Hilti HPS Submission Folder - Home - Hilti HongKong · Hilti HPS Submission Folder ... (State...

Submission folder

Customer Hotline Customer Hotline Hong Kong 8228 8118Macau (Toll free) 00800- 8228 8118

Hilti HPS Submission Folder

Sample Submissionand Approval Form 2 - 3

Product Information 4 - 5

Technical Data 6 - 8

Method Statement 9

Test Reports 10 - 17

Government Letter 18 - 19

Country of Origin 20

Job Reference 21 - 24

Page 1 of 2

SAMPLE SUBMISSION AND APPROVAL FORM

Contract Title: ________________________________ Ref. No.: ________________________

________________________________ Date: ________________________

Ref. No. of Previous Submission:

________________________

Contract No: ________________________________ (1) ________________________

File Reference: ________________________________ (2) ________________________

DETAILS OF SUBMISSION

To: Contract Manager’s Representative Attention: ________________________

From: ________________________________

The enclosed sample and catalogue* / certificate of origin* / technical data* / test report* / job reference* as described below have been checked for compliance with the Specifications and Drawings, and are submitted for approval. 1. General Information

a. Material Description HPS-1 / HPS-1R impact anchor __________________________________________________________ __________________________________________________________ b. Location: __________________________________________________________ __________________________________________________________ __________________________________________________________ c. Specification Ref. Page: __________________________ Item: _______________________ __________________________ _______________________ __________________________ _______________________ d. Drawing Ref. No. __________________________________________________________ __________________________________________________________ __________________________________________________________ e. B.Q. Ref.No.: __________________________________________________________ __________________________________________________________ __________________________________________________________ f. Anticipated date of approval: __________________________________________________________

2. Technical Information

The submitted sample has been checked against the specification and drawings as listed below:-

Specification Requirements Submitted Sample (State details against each item)

a. Brand Not specified Hilti b. Country of Origin Not specified Liechtenstein c. Manufacturer’s Name & Address Not specified Hilti Corporation, FL-9494 Principality of Liechtenstein d. Factory’s Name & Address(es) Not specified Hilti Aktiengesellschaft, Hilti AG, Feldkircherstrasse, FL-9494 Schaan, Liechtenstein e. Supplier (with Applicator, if any) Not specified Hilti (Hong Kong) Ltd

Page 2 Feb 2010

Page 2 of 2

f. Appearance Not specified According to the sample submitted g. Color + Not specified NIL h. Specification Not specified Attached i. Manufacturer’s Catalogue Not specified Attached j. Test Report (Original/Certificated True Copy) Not specified Attached k. Previous Job Reference Not specified Attached l. Supplementary Information Not specified NIL For and on behalf of the Contractor ____________________________

(Quality Control Manager)

CONTRACT MANAGER’S COMMENTS To: From: Contract Manager’s Representative: ________________________________

On the basis of the sample and information given, the above sample submitted is:

(1) * Approved. (2) * Not approved because ____________________________________________________ _______________________________________________________________________ _______________________________________________________________________ Remarks: _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ Approval does not alter the requirements of the Contract Contract Manager’s Representative: ____________________________

_____________________________ Date:

cc. _______________________________________ _______________________________________ _______________________________________ _______________________________________ (* Delete if appropriate) (+ For glass or vitreous mosaic tiles, the contractor is required to confirm the colour range(s) of the submitted sample, i.e. a) light and or medium; or b) dark)

Page 3 Feb 2010

Anchoring Systems

271 Customer Hotline: Hong Kong 8228 8118 Macau 00800 8228 8118 (Mon - Fri 8:30 am - 6:00 pm / Sat 8:30 am - 1:00 pm) | Hilti online: www.hilti.com.hk★ Special Request

HPS-1 impact anchorBase material■ Concrete■ Brick, sand-lime brick, hollow brick and gas concrete

Use■ For fastening pipes and cables, wood battens and components for electrical fitting■ An anchor for solid and hollow base material for rapid installation without using a screwdriver

Material■ High-quality polyamide PA 6.6 (cadmium free)■ Screw made of galvanized steel to min 5 µm or A2 stainless steel

Benefits■ Suitable for all kinds of base

material■ Expanding head opens in hollow

base material for providing reliable keying effect

■ Can be set with hammer or screwdriver for quick and easy installation

■ Removable

Model Size 4/10 5/10 5/5 -5/15 6/10 - 6/25 6/30 - 6/40 8/10 8/10 - 8/40 8/60 - 8/100

