Bell Work – 9/19/16:How would you call the default constructor for a class called BankAccount?
Agenda:• Notes on Chapter 3.• Create a class with constructors and methods.
Objectives:• To become familiar with the process of implementing
classes • To be able to implement simple methods • To understand the purpose and use of constructors
Chapter 3
Implementing Classes
Black Boxes
A black box magically does its thing Hides its inner workings Encapsulation: the hiding of unimportant
details What is the right concept for each particular
black box? Continued…
Black Boxes
Concepts are discovered through abstraction Abstraction: taking away inessential features,
until only the essence of the concept remains (details of how something works doesn’t matter to the user)
In object-oriented programming the black boxes from which a program is manufactured are called objects
Levels of Abstraction: A Real-Life Example
Figure 1:Levels of Abstraction in Automobile Design
• Black boxes in a car: transmission, electronic control module, etc.
Levels of Abstraction: A Real- Life Example
Users of a car do not need to understand how black boxes work
Interaction of a black box with outside world is well-defined Drivers interact with car using pedals, buttons, etc. Mechanic can test that engine control module
sends the right firing signals to the spark plugs For engine control module manufacturers,
transistors and capacitors are black boxes produced by an electronics component manufacturer
Continued…
Levels of Abstraction: A Real- Life Example
Encapsulation leads to efficiency (hiding of unimportant details): Mechanic deals only with car components (e.g.
electronic control module), not with sensors and transistors
Driver worries only about interaction with car (e.g. putting gas in the tank), not about motor or electronic control module
Levels of Abstraction: Software Design
Figure 2:Levels of Abstraction in Software Design
Levels of Abstraction: Software Design
Old times: computer programs manipulated primitive types such as numbers and characters
Manipulating too many of these primitive quantities is too much for programmers and leads to errors
Solution: Encapsulate routine computations to software black boxes
Continued…
Levels of Abstraction: Software Design
Abstraction used to invent higher-level data types
In object-oriented programming, objects are black boxes
Encapsulation: Programmer using an object knows about its behavior, but not about its internal structure
Continued…
Levels of Abstraction: Software Design
In software design, you can design good and bad abstractions with equal facility; understanding what makes good design is an important part of the education of a software engineer
First, define behavior of a class; then, implement it
Self Check
1. In Chapters 1 and 2, you used System.outas a black box to cause output to appear on the screen. Who designed and implemented System.out?
Ans: The programmers who designed and implemented the Java library
Designing the Public Interface of a Class
The public constructors and methods of a class form the public interface of the class.
Behavior of bank account (abstraction): deposit money withdraw money get balance
Designing the Public Interface of a Class: Methods
Methods of BankAccount class:
We want to support method calls such as the following:harrysChecking.deposit(2000);harrysChecking.withdraw(500);System.out.println(harrysChecking.getBalance());
deposit withdraw getBalance
Designing the Public Interface of a Class: Method Definition
access specifier (such as public) return type (such as String or void) method name (such as deposit) list of parameters (double amount for deposit)
method body in { }
Continued…
Designing the Public Interface of a Class: Method Definition
public void deposit(double amount) { . . . }
public void withdraw(double amount){ . . . }
public double getBalance() { . . . }
Examples
Designing the Public Interface of a Class: Constructor Definition
A constructor initializes the instance variables Constructor name is the same as the class
namepublic BankAccount(){
// body--filled in later}
Continued…
Designing the Public Interface of a Class: Constructor Definition
Constructor body is executed when new object is created
Statements in constructor body will set the internal data of the object that is being constructed
All constructors of a class have the same name Compiler can tell constructors apart because
they take different parameters
Purpose of a Constructor
Initialize the private instance fields
Let’s Create the Bank Account Class!
It will have 2 constructors: A default constructor that takes no parameters A constructor that takes in an initial balance
It will have 3 methods: Deposit method Withdraw method Get Balance method
It also needs instance variables and lots of comments!
