How to work with Fabric Frames
Assembly instructions
Frame construction
Accessories
Fabric information
SF-Door & EL-Doors
system-standex.dk
2
How to work with Fabric Frames
Assembly of SF-44-1, SF-44-2, SF-44-2-C, SF-44-4, SF-44-6, SF-44-9, SF-44-85, SF-44-120 frames.........................
Assembly of SF-44-5 frames............................................................................................................................................
Assembly of SF-44-7, SF-44-8 frames..............................................................................................................................
Assembly of SF-44-10 frames...........................................................................................................................................
Assembly of SF-36-2 frames............................................................................................................................................
Assembly of SF-44-2A frames..........................................................................................................................................
Assembly of SF-44-100, SF-44-150-2 frames..................................................................................................................
Assembly of SF-44-120-2, SF-44-150 frames..................................................................................................................
Assembly of BLF frames...................................................................................................................................................
Assembly of modular frames...........................................................................................................................................
Assembly of SF-44-44-2 frames.......................................................................................................................................
Assembly of SF-44-44-4 frames.......................................................................................................................................
Frame construction..........................................................................................................................................................
Assembly of SF-44-door..................................................................................................................................................
Assembly of EL-DOOR-1 and EL-DOOR -2......................................................................................................................
Assembly of EL-DOOR-3..................................................................................................................................................
TV bracket........................................................................................................................................................................
Assembly of SF-44-H.......................................................................................................................................................
Wall brackets....................................................................................................................................................................
Steel bases........................................................................................................................................................................
Fabric................................................................................................................................................................................
For more information......................................................................................................................................................
Table of contents:
3
4
5
6
7
8
9
10
11
12
13
14
15-17
18
19
20
21
22
23
24-25
26
27
system-standex.dk
3
* can be manufactured with 20W LED Strips and light panels
1105-15Profile connector (180°)
I44-2-AG/2xM6Connector
1105-15Profile connector (180°)
I44-2-AG/2xM6Connector
1201-SInternal support rail
1105-15Profile connector(180°)
1201-SDivided internalsupport rail
How to work with Fabric Frames
Valid for profiles:
Assembly instructions:
I44-2-AG/2xM6
11
SF-44-15-200
SF-44-3-15x40 SF-44-3-8x40
SF-44-44-2-D6
1105-18 l44-2AG/2xM6 SF-44-711-2001105-15
Standex
23-03-2012
1105-15
1
1:1
THK
GDS-Foot
SF-HANDLE1105-17
Standex
23-03-2012
SF-44-15-200
1
1:1
THK
Standex
23-03-2012
SF-44-44-2-D6
1 THK
standex
23-03-2012
SF-44-3-15x40
1 THK
Dobbeltsmig Double bevel: Doppelschräg:
Yderligere tilbehør findes på System Standex’s hjemmeside og i katalog for udstillings- og displaysystemer
More accessories can be found on the homepage of System Standex and in the catalogue for exhibition and display systems .
Weiteres Zubehör finden Sie auf der Homepage von System Standex sowie im Prospekt „Ausstellungs- und Dis-playssysteme“ .
Til afdækning af top og bund på profil:Endcap, top and bottom, for profile: Profilabdeckung, Top und Boden, für Profile:
For rammer af profil:For frames from profile: Für Rahmen aus Profil:
For rammer af profil:For frames from profile: Für Rahmen aus Profil:
For to-delt profil:For split profile: Für geteilte Profile:
For to-delt profil:For split profile: Für geteilte Profile:
Easy Lock låsEasy LockEasy Lock Griff
Sammen med SF-44-44-2-D6 i bund af profil:Adjustable foot: Für Verwendung mit SF-44-44-2-D6 im Boden von Profil:
Beslag for profil:Fitting for profile: Beschlag für Profile:
Justerbart beslag for profil:Adjustable fitting for profile: Justierbarer Beschlag für Profile:
For to-delt profil:For split profile: Für geteilte Profile:
Tilbehør:Accessories: Zubehör:
Vi leverer gerne stof-bannere med print til Standex Smart-Frame - et færdigt system klar til brug .
I kan også selv lave bannere med print efter vores specifi-kationer .
Beregn størrelse på banner:Udvendig rammemål - 4 mm + 20 mm indsyet pvc-bånd på alle sider .
We can supply the fabric graphics for the Standex SmartFrames – as a ready to go product .
