 for .45• 132NLG outward - for air rifle• 132NLP outward - for air pistol• 132LP-IT air pistol - inner 10

without magnifier:• 135 for .177 / 4,5mm• 136-22 for .22 l. r. / 5,5mm• 136-32 for .32• 136-38 for .38• 136-45 for .45• 135NLG outward - for air rifle• 134NLP outward - for air pistole• 134LP-IT air pistole - inner 10

140 boxed set oF gauges

• a wooden box with foam-lined lid to store and protect all gauges without magnifier (134LP-IT excluded)

139 boxed set oF gauges

• as above, but it comes with all, magnified and non-magnified gauges (132LP-IT + 134NLP-IT not included)

morini

page 104

ballistic test eQuipment

page 104

gehmann prooF-testing gauge

• a gas pressure operated test gauge for ammunition service pressures and ballistic accuracy

• an unique advantage of our machine is the ability to use both test systems: copper rods or quartz crystals (Piezo test) - at the same time if desired

• supplied in four versions:1. rimfire pistol and revolver cartridges - bolt action2. rifle cartridges up to 15mm base diameter - bolt action3. cartridges up to 37mm base - bolt action or falling block 4. cartridges up to 50mm diameter - falling block

830 test rig For .22 lr. handguns

• excellent quality at an affordable price• universal clamp suitable for air or live-round pistols• longitudinal carriage for precise shooting alignment• adjustable levels of recoil to suit all handguns• identical repositioning - shot after shot

820 gehmann riFle test rig

• for precision testing of rifles - a new design to improve stability

• rifles, in stocks, are clamped at butt and fore-end, the clamps being soft to eliminate pressure points and wide enough apart to accomodate large fittings

• fore and aft travel is along lower bushed rods with spiral springs to the rear to absorb recoil on calibres up to .243 Win. - big bore adaptor frame accomodate up to 8 x 57 - but available extra (828)

• two transverse springs at the front give centralisation before and after testing

• good enough to be used by ammunition- and weapon-firms, national teams, specialized dealers, etc.

821 pistol and revolver adaptor Frame

• this stable, rubberiesed adaptor frame allows easy handling and testing of all well-known handguns - designed to be used on 820

828 big bore adaptor Frame

• two strong handels and six adjusting screws with rubber plates allows an easy testing of rifles up to 8 x 57 calibre

• designed to be used on 820

morini

page 105

ballistic test eQuipment

page 105

750-1500

• for all weapons, long rod with 1 x 500 grms weight plus: 1 x each 140, 360, 500 grms

750-1360K

• for pistols, short rod with 1 x 500 grms weight plus 1 x each 360, 500 grms

750-500

• moving target rifle, long rod with 1 x 500 grms

750-500K

• for air pistol, short rod with 1 x 500 grms

751 individual weights:

• 751-140 140 grms• 751-360 360 grms• 751-500 500 grms

735 1500 grms weight set • sprung-loaded short 500 grm bar supplied with

1 x 140, 1 x 360 and 1 x extra 500 grm weight giving 1500 grms total weight

trigger weight gauges

• hand-held gauges with a black indicator which abuts a red drag indicator to show final reading

• red drag indicator is easily reset

890 range 25 - 250 grms

891 range 50 - 500 grms

892 range 200 - 2000 grms

894 range 5 - 50 grms

758 i.s.s.F. sizing box - For live round pistols

• tests for I.S.S.F. overall size rules (8.1.6.0)• in metal with a clear perspex lid

759 i.s.s.F. sizing box

• as above -for air pistols• I.S.S.F. - rule: 8.1.6.0

gehmann trigger weight testers

• high quality trigger weights manufactured in a stainless finish for precisely measuring at home, club or during a competition

• conforms to I.S.S.F. regulations whether used with or without the rubber sleeve around the top of the suspension arm - when removed a knife-edge in the top bar gives precise location on the trigger blade

• accuracy of each weight guaranteed to I.S.S.F. requirements• I.S.S.F. - rule: 8.4.2.4.2

morini

page 106

ballistic test eQuipment

page 106

168 combro cb-625 mK.iv

• compact chronograph and kinetic energy meter• easy to carry - battery operated• with USB 3-pin port, but without conector

(can be purchased at every electronic shop)• specifically designed for airguns• excellent value for money