HPS-1 Tensile Load, Nrec 0.05 0.10 0.15 0.25 0.25 0.30 0.40 0.40

at concrete 30 N/mm² Shear Load, Vrec 0.15 0.30 0.35 0.55 0.35 0.50 0.90 0.50

HPS-1 Tensile Load, Nrec - - 0.08 0.10 0.10 - 0.15 0.15

at aerated concrete PB-4²) Shear Load, Vrec - - 0.10 0.12 0.10 - 0.30 0.20

Remarks:1) All the data applies to no edge distance, spacing and other influences 2) Holes must be produced by rotary drilling only3) For detail design method, please reter to Fastening Technology Manual

Technical dataRecommended load (kN), safety factor(�)=5

Installation procedures

l

hnom

h1

dn

tfix

do

HPS-1 programme

Drill bit nom. Min. hole Anchor Head fasten. Order designation dia., do depth,h1 length, I dia, dn thk. tfix Package Item no (mm) (mm) (mm) (mm) (mm) (pcs)

HPS-1: galr. to 5µm 4 25 21.5 7.0 2 250 HPS-1 4/0x20 260369 ★ 5 25 22.0 7.5 2 250 HPS-1 5/0x20 260395 ★ 5 30 27.0 9.5 5 200 HPS-1 5/5x25 260347 ★ 5 30 32.0 9.5 10 200 HPS-1 5/10x30 230515 ★ 5 30 37.0 9.5 15 200 HPS-1 5/15x35 260348 6 40 27.0 11.0 2 150 HPS-1 6/0x25 238159 ★ 6 40 32.0 11.0 5 150 HPS-1 6/5x30 260349 ★ 6 40 37.0 11.0 10 150 HPS-1 6/10x35 230516 6 40 42.0 11.0 15 150 HPS-1 6/15x40 260350 6 40 52.0 11.0 25 100 HPS-1 6/25x50 260351 6 40 57.0 11.0 30 100 HPS-1 6/30x55 230517 6 40 67.0 11.0 40 100 HPS-1 6/40x65 260352

Page 4 Feb 2010

Anchoring Systems

272Customer Hotline: Hong Kong 8228 8118 Macau 00800 8228 8118 (Mon - Fri 8:30 am - 6:00 pm / Sat 8:30 am - 1:00 pm) | Hilti online: www.hilti.com.hk

10

★ Special Request

Drill bit nom. Min. hole Anchor Head fasten. Order designation dia., do depth,h1 length, I dia, dn thk. tfix Package Item no (mm) (mm) (mm) (mm) (mm) (pcs)

HPS-1: galvanized steel to 5µm 8 50 28.5 13.0 2 100 HPS-1 8/0x25 238160 ★ 8 50 42.5 13.0 10 100 HPS-1 8/10x40 260353 ★ 8 50 52.5 13.0 20 50 HPS-1 8/20x50 230518 8 50 62.5 13.0 30 50 HPS-1 8/30x60 260354 ★ 8 50 72.5 13.0 40 50 HPS-1 8/40x70 230519 8 50 92.5 13.0 60 50 HPS-1 8/60x90 260355 8 50 112.5 13.0 80 50 HPS-1 8/80x110 260356 ★ 8 50 132.5 13.0 100 100 HPS-1 8/100x130 260367 ★

HPS-1: A2 stainless steel 5 30 27.0 9.5 5 200 HPS-1R 5/5x25 260357 ★ 5 30 32.0 9.5 10 200 HPS-1R 5/10x30 230524 ★ 5 30 37.0 9.5 15 200 HPS-1R 5/15x35 260358 ★ 6 40 27.0 11.0 2 150 HPS-1R 6/0x25 238161 ★ 6 40 32.0 11.0 5 150 HPS-1R 6/5x30 260359 ★ 6 40 37.0 11.0 10 150 HPS-1R 6/10x35 230525 ★ 6 40 42.0 11.0 15 100 HPS-1R 6/15x40 260360 6 40 52.0 11.0 25 100 HPS-1R 6/25x50 260361 ★ 6 40 67.0 11.0 40 100 HPS-1R 6/40x65 260362 8 50 42.5 13.0 10 100 HPS-1R 8/10x40 260363 ★ 8 50 62.5 13.0 30 50 HPS-1R 8/30x60 260364 ★ 8 50 92.5 13.0 60 50 HPS-1R 8/60x90 260365 ★ 8 50 112.5 13.0 80 50 HPS-1R 8/80x110 260366 ★

