So Move Simple Programming for Motion and Drive (Batch1)

What is the purpose

To understand how simple and easy So Move connect to Motion and Drive Product Schneider

What units are effected

1. So Move Software

Details This application is divided into several parts

Section Title1 Parts List 2 Topology Overview 3 Step by step link setup4 Offline testing5 Remarks

Section 1; Parts list

Parts List table Items used in the test

Items Part numbers DescriptionSo Move software So Move 2.3 Software Cable TCSMCNAM3M002P Cable Usb to RS485 COnverter

Continued on next page

Section 2; Topology overview

Topology overview diagram

Physical Topology Connection

Continued on next page

Section 3; step by step setup

Step by step and build the link on So Move :

So Move

1. Open the SoMove application

2. Enter Edit ConnectionSelect the communication between VSD and SoMoveSetting the port, baudrate and comm

3. Select the Position you needa. Connect Offline with VSDb. Connect Online with VSD

a. Connect Offline Klik Create Project Offline

So Move will show the list of Drive, after this select the Drive and the Power Rating

b. Connect OnlineMake sure your cable is connected and setting port com, baudrate, etc. And “klik” Connect

4. Device Identification

5. Operate Menu

- In the Operate Menu will show Monitoring, Input Output, and Setting Menu- Left Bar indicated read only showing and the right bar we can enter the setting depend on

motor rating. (This is the Simple Setting)

6. Identification of menu Bar and Pop Up

1. Home = Back to the new slide selection2. New Page = New Project3. Open = Open File4. Save = Save the current configuration5. Save as = Save with the new name6. Page Setup = Setup margin 7. Print Preview = Preview the slide when printed8. Print = Print the data9. Identify Device = Identify new device10. Edit Connection = Selected connection between VSD and PC11. Connect = Connect So Move to VSD12. Load from device = Capture data from VSD to SoMove 13. Store to device = Store configuration from PC to VSD14. Command Panel = Command panel function15. Personalization = Customizing the HMI of VSD

1 32 4 5 6 87 9 1110 1312

14 15

Section 4; Online Testing

Online testing :

1. Run the Command Panel of VSD2. Monitoring the condition of the motor

Command Panel must be active if you want to run VSD from the SoMove. “Klik” Active and Run after this

Monitoring Display can be selected depend what you need

Section 5; Remark

NOTE: The word "FDT Container", as used in this online help, refers to any FDT container software like SoMove, SoMachine, and so on. A DTM library contains devices in the same family. Example Altivar DTM Library FDT Container allows you to:

Install a DTM library if you want to install new devices Or modify a previously installed DTM library if you want to update existing

devices

Installation Conditions To install or modify a DTM library on your computer, you must first: Step

Action

1 Download the corresponding files available on the Schneider Electric website: www.schneider-electric.com

2 Install the FDT Container

Supported Devices If you need to work on devices which are not yet available in FDT Container, you can host both PowerSuite V2.X and other FDT software on the same computer. NOTE: PowerSuite V2.X and other FDT software programs