178 bmc 18 velocity gauge

• high technology micro–controlers for greater precision • user-friendly infra-red remote control• USB port so an adapator is not needed for use with

later model computers• software supplied turns your BMC 18 into a true

ballistic laboratory• with use of the remote control the infra-red light barrier

can be modified to suit each calibre• measuring range: 85 – 2000 m / s• acceptable calibers: 4.5 – 12.7 mm (.117 - .50)• precise to: < 1 % of LCD reading• other models

on request (e.g. BMC 21)

758 i.s.s.F. sizing box - For live round pistols

• tests for I.S.S.F. overall size rules (8.1.6.0)• in metal with a clear perspex lid

736 i.s.s.F. prone Front arm-angle gauge

• a plastic device for the prone discipline only• measures angle of fore-arm to the ground to check

it is not too shallow, as per I.S.S.F. rules• I.S.S.F. - rule: 7.6.1.1

737 i.s.s.F. jacKet button position gauge

• alloy plate to measure distance from button to edge of jacket

• I.S.S.F. - rule: 7.4.9.3.2

752-s 80n i.s.s.F. button position pressure gauge

• measures correct button distance with ram pressure• provides exact distance from button to edge of jacket• given results are easily readable on a clear scale• I.S.S.F. - rule: 7.4.9.3.2

168-n combro cb-625 mK.v

• as above, but translucent blue• includes angle adjustable support and

steel pipe between sensors

morini

page 107

ballistic test eQuipment

page 107

755 clothing thicKness gauge

• manufactured in itself to I.S.S.F. regulations• measures thickness of materials to ensure no extra support

is used to gain an advantage over fellow competitors• the machine is easily handled by any referee• three coloured scales are used on the gauge which measures

from 0 - 20mm by 0.5mm increments• pressure is applied via two 30mm pads exerting 50 + 6 Nm• I.S.S.F. - rules: 7.4.9.3 and 7.4.9.4

755-n clothing thicKness gauge

• measures thickness of materials to ensure no extra support is used to gain an advantage over fellow competitors

• the machine is easily handled by any referee • the results appearing on a L.C.D. display• I.S.S.F. - rules: 7.4.9.3 and 7.4.9.4

756 boot gauge

• for measuring the sole length to height ratio and sole thickness in accordance with I.S.S.F. rules

• a boot is inserted under the sole clamps and the end-stop adjusted for sole length, this automatically gives a vertical datum on a plexi-glass plate - at the same time a vertical test passes down in the boot to measure the sole thickness

• manufactured in itself to I.S.S.F. standard• supplied in a carry case• I.S.S.F. - rule: 7.4.9.5

I.S.S.F. competition control equipment and accessories weight scales, dimensional diagrams, clothing gauges, windflags, lux meter, competitor numbers etc.

available on request

757-n i.s.s.F. clothing rigidity gauge

• manufactured for testing to the latest I.S.S.F. rules• applies pressure to a seamless area of material• an electronic sensor situated under the material emits if the material

does not conform to the rules - the result appearing on a L.C.D. display• automatic reset to zero occurs after each reading• automatically switches off after a minute without use to conserve power• supplied with case which provides protection in transport• I.S.S.F. - rule: 7.4.9.2.2

morini

page 108

ballistic test eQuipment

page 108

protect your investment either hard or soFt

morini

page 109page 109

carry cases and riFle slips

787 heavy padded slip

• an inexpensive (128 cms) padded slip with carry handles and shoulder strap

• full length two-way zip

788 bacKpacK

• a longer padded backpack (134 cms) with two large external zipped pockets and a nose pocket

• full length two-way zip• excellent internal padding

740 bacKpacK

• a quality black rip-free nylon backpack for one rifle• full length two-way zip• two external pouches and nose pocket with zip• 130cms long with 8cms thick foam padding• height: XXL (35cms) for `scope or extrem sight bases

734 bacKpacK

• high quality dark blue rip-free nylon• full length two-way zip• external pouch for air cylinders or accessories• 130cms long with 8cms thick foam padding

morini

page 110

carry cases and riFle slips

page 110

450 shooters carry-all

• hard wearing and very robust lightweight nylon• rigid base with wide-spaced wheels one end• tow handle with zip cover extends at other• one end, two large side zipped pockets• zipped and removable full-size base panel• two carry handles and one strong shoulder strap• 80 x 40 x 40 cms (airline acceptable!)• dark blue

450K

• as 450 above but reduced in size for shooters requiring a slightly smaller bag

• two carry handles and one strong shoulder strap• 70 x 40 x 35 cms• dark blue with white piping