You can also make the graphics yourselves – please see specifi-cation details .
Calculate fabric size:Outer frame measurement - 4 mm + 20 mm for sewed in pvc-profile on all sides.
Wir liefern gerne Textil-banner mit Druck für Standex Smart-Frame – als komplettes System .
Sie können auch die Banner nach unseren Spezifikationen fertigen lassen .
Grösse des Banners berechnen:Rahmen-Aussenmass - 4 mm + 20 mm eingenähtes PVC-Profil auf allen 4 Seiten .
SF-44-5, SF-44-7 & SF-44-8
SF-44-1, SF-44-2, SF-44-4, SF-44-6, SF-44-9, SF-44-85, SF-44-120 & 1102-1
SF-44-1, SF-44-2, SF-44-4, SF-44-6, SF-44-9, SF-44-85, SF-44-120 & 1102-1 SF-44-7 og SF-44-8 SF-44-5
SF-44-1, SF-44-4, SF-44-6 & SF-44-7 SF-44-5 SF-44-44-2
SF-44-44-2
PVC-profil til monteringaf stofbanner PVC-profile for the fit-ting of fabrics PVC-Profil für Montage von Textildrucken
NL
1231-2
Øjeskrue for skydemøtrik:Eye bolt for sliding nuts:Ösenschraube für Aufhängebeshlag:
1231-3
Øjeskrue for profil: Eye bolt for profile:Ösenschraube für Profile:
SF-44-44-2GDS-711-M6
1105-20-1Beslag for profil:Fitting for profile: Beschlag für Profile:
1105-16
NL
GDS-711-M6Skydemøtrik M6Sliding nut M6Nutenstein M6
WS-26-S
Profil til afstivning af store rammer af profilProfile for supporting large framesVersteifungsprofil für große Rahmen
SF-44-1, SF-44-2, SF-44-4, SF-44-6, SF-44-7, SF-44-8, SF-44-9, SF-44-85, SF-44-120 & SF-44-44-2 .
1105-19For rammer af profil:For frames from profile: Für Rahmen aus Profil:
1105-16
M-I50-22For rammer af profil:For frames from profile: Für Rahmen aus Profil:
SF-44-44-2
NL
NL
SFS-BASEFodpladeBase plate Fußplatte
WSF-GDSFodpladeBase plate Fußplatte
WSF-FrameFodpladeBase plate Fußplatte
WSF-SFSFodpladeBase plate Fußplatte
NL
SF-HANDLE# 1105-15
Accessories:
Connector Handle Profile connector (180°)
1201-S
Internal support rail
Standex
23-03-2012
1105-15
1
1:1
THK
SF-44-1 SF-44-2 SF-44-4* SF-44-6 SF-44-9**
SF-44-120***SF-44-85*** *** can be manufactured with 5x3W and 3x3W LED modules
** can be manufactured with 5 or 12mm panels in the back
#cannot be used for SF-44-2-C, SF-44-6, SF-44-85 and SF-44-120
SF-44-2-C
system-standex.dk
4
SF-44-15-200Profile connector (180°)
1105-18Connector
SF-44-15-200Profile connector (180°)
1105-18Connector
LED-Panel
SF-44-5
How to work with Fabric Frames
Valid for profiles:
Assembly instructions:
1105-18 SF-44-15-200
Accessories:
Connector Profile connector (180°)
Standex
23-03-2012
SF-44-15-200
1
1:1
THK
system-standex.dk
5
SF-44-15-200Profile connector (180°)
1105-18Connector
SF-44-15-200Profile connector (180°)
1105-18Connector
1201-SInternal support rail
1105-15Profile connector(180°)
1201-SDivided internalsupport rail
SF-44-7 SF-44-8
1105-18 SF-44-15-200 1201-S
Internal support rail
How to work with Fabric Frames
Valid for profiles:
Assembly instructions:
Accessories:
Connector Profile connector (180°)
Standex
23-03-2012
SF-44-15-200
1
1:1
THK
system-standex.dk
6
2 x SF-44-15-200Profile connector (180°)
2 x 1105-18Connector
2 x SF-44-15-200Profile connector (180°)
1105-25Connector
1201-SInternal support rail
1105-15Profile connector(180°)
1201-SDivided internalsupport rail
SF-44-10
1105-18 1105-25
How to work with Fabric Frames
Valid for profiles:
Assembly instructions:
Accessories:
Top connector
1201-S
Internal support rail
SF-44-15-200
Profile connector (180°)
Standex
23-03-2012
SF-44-15-200
1
1:1
THK
Bottom connector
w/ special screws: PC44-5-SF10
system-standex.dk
7
How to work with Fabric Frames
