Recommendations for Good Lighting | 21 Type of area, task or activity E m R a Uo GR L General circulation areas Walkways exclusively for pedestrians 5 20 0.25 50 Traffic areas for slowly moving vehicles (max 10km/h) e.g. bicycles, trucks and excavators 10 20 0.40 50 Regular vehicle traffic (max 40km/h) 20 20 0.40 45 Pedestrian passages, vehicle turning, loading and unloading points 50 20 0.40 50 Airports Hanger apron 20 20 0.10 55 Terminal apron 30 40 0.20 50 Loading areas 50 40 0.20 50 Fuel depot 50 40 0.40 50 Aircraft maintenance stands 200 60 0.50 45 Building sites General lighting at building sites 50 20 Clearance, excavation and loading 20 20 0.25 55 Drain pipes mounting, transport, auxiliary and storage tasks 50 20 0.40 50 Framework element mounting, light reinforcement work, wooden mould and framework mounting, electric piping and cabling 100 40 0.40 45 Element jointing, demanding electrical, machine and pipe mountings 200 40 0.50 45 Canals, locks and harbours Waiting quays at canals and locks 10 20 0.25 50 Gangways and passages exclusively for pedestrians, waiting areas 10 20 0.25 50 Outport embankment ballasting at canals and locks 20 20 0.25 55 Lock control area 20 20 0.25 55 Cargo handling, loading and unloading 50 20 0.25 55 Passenger areas in passenger harbours 50 20 0.40 50 Coupling of hoses, pipes and ropes 50 20 0.40 50 Dangerous part of walkways and driveways (see also parking areas) 50 20 0.40 45 Farms Farm yard 20 20 0.10 55 Equipment shed (open) 50 20 0.20 55 Animals sorting pen 50 20 0.20 45 Fuel filling service stations Vehicle parking and storage areas 5 20 0.25 50 Entry and exit driveways – dark environment 20 20 0.40 45 Entry and exit driveways – light environment (i.e. urban) 50 20 0.40 45 Air pressure and water checking points and other service areas 150 20 0.40 45 Meter reading area 150 20 0.40 45 Industrial sites and storage areas 500 80 Short term handling of large units and raw materials, loading and unloading of solid bulk goods 20 20 0.25 55 Continuous handling of large units and raw materials, loading and unloading of freight, lifting and descending location for cranes, open loading platforms 50 20 0.40 50 Reading of addresses, covered loading platforms, use of tools, ordinary reinforcement and casting tasks in concrete plants 100 20 0.50 45 Demanding electrical, machine and piping installations, inspection 200 60 0.50 45 4.2 Outdoor workplaces
Transcript
Recommendations for Good Lighting | 21
Type of area, task or activity Em Ra Uo GRL
General circulation areasWalkways exclusively for pedestrians 5 20 0.25 50Traffi c areas for slowly moving vehicles (max 10km/h) e.g. bicycles, trucksand excavators 10 20 0.40 50
Building sitesGeneral lighting at building sites 50 20Clearance, excavation and loading 20 20 0.25 55Drain pipes mounting, transport, auxiliary and storage tasks 50 20 0.40 50Framework element mounting, light reinforcement work, wooden mould and framework mounting, electric piping and cabling 100 40 0.40 45
Element jointing, demanding electrical, machine and pipe mountings 200 40 0.50 45
Canals, locks and harboursWaiting quays at canals and locks 10 20 0.25 50Gangways and passages exclusively for pedestrians, waiting areas 10 20 0.25 50Outport embankment ballasting at canals and locks 20 20 0.25 55Lock control area 20 20 0.25 55Cargo handling, loading and unloading 50 20 0.25 55Passenger areas in passenger harbours 50 20 0.40 50Coupling of hoses, pipes and ropes 50 20 0.40 50Dangerous part of walkways and driveways (see also parking areas) 50 20 0.40 45
Fuel fi lling service stationsVehicle parking and storage areas 5 20 0.25 50Entry and exit driveways – dark environment 20 20 0.40 45Entry and exit driveways – light environment (i.e. urban) 50 20 0.40 45Air pressure and water checking points and other service areas 150 20 0.40 45Meter reading area 150 20 0.40 45
Industrial sites and storage areas 500 80Short term handling of large units and raw materials, loading and unloading of solid bulk goods 20 20 0.25 55
Continuous handling of large units and raw materials, loading and unloading of freight, lifting and descending location for cranes, open loading platforms 50 20 0.40 50
