Date post: | 04-Apr-2018 |
Category: |
Documents |
Upload: | proarisetfocis |
View: | 224 times |
Download: | 0 times |
of 12
7/30/2019 Handleiding Microfoon Podcast
1/12
(EMC, LVD)
PodcasterInstruction Manual
www.rodemic.com
7/30/2019 Handleiding Microfoon Podcast
2/12
- 2 -
IntroductionThank you for investing in the Podcaster, theworlds first broadcast sound quality USB microphone.
Those of you who are first time customers, maybe interested to know that we are one of the largest andmost respected professional microphone companiesin the world. Our studio microphones are the tonebehind some of the biggest hits of the last decade, andour award winning live performance microphones areon tour daily in 52 countries.
The Podcaster has been designed for anyapplication where recorded voice clarity and directdigital connection is demanded. Designed withPodcasting as a main use, this revolutionary microphoneis also perfect for adding voice-overs while editing
digital video, and for the on location reporter who canquickly record on a laptop and then simply e-mail thisto the studio for instant broadcast.
Just plug in the Podcaster with the supplied USBcable, launch your recording or video editing program
and begin. It is that simple.In the following pages, youll find a detailed descriptionof the features of the Podcaster, as well as astep-by-step instruction for its setup.
Please take the time to visit www.rodemic.com and
register your microphone for a full ten year warranty.While there you can view studio tips and techniques, aswell as browse the comprehensive range of accessoriesfor the Podcaster and other microphones.
Peter Freedman
MicrophonesSydney, Australia
7/30/2019 Handleiding Microfoon Podcast
3/12
- 3 -
SpecificationsAcousticPrinciple:
Dynamic (neodymium) 28mm
ActiveElectronics:
Analogue signal conditioning +A/D and USB interface
DirectionalPattern:
Cardioid
FrequencyRange:
40Hz ~ 14kHz(see graph)
Sensitivity: -51dB re 1V/Pa @ 1kHz(2.8mV @ 94dB SPL)3dB @ 1kHz
Maximum SPL: 115dB
Signal/Noise: >78dB
AnalogueOutput I/F:
Headphone audio output formonitoring. Drives 150mW into32. Output level adjustment.
Resolution: 18bits
Audio ControlI/F:
AC97
PowerRequirement:
Power supplied via USB port
Output
Connection:
USB Digital Interface
Net Weight: 610g (21.5oz)
Packed Weight: 1025g (36oz)
Dimensions 215 x 56 x 52mm8.5 x 2.2 x 2
7/30/2019 Handleiding Microfoon Podcast
4/12
- 4 -
Specifications
Features
Frequency Response
Polar Response
High quality broadcast sound
Dynamic capsule (neodymium) 28mm
18-bit Resolution, 8kHz to 48kHz sampling
Windows and Mac compatible
Tight cardioid pattern for superior off-axis sound
rejection
Powered by USB bus
Includes microphone mount and 3m (40) USBcable
3.5mm stereo headphone jack output with volume
control
Designed and manufactured in Australia
Full 10 year guarantee*
*Online product registration required.
7/30/2019 Handleiding Microfoon Podcast
5/12
- 5 -
Mic Layout
Status LED
Integrated windshield
Locking collarUSB Connection
HeadphoneOutput
HeadphoneVolumeControl
7/30/2019 Handleiding Microfoon Podcast
6/12
- 6 -
The RDE Podcaster is designed for native support inWindows XP, Vista and Mac OS X operating systems.
Installing the Podcaster on Mac OS X
Plug one end of the USB cable into the microphoneand the other end into your USB port on the Mac.
The LED will flash red and then go green toindicate that everything is functioning correctly
with USB power.
The Mac will recognise the USB audio device andautomatically install a universal driver.
To select the Podcaster as the computers new
audio input, open the System Preferences fromthe dock or the main Apple Menu.
Next open the Sound preference and clickthe Input tab. Select RDE Podcaster.
This will allow you to use your Podcaster
through the existing sound recordingsoftware on your Mac.
The Input Volume slider can be used toadjust the sensitivity of the Podcaster.
Installing the Podcaster
7/30/2019 Handleiding Microfoon Podcast
7/12
- 7 -
The following example is for setting up the Podcasterin Windows XP Service Pack 2. Other versions mayvary slightly.
Installing the Podcaster on Windows XP
Plug one end of the USB cable into the microphoneand the other end into your PC.
The LED should flash red and then go green to
indicate that everything is functioning correctlywith USB power.
The PC will recognise the USB audio device andautomatically install a universal driver.
To select the Podcaster as the computers newaudio input, open Sounds and Audio Devicesthrough the Control Panel.
This is usually done by going to Start/ControlPanel and selecting the Sounds and AudioDevices icon.
Click on the Audio tab, and under the SoundRecording option, you should now be ableto select RDE Podcaster as your defaultdevice.
This will allow you to use your Podcaster
through the existing sound recordingsoftware on your PC.
The level slider under Volume can be used toadjust the sensitivity of the Podcaster.
Installing the Podcaster
7/30/2019 Handleiding Microfoon Podcast
8/12
- 8 -
Setting up the PodcasterSetting the sound level correctly
The first step in setting up your recordingenvironment is to get a good Sound Level on
your equipment. This is done to ensure thatyou do not exceed the level of sound that yourequipment can handle before it distorts thesignal and at the same time, ensuring that thesound is not too low and indistinguishable.
