Vintage Ford & Chevrolet Parts of Arizonawww.so-calspeedshopAZ.com
BOOKS
HOW TO BUILD A HOT ROD CHASSISThis book, by Tim Remus, focuses on how we build traditional-style hotrods at So-Cal Speed Shop.HOT ROD CHASSIS MOT-129795-AP 19.99 EA
HOW TO BUILD A TRADITIONAL HOT RODBy Mike Bishop and Vern Tardel, this one takes you step-by-stepthrough building a traditional roadster.HOW TO: ROADSTER MOT-130550-AP 25.95 EA
HOW TO HOP UP FORD & MERC V8 ENGINESWritten by the guru, Roger Huntington, and originally published in1951, this is a great tuning guide.HOW TO HOP UP MOT-126672-AE 14.95 EA
SOUPING THE STOCK ENGINEAlso by Roger Huntington, Souping gives even more tuning andbuilding tips on the Ford Flathead V8.SOUPING THE STOCK V8 MOT-124988-AE 14.95 EA
FLATHEAD FEVERThis one was written recently by Mike Davidson who has plenty of up-to-date flattie tuning experience.FLATHEAD FEVER MOT-123830-AE 16.95 EA
THE BIRTH OF HOT RODDINGThe Story of the Dry Lakes Era. Written by Robert Genat and Don Cox,this book follows the beginnings of the dry lakes and salt flat racing andthe hot rodding phenomenon.BIRTH OF HOT RODDING MOT-135761-AP 38.99 EA
BEST OF HOT ROD 1949-59Take a trip back in time with Hot Rod Magazine’s best cars, originaladvertising and editorial material from the great old days.BEST OF HOT ROD MOT-134908-AP 24.99 EA
HOT RODAs long as the lake are dry, David Perry’s book will have a place on ourshelves. With words by celebrated author, Barry Gifford, this is one ofthe best pictorial anthologies of the hot rod culture we have ever seen.HOT ROD SOC-068-0811815935
REBUILDING THE FAMOUS FORD FLATHEADHow-to book on completely rebuilding the 1932-53 Ford Flathead V8.This has step-by-step, easy to follow instructions with some illustrations.REBUILD FLATHEAD MAC-VB-124 18.99 EA
FLAT OUTWritten by Albert Drake, with over 200 pages, this is a great chronicle ofearly hot rodding and dry lakes racing. Mostly previously unpublishedphotographs from private collections.FLAT OUT MOT-016-121097
REAR VIEW MIRRORCompiled by the California Museum of Photography UniversityCalifornia Riverside in cooperation with the Automobile Club ofSouthern California, this is a stunning collection of images automotive-everything from dry lakes racing to Marilyn Monroe.REAR VIEW MIRROR SOC-145-1-2700
FIFTIES FLASHBACKDon’t let the cover fool you, this book is a compilation of 16 years of“Fifties Flashbacks” columns written by Albert Drake for Rod Actionmagazine. Its 256 pages are packed full of old images, ads, memorabiliaand stuff that tells it like it was. Great reference.FIFTIES FLASHBACK MOT-136339-AE 19.95 EA
HOW TO WIRE YOUR HOT RODExcellent book on how to wire your hot rod. This book has easy tofollow illustrations and schematics.HOW TO WIRE PAR-PRR-WIRE 10.99 EA
6 TO 12 VOLT CONVERSION BOOKGreat book to walk you through converting your car from 6 volt to 12volt. Full of information.6-TO-12 VOLT BOOK MIS-12V-BOOK 9.99 EA
WHEELS & HUBCAPS
STAINLESS HUB CAPSThese new stainless caps are reproductions of the originals and will fiteither original old Ford or some aftermarket steel rims. These are thebaby moon style that snap onto the 1940-48 Ford car and 1940-56 Fordtruck rims. Lots of styles. 1950 MERC cap will fit the 1949-51 Mercuryrims.40 DELUXE VIN-01A-1130-SS 25.99 EA40 STANDARD VIN-01C-1130-SS 25.99 EA“SMOOTHIES” VIN-01AS-1130-SS 25.99 EA41 CAR 41-42 PU VIN-11A-1130-SS 25.99 EA42 CAR 46 PU VIN-21A-1130-SS 25.99 EA46 CAR VIN-51A-1130-SS 25.99 EA47-48 CAR 47-56 PU VIN-6A-1130-SS 25.99 EA50 MERC VIN-0M-1130-SS 31.99 EA
STAINLESS STEEL TRIM RINGSVintique’s trim rings snap into the original and aftermarket rims. Madeto look just like the original.15 INCH RIM (a) VIN-6A-18303-15 26.99 EA16 INCH RIM (a) VIN-6A-18303-16 26.99 EA
STAINLESS STEEL TRIM RINGSStainless trim rings by Bob Drake for original or aftermarket stylewheels.14 INCH (a) BOB-6A-18303-14 26.99 EA14 INCH RIBBED (b) BOB-01A-18303-14 27.99 EA15 INCH RIBBED (b) BOB-01A-18303-15 27.99 EA16 INCH RIBBED (b) BOB-01A-18303-16 27.99 EA49-51 FORD STYLE (c) BOB-8A-18303-15 27.99 EA
15 INCH MOON WHEEL DISCSMooneye’s own screw-on aluminum full disc wheel covers. These arefor 15 inch rims. They include the screws that attach them to your rims.15 INCH DISCS MOO-MD1151 42.99 EA
50’S STYLE HUB CAPSNice 50’s style flipper and fiesta full wheel covers for nostalgia hot rods.These listed are a set of four for 15 inch rims. Other sizes are available.FLIPPER CAPS PAC-BHC02-15 74.99 SETFIESTA CAPS PAC-SHC01-15 89.99 SET
SNAP-ON “MOON” DISCSSet of 4 snap-on 15 inch full-cover stainless steel discs. Dress up stockrims and give it that dry lakes or salt flats look.“MOON” DISCS PAC-H-RDC-01-15 59.99 SET
a
b
c
This is a small representation of the partsand suppliers we carry.
We have many more items in our store andcan also special order.
If it’s not listed in the catalog give us a call!800-732-0076
4
Vintage Ford & Chevrolet Parts of Arizonawww.so-calspeedshopAZ.com
TORQ THRUST IIBeautiful American Racing five spoke polished aluminum wheels thatmake any ride look like a classic hot rod. We can get these in a numberof different sizes and offsets, so please call for more info.TORQ THRUST II STARTING AT 195.00 EA
TORQ THRUST DSame five spoke look as the Torq Thrust II, but they have an unpolishedgray center, and a machined finished outer rim.TORQ THRUST D STARTING AT 185.00 EA
CHROME SMOOTHIESIf you like that original style wheel, but want chrome, these AmericanRacing wheels are the way to go. Solid chrome wheel with a smoothchrome center cap. Ford and other logo caps are available for anadditional charge.CHROME SMOOTHIE STARTING AT 85.00 EA
DRUMS, HUBS & BEARINGS
BRAKE DRUMSNew cast brake drums for early Ford hydraulic brake systems. These arethe big 5 on 5 1/2 bolt pattern. There are two styles of drums for the 40-48 passenger car, one has the hub mounted outside of the drum the otherhas it mounted inside. These are for the inside hub only.40-48 INSIDE HUB SAC-5199-3 129.99 EAFRONT HUB STUDS SAC-5073-1 3.99 EAREAR HUB STUDS SAC-5073-2 4.50 EA
FRONT HUB DUST CAPSCaps that keep the dust out of the wheel bearings. Great for stock carsand hot rods with hydraulic brakes.42-48 FORD HUBS LIT-51A-1139 5.99 EA
FRONT WHEEL BEARINGS AND RACESBearings and races for the front hubs of the 1928-48 Ford cars.INNER BEARING MAC-B-1201-T 17.99 EAINNER RACE MAC-B-1202-T 11.99 EAOUTER BEARING MAC-B-1216-T 17.99 EAOUTER RACE MAC-B-1217-T 9.99 EA
FRONT GREASE SEALSeal for front hub, used to keep the grease off the drums.1935-48 FORD MAC-48-1190 7.99 EA
REAR WHEEL BEARINGBig roller bearing in the rear drum.1937-48 FORD MAC-68-1225 29.99 EA
REAR WHEEL SEALGrease seal for the rear wheel bearing.1937-48 FORD MAC-78-1175 6.99 EA
BRAKES & PARTS
MASTER CYLINDERBrand new (not rebuilt) master cylinder for the 39-48 Ford passengercars and 48-52 Ford trucks. USA Made.39-48/48-52 CYLINDER LIT-91A-2140 96.99 EA
BRAKE MASTER CYLINDER REBUILD KITComplete kit for rebuilding the original Ford master cylinder.1939-48 FORD EV8-91A-2004 19.99 EA
MASTER CYLINDER BOLT & BRAKE LINE OUTLETBrass bolt and outlet junction for the back of the master cylinder. Bolt ishollow and threaded internally for the brake light switch. Outlet is heldon by the bolt and has the front and rear brake line ports.39-48 OUTLET MAC-91A-2076 8.99 EA39-48 BOLT MAC-91A-2077 8.99 EA
MASTER CYLINDER FLOOR COVERMetal reinforced rubber plug that fits into the floor for access to themaster cylinder.1939-48 FORD MAC-91A-7011136 8.99 EA
BRAKE HOSES (a)Rubber hoses for the stock brake system on the 39-48 Ford passengercars.39-48 FRONT 2 REQ LIT-99A-2079 14.99 EA39-48 REAR 1 REQ LIT-91A-2078 12.99 EA
LONG FRONT BRAKE HOSES (b)These hoses are great if your using 39-48 Ford brakes on an earlypinched nose frame hot rod. Longer for steering and suspensionclearance.LONG BRAKE HOSES PRK-3948-HOTROD 24.99 PR
WHEEL CYLINDERSNew wheel cylinders for the early Ford backing plates. These cylinderswill work on 39-48 Ford backing plates.42-48 LH FRONT (a) EV8-21A-2062 53.99 EA42-48 RH FRONT (a) EV8-21A-2061 53.99 EA42-48 LH REAR (b) EV8-91A-2261 51.99 EA42-48 RH REAR (b) EV8-91A-2262 51.99 EA
WHEEL CYLINDER REBUILD KITSRubber cups, boots and springs for rebuilding the wheel cylinders.39-41 FRONT (c) LIT-91A-2221 8.99 KIT42-48 FRONT (c) EV8-21A-2221 8.99 KIT42-48 REAR (d) EV8-21A-2128 8.99 KIT
POWER BRAKE PEDAL BRACKETSBrake booster and master cylinder mounting bracket assembly for theearly Ford frames. Includes mounting bracket and pedal. 28-32 kit isuniversal and will fit many applications. Boosters and Master Cylindersare not included here, but are available as listed below.1928-32 FORD TCI-602-6511-00 179.99 KIT1933-34 FORD TCI-603-6511-00 219.99 KIT1935-40 FORD TCI-604-6511-00 219.99 KIT1942-48 FORD TCI-606-6511-00 219.99 KIT
BRAKE BOOSTER MASTER CYLINDER COMBOPower booster with master cylinder for the above listed brackets.(Master Cylinder included is the one listed below) Available in plainfinish or shiny chrome. Great combo for updating your existing system.Dual Diaphragm boosters adds extra security while boosting presure.7 INCH TUF-2121NB 189.99 KIT7 INCH CHROME TUF-2121NA 299.99 KIT7 INCH DUAL TUF-2122NB 209.99 KIT7 INCH DUAL CHROME TUF-2122NA 339.99 KIT8 INCH DUAL TUF-2123NB 209.99 KIT8 INCH DUAL CHROME TUF-2123NA 339.99 KIT
DUAL RESERVOIR MASTER CYLINDERCorvette style master cylinder used on most aftermarket power brakebooster kits. This features a 1 inch bore and has brake line outlets oneither side of the master cylinder. Lets you exit the brake lines towardthe frame or toward the tranny. Will work with 4 wheel disc or drum ora disc/drum combo using the correct residual valves we have listed.PLAIN TUF-2020-NB 79.99 EACHROME TUF-2020-NA 149.99 EA
BRAKE BOOSTERGreat for replacing a worn out aftermarket booster or upgrading yourexisting system. Single or dual diaphragm. Plain finish or chrome.7 INCH TUF-2221-NB 109.99 EA7 INCH CHROME TUF-2221-NA 179.99 EA7 INCH DUAL TUF-2222-NB 150.00 EA7 INCH DUAL CHROME TUF-2222-NA 199.99 EA8 INCH DUAL TUF-2223-NB 149.99 EA8 INCH DUAL CHROME TUF-2223-NA 209.99 EA
MUSTANG II BRAKE KITThese kits offer brackets that bolt the 11 inch rotors to the stockMustang II spindles. They are available as either just a bracket kit orcomplete with brackets, hardware, seals, rotors, and calipers.BRACKETS ONLY MAG-4440 135.99 PRCOMPLETE KIT MAG-4440-CR 399.99 KIT
DISC BRAKE KITSMagnum Axle’s Econo front disc brake kits have been designed to adapt‘77 and earlier GM hub and rotor assemblies or Mopar hub and rotorassemblies to ‘37-’48 Ford spindles without spindle modifications orspecial steering arms. Kits are designed to accept ‘78-up GM intermedi-ate calipers and include bearing adapters, caliper mounting brackets,bearings, seals, all hardware, and instructions. Complete kits alsoinclude calipers and rotors. Mopar kits are Ford and Mopar 5 on 4 1/2bolt pattern, GM kits are 5 on 4 3/4. Bracket kit only shown in picture.MOPAR BRACKET KIT MAG-4450 159.99 KITMOPAR COMPLETE KIT MAG-4450-CR 459.99 KITGM BRACKET KIT MAG-4475 169.99 KITGM COMPLETE KIT MAG-4475-CR 437.99 KIT
BRAIDED STAINLESS BRAKE HOSESThese hose kits fit the GM disc brake calipers and come complete withhoses, fittings, mounting tabs, and clips. Be sure to know what yearyour calipers are.1977 AND OLDER MAG-4777 74.99 KIT1978 AND NEWER MAG-4778 74.99 KIT
BRAKE LINE KITS & TUBINGThis kit comes complete with 30 ft of tubing, 18 line fittings, 2 pipeelbows, 2 pipe tees, 2 master cylinder fittings, 5 valve fittings, 4 adaptertabs, 4 brake line to flex hose adapters, 4 hose nuts, spring wrap and lineclamps. This set is designed for a 45 degree double flare. Extra 6ft SStubing available. Call for info on other available kits.SS BRAKELINE KIT INL-SLS-01 169.99 KITTIN COATED KIT INL-SLS-02 99.99 KIT3/16 SS TUBING INL-CS-3/16 22.99 EA1/4 SS TUBING INL-CS-1/4 22.99 EA5/16 SS TUBING INL-CS-5/16 22.99 EA3/8 SS TUBING INL-CS-3/8 22.99 EA
LOW PRESSURE BRAKE LIGHT SWITCHThe stock brake switch doesn’t activate until 70-80psi, this one comeson at 20-30psi. Brake lights come on quicker so your noticed better.BRAKE SWITCH PAR-PPP-80174 15.99 EA
6
Vintage Ford & Chevrolet Parts of Arizonawww.so-calspeedshopAZ.com
BRAKE VALVESAdjustable proportioning valve, 10 lb residual, and 2 lb residual valve foryour brake system. When your using an aftermarket master cylinder inyour rod, you need valves to keep the brake fluid flowing correctly. The2 lb valve is for disc brakes, the 10 lb is for drum, and the proportioningvalve sets your front to rear pressure balance. If you’re using disc brakesfront and rear, you’ll need two 2 lb valves. (pictured page 5)ADJ PROPORTIONING SOC-024-260-2220 55.99 EA2 LB RESIDUAL SOC-024-260-3278 25.50 EA10 LB RESIDUAL SOC-024-260-3279 25.50 EA
THRU FRAME BRAKE LINE FITTINGSStainless fittings made to pass through a boxed frame (2” or 2 1/4” framewidth) with #3 male on one side and 1/8”npt female on the other.Connects hard lines to rubber or flexible stainless brake hoses.2” FITTINGS PET-1121 46.67 PR2 1/4” FITTINGS PET-1121-1 46.67 PR
EMERGENCY BRAKE PARTS
EMERGENCY BRAKE HANDLESChrome handle with ratchet for easy installation of emergency brakes inyour hot rod. Three styles are available, either under-the-dash mount,floor mount, or shifter mount. The under-the-dash mount is universalwith various mounting capabilities, the floor mount has a 4-pointmounting system for floor or side mounting, and the shifter mountattaches to the Lokar trans mount shifter. Please call for different pedaloptions on the under-dash-mount, and more info on these handles. Underdash mount not pictured.UNDER-DASH-MOUNT STARTING AT 209.99 EAFLOOR MOUNT (a) STARTING AT 109.99 EATRANSMOUNT (b) STARTING AT 136.99 EA
E-BRAKE HANDLE BOOTSBlack naugahyde boot for the floor or transmount e-brake handles.These have chrome rings at the floor and a sewn neck around the handle.TRANSMOUNT LOK-70-EHBT 26.99 EAFLOORMOUNT LOK-70-EHBF 26.99 EA
EMERGENCY BRAKE CABLESThere is a wide variety of cables for stock or aftermarket e-brake handles.The front connector cables are made for specific applications, the rearcables are universal and run individually into the rear drum or disc brakes.These are cut to length. Disc brake systems require some extra attach-ment pieces. Please call for info and prices.FRONT CABLE KIT STARTING AT 72.99 KITREAR CABLE KIT STARTING AT 125.99 KIT
GAS & BRAKE PEDALS
THROTTLE PEDALSThere are many different styles of pedals available for the hot rods.These are just a few we have in our inventory. XL series are a largerpedal. If you don’t see what your looking for or need more info, pleasecall.CHROME SPOON LOK-SPO-6070 55.99 EAFLOOR MOUNT ALUMINUM LOK-FMG-6097 132.99 EAFLOOR MOUNT W/RUBBER LOK-FMG-6098 132.99 EACHROME W/RUBBER LOK-SG-6007 89.99 EAXL CHROME W/RUBBER LOK-SG-6016 95.99 EA
BRAKE AND CLUTCH PEDAL PADSAgain many different styles are available. These are just a few. If youdon’t see what interests you, give us a call.ROUND CHROME/RUBBER LOK-SP0-6071 38.99 EA3 X 2 ALUMN W/RUBBER LOK-BAG-6005 39.99 EA3 3/4 X 2 3/4 ALUMN/RUBBER LOK-BFG-6013 42.99 EA
THROTTLE PEDAL AND LINKAGESpoon style accelerator pedal made by Pete & Jakes to simulate the earlyFord pedal. This has a wide spread mount with bronze bushings forlonger life. Throttle cable designed for straight shot from firewall tocarb.THROTTLE PEDAL PET-8036 89.99 EATHROTTLE CABLE PET-8037 59.99 EA
BRAKE PEDAL ARMSNew pedals with the correct leverage for early Fords. Works with Pete& Jakes master cylinder mounts and accepts the stock brake pedal pad.28-31 PEDAL PET-2009 76.99 EA32 PEDAL PET-3009 76.99 EA
BRAKE AND CLUTCH PEDAL PADSRubber pedal pads with the 1/2 tapered threaded shaft. These are theoriginal style and will fit original or Pete & Jake’s pedal arms.1933-36 (b) DEN-40-2454 13.99 PR1937-40 DEN-78-2454 13.99 PR1941-48 (a) DEN-11A-2454-A 6.99 EA
SO-CAL BRAKE PADSTwo more brake pad designs from SO-CAL to work with the originalPete & Jake brake arms. (Pictured on previous lower page)ART DECO PAD (c) SOC-71500 19.99 EACOMPETITION PAD (d) SOC-71502 24.95 EA
THROTTLE & KICK DOWN CABLES
THROTTLE CABLESLokar’s cut-to-length throttle cables will adapt to factory and aftermarketpedals and carbs. These come in 24 or 36 inch length with a braidedstainless steel or black outer housing with stainless inner cable. Includesaluminum fittings and instructions. You’ll need Lokar’s throttle cablemount kit to attach these to your carburetor. Be sure to check yourmeasurements, we can get these in custom lengths if needed. If youdon’t see your application listed, please call. Tune port, fuel injection,and blown cars need different cables, please call.24 INCH STAINLESS LOK-TC-1000-HT 46.99 EA24 INCH BLACK LOK-TC-1000-U 39.99 EA36 INCH STAINLESS LOK-TC-1000-HT36 54.99 EA36 INCH BLACK LOK-TC-1000-U36 44.99 EA
THROTTLE CABLE CARB MOUNTING KITChrome bracket that mounts to the carburetor and holds the throttlecable and kick down cable in place. Kit includes the bracket and throttlereturn springs. Others available, please call.CARB BRACKET LOK-SRK-4000 25.99 KIT
KICK DOWN CABLESCut-to-length braided stainless kick down cables for an assortment oftransmissions. This cable connects the kick down lever in the tranny tothe accelerator linkage on the carburetor. All kits include aluminumfittings with ferrules to eliminate frayed cables. These are also availablein the black housing. If you don’t see yours listed, please call.TURBO 350 LOK-KD-2350-HT 71.99 EA700R4 LOK-KD-2700-HT 71.99 EAFORD C4 LOK-KD-20C4-HT 71.99 EAFORD AOD LOK-KD-2AOD-HT 71.99 EA
STEERING BOXES & CHASSIS PARTS
VEGA STEERING BOXThis “all new” steering box is designed specifically for hot rod use. It isstronger than stock, with better than OEM castings and internal parts.Uses needle bearing design for smooth steering.VEGA BOX FLA-FR-1500 399.99 EACHROME VEGA BOX FLA-FR-1500-C 669.99 EA
CHEVROLET STEERING BOXNew Chevy steering boxes. Use the 525 Box for 35-48 Fords.GM 525 BOX MUL-920010 309.20 EA
VEGA PITMAN ARMArm that attaches to the steering box and connects it to the drag link.PAINTABLE SOC-60203 81.99 EAPOLISHED STAINLESS SOC-60201 90.99 EAPOLISHED MOUNT NUT SOC-60202 25.99EA
UNISTEER RACK AND PINION STEERINGInnovative new Cross Steer Rack & Pinion, for use on solid axle 1928-1934 Ford cars and trucks. Improves handling and reduces steering effort.Bolts to vega mount or adapts to an original frame. Includes drag linkand steering connections. Please call for more info.UNISTEER UNI-8000470-01 399.99 KIT
MUSTANG PITMAN ARMArm that attaches to the Mustang steering box and connects it to the draglink. This is for the 1 1/8” sector.PAINTABLE TCI-300-3024-00 69.99 EAPOLISHED STAINLESS TCI-300-3024-02 79.99 EA
CHROME UPPER STEERING ARMSingle hole steering arm for Mustang or early Ford steering. Mounts to1937-48 Ford spindles. Hole is tapered 50/50 for a Ford tie rod end.STEERING ARM PET-1017C 85.99 EA
VEGA STEERING BOX BRACKETWeld-on bracket for the 1928-34 Fords. Mounts Vega box to the frame. .1928-34 PET-1019 49.99 EA
TIE RODS WITH ENDSTie rods include the right and left hand tie rod ends with dust boots,cotter pins, and grease fittings. Be sure to know what width axle you
Continued...