BankAccount Public Interface The public constructors and methods of a class
form the public interface of the class.
public class BankAccount{
// Constructorspublic BankAccount(){
// body--filled in later} public BankAccount(double initialBalance){
// body--filled in later}
Continued…
BankAccount Public Interface
// Methods public void deposit(double amount)
{// body--filled in later
}
public void withdraw(double amount) {
// body--filled in later} public double getBalance() {
// body--filled in later}// private fields--filled in later
}
Bell Work – 9/20/16:1. How can you use the methods of the public interface of the BankAccount class to empty the harrysChecking bank account?2. Suppose you want a more powerful bank account abstraction that keeps track of an account number in addition to the balance. How would you change the public interface to accommodate this enhancement?
Agenda:• Finish the BankAccount class (well, preliminarily).• Some more notes on Chapter 3.
Objectives:• To understand how to access instance fields and local
variables • To appreciate the importance of documentation comments
Commenting on the Public Interface/**
Withdraws money from the bank account.@param amount the amount to withdraw
*/public void withdraw(double amount){
// implementation filled in later}
/**Gets the current balance of the bank account.@return the current balance
*/public double getBalance(){
// implementation filled in later}
Class Comment
/**A bank account has a balance that canbe changed by deposits and withdrawals.
*/public class BankAccount{
. . .}
• Provide documentation comments for every class every method every parameter every return value.
Javadoc Method Summary
Javadoc Method Detail
Self Check5. Suppose we enhance the BankAccount class
so that each account has an account number. Supply a documentation comment for the constructor BankAccount(intaccountNumber, double initialBalance)
Ans: /**
Constructs a new bank account with a given initial balance.@param accountNumber the account number for this account@param initialBalance the initial balance for this account
*/
Self Check Continued…6. Why is the following documentation comment
questionable?
Ans: The first sentence of the method description should describe the method because it is displayed in isolation in the summary table.
Better: /** Gets the account number of the bank account. … */
/**Each account has an account number.@return the account number of this account.
*/int getAccountNumber()
Instance Fields
An object stores its data in instance fields Field: a technical term for a storage location
inside a block of memory Instance of a class: an object of the class The class declaration specifies the instance
fields:public class BankAccount{
. . .private double balance;
}
Instance Fields
An instance field declaration consists of the following parts: access specifier (such as private) type of variable (such as double) name of variable (such as balance)
Each object of a class has its own set of instance fields
You should declare all instance fields as private
Instance Fields
Figure 5:Instance Fields
Accessing Instance Fields
The deposit method of the BankAccountclass can access the private instance field:
Continued…
public void deposit(double amount){
double newBalance = balance + amount;balance = newBalance;
}
Or
public void deposit(double amount){
balance += amount;}
Accessing Instance Fields
Other methods cannot:
Encapsulation = Hiding data and providing access through methods
public class BankRobber{
public static void main(String[] args){BankAccount momsSavings = new BankAccount(1000);. . .momsSavings.balance = -1000; // ERROR
}}
Self Check
7. Suppose we modify the BankAccountclass so that each bank account has an account number. How does this change affect the instance fields?
Ans:An instance field needs to be added to the class. What code is needed?private int accountNumber;
Self Check Continued…
8. What are the instance fields of the Rectangle class? Ans:
private int x;private int y;private int width;private int height;
x valuey valuewidthheight
What would the code be?
Implementing Constructors
Constructors contain instructions to initialize the instance fields of an object
public BankAccount(){
balance = 0;}public BankAccount(double initialBalance){
balance = initialBalance;}
Constructor Call Example Create a new object of type BankAccount with $1,000
Calls the second constructor (since a construction parameter is supplied) Sets the parameter variable initialBalance to 1000 Sets the balance instance field of the newly created
object to initialBalance Returns an object reference, that is, the memory location
of the object, as the value of the new expression Store that object reference in the harrysChecking
variable
BankAccount harrysChecking = new BankAccount(1000);
Implementing Methods
Some methods do not return a value
Some methods return an output value
public void withdraw(double amount){
double newBalance = balance - amount;balance = newBalance;
}
public double getBalance(){
return balance;}
Method Call Example
Set the parameter variable amount to 500 Fetch the balance field of the object whose
location is stored in harrysChecking Add the value of amount to balance and store
the result in the variable newBalance Store the value of newBalance in the balance instance field, overwriting the old value
harrysChecking.deposit(500);
Syntax 3.5: The return Statement
return expression;or return;
Example:return balance;
Purpose:To specify the value that a method returns, and exit the method immediately. The return value becomes the value of the method call expression.