1105-36Profile connector (180°)
I36-2-AG/2xM6Connector
1105-36Profile connector (180°)
I36-2-AG/2xM6Connector
1201-SInternal support rail
1105-15Profile connector(180°)
1201-SDivided internalsupport rail
Valid for profiles:
SF-36-2
Assembly instructions:
I36-2-AG/2xM6
11
SF-44-15-200
SF-44-3-15x40 SF-44-3-8x40
SF-44-44-2-D6
1105-18 l44-2AG/2xM6 SF-44-711-2001105-15
Standex
23-03-2012
1105-15
1
1:1
THK
GDS-Foot
SF-HANDLE1105-17
Standex
23-03-2012
SF-44-15-200
1
1:1
THK
Standex
23-03-2012
SF-44-44-2-D6
1 THK
standex
23-03-2012
SF-44-3-15x40
1 THK
Dobbeltsmig Double bevel: Doppelschräg:
Yderligere tilbehør findes på System Standex’s hjemmeside og i katalog for udstillings- og displaysystemer
More accessories can be found on the homepage of System Standex and in the catalogue for exhibition and display systems .
Weiteres Zubehör finden Sie auf der Homepage von System Standex sowie im Prospekt „Ausstellungs- und Dis-playssysteme“ .
Til afdækning af top og bund på profil:Endcap, top and bottom, for profile: Profilabdeckung, Top und Boden, für Profile:
For rammer af profil:For frames from profile: Für Rahmen aus Profil:
For rammer af profil:For frames from profile: Für Rahmen aus Profil:
For to-delt profil:For split profile: Für geteilte Profile:
For to-delt profil:For split profile: Für geteilte Profile:
Easy Lock låsEasy LockEasy Lock Griff
Sammen med SF-44-44-2-D6 i bund af profil:Adjustable foot: Für Verwendung mit SF-44-44-2-D6 im Boden von Profil:
Beslag for profil:Fitting for profile: Beschlag für Profile:
Justerbart beslag for profil:Adjustable fitting for profile: Justierbarer Beschlag für Profile:
For to-delt profil:For split profile: Für geteilte Profile:
Tilbehør:Accessories: Zubehör:
Vi leverer gerne stof-bannere med print til Standex Smart-Frame - et færdigt system klar til brug .
I kan også selv lave bannere med print efter vores specifi-kationer .
Beregn størrelse på banner:Udvendig rammemål - 4 mm + 20 mm indsyet pvc-bånd på alle sider .
We can supply the fabric graphics for the Standex SmartFrames – as a ready to go product .
You can also make the graphics yourselves – please see specifi-cation details .
Calculate fabric size:Outer frame measurement - 4 mm + 20 mm for sewed in pvc-profile on all sides.
Wir liefern gerne Textil-banner mit Druck für Standex Smart-Frame – als komplettes System .
Sie können auch die Banner nach unseren Spezifikationen fertigen lassen .
Grösse des Banners berechnen:Rahmen-Aussenmass - 4 mm + 20 mm eingenähtes PVC-Profil auf allen 4 Seiten .
SF-44-5, SF-44-7 & SF-44-8
SF-44-1, SF-44-2, SF-44-4, SF-44-6, SF-44-9, SF-44-85, SF-44-120 & 1102-1
SF-44-1, SF-44-2, SF-44-4, SF-44-6, SF-44-9, SF-44-85, SF-44-120 & 1102-1 SF-44-7 og SF-44-8 SF-44-5
SF-44-1, SF-44-4, SF-44-6 & SF-44-7 SF-44-5 SF-44-44-2
SF-44-44-2
PVC-profil til monteringaf stofbanner PVC-profile for the fit-ting of fabrics PVC-Profil für Montage von Textildrucken
NL
1231-2
Øjeskrue for skydemøtrik:Eye bolt for sliding nuts:Ösenschraube für Aufhängebeshlag:
1231-3
Øjeskrue for profil: Eye bolt for profile:Ösenschraube für Profile:
SF-44-44-2GDS-711-M6
1105-20-1Beslag for profil:Fitting for profile: Beschlag für Profile:
1105-16
NL
GDS-711-M6Skydemøtrik M6Sliding nut M6Nutenstein M6
WS-26-S
Profil til afstivning af store rammer af profilProfile for supporting large framesVersteifungsprofil für große Rahmen
SF-44-1, SF-44-2, SF-44-4, SF-44-6, SF-44-7, SF-44-8, SF-44-9, SF-44-85, SF-44-120 & SF-44-44-2 .
