Hydraulic Hoses and Couplings
DAYCO EASTMAN RUBBER HOSE PRODUCTS
LOW PRESSURE HOSE
Style C and U4Style U3 and A6Style A2 and HAWStyle B9 and B7Style B7S and TC4Style DL5 and DL6
MEDIUM PRESSURE HOSE
Style D1and T1Style T4 and GLStyle Y9 and R5Style M and D8Style MX and E7AStyle E9 and S7Style S7E and NR7Style NR7E and C2Style ST and AXStyle HFS and HR1CStyle AM and H6Style D6 and R6
HIGH PRESSURE HOSE
Style BA and BXXStyle BXP and RT2Style J4 and J4AStyle J9 and S8Style S8E and FXStyle HFS2 and HR2CStyle DT and SNK2Style F2 and HTBStyle HRK
SPIRAL WIRE REINFORCEDHOSE
Style QX and L1Style CE and M7Style M8 and CZStyle CN and N3Style NH and N6Style HT6 and N2Style H7
SPECIALTY HOSE
Style BH and BCHStyle C6 and Y1Style Y7 and W5Style HLB and HSH2Style HPC and HPSStyle P3 and S6Style S9Style S5 and HJKStyle WB and W7Style W8
HYTRON HOSE
Style TC, TNR7E,TNR7,TS7E,TS7,TS8E and TS8
SPIRAL
HOSE
GENERAL
INFORMATION
BRAIDED
HOSE
SPECIALTY
HOSE
COUPLINGS
MISC
EQUIPMENT
Low Pressure HoseWorking Pressures to 500 PSI
33
NOTE: Hose and Coupling compatabilities noted in this catalog are for reference purposes only. Dayco Eastman crimping specifications are the official guide for selecting appropriate hose and coupling combinations and determining crimper compatability.
CSAE 100R4
Applications: Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg.
Temperature Range: -40˚ F to +212˚ F
SAE/USCG Marine Listed
Tube: Nitrile
Reinforcement: Two textile braids with helix wire
Cover: Neoprene–MSHA approved
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
C12C16C20
C24C32C40
C48
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
3/4 1.25 300 1,200 5.0 49 HY 1321 1.50 250 1,000 6.0 61 HY 132
1-1/4 1.77 200 800 8.0 76 HY 132
1-1/2 2.08 150 600 10.0 114 HR 1232 2.50 100 400 12.0 122 HR 123
2-1/2 3.13 62 250 14.0 185 HR 123 CA 244
3 3.63 56 225 18.0 241 HR 123 CA 244
U4SAE 100R4
Applications: Used for suction or return line on hydraulic systems. Excellent flexibility. Vacuum 25 Inches Hg.
Temperature Range: -40˚ F to +250˚ F
SAE/USCG Marine Listed
Tube: Nitrile
Reinforcement: Textile reinforcement with helix wire
Cover: Oil and weather resistant synthetic rubber–MSHA approved
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
U412U416U420
U424U332U440U448
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
3/4 1.23 300 1,200 3.0 50 HY 132 CA 2441 1.48 250 1,000 4.0 64 HY 132 CA 244
1-1/4 1.77 200 800 5.0 87 HY 132 CA 244
1-1/2 2.05 150 600 7.0 122 HR 123 CA 2442 2.50 100 400 10.0 139 HR 123 CA 244
2 1/2 3.11 62 250 12.0 206 HR† 123 CA 2443 3.61 56 225 14.0 251 HR† 123 CA 244
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
† Requires special tooling. Contact Dayco Eastman.
SPIRAL
HOSE
Low Pressure HoseWorking Pressures to 500 PSI
GENERAL
INFORMATION
BRAIDED
HOSE
SPECIALTY
HOSE
COUPLINGS
MISC
EQUIPMENT 34
A6SAE 100R6
Applications: Used for low pressure hydraulic lines, flexiblefuel lines, power steering return lines and lubricating lines.
Temperature Range: -40˚ F to +250˚ F
SAE/USCG Marine Listed
Tube: Nitrile
Reinforcement: One textile braid
Cover: Neoprene–MSHA approved
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
A603A604A605
A606A608A610
A612
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
3/16 .44 500 2,000 2.0 7 GD†-HF 1191/4 .50 400 1,600 2.5 9 GD†-GW-HY 1325/16 .56 400 1,600 3.0 10 GD†-HY 132
3/8 .63 400 1,600 3.0 12 GD†-GW-HY 1321/2 .78 400 1,600 4.0 17 GD†-GW-HY 1325/8 .91 350 1,400 5.0 20 GD†-HF-HY 132
3/4 1.06 300 1,200 6.0 26 GD†-HY 132
U3SAE 100R4
Applications: Used for suction or return line on hydraulic systems. Excellent flexibility. Vacuum 25 Inches Hg.
Temperature Range: -40˚ F to +250˚ F
SAE/USCG Marine Listed
Tube: Nitrile
Reinforcement: Textile reinforcement with helix wire
Cover: Oil and weather resistant synthetic rubber–MSHA approved
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
U312U316U320
U324U332U340U348
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
3/4 1.25 300 1,200 3.0 51 HY 132 CA 2441 1.50 250 1,000 4.0 64 HY 132 CA 244
1-1/4 1.80 200 800 5.0 86 HY 132 CA 244
1-1/2 2.08 150 600 7.0 104 HR 123 CA 2442 2.50 100 400 10.0 116 HR 123 CA 244
2 1/2 3.13 62 250 12.0 188 HR† 123 CA 2443 3.63 56 225 14.0 226 HR† 123 CA 244
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
† Requires special tooling. Contact Dayco Eastman.
SPIRAL
HOSE
GENERAL
INFORMATION
BRAIDED
HOSE
SPECIALTY
HOSE
COUPLINGS
MISC
EQUIPMENT35
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
A2SAE 100R6
High Temperature
Applications: Used for high temperature, low pressurehydraulic lines, flexible fuel lines, power steering return lines,lubricating lines, and hot transmission lines.
Temperature Range: -40˚ F to +300˚ F
Tube: Chlorinated Polyethylene
Reinforcement: One textile braid
Cover: Chlorinated Polyethylene
PERMANENT REUSABLE
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
CatalogNumber
A204A205A206
A208A210A212
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
1/4 .50 400 1,600 2.5 10 GD†-GW-HY 1325/16 .56 400 1,600 3.0 11 GD†-HY 1323/8 .63 400 1,600 3.0 13 GD†-GW-HY-KF 132
1/2 .78 400 1,600 4.0 18 GD†-GW-HY 1325/8 .91 350 1,400 5.0 21 GD†-HF-HY 1323/4 1.09 300 1,200 6.0 31 GD†-HY 132
Low Pressure HoseWorking Pressures to 500 PSI
Applications: Used for low pressure air and water applica-tions where pressures do not exceed 250 PSI
Not recommended for use with petroleum based fluidsTemperature Range: -15˚ F to +150˚ FKA series push-on coupling is not recommended where pres-
sure and/or temperature exceeds +100˚F and 100 PSI
Tube: PVC
Reinforcement: One braid of polyester fiber
Cover: PVC, pin-pricked. Colors: Grey (all sizes); Red and Blue(sizes -04, -06 and -08)
HAWHytron® Push-On
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
HAW03HAW04HAW05
HAW06HAW08HAW12
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
3/16 .35 250 1,000 .5 4 GH†-SU 1951/4 .44 250 1,000 .6 6 HY-KF 132 KA 2195/16 .50 250 1,000 .8 8 HY-KF 132 KA 219
3/8 .63 250 1,000 .9 11 HY-KF 132 KA 2191/2 .78 250 1,000 1.2 16 HY-KF 132 KA 2193/4 1.10 250 1,000 2.5 28 GD†-HY 132 KA 219
† Requires special tooling. Contact Dayco Eastman.
