GLOVIEW Finger Touch Portable Interactive Whiteboard

(Gloview FP2 Board)

GLOVIEW Finger Touch Portable Interactive Whiteboard

(Gloview FP2 Board)

Description

Gloview Interactive Whiteboard FP2 Board is the first Portable Interactive Whiteboard that supports finger

touch. It can work with any projector or LCD Panel and turn the projector screen or LCD Screen into finger

touchable. Key features: auto-calibration; portable and finger touch; detect any non- transparent object; work

on any surface, no limit on the material; active size range from 40-85‟‟; record function: recording strokes,

pictures and shapes; gesture recognition.

*Innovation:

The Gloview FP2 Board is the first portable

system world-wide to integrate finger touch

and simultaneous multi-user finger touch

functionality, with high accuracy within 1 pixel.

Technology Advantages:

The first portable finger touch

interactive whiteboard in the world!

Before the Gloview FP2 Board, finger touch interactive whiteboard systems used predominantly Infrared or

Pressure Sensitive technology. With infrared technology, it is not easy to support multi-users writing together.

Typically, when two users write simultaneously at the same high level, there is interference between them.

The FP2 Board has the following unique technological advantages over these competing technologies:

1.Cost: FP2 BOARD is one third of IWB which adopts infrared or pressure sensitive technology;

2. Weight: FP2 BOARD is one tenth of IWB which adopts infrared or pressure sensitive technology;

3. Transport and installation costs: FP2 BOARD is one fifth of IWB which adopts infrared or pressure sensitive technology;

4. Detection: FP2 BOARD can detect finger, common eraser or any non-transparent object.

5. Support Multi-touch: we can develop multi writing in our education software.

6. Gesture Recognition: FP2 BOARD has many Gesture Recognitions, such as use “palm” to erase or the

use of two fingers to move the screen in all directions.

Features 1. Support finger touch: infrared pens are not

required. Users can use their finger or any pointer

to write and control the computer desk top directly

on the active area.

2. Multi-writing: two or more

users can write simultaneously.

VG

A

3. Automatic Calibration: Calibration

can be performed automatically and

completed within 5 seconds. Positional

accuracies within 1 pixel are

achievable.

4. Remote Interaction: Users can remotely interact

with the active screen by using a laser pen or

personal tablets.

5. Gesture recognition. Use your palm to erase, two-finger „V” to move icons and entities, two fingers to

scroll web browsers and zoom in and out.

Erase Move Scroll Bar Zoom In & Zoom Out

6. Portable and easy to install. You can fix the emitter and video sensors on the wall or board and at the

projector, respectively, using double sided adhesive tape. No specialist installation skills are required.

First Step ( Emitter installation) Second Step (Sensor installation)

Put the emitter part to the upper

of the projection screen.

USB

Power

Attach the sensor part to

the projector by double

adhesive tape.

USB

7. Turn normal whiteboard or

wall into finger touchable.

With Gloview Finger Touch, any normal

whiteboard or wall can be turned into finger touchable.

8. Any non- transparent object can be

used as pen, like a rolled paper.

With the LICT technology, users can use any

non-transparent object to control the active area.

Gloview Finger Touch Solution Typical finger touch interactive whiteboards are large, heavy and cumbersome. These systems incur costs like:

1. Shipping cost, because of weight and size,

2. Installation costs for fixed interactive whiteboards – specialist installation,

3. Maintenance of board surfaces. The surfaces can be damaged.

In comparison, Gloview‟s FP2 Board saves users because: 1. The Gloview FP2 Board is a third of the cost of traditional finger touch systems.

2. Gloview FP2 Board is light, portable and can be delivered by normal mail or express courier.

3. Installation can be completed by anyone. No specialist skills are required.

4. It can be mounted on a wall, non-reflective whiteboard and the active area can be anywhere.

5. The active area is flexible depending upon the users space considerations and ranges from 40” to 85”. The

FP2 can be installed in small rooms using short throw projectors.