8
Vintage Ford & Chevrolet Parts of Arizonawww.so-calspeedshopAZ.com
have before ordering. Plain steel and stainless steel rods are alsoavailable.CHROME FOR 46” AXLE MAG-2950-C 140.00 KITCHROME FOR 47” AXLE TCI-300-3306-01 139.99 KITCHROME FOR 48” AXLE MAG-2951-C 131.99 KIT
DRAG LINKS WITH ENDSDrag links include the right and left hand tie rod ends with dust boots,cotter pins, and grease fittings. Be sure to know what width axle youhave before ordering. Plain steel and stainless steel rods are alsoavailable.CHROME FOR 46” AXLE MAG-2952-C 127.99 KITCHROME FOR 47” AXLE TCI-300-3348-01 141.99 KITCHROME FOR 48” AXLE MAG-2953-C 127.99 KIT
TIE ROD AND DRAG LINK ENDSNew tie rod ends include the rubber boot, grease fitting, and cotter pin.Watch for RH and LH thread.RIGHT TIE ROD EV8-11A-3270 18.99 EALEFT TIE ROD EV8-11A-3271 18.99 EA
CHROME TIE ROD ENDSRight and left hand chrome tie rod and drag link ends with rubber dustboots, grease fittings, castle nuts, and cotter pins.RIGHT HAND TCI-300-3302-01 53.99 EALEFT HAND TCI-300-3303-01 53.99 EA
POLISHED STAINLESS STEEL TIE ROD ENDSPolished stainless steel tie rod ends will fit the 28-48 tie rods and draglinks. They are self lubricating, and include the rubber dust boot,stainless nut, and cotter pin.LEFT HAND SOC-60505 55.00 EARIGHT HAND SOC-60506 55.00 EA
TIE ROD END RUBBER BOOTSRubber dust caps that fit over the studs of the tie rods.32-48 DEN-48-3332 6.99 EA
LOWER STEERING ARMS FOR DROPPED AXLESThese are the arms that bolt to the spindles and attach the tie rod anddrag link. These listed are for 28-34 Fords with a Vega steering box andradius rods or 4-bar front suspension. Others are available, please callfor info.PLAIN STEEL MAG-2760 95.99 PRCHROMED STEEL MAG-2760-C 149.99 PRSTAINLESS STEEL MAG-2760-S 175.00 PR
DROPPED STEERING ARMSThese are the arms used when installing a dropped axle in a 1933-1948.These drop the mounting point of the tie rod and drag link so they clearyour 4-bar or radius rod suspension. (pictured top of next column)STANDARD CHA-AR-2121-S 88.99 PR
STEERING DAMPERIf your car’s alignment is correct or a little out and you have a littleshimmy or you don’t, you could use one of these dampers. This acts as ashock on your tie rod and tightens up the steering. Clamps around thetie rod or drag link and over to either a four bar or radius rod bar. If yourusing wishbones, you’ll have to make a clamp to go around it or the axle.BLACK DAMPER SOC-60770 35.99 EACHROME DAMPER SOC-60771 69.99 EA
BILL’S BRACKETS POWER STEERING BRACKETSMore cool brackets made by Bill’s Hot Rod. These brackets mount tothe two lower left front bolt holes located by the timing cover and mountthe early style GM pump with integral reservoir. Small block brackethas two mounting positions (high & low) Big block has three (high,medium, & low). Both fit either short or long water pumps.SBC PLAIN BIL-301 74.99 EASBC BLACK BIL-302 87.99 EASBC CHROME BIL-303 119.99 EABBC PLAIN BIL-501 89.99 EABBC BLACK BIL-502 99.99 EABBC CHROME BIL-503 131.99 EA
POWER STEERING COMPONENTSZoops also manufactures their “Correct-Align” brackets for the GMpower steering pumps, either early style with integral reservoir, or type IIpump with remote reservoir. Give a call for applications and prices.PUMP BRACKETS STARTING AT 149.99 EAPOWER STEERING PULLEY STARTING AT 85.99 EAREMOTE RESERVOIR ZOO-6180 149.99 EA
POWER STEERING HOSES (STAINLESS)Braided stainless hoses for the power steering fluid. These connect theearly or late pump to either the box or rack, and include everything to doit. Also available is a hose to connect the Type 2 pump to a remotereservoir.GM PUMP TO FORD RACK GOT-131101 149.99 KITGM PUMP TO 605 GM BOX GOT-131151 149.99 KITTYPE 2 PUMP TO REMOTE RES GOT-131102 65.99 KIT
MUSTANG II MANUAL RACK AND PINIONAll new Flaming River manufactured part. This rack measures 45”overall, is 4.00 turns lock to lock, and has a travel of 5.25”. Aluminumcast with chrome plated steel center tube for strength.MANUAL RACK WYS-WP-3940C 169.99 EARACK MOUNT BUSHINGS FLA-FR-1600 13.99 EATIE ROD ENDS FLA-FR-1601 21.99 EA
UNIVERSAL JOINTSThese are the u-joints that are used to connect the steering column to thegear box. We have a number of different combinations that fit manydifferent columns and boxes. Below are a few of the popular ones, callif you don’t see what you need. Also available in stainless steel andpolished stainless steel. Double u-joints and vibration damper u-jointsare also available.3/4” SMOOTH x 3/4” 36 BOR-013464 70.04 EA9/16” 26 x 3/4” DD BOR-014909 73.99 EA3/4” 36 x 3/4” 36 BOR-013434 73.99 EA1” 48 x 3/4” DD BOR-014349 73.99 EA1” DD x 3/4” DD BOR-014952 73.99 EA3/4” 36 x 3/4” DD BOR-013449 73.99 EA3/4” DD x 3/4” DD BOR-014949 73.99 EA1” DD x 3/4” DD BOR-014952 73.99 EA13/16” 36 x 3/4” DD BOR-014940 73.99 EA5/8” 36 x 3/4” DD BOR-014918 73.99 EA5/8” 36 x 3/4” 36 BOR-013418 73.99 EA3/4” 30 X 3/4 DD BOR-014931 73.99 EA
U-JOINT INTERMEDIATE SHAFTSThere are two types of shafts available. One is 3/4” diameter and is cutboth ends with 36 spline. It is available in a number of lengths in twoinch increments. The other is 3/4” diameter double D (DD). You can cutit to any length you need. These are constructed using pre-ground alloysteel for strength and cosmetics. Again just a few of the popular ones arelisted, but many are available.18” DD SHAFT BOR-409418 18.99 EA36” DD SHAFT BOR-409436 24.99 EA3/4” 36 SPLINED 8” SHAFT BOR-409208 32.95 EA3/4” 36 SPLINED 10” SHAFT BOR-409210 32.95 EA3/4” 36 SPLINED 12” SHAFT BOR-409212 32.95 EA
FLAMING RIVER SUPPORT BEARINGSupport is used when you have more than 2 u-joints in your system.This keeps the shaft from wanting to bounce around. It can be used witheither DD or 3/4” splined shaftsPLAIN BOR-700000 30.99 EA
BORGESON SUPPORT BEARINGSupport is used when you have more than 2 u-joints in your system.This keeps the shaft from wanting to bounce around. It can be used witheither DD or 3/4” splined shaftsPLAIN BOR-650000 42.35 EAPOLISHED BOR-660000 58.99 EA
STEERING COLUMNS & RELATED
FLAMING RIVER STEERING COLUMNSThere are many styles of columns available for hot rod use. These are afew that Flaming River manufacturers. These are constructed using allnew components with all new GM turn signal switches and wiring. Theyare available with or without tilt, with or without column shift, in steel,polished stainless steel, aluminum, and chrome plated finishes. Mostcolumns are available 28”, 30”, 32”, or 35” long, be sure to give us ameasurement on yours. Just a few of the popular ones are listed, but giveus a call if we can help you choose one for your ride. Tilt columns canbe ordered in 1 3/4” or 2” diameter, tilt with shift are 2”.ROADSTER COLUMN STARTING AT 329.99 EASTEEL WITH TILT STARTING AT 359.99 EAPOLISHED SS WITH TILT STARTING AT 529.99 EASTEEL W/TILT AND SHIFT STARTING AT 529.99 EACHROME W/TILT AND SHIF STARTING AT 629.99 EA
MULLIN’S ALUMINUM STEERING COLUMNThis is a straight non-shift/ non-tilt column, perfect for early hot rodapplications. These are made of aluminum and are available in ma-chined or polished finish. These columns are offered in different lengths26, 30, or 34 inches long. Three bolt steering wheels will bolt right on.26” MACHINED MUL-908001 232.67 EA26” POLISHED MUL-908002 268.87 EA30” MACHINED MUL-908003 232.67 EA30” POLISHED MUL-908004 268.87 EA34” MACHINED MUL-908005 232.67 EA34” POLISHED MUL-908006 268.87 EA
IDIDIT STEERING COLUMNSThese columns are available in a variety of combinations. Just a few arelisted here. Please call and we can help you choose what’s best for yourcar or truck. Columns include the GM turn signal switch with wiring andall levers and knobs. Aluminum columns are available brushed orpolished.STEEL COLUMN NON SHIFT OR TILT 274.99 EACHROME COLUMN NON SHIFT OR TILT 369.99 EAALUMINUM COLUMN NON SHIFT OR TILT 439.99 EASTEEL COLUMN WITH TILT NON SHIFT 329.99 EACHROME COLUMN WITH TILT NON SHIFT 439.99 EAALUMINUM COLUMN WITH TILT NON SHIFT 619.99 EASTEEL COLUMN WITH TILT AND SHIFT 519.99 EACHROME COLUMN WITH TILT AND SHIFT 629.99 EAALUMINUM COLUMN WITH TILT AND SHIFT 989.99 EA
(Pictured on next page)
10
Vintage Ford & Chevrolet Parts of Arizonawww.so-calspeedshopAZ.com
55-57 CHEVY TILT STEERING COLUMN FOR FLOOR SHIFTFeatures 2” tube for direct bolt-in fit with your existing dash bezel. Allnew components for updated steering. Complete with Stainless DressUp kit (tilt/turn signal levers, hazard knob), GM wiring and cancelingcam. Shaft size is 1 in. DD. Available steel or polished stainless.55-56 PLAIN FLA-FR-20005 359.99 EA55-56 STAINLESS FLA-FR-20005-SS 479.99 EA57 PLAIN FLA-FR-20005-57 499.99 EA57 STAINLESS FLA-FR-20005-57SS 749.99 EA
55-57 CHEVY TILT COLUMN WITH COLUMN SHIFTAll new column fits the dash bezel like the original... with the addedbenefit of TILT. Stainless Steel Dress Up kit (tilt/turn signal levers andhazard knob), GM wiring (4-1/4 in. connector) and all new cancelingcam. Shaft size is 1 in. DD. Combination Back up and Neutral SafetySwitch Included. Available plain steel or polished stainless steel.55-56 PLAIN FLA-FR-20023 609.99 EA55-56 STAINLESS FLA-FR-20023-SS 699.99 EA57 PLAIN FLA-FR-20023-57 659.99 EA57 STAINLESS FLA-FR-20023-57SS 749.99
67-72 GM TRUCK TILT STEERING COLUMNAftermarket, bolt-in GM tilt column with or with out a column shift.Made to fit your truck and to use stock wiring. Call for more informationon ordering for your late model truck.STEEL W/O SHIFT IDI-1120657010 369.99 EACHROME W/O SHIFT IDI-1120657020 479.99 EASTEEL W/SHIFT IDI-1140657010 569.99 EACHROME W/SHIFT IDI-1140657020 759.99 EAALUMN W/O SHIFT IDI-11070657030 725.99 EAPOL. ALUMN W/O SHIFT IDI-1070657040 725.99 EAALUMN W/SHIFT IDI-1150657030 1,109.99 EAPOL. ALUMN W/SHIFT IDI-1150657040 1,109.99 E
COLUMN DROPS AND FLOOR MOUNTSMullins drops and mounts can be ordered a number of different ways.We have them for 1 3/4” and 2” diameter columns, solid or split designfloor mounts, with or without swivel. Column drops are 2 1/2” , 3 1/2”,4 1/2”, 5 1/2”, and 6 1/2”. They measure this from the bottom of thedash to the center of the column. We have these in satin or polishedfinish.
COLUMN DROPS STARTING AT 59.99 EAFLOOR MOUNTS STARTING AT 55.99 EA
STEERING COLUMN DROPSThere is a wide variety of drops made from 2” to 7” down from the dashto the center of the column, and for 1 3/4” to 2 3/8” diameter columns.Mullins offers these either solid or with a window. Mounts are availablemachined or polished finish. Please call for sizes and applications.MACHINED COLUMN DROP STARTING AT 65.99 EAPOLISHED COLUMN DROP STARTING AT 88.99 EA
STEERING COLUMN FLOOR MOUNTSMullin’s offers a few varieties of floor mounts for the aftermarketcolumns. These also are available in machined or polished finish, with asolid full circle design for non-shift columns or split type to be mountedaround any column.MACHINED MOUNTS STARTING AT 59.88 EAPOLISHED MOUNTS STARTING AT 64.88 EA
STEERING COLUMN TO FLOOR MOUNTS & KITSIdidit’s simple steel clamp similar to an exhaust clamp with 90 degreebrackets that bolt down to the floor and hold the column in place. Besure to measure the diameter of your column. Available as just a mountor kit. Kits include the mount, chrome ring, dress-up boots are extra.Lets us know what color you want. Black, tan, or gray.1 3/4” MOUNT IDI-2400300010 27.99 EA2” MOUNT IDI-2401300010 27.99 EA2 1/4” MOUNT IDI-2402300010 27.99 EA1 3/4” MOUNT KIT IDI-14086 52.99 EA2” MOUNT KIT IDI-14186 52.99 EA2 1/4” MOUNT KIT IDI-14286 52.99 EADRESS UP BOOT CALL FOR COLORS 13.99 EA
TURN SIGNAL SWITCH AND COLUMN MOUNTLimework’s own turn signal switch and combination switch and columnmount. Nice polished aluminum parts to dress-up any column. Will fit1 1/2” and 1 3/4” columns.TURN SIGNAL SWITCH VIN-LW-TSSSWITCH AND MOUNT VIN-LW-TSSCM
AUTOMATIC SHIFT COLUMN DIAL & POINTERSelf adhesive clear plastic dial and pointer with red lettering. Mounts tothe top of the column and points to which gear you are in.3 SPEED AUTOMATIC IDI-260000010 25.50 EA4 SPEED AUTOMATIC IDI-2600050010 25.99 EA
CABLE SHIFT LINKAGEUniversal cable system that connects the shifter on the column to thetransmission. Comes as a complete kit including cable, brackets, andhardware.GM TRANSMISSION IDI-2801000010 128.99 KITC-4 TRANSMISSION IDI-2801300010 157.50 KITC-6 TRANSMISSION IDI-2801400010 157.50 KITAOD TRANSMISSION IDI-2801500010 197.16 KIT727 TRANSMISSION IDI-2801700010 173.83 KIT904 TRANSMISSION IDI-2801700010 173.83 KIT
STEERING WHEELS & PARTS
1939 BANJO STEERING WHEELReproduction of the 1939 Ford Banjo steering wheel. This is made justlike the original. Will fit early Ford keyed columns.1939 BANJO WHEEL MAC-91A-3600-B 209.99 EASTEERING WHEEL NUT MAC-B-3610 .79 EA
LECARRA STEERING WHEELSLecarra has a lot of different steering wheels with different diameters andcolors. Here are a few different ones that we carry. Please call or stop into look at the catalog or call for more info. Banjo shown to the right.MARK 10 GLOSSY BLK LEC-71000 269.99 EAMARK 10 PRIMED LEC-72000 199.99 EAHORN RING FOR MARK 10 LEC-3710 199.99 EABLACK BANJO WHEEL LEC-55201 459.99 EAWOOD BANJO WHEEL LEC-55322NEWSTALGIC BANJO LEC-55301 449.99 EA
STEERING WHEEL ADAPTERSThese fit the Lecarra and other nine bolt steering wheels. Please call ifyou have questions or don’t see one for you listed.GM POLISHED (A) LEC-64200 59.99 EASTD BLACK (B) LEC-16400 74.99 EAMACHINED BILLET (D) LEC-16499 75.99 EA
LECARRA HORN BUTTONSThese fit the Lecarra steering wheels. Please call if you need more info.FULL COVER ALUMN (E) LEC-3223 63.99 EAV8 ALUMINUM (F) LEC-3455 79.99 EASTANDARD BLACK (G) LEC-3101 12.99 EAGROOVY BUTTON (H) LEC-3722 59.99 EASTD ALUMN BUTTON (I) LEC-3301 32.99 EA
LOBECK’S HOT ROD STEERING WHEELSLobeck’s 3 Spoke, fully wrapped, aluminum, 14” steering wheel. Theselight weight wheels use the three bolt Grant style adapter.BLACK V8S-015-1529-BLACK 160.00 EALIGHT GRAY V8S-015-1529-LT-GREY 160.00 EADARK GRAY V8S-015-1529-DK-GREY 160.00 EATAN V8S-015-1529-TAN 160.00 EA
40 FORD STEERING WHEELTwo types available. One stock 17 inch for stock columns and steeringshafts, and one 15 inch that bolts to a GM style or original column.Both wheels include horn buttons. Nice black gloss finish, ready for use.17 INCH STOCK VIN-01A-3600-D 260.00 EA15 INCH HOT ROD VIN-01A-3600-SR 279.99 EA
GRANT STEERING WHEEL ADAPTERThis fits GM columns from 1967-96, with or with out tilt ,with orwithout shift. It adapts the 3 bolt style steering wheels from Grant, So-Cal, Pete & Jakes, Lecarra, and so-on.GRANT ADAPTER PAR-GRANT-3196 29.99 EA
Many styles of wheelsare available.
