Date post: | 14-Apr-2017 |
Category: |
Automotive |
Upload: | buyobdtoolshop |
View: | 197 times |
Download: | 8 times |
How to use VBOX-VOLVO XC90 Diagnostic Tool
1. Connect to hardware, insert the box into OBD interface, connect the
box with internet reticle and computer reticle interface, red light sparkling.
You can find the OBD interface on the left side down of the seat.
Hardware lights instruction
LED status Status instruction
Red light sparkling hardware working ok
Green light sparkling data communication status
2. UDVOLVO is a free install application, decompression zip package to
local computer folder, run the
application…/Volvo/ASAMMCD3/UDVolvo.exe press enter after you
find your vehicle IP.
www.buyobdtool.c
om
3. Press“Vehicle identification number, read ECU information, read fault
number
4. Double press “current fault code number”, enter single ECU
Press“current fault code number or history fault code number”, press the
right button on mouse go check for detail information.
www.buyobdtool.c
om
5. Check the detail information.
www.buyobdtool.c
om
6. Check the fault code number detail information.
7. Check ECU detail information.
8. Enter ECU read fault code number history fault code number, clean up
code number, read vehicle identification number and ECU detail
information, press current “current fault code number and history fault
www.buyobdtool.c
om
code number” to clean up the fault code numbers.
www.buyobdtool.c
om