SPIRAL
HOSE
GENERAL
INFORMATION
BRAIDED
HOSE
SPECIALTY
HOSE
COUPLINGS
MISC
EQUIPMENT 36
Low Pressure HoseWorking Pressures to 500 PSI
Applications: Used for low pressure transmission of oil, gaso-line, air, water, coolants, etc. Should not be used on impulseapplications
Temperature Range: -40˚F to +212˚F-40˚F to +160˚F for gaseous applications
**NOTE: Do not exceed 250 PSI working pressure whenusing KA style push-on couplings.
Tube: Nitrile
Reinforcement: One textile braid (except B716 is four spiral layers)
Cover: Black oil and weather resistant synthetic rubber –MSHA approved
B7Push-On Low Pressure PERMANENT REUSABLE
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
CatalogNumber
B703B704B705
B706B708B710B716
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
3/16 .36 400 1,600 1.0 4 GH†-KF 2221/4 .50 375 1,500 3.0 9 GD†-HY-KF 132 KA 2195/16 .56 300 1,200 3.0 10 GD†-HY-KF 132 KA 219
3/8 .62 300 1,200 3.0 11 GD†-HY-KF 132 KA 2191/2 .75 300 1,200 5.0 15 GD†-HY-KF 132 KA 2195/8 .91 300 1,200 6.0 20 GD†-HY-KF 132 KA 2191 1.44 300 1,200 8.0 26 HY 132
Applications: Used for low pressure transmission of gaso-line, oil, air, water and coolants where operation pressures donot exceed 250 PSI
Temperature Range: -40˚F to +200˚F(130˚F maximum with water)
KA series push-on coupling is not recommended where pres-sure and/or temperature exceeds +100˚F and 100 PSI
Tube: Red polyurethane
Reinforcement: One braid of polyester fiber
Cover: Red abrasion resistant polyurethane
B9Hytron® Push-On
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
B903B904B905
B906B908B910
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
3/16 .38 250 1,000 1.0 4 GH†-KF 2221/4 .45 250 1,000 1.5 5 KF 222 KA 2195/16 .54 250 1,000 2.0 8 KF 222 KA 219
3/8 .63 250 1,000 3.0 9 GD†-KF 222 KA 2191/2 .77 250 1,000 3.0 13 KF 222 KA 2195/8 .92 250 1,000 4.0 20 KF 222 KA 219
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
† Requires special tooling. Contact Dayco Eastman.
SPIRAL
HOSE
GENERAL
INFORMATION
BRAIDED
HOSE
SPECIALTY
HOSE
COUPLINGS
MISC
EQUIPMENT37
Applications: Used for low pressure transmission of oil, gasoline, air, water, coolants, etc. Should not be used onimpulse applicationsTemperature Range: -40˚ F to +212˚ FNote: Do not exceed 250 PSI working pressure whenusing KA push-on couplings.
Tube: Nitrile
Reinforcement: One textile braid
Cover: Oil and weather resistant synthetic rubber–MSHA approved**Colors: Black–BK Green–GN
Gray–GY Red–RDOff White–WH Yellow–YLBlue–BL Brown–BR
B7SAbrasion King® Push-On
Low Pressure Silicone FreePERMANENT REUSABLE
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
CatalogNumber
B7S04**B7S06**B7S08**
B7S10**B7S12**
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
1/4 .49 300 1,200 2.5 9 GD†-HY-KF 132 KA 2193/8 .62 300 1,200 3.0 11 GD†-HY-KF 132 KA 2191/2 .75 300 1,200 5.0 15 GD†-HY-KF 132 KA 219
5/8 .91 300 1,200 6.0 19 GD†-HY-KF 132 KA 2193/4 1.03 300 1,200 7.0 23 GD†-HY-KF 132 KA 219
Low Pressure HoseWorking Pressures to 500 PSI
Applications: Used for low pressure transmission of oil, gaso-line, air, water, coolants, etc. where operating pressures donot exceed 250 PSI. Should not be used on impulse applica-tions.
Temperature Range: -40˚ F to +200˚ F-40˚ F to +160˚ F (for gaseous applications)
Tube: Nitrile
Reinforcement: One textile braid
Cover: Impregnated textile braid, oil and mildew resistant
TC4Push-On Low Pressure PERMANENT REUSABLE
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
CatalogNumber
TC404TC405TC406
TC408TC410TC412
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
1/4 .50 250 1,000 3.0 9 KF 222 KA 2195/16 .54 250 1,000 3.0 9 KF 222 KA 2193/8 .63 250 1,000 3.0 10 KF 222 KA 219
1/2 .75 250 1,000 5.0 14 KF 222 KA 2195/8 .91 250 1,000 6.0 19 KF 222 KA 2193/4 1.03 250 1,000 7.0 23 KF 222 KA 219
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
† Requires special tooling. Contact Dayco Eastman.
SPIRAL
HOSE
GENERAL
INFORMATION
BRAIDED
HOSE
SPECIALTY
HOSE
COUPLINGS
MISC
EQUIPMENT 38
Low Pressure HoseWorking Pressures to 500 PSI
Applications: Used for low pressure transmission of oil, gaso-line, air and water.
Temperature Range: -40˚ F to +212˚ F
NOTE: -12 and -16 are similar to SAE 30R2,T2
Tube: Nitrile
Reinforcement: One textile braid**Two textile braids
Cover: Oil and weather resistant synthetic rubber–MSHA approved -03, -04, -05, -12 and -16 only
DL6SAE Fuel Line Hose PERMANENT REUSABLE
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
CatalogNumber
DL603DL604DL605
DL606DL608DL610
DL612**DL616**
Max. Min. Min.Working Burst Bend Per SAE
I.D. O.D. Pressure Pressure* Radius 100 Ft. SPEC(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
3/16 .36 500 2,000 2.5 5 KF 222 30R31/4 .42 400 1,600 2.7 6 KF 222 30R35/16 .52 300 1,200 3.0 8 KF 222 30R3
3/8 .60 300 1,200 4.0 11 KF 222 30R2,T11/2 .75 300 1,200 4.5 16 KF 222 30R2,T15/8 .88 300 1,200 5.0 19 KF 222 30R2,T1
3/4 1.22 300 1,200 6.0 46 KF 222 30R2,T21 1.52 300 1,200 8.0 66 HY 132 30R2,T2
Applications: Low pressure fuel and oil hose for use withgasoline and diesel fuel, lube oil and related vapors
Temperature Range: -40˚ F to +250˚ F
Tube: Nitrile
Reinforcement: One textile braid
Cover: Oil and weather resistant synthetic rubber
DL5SAE 30R7 Fuel Line PERMANENT REUSABLE
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
CatalogNumber
DL503DL504DL505
DL506DL508
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
3/16 .41 50 250 2.0 7 KF 2221/4 .50 50 250 2.5 9 GD†-KF 2225/16 .56 50 250 2.8 11 KF 222
3/8 .63 50 250 3.0 12 GD†-KF 2221/2 .78 35 175 4.0 17 GD†-KF 222
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
† Requires special tooling. Contact Dayco Eastman.
SPIRAL
HOSE
GENERAL
INFORMATION
BRAIDED
HOSE
SPECIALTY
HOSE
COUPLINGS
MISC
EQUIPMENT
Medium Pressure HoseWorking Pressures to 3,000 PSI
39
D1SAE 100R3
Applications: Used in medium pressure hydraulic systems,pneumatic applications and many specialty services
Temperature Range: -40˚ F to +212˚ F
SAE/USCG Marine Listed
Tube: Neoprene
Reinforcement: Two textile braids
Cover: Neoprene–MSHA approved
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
D104D106D108
D112D116D120
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
1/4 .58 1,250 5,000 3.0 13 GF†-GW-HY 132 BE 2313/8 .75 1,125 4,500 4.0 21 GF†-GW-HY 132 BE 2311/2 .94 1,000 4,000 5.0 30 GH-GW-HY09 132 BE-CA 231
3/4 1.25 750 3,000 6.0 47 GF-HY 132 BE-CA 2311 1.50 565 2,250 8.0 57 HY 132 BE-CA 231
1-1/4 1.75 375 1,500 10.0 73 HY 132 CA 244
Applications: For use with corrosive and/or high temperaturefluids
Temperature Range: -65˚ F to + 450˚ FFor steam, the maximum operating pressure is 200 PSI at 388˚ F
Not recommended for fuel applications–see T4
Tube: White extruded Teflon®; smooth boreMeets FDA requirements
Reinforcement and Cover: One braid of high tensile stainlesssteel wire
T1SAE 100R14A PERMANENT REUSABLE
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
CatalogNumber
T104T105T106
T108T110T112
T116
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
3/16 .30 1,500 10,000 2.0 8 GS-HT 2121/4 .37 1,500 9,000 3.0 10 GS-HT 2125/16 .43 1,500 8,000 4.0 11 GS-HT 212
13/32 .54 1,000 6,000 5.3 12 GS-HT 2121/2 .63 800 6,000 6.5 15 GS-HT 212
7/8 1.03 800 3,500 9.0 27 GS-HT 212
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
† Requires special tooling. Contact Dayco Eastman.
