Date post: | 04-Jun-2018 |
Category: |
Documents |
Upload: | jaspal-kumar |
View: | 231 times |
Download: | 1 times |
of 27
8/13/2019 Good Interview QandA
1/27
After Observing many interviews. Finally i come up with the following questions which are mostly asked in
all the Big companies including SAP Labs, Accenture, IBM , Deloitte , TCS , Infosys etc
1. Can we write the code both call transaction and session method in single program?
Ans. Yes it is possible to write call transaction and session in one program.
2. Which BDC you prefer?
Ans. If we want to transfer large amount of data and when we need to use more than one transaction
code we prefer session method. For small or less amount of data and for single transaction use call
transaction.
(This is more genric answer but you can add more on to this if you have worked on BDC)
3. When u prefer LSMW?
Ans. When we need to update medium amount of data we use LSMW. LSMW is also used when the
person like functional consultant has less programming language.
5. Difference between .include and .append?
Ans.
Includestructure allows to add one or more structure into structure or table.Also placed positioning
anywhere. Upto 6 include structure can be used in a table.Appendstructure can be placed only at the end of a structure or table which also stops further insertion
of fields.Only one append structure can be used
6. Preformance techniques
Ans.
1. The sequence of fields must be same as per database table
2. During writing select query write all fields in sequence as per database table.
3. Never write select statements inside loop.endloop.
4. Use st05 SQL trace, se30 run time analysis, code inspector, slin,etc.
5. Use select single * statement instead of select *
6. Always use primary key
7. Use binary search but before using binary search sort that table.
7. How to debug sapscripts ?
Ans.
Two ways to debug sapscript . first way is goto SE 71 and from menu bar select Utilities->activate
debugger .then goto SE38 execute the print program ,it automatically goes to debugging mode ..the
other way is , run the program RSTXDBUG in se 38 . execute it . a message will show that debugger is
activated .now open the print program in se 38 u vll notice that the print prgm is automatically diverted
to debugging mode.
8. What is partner selection?
Ans. This concept is mainly used in IDOC where u select the partner profile using Tcode We20 .with
Tcode SM59 you create RFC(remote function call) to create communication link to a remote system.10. What is occurs in internal table?
Ans. Occurs addition to the Declaration will give initial size to that table.occur statement allocates 8kb of
memory to the internal table.
11. What is page window?
Ans : page window is nothing but a container of a page ,which uniquely identifies a set of data for
example while creating invoice we create logo window , billing document header window , customer
window , terms and condition window etc
8/13/2019 Good Interview QandA
2/27
12. What is the difference between scrolling a table horizontally and vertically..??
Ans: In table control when you scroll a table vertically presentation server needs to call application server
to fetch the next record and display in the table while in case of horizontal scroll there is no need to call
application server.
13. What are Field Groups?
Ans: A group that combines several fields fewer than one name, at runtime, the INSERT command is
used to define which data fields are assigned to which field group are called Field Groups. It should
always be a HEADER field group that defines how the extracted data will be sorted; the fields grouped
under the HEADER field group sort the data.
14. List the events in ABAP/4 Language?
Ans: The events in ABAP/4 are load of program ,Initialization, Selection Screen, Start of Selection, End of
Selection, Top of page, Line selection, User command, End, First.
15.How the values will be passed to RFC Function module PassbyValue or Passbyreference?
Ans: always Pass by Value.
RFC is Remote Function call so it cant access the values with Pass by reference.
16. Buffering concept usage?Ans: There are three type of buffer
1 single record
2 generic buffer
3 full buffer
Buffering is use for improve performance. it improves performance 10 to 100 times more
17. Select up to 1 row and select single difference ?
Ans: Select single fetches first matching record. If more than one matching records are there then only
the first matching record will be considered other records will not be taken into account. Where as select
up to 1 rows will fetch all the matching records from the database.(Again it will assign only One Record to
the internal table/Work area)
18. What are the different buffering methods?
There are two different buffering methods
The system ensures that data transfer between the R/3 System and the database system is as efficient
as possible. To do this, it uses the following techniques:
Table buffering: The program accesses data from the buffer of the application server.
Database request buffering: Individual database entries are not read or passed to the database until
required by an OPEN SQL statement.
19. Different types of locks?
v Read lock (shared lock)
Protects read access to an object. The read lock allows other transactions read access but not write
access to the locked area of the table.v o Write lock (exclusive lock)
Protects write access to an object. The write lock allows other transactions neither read nor write access
to the locked area of the table.
v o Enhanced write lock (exclusive lock without cumulation)
Works like a write lock except that the enhanced write lock also protects from further accesses from the
same transaction.
20. CHAIN END CHAIN?
8/13/2019 Good Interview QandA
3/27
Ans: Chain and end chain are used for multiple field validation in Module pool programming .It is written
inside the screen flow logic.
21.How to Debug RFC Function module?
Ans:
SE38> Utilities> Settings> ABAP Editor> Debugging
Activate the external debugging and choose the New Debugger option in ABAP debugger.
Go to the particular place in the code and put break point, pop will appear then choose the HTTP break
point.
If you are triggering the RFC from SAP portal make sure that both the user ID should be same
If the users are different then provide the XI/Portal User ID in the users field.
22.Why sapscripts are client dependent and smartforms are client independent.?
Ans-: Smartforms create its own function module so it doesnt need to transport the request through
SCC1.As all the Development Object are stored in client independent tables. Whereas Script doesnt
generate any function module while executing so we need to transport the request number through
SCC1.Sap script is stroed in side the client depended table as a TEXT.so sapscripts are client dependent
and smartforms are client independent.23. Difference between user exit and BADIs?
Ans: User exit is for single implementation and it is procedural approach while BADIs are for multiple
implementation and object oriented approach.
Multiple implementation means Reusability because we use OOps Concepts for BADI.
24. Control break events in ABAP:-
1. AT-FIRST: This is used when we want to execute the statements before records are processed.
2. AT-LAST: This event is used when we want to execute the statements after all records are processed.
3. AT-NEW: This event is used when we want to execute the statement before group of records are
processed.
4. AT-END: This event is used when we want to execute the statements after processing of group of
records.
25.I am uploading 100 records out of which say 59th record has error so what will happen if i am
using synchronous or asynchronous method of BDC? Can we update the database using local
update mode how?
