| Date post: | 02-Jun-2018 |
| Category: |
Documents |
| Upload: | german-gonzalez |
| View: | 213 times |
| Download: | 0 times |
of 12
8/11/2019 HA030092 Issue 2
1/12
imagine making the impossible possible
DrivesCatalogueAC Drives
Soft Starters
DC Drives
Software
8/11/2019 HA030092 Issue 2
2/12
Our sophisticated products are supplied to satisfiedcustomers all over the world and are used in all kinds of applications from simple to extremely complex systems.So, you dont have to imagine a drive so clever, its simple
with our wide choice of AC drives, softstarters and DC drives. Add to this, astrong sales team comprised entirelyof degree qualified engineers, anabsolute commitment to innovationand 5% of our total sales continuouslyre-invested in research anddevelopment: We can and doimagine making the impossible possible for our customers.
www.eurotherm.com/drives
A wide choice of AC Drives,Soft Starters and DC Drives
AC DrivesA wide range of variable speed drives for AC inductionmotors with Output Power Ratings from 0.18kW/0.25HPup to 2100kW/2800HP.
Soft StartersA complete range of micro-processor based SoftStarters with Output Power Ratings from 1.1kW/1.5HPup to 1850kW/2500HP with standard internal By-PassRelay.
8/11/2019 HA030092 Issue 2
3/12
www.eurotherm.com/drives
imagine a drive soclever, its simple
DC DrivesAnalogue and Digital, 1- and 4-quadrant, variablespeed drives with internal field controller and universalspeed feedback inputs. Armature current ranges from3.4Amp to 2250Amp
SoftwareAlmost every AC Drive, DC Drive and Soft Starter canbe commissioned and configured by softwaresupplied free of charge and downloadable.
From simple applications tocomplex systems
Easy installation and operation Dynamic performance
Flexible programming High accuracy
8/11/2019 HA030092 Issue 2
4/12
8/11/2019 HA030092 Issue 2
5/12
www.eurotherm.com/drives
Soft StartersA complete range of micro-processor based Soft Starters withOutput Power Ratings from 0.55kW/0.75HP up to1850kW/2800HP.
Available with internal By-Pass Relay standard for all models,Fieldbus communication, intelligent pump control, optimised
motor starting torque, electronic motor protection, etc. ERSSWseries soft starters are static starters designed for theacceleration, deceleration and protection of three phaseinduction motors. This series is based on microprocessors withstate-of-the-art design for the best starting performance and alow cost complete solution.
The control of voltage applied to the motor, by means of thyristor firing angle variation, enables smooth starting andstopping. With proper adjustments it is possible to optimisethe motor starting torque so that the starting current remainsas low as possible.
3-wire (Star or Delta) and 6-wire (inside Delta) connections tothe motor are possible.
Remote HMI with parameter copy function for mounting in
cabinet door or at the front of the soft starter are available.
Soft Starters ERSSW05 Series
Soft Starters ERSSW06 Series
Soft Starters ERSSW07 Series
Electronic motor protection Limits current inrush Limits line voltage drop Pump Control feature avoids pipeline water hammer Simplified electrical wiring Integral and remote operator interface enables easy parameter
adjustment - easy start-up and operation Multi-motor starting Kick-start function for heavy duty and functional loads with high
starting torque Configurable by using ER Superdrive G2 Software
The ERSSW05 Plus MicroSoft-Starters, with DigitalSignal Processor (DSP)control have been designedto supply an excellentperformance during startingand stopping of electricmotors with excellentcost/benefit ratio. Internal By-Pass Relay standard. PowerRatings up to 45kW/60HP.