SPIRAL
HOSE
Medium Pressure HoseWorking Pressures to 3,000 PSI
GENERAL
INFORMATION
BRAIDED
HOSE
SPECIALTY
HOSE
COUPLINGS
MISC
EQUIPMENT 40
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
GLSAE J1402
Type AI and DOT FMVSS-106
Applications: Used for high temperature truck and bus appli-cations, diesel fuel, gasoline, hot oil, air brakes andhydraulics.
Temperature Range: -40˚ F to +300˚ F
SAE/USCG Marine Listed
Tube: Chlorinated polyethylene
Reinforcement: Textile inner braid and a high tensile steel wirebraid
Cover: Oil and mildew resistant black textile braid
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
GL04GL05GL06
GL08GL10GL12
GL16GL20
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
3/16 .49 1,500 6,000 3.0 11 HF03 119 GL** 2481/4 .55 1,500 6,000 3.4 13 HY04 132 GL** 2485/16 .62 1,500 6,000 4.0 15 HY05 132 GL** 248
13/32 .74 1,250 5,000 4.6 19 HY07** 132 GL** 2481/2 .83 1,000 4,000 5.5 21 HY08** 132 GL** 2485/8 .96 750 3,000 6.5 26 HY10** 132 GL** 248
7/8 1.21 400 1,600 7.4 34 HY14 132 GL 2481-1/8 1.49 300 1,250 9.0 45 HY18 132 GL 248
Applications: For use with fuels and corrosive and/or hightemperature fluids where static electricity may be generated.
Temperature Range: -65˚ F to +450˚ FFor steam, the maximum operating pressure is 200 PSI at 388˚ F
Tube: Black conductive extruded Teflon®; smooth bore
Reinforcement and Cover: One braid of high tensile stainlesssteel wire
T4SAE 100R14B PERMANENT REUSABLE
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
CatalogNumber
T404T405T406
T408T410T412
T416
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
3/16 .30 1,500 10,000 2.0 8 GS-HT 2121/4 .37 1,500 9,000 3.0 10 GS-HT 2125/16 .43 1,500 8,000 4.0 11 GS-HT 212
13/32 .54 1,000 6,000 5.3 12 GS-HT 2121/2 .63 800 6,000 6.5 15 GS-HT 2125/8 .76 800 5,000 7.8 17 GS-HT 212
7/8 1.03 800 3,500 9.0 27 GS-HT 212
**Suitable for SAE J1402, Type AI and FMVSS-106 assemblies.
SPIRAL
HOSE
GENERAL
INFORMATION
BRAIDED
HOSE
SPECIALTY
HOSE
COUPLINGS
MISC
EQUIPMENT
Medium Pressure HoseWorking Pressures to 3,000 PSI
41
Y9SAE 100R5, SAE J1402
Type AII and DOT FMVSS-106
Applications: Used for high temperature, medium pressurehydraulic applications on material handling equipment, off-the-road equipment, machine tools and other air, water, or oil service.
Temperature Range: -40˚ F to +212˚ F (Intermittent +300˚ F)(Continuous use at maximum temperature and maximumoperating pressure will affect service life)
SAE/USCG Marine Listed
Tube: Oil resistant synthetic rubber
Reinforcement: Textile inner braid and a high tensile steel wirebraid
Cover: Oil and mildew resistant black textile braid
†Suitable for SAE J1402, Type AII, and FMVSS-106 assemblies.
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
Y904Y905Y906
Y908Y910Y912
Y916Y920Y924
Y932
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
3/16 .52 3,000 12,000 3.0 14 HF03 119 BN† 2371/4 .58 3,000 12,000 3.4 18 HY04 132 BN† 2375/16 .68 2,250 9,000 4.0 23 HY05 132 BN† 237
13/32 .77 2,000 8,000 4.6 26 HY07† 132 BN† 2371/2 .92 1,750 7,000 5.5 36 HY09† 132 BN† 2375/8 1.08 1,500 6,000 6.5 44 HY10† 132 BN† 237
7/8 1.23 800 3,000 7.4 46 HY14 132 BN 2371-1/8 1.50 625 2,500 9.0 53 HY18 132 BQ 2411-3/8 1.75 500 2,000 10.5 62 HY22 132 BQ 241
1-13/16 2.22 350 1,400 13.3 84 HY29 132 BQ 241
Applications: For medium pressure applications that requirea nylon tube
Temperature Range: -40˚ F to +200˚ F
Tube: Nylon
Reinforcement: One braid of polyester fiber
Cover: Black abrasion resistant polyurethane (pin-pricked)
R5Hytron® Nylon Tube
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
R503R504
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
3/16 .37 2,000 8,000 .8 4 CY-SU 195 BU 2421/4 .46 1,875 7,500 1.3 6 CY-SU 195 BU 242
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
† Requires special tooling. Contact Dayco Eastman.
SPIRAL
HOSE
Medium Pressure HoseWorking Pressures to 3,000 PSI
GENERAL
INFORMATION
BRAIDED
HOSE
SPECIALTY
HOSE
COUPLINGS
MISC
EQUIPMENT 42
D8SAE 100R1A
High Temperature
Applications: Used for medium pressure hydraulic lines onmobile equipment, machine tools and farm implements
Temperature Range: -40˚ F to +275˚ F
SAE/USCG Marine Listed (D803 through D816)
Tube: Oil resistant synthetic rubber
Reinforcement: One braid of high tensile steel wire
Cover: Oil resistant synthetic rubber–MSHA approved
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
D803D804D805
D806D808D810
D812D816D820
D824D832
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
3/16 .50 3,000 12,000 3.5 14 GB† 971/4 .63 2,750 11,000 4.0 21 GB† 97 CB 2475/16 .69 2,500 10,000 4.5 24 CH†† -
3/8 .78 2,250 9,000 5.0 31 BW-GB† 81 CB 2471/2 .91 2,000 8,000 7.0 38 BW-GB† 81 CB 2475/8 1.03 1,500 6,000 8.0 44 GB†-HF 97
3/4 1.19 1,250 5,000 9.5 55 BW-GB† 81 CB 2471 1.50 1,000 4,000 12.0 76 BW 81 CB 247
1-1/4 1.81 625 2,500 16.5 103 BW 81 CA 24481
1-1/2 2.06 500 2,000 20.0 121 BW 81 CA 2442 2.63 375 1,500 25.0 171 BW 81 CA 244
Applications: Used for medium pressure hydraulic lines onmobile equipment, machine tools and farm machinery.
Temperature Range: -40˚ F to +212˚ F
SAE/USCG Marine Listed
Tube: Oil resistant synthetic rubber
Reinforcement: One braid of high tensile steel wire
Cover: Oil and weather resistant synthetic rubber–MSHA approved
MSAE 100R1A
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
M03M04M06
M08M10M12
M16M20M24
M32
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
3/16 .49 3,000 12,000 3.5 14 GB† 971/4 .61 2,750 11,000 4.0 21 GW 1143/8 .77 2,250 9,000 5.0 31 BW-GW 114
1/2 .89 2,000 8,000 7.0 38 BW-GW 1145/8 1.02 1,500 6,000 8.0 44 BC† 793/4 1.17 1,250 5,000 9.5 55 BW 81
1 1.48 1,000 4,000 12.0 76 BW 811-1/4 1.80 625 2,500 16.5 103 BW 811-1/2 2.06 500 2,000 20.0 121 BC-BW 81
2 2.60 375 1,500 25.0 171 BC-BW 81
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
† Requires special tooling. Contact Dayco Eastman.†† Factory Assembly Only.
SPIRAL
HOSE
GENERAL
INFORMATION
BRAIDED
HOSE
SPECIALTY
HOSE
COUPLINGS
MISC
EQUIPMENT
Medium Pressure HoseWorking Pressures to 3,000 PSI
43
Applications: Used for medium pressure hydraulic lines onmobile equipment, machine tools and farm machinery.