1105-19For rammer af profil:For frames from profile: Für Rahmen aus Profil:
1105-16
M-I50-22For rammer af profil:For frames from profile: Für Rahmen aus Profil:
SF-44-44-2
NL
NL
SFS-BASEFodpladeBase plate Fußplatte
WSF-GDSFodpladeBase plate Fußplatte
WSF-FrameFodpladeBase plate Fußplatte
WSF-SFSFodpladeBase plate Fußplatte
NL
EL-HANDLE 1105-36
TITLE:
12-03-2014
Herluf Trolles Vej 140 - DK-5220 Odense SØ
CASE:
A4 LandscapeDATE:
DRAWING NO.:
-
DESIGNER:
CLIENT:
[email protected] - www.system-standex.dk
COPYRIGHT SYSTEM STANDEX A/S
Tel.: +45 6615 6615 - Fax.: +45 6615 5548
G:\Cob-mal\
PART NO.:
REV. DATE:
1105-36
-
G:\Cob-mal\
TIMEMAP:
-
MATERIAL:
SYSTEM STANDEX A/S
SUPPLIER:
-FS.NR.:
1105-36 | Samleled til 2-delt 36mm sarg
THK
12-03-2014
-
WEIGHT IN KILOS:
System Standex A/S
1105-36
PAPER:SCALE:1:1
12
16
200
50 25 50 50
4 x M6 u/s
25
8
Accessories:
Connector Handle Profile connector (180°)
1201-S
Internal support rail
system-standex.dk
8
How to work with Fabric Frames
Valid for profiles:
Assembly instructions:
Accessories:
Connector
1105-15-handle
Profile connector (180°)
I44-2A-SF - Venstre I44-2A-SF - Højre
SF-44-2A
WS-27-2A-S
Internal support rail
I44-2A-SF - VenstreConnector
WS-27-2A-SInternal support rail
I44-2A-SF - VenstreConnector
I44-2A-SF - HøjreConnector
I44-2A-SF - HøjreConnector
1105-15-handleProfile connector (180°)
1105-15-handleProfile connector (180°)
Connector
NEW
system-standex.dk
9
How to work with Fabric Frames
Valid for profiles:
Assembly instructions:
Accessories:
Connector Profile connector (180°)
1201-S
Internal support rail
1105-25 1105-26 + 1105-28
SF-44-100*
SF-44-150-2*
*can be fitted with 110-230V 6x3W LED modules
Only for SF-44-100
RC36-5 + 1105-32
Internal support rail
Only for SF-44-150-2
1105-26 + 1105-28Profile connector (180°)2 x 1105-25
Connector
1105-26 + 1105-28Profile connector (180°)
2 x 1105-25Connector
1105-15Profile connector(180°)
1201-SDivided internalsupport rail
1201-SInternal support rail
Mounting of 1201-S in SF-44-100placed in back side
Mounting of RC36-5 in SF-44-150-2placed between LED-modules
NEW
system-standex.dk
10
2 x 1105-26Profile connector (180°)2 x 1105-25
Connector
2 x 1105-26Profile connector (180°)
2 x 1105-25Connector
WS-27-SInternal support rail
How to work with Fabric Frames
Valid for profiles:
Assembly instructions:
1105-25
Accessories:
Connector Profile connector (180°)
WS-27-S
Internal support rail
SF-44-120-2*
*can be fitted with 5x3W and 3x3W LED modules
1105-26
Mounting of WS-27-S in SF-44-120-2placed between LED-modules
Mounting of WS-27-S in SF-44-150placed between LED-modules
SF-44-150*
system-standex.dk
11
How to work with Fabric Frames
Valid for profiles:
Assembly instructions:
Accessories:
Connector
SF-44-15-200
Profile connector (180°)
1105-18
BLF-68
SF-44-15-200Profile connector (180°)
1105-18Connector
SF-44-15-200Profile connector (180°)
1105-18Connector
BLF-LProfile
BLF-68Profile
3mm Back panel
LED-Bar
BLF-L
Standex
23-03-2012
SF-44-15-200
1
1:1
THK
BLF-68 BLF-L
system-standex.dk
12