26. Suppose i am writing following code then what will be output?
LOAD-OF-PROGRAM.
WRITE:/HELLO.
Ans: HELLO
(Explain the importance of LOAD-OF-PROGRAM Event.If you dont know Tell the interviewer as this event
is used in such cases when you want to clear sum buffers or something Before calling that Program)
27. What is TMG?Ans. TMG stands for Table Maintenance generator. It is a tool available in abap by which we can add or
delete multiple records at a time and it is executed or triggered by the transaction code SM30.
28. Difference between select option and ranges ?
Ans. The main difference between select option and ranges is that ranges implicitly or automatically
creates internal table with fields like OPTION,LOW,HIGH,SIGN,etc . Where as in case of select option we
have to explicitly create internal table.
When u declares a select options it will implicitly declare an internal table (ranges) for you.
8/13/2019 Good Interview QandA
4/27
While using RANGES syntax u can declare internal table explicitly.
The only need of declaring ranges is when you r not taking input from the user but you want make limit
based selection at that time it will be use full e.g. SELECT ** from ** where MATNR in val_range.
here u can use select-option or ranges : val_range.
29. is it possible to bring select option in module pool screens?
Ans.Create a SELECT-OPTIONS in module pool screen using two methods as shown.
Method 1:-
a) Create a subscreen area in your screen layout where you want to create the select options.
b) In the top include of your module pool program declare a selection screen as a subscreen e.g.
SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
select-options s_matnr for mara-matnr.
SELECTION-SCREEN END OF SCREEN.
c) In the PBO and PAI of the main screen where the select options needs to be created do a call
subscreen of the above screen (100).
CALL SUBCREEN sub_area INCLUDING
This CALL SUBSCREEN statement is necessary for transport of values between screen and program.Note: All validations of the selection screen fields e.g. the s_matnr field created above should be done in
selection screen events like AT SELECTION-SCREEN etc and not in PAI. These selection screen
validations etc should be done in the top include only.
Method 2:-
a) Create 2 separate fields in your screen layout one for the low value and one for the high value. Insert
an icon beside the high value which will call the multiple selections popup screen on user command. Use
function module COMPLEX_SELECTIONS_DIALOG to achieve this.
continued
struc_tab_and_field-fieldname = con_cust. KUNNR
struc_tab_and_field-tablename = con_kna1. KNA1.
CALL FUNCTION COMPLEX_SELECTIONS_DIALOG EXPORTING*
TITLE =
text = g_titl1 Customers
tab_and_field = struc_tab_and_field
TABLES RANGE = rng_kunnr
EXCEPTIONS
NO_RANGE_TAB = 1
CANCELLED = 2
INTERNAL_ERROR = 3
INVALID_FIELDNAME = 4OTHERS = 5.
IF NOT rng_kunnr[] IS INITIAL.
* Read the very first entry of the range table and pass it to
* dynpro screen field
*READ TABLE rng_kunnr INDEX 1.
IF sy-subrc = 0.
8/13/2019 Good Interview QandA
5/27
g_cust = rng_kunnr-low.
ENDIF.
ENDIF.
You can use the return table rng_kunnr to populate your own internal range table with the values entered
by the user. Basically here you are just simulating the work of a select-options parameter by module pool
screen elements.
30.how we can retrive data using secondary index.explain with simple example
Ans: First create secondary indexes on required fields of a particular database table.
We can create one primary index and 15 secondary indexes.Once the respective secondary indexes are
created write select queries and within select queries specify secondary indexes field name with where
clause.
31.How can we handle table control in BDC?
Ans.We can handle table control using line index
Line index indicates which line of Table control is to be use for BDC transaction
Ex -
perform bdc_field using RC29K-AUSKZ(01)Indicates 1st line of table control is going to be used for transaction which is Line index of Table Control
32. If i want to execute a BDC program only in background not in foreground is there any option
for this?
Ans.The sm37 transaction can be used for running a program in the background. Also in the session
method while processing the session you can specify the processing type as background or foreground.
33.How Can We upload a text file having Delimiters in to Legacy System
Ans.For up loading text file we use the pre-defined FM gui_upload. in that FM we have the parameter
has_field_seperator for that we assign the default delimiter x.
HAS_FIELD_SEPERATOR X
X can provide the Whatever delimiter we used in flat file for separation.
34. What is the land scape in sap.
Ans. In every organisation sap landscape involves three servers viz, Development server, Quality server
and Production server. Whatever new development we do as per clients requirement is done in
development server. Later to test the developed object we move it to quality server for testing and finally
once everything goes clear then the object is moved to production server ,production server data is ready
for final business use.
35. Workbench request are client dependent or client independent
Ans. Workbench request are client independent.
(Common Man Workbench request holds the Program , FM etc. How it can be Client Dependent!!!!)
36. Tell me about workbench request and customization requests.
Ans.Workbench (ABAP Dev) request is client independent when you import it into one system it reflact itin all client in same system, but customized request has to import in that client perticular client where it is
created, actually it is client dependent.
Other Interview questions
SAP SCRIPTS & FORMS
1. Can we write the code/program inside sap script?
2. How will u create sapscripts & smartforms in multiple language?
3.How to execute sap script & smart forms in Background?
8/13/2019 Good Interview QandA
6/27
4.How to do total & subtotal in scripts & forms?
=================================================
DATA DICTIONARY
1.Apart from .include & .append how will u do table enhancement?
2.what r the events of table maintainence generator?
3.what will happen if i use projection view and maintainence view together?
4. I created ZEMP table now i want to add more data but prev. data should not disturb how can i do this?
=====================================================
REPORTS
1.How will u print footers in alv report?
2.How will u edit fields from output list of alv?
====================================================
BDC
1.what r the fields u took during recording for mmo1,me21n?
2.If u want to do bdc for xd01 explain me how will be the flow?
=================================================user exits
1.what r enhancement points?
2.How to write customer exits?
3.what is routine? how it is different from user exits?
Most frequently asked Differences in ABAP interview1.sapscript and smartforms
Sap script is client dependent and smart form is client independent.