Temperature Range: -40˚ F to +212˚ F
SAE/USCG Marine Listed (except MX05 and MX10)
Tube: Oil resistant synthetic rubber
Reinforcement: One braid of high tensile steel wire
Cover: Oil and weather resistant synthetic rubber–MSHA approved
MXSAE 100R1AT
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
MX03MX04
MX05MX06
MX08
MX10MX12
MX16MX20MX24MX32
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page Series Page
# #
3/16 .47 3,000 12,000 3.5 13 GB†-HF 1191/4 .53 2,750 11,000 4.0 16 GB†-GW-HY 132 BA 227
5/16 .59 2,500 10,000 4.5 19 HY 1323/8 .69 2,250 9,000 5.0 25 BW-GB†-GW-HY 132 BA 227
1/2 .81 2,000 8,000 7.0 29 BW-GB†-GW-HY 132 BA 227
5/8 .94 1,500 6,000 8.0 36 HY 1323/4 1.09 1,250 5,000 9.5 44 BW-GB†-HY 132 BA 227
1 1.44 1,000 4,000 12.0 66 BW-HY 1321-1/4 1.72 625 2,500 16.5 88 BW 811-1/2 1.97 500 2,000 20.0 100 BW 81
2 2.50 375 1,500 25.0 144 BW 81
E7ASAE 100R1 Type AT
Applications: Used for medium pressure hydraulic lines onmobile equipment, machine tools and farm machinery.
Temperature Range: -40˚ F to +212˚ F
Tube: Polyester
Reinforcement: One braid of high tensile steel wire
Cover: Neoprene–MSHA approved
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
E704AE706AE708A
E712AE716A
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
1/4 .54 2,750 11,000 4.0 15 GB†-HY 1323/8 .70 2,250 9,000 5.0 23 GB†-HY 1321/2 .84 2,000 8,000 7.0 29 GB†-HY 132
3/4 1.10 1,250 5,000 9.5 40 GB†-HY 1321 1.40 1,000 4,000 12.0 51 HY 132
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
† Requires special tooling. Contact Dayco Eastman.
SPIRAL
HOSE
Medium Pressure HoseWorking Pressures to 3,000 PSI
GENERAL
INFORMATION
BRAIDED
HOSE
SPECIALTY
HOSE
COUPLINGS
MISC
EQUIPMENT 44
Applications: Used for medium pressure hydraulic service onagricultural equipment and machine tools
Temperature Range: -40˚ F to +200˚ F
For twin or multiple line configurations, refer to page 77
Tube: Polyester
Reinforcement: One braid of polyester fiber
Cover: Black abrasion resistant polyurethane (pin-pricked)
S7SAE 100R7
Hytron® Hose
†Requires special tooling. Contact Dayco Eastman.††SU series couplings may be swaged (with S-16 swager) or
crimped onto this hose series.
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
S702S703S704
S705S706S708
S712S716
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page Series Page
# #
1/8 .32 3,000 12,000 0.5 3 CY-GH† 923/16 .45 3,000 12,000 0.8 7 HF-SU†† 195 BG 2321/4 .50 2,750 11,000 1.3 7 CY-GH†-SU†† 195 BG 232
5/16 .58 2,500 10,000 1.8 10 CY-HY-SU†† 195 BG 2323/8 .65 2,250 9,000 2.0 11 CY-GH†-HY-SU†† 195 BG 2321/2 .82 2,000 8,000 3.0 17 GH†-HY-SU†† 195 BG 232
3/4 1.10 1,250 5,000 5.0 27 HY 1321 1.38 1,000 4,000 8.0 34 HY 132
E9SAE 100R1AT
High Temperature
Applications: Used for high temperature, medium pressurehydraulic lines on mobile equipment, machine tools and farmmachinery.
Temperature Range: -40˚ F to +275˚ F
Tube: Polyester
Reinforcement: One braid of high tensile steel wire
Cover: Neoprene–MSHA approved
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
E904E906E908
E912E916
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
1/4 .54 2,750 11,000 4.0 15 HY 1323/8 .70 2,250 9,000 5.0 23 HY 1321/2 .84 2,000 8,000 7.0 29 HY 132
3/4 1.10 1,250 5,000 9.5 40 HY 1321 1.40 1,000 4,000 12.0 51 HY 132
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
SPIRAL
HOSE
GENERAL
INFORMATION
BRAIDED
HOSE
SPECIALTY
HOSE
COUPLINGS
MISC
EQUIPMENT
Medium Pressure HoseWorking Pressures to 3,000 PSI
45
Applications: Used on medium pressure hydraulic applica-tions where a non-conductive hose is required
Temperature Range: -40˚ F to +200˚ F
For twin or multiple line configurations, refer to page 77
Tube: Natural polyester
Reinforcement: One braid of polyester fiber
Cover: Orange abrasion resistant polyurethane (non-pin-pricked)
S7ESAE 100R7
Non-Conductive Hytron® Hose
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
S7E02S7E03S7E04
S7E05S7E06S7E08
S7E12S7E16
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page Series Page
# #
1/8 .32 3,000 12,000 0.5 3 CY-GH† 923/16 .45 3,000 12,000 0.8 7 HF-SU†† 195 BG 2421/4 .50 2,750 11,000 1.3 7 CY-GH†-HY-SU†† 195 BG 242
5/16 .58 2,500 10,000 1.8 10 CY-HY-SU†† 195 BG 2423/8 .65 2,250 9,000 2.0 11 CY-GH†-HY 132 BG 2421/2 .82 2,000 8,000 3.0 17 GH†-HY-SU†† 192 BG 242
3/4 1.10 1,250 5,000 5.0 27 HY 1321 1.38 1,000 4,000 8.0 34 HY 132
Applications: Used on medium pressure hydraulic systemswhich require a nylon tube
Temperature Range: -40˚ F to +200˚ FFor twin or multiple line configurations, refer to page 77
Tube: Nylon
Reinforcement: One braid of polyester fiber
Cover: Black abrasion resistant polyurethane (pin-pricked)
NR7SAE 100R7 (Nylon Tube)
Hytron® Hose
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
NR702NR703NR704
NR705NR706NR708
NR712NR716
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page Series Page
# #
1/8 .32 3,000 12,000 0.5 3 CY 92 BU 2423/16 .45 3,000 12,000 0.8 7 HF-SU†† 195 BG 2321/4 .50 2,750 11,000 1.3 7 CY-GW-HY-SU†† 195 BG 232
5/16 .58 2,500 10,000 1.8 9 GW-HY-SU†† 195 BG 2323/8 .65 2,250 9,000 2.0 11 GW-HY-SU†† 195 BG 2321/2 .82 2,000 8,000 3.0 17 GH†-HY-SU†† 195 BG 232
3/4 1.11 1,250 5,000 5.0 27 HY 1321 1.38 1,000 4,000 8.0 34 HY 132
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
† Requires special tooling. Contact Dayco Eastman.†† Series couplings may be swaged (with S-16 swager)
or crimped onto this hose series.
SPIRAL
HOSE
Medium Pressure HoseWorking Pressures to 3,000 PSI
GENERAL
INFORMATION
BRAIDED
HOSE
SPECIALTY
HOSE
COUPLINGS
MISC
EQUIPMENT 46
Applications: Used with medium pressure and low tempera-ture hydraulic applications, such as lift trucks in cold environ-ments.
Temperature Range: -70˚ F to +200˚ FFor twin or multiple line configurations refer to page 77
Tube: Polyester
Reinforcement: One braid of polyester fiber
Cover: Black abrasion resistant polyester (pin-pricked)
C2Low Temperature Hytron® Hose
Exceeds SAE 100R7
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
C204C205C206
C208C212
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page Series Page
# #
1/4 .52 2,750 11,000 1.3 8 CY-GH†-HY-SU 195 BG 2325/16 .58 2,500 10,000 1.8 10 CY-HY-SU 195 BG 2323/8 .65 2,250 9,000 2.0 11 CY-GH†-HY-SU 195 BG 232
1/2 .82 2,000 8,000 3.0 17 GH†-HY-SU 1953/4 1.10 1,250 5,000 5.0 24 HY 132
Applications: Used on medium pressure hydraulic systemswhich require a non-conductive hose and a nylon tube
Temperature Range: -40˚ F to +200˚ FFor twin or multiple line configurations, refer to page 77
Tube: Natural nylon
Reinforcement: One braid of polyester fiber
Cover: Orange abrasion resistant polyurethane (non-pin-pricked)
NR7ESAE 100R7 (Nylon Tube)
Non-Conductive Hytron® Hose
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
NR7E02NR7E03NR7E04
NR7E05NR7E06NR7E08
NR7E12NR7E16
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page Series Page
# #
1/8 .32 3,000 12,000 0.5 3 CY 92 BU 2423/16 .45 3,000 12,000 0.8 7 HF-SU†† 195 BG 2321/4 .50 2,750 11,000 1.3 7 CY-HY-SU†† 195 BG 232
5/16 .58 2,500 10,000 1.8 9 HY-SU†† 195 BG 2323/8 .65 2,250 9,000 2.0 11 HY-SU†† 195 BG 2321/2 .82 2,000 8,000 3.0 17 GH†-HY-SU†† 195 BG 232
3/4 1.11 1,250 5,000 5.0 27 HY 1321 1.38 1,000 4,000 8.0 34 HY 132
†† SU series couplings may be swaged (with S-16 swager) or crimped onto this hose series.