How to work with Fabric Frames
Valid for profiles:
Assembly instructions:
Accessories:
Connector
1105-28
Profile connector (180°)
1105-25
SF-44-68-2
1105-25Connector
LED-Bar
3mm Back panel
SF-36-1 + SF-32-EPSide profile + extensions profile
SF-32-EPExtensions profile
SF-44-68-2Top profile
1105-25Connector
SF-44-68-2Bottom profile
SF-44-68-2Top profile
SF-44-68-2Bottom profile1105-28
Profile connector (180°)
1105-28Profile connector (180°)
SF-36-1 + SF-32-EPSide profile + extensions profile
SF-36-1Side profile
SF-32-EP
SF-36-1
Hægtebeslag Højre
Hook bracket
Hægtebeslag Venstre
Hook bracket
Top & bottom profile
SF-44-68-2Bottom profile
SF-36-1Side profile
SF-32-EPExtensions
SF-32-EPExtensions profile
3mm Back panel
SF-36-1Side profile
profile
SF-44-68-2Bottom profile
SF-36-1Side profile
SF-32-EPExtensions
SF-32-EPExtensions profile
3mm Back panel
SF-36-1Side profile
profile
SF-44-68-2Bottom profile
SF-36-1Side profile
SF-32-EPExtensions
SF-32-EPExtensions profile
3mm Back panel
SF-36-1Side profile
profile
Side profile Extensions profile
system-standex.dk
13
1105-15Profile connector (180°)
1105-15Profile connector (180°)
1201-SInternal support rail
1105-15Profile connector(180°)
1201-SDivided internalsupport rail
SF-44-44-2
How to work with Fabric Frames
Valid for profiles:
Assembly instructions:
Accessories:
Profile connector (180°) Internal support rail
Standex
23-03-2012
1105-15
1
1:1
THK
Example:
SF-44-44-2
SF-44-1
1105-15 1201-S
system-standex.dk
14
1105-15Profile connector (180°)
1105-15Profile connector (180°)
1201-SInternal support rail
1105-15Profile connector(180°)
1201-SDivided internalsupport rail
SF-44-44-4
How to work with Fabric Frames
Valid for profiles:
Assembly instructions:
Accessories:
Profile connector (180°) Internal support rail
Standex
23-03-2012
1105-15
1
1:1
THK
Example:
1105-15 1201-S
system-standex.dk
15
SF-44-2 SF-44-1
SF-44-4
SF-44-2-C
SF-44-5
Frame construction
NL
NL
SF-44-6
NL
NL
NL
NL
SF-44-7 SF-44-8
NL
SF-44-9
NL
SF-44-10 SF-44-2A
NL
LED: 12 V LED: 12 V
SF-36-2
ACOUSTIC
system-standex.dk
16
SF-44-100SF-44-85
SF-44-120
Single sided Double sided
Frame construction
SF-44-120-2
Double sided
LED: 110-230 V
LED: 24 V
LED: 24 V
LED: 24 V
SF-44-68-2BLF-68
LED: 24 V LED: 24 V
system-standex.dk
17
Frame construction
SF-44-150
Double sided
SF-44-150-2
Double sided
LED: 110-230 V
LED: 24 V
system-standex.dk
18
SF-44-DOOR
207325
00
940
400
925
HingeDoor catch Door step
Handlewith lock
5
Top frame included
SF-44-DOOR fabric size:
1 x Door fabric W.925 x H.2073mm1 x Top frame fabric W.940 x H.400mm
Doorstep
Frame
Slidingnut
Frame
Door Catch
Hinge
Door
Sliding nuts
Sliding nut
Doorstep
Frame
Slidingnut
Frame
Door Catch
Hinge
Door
Sliding nuts
Sliding nut
Doorstep
Frame
Slidingnut
Frame
Door Catch
Hinge
Door
Sliding nuts
Sliding nut
The door can be used as left or right hinged
system-standex.dk
19
EL-DOOR-1 & EL-DOOR-2
EL-DOOR-1 fabric size:
1 x Fabric W.992 x H.1958mm
The door can be used as left or right hinged
Standex
22-09-2017
EL-DOOR 1,2
