Hamburg Smart Card / SIM Card / Micro SIM Card / Micro SD Card Connector
New Product Design Presentation New Products P/N:*Producing: MCA-T08, ICC-M03, ICC-307, ICC-407,
ICA-512, ICA-561, ICA-562,ICA-621, ICA-627, ICA-628, ICA-630, ICA-637, ICA-667, ICA-689,ICA-708, ICA-709, ICA-710, ICA-712
*Developing: MCA-T05, MCA-T07, ICC-M02, ICC-M06,ICC-M07, ICC-308, ICA-563, ICA-565, ICA-622,ICA-650, ICA-651, ICA-681,ICA-711, ICA-713
Hamburg Industries Co., Ltd. All Rights Reserved 2012
Hamburg Industries Co., Ltd. All Rights Reserved 2012
MCA-T08 ICC-M03 ICC-307 ICC-407
New Products- Producing
ICA-512 ICA-561 ICA-562
Hamburg Industries Co., Ltd. All Rights Reserved 2012
ICA-621 ICA-627 ICA-628 ICA-630
New Products- Producing
ICA-637 ICA-667 ICA-689
Hamburg Industries Co., Ltd. All Rights Reserved 2012
ICA-708 ICA-709 ICA-710 ICA-712
New Products- Producing
Hamburg Industries Co., Ltd. All Rights Reserved 2012
MCA-T08 Micro SD Card Connector
1. 8 Pin,SMT Type,With Ground Pin*4
2. Dim.: 14.20L x 14.20W x 1.70H mm
3. Metal cover,Hinge type
4. Low profile
5. Insert-molding for CP8
Hamburg Industries Co., Ltd. All Rights Reserved 2012
ICC-M03 Micro SIM Card Connector
1. 8 Pin,SMT Type
2. Blade Switch: Normally Close
3. Dim.: 18.80L x 15.85W x 1.70H mm
4. Metal cover,With tray type (tray should be produced by customer)
5. Same side pin footprint,Low profile
6. Insert-molding for CP8
Hamburg Industries Co., Ltd. All Rights Reserved 2012
ICC-307 Smart Card Connector
1. 6 Pin,SMT Type
2. Blade Switch: Normally Open
3. Dim.: 26.00L x 17.00W x 1.10H mm
4. Ultra slim H=1.10 mm
Hamburg Industries Co., Ltd. All Rights Reserved 2012
ICC-407 Smart Card Connector
1. 6 Pin,SMT Type
2. Dim.: 12.10L x 8.70W x 1.00H mm
3. Ultra slim H=1.00 mm
4. Insert-molding for CP8
5. Opposite pin footprint
Hamburg Industries Co., Ltd. All Rights Reserved 2012
ICA-512 SIM Card Connector
1. 6 Pin,SMT Type
2. Dim.: 27.30L x 17.90W x 2.40H mm
3. Metal cover,With tray type
4. Insert-molding for CP8
5. Same side pin footprint
Hamburg Industries Co., Ltd. All Rights Reserved 2012
1. 6, 8 Pin,SMT Type (post optional)
2. Blade Switch: Normally Close
3. Dim.: 26.60L x 18.70W x 2.00H mm
4. Push-Push type
5. Insert-molding for CP8 & SW
6. Same side pin footprint
ICA-561 SIM Card Connector
Hamburg Industries Co., Ltd. All Rights Reserved 2012
1. 8 Pin,SMT Type (with post)
2. Blade Switch: Normally Close
3. Dim.: 26.75L x 19.28W x 2.10H mm
4. Push-Push type,Reverse type
5. Insert-molding for CP8 & SW
6. Same side pin footprint
ICA-562 SIM Card Connector
Hamburg Industries Co., Ltd. All Rights Reserved 2012
ICA-621 Smart Card Connector
1. 8 Pin,SMT Type (with post)
2. Blade Switch: Normally Open
3. Dim.: 55.50L x 40.00W x 5.80H mm
4. Switch new design, contact up and down stably
5. EMV compliant
Hamburg Industries Co., Ltd. All Rights Reserved 2012
ICA-627 Smart Card Connector
1. 8 Pin,SMT Type (with post),Blade Switch: Normally Open
2. Dim.: 61.00L x 32.00W x 3.50H mm
3. Reverse type,Same side pin footprint
4. Low profile
5. EMV & NDS & PCI compliant
6. The card slot gap is based on PCB surface
Hamburg Industries Co., Ltd. All Rights Reserved 2012
ICA-628 Smart Card Connector
