Guild Equipment Catalogue - Jockey Hollow Weavers...22″ Leclerc Penelope rigid heddle/tapestry...

JHW Equipment Catalog 2020-Feb-10

Guild Equipment Catalogue

The guild owns looms and other equipment that are available for members to borrow. Starting

with the 2019-2020 guild year, equipment is housed in Grace Lutheran Church’s basement so

that it will be easy to borrow and return equipment at meetings. There’s a side door at ground

level (which you may observe on your right just after you’ve turned off of Main Street) so that

larger items can be borrowed and returned from storage without having to take them up or down

stairs.

Floor Looms

● 20″ 4-shaft, 6-treadle Macomber folding loom ● 24″ 4-shaft, 4-treadle Dorset folding loom ● Floor inkle loom

Table Looms

● 22″ Leclerc Penelope rigid heddle/tapestry loom ● 15.75″ Leclerc Dorothy, 4-shaft ● 12″ Mountain Loom, 8-shaft ● 15.75″ Leclerc Voyageur, 8-shaft

Shuttles, Bobbins, and Bobbin Winders

● Schacht boat shuttle ● 2 older Leclerc boat shuttles with metal eyes ● Leclerc boat shuttle, regular (1 ¼″) height ● 2 low-profile (1″ high) LeClerc boat shuttles ● 8″ inkle/belt shuttle with beating edge ● 9″ stick shuttle ● 12″ stick shuttle ● 14″ stick shuttle ● 13 regular (4″) Leclerc bobbins ● Leclerc single-end electric bobbin winder ● Harrisville bobbin winder, with C-clamp

Other Loom Accessories

● 23 treadle hooks for Macomber C loom ● 15.75″ 10-dent stainless-steel Leclerc reed ● 15.75″ 8-dent stainless-steel Leclerc reed ● Gallagher swift (90″ maximum skein) ● Large Glimakra swift (100″ maximum skein) ● Harrisville Designs 12-yard warping board. ● Warping board, 29″ x 36″ ● Ashford warping board 18.5″ x 19″ ● 24″ Leclerc raddle ● Raddle ● 22″ Harrisville raddle (2/24/2019: in need of repair) ● 26″ and 48″ oak lease sticks ● bundle of 9″ flat-steel heddles.


Spinning Wheels

● Haldane Hebridean wheel (horizontal/Saxony) ● Sleeping Beauty Thumbelina (upright/castle)

Other

● two 6″ ratcheting clamps ● 4 wood stanchions. These were once used to control lines at the annual show and sale, but

proved more of a hassle than a help. (These are still in Robin’s basement.)

Macomber CP portable loom, 4 shafts, 6

treadles, 20" weaving width. 12-dent reed.

Folds for transport.

Folded dimensions are 37.5" high × 26" wide ×

11″ deep. It weighs about 38 pounds.

Remember to get the treadle hooks from the

small-equipment box when you borrow this

loom.

Dorset Looms 4 shaft, 4 treadle floor loom. 10

dent reed. 24″ weaving width.

Folds for transport; folded dimensions are 43″

tall, 33″ wide and 11″ deep.


Mountain Looms 8 shaft, 12" weaving width.

8-dent reed.

26" long × 20" high × 19" wide.

Top levers, pivoting beater

Leclerc Dorothy, 4 shafts, 15.75″ weaving

width.

12-dent reed. (If you borrow a different reed,

please note this on your borrowing form.)

Folds for easier carrying; folded dimensions are

20.25″ wide, 9.5″ tall, 28.5″ long

Toolkit contains raddle, 3 stick shuttles, apron

rods, heddle hook, reed hook, lease sticks.


Leclerc Voyageur, 8 shafts, Texsolv heddles,

metal lease sticks, 12-dent reed. (If you borrow

a different reed, please note this on your

borrowing form.)

Folds to fit in its own denim carry bag. Weight

is 21 pounds. Folded dimensions are 19"w, 9"d,

20"h. Squarehead screwdriver and handles are

in front pocket of bag.

Serial #2120 117D

Dents on back edge of right and left sides of

castle from careless folding--please be careful

and don’t make it worse; read the instructions

that accompany the loom.

Oak floor inkle loom.

31.5″ long, 39.25″ high, 13.5″ across the base

crosspieces. Pegs are 6.5″ long, 1″ diameter


Penelope upright rigid-heddle or tapestry loom,

22″ weaving width. 30″ wide (including

handles) 29″ tall, 9.5″ deep with

heddle/shedding device in place; removing pins

allow this to pivot so that the folded depth is

about 2″. 6-dent rigid heddle. Two 22.25″

apron rods.

Serial number 375-A-76-02

Shuttles, Macomber treadle hooks, heddle

hook, heddles, bobbins


Warping board

36" × 29" × 6.25"

12 pegs.

Held together in the corners by bolts with wing

nuts, so it can be disassembled if necessary

Small Ashford Warping frame, 18.5" square

with 5" pegs. Maximum 4.5-yard warp.

16 pegs.

Harrisville Designs warping board (39" x 28").