Smartforms has Only 1 main window while Sap script has 99 main windows
You can not print labels using smart forms
2.BDC and LSMW
In BDC we have to take care of field mapping whereas field mapping is taken care by sap in lsmw.
BDC is mostly used for customised data upload while LSMW is used for uploading Master data.
In BDC we need to write large code but in LSMW small coding is needed.
3. BADI and BAPI
BADI is business add ins, it is used to customize the standard business flow
BAPI is Business application programming interface. It is nothing but Remote enabled function
module which can be called from outside the SAP System.
4.user exit and customer exit
User exit is an include program given by SAP in that you can write your code , It needs Access keyfrom SAP while key is not required in case of customer exit
5. Select single and select up to one row
Select single will fetch only one record while select up to n row. Will fetch n rows from database
6. Normal (Classical) report and ALV report
To display the output in classical report you use WRITE Statement.
8/13/2019 Good Interview QandA
7/27
To display the output in ALV we have different function modules and class like
REUSE_ALV_GRID_DISPLAY , REUSE_ALV_LIST_DISPLAY and CL_SALV_TABLE.
If you run the classical report in background after JOB finished you can see its output which stored
in spool, While in case of ALV you need code extra to store the output as it will not generate the
spool.
7. ALV list display and ALV grid display
You cannot retrieve the output for the report which is displayed using ALV GRID Display.As spool
Request will not be created for the same. While in case of list display Report out put will be there in
spool request.
8. Classical and drill down report
In classical report user cannot interact with report whereas in drill down report user can interact
with report.
Drill down facility is not provided in classical report while in drill down it is provided.
If they ask you in detail then tell the interviewer that interact with the report means in drill down
report we have one basic list and 20 secondary lists so we can directly go to 5th list or 10th list as
per our requirement similarly we can come back to any list. Drill down means showing data in basic
list first and when we double click on any field we get summarised list. NOTE:- to go to next list in
drill down report use following syntax SY-LSIND = < list number> example: to go to 15th list SY-
LSIND = 15 to come to 5th list from 15th list use F3 KEY OR PRESS BACK BUTTON
9. BAPI and RFC function module
BAPI is nothing but remote enabled function module
BAPI is provided as a method of business objects
10.sap 4.7 and ECC 6.0
SAP 4.7 is based on Web AS
ECC 6.0 is based of Netweaver 7.0.
11. get cursor and hide in interactive report
Get cursor will provide the location cursor position in the report
While hide is use to pass the data from basic list to secondary list
12.normal function module and RFC
You cannot call normal function module from outside the current system while RFC function
module can be called from outside the SAP system.
13. Subroutine and function modules. Subroutine is local to the program while function module is global.
To call subroutine from outside its main program you need to write its main program name in the
bracket
14.At selection screen and At selection screen output.
At selection screen output is called first
All dynamic commands and screen modification is done in AT selection screen output.
8/13/2019 Good Interview QandA
8/27
15.direct input and batch input
The basic difference is validation is not done in direct input by pre defined function while in batch
input it is coved.
16.synchronous and asynchronous in BDC
Synchronous mode will wait until the BDC session gets over while asynchronous mode will not waitfor that
17.at selection screen and at selection on field name
At selection screen is used to validate the whole screen elements while at selection field is used to
validate the particular field.
When you display the error message in at selection on field the focus will be on that particular field
while in case of At selection screen the focus will not be on any particular field.
18. PBO and PAI event in module pool
Process Before Output and Process after input.
PBO will be called before the screen is displayed to the user while process after input is calledonce user interact with screen.
19. Stop , check and exit
If you use the STOP statement within an event block, the system stops processing the
block Immediately.
If you use the EXIT statement within an event block but not in a loop, the system
stops Processing the block immediately
If you use the CHECK statement within an event block but not within a loop, and
the Condition is not fulfilled, the system exits the processing block immediately. can
be any logical expression or the name of a selection table. If you specify a selection table and the
contents of the corresponding table work are do.
8/13/2019 Good Interview QandA
9/27
20.free and refresh in internal table
You can use FREE to initialize an internal table (along with header line ) and release its memory
space.
REFRESH will only initialize an internal table (along with header line)
21.clear and delete.
The major difference is clear is used with internal table while delete is used with database table.
22. collect and sum COLLECT INTO . The statement first checks whether the internal table contains an
entry with the same key. If not,it acts like INSERT. If there is already a table entry with the same
key, COLLECT does not inserta new line. Instead, it adds the values from the numeric fields of the
work area to thevalues in the corresponding fields of the existing table entry.
8/13/2019 Good Interview QandA
10/27
SUM.Can only be used in loops through internal tables. Calculates the sums of the numeric fields
in alllines of the current control level and writes the results to the corresponding fields in the
workarea.
23. call transaction and session method
Call transaction is Synchronous Processing while session (classical) method is Asynchronous
Processing
In call transaction we can update the database both synchronously and asynchronously. We can
specify the mode in the program. While in session method it is Synchronous Database update.
In call transaction No batch input processing log is maintained while in session method details log
is maintained.
Call Transaction method is faster than the session method.
24. at first and at last control break event
As the name suggest AT FIRST executed for the first time while AT LAST executed in last.
25. Enhancement point and Enhancement Section Both the enhancement-point and section are available for you to change standard SAP code.
Difference is in fact that you use Enhancement-point to add ABAP code to standard SAP and
enhancement-section to replace/extend standard SAP code.
26.end of page and top of page
Top of page trigger when report encounter the first write, skip or new-line statements.
End of page trigger when page size is over or report display gets over.
27. Table and structure
Table has physical definition into the underline database while structure does exist physically in the
data base.
28. table and views
Table has data init while view does not contain data in it. Both exist in the data base. when u run
the view it queries the database and gives the respective data.
29.inner joins and for all entries
Inner join joins the table at database level whereas For..All..Entries joins the table at application
level.
In For..All..Entries when the condition gets satisfied data is fetched in one single shot from
database table whereas in inner join data is fetched iteration by iteration
It is always good programming practice to join tables at application level because if we join tables
at database level then there might be performance issue
30. Transparent table pool table and cluster table
Transparent Table: Exists with the same structure both in the dictionary and database exactly with
same data and fields. its to store transaction data. Its one to oneRelation table
Pool tables: These are logical tables must be assigned to a table pool when they are defined. Its
use to store control data. its many to one relation table
8/13/2019 Good Interview QandA
11/27
Clustered tables: these also logical tables and must be assigned to table cluster when they are
defined. Its also used to store control data, temporary data or text ex., documentation. Its also
many to one relation table.