1. 8 Pin,With Guide,DIP Type2. Blade Switch: Normally Close3. Dim.: 62.00L x 57.55W x 6.40H mm or 62.00L x 55.00W x 9.55/11.95H mm4. Standoff H= 0.00mm or 3.15/ 5.55mm5. Can match with PCMCIA card connector6. Thru-Hole with board-lock post7. EMV & NDS compliant
Hamburg Industries Co., Ltd. All Rights Reserved 2012
ICA-630 Smart Card Connector
1. 8 Pin,DIP Type
2. Blade Switch: Normally Close
3. Dim.: 62.00L x 40.00W x 5.65H mm
4. Thru-Hole with board-lock post
5. Aluminum cover,With heat-dissipation function
6. EMV & NDS compliant
Hamburg Industries Co., Ltd. All Rights Reserved 2012
ICA-637 Smart Card Connector
1. 8 Pin,SMT Type (with post)
2. Blade Switch: Normally Close
3. Dim.: 57.80L x 35.00W x 4.95H mm
4. Low profile
5. EMV compliant
Hamburg Industries Co., Ltd. All Rights Reserved 2012
ICA-667 Smart Card Connector
1. 8 Pin,Dual slot,DIP Type,Blade Switch: Normally Close
2. Dim.: 62.00L x 46.55W x 11.00H mm
3. Standoff H= 1.00 mm
4. Thru-Hole with board-lock post
5. PCB Thickness= 1.20 mm
6. EMV & NDS compliant
Hamburg Industries Co., Ltd. All Rights Reserved 2012
ICA-689 Smart Card Connector
1. 8 Pin,DIP Type,Blade Switch: Normally Close
2. Dim.: 62.00L x 40.00W x 11.88/ 13.80/ 14.55H mm
3. Standoff H= 3.65/ 4.20/ 5.78/ 7.70/ 8.45 mm
4. Can match with PCMCIA card connector
5. Thru-Hole with board-lock post
6. EMV & NDS compliant
Hamburg Industries Co., Ltd. All Rights Reserved 2012
ICA-708 Smart Card Connector
1. 8 Pin,With Guide,SMT Type (with post)
2. Blade Switch: Normally Open
3. Dim.: 55.50L x 59.80W x 5.30H mm
4. Landing type,High Durability,Low profile
5. Metal holder on the side, increase the strength
6. EMV compliant
Hamburg Industries Co., Ltd. All Rights Reserved 2012
ICA-709 Smart Card Connector
1. 8 Pin,SMT Type (with post),Sealed Switch: Normally Open
2. Dim.: 55.50L x 40.00W x 6.30H mm
3. Landing type,High Durability
4. Same side pin footprint
5. Metal holder on the side, increase the strength
6. EMV & PCI compliant
Hamburg Industries Co., Ltd. All Rights Reserved 2012
ICA-710 Smart Card Connector
1. 8 Pin,SMT Type (with post),Sealed Switch: Normally Open
2. Dim.: 57.80L x 38.00W x 6.90H mm
3. Landing type,High Durability
4. Same side pin footprint
5. All solder pin hidden from the product outline
6. EMV & PCI compliant
Hamburg Industries Co., Ltd. All Rights Reserved 2012
ICA-712 Smart Card Connector
1. 8 Pin,SMT Type (with post)
2. Blade Switch: Normally Open
3. Dim.: 55.50L x 40.00W x 5.80H mm
4. Landing type,High Durability
5. Switch new design, contact up and down stably
6. EMV compliant
Hamburg Industries Co., Ltd. All Rights Reserved 2012
MCA-T05 MCA-T07 ICC-M02 ICC-M06
ICC-M07 ICC-308 ICA-563 ICA-565
New Products- Developing
Hamburg Industries Co., Ltd. All Rights Reserved 2012
ICA-711 ICA-713
New Products- Developing
ICA-622 ICA-650 ICA-651 ICA-681
Hamburg Industries Co., Ltd. All Rights Reserved 2012
MCA-T05 Micro SD Card Connector
1. 8 Pin,SMT Type
2. Blade Switch: Normally Open
3. Dim.: 16.10L x 15.20W x 1.95H mm
4. Push-Push type
5. Reverse type
Hamburg Industries Co., Ltd. All Rights Reserved 2012
MCA-T07 Micro SD Card Connector
1. 8 Pin,SMT Type
2. Blade Switch: Normally Open
3. Dim.: 14.90L x 14.24W x 1.45H mm
4. Ultra slim
5. Push-Push type
6. Insert-molding for CP8
Hamburg Industries Co., Ltd. All Rights Reserved 2012
ICC-M02 Micro SIM Card Connector
1. 8 Pin,SMT Type,With Ground Pin*4
2. Dim.: 17.95L x 15.30W x 1.80H mm