Used with a void method to simply exit the method. No actual value is returned.
Use of the Return 01: public class BankAccount 02: { 03: public BankAccount() 04: { 05: balance = 0; 06: } 07: public void deposit(double amount) 08: { 09: if (amount == 0) 10: return; 11: else 12: balance += amount; 13: } 14: public double getBalance() 15: { 16: return balance; 17: } 18:
Used to simply exit method
Used to return a value - balance
File BankAccount.java01: /**02: A bank account has a balance that can be changed by 03: deposits and withdrawals.04: */05: public class BankAccount06: { 07: /**08: Constructs a bank account with a zero balance.09: */10: public BankAccount()11: { 12: balance = 0;13: }14:15: /**16: Constructs a bank account with a given balance.17: @param initialBalance the initial balance 18: */
Continued…
File BankAccount.java19: public BankAccount(double initialBalance)20: { 21: balance = initialBalance;22: }23: 24: /**25: Deposits money into the bank account.26: @param amount the amount to deposit27: */28: public void deposit(double amount)29: { 30: double newBalance = balance + amount;31: balance = newBalance;32: }33:34: /**35: Withdraws money from the bank account.36: @param amount the amount to withdraw
Continued…
File BankAccount.java37: */38: public void withdraw(double amount)39: { 40: double newBalance = balance - amount;41: balance = newBalance;42: }43:44: /**45: Gets the current balance of the bank account.46: @return the current balance47: */48: public double getBalance()49: { 50: return balance;51: }52:53: private double balance;54: }
Bell Work – 9/21/16:1. The rectangle class has four instance fields: x, y,
width, and height. Give a possible implementation of the getWidth method.
2. Give a possible implementation of the translatemethod of the Rectangle class.
Agenda:• Continue working on Chapter 3 programming assignments.
Objectives:• To understand how to access instance fields and local
variables • To appreciate the importance of documentation comments
Bell Work – 9/22/16:When you run the BankAccountTester program, how many objects of class BankAccount are constructed? How many objects of type BankAccountTester?
Agenda:• Finish Chapter 3 notes.• Continue working on Chapter 3 programming assignments.
Objectives:• To understand how to access instance fields and local
variables • To appreciate the importance of documentation comments
• Unit Testing is testing in isolation. This testing verifies that a class works correctly, outside a complete program.
• To test a class, use:1. an environment for interactive testing (like BlueJ), or2. write a tester class.
1. A test class is a class with a main method that contains statements to test another class.
2. It Typically carries out the following steps: • Construct one or more objects of the class that is being tested • Invoke one or more methods (we will test ALL methods)• Print out one or more results (we will print out the results from
each method we test)• Print the expected values
Continued
Unit Test
01: /**02: A class to test the BankAccount class.03: */04: public class BankAccountTester05: {06: /**07: Tests the methods of the BankAccount class.08: @param args not used09: */10: public static void main(String[] args)11: {12: BankAccount harrysChecking = new BankAccount();13: harrysChecking.deposit(2000);14: harrysChecking.withdraw(500);15: System.out.println(“Harry’s Balance: “ +
harrysChecking.getBalance());16: System.out.println("Expected: 1500.00"); 17: }18: }
Output:Harry’s Balance: 1500.00 Expected: 1500.00
BankAccountTester.java
Categories of Variables
Categories of variables Instance fields (balance in BankAccount) Local variables (newBalance in deposit
method) Parameter variables (amount in deposit
method) An instance field belongs to an object The fields stay alive until no method uses the
object any longer
Categories of Variables
In Java, the garbage collector periodically reclaims objects when they are no longer used
Local and parameter variables belong to a method
Instance fields are initialized to a default value, but you must initialize local variables
Lifetime of Variables
In main method:harrysChecking.deposit(500);
In deposit method:double newBalance = balance + amount;balance = newBalance;