Recommend Interactive Solution:

a. Projector+ Gloview FP2 BOARD + Wall = 40-85‟‟Finger Touchable Interactive Whiteboard

+ =

b. Projector+ Gloview FP2 Board + Common board= 40-85‟‟Finger Touchable Interactive Whiteboard

+ =

Specification Sheet for Gloview FP2 Board

Gloview Interactive Whiteboard FP2 BOARD

Calibration Automatic(5s) / Semi-automatic / Manual

Object detection Finger(stylus) or any non-transparent object

Delay <80 ms

Minimum active work area 40'' diagonal

Maximum active work area 85'' diagonal

Technology Laser Image Calibration Technology

Positional accuracy ±1 Pixel (Resolution: 1024 x 768)

Power Consumption 3.5W

Laser Power 150mW x2

Infrared Wave length 808 nm

Dimensions Emitter: 21cm x 7.5cm x 2.5cm/ Sensor: 12cm x 6cm x 4.5cm

Power requirements 5V/1A

Weight 0.50kg

Requirements Windows XP, Vista, Windows 7

Software Proprietary calibration and application software

Certification CE, FCC

Warranty 2 year limited warranty on the device

Components

1 x finger touch model , 1 x stylus, 1 x 4m USB cable, 1 x 7m USB cable,

1 x power adaptor , software

Gloview Finger Touch Technology Comparison Chart

Automatic

Calibratio

n

Finger

Touch

Multi

-touch

Accuracy

Portable

Active

Size

Maintenance

Cost

Gloview

FP2

Board

support

support

support

Best

Yes

40-85‟‟

Best

Best

Electro

Magnetic

No

No

support

Best

No

Fixed

Poor

Poor

IR

No

support

support

Best

No

Fixed

Good

Poor

Resistive

No

support

support

Best

No

Fixed

Poor

Poor

Ultrasound

No

No

No

Good

No

40-80‟‟

Good

Good

Specification of Whiteboard Software

Tools button Description

Easi 30 Whiteboard (3D Touch Series)

Description

Easi 3D White board is a fully featured interactive whiteboard system that transforms any

standard whiteboard, flat surface (such as wall) or projection screen into an

interactive whiteboard. Using Optical Calibration Technology, users can write and fully

control the computer on the projected surface.

Package Includes:

Infrared/Laser Pen

3D Calibration Device

Software

USB cable

USB Key

Ceiling Bracket

Warranty: 6 Months Replacement, 3 Years Limited Warranty; Free Maintenance During

the Warranty Period.

Supports Both Remote and touch Operation.

It works from up close or away. To work from away is impossible for other whiteboard, such as infrared,

ultrasound, and pressure sensitive whiteboard.

Write with Laser Pen

With Easi 3D Whiteboard, teachers can write or control the computer even when there is space between

the whiteboard and pen.But if you are using a traditional whiteboard, the teacher must go back to the whiteboard

to do the same operation.

How It Works

The Optical Pen can emit the infra-red rays on the screen.

The Signal Receiver catches the light point, and computer

transforms the coordinate, and then user can achieve the

operation like using mouse.

Writing With Laser Pen Writing With Infrared Pen

Feathers:

1, Freedom to Move and Inspire: Remote and Touch Writing. User can interactive with the whiteboard from

away. User can catch any area of the screen, even if the size of screen is large.

2, Easy to Use.Automatic calibration,

Whiteboard or Driving Software is not

needed.

Even at the beginning, Manual Calibration

is not needed. When the application software

starts, the device will finish calibrating

automatically. It will calibrate again when

the device or projector is moved a bit.

3, Multi-Point Touch: Two people can write

simultaneously.

4, Surface Material is not limited. You can write on any surface, such as the wall, blackboard, or LCD screen.

Any Resolution, such as 1024*768/1280*720/1440*900/1920*1 080.

5, Portable, easy to transport and Install. Package

includes : Calibration Device, Optical Pen and

Whiteboard (Whiteboard doesn't include electronic

parts and made of Plastic, it can be rolled, total

weight is no more than 1kgs).

How easy? Just stick the whiteboard on the wall

and put the calibration on the projector. That' s all.

7, White board can be used as normal. You can use

mark pen to write .

6, Make LCD Screen Interactive: Easi 3D

Whiteboard can transfer LCD TV or LCD

Screen into Interactive Panel. Cost is almost

half of traditional Touch Panel.