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
† Requires special tooling. Contact Dayco Eastman.
SPIRAL
HOSE
GENERAL
INFORMATION
BRAIDED
HOSE
SPECIALTY
HOSE
COUPLINGS
MISC
EQUIPMENT
Medium Pressure HoseWorking Pressures to 3,000 PSI
47
ST Blue Lightning®
Exceeds SAE 100R1ATHigh Temperature
Applications: Used for petroleum based and fire resistant fluids. Fire resis-tant fluids may have limitations and should be discussed with DaycoEastman Applications Engineering DepartmentTemperature Range: -40˚ F to +300˚ F (Petroleum based fluids**)
-40˚ F to +250˚ F (Water/Oil emulsions)-40˚ F to +250˚ F (Water/Glycol solutions)-40˚ F to +180˚ F (Phosphate Ester fluids)
**Use fluid manufacturer’s recommendationsSAE/USCG Marine Listed
Tube: Chlorinated polyethylene
Reinforcement: One braid of high tensile steel wire
Cover: Oil, ozone and abrasion resistant blue synthetic rubber–MSHA approved.
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
ST04ST06ST08
ST12ST16
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
1/4 .53 2,750 11,000 4.0 16 GW-HY 1323/8 .67 2,250 9,000 5.0 24 BW-GW-HY 1321/2 .80 2,000 8,000 7.0 29 BW-GW-HY 132
3/4 1.09 1,250 5,000 9.5 43 BW-HY 1321 1.41 1,000 4,000 12.0 66 BW-HY 132
AX E-Z Flex® 150Exceeds
SAE 100R1AT
Applications: Used for medium pressure hydraulic lines onmobile equipment, machine tools and farm machinery. Moreflexible, higher WP and higher temperature range than SAE 100R1
Temperature Range: -40˚ F to +250˚ F
SAE/USCG Marine Listed
Tube: Neoprene
Reinforcement: One braid of high tensile steel wire
Cover: Oil and weather resistant synthetic rubber–MSHA approved
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
AX04AX06AX08
AX10AX12AX16
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
1/4 .50 3,000 12,000 1.5 14 GW-HY 1323/8 .62 3,000 12,000 2.0 18 GW-HY 1321/2 .75 2,500 10,000 3.0 22 GW-HY 132
5/8 .88 1,500 6,000 3.5 29 HY 1323/4 1.01 1,250 5,000 4.3 31 HY 1321 1.29 1,000 4,000 5.5 40 HY 132
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
† Requires special tooling. Contact Dayco Eastman.
SPIRAL
HOSE
Medium Pressure HoseWorking Pressures to 3,000 PSI
GENERAL
INFORMATION
BRAIDED
HOSE
SPECIALTY
HOSE
COUPLINGS
MISC
EQUIPMENT 48
HR1C Farmex®
Exceeds SAE 100R1AT
Applications: Used for high temperature, medium pressurehydraulic applications on farm machinery
Temperature Range: -40˚ F to +250˚ F
SAE/USCG Marine Listed
Tube: Polyester
Reinforcement: One braid of high tensile steel wire
Cover: Neoprene–MSHA approved
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
HR1C04HR1C06HR1C08
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
1/4 .50 3,000 12,000 2.0 12 GB†-HY 132 BA3/8 .66 2,500 10,000 2.5 19 GB†-HY 132 BA1/2 .77 2,500 10,000 3.5 25 GB†-HY 132 BA
HFS Firescreen®
Exceeds SAE 100R1AT
Applications: Used for high temperature, medium pressurehydraulic lines on mobile equipment, machine tools and farmmachinery.
Temperature Range: -40˚ F to +250˚ F
SAE/USCG Marine Listed
Tube: Polyester
Reinforcement: One braid of high tensile steel wire
Cover: Neoprene–MSHA approved
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
HFS04HFS05HFS06
HFS08HFS12HFS16
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
1/4 .50 3,000 12,000 2.0 12 GB†-HY 132 BA5/16 .58 3,000 12,000 2.3 17 HY 1323/8 .66 2,500 10,000 2.5 19 GB†-HY 132 BA
1/2 .77 2,500 10,000 3.5 25 GB†-HY 132 BA3/4 1.05 1,500 6,000 5.0 37 HY 1321 1.35 1,250 5,000 10.0 53 HY 132
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
† Requires special tooling. Contact Dayco Eastman.
SPIRAL
HOSE
GENERAL
INFORMATION
BRAIDED
HOSE
SPECIALTY
HOSE
COUPLINGS
MISC
EQUIPMENT
Medium Pressure HoseWorking Pressures to 3,000 PSI
49
AM E-Z Flex® PlusExceeds SAE 100R17
Applications: Used in timber processing and handling, agri-cultural, and construction industries requiring an extra toughrubber cover for abrasion resistant applications.
Temperature Range: -40˚ F to +250˚ F
SAE/USCG Marine Listed
Tube: Neoprene
Reinforcement: One braid of high tensile steel wire** Two braids of high tensile steel wire
Cover: Abrasion resistant Neoprene–MSHA approved
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
AM04AM06AM08
AM10**AM12**AM16**
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
1/4 .50 3,000 12,000 1.5 14 GW-HY 1323/8 .63 3,000 12,000 2.0 19 GW-HY 1321/2 .78 3,000 12,000 3.5 27 GW-HY 132
5/8 .93 3,000 12,000 4.0 43 HY 1323/4 1.14 3,000 12,000 4.8 65 BW-HY 1321 1.48 3,000 12,000 6.0 108 BW 81
Applications: For use on medium pressure hydraulic applica-tions at low and high temperatures. Polyester cover providesexcellent abrasion resistance.
Temperature Range: -70˚ F to +250˚ F (H604 through H608)-50˚ F to +250˚ F (H610 and H612)
Tube: Polyester
Reinforcement: One braid of high tensile steel wire** Two braids of high tensile steel wire
Cover: Polyester
H63,000 PSI Working Pressure
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
H604H605H606
H608H610**H612**
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
1/4 .48 3,000 12,000 2.0 12 GB-HY 1325/16 .55 3,000 12,000 2.3 14 HY 1323/8 .64 3,000 12,000 2.5 19 GB-HY 132
1/2 .77 3,000 12,000 3.5 29 GB-HY 1325/8 .99 3,000 12,000 4.0 47 HF 1193/4 1.16 3,000 12,000 4.8 69 HY 132
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
† Requires special tooling. Contact Dayco Eastman.
SPIRAL
HOSE
Medium Pressure HoseWorking Pressures to 3,000 PSI
GENERAL
INFORMATION
BRAIDED
HOSE
SPECIALTY
HOSE
COUPLINGS
MISC
EQUIPMENT 50
R6 Abrasion King®
Meets SAE 100R17 Performance
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
R604R606R608
R610**R612**R616**
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
1/4 .51 3,000 12,000 2.0 11 CY-GH†-HY 1323/8 .69 3,000 12,000 2.5 20 GH†-HY 1321/2 .82 3,000 12,000 3.5 27 GH†-HY 132
5/8 1.07 3,000 12,000 4.0 51 HY 1323/4 1.23 3,000 12,000 4.8 71 BW-HY 1321 1.53 3,000 12,000 6.0 100 BW 81
Applications: Designed to handle abrasive applications. Usedfor medium pressure hydraulic equipment
Temperature Range: -50˚ F to +250˚ F (R604 through R610)-50˚ F to +212˚ F (R612 and R616)
Tube: Polyester
Reinforcement: One braid of high tensile steel wire** Two braids of high tensile steel wire
Cover: Black abrasion resistant nylon yarn with one blue plait foridentification
D6Exceeds SAE 100R17
Applications: Used in medium pressure hydraulic applica-tions where 3,000 PSI working pressure is required
Temperature Range: -40˚ F to +250˚ F
Tube: Polyester
Reinforcement: One braid of high tensile steel wire** Two braids of high tensile steel wire
Cover: Neoprene–MSHA approved
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
D604D605D606
D608D610**D612**
D616**
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
1/4 .50 3,000 12,000 2.0 12 GB†-HY 1325/16 .58 3,000 12,000 2.3 17 HY 1323/8 .66 3,000 12,000 2.5 23 GB†-HY 132
1/2 .80 3,000 12,000 3.5 29 GB†-HY 1325/8 1.00 3,000 12,000 4.0 47 HF-HY 1323/4 1.18 3,000 12,000 4.8 73 HY 132
1 1.48 3,000 12,000 6.0 101 HY 132
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
† Requires special tooling. Contact Dayco Eastman.