31. Top of page and top of page during line selection
Top of page is triggered for the basic list while top of page at line selection triggers at secondary
list.
32. Start_form and End_form in sap script
start_form function module is called if we want to use different forms with similar characteristics in
a single spool request ,it must be closed by END_FORM function module
33. open dataset and close dataset
Open dataset is use to read / write file into application server while close dataset is use to close
that file.
34. data element and domains
Domain gives technical details like length , decimal etc..while data elements gives description and
business details
35. set screen and call screen
Set screen set the next screen value and temporarily override the next screen value in
screen attribute. While call screen jump to the screen specified in .
36. Internal Session and External Session
External session is nothing but the window you have opened in your screen .By Default you can
open 6 external sessions( 6 windows = you can increase it via basiss setting). Internal session is
created when you call any Functional module or any other task in your program. counts for internal
sessions are 9.
37. Elementary and collective search help An Elementary Searchhelp defines the flow of a standard input help. It is composed of a
selection method that defines where to get the data that will make up the hit list, An interface
consisting of search help parameters that define the exchange of data between the screen and the
selection method and a dialog type that controls how the hit list will be displayed.
A Collective Searchhelp is a combination of several elementary search helps giving the user a
different search paths. The interface parameters of the elementary search help are assigned to the
parameters of the collective search.
38. What is the difference between Clustered Tables and Pooled Tables?
A pooled table is used to combine several logical tables in the ABAP/4 dictionary. Pooled tables
are logical tables that must be assigned to a table pool when they are defined.
Cluster table are logical tables that must be assigned to a table cluster when they are defined.
Cluster table can be used to store control data they can also used to store temporary data or text
such as documentation.
39. user exits and customer exit.
User exit is sap defined includes so to modify it we need key from SAP.while customer exit like
function exit , screen exit we dont need any key.
8/13/2019 Good Interview QandA
12/27
40. sapscript smart forms and adobe forms
Sapscript is client dependent whereas smartform is client independent.
Main window is compulsory in scripts whereas main window not compulsory in form.
Smartform output can be seen in web while in scripts it is not possible.
smartform generates function module while scripts dont generate function module.
41. screen and subscreens in module pool.
Screen has its own gui status while subscreen does not have any gui status.Subscreens are part
of main screen.
42. standard table and hashed tables.
Standard table can be accessed by key as well as index while You can only access hashed tables
by specifying the key. The system has its own hash algorithm for managing the table.
ABAP Interview Questions : The Massive ListImportant
Question 1:What is the difference between User Exit and Function Exit?
User Exit Customer Exit
User exit is implemented in the form of a
Subroutine i.e. PERFORM xxx.
Example: INCLUDE MVF5AFZZ PERFORM userexit_save_document_prepare.
A customer exit can be implemented as:
Function exit
Screen Exit Menu Exit
Field Exit
Example: CALL Customer function xxx
INCLUDE xxx.You modify this include.
In case of a PERFORM, you have access to
almost all the data. So you have better control,
but more risk of making the system unstable.
You have access only to the importing,
exporting, changing and tables parameter of
the Function Module. So you have limitedaccess to data.
User exit is considered a modification and not
an enhancement.
A customer exit is considered an enhancement.
You need Access Key for User Exit. You do not need access key.
Changes are lost in case of an upgrade. Changes are upgrade compatible.
User exit is the earliest form of change optionoffered by SAP.
Customer exits came later and they overcomethe shortcomings of User Exit.
No such thing is required here. To activate a function exit, you need to create aproject in SMOD and activate the project.
What is the difference between RFC and BAPI?
BAPI RFC
8/13/2019 Good Interview QandA
13/27
Just as Google offers Image/Chart/Map APIsOR Facebook offers APIs for Comment/Like,SAP offers APIs in the form of BAPIs. BAPI is
a library of function modules released by SAP
to the public so that they can interface with
SAP.
RFC is nothing but a remote enabled functionmodule. So if there is a Function Module inSAP system 1 on server X , it can be called
from a SAP system 2 residing on server Y.
There is a Business Object Associated with a
BAPI. So a BAPI has an Interface, Key Field,
Attributes, Methods, and Events.
No Business Object is associated with a RFC.
Outside world (JAVA, VB, .Net or any Non
SAP system) can connect to SAP using a
BAPI.
NonSAP world cannot connect to SAP using
RFC.
Error or Success messages are returned in aRETURN table.
RFC does not have a return table.
Question 3:What is the difference between SAPSCRIPT and SMARTFORM?
SAPSCRIPT SMARTFORM
SAPSCRIPT is client dependent. SMARTFORM is client independent.
SAPSCRIPT does not generate any Functionmodule.
SMARTFORM generates a Function Modulewhen activated.
Main Window is must. You can create a SMARTFORM without a
Main Window.
SAPSCRIPT can be converted toSMARTFORMS. Use Program
SF_MIGRATE.
SMARTFORMS cannot be converted toSCRIPT.
Only one Page format is possible Multiple page formats are possible.
Such thing is not possible in SCRIPT. You can create multiple copies of aSMARTFORM using the Copies Window.
PROTECT ENDPROTECT command is
used for Page protection.
The Protect Checkbox can be ticked for Page
Protection.
The way SMARTFORM is developed and the way in which SCRIPT is developed is entirely different. Not
listing down those here. That would be too much.
Question 4:What is the difference between Call Transaction Method and the Session method ?
Session Method Call Transaction
Session method id generally used when the
data volume is huge.
Call transaction method is when the data
volume is low
8/13/2019 Good Interview QandA
14/27
Session method is slow as compared to Calltransaction.
Call Transaction method is relatively fasterthan Session method.
SAP Database is updated when you processthe sessions. You need to process the
sessions separately via SM35.
SAP Database is updated during theexecution of the batch input program.
Errors are automatically handled during theprocessing of the batch input session.
Errors should be handled in the batch inputprogram.
Question 5:What is the difference between BDC and BAPI?