Page 5 Feb 2010

154 Issue 2007/08

HPS-1 impact anchor

Page 6 Feb 2010

Issue 2007/08 155

B

Design resistance, Rd [kN]:

Anchor size

Base material

HPS-14/0

HPS-15/0

HPS-15/5-5/15

HPS-16/0-6/25

HPS-16/30-6/40

HPS-18/0

HPS-18/10-8/40

HPS-18/60-8/100

NRd 0.07 0.14 0.21 0.35 0.35 0.42 0.56 0.56Non-cracked concrete, fcc= 20 – 45 N/mm2

VRd 0.21 0.42 0.49 0.77 0.49 0.70 1.26 0.70

NRd 0.07 0.14 0.21 0.35 0.35 0.42 0.56 0.56Engineering brick, 12 hole, class B

VRd 0.21 0.42 0.49 0.77 0.49 0.70 1.26 0.70

NRd 0.07 0.14 0.21 0.28 0.28 0.35 0.42 0.42Perforated brick, 3 hole cammon

VRd 0.21 0.42 0.49 0.77 0.49 0.7 1.26 0.77

NRd - - 0.11 0.21 0.21 0.28 0.35 0.35Themalite block, 7 N lightweight

VRd - - 0.21 0.35 0.21 0.56 0.56 0.35

Themalite block, NRd - - 0.07 0.11 0.11 - 0.17 0.17

½ N lightweight VRd - - 0.14 0.21 0.14 - 0.35 0.21

NRd - - 0.11 0.14 0.14 - 0.21 0.21Aerated concrete, PB 4, PB 6 1)

VRd - - 0.14 0.17 0.14 - 0.42 0.28

NRd 0.07 0.14 0.21 0.28 0.28 0.35 0.49 0.49Extruded brick, Boral 10

VRd 0.21 0.35 0.42 0.56 0.35 0.7 1.26 0.77

Recommended load, Lrec [kN]:

Anchor size

Base material

HPS-14/0

HPS-15/0

HPS-15/5-5/15

HPS-16/0-6/25

HPS-16/30-6/40

HPS-18/0

HPS-18/10-8/40

HPS-18/60-8/100

NRec 0.05 0.1 0.15 0.25 0.25 0.3 0.4 0.4Non-cracked concrete, fcc= 20 – 45 N/mm2

VRec 0.15 0.3 0.35 0.55 0.35 0.5 0.9 0.5

NRec 0.05 0.1 0.15 0.25 0.25 0.3 0.4 0.4Engineering brick, 12 hole, class B

VRec 0.15 0.3 0.35 0.55 0.35 0.5 0.9 0.5

NRec 0.05 0.1 0.15 0.2 0.2 0.25 0.3 0.3Perforated brick, 3 hole cammon

VRec 0.15 0.3 0.35 0.55 0.35 0.5 0.9 0.55

NRec - - 0.08 0.15 0.15 0.2 0.25 0.25Themalite block ,7 N, lightweight

VRec - - 0.15 0.25 0.15 0.4 0.4 0.25

Themalite block, NRec - - 0.05 0.08 0.08 - 0.12 0.12

½ N lightweight VRec - - 0.1 0.15 0.1 - 0.25 0.15

NRec - - 0.08 0.1 0.1 - 0.15 0.15Aerated concrete, PB 4, PB 6 1)

VRec - - 0.1 0.12 0.1 - 0.3 0.2

NRec 0.05 0.1 0.15 0.2 0.2 0.25 0.35 0.35Extruded brick, Boral 10

VRec 0.15 0.25 0.3 0.4 0.25 0.5 0.9 0.55

1) Hole drilled with TE-CX drill bit, without hammering action.At temperatures above 40 °C, the recommended loads should be reduced if there is a sustained tensile load.