12
Vintage Ford & Chevrolet Parts of Arizonawww.so-calspeedshopAZ.com
DROP AXLE SUSPENSION PARTS
4 INCH DROP I-BEAM AXLEChassis Engineering’s dropped I-beam axle. This has a 4 inch drop with2 1/4” boss at the spring perch. 47 inches wide from king pin to kingpin. Will accept 37-48 Ford spindles47 IN I-BEAM CHA-AU-2107 249.99 EA
DRILLED I-BEAM AXLESame axle as above with a touch of So-Cal. This axle is polished on bothsides before the holes are milled into it, giving it a true round hole, andmaking it ready for paint or plate. This axle has the 2 1/4” boss.DRILLED AXLE SOC-70501 499.99 EA
MAGNUM AXLE’S I-BEAM AXLESMagnum’s one piece ductile iron I-beam axles have a 4 inch drop and willaccept 37-48 Ford spindles. The axles listed all have the 2 1/4 inch boss,but are available in 2 inch boss. These are plain finish, but chrome isavailable. Please call if you don’t see what you need, or if you havequestions.28-36 48 IN WIDE AXLE MAG-2850 299.99 EA28-34 46 IN WIDE AXLE MAG-2852 299.99 EA37-41 47 3/4 IN WIDE AXLE MAG-2860 350.99 EA
FRONT CROSSMEMBER3/16” steel die stamped crossmember, This fits the 1928-34 Ford frame.It has a 7 degree rake and a built in drop that will lower you car approx.1 inch.FRONT CROSSMEMBER DEU-3250 83.99 EA
TOTAL COST INVOLVED FRONT SPRINGChrome or plain front spring for the 1928-34 Ford crossmember. Theseare made with a reversed eye main-leaf and include spring liner, springclamps, and center bolt. Be sure to know what width axle your using.PLAIN SPRING 46” AXLE MAG-2602 139.99 EACHROME SPRING 46” AXLE MAG-2602C 299.99 EAPLAIN SPRING 48” AXLE MAG-2600 139.99 EACHROME SPRING 48” AXLE MAG-2600-C 329.99 EA
CHASSIS ENGINEERING FRONT SPRINGFront spring for the Chassis’ 47 inch axle. Tapered and rolled leaf endsand hidden sliders make for a nice looking and riding spring.FRONT SPRING CHA-FS-28-34-VT 119.99 EA
POLY-SLIDE SPRING LINERSpecial liner designed for between the leafs of the springs in youroriginal car or hot rod. Liner comes in a 20 foot roll with “lips” on bothsides to hold it in place. Be sure to measure the width of your springs.1 3/4” SPRING VIN-A-5310-P1 10.00 ROLL
2” SPRING VIN-A-5310-P2 12.00 ROLL2 1/4” SPRING VIN-A-5310-P3 12.99 ROLL
FRONT SPRING CLAMPSStainless clamps that hold the leafs of the spring together.1 3/4” SPRING BOB-HR-330 22.99 PR2” SPRING BOB-HR-331 22.99 PR2 1/4” SPRING BOB-HR-332 22.99 PR
SPRING SHACKLESPaintable or polished stainless shackles for connecting the spring perchto the spring. These have the 3/4” bushings on each side. Be sure tomeasure the width of your spring.1 3/4” PAINTABLE BOB-BD-2630 29.99 PR1 3/4” POLISHED SS BOB-BD-2630-S 62.99 PR2” PAINTABLE BOB-BD-2632 29.99 PR2” POLISHED SS BOB-BD-2632-S 62.99 PR2 1/4” PAINTABLE BOB-BD-2634 29.99 EA2 1/4” POLISHED SS BOB-BD-2634-S 62.99 EA
SPRING SHACKLE BUSHINGSBlack urethane bushings with 1/2” inner diameter. These listed fit the3/4” eye on the spring and perch. One bushing is 2 halves and does onlyone eye. Four sets will do one complete spring and perch. Other sizesare available, please call.1 3/4” SPRING WIDTH BOB-BD-2631-BS 16.99 SET2” SPRING WIDTH BOB-BD-2633-BS 16.99 SET2 1/4” SPRING WIDTH BOB-BD-2635-BS 16.99 SET
SELF-ALIGNING STAINLESS STEEL SPRING PERCHESHighly polished stainless perches that adjust to the caster of your axle.SELF-ALIGNING PERCHES SOC-61108 221.99 SET
STAINLESS STEEL SPRING PERCHESPins that pass through the batwings and axle and support the springshackles and lower shock mounts. These are polished stainless steel.SS SPRING PERCH SOC-61101 107.99 PR
SPRING PERCH NUTSSpecial nuts that keep the spring perch in the axle. Check to see if youneed tapered or flat nuts.POLISHED FLAT NUTS MAG-2665-S 8.99 EASTAINLESS TAPERED NUTS MAG-2666 10.99 EAPOLISHED TAPERED NUTS MAG-2666-S 15.99 EA
1928-34 FRONT SPRING PERCHESPins that mount the front suspension to the axle. These perches attachthe batwings to the 2” or 2 1/4” boss front axle and have the 3/4” eye inthem for the 1 3/4” spring shackles.PLAIN PERCHES PET-1042 69.99 PRCHROME PERCHES PET-1042-C 100.00 PR
SO-CAL FRONT SPRING CLAMPEliminate the need for different length u-bolts. This clamp uses a flat-plate design which makes shimming for more or less spring leafs a loteasier. All you need to change are the bolts. Clamp includes analuminum spacer block for mounting the spring.SPRING CLAMP SOC-60400 54.99 KIT
FRONT U-BOLT KITU-bolts and plate that hold the front spring in the crossmember. Kitincludes two u-bolts, lower plate, and nuts.1928-34 PET-1001 46.99 KIT
CHROME FRONT U-BOLT KITMounting plate and u-bolts that hold the front spring in the crossmemberon a 1928-34 Ford. Nuts are included.CHROME U-BOLT PET-1001C 69.99 KIT
1937-41 FORD SPINDLESNew forged steel spindles that are copied from the original Ford 1937-41spindles. Made to accept the stock king pins, bushings, and bearings.These do not have steering arms on them, like the original did. We dooffer these with the brass king pin bushings pressed in and reamed.STEEL SPINDLES MAG-2700 215.99 PRCHROME SPINDLES MAG-2700-C 359.99 PRKING PIN BUSHINGS FITTED MAG-2702-00 59.99 PR
SPINDLE NUTS AND WASHERSSet of castle nuts and flat washers that hold the brake drum to the 37-48Ford spindles. Kit includes 2 nuts and 2 washers.SPINDLE NUT KIT PET-1007 16.99 KIT
KING PIN KITSKits are complete with new pins, bushings, bearings, lock pins, andshims to connect the spindles to the axle.37-41 FORD DEN-78-3111 52.99 EA42-48 FORD DEN-21A-3111 57.99 EA
STAINLESS KING PIN SETSComplete king pin set for the 37-41 Ford spindles. These includepolished stainless topped king pins, polished stainless locking pins andspindle stop nut, chrome bearings, brass bushings, and shims.STAINLESS KING PINS SOC-60701 114.99 KIT
KING PIN LOCKS AND STOP NUTSPolished stainless steel pins that lock the king pins in the axle. Thesealso act as a spindle stop for your turning radius.STAINLESS KING PIN LOCKS SOC-60102 38.99 KIT
SO-CAL RADIUS RODS & BATWING KITSimple and clean hairpins designed with “hot rod” in mind. Thesestainless batwings and chrome radius rods work great with an I-beamaxle. Batwings include built-in lower shock mounts and panhard barmounting tab. Comes complete with instructions and mountinghardware.RADIUS ROD & BATWING KIT SOC-62033 649.99 KITBATWINGS ONLY SOC-60805 249.99 PR
FRONT PANHARD BARIf you’ve got a dropped axle and Vega steering, you need one of these tohelp keep the front end in place. This eliminates lateral axle movementand bump steer with a bar spanning from the frame to the batwing.FRONT PANHARD BAR STARTING AT 95.99 KIT
HOT ROD SHOCKSPlain or chrome finish, front or rear shocks for your hot rod. These haveeyes on both ends. Short shocks measure 7 1/8” closed and 11 1/4”open, long shocks measure 9 1/4” closed and 14 1/4” open. Coveredshocks are the same length as the long ones and are usually used on therear of the car.PLAIN SHORT SHOCKS PET-2084 59.99 PRCHROME SHORT SHOCKS PET-2084-C 99.99 PRPLAIN LONG SHOCKS PET-1084 59.99 PRCHROME LONG SHOCKS PET-1084-C 89.99 PRPLAIN COVERED SHOCKS PET-1086 62.99 PRCHROME COVERED SHOCKS PET-1086-C 98.99 PR
14
Vintage Ford & Chevrolet Parts of Arizonawww.so-calspeedshopAZ.com
SO-CAL F-1 STYLE SHOCK MOUNTS (pictured on pg.13)Made to look like the original Ford F-1 upper shock mounts, thesepolished stainless mounts add a touch of beauty to any front end. Withthese you get: upper rubber shock bushings, weld in chassis bungs, andmounting bolts. They will not work with full fendered cars.F-1 SHOCK MOUNTS SOC-60600 125.99 EA
LOWER SHOCK MOUNTSThese mount under the batwing, to the spring perch, and have a stud forthe shock to mount to.PLAIN SHOCK MOUNT PET-1067 69.99 PRCHROME SHOCK MOUNT PET-1067-C 92.99 PRSTAINLESS SHOCK MOUNT DEU-3218-P 109.99 PR
BOLT-ON FRONT SHOCK KITInstall tube shocks on your old Ford. Kit includes upper brackets, tubeshocks, spring shackles/lower shock mounts, and hardware.1935-40 FORD CHA-AR-2037 169.99 SET
INDEPENDENT FRONT SUSPENSIONKITS & PARTS
COMPLETE MUSTANG II SUSPENSION KITSThese kits are available deluxe or economy style, and can be orderedwith or with out the crossmember. The deluxe kit includes tubular upperand full lower a-arms, the economy kit uses formed steel budget upperand full lower a-arms. These kits also include 9-1/4” five lug rotors,bearings and seals, springs, stock reconditioned spindles, rebuiltmustang calipers with brackets and pads, manual rack and pinion with tierod ends and bushings, rubber spring cushions, spindle nut kit, and allmounting hardware. Please call with make and year of your car or truck.DELUXE KIT WITH CROSSMEMBER 1895.00 KITDELUXE KIT WITHOUT CROSSMEMBER 1495.00 KITECONOMY KIT WITH CROSSMEMBER 1729.00 KITECONOMY KIT WITHOUT CROSSMEMBER 1359.00 KIT
UPGRADES FOR SUSPENSION KITSWant to buildup and dress-up that Mustang II suspension kit, here arethe parts to do it with. These prices are good only when purchased witha complete kit. Polished a-arms are for deluxe kits only.CHROME COIL-OVER SHOCKS & SPRINGS 359.99 PR11” BRAKES WITH POLISHED CALIPERS 259.99 KITPOWER RACK AND PINION 140.00 EA2” DROPPED STEEL SPINDLES N/C
SUPERIDE INDEPENDENT SUSPENSION KITSSuperide, superide II, open wheel superide, and superide II for pick-ups.These kits are totally redesigned from the Mustang II using Heidt’ssuperide one piece spindles, upper and lower tubular a-arms made toclear stock fenders, and designed for specific Ford and Chevy cars andTrucks. Please call for application and prices.SUPERIDE 2,599.99 KITSUPERIDE II 2,599.99 KITOUTBOARD OPENWHEEL SUPERIDE 2,895.00 KITINBOARD OPENWHEEL SUPERIDE 3,295.00 KITPICK-UP SUPERIDE II 2,599.99 KIT
UPGRADES FOR SUPERIDE KITSSome options are available for all Superides some are not. Please call foryour application. These prices are good only when purchased with theabove kit.POLISHED STAINLESS A-ARMS 499.00 KITPOLISHED ALUMINUM HUBS 449.99 PRPOLISHED SHOCK BODIES 85.99 PRSTAINLESS FLEX BRAKE LINES & FITTINGS 49.99 KITSTABILIZER BAR 189.99 KITCHROME STABILIZER BAR 259.99 KITBALL JOINT CAPS 35.99 KITBILLET RACK 399.00 EAPOLISHED STAINLESS STEEL SPINDLE 249.00 PRPOLISHED BRAKE ROTOR COVER 179.99 PRPOLISHED STAINLESS TIE ROD ENDS 85.99 PR
TOTAL COST INVOLVED IFSWe here at So-Cal offer a few different options for the Mustang II styleIFS systems. These listed here come from TCI. They come standardwith 11 inch disc brakes and tubular upper and lower control arms.There are many styles with many options for 1928-48 Ford and Chevypassenger cars and 28-56 Ford and Chevy trucks. Listed are just a fewso please give us a call for more information.35-40 FORD CAR STARTING AT 1,899.99 KIT53-56 FORD TRUCK STARTING AT 1,899.99 KIT55-59 CHEVY TRUCK STARTING AT 1,899.99 KIT
MUSTANG II DISC BRAKE ROTORSAftermarket 5 bolt GM and Ford bolt pattern rotors for the Mustang IISuspension. These are the smaller 9 1/4” rotors. GM bolt pattern is 5on 4 3/4, Ford pattern is 5 on 4 1/2.GM ROTORS PAR-1278 109.99 PRFORD ROTORS PAR-1279 109.99 PRBEARING KITS PAR-1272 21.99 KIT
FRONT & REAR SWAY BARSFront sway bars for the early Fords with Mustang II front suspension.Bars include all hardware and instructions.35-40 FRONT CHA-SB-3540-PM 169.99 KIT41-48 FRONT CHA-SB-4148-PM 169.99 KIT41-48 REAR CHA-SB-4148-R 159.99 KIT
REAR SUSPENSION PARTS
SO-CAL REAR END PACKAGESLooking for a complete, easy-to-use rear suspension package? This is it.Kits include: new straightened Currie smooth-style 9-inch Ford-type HotRod rear end housing complete with all brackets, ladder bars anddropped crossmember, either coil or leaf springs and crossmember, andall hardware. You’ll still need axles and brakes, which we also have.REAR END PACKAGE PLEASE CALL FOR PRICES
TRANSVERSE REAR SPRING MOUNTING KITKit that mounts the transverse rear spring behind a late model rear end.Kits include brackets to put the spring behind the rear end, gussets, andspring shackles with urethane bushings. Be sure to measure the diameterof your axle housings. Also let us know what year your frame is.3” AXLE HOUSING KIT PET-5019 99.99 KIT2 13/16” AXLE HOUSING KIT PET-5019-A 99.99 KIT
MODEL A REAR SPRING MOUNTS (pictured on previous column)Weld-on brackets that attach to the top of the rear axle housing andsupport s 2 1/4” wide rear spring. Includes new spring shackles andbushings.REAR SPRING MOUNTS PET-2019 99.99 KIT
LADDER BAR REAR AXLE BRACKETThese are the brackets that weld around the rear axle housing. The ladderbars bolt up to these. Be sure to measure your axle tubes.3” HOUSING BRACKET PET-3500 59.99 PR2 13/16” HOUSING BRACKET PET-3501 59.99 PR37-48 AXLE HOUSING PET-3502 59.99 PR
LOWER REAR SHOCK MOUNTSBrackets that weld to the rear axle housings and the shocks bolt to.These offer four vertical shock mounting positions for adjusting to theride height.LOWER SHOCK MOUNTS SOC-63202 34.95 PR
COMPLETE REAR END MOUNTING KITThis kit gives you everything you need for installing a parallel rear leafsuspension. Made by Chassis Engineering this kit includes: springs,frame brackets, shocks, shackles, rear end plate, u-bolts, hardware, andinstructions.1936-40 FORD CHA-AS-2016-CF 559.99 SET1941-48 FORD CHA-AS-2017-CF 559.99 SET
WELD-ON SPRING PADSSteel pads that weld to your rear end housing for parallel rear leaf springsuspension. These are the pads that the leaf springs sit on.SPRING PADS CHA-AU-2229 30.99 PR
LOWERING BLOCK KITTwo inch lowering block kit: includes, blocks, u-bolts, hardware, andinstructions.2” LOWERING BLOCKS MIS-735-3941 46.99 EA
16
Vintage Ford & Chevrolet Parts of Arizonawww.so-calspeedshopAZ.com
BATTERY & RELATED
BATTERY STORAGE BOXIt’s plastic and it’s inexpensive, and it works. Simple container that willhouse the battery behind the seat or in the trunk, out of the way.BATTERY BOX SOC-014-56-1701 21.99 EA
BATTERY DISCONNECT SWITCHBattery post mounted and floor or firewall mounted disconnects forkilling the power to your hot rod. Floor mount includes key. Help secureyour car and save your battery’s life with one of these.POST MOUNT (a) VIN-A-14300-C 10.99 EAFLOOR MOUNT (b) VIN-A-14300-D 26.99 EA
CHROME BATTERY BOX/HOLDERPolished aluminum battery tray, box or holder. This is a great piece forplacing the battery under the hood, in the trunk, or where ever. FitsOptimas and other batteries.POLISHED TRAY WYS-WA-9328-C 89.99 EA
FLATHEAD ENGINE PARTS & ACCS.
CHROME ACORN NUT COVERSChrome dress-up acorn covers for hiding ugly bolts and nuts.1/2 COVERS MAC-SR-6060-B .85 EA9/16 COVERS MAC-SR-6060-C .80 EA11/16 COVERS MAC-SR-6060-E .99 EA
OFFENHAUSER FLATHEAD FORD V8 HEADSCast aluminum high compression heads for the Ford Flathead V8Motors. Dress up that flathead, and help it run better and cooler withthese aftermarket heads. Great product with superior workmanship andproven quality.39-48 7:6 RATIO OFF-1068-400 599.99 PR49-53 7:6 RATIO OFF-1069-400 599.99 PR
REAR END HOUSING BREATHER (pictured on prev. page)Polished stainless vent for the Ford nine inch rear ends.BREATHER SOC-62705 18.99 EA
COILOVER SPANNER WRENCHSpecial tool for adjusting coilovers. Nice rubber grip handle.WRENCH DEU-3215-W 23.99 EA
REAR DRUM BRAKE KITEverything you’ll need to replace your old drum brakes, or to complete anew rear end. Includes, backing plates with all new brake springs, shoes,hardware, and brake drums. Please call for more info and measurements.CALL FOR APPLICATION CUR-055-11-2-25B 429.99 KIT
REAR AXLE BUMPERSLow profile universal rubber stop with a steel back. This is a flatbumper, but it can be conformed to “C” notched frames.AXLE BUMPER VIN-B-5783 9.99 EA
FRAME COMPONENTS
BODY MOUNTING KITSRubber mounting pads used between the body and the frame.1935-36 DEN-48-5001 59.99 KIT37-40 FORD CAR BOB-78-5001 29.99 SET41-48 FORD CAR BOB-21A-5001 29.99 SET
FRAME WEBBINGWoven material in a 20 foot roll. Perfect for mounting bodies on theframe to eliminate squeaks. Part #’s ending in “S” have a peel back selfadhesive side for sticking to the frame.1 1/2” WIDE 1/16” THICK VIN-B-5000-A1 16.99 EA1 1/2” WIDE 1/8” THICK VIN-B-5000-B1 22.50 EA2” WIDE 1/8” THICK VIN-B-5000-B2 24.99 EA1 1/2” WIDE 1/8” THICK VIN-B-5000-AS 24.99 EA2” WIDE 1/8” THICK VIN-B-5000-BS 24.99 EA
a
b
This is a small represen-tation of the parts and
suppliers we carry.If it’s not listed in thecatalog give us a call!
FLATHEAD V8 HEAD GASKETSReplacement head gaskets for the Flathead V8. Big bore gaskets andcomplete engine gasket sets are available.32-37 BES-507-G 29.99 EA38-42 BES-505-G 29.99 EA46-48 BES-511-G 29.99 EA49-53 RH BES-521-G2 29.99 EA49-53 LH BES-521-G1 29.99 EA
FLATHEAD HEAD BOLTS FOR ALUMINUM HEADSWhen using aluminum heads, studs just won’t do. These are the boltsused to put the heads back on. Kit includes 48 bolts and washers.32-48 HEAD BOLTS HRC-HB48 99.99 KIT49-53 HEAD BOLTS HRC-HB53 99.99 KIT
FLATHEAD V8 VALVE GUIDESNew valve guides for the Ford Flathead V8.32-48 FOR-40-6510 9.99 EA
JOHNSON STYLE ADJUSTABLE LIFTERSBrought back by popular demand, these Johnson style hollow adjustablelifters make any Ford flathead V8 a better motor.JOHNSON LIFTERS RED-VT-770
OFFENHAUSER FLATHEAD ACCESSORIESOffy’s own accessories for the Flathead V8. These work great with theirintakes and heads. Call for more accessories.3 x 2 THROTTLE LINKAGE OFF-2866 49.99 KIT3 x 2 PROGRESSIVE LINKAGE OFF-6271 82.99 KIT49-53 OFFSET WATER NECK OFF-3794 34.99 EA2 THRU 4 FUEL BLOCK OFF-1081 50.00 EA
OFFENHAUSER FLATHEAD 2x2 & 3x2 INTAKE MANIFOLDSIncrease your power and dress-up that Flathead at the same time. TheseOffy intakes are designed for equalized fuel distribution and maximumefficiency throughout all RPM range. These are for use with the stockFlathead 94 or 97 carbs. Just a few are listed, please call for others.32-48 2x2 INTAKE OFF-1090 350.00 EA49-53 3x2 INTAKE OFF-1077 379.99 EA
INTAKE MANIFOLD GASKETSWhen changing to that 2-2 or that 3-2 intake, or just replacing theoriginal, don’t forget the gasket.32-53 BES-21005-E 12.00 EA