BAPI BDC
BAPI is faster than BDC. BDC is relatively slower than BAPI.
BAPI directly updates database. BDC goes through all the screens as a normal
user would do and hence it is slower.
No such processing options are available inBAPI. Background and Foreground processingoptions are available for BDC.
BAPI would generally used for small datauploads.
BDCs would be preferred for large volumesof data upload since background processing
option is available.
For processing errors, the Return Parameters
for BAPI should be used.This parameterreturns exception messages or success
messages to the calling program.
Errors can be processed in SM35 for session
method and in the batch input program forCall Transaction method.
Question 6: What is the difference between macro and subroutine?
Macro Subroutine
Macro can be called only in the program it is
defined.
Subroutine can be called from other programs
also.
Macro can have maximum 9 parameters. Can have any number of parameters.
Macro can be called only after its definition. This is not true for Subroutine.
A macro is defined inside:DEFINE
.
END-OF-DEFINITION.
Subroutine is defined inside:FORM ..
..
ENDFORM.
Macro is used when same thing is to be done in
a program a number of times.
Subroutine is used for modularization.
Question 7:What is the difference between SAP memory and ABAP memory?
8/13/2019 Good Interview QandA
15/27
SAP Memory ABAP Memory
When you are using the SET/GET Parameter
ID command, you are using the SAP Memory.
When you are using the EXPORT IMPORT
Statements, you are using the ABAP Memory.
SAP Memory is User Specific.
What does this mean?The data stored in SAPmemory can be accesses via any session from aterminal.
ABAP Memory is User and Transaction
Specific.What does this mean? The datastored in ABAP memory can be accessed onlyin one session. If you are creating another
session, you cannot use ABAP memory.
Important
Question 8:What is the difference between AT SELECTION-SCREEN and AT SELECTION-SCREEN
OUTPUT?
AT SELECTION-SCREEN is the PAI of the selection screen whereas
AT SELECTION-SCREEN OUTPUT is the PBO of the selection screen.
Question 9:What is the difference between SY-INDEX and SY-TABIX?
Remember it this way TAB IX = Table.So when you are looping over an internal table, you use SY-TABIX.
When you use DO ENDDO / WHILE for looping, there is no table involved.
So you use SY-INDEX.
For READ statement, SY-INDEX is used.
Question 10:What is the difference between VIEW and a TABLE?A table physically stores data.
A view does not store any data on its own. It can contain data from multiple tables and it just
accesses/reads data from those tables.
Question 11:What is the difference between Customizing and Workbench request?A workbench
request is client independent whereas a Customizing request is client dependent.
Changes to development objects such as Reports, Function Modules, Data Dictionary objects etc. fall
under Workbench requests.
Changes in SPRO / IMG that define system behavior fall under customizing requests.
An example would be defining number ranges in SPRO.
In short, generally a developer would end up creating a Workbench request and a Functional Consultant
would create a Customizing request.
Question 12:What is the difference between PASS BY VALUE and PASS BY REFERENCE?These
concepts are generally used for Function modules or Subroutines etc. and their meaning can be taken
literally.
Say we are passing a variable lv_var:
CALL FUNCTION DEMO_FM
EXPORTING
VAR = lv_var.
8/13/2019 Good Interview QandA
16/27
When we PASS lv_var by VALUE , the actual value of lv_var is copied into VAR.
When we PASS lv_var by REFERENCE , the reference or the memory address of lv_var is passed to the
Function module. So VAR and lv_var will refer to the same memory address and have the same value.
Question 13:What is the difference between Master data and Transaction data?Master data is data
that doesnt change often and is always needed in the same way by business.
Ex: One time activities like creating Company Codes, Materials, Vendors, Customers etc.
Transaction data keeps on changing and deals with day to day activities carried out in business.
Transactions done by or with Customers, Vendors, and Materials etc. generate Transaction Data. So data
related to Sales, Purchases, Deliveries, Invoices etc. represent transaction data
Some important transactions here for Master Data:
Material: MM01 MM02 MM03
Vendor: XK01 , XK02 , XK03
Customer: Xd01 , XD02 , XD03
Some Important transactions for Transaction data:
Purchase Order: ME21n , ME22n , ME23n
Sales Order: VA01 , VA02 , VA03Goods Receipt: MIGO
Invoices: MIRO
Important
Question 14:What will you use SELECT SINGLE or SELECT UPTO 1 ROWS ?
What will you use SELECT SINGLE or SELECT UPTO 1 ROWS ?
There is great confusion over this in the SAP arena.
If you Google, you will see lots of results that will say SELECT SINGLE is faster and efficient than
SELECT UPTO 1 ROWS.
But that is 100% incorrect.
SELECT UPTO 1 ROWS is faster than SELECT SINGLE.
If for a WHERE condition, only one record is present in DB, then both are more or less same.
However, If for a WHERE condition multiple records are present in DB, SELECT UPTO 1 ROWS will
perform better than SELECT SINGLE.
Question 15:What is the difference between .Include Structure and .Append structure?
I have seen ridiculous answers for this at many places on the Web.
The true answer is this:
Lets say you want to use the Structure X in your table Y.
With .Include X, you can include this structure in multiple tables.
With .Append X, you specify that structure X has been used in table Y and that this cannot be used in
any other table now. So you restrict structure X only to Table Y.Important
Question 16:Can you describe the events in ABAP?
LOAD-OF-PROGRAM:
INITIALIZATION:If you want to initialize some values before selection screen is called
AT SELECTION SCREEN OUTPUT:PBO for Selection Screen
AT SELECTION SCREEN:PAI for Selection Screen
START-OF-SELECTION
8/13/2019 Good Interview QandA
17/27
END-OF-SELECTION
TOP-OF-PAGE
END-OF-PAGE
AT USER-COMMAND:When user click on say buttons in application toolbar. SY-UCOMM
AT LINE SELECTION:Double click by user on basic list. SY-LISEL
AT PF##:When User Presses any of the Function Keys
TOP-OF-PAGE DURING LINE SELECTION
Question 17:
What events do you know in Module Pool Programming?
PBO:you know this . If not you should know this . Thats basic.
PAI:You know this. If not you should know this . Thats basic.
POV:Process on Value request i.e. when you press F4.
POH:Process on help request i.e. when you press F1.