SPIRAL
HOSE
BASAE 100R2A
BXX E-Z Flex®
SAE 100R2AT
GENERAL
INFORMATION
BRAIDED
HOSE
SPECIALTY
HOSE
COUPLINGS
MISC
EQUIPMENT
High Pressure HoseWorking Pressures to 5,000 PSI
Applications: Used for high pressure hydraulic lines on off-the-road construction equipment, and machine tools, farm andmarine equipment
Temperature Range: -40˚ F to +212˚ F
SAE/USCG Marine Listed
Tube: Neoprene
Reinforcement: Two high tensile steel wire braids
Cover: Oil and weather resistant synthetic rubber–MSHA approved
Applications: Used for high pressure hydraulic lines on off-the-road construction equipment, machine tools, farm andmarine equipmentBend radius is 1/2 of the SAE requirement (through -16 size only)
Temperature Range: -40˚ F to +212˚ FSAE/USCG Marine Listed
Tube: Neoprene
Reinforcement: Two high tensile steel wire braids
Cover: Oil and weather resistant synthetic rubber–MSHA approved
51
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
BA04BA06BA08
BA10BA12BA16
BA20BA24BA32
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
1/4 .67 5,000 20,000 4.0 33 GW 1143/8 .83 4,000 16,000 5.0 45 BW-GW 1141/2 .95 3,500 14,000 7.0 54 BW-GW 114
5/8 1.08 2,750 11,000 8.0 64 BC† 793/4 1.24 2,250 9,000 9.5 75 BW 811 1.54 2,000 8,000 12.0 106 BW 81
1-1/4 1.99 1,625 6,500 16.5 166 BC-BW 791-1/2 2.21 1,250 5,000 20.0 189 BC-BW 79
2 2.71 1,125 4,500 25.0 247 BC-BW 79
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
BXX04BXX06BXX08
BXX10BXX12BXX16
BXX20BXX24BXX32
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
1/4 .59 5,000 20,000 2.0 27 GW-HY 132 BM 2333/8 .74 4,000 16,000 2.5 38 BW-GW-HY 132 BM 2331/2 .87 3,500 14,000 3.5 46 BW-GW HY 132 BM 233
5/8 1.00 2,750 11,000 4.0 55 HF-HY 1323/4 1.15 2,250 9,000 4.8 65 BW-HY 132 BM 2331 1.49 2,000 8,000 6.0 98 BW-HY 132 BM 233
1-1/4 1.88 1,625 6,500 16.5 142 BW-HY 1321-1/2 2.13 1,250 5,000 20.5 168 BC-BW 79
2 2.63 1,125 4,500 25.0 224 BC-BW 79
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
† Requires special tooling. Contact Dayco Eastman.
SPIRAL
HOSE
High Pressure HoseWorking Pressures to 5,000 PSI
GENERAL
INFORMATION
BRAIDED
HOSE
SPECIALTY
HOSE
COUPLINGS
MISC
EQUIPMENT 52
Applications: Used for high pressure hydraulic lines on off-the-road construction, farm, and mining equipment operatingin an abrasive and restricted environment
Temperature Range: -40˚ F to +212˚ F
Tube: Neoprene
Reinforcement: Two braids of high tensile steel wire
Cover: Abrasion, oil and weather resistant ultra high molecularweight polyethylene–MSHA approved
Applications: Used for high pressure hydraulic lines on off-the-road construction, farm, and mining equipment operatingin an abrasive and restricted environment
Bend radius is 1/2 of the SAE requirement (through size -16 only)
Temperature Range: -40˚ F to +212˚ F
Tube: Neoprene
Reinforcement: Two braids of high tensile wire
Cover: Abrasion, oil and water resistant Neoprene – MSHAapproved
RT2 E-Z Flex®
SAE 100R2ATVery High Abrasion Resistance
BXP IroncladTM
SAE 100R2ATExceptional High Abrasion Resistance
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
BXP04BXP06BXP08
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
1/4 .59 5,000 20,000 4.0 27 BW-GW 1143/8 .74 4,000 16,000 5.0 36 BW-GW 1141/2 .87 3,500 14,000 7.0 46 BW-GW 114
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
RT204RT206RT208
RT210RT212RT216
RT220RT224RT232
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
1/4 .59 5,000 20,000 2.0 27 BW-GW-HY 1323/8 .74 4,000 16,000 2.5 38 BW-GW-HY 1321/2 .87 3,500 14,000 3.5 46 BW-GW-HY 132
5/8 1.00 2,750 11,000 4.0 55 HY 1323/4 1.15 2,250 9,000 4.8 65 BW-HY 1321 1.49 2,000 8,000 6.0 98 BW-HY 132
1 1/4 1.88 1,625 6,500 16.5 142 BW-HY 1321 1/2 2.13 1,250 5,000 20.5 168 BC-BW 79
2 2.63 1,125 4,500 25.0 224 BC-BW 79
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
SPIRAL
HOSE
GENERAL
INFORMATION
BRAIDED
HOSE
SPECIALTY
HOSE
COUPLINGS
MISC
EQUIPMENT
High Pressure HoseWorking Pressures to 6,600 PSI
53
Applications: Used for high pressure hydraulic lines on off-the-road construction equipment, machine tools, farm andmarine equipment
Temperature Range: -40 ̊F to +212 ̊FSAE/USCG Marine Listed
Tube: Nitrile
Reinforcement: Two braid of high tensile steel wire
Cover: Oil and weather resistant synthetic rubber–MSHA approved
J4SAE 100R2AT
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
J420J424J432
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
1-1/4 1.88 1,625 6,600 16.5 129 BW-HY-JJ 811-1/2 2.16 1,250 5,000 20.0 150 BW-JJ 81
2 2.66 1,125 4,500 25.0 187 BC-BW-JJ 81
Applications: Used for high pressure hydraulic lines on off-the-road construction equipment, machine tools, farm andmarine equipment.
Temperature Range: -40 ̊F to +212 ̊F
Tube: Polyester
Reinforcement: Two braids of high tensile steel wire
Cover: Neoprene–MSHA approved
J4ASAE 100R2AT
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
J404AJ406AJ408A
J412AJ416A
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
1/4 .59 5,000 20,000 2.0 28 HY 1323/8 .75 4,000 16,000 2.5 39 BW-HY 1321/2 .88 3,500 14,000 3.5 45 BW-HY 132
3/4 1.15 2,250 9,000 4.8 62 BW-HY 1321 1.50 2,000 8,000 6.0 87 BW-HY 132
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
SPIRAL
HOSE
High Pressure HoseWorking Pressures to 5,000 PSI
GENERAL
INFORMATION
BRAIDED
HOSE
SPECIALTY
HOSE
COUPLINGS
MISC
EQUIPMENT 54
Applications: Used for high pressure hydraulic lines on off-the-road construction equipment, machine tools, farm andmarine equipment
Temperature Range: -40 ̊F to +250 ̊F (Petroleum base applications)-40 ̊F to +180 ̊F (Water/Glycol applications)
Tube: Neoprene
Reinforcement: Two braids of high tensile steel wire
Cover: Oil and weather resistant synthetic rubber–MSHA approved
J9SAE 100R2AT
High Temperature
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
J904J906J908
J912J916
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
1/4 .59 5,000 20,000 4.0 27 HY 1323/8 .74 4,000 16,000 5.0 38 BW-HY 1321/2 .87 3,500 14,000 7.0 46 BW-HY 132
3/4 1.15 2,250 9,000 9.5 65 BW-HY 1321 1.49 2,000 8,000 12.0 98 BW-HY 132
Applications: Used on high pressure hydraulic applications
Temperature Range: -40˚ F to +200˚ F
For twin or multiple line configurations, refer to page 77
Tube: Polyester
Reinforcement: One braid of aramid fiber
Cover: Black abrasion resistant polyurethane (pin-pricked)
S8SAE 100R8
Hytron® Hose
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
S803S804S806
S808S812S816
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
3/16 .44 5,000 20,000 1.5 7 SU†† 1951/4 .51 5,000 20,000 2.0 8 HY-SU†† 1953/8 .64 4,000 16,000 2.5 11 HY-SU†† 195
1/2 .80 3,500 14,000 4.0 16 HY-SU†† 1953/4 1.10 2,250 9,000 6.5 25 CY-HY 1321 1.41 2,000 8,000 9.0 38 CY-HY 132
†† SU series couplings may be swaged (with S-16 swager) orcrimped onto this hose series.