FLATHEAD V8 OIL FILTERDrop in paper filter for the cartridge style oil filter.OIL FILTER EV8-7HA-6731 16.99 EA
OIL PRESSURE SENDING UNITAftermarket oil pressure sending unit for the Flathead Fords.OIL SENDING UNIT MAC-41A-9278 12.99 EA
FLATHEAD V8 TEMPERATURE SENDERThese are the USA made senders that work. Single prong is on thepassenger side, double is driver side. These wire in series for a balanceof water temp.49-53 SINGLE PRONG FOR-8A-10884-USA 74.99 EA49-53 DOUBLE PRONG FOR-8A-10990-USA 74.99 EA
FLATHEAD V8 THERMOSTATS160 degree thermostats for the Ford Flathead V8s.37-48 EV8-11A-8575-A 11.99 EA49-53 DEN-1BA-8575 7.99 EA
NEW SEALED WATER PUMPSBrand new pumps for the Flathead Ford V8. Includes new pulley.37-48 RH PUMP SPD-910-15593-RH 99.99 EA37-48 LH PUMP SPD-910-15593-LH 99.99 EA
ALTERNATOR CONVERSION BRACKETThis bracket mounts to the front of the intake manifold of the FlatheadV8 and supports a GM alternator . You will also need the alternatorpulley listed below in order to use the flathead belts.38-45 PLAIN SPD-916-67908 49.99 EA38-45 CHROME SPD-916-67907 95.99 EA46-53 PLAIN SPD-916-67910 49.99 EA46-53 CHROME SPD-916-67909 95.99 EA
ALTERNATOR CONVERSION PULLEYThis pulley fits the late model GM alternators and work with the “wide”flathead generator belts. Correct diameter and belt with for Flatheadsand Model As. Steel finish.ALTERNATOR PULLEY VIN-A-10130-ALT 18.99 EA
18
Vintage Ford & Chevrolet Parts of Arizonawww.so-calspeedshopAZ.com
STARTER DRIVE (BENDIX)This is the gear on the shaft of the starter. Includes spring.28-48 BENDIX LIT-B-11350 45.99 EA28-48 SPRING ONLY FOR-B-11375 10.99 EA
FLATHEAD FAN AND GENERATOR BELTSNew belts for the Flathead Ford V8 engines.32-36 FAN BELT LIT-40-8620 15.99 EA37-48 FAN BELT LIT-78-8620 16.99 EA42-48 GENERATOR BELT LIT-21A-8577 15.99 EA50-53 V8 FAN BELT CEN-7417 14.99 EA50-53 V8 GEN BELT CEN-7516 14.99 EA
FLATHEAD V8 MOTOR MOUNTSRubber cushions, washers, bolt, and hardware for mounting the front ofthe Ford Flathead V8 to the frame. These are the biscuit style that mountunder the water pumps. Optional chrome band & washer set (SS-0011)32-36 MOUNT VIN-B-6038-S 16.99 EA37-48 MOUNT VIN-78-6038-S 16.99 EA32-48 MOUNT W/CHROME CHA-SS-0011 29.99 PR
ALUMINUM WATER NECKHot rod style bolt-on water neck for the 1949-53 Ford Flathead V8.49-53 WATER NECK VIN-8A-8592-HR 12.99 EA
FLATHEAD SPARK PLUGSTime to tune up your flathead V8? We’ve got plugs to help you do it.32-36 CHAMPION CEN-555 4.50 EA37-53 CHAMPION CAQ-844 3.29 EA
FLATHEAD V8 DISTRIBUTOR PARTSReproduction caps, rotors, points, and more for the original FordFlathead V8 distributors. 42-48 outer cap is the flat “crab-style” cap.1932-41 OUTER CAP MAC-18-12105 16.99 EA1932-36 INNER CAP MAC-18-12116 21.00 EA1937-41 INNER CAP MAC-68-12116 21.00 EA1942-48 OUTER CAP MAC-21A-12106 20.99 EA1946-48 INNER CAP MAC-59A-12106-F 34.99 EA1932-36 POINTS MAC-18-12107 17.99 EA
COIL ADAPTER KITConvert from the original coil on the distributor to the tube type coil.1933-36 KIT DEN-18-12036-S 48.99 KIT1937-41 KIT DEN-78-12036-S 45.99 KIT
FINNED COIL COVER & CHROME COILThe coil is a super duty 12 volt and includes a chrome bracket. Cover ispolished cast aluminum. Hardware included.CHROME COIL WYS-WA-9203 29.99 EAFINNED COVER MAU-HRP-90002 39.99 EACOMBINATION SOC-62062 49.99 EA
ENGINE PARTS & ACCESSORIES
WELD-IN ENGINE MOUNTS FOR FORD FRAMESThese mounts come as a pair, one for the drivers frame rail one for thepassengers. Made for mounting either a Chevy or 289-351 Ford in yourearly car or truck. The 35-40 mounts can be universal.1932 CHEVY ENGINE PET-3005 76.99 PR1932 FORD ENGINE PET-3034 76.99 PR1933-34 CHEVY ENGINE PET-4005 79.99 PR1933-34 FORD ENGINE PET-4006 79.99 PR1935-40 CHEVY ENGINE PET-5005 88.99 PR1935-40 FORD ENGINE PET-5006 88.99 PR
SMALL BLOCK MOTOR & TRANNY MOUNTSNew rubber mounts for the Small Block Chevys and auto transmissions.These will fit the So-Cal, TCI, and Pete& Jake style steel mounts.MOTOR MOUNT MOB-X2142 2 REQ 13.99 EATRANNY MOUNT MOB-X2268-C 16.99 EA
STAINLESS STEEL FLEXIBLE RADIATOR HOSESFlexible radiator and heater hose kits for dressing up your enginecompartment. Cut to length. These kits include the stainless hose,rubber and aluminum ends, and clamps. 48 inch kit includes enoughparts to do both an upper and lower hose.12” RADIATOR HOSE WYS-WA-7301 58.99 KIT24” RADIATOR HOSE WYS-WA-7304 74.99 KIT
ALUMINUM WATER NECKSSmall block Chevy water necks. These aluminum necks swivel 360degrees to allow for proper radiator hose alignment. Necks include o-ring gasket and allen head mounting bolts. Available with the outleteither pointing straight up (non-swivel), 45 degrees up, or 90 degrees.STRAIGHT WYS-WA-6002 18.99 EA45 DEGREE WYS-WA-6003 21.99 EA90 DEGREE WYS-WA-6014 21.99 EA
SMALL BLOCK CHEVY CHROME WATER NECKThis chrome water neck fits the small block Chevy and points off to thedriver side. It also is drilled and tapped with 3/8 pipe thread fitting for adirect mount temp gauge.WATER NECK MOO-MP9468 25.99 EA
HOT ROD FINNED VALVE COVERS AND AIR CLEANERSTraditional Looking finned aluminum valve covers have ports for oil filland breathers, alson include baffles. Fit the 86 and earlier heads.Matching oval (12”) or round (14”) air cleaners.VALVE COVER MIS-2551 159.99 PROVAL MIS-2563 119.99 EAROUND MIS-2565 119.99 EA
CHROME ENGINE ACCESSORIESStamped steel chrome plated goodies that feature our So-Cal script logo.Great for hot rods or daily cruisers.SB SHORT VALVE COVERS SOC-41001 39.99 PRSB TALL VALVE COVERS SOC-41002 45.99 PRBB TALL VALVE COVERS SOC-41003 49.99 PR14” x 3” AIR CLEANER SOC-41018 49.99 PR
MOON EYE’S FINNED NO-NAME VALVE COVERSCast aluminum finned valve covers are made for many engines. Here’sjust a few for small block Chevys and Fords. Call for more applications.CHEVY 86 & EARLIER MOO-MP649 225.99 PRCHEVY 87 & LATER MOO-MP659 289.99 PRFORD 289-302 MOO-MP655 215.00 PR
FINNED AIR CLEANERThese air cleaners match the valve covers above and give your enginecompartment a good finished look.ROUND 14 INCH MOO-AA720 219.99 EAOVAL MOO-MP710 199.99 EA
MOON & SO-CAL BREATHERSPolished aluminum breathers with caps made to bolt to the side or top ofyour valve cover. Includes reusable foam insert, gasket, and mountinghardware. Cool moon tag riveted to the top.HI-RISE BREATHER (a) MOO-MP1700 39.99 EALO-BOY BREATHER (b) MOO-MP1700-LB 39.99 EARIGHT ANGLE BREATHER (c) MOO-MP1800 41.99 EASO-CAL BREATHER (d) SOC-41011 10.99 EA
FINNED CAST ALUMINUM ACCESSORIESCast aluminum polished pans to dress up the under carriage of your ride.Nice heavy construction. Gaskets not included. Small block Chevys.65-79 OIL PAN SOC-140-8422 99.99 EA80-84 OIL PAN GEM-WA-8443 109.99 EA85-UP OIL PAN GEM-WA-8444 109.99 EA350 FLYWHEEL COVER WYS-WA-9588-A 75.99 EA350 TRANS PAN WYS-WA-84.91 76.99 EA400 TRANS PAN WYS-WA-8492 79.99 EA700 TRANS PAN WYS-WA-7599-POL 79.99 EA
AIR CLEANER STACKSThese stacks will take any multi carburetor set up and finish it off.Great add-ons for a classic look. These are available either “Finned”,“Trumpet mouth”, or “Frog mouth”.FINNED POLISHED (a) MAU-211-90001 49.95 EAFINNED SATIN (a) MAU-211-90000 49.95 EATRUMPET MOUTH (b) MIS-V03 54.99 EAFROG MOUTH (c) SOC-189-10002 49.99 EA
a b
c
e f
d
20
Vintage Ford & Chevrolet Parts of Arizonawww.so-calspeedshopAZ.com
LOUVERED AIR CLEANERSmall 4 1/2” air cleaners for the old Ford 94 or 97 carbs. Come completewith mounting clamp and air filter. (Pictured on page 19)AIR CLEANER (d) PAC-A-6216 12.99 EAREPLACEMENT FILTER PAC-A-6216-4 4.99 EA
CHROME AIR CLEANERSCool 50’s nostalgia designed air cleaners for early Ford 2bbl, modern2bbl, and 4bbl applications. Includes paper elements. 10 1/2” and 7 1/2diameter cleaners fit the modern 2bbl and 4bbl, 4 9/16” diameter fit 94sand 97s carbs. (Pictured on pg. 19)4 9/16 CLEANER (e) WOL-062-SH400-C 51.99 EA10 1/2” CLEANER (f) WOL-062-SH100 159.99 EA7 1/2” CLEANER (f) WOL-062-SH700 95.99 EA4 9/16” CLEANER (f) WOL-062-SH400-R 53.99 EA
CHROME ENGINE PULLEYSThese pulleys are simple and clean. The ones listed here fit small blockChevys with short water pump. Long water pump and big block pulleysare also available, please call for info.W/P SINGLE GROOVE WYS-WA-9600N 27.99 EAW/P DOUBLE GROOVE WYS-WA-9601X 32.99 EACRANK SINGLE GROOVE WYS-WA-9602 26.99 EACRANK DOUBLE GROOVE WYS-WA-9603 28.99 EAADD ON 3RD GROOVE WYS-WA-9603-1 41.99 EA
ZOOP’S ALUMINUM ENGINE PULLEYSForged 6061-T6 billet aluminum pulleys for both small and big block,Ford and Chevy motors, v-belt and serpentine systems. Give us a callwith your specs, and we’ll be glad to help set you up. Ford pulleysrequire specific water pump and timing cover.WATER PUMP PULLEYS STARTING AT 75.99 EACRANK PULLEYS STARTING AT 63.99 EAALTERNATOR PULLEYS STARTING AT 40.99 EAA/C CLUTCH COVERS STARTING AT 53.99 EAPOWER STEERING PULLEYS STARTING AT 73.99 EA
SPARK PLUG WIRE LOOMSBillet aluminum , machined, and then polished looms for hiding the plugwires along the motor. Includes mounting hardware. Two piece designfor easy mounting. Universal kits fit all types of motors.UNIVERSAL LOOMS ZOO-2000 59.99 PRUNIVERSAL “BOWTIE” ZOO-2000-BT 59.99 PRLATE MODEL GM ADAPTERS ZOO-2051 17.99 PR
POLISHED TIMING CHAIN COVERPolished aluminum timing chain cover for the small block Chevy.TIMING COVER WYS-WA-6040BOX 39.99 EA
ALUMINUM PUSH-IN BREATHERS AND PVCPush-in polished aluminum breathers and pvcs. These fit GM and someothers. Complete with grommet.PLAIN BREATHER ZOO-3000 29.99 EAGROOVED BREATHER ZOO-3005 29.99 EAPLAIN PVC ZOO-3051 32.99 EAGROOVED PVC ZOO-3175 29.99 EA
POLISHED ALUMINUM INTAKE MANIFOLDDual plane, polished, low rise manifold for small block engines. 0-5500rpm power band. Will fit spread-bore and square-flange carbs.85 & EARLIER CHEVY PAR-PRF-52000 219.99 EA86 & LATER CHEVY PAR-PRF-52020 219.99 EA289-302 FORD PAR-PRF-54000 229.99 EA
EARLY SMALL BLOCK CHEVY INTAKESo-Cal’s Alumuinum intake with oil fill tube for a SBC. Great for thattraditional look. Dual-plane 180-degree street manifold. Mounts Holley,Carter AFB, or Edelbrock carbs. Available in a Polished aluminum or aSatin finish.POLISHED SOC-62301 279.99 EASATIN FINISH SOC-62302 209.99 EA
FLEXIBLE ENGINE DIPSTICKSBraided, flexible, stainless steel dipstick with aluminum knob. Worksgreat with manifolds or headers. Give a call if you don’t see one for you.79 & EARLIER GM LOK-ED-5002 56.99 EA80 & LATER GM LOK-ED-5001 56.99 EA62-69 289-302 FORD LOK-ED-5010 56.99 EA86-95 302 FORD LOK-ED-5004 56.99 EA351 FORD SCREW-IN LOK-ED-5005 56.99 EA
ALTERNATOR & A/C BRACKETSSteel brackets by Bill’s Hot Rod Company for mounting the Sanden a/ccompressor and GM alternator to your Chevy motor. Many applica-tions are available, but only a few are listed. These mount using thewater pump and intake manifold. Offered in plain steel, black powdercoat, or chrome. These are for the short water pump.SBC PLAIN SHORT BIL-210 189.99 SET
SBC BLACK SHORT BIL-211 214.99 SETSBC CHROME SHORT BIL-212 345.99 SETBBC PLAIN SHORT BIL-407 205.99 SETBBC BLACK SHORT BIL-408 233.99 SETBBC CHROME SHORT BIL-409 339.99 SET
SO-CAL ALTERNATOR BRACKETEasy to use bracket that mounts the GM alternator to the small blockChevy. Uses water pump and intake for mounting points. No need forholes in the heads. Mounts to the passenger side of the motor.ALTERNATOR BRACKET SOC-60300 49.99 EA
ZOOP’S A/C COMPRESSOR AND ALTERNATOR BRACKETS“Correct-Align” aluminum brackets for mounting the GM alternator andSanden 508 compressor to small and big block Chevy and Ford engines.These are designed with the capability of moving the alt and compressorforward and back 3/4” to align perfectly with your pulley system. Theyare available for V-belt and Serpentine. Be sure to call so we can set youup with the application that will best work for your engine. Ford bracketsrequire specific water pump and timing cover.CHEVY BRACKET KITS STARTING AT 299.99 KITFORD BRACKET KITS STARTING AT 369.99 KIT
BILL’S BRACKETS POWER STEERING BRACKETS(pictured on pg. 8)More cool brackets made by Bill’s Hot Rod. These brackets mount tothe two lower left front bolt holes located by the timing cover and mountthe early style GM pump with integral reservoir. Small block brackethas two mounting positions (high & low) Big block has three (high,medium, & low). Both fit either short or long water pumps.SBC PLAIN BIL-301 74.99 EASBC BLACK BIL-302 87.99 EASBC CHROME BIL-303 119.99 EABBC PLAIN BIL-501 89.99 EABBC BLACK BIL-502 99.99 EABBC CHROME BIL-503 131.99 EA
POWER STEERING COMPONENTSZoops also manufactures their “Correct-Align” brackets for the GMpower steering pumps, either early style with integral reservoir, or type IIpump with remote reservoir. Give a call for applications and prices.PUMP BRACKETS STARTING AT 139.99 EAPOWER STEERING PULLEY STARTING AT 72.99 EAREMOTE RESERVOIR (pg. 8) ZOO-6180 149.99 EA
289-302, 351 SVO COMPLETE BRACKET AND PULLEY SETThese kits give you everything you’ll need, with the exception of thedamper (Ford # E4TZ-6316-A), to mount the GM alternator and Sandencompressor to your Ford motor. Kits include a/c and alt brackets, waterpump pulley, crank pulley, alt pulley, Ford short water pump, and Fordtiming cover. Bolt on kit.289-302 V-BELT KIT ZOO-1004 1,195.99 KIT289-302 SERPENTINE KIT ZOO-1005 1,195.99 KIT351 SVO V-BELT KIT ZOO-1006 1,195.99 KIT351 SVO SERPENTINE KIT ZOO-1007 1,195.99 KITBIG BLOCK FORD KITS ARE AVAILABLE CALL FOR PRICES
CHROME ALTERNATORSBrand new GM chrome alternators made to fit GM or Ford engines.Alternators can be wired as 1 or 3 wire and they are internally regulated.80 AMP GM TUF-7127NB 99.99 EA100 AMP GM TUF-7127ND 99.99 EA100 AMP FORD TUF-7068RD 139.99 EA
ALTERNATOR PULLEYDress up you GM alternator with a clean aluminum pulley.ALT PULLEY ZOO-6009-FP 38.99 EAALT PULLEY AND FAN ZOO-6009-2 72.99 EA
SIX VOLT POSITIVE GROUND ALTERNATORThese 60 amp alternators are rewound to 6 volts and positive ground.6 VOLT ALT. MAC-A-10000-A 158.99 EA
HI-TORQUE MINI STARTERSTired of slow dragging factory starters? One of these mini-hi-torqueguys will get you cranked. New manufactured, not rebuilt. Includesmounting bolts.PLAIN TUF-6584B 149.99 EACHROME TUF-6584A 209.99 EA
PERTRONIX IGNITORKit to convert the original point and condenser style distributors to asolid state electronic system. Easy 15 minute installation. Helps carsrun cooler, get better mileage, and start easier.1962-74 6 CLY CHEVY PER-1162-A 83.99 KIT1958-74 V8 SINGLE POINT CHEVY PER-1181 81.99 KIT1958-74 V8 CHEVY PER-91181 121.99 KITFORD 6 CYLINDER PER-1261 83.99 KITFORD V8 SINGLE POINT PER-91281 121.99 KITFORD V8 PER-1281 89.99 KIT
22
Vintage Ford & Chevrolet Parts of Arizonawww.so-calspeedshopAZ.com
FLAME THROWER IGNITION COILBlack or Chrome high performance ignition coil for use with the “Ignitor”or with other ignition systems. These offer 40,000 volts for addedpower, smoother response and better fuel economy.BLACK COIL PER-40011 32.99 EACHROME COIL PER-40001 38.99 EAPERTRONIX II COILBLACK EPOXY COIL PER-45111 45.99 EABLACK COIL PER-45011 37.99 EACHROME COIL PER-45001 41.99 EA
ENGINE & FRAME HARDWARE
ENGINE DRESS UP KITSChevy kits include: Intake manifold, valve cover, water neck, waterpump, timing cover, fuel pump, oil pump, distributor hold down, andeither headers or std exhaust bolts. Small block kits come with shortwater pump bolts, big block has them for the long water pump. Ford kitsinclude the same as the Chevy, but do not come with water pump bolts.All kits include washers where applicable. Call for styles, finishes, andprices.SBC W/HEADERS STARTING AT 52.99 KITBBC W/HEADERS STARTING AT 55.99 KIT289-302 FORD W/HEADERS STARTING AT 45.99 KIT351-460 FORDS CALL FOR KIT INFORMATION
INDIVIDUAL CHEVY & FORD ENGINE COMPONENT KITSThese are for small block Chevy and 289-302 Ford, All others please call.Individual kits are available in chrome, stainless, and polished stainless,in either hex, allen, button head allen, or 12-point. All kits listed beloware hex head chromed plated, call for prices on others.CHEVY INTAKE GWC-56469-H 8.99 KITCHEVY SHORT W/P GWC-56468-H 4.99 KITCHEVY LONG W/P GWC-56467-H 5.99 KITCHEVY HEADERS GWC-56461-H 16.99 KITCHEVY FUEL PUMP GWC-56460-H 4.59 KITCHEVY OIL PAN GWC-56465-H 10.99 KITCHEVY VALVE COVER GWC-56463-H 4.99 KIT
STAINLESS STEEL LINE CLAMPSStainless steel clamps for keeping hard lines, hoses, wiring, and so-on, inplace. Single clamps hold one line, doubles hold two side by side.Single kits include 12 clamps (sizes 3/16-1/2inch) and 8 clamps (sizes 5/8- 7/8). The double kits include 6 clamps (sizes 3/16- 1/2) and 4 clamps(sizes 5/8- 7/8). Kits include stainless 10/32 button head allen screwsand stainless Phillip head sheet metal screws.3/16 SINGLES KUG-LC-1700 19.99 KIT1/4 SINGLES KUG-LC-1701 19.99 KIT5/16 SINGLES KUG-LC-1702 19.99 KIT3/8 SINGLES KUG-LC-1703 19.99 KIT1/2 SINGLES KUG-LC-1704 19.99 KIT5/8 SINGLES KUG-LC-1715 19.99 KIT3/4 SINGLES KUG-LC-1716 19.99 KIT7/8 SINGLES KUG-LC-1717 19.99 KIT3/16 X 3/16 DOUBLES KUG-LC-1700-D 19.99 KIT1/4 X 1/4 DOUBLES KUG-LC-1701-D 19.99 KIT5/16 X 5/16 DOUBLES KUG-LV-1702-D 19.99 KIT3/8 X 3/8 DOUBLES KUG-LC-1703-D 19.99 KIT1/2 X 1/2 DOUBLES KUG-LC-1704-D 19.99 KIT5/8 X 5/8 DOUBLES KUG-LC-1715-D 19.99 KIT3/4 X 3/4 DOUBLES KUG-LC-1716-D 19.99 KIT7/8 X 7/8 DOUBLES KUG-LC-1717-D 19.99 KIT3/16 X 3/8 DOUBLES KUG-LC-1726-CD 19.99 KIT5/6 X 3/8 DOUBLES KUG-LV-1729-CD 19.99 KIT
TRANSMISSION PARTSAUTOMATIC TRANSMISSION SHIFTERSThese are made for just about any GM, Ford, and Chrystler automatictransmission. They are complete with push button shift knob, neutralsafety switch, mounting kit, shift arm linkage, hardware, and instruc-tions. These are bolt-on and are completely adjustable. They havedifferent shift lever lengths, either 23,16,12,10,8, or 6 inches long, anddifferent mounting positions, either transmission body mount, tail shaftmount, or floor mount. Please call for part numbers and prices on yourapplication.