Question 18:Can you show multiple ALVs on a Single Screen?
Yes, there are multiple ways of doing this:
If you are using OOALV, you can create multiple custom containers(cl_gui_custom_conta iner)& put an ALV control (cl_gui_alv_grid)in each of those.
You can even use a Splitter container control and place multiple ALVs in each of
the split container.
If you are using Normal ALV, You can use the following FMS:
1. REUSE_ALV_BLOCK_LIST_INIT
2. REUSE_ALV_BLOCK_LIST_APPEND
3. REUSE_ALV_BLOCK_LIST_DISPLAY
Question 19:A system has two clients 100 and 500 on the same application server. If you make
changes to a SAPSCRIPT on client 100, will the changes be available in client 500?
No. SAPSCRIPT is client dependent. You will have to transport changes from client 100 to client 500.However, for SMARTFORMS, Changes will be made both for client 100 and client 500.
Question 20:There are 1000s of IDOCs in your system and say you no longer need some of them? How
will you get rid of those IDOCs?
One way is to archive the IDOCs using transaction SARA.
But what the interviewer was expecting was How do you change IDoc Status?
There are different ways of doing this:
A) Use FM IDOC_STATUS_WRITE_TO_DATABASE
B) USE FMs:
EDI_DOCUMENT_OPEN_FOR_PROCESS and
EDI_DOCUMENT_CLOSE_PROCESS
Question 21:What is the difference between CHAIN ENDCHAIN and FIELD commands in Module
Pool?
If you want to validate a single field in Module Pool, you use the FIELD Command.
On error, this single filed is kept open for input.
8/13/2019 Good Interview QandA
18/27
If you however want to validate multiple fields, you can use the CHAIN ENDCHAIN command. You
specify multiple fields between CHAIN and ENDCHAIN.
On error, all fields between CHAIN ENDCHAIN are kept open for input.
Question 22:What are the types of Function Modules? What is an UPDATE function
module?There are three types of Function Modules: Normal , RFC , UPDATE.
The aim of the Update function module is either to COMMIT all changes to database at once or to
ROLLBACK all the changes. By definition, an update function module is used to bundle all the updates in
your system in one LUW (logical unit of work).
This FM is called whenever COMMIT WORK statement is encountered in the calling program and the
way you call it is CALL FUNCTION XXX IN UPDATE TASK.
Have a look at FM EDI_DOCUMENT_CLOSE_PROCESS_UPD and do a where used.
This FM is used as Update FM in case you make changes to IDoc contents/status via your program.
Question 23:How is the table sorted when you do not specify field name and Ascending or Descending?
On what criteria will the table be sorted? Do internal table have keys?
Yes, internal table have keys.
The default key is made up of the non-numeric fields of the table line in the order in which they occur.Question 24:Explain what is a foreign key relationship?Explain this with the help of an example.
Lets discuss about tables EKKO (PO header) and EKPO (PO line item).
Can you have an entry in table EKPO without having an entry in table EKKO?
In other words can you have PO line items without the PO header?
How does this happen? The answer is foreign key relationship.
So foreign keys come into picture when you define relationship between two tables.
Foreign keys are defined at field level.
Check the foreign key relation for field EBELN of table EKPO.
The check table is EKKO. This just means that whenever an entry is made in EKPO, it is checked
whether the entered value for EBELN already exists in EKKO. If not, entry cannot be made to EKPO
table.
Question 25 : What is the difference between a value table and a check table?Check table is
maintained when you define foreign key relationships.
For Check table, read question above.
.
Value table is defined and maintained at a domain level.
At a domain level, you can mention allowed values in the form of:
1) Single values
2) Ranges
3) Value tableFor example, have a look at domain SHKZG. Only allowed values are S and H for
Debit/Credit indicator. Whenever and wherever you use this domain, the system will force you to use onlythese two values: S and H.
Another example is domain MATNR. For this domain the value table is MARA.
So whenever and wherever, you use this domain the system will force you to use values for MATNR in
table MARA.
Question 26: How do you find BAPI?Approach1:
You can go to Transaction BAPI and then search for your desired object.
8/13/2019 Good Interview QandA
19/27
Say you want to find a BAPI for creating users in the system, in such case you can search for the User
and find the relevant BAPIs.
Approach2:
Another way is to find a Business Object. Say you want to find a BAPI for creating Material in SAP and
you know the BO for Material is BUS1001006. You can go to Transaction SWO1 and enter the BO
BUS1001006 in the BOR. Then have a look at the methods for this BO.
Important
Question 27:How do you find BADI?
Approach1:
Go to ClassCL_EXITHANDLER in SE24 > Put a breakpoint in method GET_INSTANCE.Now go and
execute your transaction code for which you want to find BADI.
You will find the BADI in the changing parameter exit_name:
Approach 2:
Go to Tcode SE84 Enhancements BADIs Definitions.Find the package for the Tcode for which you are finding the BADI.
Enter it as shown and hit execute:
Are we done yet ? Definitely not !
Let the questions come and lets keep on updating this blog.
I will update the blog with the following questions soon:
Question:Synchronous and asynchronous methods in BDC ?
Question:What is the difference between inner joins and outer joins?
Question:What is the difference between INSTANCE methods and STATIC methods?
Question:What is the difference between Implicit Enhancements and Explicit Enhancements?
Question:What is the difference between Enhancement point and Enhancement Section?
Question:How do you find Function Exit?
Question:How do you activate a Function Exit?
SAP ALE IDocs interview questions and answers
ALE IDocs in SAP
ALE IDocs in SAP is a lot about configuration and a lot about Tcodes . So if you have worked on at least
one end to end scenario in ALE IDocs in SAP , you probably already have answers to a lot of
questions.
Cheers!!
But if you havent , make sure you do this exercise. There are plenty of step by step guides to ALE IDocs
available on the internet . Make sure you read one understand it all the way . Sending IDoc from client
800 to say client 810 on the same server is easy . If possible ,Try an exercise in which you send an IDoc
from one system to another system.
Lets get started . Hope you get some value in these pages
8/13/2019 Good Interview QandA
20/27
Question 1: What is ALE ?
ALE stands for Application Link Enabling. As its name indicates , it links two systems.