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
SPIRAL
HOSE
GENERAL
INFORMATION
BRAIDED
HOSE
SPECIALTY
HOSE
COUPLINGS
MISC
EQUIPMENT
High Pressure HoseWorking Pressures to 5,000 PSI
55
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
†† SU series couplings may be swaged (with S-16swager) or crimped onto this hose series.
Applications: Used on high pressure hydraulic applicationsrequiring a non-conductive hose
Temperature Range: -40˚ F to +200˚ F
For twin or multiple line configurations, refer to page 77
Tube: Natural polyester
Reinforcement: One braid of aramid fiber
Cover: Orange abrasion resistant polyurethane (non-pin-pricked)
S8ESAE 100R8
Non-Conductive Hytron® Hose
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
S8E03S8E04S8E06
S8E08S8E12S8E16
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
3/16 .44 5,000 20,000 1.5 7 SU†† 1951/4 .51 5,000 20,000 2.0 8 HY-SU†† 1953/8 .64 4,000 16,000 2.5 11 HY-SU†† 195
1/2 .80 3,500 14,000 4.0 16 HY-SU†† 1953/4 1.10 2,250 9,000 6.5 25 CY-HY 1321 1.41 2,000 8,000 9.0 38 CY-HY 132
Applications: Used as a replacement for SAE 100R2 highpressure hydraulic lines on off-the-road construction equip-ment, machine tools and mining equipment
Temperature Range: -40˚ F to +250˚ F
SAE/USCG Marine Listed
Tube: Neoprene
Reinforcement: Two high tensile steel wire braids
Cover: Oil and weather resistant synthetic rubber–MSHAapproved
FX E-Z Flex® 250SAE 100R16
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
FX04FX06FX08
FX10FX12FX16
FX20
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
1/4 .55 5,000 20,000 2.0 23 GW-HY 1323/8 .67 4,000 16,000 2.5 28 BW-GW-HY 1321/2 .81 3,500 14,000 3.5 36 BW-GW-HY 132
5/8 .93 2,750 11,000 4.0 42 HF-HY 1323/4 1.07 2,250 9,000 4.8 51 BW-HY 1321 1.37 2,000 8,000 6.0 72 BW-HY 132
1-1/4 1.69 1,625 6,500 8.3 102 BC-BW-HY 132
SPIRAL
HOSE
High Pressure HoseWorking Pressures to 5,000 PSI
GENERAL
INFORMATION
BRAIDED
HOSE
SPECIALTY
HOSE
COUPLINGS
MISC
EQUIPMENT 56
Applications: Used as a replacement for SAE 100R2 highpressure hydraulic lines on off-the-road construction equip-ment, machine tools and mining equipment
Temperature Range: -40˚ F to +212˚ F
SAE/USCG Marine Listed
Tube: Polyester
Reinforcement: One braid of high tensile steel wire**Two braids of high tensile steel wire
Cover: Neoprene–MSHA approved
HFS2 Firescreen II®
SAE 100R16
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
HFS204**HFS206HFS208
HFS210HFS212HFS216**
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
1/4 .56 5,000 20,000 2.0 21 HY 132 BA 2273/8 .66 4,000 16,000 2.5 23 GB†-HY 132 BA 2271/2 .80 3,500 14,000 3.5 29 GB†-HY 132 BA 227
5/8 .95 2,750 11,000 4.0 38 GB†-HF-HY 1323/4 1.08 2,250 9,000 4.8 45 GB†-HY 132 BA 2271 1.43 2,000 8,000 6.0 80 HY 132 BA 227
Applications: Used as a replacement for SAE 100R2 highpressure hydraulic lines on agriculture equipment
Temperature Range: -40˚ F to +212˚ F
Tube: Polyester
Reinforcement: One braid of high tensile steel wire**Two braids of high tensile steel wire
Cover: Neoprene–MSHA approved
HR2C – Farmex II®
SAE 100R16
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
HR2C04**HR2C06HR2C08
HR2C10HR2C12HR2C16**
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
1/4 .56 5,000 20,000 2.0 21 HY 132 BA 2273/8 .66 4,000 16,000 2.5 23 GB†-HY 132 BA 2271/2 .80 3,500 14,000 3.5 29 GB†-HY 132 BA 227
5/8 .95 2,750 11,000 4.0 38 GB†-HF-HY 1323/4 1.08 2,250 9,000 4.8 45 GB†-HY 132 BA 2271 1.43 2,000 8,000 6.0 80 HY 132 BA 227
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
† Requires special tooling. Contact Dayco Eastman.
SPIRAL
HOSE
GENERAL
INFORMATION
BRAIDED
HOSE
SPECIALTY
HOSE
COUPLINGS
MISC
EQUIPMENT
High Pressure HoseWorking Pressures to 10,000 PSI
57
Applications: Used for petroleum based and fire resistant fluids. Fire resis-tant fluids may have limitations and should be discussed with DaycoEastman Applications Engineering DepartmentTemperature Range: -40˚ F to +300˚ F (Petroleum based fluids)
-40˚ F to +250˚ F (Water/Oil emulsions)-40˚ F to +250˚ F (Water/Glycol solutions)-40˚ F to +180˚ F (Phosphate Ester fluids)
SAE/USCG Marine Listed
Tube: Chlorinated polyethylene
Reinforcement: Two high tensile steel wire braids
Cover: Oil, ozone and abrasion resistant blue syntheticrubber–MSHA approved
DT Blue Lightning®
Exceeds SAE 100R2High Temperature
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
DT06DT08DT12DT16
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
3/8 .74 4,000 16,000 5.0 35 BW-GW 811/2 .87 3,500 14,000 7.0 45 BW 813/4 1.15 2,250 9,000 9.5 65 BW 811 1.48 2,000 8,000 12.0 96 BW 81
Applications: Used for high pressure hydraulic lines on off-the-road construction, farm and mining equipment operating inan abrasive and restricted environment.
Temperature Range: -40 ̊to 212 ̊F
Tube: Neoprene
Reinforcement: Two braids of high tensile wire
Cover: Abrasion, oil and water resistant Neoprene – MSHA approved
SN2KAbrasion King®
DIN 20022-2SN
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
SN2K04SN2K06SN2K08
SN2K10SN2K12SN2K16
SN2K20SN2K24SN2K32
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
1/4 .59 5,800 23,200 4.0 27 BW 813/8 .74 4,800 19,200 5.0 38 BW 811/2 .87 4,000 16,000 7.0 46 BW 81
5/8 1.00 3,625 14,500 8.0 55 HY 1323/4 1.15 3,200 12,800 9.6 65 BW 811 1.49 2,400 9,600 12.0 98 BW 81
1 1/4 1.88 1,800 7,200 16.5 142 BW 811 1/2 2.13 1,300 5,200 20.5 168 BC-BW 79
2 2.63 1,160 4,640 25.0 224 BC-BW 79
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
DINNumber
DN06DN10DN12
DN16DN20DN25
DN32DN40DN50
SPIRAL
HOSE
F2 BlueExceeds SAE 100R2AT and
DIN 20022-2SN High Temperature
High Pressure HoseWorking Pressures to 10,000 PSI
GENERAL
INFORMATION
BRAIDED
HOSE
SPECIALTY
HOSE
COUPLINGS
MISC
EQUIPMENT 58
Applications: Used for petroleum based and fire resistant flu-ids. Fire resistant fluids may have limitations and should bediscussed with Dayco Eastman Applications EngineeringDepartment
Temperature Range: -65˚ F to +300˚ F (Petroleum based fluids)-65˚ F to +250˚ F (Water/Oil emulsions)-65˚ F to +250˚ F (Water/Glycol solutions)-65˚ F to +180˚ F (Phosphate Ester fluids)
Tube: Hypalon®
Reinforcement: Two braids of high tensile steel wire
Cover: Hypalon®–MSHA approved
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
F206F208F210
F212F216F220
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
3/8 .75 5,000 20,000 5.0 36 BW-HY 1321/2 .87 4,250 17,000 7.0 42 BW-HY 1325/8 .99 3,600 14,400 8.0 50 HY 132
3/4 1.18 3,000 12,000 9.5 63 BW-HY 1321 1.46 2,500 10,000 12.0 84 BW-HY 132
1-1/4 1.85 2,250 9,000 16.5 140 BW-HY 132
Applications: Used for high pressure hydraulic service
Temperature Range: -40˚ F to +212˚ F
SAE/USCG Marine Listed
Tube: Polyester
Reinforcement: Two braids of high tensile steel wire
Cover: Neoprene–MSHA approved
HTB Eliminator®
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
HTB04HTB06HTB08
HTB10HTB12HTB16
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
1/4 .60 7,000 28,000 4.0 27 HY 1323/8 .74 5,500 22,000 6.0 37 BW-HY-JJ 1321/2 .88 5,000 20,000 7.0 46 BW-HY-JJ 132
5/8 1.01 4,000 16,000 8.0 52 HF-HY-JJ 1323/4 1.18 4,000 16,000 9.5 73 BW-HY-JJ 1321 1.48 3,500 14,000 12.0 101 BW-HY-JJ 132
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
† Requires special tooling. Contact Dayco Eastman.