8, Record Function: User can keep the note

on the whiteboard and movement in the

video files.

CA-+13 )=C

Technical Data Why Choose Electronic Whiteboard?

Traditional Teaching Mode Electronic Whiteboard

1, A modern tool to

stimulate students' interest 1, The dust of chalk is

harmful to teachers

2, The display area is

fixed, the writing and

notes can' t be saved

or printed out. And it

is hard to eraser

3, Method of Teaching

is limited and abstract

knowledge is hard to

explain.

4, Teaching Plan isfixed

and impossible to

be recorded in digital

data.

in learning: Whiteboard

+ Projector-New Modern

Teaching Method.

2, Kinds of writing modes,

and teachers can interact

with the screen from away,

turning page, writing, etc.

3, Easy to make note on

the PPT, Word, Excel

documents and pictures.

It makes the class

dynamic, engaging and

fun.

4, It can record the

movement and notes

on the whiteboard.

This Information can

not only be sent to

students through internet,

but also enrich the

educational sources of

school.

Why Choose Easi 3D Whiteboard

Calibration

Remote Control

Accuracy of Calibration

Portable

Time Delay

Finger Touch

Material of Screen

Adjustable Size

Durability

Price

Electromagnetic

No Support

Accurate

Big and heavy , hard to transport and install

Long

No Support

Electromagnetic Whiteboard

No

Broken easily

Higher

Infrared

No Support

Accurate

Big and heavy , hard to transport and install

Short

Support

Infrared Receiver

No

Broken easily

Higher

Pressure Sensnive

No Support

Less

Accurate

Big and heavy , hard to transport and install

General

Support

Pressure Sensitive Whiteboard Screen

No

Broken easily

Highest

Ultrasonic

No Support

Less

Accurate

Big and heavy , hard to transport and install

General

No

Support

Any Surface

40to80

Reliable and

long-life

High

Light Sensor

Some products support (such as Easi 3D Whiteboard)

More

Accurate

Light weight, easy

to ship and install,

portable

Shorter

No

Support

Any Surface

10to200

Long

Durability

Lower

Part Eraser Erased by the effects of point

Specification of White board Software

Set up a new file: 4 kinds backgrounds available. Click button and select from the drop list :

white, black, picture or note page.

f_ Hard Pen: Writing like a ball pen

Brush Pen.

Intelligent Pen: Convert the drawing to typewriting geometric shapes.

Drawing Recognized Text Display Drawing Recognized Text Display

0 D 0 Q 0 /\ 0 0

Insert Image: Click this button, choose the files such as mp3, wav, swf, asf, rmvb, avi and insert it

into the present If saved, it will be still there when open next time.

Text Option: Click the button, drag anywhere in the page to generate a text box, and can input text through the keyboard, soft keyboard and Intelligent Pen Tools; Click the text box for a few seconds, there is a toolbar,

T function Include: "load the text file", cut, copy, paste, set the text box (like fonts, font color, background color, transparent background)Ciick this and insert the text file.

Fill Tools: Fill the geometric shapes with different colors.

Select: Select the handwriting on the page, and do "drag and zoom" operation. When it changes

into a hollow, it means the object has been selected.

Move Screen: Move geometric shapes, text and pictures

Turn Round Option: Rotate or boom on the geometry and pictures in the present page.

Pen Color Option: Set the ink color. Click the button, select the color from the list. If no desired

color, click Color List. Fluorescent Pen: Brush Traditional Pens

Tools with a translucent function, easy to make f-----------+--,---;-----=--,--------:-:-:::==--:-:-:-:-

notes, and text can still be seen.

Color Tools: When users need to fill geometry with color, click this button. The default color is

transparent, more colors available in the list.

Set Stroke Width and Line Type: Click this button and choose the line.

Eraser Option: Erase the drawings

and pictures. Three eraser modes:

Undo: Cancel the last operation.

Redo: Redo the operation just canceled by Undo.

Expansion: The present screen can be infinitely expended to any size. When the user draws a lot,

the system will automatically open the function of expansion.

Back To The Desktop: Return to the desktop.