ALE is a technology that can enable exchange of data between two different Systems ( SapSap OR
SapNon Sap). ALE technology enables distributed yet integrated installation of SAP systems.
ALE architecture comprises of 3 layers :
Application layerrefers to the application data ( SD , MM , FI or data for any SAP application ) . In this
layer the data is collected to be distributed and then sent to the distribution layer.
Distribution layerdetermines to whom should the data generated by the application layer has to be
distributed i.e. it is in the distribution layer that the recipient is determined , the data is formatted or filtered
and then an actual is created.
Communication layertakes the responsibility of delivering the Idoc to the receiving system and
communicates to the receiving system via tRFC , File ports , FTP or TCP/IP etc.
ALE uses IDoc as a vehicle to transfer data between two systems.
Question 2: What is EDI ?
EDI stands for Electronic Data Interchange. It refers to the electronic exchange of business data in
a structured formatbetween two systems. The EDI subsystem generally converts the Idoc data into oneof the many EDI formats and generates an EDI file in an X12 format. The middleware then translates the
X12 file to an IDOC format and the IDOC is sent to the SAP system.
Question 3: What is an Idoc? What is IDoc Type? What is an IDoc Extension ?
An IDoc (Intermediate document) is a vehicle that is used to transfer data from one system to another.
IDoc is not a technology of some sort , but it is just a container that holds data .
It holds data in a structured format i.e. in the Fields of the Segments.
IDoc Type vs. IDoc:
An IDoc Type is nothing but a collection of one or more structures defined in a system with specific fields.
It does not hold Data.
However, an IDoc is something that holds the values in the fields of the structure defined by IDOC type.
The transaction code to view an IDoc type (Basic and extension) is WE30.
Examples:ORDERS04, DEBMAS04, MATMAS04, CREMAS04.
These are all SAP standard Basic IDoc Types.
You can even have an IDoc extensionin which you can use the existing Basic IDoc type and add extra
segments and fields to it. Usually we extend an IDoc when the standard SAP IDoc type is not able to
cater to the business process.
Question 4: What are the types of records in SAP ALE Idocs and where is this information stored ?
There are three types of records in SAP ALE Idocs:
Control Records:Control record information for an IDoc is stored in standard table EDIDC.
Data Records: Control record information for an IDoc is stored in standard table EDIDD.
Status Records: Control record information for an IDoc is stored in standard table EDIDS.Question 5: What is an Idoc status? What are the different types of Idoc statuses that you know ?
When an IDoc is sent from one system to another , it goes through variuos stages.The IDoc status
indicates the stage that the Idoc in currently in.
There about 75 IDoc statuses.There is no way you can remember those all .
Dont even try to ! You will probably remember only those on which you have worked .
But here are a few that you should know:
0-49indicates an Outbound IDoc and 50-75as Inbound IDoc.
8/13/2019 Good Interview QandA
21/27
01 IDoc generated
02 Error passing data to port
03 Data passed to port OK
51 Application document not posted
52 Application document not fully posted
53 Application document posted
Question 6: What is a Port ? What are the types of Ports ?
A port is a communication channel through which Messages can be sent or received in SAP .
The sender and the receiver both specify the port through which they will communicate.
The common port types are the TRFC Port and the File Port.
If both sender and receiver mention TRFC ports, data is exchanged via RFC connections.
If however , a file port is mentioned , the IDOC is written in a flat file at the specified location at the sender
system.Then a FTP transfer should be done from that location to the receiver system or a Middleware
that will send the file to the receiver system.
The transaction to maintain ports is WE21.Question 7: What is a Message type and Idoc Type ? What is the difference between Message type and
an IDoc type?
A Message type and an IDoc type are closely related . In fact, you will f ind that a Message type is always
associated with an IDoc type.Whereas an IDoc type is a detailed version with all the segments and fields ,
a Message type is used just to specify the kind of information that a system can send or receive to or from
another system.
So If system SAP1 has a Partner Profile where it specifies MATMASas an outbound message type , it
just means that SAP1 can send material master data to say system SAP2.
If system SAP1 has a Partner Profile where it specifies MATMASas an inbound message type , it just
means that SAP1 can receive material master data from say system SAP2.
What all fields can be sent and received will be specified in the IDoc type.
Some other message types: DEBMAS( Customers), CREMAS(Vendors) belong to the Master data.
The link between a message Type and an IDoc type is maintained in Tcode WE82.
Question 8: What is a partner profile ? What are the types of partner profiles ?
To be able to communicate with a partner via an IDoc interface, each system needs to maintain a partner
profile. A partner profile is a mechanism by which the system can specify what kind of messages
(message types) it can send or receive.
Partner profiles can be maintained in WE20.
Question 9: What is a distribution model in ALE IDocs ?
The distribution model describes how ALE messages flow between different logical systems.
You can mention the sender and receiver logical systems, the message type to be distributed and alsodistribute data(IDocs) based on certain conditions by using the distribution model.
The ALE layer uses the distribution model to control which systems will receive the information(IDocs)
and also filter the data based on certain conditions.
Distribution Models can be created and maintained in transaction BD64.
Question 10: What are process codes ?
I dont want to make this post too big . So, I will stop here for the time being.
8/13/2019 Good Interview QandA
22/27
More interview questions on ALE IDocs :
Question 11:How do you read data from an IDoc in a program ?
Question 12:How do you send Idoc from a program ?
Question 13:How do you achieve filtering in a distribution model ?
Question 14:Can I create a flat file from an IDOC ? If Yes , How ?Question 15:You want to create and send an IDOC to another the moment a PO is created in
your system . How will you achieve this ?
Question 16:How to Reprocess Idocs in SAP?
Question 17:What is a change Pointer?
Question 18:What is serialization of Idocs?
Question 19:Important tcodes in ALE Idocs.
Question 20:Important programs in ALE Idocs:
BDC Interview Questions
What is BDC and why do we use BDC ?
BDC ( Batch Data Communication ) also known as batch input is a technique by which large volumes of
data can be transferred from Non Sap or Legacy systems to SAP systems.
Example: A Legacy system that is to be replaced by SAP has say 1000 Customers , 2000 vendors and
3000 materials. All this data needs to be transferred to SAP . In such cases , We can use BDC.
