GSM Relay Controller

GSM Power Supply

Voltage must be between 10 – 14vdc

GSM Setup

Jumper in Position

GSM Saving Numbers

Using your Mobile Phone Call the GSM Device

Number will be provided with Sim.

GSM Saving Numbers

GSM Module will Hang Call up.

The GSM in Setup Mode will hold your Number in Memory waiting for location storage !

GSM Text Number Save

To Save Number Text to GSM S1 to S5

GSM has 5 number storage database.

The same above to Erase except E1 – E5

GSM Setup Mode - Done

Remove the Jumper.

The GSM is now ready for use.

Example Application

Call or Text the GSM and Open Security Gates !

Other Functions - CSQ

Text “Csq”

CSQ – Indicates Signal Strength in your area

Anything above a value of 10 should be ok !

The second number after the “,” is ignored !

Please note you must have credit on your SIM for this to work !!

Other Functions – Respond Text

Text “Ron”

Ron – Will set your GSM to respond text example :-

“Relay 1 Pulsed On”

Please note you must have credit on your SIM for this to work !!

GSM Text Functions

Text “R1on”

R1on – Will pulse the relay 1 on for 1 second.

Please note you must have credit on your SIM for this to work !!

GSM Text Pulse / Solid

Text “So”

GSM Relays will now be on Solid with a text of “R1on”

To turn off the relay you must text “R1off”

Please note you must have credit on your SIM for this to work !!

GSM Inputs x 4

Some Alarm and Fire Alarm panels have volt free relays which could be wired into the GSM Input and you receive a text “if credit is on sim” to let you know this has been activated !!!

GSM Specifications

1. GSM must have a power supply between 10 and 14vdc !

2. GSM only uses 2G Pay as you go Sim !

3. GSM Relays are 6 amp MAX rated Contacts

4. GSM Inputs can only take voltages from 5v to 14vdc or ac

5. GSM Enclosure IP rating IP54, Glands are IP68

6. Mounting Holes are provided with the Enclosure

Please note:- We do not take any responsibility for damage connecting to 3rd party equipment, Not conforming to the above Specifications will result in damage to the GSM Module !!