TRANS MOUNT STARTING AT 209.99 KITTAIL SHAFT MOUNT STARTING AT 199.99 KITFLOOR MOUNT STARTING AT 209.87 KIT
AUTOMATIC TRANSMISSION SHIFT BOOTS(pictured on previous column)Black naugahyde boots with chrome trim rings. The classic boot has achrome ring with a chrome collar at the top, the hot rod boot has achrome ring at the base with a tight fit sewn collar.CLASSIC BOOT LOK-70-CLB 32.99 EAHOT ROD BOOT CHROME LOK-70-HRB 26.99 EA
CABLE SHIFT LINKAGE (pictured on pg. 11)Universal cable system that connects the shifter on the column to thetransmission. Comes as a complete kit including cable, brackets, andhardware.GM TRANSMISSION IDI-28010000010 128.99 KITC-4 TRANSMISSION IDI-28013000010 157.99 KITC-6 TRANSMISSION IDI-28014000010 157.99 KITAOD TRANSMISSION IDI-28015000010 197.99 KIT727 TRANSMISSION IDI-28017000010 173.99 KIT904 TRANSMISSION IDI-28017000010 173.99 KIT
SHIFT ARM KITS (pictured on pg. 11)This is used for connecting your column to the transmission shiftlinkage. Kit includes shift arm, ball pivot studs (adjustable for long orshort stroke shifters), column bushings, connecting rod, and all neces-sary hardware. Fits Ford and GM transmissions, TH-200, 350, 400,700r4, 4L60, 4L60E, AND 4L80E.G M LOK-ACA-1800 55.99 KITFORD LOK-ACA-1801 55.99 KIT
TRANSMISSION MOUNTING KITThis kit is for 37-40 Fords using a turbo 350 tranny. Kit is designed tomount the 350 into the stock frame while re-supporting the x-brace.1937-40 FORD CHA-ES-2167 132.99 KIT
TRANSMISSION DIPSTICKSLokar’s flexible braided stainless steel dipsticks with aluminum knobs forreading transmission levels. There are two styles, one mounts to theback of the block (TM), the other is 24 inches long and can mounted tothe firewall or inner apron (FM). If you don’t see yours listed, pleasecall.350 TRANS MOUNT LOK-TD-3350TM 74.99 EA350 FIREWALL MOUNT LOK-TD-3350400FM 81.99 EA700R4 TRANS MOUNT LOK-TD-3700TM 75.99 EA700R4 FIREWALL MOUNT LOK-TD-3700FM 80.99 EAC4 TRANS MOUNT LOK-TD-30C4TM 79.99 EAC4 FIREWALL MOUNT LOK-TD-30C4FM 81.99 EA
TRANSMISSION DIPSTICKSGotta Show’s braided flexible stainless transmission dipsticks forChevys and other engines. These have stainless mounting brackets withstainless knobs. Two styles, engine mount or firewall mount areavailable. Firewall mount dipstick is universal and fits all GM, and mostFord and Chrysler.350/400 TRANS MOUNT GOT-253002700R4 TRANS MOUNT GOT-253001FIREWALL MOUNT GOT-253011
GM TRANSMISSION COOLER LINEBraided stainless lines for distributing the GM’s transmission fluid fromthe tranny to the cooler and back. Works with 700R4, 200-4R, 350, and400 trans. Transmission adapters (converts to -6an) are included in thehose kit, You’ll need the radiator adapters to go from 1/8” npt on theradiator to the -6 an on the hoses. All other fitting included.TRANSMISSION COOLER LINE GOT-231101 135.99 KITRADIATOR ADAPTORS GOT-231102 19.99 PRTRANNY ADAPTERS ONLY GOT-231103 20.99 PR
UNIVERSAL TRANNY COOLER KITComplete kit that includes a universal mount tube and fin style cooler,braided stainless hoses, and all fittings. Works for all Chevytransmissions.TRANNY COOLER GOT-231106 179.99 KIT
RADIATOR & RELATED
RADIATOR MOUNTING KITBolts, springs, and pads that mount the 1932-48 Ford radiator to theframe. Stainless kit has polished bolts, springs, and ny-lock nuts.BLACK KIT VIN-B-8130-S 5.99 KITSTAINLESS KIT VIN-B-8130-SS 16.95 KIT
24
Vintage Ford & Chevrolet Parts of Arizonawww.so-calspeedshopAZ.com
RADIATORS (Pictured on previous pg.)Walker radiators are designed to fit and mount just like the originals. Noalterations to grill shells, fenders, or aprons are needed. These are 4 row,brass radiators with an internal transmission cooler. Designed to workwith 15-18lb caps. Five year warranty. We can get these radiators forFords, Chevys, Mercs, Dodges, Plymouths, Buick, Pontiac, and Olds.Give us a call for your application.Z-SERIES 4 ROW RADIATOR STARTING AT 736.99 EAZ-SERIES W/ A/C CONDENSER STARTING AT 884.99 EA
RADIATOR SUPPORT RODSPolished stainless rods that run from the firewall to the radiator and holdit in place.28-31 FORD VIN-A-8133-SS 40.00 PR32-39 FORD VIN-B-8133-SS 27.99 PR
SUPPORT ROD BRACKETSPolished stainless brackets that mount to the firewall and hold thesupport rods.28-32 CAR 32-34 TRUCK VIN-B-8140/41-SS 11.99 PR33-39 CAR VIN-40-8140/41-SS 18.99 PR
“MAX AIR” FAN SHROUDSThese shrouds are constructed of abs plastic and come in a variation ofsizes. They are a solid face shroud, requiring you to cut the fan opening.Give us a ring with the dimensions of your radiator and we’ll find onethat will work for you.FAN SHROUDS STARTING AT 65.99 EA
STAINLESS RADIATOR OVERFLOW TANKSTubular style, stainless steel overflows for hot rods or stock cars. Thesehave an inlet for the hose from the radiator and a drain if the overflowgets to full. Four different lengths are available 13”,15”,17”, or 19”long. These include a nice stainless screw-on cap and mounting kit.13” OVERFLOW WYS-WA-6073 55.00 EA15” OVERFLOW WYS-WA-6075 55.00 EA17” OVERFLOW WYS-WA-6077 55.00EA19” OVERFLOW WYS-WA-6079 55.00 EA
RADIATOR CAPStock and aftermarket radiator caps available. Choose from original 4 lb;bowtie, smooth, and newstalgia are 17 lbs cap.1937-48 FORD MAC-41A-8100-A 9.99 EASMOOTH CAP ZOO-9021 18.99 EANEWSTALGIA CAP ZOO-9020N 19.99 EA
STAINLESS STEEL FLEXIBLE RADIATOR HOSES(Pictured on pg. 18)Flexible radiator and heater hose kits for dressing up your enginecompartment. These will bend and twist where needed and hold theirshape. Cut to length. These kits include the stainless hose ,rubber andaluminum ends, and clamps. 48 inch kit includes enough parts to doboth an upper and lower hose.12” RADIATOR HOSE WYS-WA-7301 58.99 KIT24” RADIATOR HOSE WYS-WA-7304 74.99 KIT36” RADIATOR HOSE WYS-WA-7307 89.99 KIT48” RADIATOR HOSE WYS-WA-7310 99.99 KITHEATER HOSE KIT WYS-WA-7313 99.99 KIT
ENGINE COOLING FANS
ELECTRIC COOLING FANS (SPAL)Tired of spending more time looking at your temp gauge than the road?Maybe one of these electric fans will help. There are a variety of fanswith different diameters, depths, and cfm ratings. These are our mostpopular “movers” with great cooling capacity. The bigger the fan youcan install the more air you’ll move. The 16” fan will move 3000 cfm. Wehave them in push or pull. Call if you need more measurements or helpchoosing which one will work best for you.10” PULL FAN (107 CFM) FAN-2057 149.99 EA11” DUAL FANS 2780 CFM FAN-2052 299.99 KIT12” PULL FAN (1360 CFM) FAN-2030 154.99 EA14” PULL FAN (1720 CFM) FAN-2042 154.99 EA16” PULL FAN (2360 CFM) FAN-2120 154.99 EA16” PUSHER 2360 CFM FAN-2047 159.99 EA16” PULL FAN (3000 CFM) FAN-2113 269.99 EAELECTRIC FAN MOUNT KIT FAN-FMK 21.99 SET
ELECTRIC FAN WIRING KITSWiring kits for installing electric fans into your vintage hot rod or musclecar. These kits include relays, breakers, and wiring to connect the fancorrectly to your electrical system. Wiring kit allows for the fan to turnon with the ignition or a manual switch. Also available is an adjustableand preset 190 degree temperature switch.WIRING KIT AIR-23101-VUW 24.99 EAADJUSTABLE SWITCH AIR-24675-VUT 30.99 EAWIRING W/190 SWITCH AIR-24190-VUT 79.99 EA
STEEL ENGINE DRIVEN FANSThese six bladed steel fans move air through the radiator and out of theengine compartment with force. Direct mount to the water pump andwill fit Ford, Chevy, Mopar and more. Be sure to measure for clearanceof hoses and wiring, and don’t forget a fan shroud.15 1/4” STEEL FAN DER-17315 59.99 EA17 1/4” STEEL FAN DER-17317 59.99 EA18 1/4” STEEL FAN DER-17318 59.99 EA19 1/4” STEEL FAN DER-17319 59.99 EA
FUEL SYSTEM
FLEXIBLE FUEL LINELine that connects the steel line on the firewall to the pump. V8.1932-48 MAC-18-9288 9.99 EA1949-50 LIT-7HC-9288 9.99 EA1951-53 LIT-1BA-9288 9.99 EA
FUEL PUMP TO CARBURETOR LINECopper line and fittings that connect theV8 fuel pump to the carb.FUEL PUMP LINE SAC-5859 5.99 EA
CARBURETOR REBUILD KITSThese kits have the parts and gaskets to rebuild your Flathead V8 carb.PREMIUM 97 REBUILD KIT STR-9590K-97 49.99 KITMODEL 97 CARB KIT SAC-5892 23.99 KITMODEL 94 CARB KIT SAC-5893 23.99 KITMODEL 97 GASKETS ONLY SAC-5895 6.99 SETMODEL 94 GASKETS ONLY SAC-5896 5.99 SET
NEW STOMBERG 97 CARBURETORYes, they’re back, even though they never went away. And they’re justthe same, But better than ever. A brand new carburetor with Strombergon one side. And a big fat 97 on the other. Please call or email for moreinfo. Individual parts and hardware are available.NEW 97 CARB STR-9510-A 445.00 EA
REPRODUCTION STEEL FORD GAS TANKSNew steel gas tanks. Made to fit and look just like the original. Willaccept the aftermarket 5 bolt and repro sending units.32 FORD VIN-B-9002 449.99 EA33-34 CAR BOB-40-9002 259.99 EA34 VICY, 35-37 PICK-UP BOB-67-9002 329.99 EA38-40 CAR & PICK-UP BOB-81A-9002 329.99 EA39-40 MERC BOB-99A-9002 329.99EA41-48 FORD & MERC BOB-11A-9002 239.99 EA
1932 GAS TANK ACCESORIESThese are a close copy of the originals.32 FUEL PICK-UP VIN-B-9274 40.00 EA32 GAS TANK MOUNT KIT VIN-B-9002-SK 7.00 EA
FUEL TANK FILLER HOSENeoprene hose that connects the steel filler pipe to the gas tank.37-40 DEN-78-9047 14.99 EA41-48 DEN-21A-9047 9.00 EA
GAS NECK GROMMETRubber grommet in the rear fender that the fuel filler pipe passesthrough.33-34 DEN-40-9080 11.99 EA35-36 DEN-48-9080 12.99 EA37-40 DEN-91A-9080 7.99 EA
GAS TANK SENDING UNITThis sender will fit both the original fuel tanks and the reproductiontanks made by Bob Drake. These will work only on the stock Ford fuelgauge in the dash. Will work on 6 or 12 volt systems.36-55 FORD BOB-99A-9275 55.99 EA
GAS CAPSOriginal style cap for the Ford stock style gas tanks. These are thetwist-on type. Stock looking cap and aftermarket caps are available.32-48 STOCK CAP VIN-B-9030-SS 15.99 EA32-48 AFTERMARKET CAP VIN-11C-9030-A 9.00 EA32-48 V8 CAP VIN-B-9030-V8 16.50 EA
FLATHEAD V8 FUEL PUMPSStock replacement fuel pumps for the early Ford V8s. These look, workand hook up just like the original.32-48 V8 STEEL BOWL MAC-11A-9350 69.99 EA38-48 V8 GLASS BOWL MAC-59A-9350 69.99 EA49-50 V8 DEN-578-9350 79.99 EA51-53 V8 DEN-9785-9350 69.99 EA
FUEL DISTRIBUTION BLOCKS3 and 4 hole fuel blocks made from original tooling. Cast aluminum ArtDeco style fuel blocks are the perfect addition to any rod or custom.THREE HOLE SOC-HRP-90003 40.99 EAFOUR HOLE SOC-HRP-90004 40.99 EA
ELECTRIC FUEL PUMPClean in-line style electric pump. This is available 6 or 12 volt andincludes, filter, fittings, and mounting hardware.6 VOLT PUMP MAC-EFP-9350-6 69.99 EA12 VOLT PUMP MAC-EFP-9350-12 69.99 EA
26
Vintage Ford & Chevrolet Parts of Arizonawww.so-calspeedshopAZ.com
FRAME MOUNTED FUEL FILTERBoth these filters mount to the frame and have a screw-on cap with areplaceable filter in side. The Ac Delco is a simple traditional style filter,the Chrome filter is a little more hot rod looking.AC DELCO (a) FAC-GF62-C 49.99 EACHROME (b) WYS-WP2297 31.99 EA
IN-LINE FUEL FILTERClean aluminum in-line filter for any make or model. This has areplaceable filter and is offered with ends for a push-on hose withclamps or with #6 AN fittings.PUSH-ON HOSE (c) ZOO-7000 40.99 EAAN FITTINGS ZOO-7001 42.99 EA
STAINLESS STEEL GAS TANKSReproduction tanks made to fit where the original tanks were mounted.Some are available in stock size, some are larger for more fuel capacity.These are made of stainless steel and have provisions for the fuel tanksender and gas filler. Please call for application and prices. These areavailable for Fords and Chevys, cars and trucks. Sending unit listed fitsthe five hole aftermarket tanks and will operate the Ford gauge.STAINLESS TANKS STARTING AT 599.99 EAFUEL SENDING UNIT ROC-119-2828-SR 60.99 EA
STAINLESS STEEL THREADED BUNG AND GAS CAPWeld-on neck for the fill spout on the gas tank, and the screw-on cap thatgoes with it. Great for 32 Ford tanks and more.STAINLESS BUNG ROC-119-1640-SR 33.99 EASTAINLESS FUEL CAP ROC-119-2440-P 36.99 EA
FUEL TANK SEALERThis is what you need to help restore your tank. This sealer will coatyour tank with a protective liner and prevent any further corrosion fromfuel or moisture. You must first get your tank cleaned before using this.Resistant to modern fuels.TANK SEALER SAC-10047 47.99 EA
HEADLIGHTS & RELATED
DROPPED HEADLIGHT BARPolished stainless steel dropped headlight bar for the 1932 Ford. This isdesigned to span between the front fenders and mount the headlights abit lower than stock for that hot rod look.1932 SS BAR BOB-B-13114-S 139.99 EA
DROPPED HEADLIGHT BARSMade to fit like the original on a full fendered car, these polishedstainless steel headlight bars feature a built-in drop for that cool hot rodlook. Mounts to stock fenders and braces. Don’t forget the rubbermounting pads and matching stainless mounting bolts.1928-29 HEADLIGHT BAR VIN-A-13114-A 149.99 EA1930-31 HEADLIGHT BAR VIN-A-13114-B 149.99 EA
HEADLIGHT BAR MOUNTING BOLTSThese are the original style bolts for mounting the headlight bars.28-31 MOUNTING BOLTS VIN-A-13130-MBSS 10.00 SET1932 MOUNTING BOLTS VIN-B-13119-SS 8.99 EA
HEADLIGHT BAR PADSRubber pads that fit between the headlight bar and fender.1928-29 RUBBER PADS VIN-A-13130-AS 2.99 PR1930-31 RUBBER PADS VIN-A-13130-BS 2.99 PR32 PASS 33-34 PU DEN-B-13130 8.50 PR33-34 PASS 35-37 PU DEN-40-13130 8.99 PR35 PASS DEN-48-13130 8.99 PR36 PASS DEN-68-13130 8.99 PR
HEADLIGHT BARSSo-Cal’s done it again. They’ve taken the design of the headlight standsand added an arched bar between them to connect them together.Something like the stock head light bar, but made for fenderless cars.Widths are measured between centers of the mounting flanges.32 PINCHED FRAME (21”) SOC-62081 199.99 EAA-V8 FRAME (20 3/4”) SOC-62091 199.99 EA32 STOCK FRAME (22 1/2”) SOC-62100 199.99 EA
HEADLIGHT STANDSNeed a clean set of headlight mounts, and can’t run a full headlight bar?These are a clean way to do it. Mounts right to the frame on fenderlesscars. Polished stainless mounts include mounting hardware.HEADLIGHT MOUNTS SOC-60500 99.99 EA
ARROW HEADLIGHTSAmerican made 7” sealed beam headlights with black buckets and yourchoice of black or chrome rings. These fit right into the stock 28-36Ford mounts, and of course our So-Cal Mounts too.LIGHTS W/BLACK RINGS SOC-62002 112.95 PRLIGHTS W/CHROME RINGS SOC-62003 139.99 PR
EARLY FORD STYLE HEADLIGHTSReproduction headlights for the 1928-34 Fords. Great for original carsand hot rods. Many available. These have 12 volt halogen lights withturn signals, call for other styles.1928 LIGHTS VIN-AR-13000-AQSTS 329.99 PR1929 LIGHTS VIN-A-13000-AQSTS 349.99 PR1930-31 LIGHTS VIN-A-13000-BQSTS 329.99 PR1932 LIGHTS VIN-B-13000-QSTS 339.99 PR1933-34 LIGHTS VIN-40-13000-QPTS 329.99 PR1933-34 PU LIGHTS VIN-46-13000-QSTS 329.99 PR
DIETZ HEADLIGHTS (a, below)Small 7 inch diameter headlights for early hot rods. These are similar tothe King Bees, but have a longer bucket and a standard sealed beamheadlight bulb with a domed lens. These are available with eitherpainted or chrome buckets.BLACK DIETZ VIN-D-13000-SBP 69.99 PRCHROME DIETZ VIN-D-13000-SBC 69.99 PR
KING BEE HEADLIGHTS (b, below)Small 7 inch diameter headlights for hot rods. These use the flat lenshalogen H4 headlight bulbs. They have a small bucket and are availablepainted black, chrome, or stainless steel.BLACK KING BEES VIN-KB-13000-QP 145.99 PRCHROME KING BEES VIN-KB-13000-QC 145.99 PRSTAINLESS KING BEES VIN-KB-13000-QSS 155.99 PR
STAINLESS HEADLIGHT CONDUITBraided stainless conduit for the headlight wires. These have threadedposts on either end that bolt into the back of the headlight and grill shell.Measure 12” long.HEADLIGHT CONDUIT PAR-PRR-6000 62.99 EA
HEADLIGHT CONDUITFlexible stainless loom for running the headlight wires from the bucketto the grill shell. Includes two looms for the headlights and one for thehorn. These are great for the original style 28-32 Ford headlights.CONDUIT SET VIN-A-14578-S 11.99 SET
SEALED BEAM HEADLIGHT WIRE PLUGMolded plastic plug that plugs into the back of the sealed beam orhalogen bulbs. Includes color coded 24” wire leads.HEADLIGHT PLUG VIN-01A-13076-U 3.99 EA
HIGHBOY HEADLIGHT STANDSPolished stainless steel mounts for the headlights. These bolt to the carusing the upper shock mount bolt. Work great with Dietz, King Bees,and original early Ford headlights.HEADLIGHT STANDS VIN-HR-13125/6-SS 59.99 PR
1933-34 CHOPPED HEADLIGHT STANDSChrome or painted stands that mount to the top of the fender and supportthe headlight. Made to look just like the original, but they are choppeddown for that sleek hot rod look.CHROME STANDS VIN-CHP-13125/6-C 52.50 PRBLACK STANDS VIN-CHP-13125/6-B 39.99 PR
1932 V8 HEADLIGHT BAR EMBLEMDie-cast chrome plated emblem that mounts to the front of the headlightbar. “V8” emblem with mounting screw.HEADLIGHT EMBLEM VIN-18-13122 16.99 EA
PARK LIGHTS & TURN SIGNALS
PARK OR TURN SIGNAL LIGHTSBolt on park and or turn signal lights for your hot rod. Diamond andsmall light have only a single wire for park or turn light, medium andlarge lights have 2 wires for park lights and turn signals. These have anamber colored lens.DIAMOND SHAPED LIGHT PAC-30322 12.00 EASMALL LIGHT (shown) PAC-30328 13.50 EAMEDIUM LIGHT PAC-30329 12.00 EALARGE LIGHT PAC-30330 12.00 EA
UNIVERSAL TURN SIGNAL SWITCHThese universal turn signal switches mount with a clamp around thesteering column. They include all mounting hardware, instructions, andcolor coded wire leads. The smaller, more compact switch is just for turnsignals, the larger switch does turn signals, four-way flashers and itlights up.SMALL SWITCH PAC-A-5007 18.99 KITLARGE SWITCH (shown) PAC-5007-R 21.99 KIT
a b
28
Vintage Ford & Chevrolet Parts of Arizonawww.so-calspeedshopAZ.com
TURN SIGNAL SWITCH AND COLUMN MOUNTLimework’s own turn signal switch and combination switch and columnmount. Nice polished aluminum parts to dress-up any column. Will fit1 1/2” and 1 3/4” columns. Pictured on page 10.TURN SIGNAL SWITCH LIM-LW-TSSSWITCH AND MOUNT LIM-LW-TSSCM
TAILLIGHTS & PARTS
1950 PONTIAC TAIL LIGHTSBob Drake reproduction taillights modeled after the 50 Pontiac. Comescomplete with glass lenses, chrome rings, gaskets bulbs, and hardware.50 PONTIAC VIN-HR-13405 40.00EAWITH BLUE DOTS VIN-HR-73405BD 85.00 PR
TAILLIGHT ASSEMBLIESBright new taillights built by American Fiber Optics for your hot rod.With cast aluminum taillight buckets that have been powder coatedwhite, these are 30 percent brighter that the stock taillights. These alsohave side mounted bulbs. That allows for shorter buckets and more roomfor trunk or roll pan clearance. These have glass lenses with stainlesssteel trim rings, and are available with or with out blue dots. Gaskets andmounting hardware are included.39 TEARDROPS (a) AUT-072-39TL39 W/ BLUE DOTS (a) AUT-072-39TL-BD40 FORD (b) AUT-072-40TL40 W/BLUE DOTS (b) AUT-072-40TL-BD42-48 FORD (c) AUT-072-48TL42-48 W/BLUE DOTS (c) AUT-072-48TL-BD41-48 CHEVY (d) AUT-072-4148TL41-48 W/BLUE DOTS (d) AUT-072-4148TL-BD
REPRODUCTION FORD TAILLIGHTSMade to look just like the originals, these taillights include, bucket,socket, wiring, 12 volt light bulb, stainless trim ring and glass lens. Lefthand lights have the license plate lens in the bottom to illuminate theplate. Also available with blue dots pre-installed.28-31 LH LIGHT VIN-A-13405-DL 36.99 EA28-31 RH LIGHT VIN-A-13405-DR 36.99 EA32 LH LIGHT VIN-18-13403-DL 29.99 EA32 RH LIGHT VIN-18-13402-DR 29.99 EA33-34 LH LIGHT VIN-40-13403-DL 29.99 EA33-34 RH LIGHT VIN-40-13402-DR 29.99 EA35-36 LH LIGHT VIN-48-13403-DL 29.99 EA35-36 RH LIGHT VIN-48-13402-DR 29.99 EA37 LH LIGHT VIN-78-13403-DL 36.99 EA37 RH LIGHT VIN-78-13402-DR 36.99 EA38-39 “TEAR DROP” LIGHT VIN-81A-13405-D 29.99 EA40 LIGHT VIN-01A-13405-D 29.99 EA42-48 LIGHT VIN-21A-13405-D 28.99 EA
TAIL LAMP PADSRubber pads that mount between the taillight and fender.1939 TEARDROP DEN-81A-13420 8.99 PR1940 CHEVRON STYLE DEN-01A-13420 8.99 PR1942-48 DEN-21A-13420/1 8.99 PR
CHROME TAILLIGHT STANDSReproduction stand for mounting the original taillights to the fenders andframe. We also have the rubber pads available.28-31 RH STAND VIN-A-13470-C 15.99 EA28-31 LH STAND VIN-A-13471-C 15.99 EA32 RH STAND VIN-B-13470-C 45.99 EA32 LH STAND VIN-B-13471-C 45.99 EA33-34 RH STAND VIN-40-13470-C 45.99 EA33-34 LH STAND VIN-40-13471-C 45.99 EA
GLASS BLUE DOTSGlass “Blue Dots” mount into the taillight lenses with the includedchrome trim ring. Give your car an instant 50’s feel.BLUE DOTS VIN-BD-13450-G 8.00 PR
BRAKE LIGHT SWITCHPressure switch that screws into the back of the master cylinder foroperating the brake lights.BRAKE LIGHT SWITCH VIN-11A-13480 11.99 EA
THIRD BRAKE LIGHTBillet aluminum third brake light with 20 L.e.d.’s. This is bright andeasy to mount.THIRD BRAKE LIGHT VIN-BA-13613 45.99 EA
BRIGHT BULBS1156 and 1157 replacement bulbs. These are a halogen style bulb with asmall globe. These are made to fit the standard sockets and are muchbrighter than stock bulbs. 1157 is the standard taillight bulb.1156 SINGLE FILAMENT GEM-H-1156 8.99 EA1157 DUAL FILAMENT GEM-H-1157 9.99 EA
a
b c
d
This is a small representation of the partsand suppliers we carry.