The ERSSW06 Soft Startersoffer the highestperformance during startingand stopping of electricmotors. Different starting/
stopping modes can beconfigured includingStarting with Torquelimitation Power Ratings upto 1850kW/2500HP
The ERSSW07 Soft Starterseries is compact and offersadvanced functionalitycombined with modulardesign that makes itpossible to add options asrequired. Power Ratings upto 150kW/200HP
3.7kW-1950kW/5HP-2600HP Electronic integral motor protection Built-in electronic overload relay Built-in operator interface (keypad) Inrush current limitation Line voltage drop limitation Mechanical shock elimination Increased motor and mechanical parts life Electrical wiring simplification Serial communication Configurable by using ER Superdrive Software
All motor protections built-in Digital DSP Easy operation through operator interface High efficiency Simple electrical wiring
Intelligent pump control feature Optional Soft PLC to be able to Start multiple motors one after theother by using only 1 soft starter
Fieldbus communication (Profibus DP, DeviceNet) Available for both 3 wire and 6 wire configurations Configurable by using ER Superdrive G2 Software
8/11/2019 HA030092 Issue 2
6/12
DC Drives
The ER-340, ER-680 and ER-1220series are series of speedcontrollers for shunt wound orpermanent magnet motors,utilising speed feedback fromthe armature voltage, or from ashaft mounted tachogenerator.Armature Currents up to12.2 Amp.
The units employ closed loopcontrol with both ArmatureVoltage feedback voltage andDC Tacho feedback to achieveprecise control of the motortorque and speed. ArmatureCurrents up to 48 Amp.
Variable Speed DC Drives ER-3200i/3600XRi Series 1-quadrant power ratings 2.2kW-11kW @320V dc 4-quadrant power ratings 1.1kW-9.5kW @320V dc CE, CSA, UL and cUL approved
Variable Speed DC Drives ER-PL/PLX Series 40 character alpha-numeric, back-lit display Integral display Full suite of centre winding blocks Diameter control and field weakener for extended speed range
applications Motorised potentiometer with memory 2 x PID loops and 2 x totalisers, freely programmable Delay timer Current profiling Batch counter Autotune for current loop
Variable Speed DC Drives ER-340/680/1200 Series Range of 1 and 4 quadrant DC Drives Power rating 0.55kW-1.9kW @ 180V dc Compact design Can be used in speed or current control modes Compact design
CE, UL, and cUL approved
The digital DC drives ER-PL andER-PLX are probably the mostpowerful on the market today.With an extensive range of standard software blocks, they cantake control of the mostdemanding motion tasks. Availablein both 2- and 4-quadrant versions,the range comprises of 5 verycompact chassis sizes. ArmatureCurrents up to 2250 Amp.
www.eurotherm.com/drive s
The DC Drive product range can be used to control DC shunt and DC permanent magnet motors and offers a wider choice of variablespeed DC drives than any other manufacturer.
The range has over 50 models with Armature current ratings up to 2250 Amps.
For higher armature currents (up to 3000 Amps) we can offer a Digital, DC stack driver unit with external thyristor stack.
Both the Analog and Digital, 1- and 4-quadrant, DC-Drives have an internal field controller and universal speed feedback inputs(pulse encoder, tacho and armature voltage).
Analog DC Drives: The Din-rail mounted analog Series (ER-340/680/1220) is available for armaturecurrents from 3.4A up to 12.2A in both 1- and 4-quadrant, non-isolated and isolated versions.
The panel mounted analog Series (ER-3200i and ER3600XRi) is available for armature currentsfrom 4A up to 48A in both 1- and 4-quadrant isolated versions.
Digital DC Drives: This range is probably the most powerful drive on the market today including2-quadrant (most ER-PL models) and 4-quadrant versions (all ERPLX models), internal fieldcontroller and fully programmable function blocks and soft wiring. (ER-PL/ER-PLX).
A number of predefined application function blocks are availableas standard for winders, section control, diameter calculation, etc. Armature Current outputsare available up to 2250 Amps. The optional Fieldbus communication can be used forcomplete system integration.
8/11/2019 HA030092 Issue 2
7/12
Software
www.eurotherm.com/drive s
ER SDW Soft Starter SizingSoftwareSoftware designed to help withthe sizing and specification of theEurotherm Soft Starters.