Setting details

l

dn

~ 2mm

tfixhnom

h1

do

HPS-1 impact anchor

Page 7 Feb 2010

156 Issue 2007/08

Anchor size HPS-1

Setting details 4/0 5/0 5/5 5/10 5/15 6/0 6/5 6/10 6/15 6/25 6/30 6/40

d0 [mm] Drill bit diameter 4 5 5 5 5 6 6 6 6 6 6 6

h0 [mm] Hole depth 25 25 30 30 30 40 40 40 40 40 40 40

hnom [mm] Anchorage depth 20 20 20 20 20 25 25 25 25 25 25 25

tfix [mm]Fixture(fastenable)thickness

2 2 5 10 15 2 5 10 15 25 30 40

l [mm] Anchor length 21.5 22 27 32 37 27 32 37 42 52 57 67

dn [mm] Head diameter 7 7.5 9.5 9.5 9.5 11 11 11 11 11 11 11

Drill bit - TE-C3X-5/12 TE-C3X-6/12

Anchor size HPS-1

Setting details 8/0 8/10 8/20 8/30 8/40 8/60 8/80 8/100

d0 [mm] Drill bit diameter 8 8 8 8 8 8 8 8

h0 [mm] Hole depth 50 50 50 50 50 50 50 50

hnom [mm] Anchorage depth 25 30 30 30 30 30 30 30

tfix [mm]Fixture(fastenable)thickness

2 10 20 30 40 60 80 100

l [mm] Anchor length 28.5 42.5 52.5 62.5 72.5 92.5 112.5 132.5

dn [mm] Head diameter 13 13 13 13 13 13 13 13

Drill bit TE-C3X-8/17

Installation equipment

Rotary hammer (TE1, TE 2; TE5, TE6, TE6A, TE15, TE15-C or TE18-M), a hammer, a Pozi cross-recess screwdriver, size 2 or 1, or a screwdriver with Pozi cross-recess bit, size 2 or 1.

Setting operations

Drill hole with drill bit Install anchor. Hammer in anchor.

Drill hole with drill bit. Install anchor. Drive in anchor.

HPS-1 impact anchor

Page 8 Feb 2010

Customer Hotline: Hong Kong 8228 8118 | Macau 00800 8228 8118 | (Mon – Fri 8:30 am – 6:00 pm / Sat 8:30 am – 1:00 pm)

Page 1 of 1

Hilti HPS-1 Impact Anchor

SETTING OPERATION Hilti HPS-1 Impact Anchor Versions : HPS-1 / HPS-1R Accessories : NIL Reference : Product Information / Fastening Technology Manual

Setting Operation: 1. Drill the hole with drill bit

2. Install anchor 3. Hammer in anchor

# Drill the hole in gypsum fibreboard, chipboard and drywall panel without hammering action or use the cordless screwdriver with a twist drill.

Page 9 Feb 2010

Page 10 Feb 2010

Page 11 Feb 2010

Page 12 Feb 2010

Page 13 Feb 2010

Page 14 Feb 2010

Page 15 Feb 2010

Page 16 Feb 2010

Page 17 Feb 2010

Page 18 Feb 2010

Page 19 Feb 2010

Page 20 Feb 2010

Ref No Date Project Contractor Consulting Engineer Product Application

Job/Application Reference20-Feb-10

39483 11-09 One Central Macau LEUNG YAU IRON ENG CO Impact anchor HPS-1 8/40X70 decoration fixing

38851 08-09 One Central Macau YAH SHUN COMPANY LIMITED

Impact anchor HPS-1 R 6/40X65 decoration fixing

38630 08-09 PTM Projects - Sun Hung Kai APEX (BUILDING MATERIALS) CO LTD

Impact anchor HPS-1 6/40X65 kitchen cabinet fixing

38629 08-09 PTM Projects - Sun Hung Kai APEX (BUILDING MATERIALS) CO LTD


38576 08-09 One Central Macau B.S.C. INTERIOR CONTRACT AND




38310 07-09 PTM Projects - Gammon REX DECORATION LTD Impact anchor HPS-1 6/30X55 earth line fixing


Impact anchor HPS-1 8/60X90 decoration fixing







37746 05-09 PTM Projects - Sun Hung Kai MING KEE DECORATION WORKS


37400 03-09 Airport CRAFT PROJECTS INTERNATIONAL

Impact anchor HPS-1 6/25X50 steel bracket fixing

37349 03-09 PTM Projects - Shui On GOLDENWALL ENGINEERING LTD

Impact anchor HPS-1 R 8/40X70 cladding / pre-cast panel fixing

36891 02-09 One Central Macau PERMASTEELISA MACAU LIMITED

Impact anchor HPS-1 6/40X65 hanger fixing

17/F, Tower 6, China Hong Kong City, 33 Canton Road, Tsimshatsui, Kowloon, Hong Kong. 1Hotline : 8228 8118 Fax : 29541751


Job/Application Reference20-Feb-10

36860 02-09 Union Square 7, Kowloon Station EASTERN WOODWARE ENGINEERING
















36728 02-09 PTM Projects - Hip Hing B.S.C. INTERIOR CONTRACT AND


37033 02-09 One Central Macau HUNG FAI DECORATION (MACAU) LTD


36514 01-09 KCRC Tai Wai Depot KPA ENGINEERING LTD Impact anchor HPS-1 6/10X35 decoration fixing

36700 01-09 KCRC Fo Tan Depot - Ho Tung Lau PANG'S ENG LTD Impact anchor HPS-1 6/0X25 kitchen cabinet fixing

17/F, Tower 6, China Hong Kong City, 33 Canton Road, Tsimshatsui, Kowloon, Hong Kong. 2Hotline : 8228 8118 Fax : 29541751Page 21 Feb 2010


Job/Application Reference20-Jul-09

33677 12-08 One Central Macau PAK KAI ENG CO Impact anchor HPS-1 6/25X50 decoration fixing

33167 12-08 Union Square 7, Kowloon Station WITTY SATO ENG CO LTD Impact anchor HPS-1 8/20X50 decoration fixing


33165 12-08 Lohas Park Phase 1 & Phase 2 GRANDPRIX INTERIOR CONTRACT AND

Impact anchor HPS-1 5/15X35 suspension ceiling fixing

33459 12-08 Union Square 7, Kowloon Station PERMASTEELISA HONG KONG LTD

Impact anchor HPS-1 8/40X70 curtain wall fixing

33747 12-08 Wynn Macau Casino PERMASTEELISA MACAU LIMITED


32381 11-08 One Island East JOSEF GARTNER & CO (HK) LTD




32828 11-08 One Central Macau YAH SHUN COMPANY LIMITED

Impact anchor HPS-1 6/40X65 fixing on gypsum panel

32023 11-08 Airport PAK FAI ENG LTD Impact anchor HPS-1 5/15X35 broadband equipment fixing




33001 11-08 Union Square 7, Kowloon Station HEI LEE STEEL IRON ENG Impact anchor HPS-1 6/15X40 kitchen cabinet fixing

31123 10-08 PTM Projects - Hsin Chong HSIN CHONG - YAU LEE JOINT VENTURE

Impact anchor HPS-1 6/15X40 sanitary equipment






31237 10-08 Union Square 7, Kowloon Station PERMASTEELISA HONG KONG LTD


31464 10-08 Shangri-la and Traders HotelsSheraton and St. Regis Hotels

(Parcel 5&6)

G & M ENG CO LTD Impact anchor HPS-1 6/10X35 decoration fixing


(Parcel 5&6)

G & M ENG CO LTD Impact anchor HPS-1 6/15X40 decoration fixing


(Parcel 5&6)

GREAT HARVEST CONSTRUCTION LIMITED


31169 10-08 Airport UNISON PROJECTS CO LTD Impact anchor HPS-1 6/15X40 cladding / pre-cast panel fixing


(Parcel 5&6)

GREAT HARVEST CONSTRUCTION LIMITED




30087 09-08 PTM Projects - Paul Y PERMASTEELISA HONG KONG LTD


30038 09-08 Lok Ma Chau - Others BALFOUR BEATTY LAM JOINT VENTURE

KCRC Impact anchor HPS-1 6/15X40 lighting euqipment fixing

29729 09-08 Lohas Park Phase 1 & Phase 2 POTEX INTERIOR DECORATION & DESIGN



30097 09-08 KCRC ABON CURTAIN WALL & ENGINEERING

Impact anchor HPS-1 6/0X25 window fixing

29711 09-08 PTM Projects - China State EASTERN GROWING ENGINEERING CO LTD


29709 09-08 Airport PAK FAI ENG LTD Impact anchor HPS-1 5/15X35 block work fixing




29720 09-08 PTM Projects - Sun Hung Kai WITTY SATO ENG CO LTD Impact anchor HPS-1 8/20X50 decoration fixing

29721 09-08 KCRC EASTERN GROWING ENGINEERING CO LTD


29736 09-08 Union Square 7, Kowloon Station WITTY SATO ENG CO LTD Impact anchor HPS-1 8/30x60 (25) decoration fixing



