® Verwittere Fassade High structural stability Through contact pressure (screw clamp effect) the frictional bond between face surface and adhesive as well as between adhesive and insulation boards is steadily increased. Good reasons for anchoring an ETICS Highest security against wind loads Particularly high wind loads exist q at higher buildings q at building edges q at free-standing buildings q in exposed areas q in coastal areas q in stormy weather Safe installation on old facades Highest security against hygrothermal impacts warm outside cold outside Additional fixing of the insulation boards with ETICS anchors by EJOT Failure of old render: q soot, dirt and old paint reduce the bearing strenght of the adhesive q later chemical reaction of the old render with the adhesive (saponifying) q building physics Cleaning a facade is complex and costly — anchoring pays! Weathered facade
Transcript
®
Verwittere Fassade
High structural stability
Through contact pressure (screw clamp effect) thefrictional bond between face surface and adhesive as well as between adhesive and insulation boards is steadily increased.
Good reasons for anchoring an ETICS
Highest security against wind loads
Particularly high wind loads exist
q at higher buildings
q at building edges
q at free-standing buildings
q in exposed areas
q in coastal areas
q in stormy weather
Safe installation on old facades
Highest security against hygrothermal impacts
warm outside cold outside Additional fixing of the insulation boards with ETICS anchors by EJOT
Failure of old render:
q soot, dirt and old paint reduce the bearing strenght of the adhesive
q later chemical reaction of the old render with the adhesive (saponifying)
q building physics
Cleaning a facade is complex and costly — anchoring pays!Weathered facade
®
Good reasons for EJOT® qualityYour system - our know-how: Over 30 years of ETICS anchors by EJOT®
Through our close contact to practitioners and developers, we are able to develop ideal fastening solutions for today’s and tomorrow’s facade insulation systems. Make use of our decades of know-how Made in Germany: custom designed solutions you can rely on.
Some examples of our service:q personal consultants - even on the building siteq competent consulting via phone or e-mailq fast and reliable delivery serviceq anchore pull-out tests on siteq trainings in fastening technologyq support with bidding processesq there for you worldwide
Our ejotherm family with European Technical Approval (ETA) simplifies your choice. Powerful anchors provide secure fastening in all substrates and with all kinds of insulation materials.
Your benefits: q clear prodcuct range for all substrates q solutions for all insulation materialsq easy anchore choice q reduced stock volumeq quick and easy installation
Short and good - quick and economic:performance up, costs down
The ejotherm generation make it possible. Specially developed expansion zones enable highest characterstic loads with minimum anchorage depths. The result: quick installation and economic total cost.
Your benefits:
q up to 45 mm shorter anchor lengths*)
q valuable safety reserves in doubtful substratesq economic anchor usageq universal expansion zones for maximum use rangeq universal drill diameter for all substrates (8mm)*) in comparison with earlier EJOT anchors
A B C D E
Normal weight concrete
Solid masonry Hollow or perforated masonry
Lightweight aggregate concrete
Autoclaved aerated concrete
ejotherm STR U
competitive product A
competitive product B
competitive product C
nominal anchorage depth hnom characteristic load
costinstallation time, anchore length,
drill abrasion
performancesafety, number of anchors/m², sensitivity with varying substrate qualities
ejotherm STR U
ejotherm NT U
competitive product A
competitive product B
Substrate: Vertically perforated clay bricks (Hlz)Source: specifications of the individual European Technical Approval (ETA)