By adjusting the recording volume slider youshould be able to set a reasonable level veryquickly.
The way to do this is to set the Podcaster up infront of you and raise the slider control whileyou are speaking at the same level you will use
when recording. (see pages 6 & 7 for operatingsystem control, or refer to your applicationdocumentation for native instruction).
If your slider control features a graphic levelyou will be able to gauge an appropriate level
slightly below where the level reaches anoverload (typically red).
Your recording will now be set at a useful level.Experimentation with this will allow you to finetune your recordings over time.
Talking in to your Podcaster
The Podcaster is an end address microphone.This simply means that to get the clearest
sound, you must talk directly into the front ofthe microphone as shown below. When you aretalking into the microphone you should be ableto clearly see the green status LED.
7/30/2019 Handleiding Microfoon Podcast
9/12
- 9 -
Setting up the PodcasterPositioning your Podcaster
You will find that where you position yourPodcaster will alter the quality of the sound.
Environment and background noise will varyevery time a microphone is moved to a differentlocation. The most successful method tooptimise the sound you want is to try variouspositions and isolate the recording environmentfrom external noise sources as much as possible.
Proximity ef fect is an increased bass responsewhich happens when you are close to themicrophone. This can be used in a positive wayto enhance the quality of your voice, but becareful as being too close may increase the bass
response too much which will distort the sound.
Connecting headphones to your Podcaster
A unique feature of your Podcaster is thein-built, high level, headphone amplifier.
Simply connect the 3.5mm jack from yourheadphones, and adjust the volume control onthe microphone and you have direct monitoringof the sound from the microphone.
The advantage of connecting the headphonesdirectly to the microphone is that you are ableto hear exactly what you are recording before itis recorded. This allows for more accurate finetuning and should reduce the need to re-record
as problems can be detected earlier in therecording process.
7/30/2019 Handleiding Microfoon Podcast
10/12
- 10 -
Setting up the PodcasterMounting the Podcaster
The Podcaster comes with a stand mount thatwill allow you to connect it to a microphone
stand or Anglepoise style arm such as theRDE PSA-1.
The mount comes with a 3/8 brass insert thatcan be removed. Once removed the internalthread of the mount is a 5/8 thread. This allowsthe mount to be used on either a US 5/8 standor pole or a Euro 3/8 stand or pole.
Also on the mount is a thumb screw which whenloosened will allow the mount to rotate to enableyou to angle your microphone to the mostappropriate direction.
To mount the microphone into the clip follow thesteps below.
Remove the locking collar from the base ofthe microphone.
Slide the base of the microphone into thehole in the stand mount.
Screw the locking collar back into position tocarefully secure the Podcaster to the mount.
Now, loosen the thumbscrew on the standmount and adjust the microphone tothe desired angle. Once set, tighten thethumbscrew to secure the microphone inplace.
7/30/2019 Handleiding Microfoon Podcast
11/12
- 11 -
Setting up the PodcasterUsing the PSM-1 mount (optional)
For additional vibration isolation, the Podcastercan be fitted to the optional PSM-1 spider
shock mount. The PSM-1 is a recommendedand useful addition to any recording facilityas it significantly reduces unwanted noisetransmission to the microphone.
First screw the PSM-1 shock mount ontoyour mic stand, boom arm or Anlgepoisestyle arm. If youre using a US 5/8 micstand or boom, remove the 3/8 insert.
Remove the locking collar from the baseof the Podcaster and store it away in a safeplace where it will not get lost.
Install the Podcaster into the PSM1 by fittingthe microphone into the center of the weband onto the bottom mounting plate.
There is a captive locking collar in the centreof the shock mount which will screw onto thethread on the bottom of the Podcaster.
Rotate the captive locking collar to securethe Podcaster firmly in the shock mount.
Loosen the thumb screw on the PSM1 shockmount to adjust the angle of the Podcasterand position it to the desired location.Once set, tighten the thumbscrew to securethe Podcaster in place.
Note: Be careful not to over tighten thethumbscrew as this could cause cross threadingand the mount will not maintain the correctangle if this occurs.
7/30/2019 Handleiding Microfoon Podcast
12/12
12
WarrantyAll microphones are warranted for one year
from date of purchase. You can extend that to a full
ten years if you register online at www.rodemic.com.
The warranty covers parts and labour that may be
required to repair the microphone during the warranty
period. The warranty excludes defects caused by
normal wear and tear, modification, shipping damage,
or failure to use the microphone as per the instruction
guide.
If you experience any problem, or have any questions
regarding your microphone, first contact the
dealer who sold it to you. If the microphone requires a
factory authorised service, return will be organised by
that dealer.
We have an extensive distributor/dealer network, butif you have difficulty getting the advice or assistance
you require, do not hesitate to contact us directly.
Microphones
InternationalPO Box 6685Silverwater NSW 2128 AustraliaPh: +61 2 9648 5855Fax: +61 2 9648 2455
USAP.O. Box 4189Santa Barbara, CA 93140-4189Ph: 805 566 7777Fax: 805 566 0071
Technical SupportFor information and technical support questions contact:[email protected]
In the Unites States and Puerto Rico, contact
[email protected] or call 805 566 7777
In Australia, contact [email protected] or call (02) 9648 5855
Anywhere except Australia, the United States and Puerto Rico,contact [email protected] or call +61 2 9648 5855