ER Superdrive SoftwareSoftware for Windowsenvironment, enablingparameter setting, commandand monitoring of drives (ACDrives and Soft Starters).
The graphical Signal FlowDiagram (SFD) programmingoption adds powerful systemdesign and documentationfeatures with function blocks,user wiring, monitoring andtrending. To be used with ER-PL/ER-PLX, Digital, DC Drives.
Software which makesinterconnecting the drivesapplication blocks a simple taskand enables the user to tailor thedrives control strategy to exactlymeet the demands of the processor application. To be used withER-PL/ER-PLX, Digital, DC Drives.
Configuration and Diagnostic ER-PL_PILOT No programming knowledge required Off line creation of recipes, parameter settings and function
block connections Monitoring, Diagnostics and commissioning tool Supplied free of charge Easy to use
Graphical Function Block Programming SAVVY Full ERPL(X), DCDrive configuration, operation, monitoring and
diagnostic functionality Internet access to Drives and Systems for remote configuration,
monitoring and diagnostics Drive configuration cloning Fully documented application with the ability to annotate
drawings Communication through standard ER PL(X) serial port or
Ethernet (optional) Automated software updates
Software ER SDW and ER SuperdriveER SDW Software Presentation of Voltage, Current, Torque charts Specifies optimum Parameter settings based on input characteristics
ER Software Save and Restore function of all Parameter settings Trace function (Superdrive G2 Software) simulates a 4 channel
oscilloscope for commissioning purposes Automatic identification of connected instrument Off Line editing of parameter settings
ER SDW Soft Starter Sizing Software: Selection of various Soft Starter applications with their specific characteristics. Soft Starters will be sized based on specified start conditions and motor
specifications, required options, etc. Used to select the correct Soft Starter product based on motor specification,
application, operating conditions (overload, number of starts per hour, etc.)
ER Superdrive Software for AC Drives and Soft Starters: Parameter transfer from PC to the drive Parameter transfer from drive to the PC enabling backup of configuration Used for Monitoring, Parameterization, Operation and Commissioning of all
Eurotherm Inverters and Soft Starters
SAVVY Software for ER-PL/ER-PLX, Digital, DC Drives: Easy, intuitive, platform independent, Java based, software runs under
Windows, Mac OSX, Unix, Linuxs Online or Offline design of DC Drive configuration using intuitive
graphical tools with pre engineered function blocks and soft wiring
ER-PL PILOT Software for ER-PL/ER-PLX, Digital, DC Drives: Cost effective and easy to use Recipe creation and functionality
A range of software designed for the configuration or specificationof the Eurotherm range of AC Drives, Soft Starters and DC Drives.
8/11/2019 HA030092 Issue 2
8/12
Selection guides
www.eurotherm.com/drives
FeaturesPower Rating
Supply VoltageDisplay
Phases
Conguration/Sizing Software
Communication
Soft Starters
ERSSW07ERSSW06ERSSW05
FeaturesPower Rating
Supply Voltage
Display
Phases
Conguration Software
Communication
Control Mode
AC Drives Variable Speed Drive
ERCFW08 ERCFW10ERCFW090.18-15kW, 0.25-20HP
200-240V 1- and 3-Phase380-480V 3-Phase
200-240V 1- and 3-Phase380-480V 3-Phase
690V 3-Phase
Integral, Remote Integral, Remote
1-Phase or 3-Phase 1-Phase or 3-Phase
7.5-150kW, 75-200HP
220-575VIntegral, Remote
3-Phase