If the old system is replaced by SAP, such a transfer is called Conversion.
If the old system runs along with SAP, in that case the transfer is called an Interface.
The two methods for BDC are:
Session Method
Call TRANSACTION Method
CALL DIALOG (Outdated)
ABAP interview questions on BDC:
Important:
Question 1:What is the difference between Call Transaction Method and the Session method ?
Session Method Call Transaction
8/13/2019 Good Interview QandA
23/27
Session method id generally used when thedata volume is huge.
Call transaction method is when the datavolume is low
Session method is slow as compared to Calltransaction.
Call Transaction method is relatively fasterthan Session method.
SAP Database is updated when you processthe sessions. You need to process thesessions separately via SM35.
SAP Database is updated during theexecution of the batch input program.
Errors are automatically handled during the
processing of the batch input session.
Errors should be handled in the batch input
program.
Important:
Question 2:How do you do BDC for a table control?With other things as usual, there is a special trick
that you have to use while doing BDC for table control.
You need to use the BDC OKCODE =P+.
Its the BCD_OKCODE for Page down that can be used for scrolling down in table control.
Important:
Question3: Is there any method apart from BDC for data upload to SAP?Apart from BDC and
LSMW, you can use BAPIsto upload data into SAP.
BAPIs should be preferred over BDCs, because they process data faster than BDC.
A BAPI is faster since it updates Database directly. Whereas BDC calls transaction and goes through
the whole screen sequence as any user would do.
BAPI BDC
BAPI is faster than BDC. BDC is relatively slower than BAPI.
BAPI directly updates database. BDC goes through all the screens as a normal
user would do and hence it is slower.
No such processing options are available inBAPI.
Background and Foreground processingoptions are available for BDC.
BAPI would generally used for small data
uploads.
BDCs would be preferred for large volumes
of data upload since background processingoption is available.
For processing errors, the Return Parameters
for BAPI should be used.This parameter
returns exception messages or success
messages to the calling program.
Errors can be processed in SM35 for session
method and in the batch input program for
Call Transaction method.
Question 4:How do you process errors in Call Transaction method ?
Lets have a look at the syntax for CALL TRANSACTION method.
Sample code:
DATA: BEGIN OF G_T_MESSTAB OCCURS 0.
INCLUDE STRUCTURE BDCMSGCOLL.
DATA: END OF G_T_MESSTAB.
8/13/2019 Good Interview QandA
24/27
CALL TRANSACTION MB11
USING G_T_BDCDATA
MODE E
UPDATE S
MESSAGES INTO G_T_MESSTAB.
All the error messages will be trapped inside G_T_MESSTAB.
Question 5:What is the use of program RSBDCSUB?
There are two ways to process the BDC sessions:
1) Go to SM35 > Choose session > hit process.
Now See Question no. 10.
2) Use program RSBDCSUB.
RSBDCSUB schedules the session to be processed in background.
Lets take an example to understandthis.
The sessions are created at one point of time and processed at other point of time and this may create a
problem: For example:a BDC program creates a session for updating 1500 customers in SAP. However
, before this session is processed via SM35 , a user inserts 100 customers in the system manually. In this
case , the session will have at least 100 errors when the session is processed from SM35.
One way to avoid this is to use the program RSBDCSUB in the batch input program itself so that the
session is processed as soon as it is created.
RSBDCSUB schedules the session to be processed in background.
Question 6:What is the structure of the BDC table?The BDCDATA consists of the following fields:
PROGRAM [CHAR 40]Online program name.
DYNPRO [NUMC 4]Screen number.
DYNBEGIN [CHAR 1]Flag to indicate the start of a new screen.
FNAM [CHAR 132]Field name of a screen field to be filled with data. FVAL [CHAR 132]The actual value to be filled into the specified screen field.
Sample Screenshot:
8/13/2019 Good Interview QandA
25/27
BDCDATA table structure
Question 7:What is the difference between BDC_OKCODE and BDC_CURSOR?
BDC_OKCODE:is used for storing commands during the recording. like /00 is the command for
ENTER Key.
BDC_CURSOR:contains the cursor position. it contians the field in which cursor will be.
Example code:
perform bdc_field using BDC_CURSOR
PROJ-PSPID.
perform bdc_field using BDC_OKCODE
=BU.
Question 8:What are the 3 methods that we use in sequence in a Batch input session method ?
1) BDC_OPEN_GROUPfor opening the Batch Input Session
2) BDC_INSERTfor inserting the transactional data into SAP
3) BDC_CLOSE_GROUPfor closing the Batch Input Session
If there are n records , the BDC_INSERT method should be called n times.
BDC_OPEN_GROUP and BDC_CLOSE_GROUP are called only once.
General Information about a session is stored in tableAPQI.
Transaction data for a session is stored in tableAPQD.
Question 9:What is your approach for writing a BDC program?
Identify the Tcode and do the recording in SHDB to populate the BDCDATA.
8/13/2019 Good Interview QandA
26/27
Once the recording is done , one can Transfer it to the Batch input program.
In the batch Input program , The transactional data is read from the file to an internal table.
Then one can loop over the transactional data in the internal table and start uploading the data in SAP
either by CALL TRANSACTION method or by creating sessions through the batch input program.
Question 10:How do you process errors in Session method ?
You can go to Transaction SM35 , Choose the session name and click on Process.
Question 11:What are the different modes of processing batch input sessions?
The three modes are:
Foreground
Display Errors Only
Background
8/13/2019 Good Interview QandA
27/27
Question 12:What is the difference between Synchronous and Asynchronous Update ?
In Synchronous update, the database is updated before the next transaction is taken for processing in
a batch input.
In Asynchronous update, the system doesnt wait for updating the databasebefore the next transaction
is taken for processing in a batch input.
Question 13:What is the transaction for Recording BDC ?
The Tcode is SHDB.
Question 14:How do you read files from the Application server ?
You can use the commands:
OPEN DATASET> opens the file(dataset) either in read /write mode.
READ DATASET> Read the file
CLOSE DATASET> Close the dataset once the date has been read .
Question 15:How do you read files from the presentation server ?
You can use the Function Modules :
GUI_UPLOAD> To read data from file into an internal table
GUI_DOWNLOAD> To write data from internal table to a file on presentation server