Assembly MG
995
992
5mm
cle
aran
ceov
er d
oor
Mount the support wheel as shown
963
Swivel upright
Magnet
Doorcatch
Handle
Handle to attachwheel
RC44-8-2000
Dividedhere
37
350
100
548
548
100
350
EL-DOOR-2 fabric size:
1 x Top fabric W.992 x H.995mm1 x Bottom fabric W.992 x H.963mm
system-standex.dk
20
EL-DOOR-3
EL-DOOR-3 graphic size:
1 x Top panel W.992 x H.995mm1 x Bottom panel W.992 x H.978mm
The door can be used as left or right hinged
Standex
22-09-2017
EL-DOOR 3
Assembly MG
995
992
5mm
cle
aran
ceov
er d
oor
Mount the supportwheel as shown
978
Swivel upright
Magnet
Doorcatch
Handle
Handle to attachwheel
Magnet-foot-2to stop panelssliding down
37
15
RC44-8-2000
Divided here54
854
810
035
535
510
0
system-standex.dk
21
TV bracket
Valid for profiles:
SF-44-1 SF-44-2
TV Bracket
Frame Width
Fram
e H
eigh
t
Assembly instructions:
TV Bracket
Frame Width
Fram
e H
eigh
t
100
200
300
400
100
200
300
400
Vesa 100/200/300/400
system-standex.dk
22
SF-44-H
How to work with Fabric Frames
Valid for profiles:
Assembly instructions:
LED
LED
LED
LED
Frame in miter joint
system-standex.dk
23
Wall brackets
THK
standex
23-03-2012
SF-44-3-15x40
1 THK
SF-44-3-15x40
SF-44-3-8x40
Fits to: SF-44-1, SF-44-4, SF-44-6 & SF-44-7
Fits to: SF-44-5, SF-44-10, SF-44-68-2, SF-36-1, SF-44-100 & BLF-68
Mounting:
Mounting:
SF-44-4-30x60Fits to: SF-44-2, SF-44-2-C & SF-36-2
standex
23-03-2012
SF-44-3-15x40
1 THK
Mounting:
SF-44-85-40-13Fits to: SF-44-85, SF-44-100
THK
Mounting:
system-standex.dk
24
Steel bases
WSF-SFS 250x100x5mmFits to: SF-44-1, SF-44-2, SF-44-4, SF-44-9, SF-44-10 & SF-36-2
NL
Mounting:
WSF-SFS-2 500x100x5mmFits to: SF-44-1, SF-44-2, SF-44-4, SF-44-9, SF-44-10 & SF-36-2
Mounting:MG
1 2
Included:2 pcs. Screw : M6x122 pcs. Sliding nut: GDS-711-M6
Included:2 pcs. Screw : M6x122 pcs. Sliding nut : GDS-711-M6
WSF-SFS-3 500x100x5mmFits to: SF-44-85, SF-44-120
Included:2 pcs. Screw: M6x301 pcs. Insert: SP12-30-100/G4xM6
WSF-SFS-4 500x100x5mmFits to: SF-44-100, SF-44-120-2, SF-44-150 & SF-44-150-2
Mounting:
Mounting:
Included:2 pcs. Screw: M6x162 pcs. Insert: SF711-120-150
1
1
SCALE:
DRAWING NO.:
Herluf Trolles Vej 140 - DK-5220 Odense SØ
CLIENT:
COPYRIGHT SYSTEM STANDEX A/S
[email protected] - www.system-standex.dk
5mm ST.37
Tel.: +45 6615 6615 - Fax.: +45 6615 5548
-
G:\Fodplader\
PART NO.:
G:\Fodplader\WSF-SFS
TIMEMAP:
Arm-Tec
MATERIAL:
PAPER:
SUPPLIER:
-
SYSTEM STANDEX A/S
-FS.NR.:
WSF-SFS
11-01-2013
THKDESIGNER:
System Standex A/S
WSF-SFS
WEIGHT IN KILOS:
TITLE:
10-03-2014REV. DATE:
CASE:
A4 LandscapeDATE:
1:2
A
5
DETAIL ASCALE 2 : 1 1
10 10
8
16
250
100 50
R5
234
2 x6,6 THRU
12,6 X 90°12,6
1
MG
1 2
WSF-SFS-5 250x100x5mmFits to: SF-44-85, SF-44-120
Mounting:
1
Included:2 pcs. Screw : M6x301 pcs. Insert : SP12-30-100/G4xM6
system-standex.dk
25
Steel bases
WSF-SFS-6 484x100x5mmFits to: SF-44-85, SF-44-120
Mounting:
Included:4 pcs. Screw : M6x301 pcs. Insert : SP12-30-100/G4xM6
WSF-Handle 500x80x5mmFits to: SF-44-1, SF-44-2, SF-44-2A, SF-44-4, SF-44-9 & SF-36-2
Mounting:
1
1