If it’s not listed in the catalog give us a call!800-732-0076
STAINLESS LICENCE PLATE FRAMEThin polished stainless trim that surrounds the licence plate. Includeshardware. Made by Bob Drake.PLATE FRAME BOB-HR-13409 12.00 EA
LICENSE PLATE TUBE LIGHTThis tubular stainless steel license plate light bolts through standardlicense plate bolt holes.TUBE LIGHT SOC-099-HR-13550-SS 24.99 EA
LICENSE PLATE HANGER AND LIGHT50’s style license plate hanger and light assembly. Great nostalgia partmade by Bob Drake.LICENSE PLATE LIGHT BOB-HR-13550 41.99 EA
LIGHTED LICENCE PLATE BOLTSPair of stainless bolts with LED lights wired into them. Great forilluminating and mounting your plate with one simple item. Unpolishedor Polsihed stainless finish styles are available.UNPOLISHED MIS-030302 22.99 PRCHROME ACORN MIS-030310 26.99 PR
LICENSE PLATE FRAMESWe now have two “rough around the edges” die cast license plate frames.“Hot Rods” is a red background, “Customs” is a black background.HOT RODS FRAME SOC-90600 12.00 EACUSTOMS FRAME SOC-93049 12.00 EA
HOLLYWOOD LICENSE PLATE FRAMEMade from original tooling, these cast aluminum license plate frames addan authentic touch to any vehicle. Available polished or “as cast”.POLISHED FRAME SOC-90701 29.99 EACAST FRAME SOC-90700 19.99 EA
LICENSE PLATE FRAMESPolished aluminum frame for the modern license plates. These comecomplete with mounting hardware.LIGHTED FRAME ZOO-7006 72.99 EA
SO-CAL LICENSE PLATE SURROUNDThis cast aluminum license plate surround adds an authentic touch toany rod or custom. Sand cast in aluminum and polished to a high luster.It is contoured to fit a ‘32 Roadster, however, being aluminum they areeasily-shaped to fit many applications. Comes with hardware.PLATE SURROUND SOC-90704 49.99 EA
WIRING & ELECTRICAL PARTS
HAYWIRE WIRING KITComplete wiring harness and fuse box to wire your hot rod from headlights to tail lights and everything in between. Kits are available eitherin a 7 or a 14 fuse system. You get a complete GM color coded andlabeled wiring harness, headlight, dimmer, and ignition switches, allnecessary plugs and connectors, and a complete instruction book. Allfuse boxes have built in grounds and allow you to disconnect the wiringharness from the fuse box with a main disconnect plug.7 FUSE HAY-86 341.99 KIT14 FUSE HAY-85 399.99 KIT
E-SERIES WIRING KITThis is a 19 circuit fuse kit that includes all GM colored and pre-labeledwiring that is hard wired into the fuse box. This kit has no switches ordisconnect plugs. Kits wire headlight to taillight and everything inbetween.19 CIRCUIT KIT HAY-E-SERIES 299.99 KIT
HAYWIRE HOT ROD OR ROADSTER WIRING KIT(picture on next page)This kit from Haywire is a 7 fuse 9 circuit wiring system. Great forroadsters or simple hot rods that have just the basics. All wires are hardwired into the fuse panel and have eight foot leads. Makes it great formounting it under the seat, behind the firewall or in the truck. All wiresare GM color coated and labeled. This has seven fuses and two 12 gaugeleads that can be fused for extra components.ROADSTER WIRE KIT HAY-DPRO-T 159.99 KIT
30
Vintage Ford & Chevrolet Parts of Arizonawww.so-calspeedshopAZ.com
CENTECH FUSE PANELSo-Cal’s all about clean and simple, and this is the fuse box we’ve foundto be just that. Made by Centech Wiring, this compact (6” x 3 1/2”)panel offers 13 modern ATC fuses, 28 labeled circuits, 5 ground circuits,ground strip for fiberglass cars, horn relay, hazard flasher, turn flasher,stainless hardware, polished stainless cover, all mounting hardware,instructions, and a one year warranty.FUSE PANEL SOC-031-PDP-1B 129.99 EA
DASH GAUGE VOLTAGE DROPThese are what you need when converting a 6 volt car to a 12 voltsystem. They drop the current to 6 volts eliminating the possibility ofburnt up gauges. These are used on the fuel, temp, and oil pressure. Theamp or volt gauge does not require one.VOLTAGE DROP VIN-SR-10606 15.99 EA
FLEXIBLE CLOTH WIRE LOOMBlack cloth loom for running the wiring all around your car or truck.Sold in 25 foot rolls.1/4” I.D. LOOM VIN-A-14407-1/4 14.99 EA5/16” I.D. LOOM VIN-A-14407-5/16 14.99 EA7/16” I.D. LOOM VIN-A-14407-7/16 14.99 EA1/2” I.D. LOOM VIN-A-14007-1/2 14.99 EA
ART DECO ELECTRICAL SWITCHESThese quality dash switches feature our “Art Deco” knobs and matchingmounting bezels. Great for tying all your dash accessories together.KEY OPERATED IGNITION (a) SOC-60752 29.99 EATWO POSITION HEADLIGHT (b) SOC-60757 39.99 EAKEYLESS, PULL IGNITION (c) SOC-60753 24.99 EAGM HEADLIGHT SWITCH (d) SOC-60754 39.99 EATWO SPEED WIPER SWITCH (e) SOC-60750 29.99 EA
DASH INDICATOR LIGHTSGreen and red LED lights for the dash of any car or truck. Great forbrights, turn signal, or charging indicators. Small 5/32” push-in blackbezel lights.GREEN INDICATOR HAY-2018-GR 3.99 EARED INDICATOR HAY-2018-RD 3.99 EA
DOOR JAMB CONTACTSAdjustable brass contacts for the door jamb. These allow you toeliminate the wires between the body and door. Each kit includes 2strips, one for the door and one for the body. When the door is closed
they make contact with each other. Available in different multi-wirecontacts.2 WIRE CONTACT PAR-PPP-40022 31.50 KIT3 WIRE CONTACT PAR-PPP-40023 37.99 KIT4 WIRE CONTACT PAR-PPP-40024 49.99 KIT
HORNSimple, clean, easy to mount, and chrome. What more can we say?Good sounding hot rod horn.SO-CAL HORN SOC-JPL-18132 24.95 EA
POWER WINDOW KITSComplete kit for placing power windows in you hot rod. These kitsinclude the power lift motors, new channels for the glass, lift track,wiring, switches, and instructions.POWER WINDOW KIT BAL-PWKB-1 299.99 KIT
4 CHANNEL REMOTEThis kit includes the control box with wiring, fuses, breakers, and 2 fourbutton key chain remote pads. Perfect for remote doors, trunk, orwindows. Works great with Shaved Door Handle Kit below.4 CHANNEL KIT HAY-REM40 159.99 KIT
SHAVED DOOR HANDLE KITComplete kit for eliminating the outside door handles. Kit includes bearclaw door latches with mounting plates, striker bolts with mountingplates and cage nuts, and remote battery jump posts. Above 4 ChannelRemote kit works great with these.UNIVERSAL KIT HAY-SHAVED-DOOR 109.99 KIT
AFTERMARKET FRAMES, BODIES,PARTS & PATCHES
A-V8 & 32 FORD STEP BOXED FRAMESSo-Cal’s experience and engineering knowhow has gone into developingone of the strongest, best fitting, and best looking frames out on themarket today. These frames are jig-built with all the mounts andcrossmembers precisely placed for ease of installation. Base framesinclude: all crossmembers, steering box mount, front brake line tabs,brake pedal mount, brake proportioning valve mounting pad, engine &trans mounts, front panhard bar bracket, radius rod rear tabs, mastercylinder bracket, and in-line fuel filter mounting pad. These are completeand ready to bolt together, no grinding or welding needed. Please call formore info and options available. A-V8 Frame is designed to mount a 28-
29 Model A body on 32 frame rails, 32 frame is for all 1932 Ford bodystyles. Ask about our Model A Frame for the 1928-1931 Hot Rods.A-V8 BASE FRAME SOC-70710 3499.00 EA32 BASE FRAME SOC-70100 2995.00 EA
REPRODUCTION STEEL BODIESBrookville Roadster’s steel reproduction bodies. These are made tooriginal specs. We have just a few listed, but there are others available.There are many different options to choose from on each body. Give usa call and we’ll be glad to help you.28-29 ROADSTER ANT-AF-100-A 6,300.00 EA28-29 ROADSTER PU ANT-AT-100-A 4,300.00 EA30-31 ROADSTER ANT-AF-100-B 6,300.00 EA30-31 ROADSTER PU ANT-AF-100-B 4,300.00 EA32 ROADSTER ANT-B-100 10,500.00 EA
1932 FORD FIBERGLASS ROADSTER BODYWescott’s fiberglass ‘32 roadster body is built with an internal steelstructure for strength, support, and safety in the doors, cowl, and rearbody. This helps insure a good fit and solid construction. There aremany options on these bodies, so give us a call and we’ll be glad toassist you.1932 FORD ROADSTER CALL FOR PRICES
We are a Wescott’s dealer, so we can get you fenders, boards and morefor your project. They manufacture fiberglass parts for 1928-48 Fordcars and trucks. Their parts are high quality and fit exceptionally well.Good parts from a good company. Give us a call for prices andavailability.
1932 FORD STEEL FIREWALLNew steel firewall designed to look and fit just like the original 1932Ford. Exceptional piece with great detail and fit.32 STEEL FIREWALL MIS-32-FIREWALL 795.00 EA
32 FORD REPRODUCTION FIREWALLNew stamped steel flat firewall by Brookville Roadster with the stocklook. This is for use with Brookville’s aluminum mounting feet.32 FIREWALL ANT-B-1015 479.99 EA
AFTER MARKET FIREWALLS & FLOOR BOARDSDirect sheet metal offers a variety of firewalls and floors for Fords,Chevys, and more. Firewalls are built for small or big block applications
with either 3” or 5” set backs. Floors are made to go along with thesefirewalls. Please call for your application and prices.FIREWALLS STARTING AT 219.99 EAFLOOR BOARDS STARTING AT 199.99 EA
COWL PATCH PANELSThe 28-29 cowl patches extend from the bottom of the gas tank to thebottom of the car. The 30-31s cover just the lower 6 inches of the cowl.28-29 ANT-A-114-A 120.00 PR30-31 CAR-AM-725 39.99 EA
QUARTER PATCH PANELSThese patches are for the section just behind the door in front of the rearwheel wells.28-29 COUPE CAR-AM-710 48.99 PR30-31 COUPE CAR-AM-701 47.99 PR
32 ROADSTER PATCH PANELSSteel patch panels for the 32 Ford roadsters. All aprox 6” tall.COWL PATCH ANT-B-114 65.99 PR1/4 PATCH ANT-B-150 65.99 PRWHEEL WELLS ANT-B-181 139.99 PRBELOW DECK LID ANT-B-163 270.99 EA
33-34 STEEL REPAIR PANELSNew steel replacement panels for your 1933-34 Ford.TUDOR/3WC ROCKER RJE-RP-34-T 87.99 PR5 WINDOW COUPE RJE-RP-34-5 85.99 PRBELOW DECK LID RJE-BD-34 259.99 EATUDOR/3WC QUARTER RJE-QP-34-T 69.99 PR5WC QUARTER PATCH RJE-QP-34-5 69.99 PRCOWL PATCH PANEL RJE-CP-34 68.99 PRTUDOR/3WC RH LOW DOOR RJE-0DB34-3R 59.99 EATUDOR/3WC LH LOW DOOR RJE-0DB34-3L 59.99 EA
37-40 QUARTER PATCH PANELSGot rust? These new steel quarters will help you fix that.37-40 QUARTER PATCH MAC-78-35267 129.99 PR
FENDERS, RUNNING BOARDS &SPLASH APRONS
STEEL FRONT FENDERSNew steel front fenders for the 1932 Fords. These will work with all 32body styles.FRONT FENDERS FUN-B-16005/6 995.00 PR
STEEL REAR FENDERS (pictured on next pg.)Steel rear fenders for the 1932 Fords. Made by Brookville Roadster.COUPE & ROADSTER ANT-B-183-L/R 1,099.99 PRSEDAN FUN-B-16160-SEDAN 995.00 PR
32
Vintage Ford & Chevrolet Parts of Arizonawww.so-calspeedshopAZ.com
FENDER WELTBlack grained vinyl welt with a 3/16” bead. Used for fenders, runningboards, splash aprons, or for any body seam that requires a finishedlook. 25 foot roll.FENDER WELT VIN-B-16070-A 12.99 ROLL
RUBBER COVERED RUNNING BOARDSWhy try to re-cover you old running boards when you can purchase themall new ready to go. Vulcanized rubber covered steel running boards forthe early Ford passenger cars. These are made to look and fit just likethe originals.1932 FORD BOARDS BOB-B-16450/1 525.001933-34 FORD BOARDS BOB-40-1650/1 750.00
STEEL “SMOOTH” RUNNING BOARDSThese are all steel and built just like the original, with the fit andfunction of the originals. These boards are great for that smooth customlook, ready for fit and paint to match your hot rods exterior.1932 FORD ANT-B-185-SM 219.99 PR1933-34 FORD V8S-1268-C 429.99 PR1935-56 FORD V8S-1268-E 429.99 PR1937 FORD V8S-1268-F 429.99 PR1939-40 FORD V8S-1268-G 429.99 PR
MODEL A RUNNING BOARDSNew steel boards with rubber matting and stainless trim. 1930 Model Aincludes splash aprons.28-29 CAR-AM-200-B 199.99 PR30 CAR-AM-204-A 269.99 PR31 CAR-AM-201-B 189.99 PR
MODEL A RUNNING BOARD SPLASH APRONSSteel aprons that fit between the body and the running boards and hidethe frame rails.28-29 CAR-AM-152-153 189.99 PR
30-31 WITH 32 GRILL RADIATOR SPLASH APRONThis is the apron you need if your using a 32 grill shell on your 30-31Model A. This will bolt up to the 30-31 frame rails and is contoured tofit the shape of the 32 grill shell.30-31/32 APRON ANT-A-115-B32 89.99 EA
1932 FRONT SPLASH APRONSSteel apron that mounts under the grill shell and finishes the open framerails, We have either stock or 2 inch chopped available.1932 APRON VIN-B-16527 39.99 EA1932 2” CHOPPED APRON VIN-B-16527-CHP 35.99 EA
HOODS & RELATED
HOODSReproduction steel hoods for the early Fords. These are available eitherstock or hot rod style. Call for custom and hot rod hood options andprices. (Stock 32 hood pictured above)28-29 STOCK MODEL A ROO-402 459.99 EA30-31 STOCK MODEL A ROO-450 459.99 EA32 STOCK HOOD ROO-500 548.99 EA32 4PC HOT ROD HOOD ROO-RT-506 559.99 EA
HOOD CENTER STAINLESS HINGEPolished stainless strip that runs down the length of the hood and joinsthe halves together.32 HOOD HINGE VIN-18-16632 20.00 EA33-36 HOOD HINGE VIN-40-16632 20.00 EA
HOOD HINGE BRACKETSChrome brackets that bolt to the grill shell and firewall. The hood hingeslips over these.32-35 GRILL SHELL BRKT VIN-B-8220 10.99 EA32 FIREWALL BRACKET VIN-B-8221 16.99 EA33-36 FIREWALL BRKT VIN-B-8220 10.99 EA
1932 HOOD LATCHESStainless spring loaded latches that hold the sides of the hood in place.32 HOOD LATCH VIN-B-16750-SS 18.99 EA32 HOOD LATCH SCREWS VIN-B-16750-SK 9.00 SET
HOOD PROP KITStainless kit that mounts to the radiator support rods and supports thehood sides when opened. Keep the corners of the hood from scratchingup the paint. Includes stainless mounting hardware and two sets of armsfor different hood sizes.HOOD PROP VIN-A-16613-SS 27.99 SET
1932 STAINLESS HOOD HANDLESThis is a pair of polished stainless handles that mount to the side of thehood. Made to fit and look just like the original. Includes hardware.HOOD HANDLES VIN-B-16609-SS 35.00 PR
HOOD BUMPER KITSRubber bumpers and cushions for the hoods of the early Fords.1932, 32-34 PU VIN-B-16761-S 10.00 SET1933-34 VIN-40-16761-S 10.00 SET1935, 35-37 PU VIN-48-16761-S 10.00 SET1936 VIN-68-16761-S 10.00 SET1937 VIN-78-16761-S 10.00 SET1938-39 PASS & PU VIN-81A-16761-S 10.00 SET1939 DLX, 40 STD & DLX VIN-91A-16761-S 10.00 SET1940-41 PU VIN-01C-16761-S 10.00 SET1941-48 VIN-11A-16761-S 10.00 SET
GRILLS, SHELLS, & COWLS
32 STEEL GRILL SHELLS1932 Reproduction grill shells.STOCK W/CAP ANT-B-1620-STOCKSTOCK W/HOLE, NO CAP VIN-B-8200-OGS 299.99 EAFILLED SHELL ANT-B-1620FILLED SHELL VIN-B8200-HRS 299.99 EA
1932 STAINLESS STEEL GRILL INSERTSStainless inserts for the original or aftermarket 32 Ford grill shell. Thesehave the polished outer rim with polished vortical bars. Available withor without the stock crank hole opening.STOCK W/CRANK HOLE DAL-B-8200-IC 379.99 EAW/O CRANK HOLE DAL-B-8200-ID 379.99 EA
SO-CAL BULLNOSEInvestment cast in stainless steel and polished to a quality shine, thispiece trims out the grill shell of any 32 Ford to perfection. This replacesthe original radiator cap ornament when you have a filled or smoothshell, while allowing use of the Blue Ford script emblem.SO-CAL BULLNOSE SOC-60200 49.99 EA
FORD GRILL EMBLEM/BULL NOSE INSERTBlue porcelain emblem from Bob Drake with “FORD” script thatcompletes the original or So-Cal grill shell ornament.BLUE EMBLEM BOB-B-8212 30.00 EA
FORD GRILLSChrome grills made just like the original. 34 grill is stamped steel andbeautifully chrome plated, 40 Deluxe grill has die-cast chrome platedsides with chrome die-cast center strip and stainless crank hole cover.The 40 standards come with a chrome center and paintable sides or allchrome.1934 FORD GRILL BOB-40-8200 2,450.00 EA40 FORD STD GRILL BOB-01A-8206/7-AK 629.99 EA40 FORD STD ALL CHROME BOB-01A-8206/7-ACK 699.99 EA40 FORD DELUXE GRILL VIN-01A-8206/7-DC 419.99 EA
RADIATOR SUPPORT RODS (pictured on pg. 24)Polished stainless rods that run from the firewall to the radiator and holdit in place.28-31 FORD VIN-A-8133-SS 40.99 PR32-39 FORD VIN-B-8133-SS 27.99 PR
SUPPORT ROD BRACKETS (pictured on pg. 24)Polished stainless brackets that mount to the firewall and hold thesupport rods.28-32 CAR 32-34 TRUCK VIN-B-8140/41-SS 11.99 PR33-39 CAR VIN-40-8140/41-SS 18.99 PR
SHELL AND COWL LACINGPre-cut material on the grill shell and firewall (cowl) that cushions thehood as it is closed. Also needed to keep the hood in alignment.28-29 SHELL LACE VIN-A-16739-AS 9.99 EA30-31 SHELL LACE VIN-A-16739-BS 10.99 EA32 SHELL LACE VIN-B-16739-S 10.99 EA33-34 SHELL LACE VIN-40-16739-S 14.99 EA35 SHELL LACE VIN-48-16739-S 10.99 EA36 SHELL LACE VIN-68-16739-S 8.99 EAHOT ROD SHELL LACE VIN-HR-16739 8.99 EA28-29 COWL LACE VIN-A-16740-AS 10.99 EA30-31 COWL LACE VIN-A-16740-BS 13.99 EA32 COWL LACE VIN-B-16740-S 13.99 EA32 COWL TO FIREWALL VIN-B-35336 15.00 EA33-34 COWL LACE VIN-40-16740-S 12.99 EA35 COWL LACE VIN-48-16740-S 12.99 EA36 COWL LACE VIN-68-16740-S 12.99 EA37-40 COWL LACE VIN-78-16740-S 8.99 EA41-48 COWL LACE VIN-11A-16740-S 8.99 EAHOT ROD COWL LACE VIN-HR-16740 9.99 EA
34
Vintage Ford & Chevrolet Parts of Arizonawww.so-calspeedshopAZ.com
1932 FORD ROADSTER 2” CHOP WINDSHIELD KITThis is a complete windshield kit for the 32 Fords. It includes a chrome2” chopped windshield frame with 2” chopped stainless upperstanchions, chrome lower stanchions, wing nuts, cones , studs andrubber seal. This is everything you need, with the exception of the glass.32 2” CHOPPED W/S KIT VIN-32-WS-KIT CALL
1932 ROADSTER WINDSHIELD FRAME 2” CHOPReproduction chrome windshield frame for the 1932 Ford roadsters. Ithas a two inch chop for that nostalgia hot rod look. These are the niceones with smooth surfaces, no ripples in the steel.32 2” Chopped Windshield NCI-61D-2IN-CHROME 499.99 EA
1932 FORD ROADSTER WINDSHIELD PARTSChrome and stainless hardware for mounting the stock style or 2 inchchopped windshield to the 1932 Ford roadsters.LOWER STANCHIONS VIN-B-37132-S 79.99 PRSTOCK UPPER POSTS VIN-18-37136-SS 129.99 PR2” CHOPPED UPPER POSTS VIN-18-37136-CHP 159.99 PRFRAME CONES (NEED 2) VIN-18-37154 6.99 EAFRAME PULLS VIN-18-37118-S 12.99 PRWINDSHIELD SEAL VIN-A-37199-BS 6.99 EAWING NUTS (NEED 4) VIN-A-351000 4.50 EA
SID CHAVER’S BOP-TOPLooking for the perfect top to complete your rod? Sid’s got it! This top ismade to attach to the windshield and the two stock tabs in the top of therear quarters. It folds up and stows in the trunk. The rear of the top“floats” above the body, so you don’t have to worry about scuffs orscratches. Designed to work with the three popular windshields, either,2” chop stock, DuVall, and, yes, So-Cal. Many colors are available, giveus a call for more info.2” CHOP FRAME SID-BT001 2,495.00 EADUVALL FRAME SID-BT002 2,495.00 EASO-CAL FRAME SID-BT003 2,495.00 EA
WINDSHIELD WIPER MOTORS &PARTS
ELECTRIC WIPER MOTOR CONVERSION KITTired of that slow moving vacuum wiper? Replace it with a new 12 volt,2 speed unit with automatic park. Includes motor with mountingbracket, wiring, 2 speed switch, hardware, and instructions.40 FORD PASS CAR VIN-01A-17508-HD12 159.99 KIT41-42 FORD PASS CAR VIN-11A-17508-HD12 159.99 KIT46-48 FORD PASS CAR VIN-51A-17508-HD12 159.99 KIT
COWL VENT SEALFor those of you still using the cowl vent in front of the windshield, thisis the seal to help keep it leak proof.32 PASS CAR VIN-B-700616 15.99 EA33-34 PASS CAR VIN-40-700616 15.99 EA35-36 PASS CAR VIN-48-700616 15.00 EA37-48 PASS CAR VIN-78-700616 15.00 EA
TRUNK AREA
TRUNK SUPPORT SHOULDER BOLTSpecial bolt that the trunk support arm pivots on. Fits Model A and 32Fords.SHOULDER BOLT ANT-SHOULDER-BOLT 4.99 EA
TRUNK PROPTelescoping prop rod to aid in holding the trunk lid open.TRUNK PROP PAR-PRR-2254 75.99 EA
DECK AND RUMBLE LID BUMPERSRound rubber bumper for your trunk or rumble lid.1928-34 LID BUMPERS VIN-B-41518 2.99 EA
LOCKING DECK LID HANDLEThis chrome locking handle is used on the rumble or deck lid of theearly Fords. Includes 2 keys.32-34 DECK HANDLE VIN-40-702352 34.99 EA28-34 RUBBER MOUNT PAD VIN-A-702356-E 2.50 EA
WINDSHIELDS, TOPS & RELATED
SO-CAL WINDSHIELD FRAMESo-Cal cast brass, two piece frame designed for the 1932 Roadster withthe stock style cowl and windshield dam. This frame has a cool chopwith a 32 degree rake for that classic hot rod look. Due to differences inbody manufacturing, some fitting will be required. Comes withinstructions and mounting hardware. Frame is brass finish, glass notincluded.SO-CAL WINDSHIELD SOC-60420 1299.99 EA
PEEP MIRRORSStainless 3 or 4 inch mirror head with a chrome mounting bracket thatattaches to the edge of the door. There are two types of mountingbrackets available, either curved arm for tight fit, or straight arm forwider cars.3” CURVED ARM MIRROR PAC-C-5001-1 29.99 EA4” CURVED ARM MIRROR PAC-C-5001 29.99 EASTRAIGHT ARM MIRROR PAC-A-4008 29.99 EA
OPEN CAR WINDSHIELD POST MIRRORSThese are the outside mirrors that screw into the upper windshield postsof the roadsters and phaeton. Nice chrome arm with 4 inch roundstainless mirror head. These are made just like the original.28-29 MIRROR VIN-AR-17700-P 40.99 EA30-31 MIRROR (a) VIN-B-17700-P 40.99 EA32 MIRROR (b) VIN-18-17700-P 40.99 EA
OUTSIDE REAR VIEW MIRRORThese are the mirrors that mount to the door hinge of the 1935-40 Fordpassenger cars. These include a new stainless hinge pin and set screwsfor holding the mirror on the hinge.1935-40 MIRROR (c) VIN-68-17741-R 39.99 EA
INSIDE REAR VIEW MIRRORSStainless oval mirror head with appropriate brackets to fit in the olderFords and hot rods. These are made to bolt-up like the original but havea clean hot rod look. The glue on mirror has a stainless post that glues tothe glass. Universal mirror uses a bracket that screws to the face of thewindshield header.1932 OPEN CAR (a) VIN-B-17681-SR 45.99 EA1933-34 OPEN CAR (f) VIN-40-17681-SR 46.99 EA1932-36 CLOSED CAR (d) VIN-B-17682-SR 45.99 EA1937-39 CLOSED CAR VIN-78-17682-SS 56.99 EA1940 CLOSED CAR (c) VIN-01A-17682-SS 55.99 EA1941-48 CLOSED CAR VIN-11A-17682-SS 41.99 EAGLUE ON POST(e) VIN-SR-17682 40.99 EAUNIVERSAL MIRROR (b) VIN-48-17690-SR 65.00 EA
MIGHTY WIPERTwelve volt wiper systems that include the motor, wiring lead, and wiperarm and blade. These compact wipers measure only 1 1/2” deep, 2” tall ,and 4” wide. The shaft for the arm is available in 1/2” increments from1/2” to 3” long. You can also order this with a 1/4” end for a clamp onwiper arm or a tapered end with a chrome screw (37-40 Ford style) forholding the arm on. Please call for your application.MIGHTY WIPER STARTING AT 169.99KIT
WIPER ARMS & BLADESStainless arms and blades for the old Ford and hot rod wiper systems.There are many styles available, along with original and new style wiperblades. Give us a call and we’ll hook you up.WIPER ARMS STARTING AT 13.99 EAWIPER BLADES STARTING AT 5.99 EAUNIVERSAL ARMS STARTING AT 13.99 EAUNIVERSAL BLADE STARTING AT 5.99 EA
UNIVERSAL 12 VOLT WIPER MOTORSmall, compact, single speed wiper motor for cars and trucks. These aregreat for getting a car through inspection. It is designed for a single armand blade system. Stainless wiper has a polished stainless body.WIPER MOTOR PAC-A-6226 29.99 EASTAINLESS MOTOR PAC-A-6236 49.99 EA
UNIVERSAL 6 VOLT ELECTRIC WIPER MOTORCompact design motor for the windshield wiper system. This is 6 voltand has the on/off switch built onto it. Mounts using the wiper arm postand a single mounting tab. Accepts 1/4” wiper arm, has self park, andhas a 110 degree sweep.6 VOLT WIPER VIN-A-17508-E6 40.00 EA
MIRRORS
SWAN NECK MIRRORSChrome die cast arm with teardrop shaped mounting base. Includes 4”stainless mirror head with trick “bullet” nut. Mirrors include mountinggasket and hardware.PAIR OF SWAN NECKS SOC-50100 99.99 PRRIGHT HAND SWAN NECK SOC-50101 55.00 EALEFT HAND SWAN NECK SOC-50102 55.00 EA
a
b
c
cba
d e f
36
Vintage Ford & Chevrolet Parts of Arizonawww.so-calspeedshopAZ.com
GLUE-ON INSIDE REAR VIEW MIRRORChrome oval head mirror with a glue-on base. Base has an arm on it thatwill pivot to just about and position.MIRROR MOO-GT887 59.99 EA
BUMPERS, BRACKETS &SPREADER BARS
CHROME BUMPERSNew chrome bumpers for the early Ford passenger cars. These are notrechromed, they are new, and they are nice. Some fronts and rears sharethe same bumpers. Stainless are available, please call.32 FRONT OR REAR MET-008 319.99 EA33 FRONT OR REAR MET-003 319.99 EA34 FRONT OR REAR MET-011 319.99 EA35 FRONT OR REAR MET-114 319.99 EA36 FRONT OR REAR MET-016 319.99 EA37 FRONT MET-018 319.99 EA37 REAR MET-019 319.99 EA38 FRONT OR REAR MET-020 319.99 EA39 STD FRONT OR REAR MET-020 319.99 EA39 DLX FRONT OR REAR MET-022 319.99 EA40 FRONT OR REAR MET-023 319.99 EA
FRONT BUMPER BRACESBrackets for mounting the front bumpers to the Ford passenger cars.28-29 MET-026 59.99 PR30-31 MET-030 59.99 PR32 MET-031 59.99 PR33 MET-033 102.99 PR34 MET-035 102.99 PR35 MET-038 99.99 PR36 MET-040 102.99 PR37 MET-043 102.99 PR38 MET-046 102.99 PR39 STANDARD MET-046 102.99 PR39 DELUXE MET-048 102.99 PR40 MET-051 102.99 PR
REAR BUMPER BRACESBrackets for mounting the rear bumpers to the Ford passenger cars.28-31 VIN-A-17785-R 139.99 PR32 MET-032 55.99 PR33 MET-034 55.99 PR34 MET-036 55.99 PR35-36 MET-041 55.99 PR37 MET-044 102.99 PR39 DELUXE MET-049 102.99 PR40 MET-052 102.99 PR
1932 SHORTIE REAR BUMPER BRACESThese chrome braces move the rear bumper up closer to the back of thecar for a nice clean look.32 SHORTIES VIN-CHP-17821/2-E 169.99 PR
STAINLESS BUMPER BOLTSThese bolts are made to look and fit just like the original Ford bumperbolts.1932 BOLTS (a) VIN-B-17758 12.99 EA1932 BUMPER END PLUGS (b) VIN-B-17760-SS 4.99 EA1933-34 OUTER BOLTS VIN-18-17758 7.00 EA1933-40 “OVAL” BOLTS (d) VIN-48-17758 6.99 EA1942-48 BOLTS (c) VIN-11A-17758-SS 10.00 EA
STAINLESS V-SHAPED SPREADER BAR (pictured below)Polished stainless steel spreader bar. The stock spreader was juststraight, this V’s out toward the front for that hot rod look. Measureyour frame to check if its stock or pinched.STOCK FRAME SOC-61202 155.99 EAPINCHED FRAME SOC-61203 155.99 EA
STRAIGHT FRONT SPREADER BARPolished stainless steel bar with hardware for the front of the 1932Fords. Highly polished.32 FRONT BAR VIN-B-5041-SS 65.00 EA
REAR SPREADER BARPolished stainless bar for protecting the gas tank at the rear of the 32Ford. Comes complete with mounting hardware.1932 REAR SPREADER VIN-B-18575-SB 95.99 EA
INTERIOR PARTS
COUPE & ROADSTER SEAT FRAMESThese are built with a steel frame and non-sag seat spring for a comfort-able ride in your early hot rod. Many more styles and options areavailable, please call for more info. Prices are “starting at” prices.28-34 WITH ADJUSTABLE BACK 459.99 EA28-32 WITH FIXED BACK 419.99EA31-34 BUCKET ROADSTER SEATS 579.99 PR35-49 SQUARE SPLIT BACK 609.99 EA55-57 SPLIT BACK SEAT 635.99 EA28-47 FORD PICK-UP SEAT 459.00 EA
SEAT FOAM KITSThese foam kits are for the above Glide seats. Many are available, pleasecall for more info. Prices are “starting at” prices.28-34 CONTOURED FOAM 145.99 EA31-34 BUCKET CONTOURED FOAM 149.99 PR28-66 PICK-UP CONTOURED FOAM 145.99 EA
SO-CAL/GLIDE ENGINEERING SEATThis is it! Glide and So-Cal have put their heads together and created aseat that does it all. The bottom cushion lifts up for storage underneath,the back reclines forward and back for comfort and storage, the seatslides forward and back 7” for tall or short hot rodders, and the top backedge of the seat fits under the rear panel so you can push the seat back,slide down in your seat, and hold on.ADJUSTABLE SEAT SOC-006-60500 450.00 EAADJ SEAT W/ARM REST SOC-006-65000-CA 495.00 EASEAT FOAM GLI-F-213 139.99 EA
SEAT BELTS (NON-RETRACTABLE)New seat belts for your hot rod car or truck. These lap belts come in twostyles: one with a GM type push button release, the other with a chromelift-up release. These are 74 inches long and have mounting tabs oneach belt. If you don’t see the color you need feel free to call for moreoptions.GM BLACK (a) AMS-74-02 20.99 EAGM SILVER (a) AMS-74-12 20.99 EAGM ANTELOPE (TAN) (a) AMS-74-21 20.99 EACHROME BLACK (b) AMS-74LL-02 34.99 EACHROME SILVER (b) AMS-74LL-12 34.99 EACHROME ANTELOPE (b) AMS-74LL-21 34.99 EACHROME FIRE RED (b) AMS-74LL-20 34.99 EACHROME NIGHT BLUE (b) AMS-74LLP-18 34.99 EACHROME BURGUNDY (b) AMS-74LL-04 34.99 EA
SEAT BELT RETRACTORSWind-up black plastic retainers that the belt feeds through. These re-coiland take the extra slack out of the belts when they’re not being used.RETRACTOR GEM-058-RET 9.99 EA
SEAT BELTS TWO POINT RETRACTABLEGM Style with push button release. Outside belt has built in retractor.Available in same colors as listed above, state color when ordering.GM TWO POINT BELT (c) AMS-I-2000-COLOR 31.99 EA
SEAT BELTS THREE POINT RETRACTABLEThis is the shoulder belt style. They have a retractor on the outsidelower mount, a triangle mount over the shoulder, and a GM style buckleon the inside belt. The hard buckle sets have a stiff plastic cover overthem to keep the belt where you want it.BLACK HARD BUCKLE AMS-I-3206-02 73.99 EABLACK SOFT BUCKLE AMS-WELR-RRR-02 73.99 EA
GRAY HARD BUCKLE AMS-I-3206-12 73.99 EAGRAY SOFT BUCKLE AMS-WELR-RRR-12 73.99 EAANTELOPE HARD BUCKLE AMS-I-3206-21 73.99 EAANTELOPE SOFT BUCKLE AMS-WELR-RRR-21 73.99 EA
SEAT BELT ANCHOR PLATES AND HARDWAREUsed for mounting belts in cars that never had them before. Kitsincludes, 2 plates, 2 bolts, and four nuts. One kit does one seat belt pair.ANCHOR PLATES HOF-SBHP 16.99 KIT
INSULATORS FOR STOCK FIREWALLSABS Plastic firewall covers with 3/4 inch jute padding bonded to themto offer a quiet and cool ride. These pads have all original mountingholes and are punched out just like the original for the heater, wiper,speedo cable, and every thing else that passes through the firewall. Youcan order the pads with out any holes if you prefer. (please specify)28-29 PASS & PU COX-FORD-2829-CT 139.99 EA30-31 PASS & PU COX-FORD-3031-CT 139.99 EA32 PASS & PU COX-FORD-3208-CT 241.99 EA33-34 PASS COX-FORD-3334-C 241.99 EA35-36 PASS COX-FORD-3536-C 241.99 EA37-38 39 STD PASS COX-FORD-3739-STD-C 241.99 EA39 DLX PASS COX-FORD-3908-DLX-C 241.99 EA40 PASS COX-FORD-4008-C 241.99 EA33-34 PICK UP COX-FORD-3334-T 241.99 EA35-36 PICK UP COX-FORD-3536-T 241.99 EA37-39 PICK UP COX-FORD-3739-T 241.99 EA40-47 PICK UP COX-FORD-4047-T 241.99 EAThese can also be ordered for other cars and trucks and aftermar-
ket firewalls such as Bitchen Products or Direct Sheetmetal.Let us know what type you have and we will be glad to help you!
INSULATIONFoil backed double, jute pad insulation for the firewall, floors, doors, andmore. This comes in a 4’ by 6’ roll and it 3/8” thick. We also have thespray adhesive (16oz Can) to help hold it in place.INSULATION VIN-HR-700720 34.99 ROLLADHESIVE MTW-PA-2001
a
bc
38
Vintage Ford & Chevrolet Parts of Arizonawww.so-calspeedshopAZ.com
CLASSIC INSTRUMENT OPTIONAL GAUGE SETSSPEEDO/TACH/4 SMALL CLI-SET-01 649.99 SETSPEEDO/QUAD CLI-SET-02 519.99 SETSPEEDO/TACH/QUAD CLI-SET-03 589.99 SETSPEEDO/ 2 DUALS CLI-SET-04 549.99 SETSPEEDO/TACH/2 DUALS CLI-SET-05 649.99 SET5IN SPEEDO/QUAD CLI-SET-52 619.99 SET5IN SPEEDO/TACH/QUAD CLI-SET-53 739.99 SETClassic instruments offers a wide selection of gauges. Other thanwhat’s listed below. They offer the standard 3 3/8 speedo with 2inch gauges, and 5 inch speedo with 5 inch quad gauges. Pleasecall if you have any questions or if you’re looking for a different
style than what is listed above.
SO-CAL INSTRUMENTSFive gauge set includes mechanical 3-3/8” 120 mph speedometer,electric volt, fuel, temp, and oil with senders. Auxillary gauges are all 2 1/16-in, diameter but are reffered to as 2-in. Black faces with a small SO-CAL logo.5 GAUGE SET SOC-62500 329.99 SETSPEEDOMETER (MECH) SOC-62501 129.99 SETOIL PRESSURE (ELEC) SOC-62502 69.99 EAWATER TEMP. (ELEC) SOC-62503 59.99 EAVOLT (ELEC) SOC-62504 39.95 EATACHOMETER (ELEC) SOC-62505 149.99 EA
DASH OR COLUMN MOUNT TACH CUPChrome mounting cup with bracket to attach it to the dash or steeringcolumn and hold a 3 3/8 tach.TACH CUP MOO-MPG205-5 37.99 EA
GAS TANK SENDING UNIT ADAPTERAdapter plate that converts the six hole flange on the older Ford gastanks to the modern five hole sending units. Works with Moon, Vdo,Classic Instruments, and more.SENDING UNIT ADAPTER ROC-119-2915 44.99 EA
LIQUID FILLED GAUGESThese gauges are made for any motor. They are a direct mount, meaningthey screw right into you intake, head, water neck, and so on. There aredifferent sizes and calibrations, so measure to see what will fit.2 1/2 INCH TEMP GAUGE MOO-MPG109-LF 52.99 EA1 1/2 INCH TEMP GAUGE MOO-MPG1095-LF 53.99 EA0-15 PSI FUEL GAUGE MOO-MPG110-LF 35.00 EA0-60 PSI FUEL GAUGE MOO-MPG115-LF 41.99 EA0-100 PSI FUEL GAUGE MOO-MPG120LF 41.99 EA
STAINLESS STEEL DOOR SILL PLATESStainless trim under the door on the body.32 ROADSTER ANT-B-138-1 49.99 PR32 3 WINDOW ANT-B-238-1 59.99 PR32 CP/TUDOR VIN-B-701338-1 49.99 PR
RUBBER FLOOR MATSReplacement floor mats for the early Ford Cars and Trucks. Black andtaupe (Tan) Mats are available.
35 BLACK DAL-48-700400-B 119.99 EA35-37 PU BLACK DAL-50-700400 119.99 EA36 BLACK DAL-68-700400-B 139.99 EA37-39 BLACK DAL-78-700400-B 139.99 EA40 BLACK DAL-01A-700400-B 139.99 EA41-48 BLACK DAL-11A-700400-B 139.99 EA
DASH PANELS, GAUGES & RELATED
32 ROADSTER STYLE DASHSteel dashes made by Brookville Roadster for Model A’s and 1932Fords that have the 32 style design. Bolts into your existing dash area.28-29 OPEN CAR ANT-A-136-F 149.99 EA28-29 CLOSED CAR ANT-A-136-AF-CC 149.99 EA30-31 OPEN CAR ANT-A-136-BF 149.99 EA30-31 CLOSED CAR ANT-A-136-BF-CC 149.99 EA32 OPEN CAR ANT-B-139 249.99 EA
INSTRUMENT PANELSTruly a traditional style, hot rod dash. These aluminum inserts are sandcast, then polished, and topped with a clear or black engine-turnedaluminum insert. These are available as a five hole (one 3 3/8”, four 2 1/16” gauges) or as a six hole (two 3 3/8”, four 2 1/16” gauges).Instructions, template, and mounting hardware included.5 GAUGE CLEAR SOC-60700 225.00 EA5 GAUGE BLACK SOC-60700B 225.00 EA6 GAUGE CLEAR SOC-60710 230.00 EA6 GAUGE BLACK SOC-60710B 230.00 EA
CLASSIC INSTRUMENTS 5 GAUGE SETSThese sets include a 3 3/8 speedo and four 2 1/8 small gauges. Setsinclude all electric gauges and speedo with all sending units andhardware. Please specify what motor and tranny you’re using.PETE & JAKE SERIES CLI-SET-00-PJ 549.99 SETVINTAGE SERIES CLI-SET-00-VT 549.99 SETBOYDS SERIES CLI-SET-00-BD 549.99 SETTRADITIONAL SERIES CLI-SET-00-TR 549.99 SETCLASSIC SERIES CLI-SET-00-CW 549.99 SETHOT ROD SERIES CLI-SET-00-HR 549.99 SET
DASH KNOBSBring the car together with these aluminum knobs. Check out our otherSo-Cal items for more cool matching “Art Deco” accessories. We alsooffer matching polished and black switch nuts or bezels seperatly. Pleasecall for numbers and pricing.ART DECO SOC-50405 9.99 EAART DECO BLACK SOC-62118 9.99 EASPEED KNOB SOC-50400 9.99 EAFORTY KNOB SOC-50425 9.99 EAFORTY BLACK SOC-62074 9.99 EASHOE BOX SOC-50440 9.99 EABULLET SOC-50433 10.99 EA
ART DECO ELECTRICAL SWITCHES (Pictured on pg. 30)These quality dash switches feature our “Art Deco” knobs and matchingmounting bezels. Great for tying all your dash accessories together. Wealso offer all the switches with the knobs listed above. Please call forpart numbers. Pricing is the same.TWO SPEED WIPER SWITCH SOC-60750 29.99 EAGM HEADLIGHT SWITCH SOC-60754 39.99 EAKEYLESS, PULL IGNITION SOC-60753 24.99 EAKEY OPERATED IGNITION SOC-60752 29.99 EA2 POSITION HEADLIGHT SOC-60757 39.99 EAPUSH HORN BUTTON SOC-60766 29.99 EA
DASH GAUGE VOLTAGE DROPThese are what you need when converting a 6 volt car to a 12 voltsystem. They drop the current to 6 volts eliminating the possibility ofburnt up gauges. These are used on the fuel, temp, and oil pressure.VOLTAGE DROP VIN-SR-10606 15.99 EA
RUBBER SEALS & GASKETS
WINDSHIELD SEALRubber gasket that holds the windshield in the body.1932 PASS DEN-B-7003110 21.99 EA1933-34,32 3-WINDOW DEN-40-7003110 21.99 EA1935-36 PASS DEN-48-7003110 21.99 EA1935-36 PU DEN-51-7003110 24.99 EA1937-39 PASS DEN-78-7003110 21.99 EA1940 PASS DEN-01A-7003110 79.99 EA1941-48 W/O CHROME DEN-11A-7003110-A 59.99 EA1941-48 WITH CHROME DEN-11A-7003110-B 65.99 EA
REAR WINDOW SEALRubber seals for the back glass.1937-40 COUPE DEN-78-7042084 24.99 PR1937-40 SEDAN DEN-81A-7042084 24.99 PR1940-47 PICK-UP DEN-01C-7042084 29.99 EA1941-48 W/O SS TRIM DEN-11A-7042084 29.99 EA1941-48 WITH SS TRIM DEN-19A-7042084 30.00 EA
UPPER DOOR SEALRubber on top of the door that seals it to the body.32 3-WINDOW 33-34 DEN-40-7020532 10.99 PR35-36 PASS DEN-48-7020532 12.00 PR37-48 PASS DEN-78-7020532 12.99 PR
LOWER DOOR SEALSSeals for the bottom of the door to the rocker panels.32-34 PASS DEN-B-7020706 8.99 EA35-36 PASS DEN-48-7020706 8.00 EA37 PASS DEN-78-7020706 8.99 EA37-47 PICK-UP DEN-91C-8120706 9.99 EA38-40 PASS DEN-01A-7020706 8.00 EA41-48 PASS DEN-11A-7020706 8.00 EA
DOOR HINGE SEALSeal that fills the gap on the door between the body and the door jambon the front edge of the door.35-36 PASS DEN-48-7020456-PR 21.99 PR37 PASS DEN-78-7020456-PR 29.99 PR38-40 PASS DEN-81A-7020456-PR 20.50 PR41-48 PASS DEN-11A-7020456/7 21.99 PR
VENT WINDOW SEALSRubbers that seal the vent window frame in the door.40 PASS VIN-01A-7021448/9 40.00 PR41-48 PASS VIN-11A-7021448-PR 44.00 PR
QUARTER WINDOW SEALSRubber seals that surround the side quarter windows. These are a onepiece bonded seal. They will not fit the flip-out windows.37-40 DEN-78-7029904 20.50 PR
UNIVERSAL DOOR SEAL“Hollow core design” self adhesive rubber seal for the doors or trunk ofthe hot rod. This stuff’s sold by the foot and is 1/2” x 1/2” thick.UNIVERSAL SEAL SOF-E1704 3.50 FT
OUTSIDE DOOR HANDLE PADSRubber pads under the exterior door handles.1932-34 CLOSED CAR VIN-B-702356-BS 3.99 PR1935-37 DEN-48-7022428 4.50 PR1938-39 DEN-81A-7022428 4.50 PR1940 DEN-99A-7022428 5.00 PR
UNIVERSAL HOLLOW CORE WEATHER STRIPUniversal seal that can be used on the doors, trunk, hood, or where everyou may need weather-stripping.UNIVERSAL SEAL BOB-FG-100-30 29.99 EA
WEATHER-STRIP ADHESIVE3M black colored high strength adhesive for adhering rubber weather-stripping to doors, windshields, trunk lids and lights.Five ounce tube.3M ADHESIVE VIN-M-500 8.99 EA
Order Today!800-732-0076
40
Vintage Ford & Chevrolet Parts of Arizonawww.so-calspeedshopAZ.com
DOOR & WINDOW PARTS
BEAR CLAW LATCHES AND MOUNTING KITSAftermarket door latches for use with stock handles or electric dooropening kits. These are double latch for safety and include the strikerbolts. The mounting kits are designed to weld into your door and thebear claw latches bolt up to them.LATCHES (a) GEM-902-PR 49.99 PRMOUNTING KIT (b) HOF-BCINST-L 58.99 PR
SMALL BEAR CLAW LATCHSmall universal latch for the trunk, hood, or small doors.SMALL BEAR CLAWS HOF-BCSM 47.99 PRSINGLE SMALL BEAR CLAW PAR-PRR-2203 26.99 EA
POLISHED STAINLESS BEAR CLAW STRIKERSThese are the striker bolts for the standard size bear claw latches. Dressup your door jamb with these polished stainless steel bolts.POLISHED STRIKERS PAR-PRR-2206 34.99 EA
STAINLESS DOOR POPPERSSpring-loaded button with rubber cap. Helps to push the door open whenusing the bearclaw latch.STAINLESS DOOR POPPERS HOF-DP-2500 29.99 EA
SUICIDE DOOR LATCH KITSet of safety latches for keeping the doors held shut on the 32-34 suicidedoor Fords and early hot rods. Kit comes complete with interior bezels,knobs and hardware. Power kit available, does both doors.1932-34 FORD VIN-40-46105/6-SDL 59.99 KITPOWER SAFTEY LACTCH HOF-DL2500 125.99 KIT
DOOR LOCKSStock door lock for the early Fords. This is the round cylinder type thatmounts under the door handle.ONE DOOR LOCK SAC-966-1 16.99 EAMATCHED PAIR OF LOCKS SAC-966-2 28.99 EA
POWER WINDOW KITSComplete kit for placing power windows in you hot rod. These kitsinclude the power lift motors, new channels for the glass, lift track,wiring, switches, and instructions.POWER WINDOW KIT BAL-PWKB-1 299.99 KIT
DOOR GLASS FELT CHANNEL KITSComplete set of felts, seals, and rubber cushions that seal up the glass inthe door. Kits available for front doors, rear fordors, quarter windows,and back windows. Call for availability and prices.28-56 FORD KITS STARTING AT 49.99 KIT
OUTSIDE DOOR HANDLESDie-cast and chrome plated handles for the exterior of the car. Be sure towatch for driver’s side (LH) and passenger side (RH). Locking doorhandles include 2 keys.28-32 OPEN CAR VIN-A-702350-O 23.99 EA32 RH CLOSED CAR (a) VIN-B-702350 25.99 EA32 LH CLOSED CAR (a) VIN-B-702351 25.99 EA33-34 RH CLOSED CAR VIN-40-702350 25.99 EA33-34 LH CLOSED CAR VIN-40-702351 25.99 EA33-34 LOCKING HANDLES (b) VIN-40-702350/1-L 59.99 PR40 RH OR LH (c) VIN-01A-702350 30.00 EA
INSIDE DOOR HANDLESDie-cast chrome plated handles for the interior of your car. More areavailable, please call.32 OPEN CAR (a) below) VIN-18-702400-A 50.00 PR32 CLOSED CAR VIN-B-702400-E 10.99 EA33-34 CLOSED CAR VIN-40-702400-E 10.99 EA40 DELUXE VIN-01A-702400 10.99 EA
INTERIOR DOOR HANDLE ESCUTCHEONSThese are the chrome trim plates for around the stock interior doorhandles. 32 open car includes 2 trim plates and 2 backing plates.1932 OPEN CAR (b) VIN-B-46270-AS 18.99 SET1932 CLOSED CAR (c) VIN-B-48139-AS 5.00 EA1934 CLOSED CAR (d) VIN-40-48139-AS 5.00 EAUNIVERSAL (e) BOB-91C-8122618 6.99 EA
INSIDE WINDOW CRANK HANDLESDie-cast chrome plated handles for rolling up and down the windows.More are available. Please call.32 CLOSED CAR (a) VIN-B-702780-E 10.99 EA33-34 CLOSED CAR (b) VIN-40-702780-E 10.99 EA
40 (c) VIN-01A-702780 11.00 EA41-48 VIN-11A-702780 11.00 EA
OPEN CAR DOOR STRIKERSteel catch on the door jamb that the door latch hooks onto.1928-32 ROADSTER VIN-B-35705 6.99 EA
CLOSED CAR DOOR CHECK STRAP KITMetal arms with rubber cushions and pins that keep the door fromswinging too far open. One kit does 2 doors.28-48 CLOSED CAR VIN-B-702828-S 7.99 KIT
OPEN CAR DOOR CHECK STRAP KITLeather straps, stainless retainer plates, and stainless hardware for theroaster and phaeton doors. These are what keep the door from swingingopen too far. One kit does 2 doors.28-32 OPEN CAR VIN-A-702828-S 16.99 KIT
EXHAUST HEADERS & ACCESSORIES
CERAMIC COATED BLOCK HUGGER HEADERSTight fit headers for early and late model Hot Rods and Customs. Theseheaders hold tight to the block. Ceramic headers have a nice shine andwon’t blue or yellow from heat like chrome or stainless. These Comecomplete with collectors, gaskets, and mounting hardware. Be sure tocheck your Chevy block for straight or angled plugs.STRAIGHT PLUG CHEVY PAT-H8027-1 289.99 PRANGLE PLUG CHEVY PAT-H8037-1 298.99 PR289-302 FORD PAT-H8427-1 309.99 PR
SANDERSON HEADERSTight fit headers for small block and big block engines. Please call fordimensions and more info on what would best fit your application.These are plain steel finish. Heat coated headers are also available,please call for prices.SMALL BLOCK CHEVY STARTING AT 299.99 PRSMALL BLOCK FORD STARTING AT 299.99 PR
FLATHEAD V8 HEADERSSteel tube headers for Flathead Fords in stock applications. These areconstructed of 16 gauge steel in 1/4+” flanges and have been surfaceground in one plane. They guarantee the fit. Most headers are rear exit.If your using a flathead in other than stock applications, like year orsteering box changes, give us a call. We also have header extensionsavailable for some models.32-34 HEADERS RED-32-HEADERS-F100 199.99 PR35-39 HEADERS RED-3539-HEADERS 199.99 PR39 DLX-40 HEADERS RED-39DLX40-HEADERS 199.99 PR41-48 HEADERS RED-4148HEADERS 199.99 PR49-51 HEADERS RED-4951HEADERS 199.99 PR49-51 MERC HEADERS RED-4951MERC-HEADERS 199.99 PR48-52 PU HEADERS RED-4852PU-HEADERS 199.99 PR35-36 EXTENSIONS RED-3536-EXTENSIONS 60.00 PR48-52 PU EXTENSIONS RED-4852P/U-EXTENSIONS 60.00 PR
EXHAUST MANIFOLD OR HEADER GASKETSUp grading your Flathead exhaust? Don’t forget the gaskets. Set includessix separate gaskets for the block and two for the collectors.32-53 BES-3071 8.99 SET
CHROME LAKE PIPESSingle or triple tip side pipes for under the sides of your car or truck.Give your ride that cool 50’s custom look. Come in three lengths60,70,80 inches long. Nonfunctional.60” SINGLE PAT-EI-1263 179.99 PR60” TRIPLE PAT-EI-1264 269.99 PR70” SINGLE PAT-EI-1273 179.99 PR70” TRIPLE PAT-EI-1274 269.99 PR80” SINGLE PAT-EI-1283 179.99 PR80” TRIPLE PAT-EI-1284 269.99 PR
LAKE PIPE HANGERChrome hangers for mounting the lake pipes under your car or truck.CHROME HANGERS PAT-EI-PC200 8.99 EA
SMITTY’S MUFFLERSOld time glass pack mufflers for that cool, deep, but not so loud sound.Great for Flatheads, small blocks, and more.22” SMITTY’S PAT-3010 32.99 EA26” SMITTY’S PAT-3011 36.99 EA30” SMITTY’S PAT-3012 39.99 EA
EXHAUST DEFLECTORSStainless covers for the end of your exhaust system. Dress it up anddeflect it down. Stamped with different designs.PLAIN PAC-A-7042 15.99 EAContinued on next page...
42
Vintage Ford & Chevrolet Parts of Arizonawww.so-calspeedshopAZ.com
“FORD” PAC-A-6109 15.99 EA“CHEVROLET” PAC-C-2002 15.99 EA“V8” PAC-A-7041 15.99 EA
AIR CONDITIONING UNITS &PARTS
GEN II AIR CONDITIONER SYSTEMThese new units use servo motors, meaning vacuum is no longer neededto operate your a/c. All vent doors in the evaporator and the hot watershut off valve are all controlled by electric servos, giving you true bi-level operations. Air or heat can exit through the dash vents, floor vents,or be split between the two. Kits include evaporator and mountingbrackets, 4 lever or turn knob controls and wiring, a/c duct hose, drainkit, and optional defrost system. Super cooler is 4 vent system, compactand mini are 3 vent. There are a number of different control panelsavailable for these units. Please call for more info.SUPER AIR/HEAT AIR-61005-VUX-QUX-A 460.99 KITSUPER AIR/HEAT/DEF AIR-61005-VUZ-QUZ-A 499.99 KITCOMPACT AIR/HEAT AIR-68000-VUX-A 419.99 KITCOMPACT AIR/HEAT/DEF AIR-68000-VUZ-QUZ-A 479.99 KITMINI AIR/HEAT AIR-66005-VUX-A 419.99 KITMINI AIR/HEAT/DEF AIR-66005-VUZ-QUZ-A 475.99 KITALUMINUM PROLINE CONTROL UPGRADE 129.99 EASTREAMLINE OVAL CONTROL UPGRADE 159.99 EA
“SURE-FIT” AIR CONDITIONING SYSTEMSComplete kits including the evaporator, compressor and bracket,condenser, drier, hoses, wiring, duct work, vents, controls, and safetyswitch, are available for some cars and trucks. These are complete kitswhere all you need is installation and refrigerant. They are designed towork with your dash, firewall, and in some cases your factory heat or a/ccontrols. Give a call to see if one is available for your ride.SURE-FIT A/C SYSTEM 1095.99 KIT
BI-LEVEL HEATERSFor those of you just needing a small compact heater for an earlyroadster, truck , jeep, or whatever, these little guys work great. Theymeasure 10” wide, 10.25” tall, and 6” deep. Single cable/switch controlincluded. Optional vents are available. Takes 2.HEATER WITH DEFROST AIR-50616-VUH 259.99 KIT
A/C INTERIOR DASH VENTSThere are quite a few styles of under and through dash vents for your caror truck. Vintage Air has designed plastic, chromed plastic, aluminum,and polished aluminum vents for all applications. Give us a call fordimensions and prices.
A/C DASH VENTSRound and rectangle dash vents with machined or polished aluminumbezels. Round vents measure 2-7/8" at the outside of the bezel. Smallrectangle measures 4-5/16" long by 2" tall, large measures 5-1/8" longby 2" tall.ROUND PAR-PRR-5015 28.00 EAROUND POLISHED PAR-PRR-5015P 36.99 EASMALL RECTANGLE PAR-PRR-5025 28.99 EASMALL POLISHED PAR-PRR-5025P 34.99 EALARGE RECTANGLE PAR-PRR-5029 28.99 EALARGE POLISHED PAR-PRR-5029P 32.99 EA
VINTAGE AIR FRONT RUNNERVintage Air announces the first Chevrolet engine component drivesystem engineered for maximum performance rather than simplycosmetics. Kit includes: Main truss bracket, Tensioner with bracket,Power steering or delete bracket, Hardware and spacer kit, Stewart highvolume water pump, Crankshaft pulley, Water pump pulley, Powersteering pulley (w/ps kit), and the Serpentine drive belt. These areavailable for either small or big block Chevy. They can be ordered forcars or trucks with or without power steering. Optional chrome pulleyswith machine finish bracket. Also listed below are the compressors andalternators that work along with this system. Requires use of Type II Gmpower steering pump. Be sure to check if SHORT or LONG water pumpkit works bets for you. Please call for more info, part numbers andprices.SBC W/O PS AIR-17501-SCH 1,150.99 KITSBC W/O PS W/CHROME AIR-17502-SCC 1,150.99 KITSBC W/PS AIR-17401-SCH 1,175.99 KITSBC W/PS W/CHROME AIR-17402-SCC 1,175.99 KITBBC W/O PS AIR-17505-SCH 1,265.99 KITBBC W/O PS W/CHROME AIR-17506-SCC 1,265.99 KITBBC W/PS AIR-17405-SCH 1,265.99 KITBBC W/PS W/CHROME AIR-17406-SCC 1,265.99 KIT
FRONT RUNNER ACCESSORIESThese accessories work with the above front runner system.Compressors include Titefit line kit. Alternator is 140 amp, 90 ampoutput at idle, one wire, and internally regulated.
SANDEN 508 A/C COMPRESSORSCompact, low hp draw compressors for aftermarket or upgraded a/csystems. These are the small compressors that Bill’s Brackets, VintageAir, Zoops, and more design all of their components to work with.These are available for R12 or 134A refrigerant, in plain or polishedfinish. Be sure to let us know if its V-Belt or Serpentine system.R12 V-BELT PLAIN TUF-4505NC-DP 249.99 EAR12 V-BELT POLISHED TUF-4505NB-DP 295.99 EA134A V-BELT PLAIN TUF-4515NC-DP 229.99 EA134A V-BELT POLISHED TUF-4515NB-DP 299.99 EA134A SERPENTINE PLAIN TUF-4515NC-6G 229.99 EA134A SERPENTINE POLISHED TUF-4515NB-6G 299.99 EA
COMPRESSOR CLUTCH COVERChromed aluminum cover for the face of the clutch. Mounts using thethree bolts in the center of the clutch. Nice piece to compliment apolished compressor, aluminum pulleys or chrome alternator.CLUTCH COVER WYS-WA8850-C 32.99 EA
COMPRESSOR TO ENGINE BRACKETSThere are quite a few brackets for Ford, Chevys, and more. We havethem in steel, powder coated black, chrome, and polished aluminum. Wealso have these for compressors and compressor/alternator combinations.Give us a call and we’ll help figure out which one will work best foryou.STEEL BRACKETS STARTING AT 89.99 EA
A/C CONDENSERSVintage Air’s state of the art super flow condensers are perfect for 134aor R12 systems. With new “micro tube technology” and improvedrefrigerant flow, these units give you up to 40% more capacity than equalsized tube and fin condensers. Be sure to measure for the biggestcondenser that you can use. Also check to see if a vertical or horizontalcondenser will work. The vertical works best for 32-48 cars and trucks.For the 39-40 Fords, they offer a condenser with pre-bent hard lines anda mounted drier. Continued...
VERTICAL 20 X 14 AIR-03332-VUC 169.99 EAHORIZONTAL 14 X 18 AIR-03260-VUC 143.99 EAHORIZONTAL 14 X 20 AIR-03261-VUC 143.99 EAHORIZONTAL 14 X 22 AIR-03262-VUC 159.99 EAHORIZONTAL 14 X 24 AIR-03263-VUC 159.99 EA39-40 FORD CONDENSER AIR-03140-VFC 199.99 KIT
SAFETY SWITCHESVintage Air will not warranty their systems without one of theseswitches. These control the power to the compressor and turn it offwhen refrigerant levels are too low or too high. The binary switchcontrols high/low pressure, the trinary controls high/low pressure andelectric fan activation when head pressure is too high. These include thefittings to install them into your ac hoses or they are available with someof the below driers.BINARY SWITCH AIR-24677-VUS 39.99 EATRINARY SWITCH AIR-24676-VUS 55.99 EA
A/C DRIERA must for all a/c systems, now you just need to choose what style youwant. Standard driers have threaded ports for the binary or trinaryswitches to screw right into. You can order your drier with the binary ortrinary switch included.STANDARD BLACK AIR-07321-VUC 31.99 EASTD BLACK W/BINARY AIR-07322-VUC 42.99 EASTD BLACK W/TRINARY AIR-07323-VUC 65.99 EASTANDARD CHROME AIR-07310-VUQ 79.99 EASTD CHROME W/BINARY AIR-07308-VUQ 89.99 EASTD CHROME W/TRINARY AIR-07309-VUQ 119.99 EA
HOSE KITSThe guys at Vintage Air use these barrier refrigerant hoses for their a/csystems. This hose works great for 134a and R12 kits. The kits includeadequate hose length to connect the complete system, O-ring fittings,crimp ferrules, and a standard black drier. 134a kit includes fittings withthe service ports for charging the system. R12 ports are on the back ofthe compressor.R12 HOSE KIT AIR-31300-VUD 109.99 KITR12 HOSE KIT W/O DRIER AIR-31302-VUD 109.99 KIT134A HOSE KIT AIR-31700-VUD 114.99 KIT134A HOSE KIT W/O DRIER AIR-31702-VUD 109.99 KIT
AC BULKHEAD FITTINGS (Pictured on next pg.)These mount into the firewall or core support, and trim the area that theAC hoses pass through. Four-way bulkhead accept AC and heater hoses.Two-way bulk heads can be ordered for either AC or heater hoses.4-WAY SQUARE (a) WYS-0103 36.99 EA4-WAY INLINE (b) WYS-0104 36.99 EA2-WAY AC (c) WYS-0101 25.99 EA2-WAY HEAT (d) WYS-0102 25.99 EA
44
Vintage Ford & Chevrolet Parts of Arizonawww.so-calspeedshopAZ.com
THE ORIGINAL CALIFORNIA CAR DUSTERThis is the good one with the wood handle. Perfect for in the garage andout at the show.DUSTER CCC-DUSTER 19.99 EA
AHOOGA HORNThis horn is made to sound like the old Model A ahooga horn. Althoughit doesn’t look like the “A” horn it does have a cool sound to it.AHOOGA HORN HOF-AA145 69.99 EA
SECRET AUDIO 100 WATT RADIO & CD CHANGERCustom auto sound has come up with solution for installing a stereosystem in any vintage car or hot rod. This “Secret Audio” “Hideaway”unit can be mounted just about anywhere. System includes 100 wattreceiver with, LCD control panel, and a radio frequency remote thatworks off of radio waves, so the control panel and receiver can bemounted anywhere in the car. You don’t have to point the remote at theradio and it works up to 80 feet away. There’s also an additional 6 discchanger that can be purchased and used with the radio.SECRET AUDIO CUS-SS 259.99 KIT10 DISC CHANGER CUS-CAM-CD10 269.99 EA
FLAMED FLOOR MATSBlack carpeted floor mats with the moon “eyes” red and yellow flames.FLOOR MATS MOO-DKMPO75-FFBK 48.99 PR
UNIVERSAL HOLLOW CORE WEATHER STRIPUniversal seal that can be used on the doors, trunk, hood, or where everyou may need weather-stripping.UNIVERSAL SEAL BOB-FG-100-30 29.99 EA
DOOR HINGE PIN TOOLTool for pulling old door hinge pins.HINGE TOOL BOB-TL-100 34.99 EA
SCISSOR JACKLooking for a compact hot rod emergency jack? This guy here is only 61/2 lbs and measures 16 11/16 x 3 15/16 x 4 1/8 iches. It is 1 1/2 toncapacity and has a lift range of 3 3/4 to 15 inches.SCISSOR JACK SOC-LAR-SJ-1 19.95 EA
POLISHED STAINLESS STEEL A/C HOSE KITComplete air conditioning hose and fitting kit made of stainless steelhardware. This kit includes braided stainless hose and stainless orpolished stainless o-ring fittings with Ferrules. When you get them ranand cut we can send you to the supplier that makes them and he’ll crimpthe lines for a small fee. This is a beautiful kit, great for any Hot Rod134-A HOSE KIT GOT-343110 399.95 KIT134-A POLISHED HOSE KIT GOT343115 509.95 KIT
HOSE FITTINGSWe stock a wide choice of a/c hose and line fittings. We have O-ringfittings, ferrules, service ports and bulk heads to run your hose straight ,45, 90 and 135 degrees up, down, in or out. Give a call to see if we havewhat you need.
ACCESSORY ITEMS
ART DECO ACCESSORIESThese cool So-Cal items all have the “Art Deco” look about them. Theymatch the dash knobs and switches that we offer. Please call for specificapplications.HORN BUTTON SOC-50415 21.99 EALOKAR SHIFT KNOB SOC-50600 26.99 EASMOOTH SHIFT KNOB SOC-62007 14.99 EAAIR CLEANER KNOB SOC-50410 8.99 EAGM COLUMN KNOBS SOC-62005 49.99 EADOOR LOCK BUTTONS SOC-62058 12.95 EAFOOT REST SOC-62052 12.99 EADIMMER SWITCH COVER SOC-50414 6.99 EA
SIGNAL LIGHT VIEWERPlastic prism that mounts to your dash or header panel above thewindshield and reflects the color of the traffic light into it. Perfect forchopped top cars where seeing the traffic light is a problem.SIGNAL VIEWER FAR-47-13000-TV 36.99 EA
LICENSE PLATE BOLTSSmall bolts for attaching the license plate to the car. Sets include fourbolts, pairs include two.CHROME BULLET BOLTS PAC-10889 4.50 SETBLACK DICE BOLTS PAC-70011 6.99 PRCHROME SKULL BOLTS PAC-70046 9.99 PRCHROME DICE BOLTS PAC-70070 4.99 PR
DECALSGreat for your windshield, tool box, or whatever you want to stick it on.Wolf and cat packs are water slide decals, the others are peel and stick.TOOL BOX DECAL SOC-91033 1.50 EADECAL PACK SOC-91111 5.00 SETWOLF PACK SOC-93172 5.00 SETDARE DEVIL PACK SOC-93171 5.00 SET
CLAY SMITH DECALSCool Clay Smith Cams “Mr. Horsepower” decals are great for any car ortruck. These are available in large (6 1/2 x 11), medium (4 1/2 x 5 3/4),and small (2 3/4 x 3 1/2). They also face right (RH) and left (LH) foropposite sides of the car.LARGE RH MOO-CSD18-R 6.00 EALARGE LH MOO-CSD18-L 6.00 EAMEDIUM RH MOO-CSD19-R 2.99 EAMEDIUM LH MOO-CSD19-L 2.99 EASMALL RH MOO-CSD17-R 2.50 EASMALL LH MOO-CSD17-L 2.50 EA
MOON “EYES” DECALSMoon offers a variety of decal to dress up your hot rod. There are threesizes of the yellow circle with the “Moon Eyes” large 8”, medium 5” ,and small 3”. The “Eye Sheet” has 8 separate stickers of the eyes, the“Moon Sheet” has 7 different old time moon logos.YELLOW LARGE MOO-DM006 5.00EAYELLOW MEDIUM MOO-DM009 3.00 EAYELLOW SMALL MOO-DM010 1.50 EAEYE SHEET MOO-DM001 5.50 EAMOON SHEET MOO-DM002 6.00 EA
IRON CROSS MOON DECALSThese “Moon Equipped” Iron Cross decals give any old time car or trucka cool look. Great for cars, bikes, tool boxes and more. Large is 6” Smallis 3 1/4”LARGE MOO-DM082-L 6.00 EASMALL MOO-DM082-S 4.00 EA
Vintage Ford & Chevrolet Parts of Arizonawww.so-calspeedshopAZ.com
SHIPPING CHARGES:We want to give you the best prices possible on shipping, that’s why we determine the cost at the time ofsale. Most orders are shipped UPS, larger items sometimes require crating and truck freight.This amount will be determined and you will be notified before shipping. Minimum UPS charge $6.95Please call if you need exact shipping amount before you order.
ORDERING INFORMATION:
TELEPHONE ORDER: Business hours are Monday - Friday 9-5 • Saturday 8-3, (mountain standardtime). Please have the following information ready: Your complete address, year and model of vehicle,part numbers and descriptions found in catalog, and your credit card information.Local orders & information • (602)275-7990Toll free order • (800)732-0076
FAX ORDERS: Orders can be faxed to us 24/7. Please use order form included in your catalog,complete all information, including credit card information.24 Hour fax • (602)267-8439
INTERNET ORDERS:Visit us at: www.so-calspeedshopAZ.com
E-MAIL ORDERS: We accept e-mail orders. Use the order form in catalog as a guide.e-mail [email protected]
MAIL ORDERS: Please use our order form filled out completely with credit card information.Mail to: 3427 E. McDowell Rd.
SPECIAL ORDERS: Full payment on all special orders, non-refundable.
SHIPPING: Parts shipped via UPS, large items commercial truck lines.
DAMAGE OR LOST ITEMS: If part is lost (box broken open) or damaged in shipment to you, pleasenotify shipper immediately. (UPS or Trucking Company).Do not return damaged parts to us. File a damage report with the carrier!
RETURNS: Returns accepted for 30 days with receipt. If part is defective or we made a mistake in theorder, we pay the shipping both ways. If it is your mistake you pay the shipping.15% restocking fee on all return items. Must have original receipt. No returns on electrical parts, partsthat have been installed, books, videos or used inventory. Special orders are non-refundable.
All returns must be authorized in advance. Call for a RGA number, 800-732-0076.You must include copy of original invoice for all returns.
PRICES: Prices are subject to change without notice. Customer will be contacted before shipment if priceincrease is large.