451 roller carry bag

• square vertical profile for maximum size to capacity ratio• three seperate zipped mesh compartments in top half for

safe storage of individual items of equipment during transit• clear lower section with zipped overlay to seperate top

and bottom halves of the bag• two zip closure external top panels of equal length• heavy-duty snap toggles and shoulder straps• extending rigid pull handle with snap-lock for position• additional grab handles either end • quality rollers• 80 x 40 x 40 cms (airline acceptable!)

morini

page 111page 111

carry cases and riFle slips

955 aluminium case

• for one rifle with sights• rigid outer with stiff inner laminates• strong hinges and lockable clasps• 121 x 25 x 10.5 cms (48“ x 10“ x 4.1“)

981 aluminium case

• as 951, but with wheels

982 aluminium case

• as 949 above, but with wheels

949 aluminium case

• for two rifles• rigid outer with inner laminate• strong hinges and lockable clasps• 122 x 33 x 11 cms (48“ x 13“ x 4.3“)

951 aluminium case

• for one rifle with sights• rigid outer with inner laminate• lockable clasps• matt silver finish• 122 x 28 x 11 cms (48“ x 11“ x 4.3“)

958 aluminium case

• for two rifles with sights• rigid outer with inner laminate• strong hinges and lockable clasps• 122 x 33 x 10.5 cms (48“ x 13“ x 4.1“)

952 plastic riFle case

• for one rifle with sights• lockable with two catches• 122 x 26 x 11 cms (48“ x 10.2“ x 4.3“)

953 plastic riFle case

• for two rifles with sights• lockable with two catches• 132 x 32 x 11 cms (52“ x 12.6“ x 4.3“)

959 plastic riFle case

• for one rifle with sights• budget priced• 121 x 23 x 10 cms (48“ x 9“ x 4“)

988 plastic riFle case

• watertight and very stable design• stainless steel ball bearing wheels with

durable tire for easy transport• 126 x 33.5 x 12.5 cms (50“ x 13.2“ x 4.9“)

morini

page 112

carry cases and riFle slips

page 112

452 bacKpacK pistol bag

• hard wearing lightweight nylon• clamshell design so the bag splits into two equal halves• sides reinforced for rigidity with padding on the insides• lid and base are internally egg-box foam padded• two padded shoulder straps and a carry handle• 50 x 40 x 18 cms (19.7“ x 15.8“ x 7.1“)

950 aluminium case

• for two pistols• robust hinges and locks• incredible value• 40.5 x 31.5 x 10 cms (16“ x 12.5“ x 4“)

989 plastic case

• for two pistols• stable and watertight design• 44 x 29.5 x 16 cms (17.3“ x 11.6“ x 6.3“)

980 trolley case

• for two pistols• aluminium case with

lockable clasps• 10 cms foam padding• positional dividers to

personalize your case• 48 x 36.5 x 12.5 cms

(19“ x 14.4“ x 5“)

morini

page 113page 113

carry cases and riFle slips

110-50 50 metre riFle

• technical qualities as 120-100• bullseye height 58.5 cms from the ground• 99 x 49.5 x 38 cms • weight: 49 kgs

available for larger calibres less bullet deflector plate 112-50

Gehmann target changers are the most diverse in the market - used at all levels - private, club, international and Olympic competition. They are designed to be trouble free in all theatres of operation with any form of climate. They are easily transported for situations where storage away from the normal installation is desirable and very simply connected-up, ready for service, with a minimum of help. Constructed of steel but weather-proofed, they operate with a minimum of moving parts to eliminate the possibility of malfunction in the course of competiton - reliability being our watchword. Operating from a choice of 12 volts with batteries or 230 volts mains-transformed (110 V / 60 Hz option), in banks of up to six at a time, they may be individually controlled by the shooter at the firing point. Target numbering has I.S.S.F. approval - so with video coverage both scoring and the tension involved can be relayed to and appreciated by spectators. Shooters can benefit from this during practice. Installations can be supplied with drums of cable (that including connectors), or if a more permanent installation is required, hard-wiring plans to customer’s specification. Suitable foundation plans are available if required.

Most importantly - these are considered environmental friendly as they trap spent rounds for final disposal.