Reading of addresses, covered loading platforms, use of tools, ordinaryreinforcement and casting tasks in concrete plants 100 20 0.50 45
Off-shore gas and oil structuresDrill fl oor and monkey board 300 40 0.50 40Rotary table 500 40 0.50 40Regular vehicle traffi c (max 40km/h) 20 20 0.40 45Pedestrian passages, vehicle turning, loading and unloading points 50 20 0.40 50Derrick 100 40 0.50 45Mud sampling room 300 40 0.50 40Test station, shale shaker, wellhead 200 40 0.50 45Process areasPumping areas 200 20 0.50 45Crude oil pumps 300 40 0.50 45Treatment areas 100 40 0.50 45Ladders, stairs, walkways 100 20 0.25 45Plant areas 300 40 0.50 40Boat landing areas transport areas 100 20 0.25 50Life boat areas 200 20 0.40 50Sea surface below the rig 30 20 0.25 50Helideck 100 20 0.40 45
Parking lotsLight traffi c e.g. parking areas of shops, schools, churches, terracedand apartment houses 5 20 0.25 55
Medium traffi c e.g. parking areas of department stores, offi ce buildings, sportsand multipurpose building complexes 10 20 0.25 50
Heavy traffi c e.g. parking areas of major shopping centres, major sports and multipurpose building complexes 20 20 0.25 50
Petrochemical and other hazardous industriesHandling of servicing tools, utilisation of manually regulated valves, starting and stopping motors, lighting of burners 20 20 0.25 55
Filling and emptying of container trucks and wagons with risk free substances, inspection of leakage, piping and packing 50 20 0.40 50
Filling and emptying of container trucks and wagons with dangerous substances, replacements of pump packing, general service work, reading of instruments 100 40 0.40 45
Repair of machines and electrical devices 200 60 0.50 45Fuel loading and unloading sites 100 20 0.40 45
Power, electricity, gas and heat plantsPedestrian movements within electrically safe areas 5 20 0.25 50Handling of servicing tools, coal 20 20 0.25 55Overall inspection 50 20 0.40 50General servicing work and reading of instruments 100 40 0.40 45Wind tunnels – servicing and maintenance 100 40 0.40 45Repair of electric devices 200 60 0.50 45
Railway areasOpen platforms - small stations, rural and local trains 15 20 0.25 50Open platforms - medium size stations, suburban and regional trains 20 20 0.40 45Open platforms - large stations, inter-city services 50 20 0.40 45Covered platforms - medium size stations, suburban and regional trains 50 40 0.40 45Covered platforms - large stations, inter-city services 100 40 0.50 45Stairs - small and medium size stations 50 40 0.40 45Stairs - large stations 100 40 0.50 45Walkways 20 20 0.40 50
Freight areasFreight track – short duration operations 10 20 0.25 50Freight track – continuous operation 20 20 0.40 50Open platforms 20 20 0.40 50Covered platform – short duration operations 50 20 0.40 45Covered platform – continuous operation 100 40 0.50 45Railway yards handling areas 30 20 0.40 50Railway yards – fl at marshalling, retarder and classifi cation yards 10 20 0.40 50Hump areas 10 20 0.40 45Wagon inspection pit 100 40 0.50 40Coupling area 30 20 0.40 45Tracks in passenger station areas, including stabling 10 20 0.25 50Servicing trains and locomotives 20 40 0.40 50Level crossings 20 20 0.40 45
Saw millsTimber handling on land and in water, sawdust and chip conveyors 20 20 0.25 55Sorting of timber on land or in water, timber unloading points and sawn timber loading points, mechanical lifting to timber conveyor 50 20 0.40 50
Reading of addresses and marking of sawn timber 100 40 0.40 45Grading and packaging 200 40 0.50 45Feeding into stripping and chopping machines 300 40 0.50 45
Shipyards and docksShort term handling of large units 20 20 0.25 55Cleaning of ship hull 50 20 0.25 50Painting and welding of ship hull 100 60 0.40 45Mounting of electrical and mechanical components 200 60 0.50 45General lighting of shipyard area, storage areas for prefabricated goods 20 40 0.25 55
Water and sewage plantsHandling of service tools, utilisation of manually operated valves, starting andstopping of motors, piping packing and raking plants 50 20 0.40 45
Handling of chemicals, inspection of leakage, changing of pumps,general servicing work, reading of instruments 100 40 0.40 45
Repair of motors and electric devices 200 60 0.50 45
