+ All Categories
Home > Documents > GW4 Type Three Pole Outdoor Disconnector with Fuse-bases ...

GW4 Type Three Pole Outdoor Disconnector with Fuse-bases ...

Date post: 18-Dec-2021
Category:
Upload: others
View: 3 times
Download: 0 times
Share this document with a friend
2
GW4 Type Outdoor High-Voltage Isolating Switch Series Main application GW4 type outdoor high-voltage isolating switch is used for three-phase AC 50Hz outdoor high voltage electrical equipment, used for the line to switching under pressed voltage no load condition, and electrical isolation the maintenanced high voltage bus, circuit breakers and other electrical equipment and charged high voltage line, can also be used for the opening and closing small capacitance or inductance current. When the knife in the normal break position, can provide a insulation distance consistent with safety requirements. Widely used in 35~110kV substation. Disconnector Models and implications of product G W 4 - □□□ / Rated current W: Anti pollution type (commom type not standard) D: Single grounding (DD: double ground, no mark if do not require grounding) Rated voltage Design code Outdoor type Rated voltage Item Parameters GW4- 40.5 40.5 72.5 126 126 145 Main technical parameters GW4- 72.5 GW4- 126 GW4- 126G GW4- 145 630 1250 2000 2500 630 1250 2000 2500 4000 630 1250 2000 2500 630 1250 1250 2000 2500 Rated current 20 31.5 40(46) 20 31.5 40(46) 20 31.5 40(46) 20 31.5 20 31.5 40(46) Rated short-time withstand current (RMS) 50 80 100(104) 50 80 100(104) 50 80 100(104) 50 80 50 80 100(104) Rated peak withstand current (peak) Rated short-time withstand voltage (effective value) To the ground To the ground Fracture Fracture 80 185 140 325 185(230) 450(550) 185 450 375 650 110 215 160 375 210(265) 520(630) 210 550 315 750 Rated lightning impulse withstand voltage (peak) Wiring terminal rated the horizontal tension Weight of single pole 490(735) 735 735 735 960 80 200 240 300 300 GW4 070
Transcript

Three Pole Outdoor Disconnector with Fuse-bases(Export)

GW1-24

GW-B 11kV-33kV

Type

GW-B

GW-B

Ratedvoltage(kV)

11

33

Ratedcurrent(A)

400

600

4S heatsteady current

(A)

12500

12500

Shockvoltage(A)

31500

31500

Impulse withstandvoltage(kV)

95

195

Power-frequencywithstand

voltage(kV)

42

80

High-voltage Disconnector Switch

Overall and Installation Dimension

GW4 TypeOutdoor High-Voltage Isolating Switch Series

Main application

GW4 type outdoor high-voltage isolating switch is used for three-phase AC 50Hz

outdoor high voltage electrical equipment, used for the line to switching under

pressed voltage no load condition, and electrical isolation the maintenanced high

voltage bus, circuit breakers and other electrical equipment and charged high

voltage line, can also be used for the opening and closing small capacitance or

inductance current. When the knife in the normal break position, can provide a

insulation distance consistent with safety requirements. Widely used in 35~110kV

substation.

Disconnector

Models and implications of product

G W 4 - □ □ □ / □

Rated current

W: Anti pollution type (commom type not standard)

D: Single grounding(DD: double ground, no mark if do not require grounding)

Rated voltage

Design code

Outdoor type

Rated voltage

Item

Parameters

GW4-40.5

40.5 72.5 126 126 145

Main technical parameters

GW4-72.5

GW4-126

GW4-126G

GW4-145

630125020002500

6301250200025004000

630125020002500

6301250

125020002500

Rated current

2031.5

40(46)

2031.5

40(46)

2031.5

40(46)

2031.5

2031.5

40(46)

Rated short-timewithstand current (RMS)

5080

100(104)

5080

100(104)

5080

100(104)

5080

5080

100(104)

Rated peak withstandcurrent (peak)

Rated short-timewithstand voltage(effective value)

To the ground

To the ground

Fracture

Fracture

80

185

140

325

185(230)

450(550)

185

450

375

650

110

215

160

375

210(265)

520(630)

210

550

315

750

Rated lightningimpulse withstandvoltage (peak)

Wiring terminal rated thehorizontal tension

Weight of single pole

490(735) 735 735 735 960

80 200 240 300 300

GW4

069 070

1430

450±5

4

5

3

A-A

650

2

1

900

4750

4420

454.5

GW4 TypeOutdoor High-Voltage Isolating Switch Series

The use of environmental conditions

Ambient temperature: upper limit +40℃, lower limit -30℃

Altitude: no more than 3000m;

Wind speed: no more than 35m/s;

Earthquake intensity: do not exceed 8 degree;

Pollution level: no more than III class

No severe vibration, no corrosive gas, no fire, no explosion danger place.

1.

2.

3.

4.

5.

6.

Outline and mounting dimensions

1200(40.5kV)

1600(72.5kV)

2000(126kV)

1200(40.5kV)

1600(72.5kV)

2000(126kV)

The main knife opening position

860(4

0.5

kV

)

1120(7

2.5

kV

)

1650(1

26kV

)

120(40.5/72.5kV)

135(126kV)

620(40.5/72.5kV)

135(126kV)

B B

φ30012

11

φ300

620(40.5/72.5kV)

635(126kV)1400(40.5)

2200(72.5kV)

3000(126kV)

620(40.5/72.5kV)

635(126kV)

D

A direction basic installation size

1

2

3

4

5

6

7

8

A

9

550(40.5)

650(72.5kV)

1300(126kV)

40.5/72.5kV disconnector

126kV disconnector

60

4×φ14 320

8×φ18 240

1300

100

240

1. Wiring terminal

2. Contact

3. Contact finger

4. Support insulator

5. Switch base

6. The main knife operating crank arm

7. The main knife vertical rod (galvanized steel pipe of φ45×45)

8. Anchor ear

9. The main knife operating mechanism (CJ6 or CS17)

10. Grounding contact finger

11. The earth knife vertical rod (galvanized steel pipe of φ45×5)

12. The earth knife operating mechanism (CJ78CS17)

GW5 TypeOutdoor High-Voltage Disconnector Series

Main application

GW5 type outdoor high-voltage isolating switch is used for three-phase AC 50Hz

outdoor high voltage electrical equipment, used for the line to switching under

voltage pressed no load condition, and electrical isolation the maintenanced high

voltage bus, circuit breakers and other electrical equipment and charged high

voltage line, can also be used for the opening and closing small capacitance or

inductance current. When the knife in the normal break position, can provide a

insulation distance consistent with safety requirements. Widely used in 35~110kV

substation.

Models and implications of product

G W 5 - □ □ □ / □

Rated current

W: Anti pollution type (commom type not standard)

D: Single grounding(DD: double ground, no mark if do not require grounding)

Rated voltage

Design code

Outdoor type

Disconnector

Rated peakwithstand current

Rated short-timewithstand current

Rated shortcircuit duration

100kA

40kA

2s

Voltage, current parameters

Item

Parameters

Unit

40.5 72.5 126 145

Main technical parameters

GW5-40.5

GW5-72.5

GW5-126

GW5-145

Rated voltage

Rated current

kV

630/1250/1600/2000A

Rated frequency 50Hz

Disconnector

Rated peakwithstand current

Rated short-timewithstand current

Rated shortcircuit duration

50/80/100kA

20/31.5/40kA

4s

I typeearth knife

Rated peakwithstand current

Rated short-timewithstand current

Rated shortcircuit duration

25kA

10kA

4s

II typeearth knife

GW5

071 072

GW4


Recommended