V/Hz, Sensorless, Vector V/Hz, Sensorless, Vector,Closed loop vector
V/Hz, Sensorless, Vector,Closed loop vector
Modbus RTU, CanOpen,DeviceNet
ER Superdrive
Modbus RTU/Probus DP/DeviceNetModbus RTU/Probus DP/DeviceNet
ER G2 Superdrive,SDW Sizing
ER G2 Superdrive,SDW Sizing
0.55-55kW, 0.74-75HP
220-575VRemote
3-PhaseRS232
0.1-1100kW, 1.5-1500HP
220-690V
Integral, Detachable
1-Phase or 3-Phase
Probus DP, DeviceNet,Ethernet/IP, Modbus RTU
Probus DP, DeviceNet,Ethernet/IP, Modbus RTU
ER Superdrive ER G2 Superdrive
0.18-2.2kW, 1.5-3.0HP
110-240V 1-Phase
Integral
1-Phase
V/Hz
none
none
ERCFW111.1-2100kW, 1.5-2800HP
ER Superdrive,SDW Sizing
55-1850kW, 75-2500HP
220-575VIntegral, Remote
3-Phase
8/11/2019 HA030092 Issue 2
9/12
www.eurotherm.com/drives
ER SuperdriveER Superdrive G2
Software SuperDrive Soft Starter Sizing Conguration andDiagnostic
Graphical FunctionBlock Programming
SDW SAVVY ER-PL PILOT
FeaturesPower Rating
Supply Voltage
Phases
Armature Current
Conguration Software
Communication
DC Drives Variable Speed Drive
ER-340/-680/-1200 ER-PL/ER-PLXER-3200i/3600XRi
0.55-1.8kW(at 180V armature voltage)
110-240V, 30-60V
3.4-12.2A
1-Phase
Probus DP, DeviceNet, CANopen, Modbus RTU
ER-PL Pilot and SAVVY
none
2.2-11kW(at 320V armature voltage)
240-415V, 30-60V
4-48A
1-Phase
15-1000kW (at 460V armature voltage)
100-480V, 100-690V
36-2250A
3-Phase
Control Mode 1- and 4-Quadrant 1- and 4-Quadrant 1- and 4-Quadrant
none
none none
8/11/2019 HA030092 Issue 2
10/12
Compressors Optimisation of system pressurisation control with energy
savings and improvement of compressor efficiency Reduction of motor startup current minimising the wear and
tear of the mechanical system permitting a reduction of maintenance
Possibility of safety and maintenance signaling and alarms of pressurisation system
Provides startup system control of other compressor unitswith an increased efficiency of the pressurisation system
Multi-Pump ControlThe ERCFW-11 permits thesystem to maintain the linepressure of a pipe constant,regardless of flow demandfluctuations.
This allows the system to useonly the necessary numberof pumps to supply its
demand. It controls thespeed of one of the pumps,turning the others on and off according to demand.
Besides controlling the systemoutput pressure, it also monitorsthe suction pressure and the captation tank level.
The ERCFW-11 automatically alternates the pump that is runningaccording to the number of hours each one has been operating, asto ensure uniform use.
This Multi-Pump Control is available free of charge through aSoftPLC function application software available on the Eurothermsite.
Paper and Cellulose / Wood Display with three parameters visualised at the same time.
USB communication in the front of the inverter for datagathering and programming
Elevated degree of compactness, permitting the assembly of several inverters in reduced space. Modular inverters for largepowers, providing an excellent power vs. volume ratio
Flexible hardware programming and configuration, facilitatingapplications using synchronisation
Highly precise speedand torque control
Networkcommunication withmain marketprotocols
Quick and simplifiedprogramming
Highly reliable androbust
ApplicationsEurotherm is also offering Products and Solutions in chosenVertical Markets where we are able to offer a complete solutionto our customers. Technical expertise and detailed applicationknowledge are our trademark. Drives products from Eurothermare commonly used in those Vertical Markets offering aseamless integration.