118-50 drive unit made of stainless steel

120-100 50 metre Free pistol and 100 metre riFle

• for 230 volts (110 V / 60 Hz available without surcharge)• self-contained unit with 55 metres of cable (extra needed for 100 yards)• with one shooter control for forward / reverse target movement• has a single stainless steel electric drive situated above the target• the drive is easily removed for maintenance and is electrical standards

compliant - cannot be retro-fitted to earlier models• the drive guarantees first target use - ensuring no losses• external casing of improved powder-coating for longer weatherproofing• 3mm back-stop deflector plate is now of a higher-specification material• simple pull-handle allows spent rounds to drop from collector to your disposer• bullseye height 72 cms from the ground• 124 x 66.5 x 42 cms• weight: 76 kgs

can be used for 50 metre rifle with 126-50 guide plate

available for larger calibres without bullet deflector plate 130-100

about our products

morini

page 114

target changers

page 114

13

456

2

110n 50 metre small-bore riFle

• a self-contained changer with one 55 metre drum of cable and one shooter´s control for forward and reverse target drive

• for 230 V mains (110 V available without surcharge)• bullseye height 60 cms above ground• 100 x 50 x 37 cms• weight: 42 kgs

110 for 50 metre rifle but battery powered

130 For larger calibers

• supplied without bullet trap• as 120 without cable or switch

120n 100 metre small-bore riFle and 50 metre Free pistol

• for 230 V mains (110 V available without surcharge)• a self-contained changer with one 110 metre drum of cable and

one shooter´s control for forward and reverse target drive• for 50 metre small-bore rifle guide plate 126 needed - extra• bullseye 70 cms above ground• 124 x 63 x 41 cms• weight: 66 kgs

120 as 120N but battery powered

131 For 50 metres or more

• for 230 V (110 V available)• one unit with 55 metre drum of cable and

one shooter´s control switch to feed the targets• for 50 metre rifle or free pistol• 100 metre extension cable available (extra)• feeds up to 100 targets from the top hopper• shot cards drop to bottom collector• spent rounds lodge in the trap • bullseye height 90 cms above ground• 148 x 60 x 57 cms• weight: 80 kgs

170 high resolution video-systems For all shooting distances, available For out- or indoor usage

• can be used for training with one or two individuals or as a means of monitoring small groups

• ideal for self-scoring using Gehmann model 110 and 120 changers without need to scope shots

• set consisting of:1. monitor/screen2. monitor-mount (wall bracket)3. coax-cable4. housing (weatherproof)5. camera6. lens

These video-systems can be arranged for your personal need. Please inquire.

morini

page 115

target changers

page 115

180 manual air riFle changer set

• comprises a manually operated rotating drive wheel with V-belt to the target transporter drive which is operated by the shooter

• includes pellet trap with target holder and running cords• for standard size air rifle targets

180lp manual air pistol changer set

• as 180, with larger pellet trap and target holder - can be used for rifle

182,180,180LP are available illuminated - extra

182 electronic changer set

• interchangeable target holder for air rifle and air pistol only• the 230 V motor ( 110 V available) can be instantly switched

from forward to reverse and is fitted with a sensor to reduce from fast to slow drive with minimal target travel prior to turn-around

• especially silenced pellet trap to assist competitors• wired for installation without lighting• a modification is available for crossbow

100 25 metre turning-target changer

• 5 turning targets coupled to a 3-phase motor• T.P.E. timing for all known I.S.S.F. disciplines

and displayed on the control mechanism• mechanical linkages that are smooth and accurate

to within 0.2 seconds• aluminium, the changer is totally weather-proofed• supplied assembled and wired with 8 metres of cable• foundation plans available if required

101 10 metre air pistol turning-target changer

• 5 turning targets driven by a geared 230 volt motor• timing for 3 - 7 second turns or rapid-fire

over 4, 6, 8 or 10 seconds• easily mounted against a wall and sold without pellet trap

195 remote-control electronic air riFle and air pistol changer

• free standing and operated by remote control only• one of 70 targets in the top hopper drops down ready for shooting whilst

the shot card drops to the catcher at the base• following target appears automatically• easily convertable from rifle to pistol targets• pellet trap is easily removed• nickel-plated steel• 110 volt option without surcharge• 60.5 x 15 x 19 cms• weight: 9 kgs

morini

page 116

target changers

page 116

113 50 metre small-bore riFle targets

• 250 numbered targets on one band (I.S.S.F. approved)

115 repair sticKers For above

• 250 x 50 metre bulls to suit above

124 50 metre Free-pistol targets

• 100 numbered targets on one band (I.S.S.F. approved)