WSF-Frame Ø340x5mmFits to: SF-44-1, SF-44-2, SF-44-4, SF-44-9, SF-44-10 & SF-36-2
NL
Mounting:
1
MG
2
Included:2 pcs. Screw : M6x122 pcs. Sliding nut: GDS-711-M6
WSF-SFS-10 335x335x15mm - weight: 10 kg.Fits to: SF-44-1, SF-44-4, SF-44,6, SF-44-7, SF-44-9, SF-44-85 & SF-44-100
Mounting:
1
Included:2 pcs. Handle: GDS-HANDLE
WSF-SFS-11 500x100x5mmFits to: SF-44-1, SF-44-2, SF-44-2A, SF-44-4, SF-44-9 & SF-36-2
Mounting:
1 2
Included:2 pcs. Screw : M6x122 pcs. Sliding nut: GDS-711-M6
system-standex.dk
26
Fabric
Technical info:
Graphic dimensions = external dimensions of the frame
Smartframe:
Graphics for print:Bleed = graphic dimensions plus 40mm on each side
PDF in minimum 100 dpi in 1:1
Colors in CMYK
Fonts attached or outlined
Printfiles:
YES NO
Fitting the fabric:
FabricFabric
Fabric
Fabric
system-standex.dk
27
Modular system for large fabric printsEASYLOCK-1
EASYLOCK rammerEASYLOCK frames EASYLOCK Rahmen
Enkel montering af grafikEasy mount graphicsSimples montieren der Grafik
Modular Fabric PrintEASYLOCK-2
EASYLOCK rammerEASYLOCK frames EASYLOCK Rahmen
Enkel montering af grafikEasy mount graphicsSimples montieren der Grafik
For more information on
Modular Magnetic PanelsEASYLOCK-3
EASYLOCK rammerEASYLOCK frames EASYLOCK Rahmen
Enkel montering af grafikEasy mount graphicsSimples montieren der Grafik
STANDEX FABRIC
SF Frames SF Exhibitor
Profile system for fabric graphics
Please contact us at:SYSTEM STANDEX A/S Herluf Trolles Vej 140 - DK-5220 Odense SØ Tel.: +45 66 15 66 15 [email protected] - www.system-standex.dk
Light boxes for graphic panels Slanke lyskasser Slim frame light box Schlanke Leuchtrahmen
Alternativ til lyskasser med print på stof, har System Standex fremstillet en lyskasse til print på plader, papir mm. – printet er nemt af udskifte.Lyskasser kan fås i størrelse efter ønske, væghængt, fritstående eller nedhængt fra loft. Kontakt os for et uforpligtende tilbud.
As an alternative to light boxes with fabric graphics System Standex has developed a light box for graphics on panel and paper.The light boxes are manufectured to your size and specification. They can be wall mounted, free standing or hanging. Please contact us for a quotation.
Als Alternative zu den Standard Leuchtrahmen mit Textildruck haben wir einen Leuchtrahmen für Plattendruck und Papier entwickelt. Der Druck ist gewohnt einfach auswechselbar. Die Leuchtrahmen sind gemäß Ihrer individuellen Spezifikation lieferbar. Es gibt sie freistehend, wand- oder deckenhängend. Bitte kontaktieren Sie uns für ein unverbindliches Angebot.
BLF-68 BLF-L
Nem udskiftning af printEasy change of printsEinfach auswechselbares Druck
NEW
Udstillingssystemet opbygges uden brug af værktøj
Samles/adskilles med greb uden brug af værktøj
De helt rigtige rammer til enhver virksomhed - smarte, praktiske og fleksible på samme tid
STOFPRINT
STOFPRINT MED LEDLYS
STOFPRINT MED AKUSTIKPLADE
System Standex A/S Herluf Trolles Vej 140 · DK - 5220 Odense SØ Phone: +45 66 15 66 15 · Fax: +45 66 15 55 48 [email protected] · system-standex.dk