Learning Disabilities OCCUPATIONAL THERAPY NEW CRAIGS, INVERNESS IV3 8NP TELEPHONE: (01463) 253616 Or 1. Connect the power cable at the back of the Wii console. 2. Use this cable to connect the Wii to the TV or the projector 3. The grey and black end goes into the back of the wii console 4. If there is red yellow and white sockets on your TV then put the relevant colour cable into the TV. Use the colour coded skart plug and place into the skart socket on your TV Now set up the sensor bar
Transcript
Learning DisabilitiesOCCUPATIONAL THERAPY
NEW CRAIGS, INVERNESS IV3 8NPTELEPHONE: (01463) 253616
Or
1. Connect the power cable at the back of the Wii console.
2. Use this cable to connect the Wii to the TV or the projector
3. The grey and black end goes into the back of the wii console
4. If there is red yellow and white sockets on your TV then put the relevant colour cable into the TV.
Use the colour coded skart plug and place into the skart socket on your TV
Now set up the sensor bar
Learning DisabilitiesOCCUPATIONAL THERAPY
NEW CRAIGS, INVERNESS IV3 8NPTELEPHONE: (01463) 253616
If If you haveset up correctlyyou should see this on
your TV screen
Set your television to the AV channel
Press the power button on the Wii console
You have to press the A button on the wii controller to carry on
You will then be presented with the main menu screen
Take the controller in your hand. Stand back about 3-4 feet from your TV and point it at the TV screen
Conect the colour coded cable into the back of the wii console
Unravel the cable and place just below the TV with the black face facing out
You will now have to find the small hand that floats around the screen. (This may take a few moments to master)
Using the contoller guide the hand to the wii options icon at the bottom left of the screen
You will then be given a choice two options choose Wii settings on the right.
Learning DisabilitiesOCCUPATIONAL THERAPY
NEW CRAIGS, INVERNESS IV3 8NPTELEPHONE: (01463) 253616
You are now ready to play
Then sensor bar at your next option
Then sensor bar position at the next option
When the next screen appears you have select the arrow at the rhs of the screen.
As the sensor bar was positioned below the TV choose the below TV option
You can also position the sensor above the TV if you prefer
Now select the back option until you return to the main menu screen
Insert your selected disc in to the wii console
Whenever you insert a game disc you have to select the top left icon from the main menu
When the game loads select the start option then follow the on screen instutions to play your game