125 target repair sticKers For above

• 100 bulls to suit the above

284 4-Fold waterprooF mat

• exceptionally heavy-duty and durable waterproof mat• plasticoating on all surfaces with a large area of non-slip rubber elbows• thick foam padding for long-stay comfort on even the most difficult terrain• rugged handles to carry rifle and equipment on-range

287 Fluro rain cover

• rainproof cover to protect rifle and sights in wet conditions• maintains expensive equipment and protects your investment

against worst condtions

All kind of targets available upon request

187,188 and189 air weapon holders

• air rifle or air pistol• 1mm thick and containing a 3mm sprung backstop

187 air rifle: 10 x 10cms targets188 air pistol: 17 x 17cms targets189 air rifle and air pistol: both 10 x 10cms & 14 x 14cms targets

191 clay disK and standard target holder

• for both 10 x 10cms and 14 x 14cms standard targets• vertical posts for clay disc targets

114 & 116 target patches

• 1000 easy-peel stickers

114.s 15mm black114.w 15mm white116.s 19mm black116.w 19mm white

morini

page 117

target changers

page 117

862 cap

• Gehmann dark blue• longish peak• multi-adjustable for all sizes

860.b polo shirt

• `Fruit of the Loom´ 100% cotton shirt• `Team Gehmann‘ logo on left sleeve• circular logo on the chest• Gehmann dark blue• small, medium, large and extra large

864 rucKsacK

• Gehmann dark blue with `Team Gehmann‘ logo• exceptionally lightweight, rugged, rain-proof nylon• multi-pocketed externally with good zips• adjustable and very comfortably padded shoulder straps• external top hang-loop

860.w white

867-g Key ring

• a hollow-centre gold bullet on a key ring• keeps small things safe

867-s blacK

pin badge

• free with each Teamwear item while stock lasts

868 headband

• Gehmann dark blue• soft towelling• velcro-fastens behind head

catalogue available in CD or DVD format if required

morini

page 118

gehmann teamwear

page 118

catalogue available in CD or DVD format if required

Vebjoern BergNorway

winner World Cup final winner World Cup

European champion

Matt EmmonsUSA

Olympic champion, World champion

winner World Cup finalwinner World Cup

Katerina EmmonsCzech Republic

Olympic championWorld champion

European champion

Gyda OlssenNorway

European champion (multiple)Norwegian Champion

Gagan NarangIndia

World record holderwinner World Cup final

winner World Cup

Thomas FarnikAustria

World champion (multiple), European champion (multiple),

World Cup final winnerWorld Cup champion

Cheon Min HoKorea

Finalist Olympic GamesWorld Cup champion

Benjamin AicherGermany

vize European champion national league champion

Petra HorneberGermany

World champion (multiple)World Cup champion (multiple)

German champion (multiple)

Jean Pierre AmatFrance

Olympic champion, World champion (multiple),

European champion (multiple)World record holder

Team BelorussiaWorld champions (multiple)

European champions (multiple)

Angela KugeleGermany

European champion (multiple)German champion

European record holderGerman record holder

Sylvia AumannGermany

World championEuropean champion

German champion (multiple)

Hubert BichlerGermany

World championEuropean champion

German champion (multiple)

Frank DoblerGermany

World champion (multiple)European champion (multiple) German champion (multiple)

World Cup champion

Franck BadiouFrance

World champion (multiple)European champion (multiple)

Lee Eun ChulKorea

Olympic championWorld champion (multiple)

Jonas EdmannSweden

Olympic championWorld champion

Swedish champion (multiple)

Ljubov GalkinaRussia

Olympic champion, World Cup final winner, World Cup champion, European champion

Rebecca FrankGermany

World champion (multiple)European champion (multiple)German champion (multiple)

Tatiana GoldobinaRussia

World Cup champion (multiple)2nd Olympic

Je Sung TaeKorea

Finalist Olympic Games

Kristoffer SkellandNorway

European champion (multiple)

Team NorwegenEuropean champion (multiple)

P. T. RaghunathIndia

winner Asian GamesCommonwealth Shooting

Championships winner

olympic, international, national and club champions apply gehmann

page 119

reFerences

gehmann gmbh & co. KgKarlstrasse 4076133 Karlsruhe / germany

tel: (049) (0)721 24545 - 46Fax: (049) (0)721 29888e-mail: inFo@gehmann.cominternet: www.gehmann.com

your dealer: