PR
ELIM
INA
RY
INFO
RM
ATIO
N
www.technoshell.com
Hot Foil StampingSTM 500 LC
Auto cap feedingBowl feeder with noise reducing enclosureHeat transfer capabilityCan be integrated with upline / downline machinesRemote DiagnosticsPassword and user log facilityNoise reduction enclosure for bowl feeder
Optionals
Application
Hot foil stamping and heat transfer machine designed for decorating cylindrical (round) and conical (tapered) caps.
Features
Rigid frame constructionLinear slides for all motionsStepper motor drive for carriage stroke andspeed control for achieving higher speedsAdjustable pneumatic stroke for achieving higher speedsStepper motor drive for foil advance to reduce wastage4-axis adjustable stamping headTouch screen operator interface adjustable for height & angle 3 side safety enclosureLanguage options for different countriesMultiple sensors such as foil break sensor, low pressure sensor, cap non-ejection sensor
G - 49, M.I.D.C., Ambad, Nashik - 422010. INDIA
Ph.: +91 253 6647 300, +91 253 6627 300.Email: [email protected] URL: www.technoshell.com
Hot Foil StampingSTM 500 LC
Technical SpecificationsMachine Speed : up to 30 Caps / minuteCylindrical Stamping : Dia - 60mm (max) | Width - 75mm (max)Conical Stamping : Max developed area - 200mmx100mm*Maximum Angle of Cone*Flat Stamping : Max stamping area - 200mmx100mmHeater : Cartridge heaters - 1600 wattAir Supply : 7-10 BarAir Consumption (at 6bar) : 300LPM (0.3m3min)Electrical Supply : L1, L2, L3, N, PESupply Voltage : 415 VAC, 50/60 HzSupply Current : 6 AmpsLoad : 2.5kWMachine Weight without bowl feeder : approx. 800kgMachine Weight with bowl feeder : approx. 1020 kg
Layout :