Life Sciences Fermentors Autoclaves Sterilizers Chillers Stirrers & Agitators BMS (HVAC) System
Heat Treatment Fans and Pumps Rolling Mills Laminators Rotating Furnaces Slitters and Perforators
Glass Coating line Speed Control Conveyors Cooling Fans Rollout Tables Top roller Speed Control
(float bath) Mixers (batch house)
Plastics & Rubber Extruders Chillers Gear Pumps Winders/Unwinders Mixers
Calenders
Water/Waste Water Pumps (Speed Control)
Pumps (Soft Starter Control) Regenerative System
Renewable Energy and Energy Efficiency Reducing peak Power by
Soft Starter control ofFans and Pumps
Energy saving using VFDs
to control Fans and Pumps Regenerative System
The ERCFW11 Frequency Inverter can be used in both simpleand sophisticated applications, due to its broad range of functions and easy configuration, installation and operation.The ERCFW11, through its Vectrue Inverter technology,presents excellent static and dynamic performance, precisetorque and speed control, dynamic response, positioningprecision, and high overload capacity.
The ERCFW11 is also developed for applications where thedecisive factor is safety, through several built-in protections andalarms as well as through the Safety Stop function inaccordance with EN 954-1, category III.
A Soft PLC is standard for advanced calculations, PLC functions,function block programming and pre defined applicationprograms.
On these pages you will see a number of applications wherethe Eurotherm Inverters have been delivered.
www.eurotherm.com/drives
8/11/2019 HA030092 Issue 2
11/12
Pumps and Fans Precise control of process variables (pressure,
flow, temperature, etc.) through a PID controlleradded to the speed control loop
Optimisation of power consumption throughspeed control with an adjustable V/f curve
Possibility of safety and maintenance signalingand alarms of pumps and fans Availability of PID controllers to control other
process variables like valves, dampers, otherfrequency inverters, etc
Cement and Mining
Robust hardware and large overload capacity (modelsdimensioned in HD)
Elevated degree of compactness, permitting theassembly of several inverters in reduced space.Modular inverters for large powers, providing anexcellent power vs. volume ratio
Network communication, with the main protocolsavailable on the market
Steel Industry Highly precise speed and torque control Large overload capacity (models dimensioned in HD) Flexible hardware programming and configuration, facilitating applications
needing synchronisation Network communication with the main market protocols Elevated degree of compactness, permitting the assembly of several
inverters in reduced space. Modular inverters for large powers, providingan excellent power vs. volume ratio
Hoist and cranes
SoftPLC function Three modes of vector control Highly compact. Intelligent control of
ventilation system
Refrigeration SoftPLC function built
into the standard productenabling the use of twocontrollerssimultaneously. Thischaracteristic is for HVACapplications
Display of threeparameters visualised atthe same time
USB communication inthe front of the inverterfor data gathering andprogramming
Sugar and Alcohol
Modular and compact 12-pulse rectifier for reduction of harmonics Regenerative rectifier for centrifuges Highly robust and durable
Process Machines
Built-in PLC and Real Time Clock High connectivity Fieldbus Highly precise speed and torque at all speed ranges User friendly interface and programming
Chemical and Petrochemical Highly reliable and robust. Elevated degree of compactness, permitting the
assembly of several inverters in reduced space.Modular inverters for large powers, providing anexcellent power vs. volume ratio
Plug-and-play system for additional modules, ensuringincreased flexibility in adapting to existing systems
Network communication, with the most used andrenowned market protocols