3. Metal cover,Hinge type
4. Same side pin footprint
5. Insert-molding for CP8
Hamburg Industries Co., Ltd. All Rights Reserved 2012
ICC-M06 Micro SIM Card Connector
1. 6, 8 Pin,SMT Type
2. Dim.: 15.10L x 13.00W x 1.30H mm
3. Ultra slim
4. Insert-molding for CP8
Hamburg Industries Co., Ltd. All Rights Reserved 2012
ICC-M07 Micro SIM Card Connector
1. 8 Pin,SMT Type
2. Blade Switch: Normally Close
3. Dim.: 18.80L x 17.50W x 1.80H mm
4. With Tray and Push-Pull function (tray should be produced by customer)
5. Same side pin footprint
6. Insert-molding for CP8
Hamburg Industries Co., Ltd. All Rights Reserved 2012
ICC-308 Smart Card Connector
1. 8 Pin,SMT Type (with post)
2. Blade Switch: Normally Open
3. Dim.: 33.58L x 25.20W x 1.30H mm
4. Low profile
5. Same side pin footprint
6. Insert-molding for CP8 & SW
Hamburg Industries Co., Ltd. All Rights Reserved 2012
1. 6, 8 Pin,SMT Type (with post)
2. Blade Switch: Normally Close
3. Dim.: 31.70L x 15.80W x 1.75H mm
4. With Tray and Push-Pull function (tray should be produced by customer)
5. Same side pin footprint,Low profile
6. Insert-molding for CP8 & SW
ICA-563 SIM Card Connector
Hamburg Industries Co., Ltd. All Rights Reserved 2012
1. 8 Pin,SMT Type (post optional),Blade Switch: Normally Close
2. Dim.: 28.16L x 18.60W x 1.45H mm
3. Ultra slim
4. Push-Push type
5. Same side pin footprint
6. Insert-molding for CP8 & SW
ICA-565 SIM Card Connector
Hamburg Industries Co., Ltd. All Rights Reserved 2012
ICA-622 Smart Card Connector
1. 8 Pin,Reverse Type,Blade Switch: Normally Close
2. Dim.: 61.10L x 40.00W x 8.90H mm,Standoff H= 3.00 mm
3. Socket SMT Type, Connector Thru-Hole with board-lock post
Contact pin & Switch pin matched with Socket
4. Aluminum base,With heat-dissipation function
5. EMV & NDS & PCI compliant
Hamburg Industries Co., Ltd. All Rights Reserved 2012
ICA-650 Smart Card Connector
1. 8 Pin,SMT Type (with post)
2. Blade Switch: Normally Open
3. Dim.: 57.30L x 36.20W x 6.52H mm
4. Standoff H= 1.82 mm
5. Aluminum cover,With heat-dissipation function
6. EMV & NDS compliant
Hamburg Industries Co., Ltd. All Rights Reserved 2012
ICA-651 Smart Card Connector
1. 8 Pin,DIP Type,Blade Switch: Normally Close
2. Dim.: 61.10L x 40.00W x 23.00H mm
3. Standoff H= 17.10 mm
4. Thru-Hole with board-lock post & Fork*2
5. Same side pin footprint,High standoff without PCB+Pin header design
6. EMV & NDS & PCI compliant
Hamburg Industries Co., Ltd. All Rights Reserved 2012
ICA-681 Smart Card Connector
1. 8 Pin,DIP Type
2. Blade Switch: Normally Open
3. Dim.: 62.00L x 40.00W x 6.35H mm
4. Thru-Hole with board-lock post
5. EMV & NDS compliant
Hamburg Industries Co., Ltd. All Rights Reserved 2012
ICA-711 Smart Card Connector
1. 8 Pin,SMT Type (with post),Sealed Switch: Normally Open
2. Dim.: 56.60L x 39.00W x 10.18H mm
3. Landing type,High Durability
4. Reverse Type
5. Same side pin footprint,All solder pin hidden from the product outline
6. EMV & PCI compliant
Hamburg Industries Co., Ltd. All Rights Reserved 2012
ICA-713 Smart Card Connector
1. 8 Pin,SMT Type (with post),Sealed Switch: Normally Open
2. Dim.: 57.80L x 38.20W x 6.90H mm
3. Landing type,High Durability
4. Same side pin footprint,All solder pin hidden from the product outline
5. Full of FPC circuit to protect all solder pin
6. EMV & PCI compliant