6
GF-series Rotary Hiller Rotary Hiller for 2-, 4- and 6-rows for large volume, clod-free and stable ridges
GF-series Rotary HillerRotary Hiller for 2-, 4- and 6-rows for large volume,clod-free and stable ridges
We
rese
rve
the
right
of
alte
ratio
ns.
L0
4.0
90
1.E
N
04
/09
/20
00
462-103-02-GF-Serie_engl_RZ_02 03.04.2009 14:51 Uhr Seite 3
Robust and high performance:the GF-series Rotary Hiller
At its best – row after row
Efficient and consistent:
These rotary hiller can
handle the heaviest soil.
With their additional ridge
buildup, they ensure the
quality until harvest time.
Intelligent and precise:
The tines crumble the soil
intensively, left and right
of the ridges. The loosened
soil is used for the solid
large-volume ridge buildup.
Accurate and stable:
The GF-series Rotary Hiller
create even and
high-volume ridges.
The expectations of cultivators are very
high, as their intensive soil cultivation
requires consistency and reliability.
At the same time, they are expected
to work smoothly and cultivate large
areas. The GF-series Rotary Hiller
offer you these benefits. They intensively
cultivate the soil while destroying
annoying clods. The soil thus becomes
loose and can be used for ridge forming
and makes up the basis for a harvest
with a higher yield. Furthermore, these
rotary hiller can be converted to
full width cultivators with a few manual
actions prior to planting.
GF-SER IES
462-103-02-GF-Serie_engl_RZ_02 03.04.2009 14:51 Uhr Seite 4
Powerful features to the last detailand for all performance levels
GF-SER IES
Higher durability: In addition to
the standard support wheels (5),
twin support wheels (6) or
wide support wheels (7) provide
even more load capacity for all
rotary hiller.
Standard tines
Trapeze with speed
plate (option)
Bulbous VA with speed
plate (option)
Bulbous VA (option) Bulbous (series)
Low wear and tear on any soil!
Basic cultivating tines:
are coated with additional
wear and tear protection
Widia cultivating tines:
as hard as a diamond
due to soldering under
vacuum pressure
Special cultivating tines:
with resistant hard metal,
specifically for stony soils
B
S
W
1 2
5 7
6
3 4
Perfect condition: The shaping
board, suspended from swing
frames behind the covering body
assembly, allows large-volume
ridges. The necessary pressure
is reached via spring-loaded
press stays. Different shapers or
speed plates achieve the desired
ridge shapes and surfaces.
Durable and strong: The power
transfer of the Grimme Rotary
Hiller takes place via a durable
spur gear drive (1).
The option of the two-sided
drive (2) is ideal for
continuously
difficult
conditions.
Stone tines (option)
NEW
462-103-02-GF-Serie_engl_RZ_02 03.04.2009 14:51 Uhr Seite 1
Grimme Rotary Hiller as
per your specifications: All
machines are available for
row widths of 75–90 cm or
30–36 inch. The illustrations
show a 2-row hiller for
75 cm (1) or 90 cm (2) widths.
Rotary Hiller for 2-, 4- and 6-rows: the matching series for every type!
G F 75 - 2 , GF 9 0 - 2 , GF 7 5 - 4 , GF 9 0 - 4 , GF 75 -6 , GF 90 -6 , GF 75 -8
Attractive shape and stable:
The GF 75-4 forms exact ridges
as per your specifications.
Whether you decide on the
standard bulbous ridge shape (3)
or the optional trapeze-formed
ridge shape (4).
Safely through traffic: With high
working widths, the options for
end-row kit (7) come in handy
for safe road transport.
1 2
3 4
5 6Stable operation: The two
additional front wheels (5) give
your 6-row hiller even more
stability. The two-sided drive of
the machine (6) runs in series!
7
462-103-02-GF-Serie_engl_RZ_02 03.04.2009 14:51 Uhr Seite 5
Successful options for difficult conditions
OPT ION
Exactly in the spot for higher
yields: With the optional
sliding control (1) the feed
is always centered in the
ridge, thus reducing the risk
of green potatoes.
Optional rear support
wheels (2) improve the
exact depth guidance of
the cultivator.
1 2
3
5
Dämme harmonischverlängern
4
4Comfortable row travel:
Mechanically lowerable spraying
track clearing units (3) (option)
level the ridges.
Our tip for vegetable experts,
who grow carrots in ridges:
the hydraulically driven ridge
pressure roller behind the
cultivator (4) (option)!
Use the rotary hiller as a
full field cultivator: With a few
manual actions, the Grimme
Rotary Hiller becomes suitable
for classic soil cultivation (5).
Optional duck foot shares (6)
ensure planting into deeply
loosened soil. This technique
leads to great quality and yields.
An optional clamp for full width
operations (7) can be installed
with a few manual actions.
6
7
462-103-02-GF-Serie_engl_RZ_02 03.04.2009 14:51 Uhr Seite 6
Grimme Landmaschinenfabrik GmbH & Co. KG · Hunteburger Straße 32 · D-49401 DammePhone +49 5491 666-0 · Fax +49 5491 [email protected] · www.grimme.com
Your Grimme Partner for advice and service:
Use the rotary hiller
as a full width rotary
hiller: With a few manual
actions, the Grimme
Rotary Hiller becomes
suitable for classic soil
cultivation, also in
combination with the
GL 34 T, a 4-row planter.
1,550 mm1,850 mm
800 kg
2
75 cm
32 pieces
16 pieces
From 40 kW
150 HP
–
–
320Upon requestUpon request
Working widthTransportation width
Weight
Number of rows
Row spacing
Number of tines (50x12 mm)
Tines for stony soils (option)(60x12 mm)
Tractor performance
Angle gear with rigid neck
Reinforced gear for one-sided or two-sided drive (option)
Change gear
Rotor speed of tractor1,000 r.p.m.540 r.p.m.750 r.p.m.
GF75
-2
3,050 mm3,300 mm
1,400 kg
4
75 cm
64 pieces
32 pieces
From 70 kW
150 HP
230 HP
Option
300, 320, 332*Upon requestUpon request
GF75
-4
4,505 mm–
Approximately2,500 kg
6
75 cm
92 pieces
46 pieces
From 130 kW
–
300 HPSeries: bothsides
–
340––
GF75
-6
––
Approximately2,500 kg
8
75 cm
124 pieces
62 pieces
From 130 kW
–
300 HP
–
340––
GF75
-8
1,850 mm2,150 mm
900 kg
2
90 cm
44 pieces
22 pieces
50 kW
150 HP
–
–
320Upon requestUpon request
GF90
-2
3,650 mm3,900 mm
1,600 kg
4
90 cm
84 pieces
42 pieces
From 70 kW
150 HP
230 HP
Option
300, 320, 332*Upon requestUpon request
––
Approximately2,500 kg
6
90 cm
120 pieces
60 pieces
From 130 kW
–
300 HPSeries: bothsides
–
340––
GF90
-4
GF90
-6
* Others as options
We
rese
rve
the
right
of
alte
ratio
ns.
L0
4.0
90
1.E
N
04
/09
/20
00
Technical data
462-103-02-GF-Serie_engl_RZ_02 03.04.2009 14:51 Uhr Seite 2