www.eurotherm.com/drives
8/11/2019 HA030092 Issue 2
12/12
AUSTRALIA Sydney Eurotherm Pty. Ltd.T (+61 2) 9838 0099F (+61 2) 9838 9288E [email protected]
AUSTRIA ViennaEurotherm GmbHT (+43 1) 7987601F (+43 1) 7987605E [email protected]
BELGIUM & LUXEMBOURG
MohaEurotherm S.A/N.V.T (+32) 85 274080F (+32) 85 274081E [email protected]
BRAZIL Campinas-SPEurotherm Ltda.T (+5519) 3707 5333F (+5519) 3707 5345E [email protected]
CHINA
Eurotherm ChinaT (+86 21) 61451188F (+86 21) 61452602E [email protected] OfficeT (+86 10) 84585757F (+86 10) 84584521E [email protected] OfficeT (+86 20) 38106506F (+86 20) 38106511E [email protected]
DENMARK CopenhagenEurotherm Danmark AST (+45 70) 234670F (+45 70) 234660E [email protected]
FINLAND AboEurotherm FinlandT (+358) 22506030F (+358) 22503201E [email protected]
FRANCE LyonEurotherm Automation SAT (+33 478) 664500F (+33 478) 352490E info. [email protected]
GERMANY LimburgEurotherm Deutschland GmbHT (+49 6431) 2980F (+49 6431) 298119E [email protected]
HONG KONG
Eurotherm HongkongT (+85 2) 28733826F (+85 2) 28700148E [email protected]
INDIA ChennaiEurotherm India LimitedT (+91 44) 24961129F (+91 44) 24961831E [email protected]
IRELAND DublinEurotherm Ireland LimitedT (+353 1) 4691800F (+353 1) 4691300E [email protected]
ITALY ComoEurotherm S.r.lT (+39 031) 975111F (+39 031) 977512E [email protected]
KOREA SeoulEurotherm Korea LimitedT (+82 31) 2738507F (+82 31) 2738508E [email protected]
NETHERLANDS Alphen a/d RijnEurotherm B.V.T (+31 172) 411752F (+31 172) 417260E [email protected]
NORWAY OsloEurotherm A/ST (+47 67) 592170F (+47 67) 118301E [email protected]
POLAND KatowiceInvensys Eurotherm Sp z o.o.T (+48 32) 2185100F (+48 32) 2185108E [email protected]
SPAIN MadridEurotherm Espaa SAT (+34 91) 6616001F (+34 91) 6619093E [email protected]
SWEDEN MalmoEurotherm ABT (+46 40) 384500F (+46 40) 384545E [email protected]
SWITZERLAND WollerauEurotherm Produkte (Schweiz) AGT (+41 44) 7871040F (+41 44) 7871044E [email protected]
UNITED KINGDOM WorthingEurotherm LimitedT (+44 1903) 268500F (+44 1903) 265982E [email protected]
U.S.A. Leesburg VAEurotherm Inc.T (+1 703) 443 0000F (+1 703) 669 1300E [email protected]
ED58
Algeria AzerbaijanBahrainBangladeshBeninBosnia andHerzegovinaBulgariaBurkina FasoCameroonCanadaCzech RepublicEgypt GeorgiaGreeceGuinea-Conakry Hungary IndonesiaIsraelIvory Coast Japan JordanKazakhstanKenyaKuwait LatviaLithuaniaMalaysia
MaliMexicoNew ZealandNiger NigeriaOmanPakistanPhilippinesPuerto RicoQatar RomaniaRussiaSaudi ArabiaSerbia andMontenegroSingaporeSlovak RepublicSloveniaSouth AfricaSri LankaThailandTogoTunisiaTurkey TurkmenistanUAE UkraineUzbekistan
Represented by:
Eurotherm is also represented in thefollowing countries:
Copyright Eurotherm Limited 2009Invensys, Eurotherm, the Eurotherm logo, Chessell, EurothermSuite, Mini8, Eycon, Eyris, EPower and Wonderware are trademarks of Invensys plc, itssubsidiaries and affiliates. All other brands may be t rademarks of their respective owners.
All rights are strictly reserved. No part of this document may be reproduced, modified, or transmitted in any form by any means, nor may it be storedin a retrieval system other than for the purpose to act as an aid in operating the equipment to which the document relates, withoutthe prior written permission of Eurotherm limited.
Eurotherm Limited pursues a policy of continuous development and product improvement. The specifications in thisdocument may therefore be changed without notice. The information in this document is given in good faith, but is intendedfor guidance only.
Eurotherm Limited will accept no responsibility for any losses arising from errors in this document.
Eurotherm Part No. HA0300923 Issue 2 Printed in England on recycled paper 10.09
Eurotherm: International sales and service
www.eurotherm.com