Continued…
Lifetime of Variables
Figure 7: Lifetime of Variables Continued…
Lifetime of Variables
Figure 7: Lifetime of Variables
Self Check
13. What do local variables and parameter variables have in common? In which essential aspect do they differ?
Ans:Variables of both categories belong to methods–they come alive when the method is called, and they die when the method exits. They differ in their initialization. Parameter variables are initialized with the call values; local variables must be explicitly initialized.
01: /**02: A class to test the BankAccount class.03: */04: public class BankAccountTester05: {06: /**07: Tests the methods of the BankAccount class.08: @param args not used09: */10: public static void main(String[] args)11: {12: BankAccount harrysChecking = new BankAccount();13: harrysChecking.deposit(2000);14: harrysChecking.withdraw(500);15: System.out.println((“Harry’s Balance: “ +
harrysChecking.getBalance());16: System.out.println("Expected: 1500"); 17: }18: }
Output:Harry’s Balance: 1500 Expected: 1500
BankAccountTester.java Refer to this slide in next Self-Check question. (and the BankAccount class on the board)
Self Check Continued…14. During execution of the BankAccountTester
program in the preceding section, how many instance fields, local variables, and parameter variables were created, and what were their names?
Ans: One instance field, named balance. Three local variables, one named harrysCheckingand two named newBalance (in the depositand withdraw methods); two parameter variables, both named amount (in the depositand withdraw methods).
Implicit and Explicit Method Parameters
The implicit parameter of a method is the object on which the method is invoked
harrysChecking.deposit(500);
Implicit and Explicit Method Parameters
Use of an instance field name in a method denotes the instance field of the implicit parameter
public void withdraw(double amount){
double newBalance = balance - amount;balance = newBalance;
}
Implicit and Explicit Method Parameters
balance is the balance of the object to the left of the dot:
means double newBalance = momsSavings.balance - amount;momsSavings.balance = newBalance;
momsSavings.withdraw(500)
Implicit Parameters and this Every method has one implicit parameter The implicit parameter is always called this Exception: Static methods do not have an
implicit parameter (more in Chapter 8)
double newBalance = balance + amount;// actually meansdouble newBalance = this.balance + amount;
Implicit Parameters and this
When you refer to an instance field in a method, the compiler automatically applies it to the this parameter momsSavings.deposit(500);
Implicit Parameters and this
Figure 8:The Implicit Parameter of a Method Call
Self Check
15. How many implicit and explicit parameters does the withdraw method of the BankAccount class have, and what are their names and types?
Ans:One implicit parameter, called this, of type BankAccount, and one explicit parameter, called amount, of type double.
Self Check Continued…
16. In the deposit method, what is the meaning of this.amount? Or, if the expression has no meaning, why not?
Ans:It is not a legal expression. this is of type BankAccount and the BankAccountclass has no field named amount.
01: /**02: A class to test the BankAccount class.03: */04: public class BankAccountTester05: {06: /**07: Tests the methods of the BankAccount class.08: @param args not used09: */10: public static void main(String[] args)11: {12: BankAccount harrysChecking = new BankAccount();13: harrysChecking.deposit(2000);14: harrysChecking.withdraw(500);15: System.out.println(harrysChecking.getBalance());16: System.out.println("Expected: 1500"); 17: }18: }
Output:1500 Expected: 1500
BankAccountTester.java Refer to this slide in next Self-Check question. (and the BankAccount class on the board)
Self Check Continued…
17. How many implicit and explicit parameters does the main method of the BankAccountTester class have, and what are they called?
Ans: No implicit parameter – the method is static – and one explicit parameter, called args.