28709 08-08 Lohas Park Phase 1 & Phase 2 YEE HONG KEE WOOD WORKS CO LTD


28710 08-08 Lohas Park Phase 1 & Phase 2 YEE HONG KEE WOOD WORKS CO LTD


28698 08-08 Lohas Park Phase 1 & Phase 2 SUNDART TIMBER PRODUCTS CO LTD




28382 07-08 Four Seasons Hotel, Macau (Parcel 2) GREAT HARVEST CONST. (MACAU) CO LTD


27953 07-08 PTM Projects - Hanison PERFECT TEAM CORPORATION LTD


28547 07-08 MGM Grand Macau WAI HING STEEL & ALUMINIUM


27922 07-08 Airport UNISON PROJECTS CO LTD Impact anchor HPS-1 8/20X50 cladding / pre-cast panel fixing






26938 06-08 PTM Projects - Sun Hung Kai PERMASTEELISA HONG KONG LTD






(Parcel 5&6)

G & M ENG CO LTD Impact anchor HPS-1 6/10X35 u-channel fixing

26934 06-08 PTM Projects - Paul Y UNITED RELIANCE CORP LTD Impact anchor HPS-1 8/60X90 window fixing

26924 06-08 PTM Projects - Hanison PERFECT TEAM CORPORATION LTD


26954 06-08 How Ming Street Commercial Development

PERMASTEELISA HONG KONG LTD

Arthur C S Kwok / Thomas Anderson




27177 06-08 Wynn Macau Casino PERMASTEELISA MACAU LIMITED



26079 05-08 City of Dreams Resort GENYIELD CONSTRUCTION CO LTD

Impact anchor HPS-1 R 5/5X25 u-channel fixing





25921 05-08 PTM Projects - Paul Y PERMASTEELISA HONG KONG LTD








23822 04-08 PTM Projects - Cheung Kong POLYFAIR CONSTRUCTION & Impact anchor HPS-1 5/15X35 window fixing










23399 04-08 PTM Projects - Paul Y EASTERN GROWING ENGINEERING CO LTD


23641 04-08 Kowloon Southern Link (KSL - Link200, 300 & 400)

LINK 200 JOINT VENTURE Impact anchor HPS-1 5/10X30 temporary M&E fixing



23161 03-08 MGM Grand Macau NEW EMPIRE (MACAU) KITCHEN CABINET


22669 03-08 PTM Projects - Paul Y EASTERN GROWING ENGINEERING CO LTD






22970 03-08 PTM Projects - Paul Y POLYFAIR CONSTRUCTION & Impact anchor HPS-1 5/15X35 cladding / pre-cast panel fixing

22486 02-08 Union Square Phase 7 HO YIK ENG CO OAP / JRP Impact anchor HPS-1 8/60X90 decoration fixing

22626 02-08 One Island East HOI YEUNG MAN HO ENGINEERING LTD

Impact anchor HPS-1 8/20X50 broadband equipment fixing

22337 02-08 How Ming Street Commercial Development

EASTERN GROWING ENGINEERING CO LTD

Arthur C S Kwok / Thomas Anderson


22113 01-08 City of Dreams Resort GENYIELD CONSTRUCTION CO LTD

Impact anchor HPS-1 R 5/5X25 waterproof membrance fastening




22075 01-08 Redevelopment of Tin Kwong Road Police Quarters

POLYFAIR CONSTRUCTION & OAP Impact anchor HPS-1 6/15X40 steel hanger fixing

22085 01-08 Science Park Phase 2 WELFACT COMPANY LIMITED Meinhardt / Maunsell Impact anchor HPS-1 8/20X50 suspension ceiling fixing

22013 01-08 Fanling Area 36 Phase 1 PERFECT TEAM CORPORATION LTD

Impact anchor HPS-1 5/5X25 cladding / pre-cast panel fixing

22012 01-08 Fanling Area 36 Phase 1 PERFECT TEAM CORPORATION LTD

Impact anchor HPS-1 5/15X35 cladding / pre-cast panel fixing


Date post:	29-Apr-2018
Category:	Documents
Upload:	hamien
View:	240 times
Download:	2 times

Hilti HPS Submission Folder - Home - Hilti HongKong · Hilti HPS Submission Folder ... (State...

Documents