Can be disassembled. Heavy-duty 3/4" pegs.

Eye bolts for hanging. Maximum 12-yard warp.

Harrisville manual bobbin winder. Make sure

to borrow a clamp with the winder.


Leclerc electric bobbin winder

single end

foot pedal

variable speed

Gallagher swift

90″ maximum skein size

Glimakra swift

100″ maximum skein size.

Sleeping Beauty “Thumbelina.” Double drive.

New Zealand tawa wood with particle-board

drive wheel. Two bobbins.


Haldane “Hebridean.” One bobbin. Double

drive. 32″ h x 29″ w x 16.5″ d; 16.5″ drive

wheel. 18 pounds. Ratios: 8.2: 1 and 9.2:1. One

bobbin

Stanchions


Equipment Borrowing Agreement

You must read this agreement and fill it out completely on both pages. The Treasurer will keep a copy of

this form securely in her cashbox until you return the Guild equipment.

RULES

The Guild has formulated these rules to protect resources and provide equitable access for members.

● All Guild equipment is available to all members in good standing.

● Please be conscientious. Keep Guild equipment away from children, pets, dye, paint, water, etc.

● If you are using Guild equipment for demonstrations or for teaching others, closely supervise its

use.

● Guild equipment must be kept by the borrower; “subletting” is not allowed.

● Please go over the equipment with the Equipment Chair when you pick it up. Take photos if

there are any possible issues or concerns, as equipment will be checked for damage and

maintenance needs upon its return.

● Equipment loans are secured by a credit card. The card will not be charged unless equipment is

lost or damaged beyond normal wear and tear.

CIRCULATION POLICY

● Guild equipment circulates on a first-come, first-served basis to any member in good standing. It

may be borrowed for a period of 1 month. Please keep track of your due date!

● If no one else has reserved the equipment, the equipment loan may be renewed monthly for up

to two additional months.

● After two renewals, a new equipment-borrowing form must be filled out. The Treasurer will

return your old form and file the new one.

● Any planned Guild functions and learning opportunities that require equipment loans take

priority over individual member use. It is the responsibility of the borrowing member to deliver

equipment to the event organizer in adequate pre-event time.

DAMAGE / LOSS PENALTIES

● If Guild equipment checked out to you is lost or stolen, the full replacement cost will be charged

to the credit card you have on file. Any equipment that is not returned or renewed by 30 days

after its due date will be considered lost.

● If equipment in your keeping is damaged beyond normal wear and tear, you will be charged for

the repair and any replacement parts.

AGREEMENT

● I have read and agree to abide by the rules above. I agree to pay any charges for lost or

damaged equipment that Jockey Hollow Weavers may need to assess.

Signature: ___________________________________________________ Date: __________________

(over)


Please print:

Name: _______________________________________________________________________________

Home Phone: _____________________________ Cell phone: __________________________________

Email: _______________________________________________________________________________

Credit Card Number:____________________________________________________________________

Expiration (MM/YY): _____ / _____ CVV: ______

Billing Address: ________________________________________________________________________

Equipment Description:

Damage/Issues when borrowed (if any):

Date Due Date (=one month from date borrowed/renewed)

Borrower’s Initials

Eqmnt Chair/ Treasurer Initials

Borrowed

Renewal #1

Renewal #2

Returned

Damage/Issues when returned:


Jockey Hollow Loaner Equipment List - Replacement Costs

Jockey Hollow Weavers is not a vendor of used fiber equipment, and we earnestly hope that no

member ever needs to replace equipment that was lost or damaged beyond repair while it was in

his or her care.

The replacement costs of equipment as of February 2020 are as follows:

Item Replacement

Cost

Notes

4S 6T Macomber CP Loom $961

4S Dorset Loom $1238 No longer made. Schacht Wolf Pup is comparable

Inkle Loom $144 Spriggs Floor Inkle is comparable

Leclerc Penelope Loom $305

4S Leclerc Dorothy Loom $750

8S Mountain Loom $742 No longer made. 15″ Schacht table loom is

comparable

8S Leclerc Voyageur Loom $885

15.75″ Leclerc Reeds $50 ea

Boat shuttles $40 ea

Leclerc 4″ Bobbins $1.25 ea

Swifts $92 Gallagher is no longer made. A *large* Glimakra

Swift is comparable

Harrisville Warping Board $138

Warping Board $73 9-yard Beka is comparable

Ashford Warping Frame, small $129

Leclerc Electric Bobbin Winder $210

Harrisville Bobbin Winder $99


Item Replacement

Cost

Notes

Haldane spinning wheel $589 No longer made. Kromski Prelude is comparable.

Thumbelina spinning wheel $635 No longer made. Ashford Kiwi is comparable.

Please, PLEASE take good care of guild equipment. Renew items promptly if you need to do so,

and return them by their due date.

Date post:	26-Jan-2021
Category:	Documents
Upload:	others
View:	5 times
Download:	0 times

Guild Equipment Catalogue - Jockey Hollow Weavers...22″ Leclerc Penelope rigid heddle/tapestry...

Documents