Assignment
Written Exercises Due as per your syllabus R3.1-3.12
Programming Exercises Due as per your syllabus P3.1 – 3.4, 3.6, and 3.7(Remember – do 3.1 and 3.2 as one program)
Programming Project 3.1 Due as per your syllabus
Bell Work – 9/22/16:Write the 2 constructors for a class called GasPump that has variables gallons and cost per gallon. The first constructor should be the default constructor, and the second should receive two explicit parameters, gallons and cost per gallon.
Agenda:• Continue working on Chapter 3 programming assignments.• On Monday, we will review exercises R3.1-R3.12, which
you should have already done.
Objectives:• To understand how to access instance fields and local
variables • To appreciate the importance of documentation comments
Things to Consider
• For your programs in Chapter 3– You will need to construct a class file as well as a main tester file. Both should be created under the same project.
– Don’t crowd your code – use proper indentation and add comments to explain what is happening.
– For prog 3.1 and 3.2 – do in the same prog, but show all outputs.
– You should not be using static methods except for the main method.
Things to Consider• More items
– Create both the class and main file codes. Your output should contain expected values as well. Upload .java files to student Completed Works folder.
– When showing output – do not change anything to make it look better. If it is not correct, you need to adjust your code.
– You should be able to code everything using the skills learned in chapters 1‐3. If you use anything outside this, make sure you can explain it to me.
Things to Consider
• More yet –– Project 3‐1
• Remember – any tester class you create must test all constructors and methods.
• Create two objects for the first part, create output testing each of the methods and constructors.
• For the second part, add to the existing code – create a new object that will show at least three months worth of transactions.
• Your class should be able to accept any number of free transactions before applying the monthly charge.
• Separate your outputs to make it easier to read by including blank lines or +++++++ or ===========.
Bell Work – 9/26/16:Find all of the errors in the following code (8 errors):public class SodaMachine{ private int numberOfSodas;
private int costPerSoda;private string typeOfSoda;
public SodaMachine (int nos, int cps, String tos);nos = numberOfSodas;costPerSode = cps;typeOfSoda = tpstotalCost = costPerSoda * numberOfSodas;
}}
Agenda:• Continue working on Chapter 3 programming assignments.
Objectives:• Understand how to implement classes.
Bell Work – 9/27/16:Find all of the errors in the following code (4 errors, 1 huge):public class fixMe{ private int numberOfItems;
private String fixType;
public void getType(){
return fixType;}public void calculate(int items);{
costPerItem = items / numberOfItems;}
}
Agenda: Field Trip – 10/20!!!• Continue working on Chapter 3 programming assignments.
Objectives:• Understand how to implement classes.
Bell Work – 9/28/16:No Bell Work
• Chapter 3 assignments due Tuesday.• You will have today and tomorrow in class to finish them;
after that you’re on your own time.• Review Friday• Test Tuesday and Wednesday next week.
Agenda: Field Trip – 10/20!!!• Continue working on Chapter 3 programming assignments.
Objectives:• Understand how to implement classes.
Bell Work – 9/29/16:No Bell Work
• Chapter 3 assignments due Tuesday.• You will have today in class to finish them; after that
you’re on your own time.• Review Friday• Test Tuesday and Wednesday next week.
Agenda: Field Trip – 10/20!!!• Continue working on Chapter 3 programming assignments.
Objectives:• Understand how to implement classes.
Bell Work – 9/30/16:1) What 5 things define a method?
2) What is the public interface of a class?
3) What are the 3 types of variables and where do they belong?
4) What is garbage collection?
Agenda: Field Trip – 10/20!!!• Chapter 3 assignments due Tuesday.• Review today• Test Tuesday and Wednesday next week.
Objectives:• Understand how to implement classes.
Topics for Chapter 3 Test• Levels of Abstraction – Black Boxes• Specifying the Public Interface of a Class• Commenting the Public Interface• Instance Fields• Implementing Constructors and Methods• Unit Testing• Categories of Variables• Implicit and Explicit Method Parameters