SPIRAL
HOSE
GENERAL
INFORMATION
BRAIDED
HOSE
SPECIALTY
HOSE
COUPLINGS
MISC
EQUIPMENT
High Pressure HoseWorking Pressures to 10,000 PSI
59
Applications: For ultra high pressure hydraulic applications.
Temperature Range: -40˚ F to +200˚ F
WARNING: All HRK assemblies must have a BOG (guard)attached to both ends (Refer to page 258).FACTORY MADE ASSEMBLIES ONLY
Tube: Nylon
Reinforcement: Multiple layers of aramid fiber
Cover: Black abrasion resistant polyurethane (pin-pricked)
HRKHytron® Ultra High Pressure Hose
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
HRK03HRK04HRK06
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
3/16 .51 10,000 40,000 3.5 9 CW† 911/4 .62 10,000 40,000 4.0 11 CW† 913/8 .78 7,500 30,000 6.0 16 CW† 91
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
† Requires special tooling. Contact Dayco Eastman.
GENERAL
INFORMATION
BRAIDED
HOSE
SPIRAL
HOSE
SPECIALTY
HOSE
COUPLINGS
MISC
EQUIPMENT 60
Spiral Wire Reinforced HoseWorking Pressures to 7,000 PSI
Applications: Used for high pressure hydraulic service.Provides longer life in flex impulse applications than braidedhose.
Temperature Range: -40˚ F to +212˚ F
SAE/USCG Marine Listed
Tube: Neoprene
Reinforcement: Four spiraled layers of high tensile steel wire
Cover: Oil and weather resistant synthetic rubber–MSHA approved
QXSAE 100R9AT
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
QX06QX08QX12
QX16QX20QX24
QX32
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
3/8 .78 4,500 18,000 5.0 45 BW 811/2 .89 4,000 16,000 7.0 50 BW 813/4 1.19 3,000 12,000 9.5 80 BW 81
1 1.50 3,000 12,000 12.0 117 BW 811-1/4 1.86 2,500 10,000 16.5 189 BW 811-1/2 2.11 2,000 8,000 20.0 212 BW 81
2 2.66 2,000 8,000 26.0 308 BW 81
Applications: Used for high pressure hydraulic service.Provides longer life in flex-impulse applications than braidedhose.
Temperature Range: -40˚ F to +212˚ F
SAE/USCG Marine Listed
Tube: Neoprene
Reinforcement: Four spiraled layers of high tensile steel wire
Cover: Oil and weather resistant synthetic rubber–MSHA approved
L1SAE 100R9AT
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
L106L108L112
L116L120
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
3/8 .80 4,500 18,000 5.0 47 BW-HY 1321/2 .89 4.000 16,000 7.0 56 BW-HY 1323/4 1.18 3,000 12,000 9.5 87 BW-HY-JJ 132
1 1.50 3,000 12,000 12.0 124 BW-HY-JJ 1321-1/4 1.82 2,500 10,000 16.5 200 BW 81
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
GENERAL
INFORMATION
SPECIALTY
HOSE
COUPLINGS
MISC
EQUIPMENT61
Spiral Wire Reinforced HoseWorking Pressures to 7,000 PSI
Applications: Used for high pressure hydraulic service.Provides longer life under the higher temperatures and pres-sures of modern hydraulically operated equipmentBend radius is 1/2 of SAE requirements for sizes -12, -16, and -20Temperature Range: -40˚ F to +250˚ F
SAE/USCG Marine Listed
Tube: Neoprene
Reinforcement: Four spiraled layers of high tensile steel wire
Cover: Oil and weather resistant synthetic rubber – gray color –MSHA approved
CEE-Z Flex® Spiral
SAE 100R12
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
CET06CET08CE12
CE16CE20CE24
CE32
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
3/8 .78 4,000 16,000 5.0 45 BW-JJ 811/2 .89 4,000 16,000 7.0 50 BW-JJ 813/4 1.21 4,000 16,000 4.8 89 BW-JJ 81
1 1.50 4,000 16,000 6.0 136 BW-JJ 811-1/4 1.85 3,000 12,000 8.3 182 BW-JJ 811-1/2 2.11 2,500 10,000 20.0 207 BW-JJ 81
2 2.63 2,500 10,000 25.0 296 BW-JJ 81
Applications: Used for high pressure hydraulic service.Provides longer life under the higher temperatures and pres-sures of modern hydraulically operated equipment
Temperature Range: -40˚ F to +250˚ F
SAE/USCG Marine Listed
Tube: Neoprene
Reinforcement: Four spiraled layers of high tensile steel wire
Cover: Oil and weather resistant synthetic rubber–graycolor–MSHA approved
M7SAE 100R12
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
M706M708M710
M712M716M720
M724M732
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
3/8 .79 4,000 16,000 5.0 42 BW-JJ 811/2 .94 4,000 16,000 7.0 54 BW-JJ 815/8 1.07 4,000 16,000 8.0 71 BW-JJ 81
3/4 1.21 4,000 16,000 9.5 82 BW-JJ 811 1.50 4,000 16,000 12.0 138 BW-JJ 81
1-1/4 1.85 3,000 12,000 16.5 189 BW-JJ 81
1-1/2 2.11 2,500 10,000 20.0 223 BW-JJ 812 2.63 2,500 10,000 25.0 311 BW-HW-JJ 81
BRAIDED
HOSE
SPIRAL
HOSE
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
Spiral Wire Reinforced HoseWorking Pressures to 7,000 PSI
GENERAL
INFORMATION
SPECIALTY
HOSE
COUPLINGS
MISC
EQUIPMENT 62
Applications: Used for high pressure hydraulic service.
Provides 100R12 performance at half of the minimum bendradius.
Temperature Range: -40˚ F to +250˚ F
Tube: Polyester
Reinforcement: Two braids of high tensile steel wire
Cover: Neoprene – MSHA approved
M8 E-Z Flex®
SAE 100R12 PerformanceAlternate Two Wire Braid
Reinforcement
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
M806M808M810M812
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
3/8 .74 4,000 16,000 2.5 37 BW-HY-JJ 811/2 .88 4,000 16,000 3.5 46 BW-HY-JJ 815/8 1.05 4,000 16,000 4.0 63 JJ 1683/4 1.18 4,000 16,000 4.8 77 BW-JJ 81
Applications: Used for high pressure hydraulic service.Provides longer life under the higher temperatures and pres-sures of modern hydraulically operated equipment
Temperature Range: -40˚ F to +250˚ F
Tube: Neoprene
Reinforcement: Four spiraled layers of high tensile steel wire
Cover: Oil and weather resistant – gray color – MSHA approved
CZSAE 100R12
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
CZ06CZ08CZ10
CZ12CZ16CZ20
CZ24CZ32
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
3/8 .80 4,000 16,000 5.0 45 BW 811/2 .94 4,000 16,000 7.0 58 BW 815/8 1.07 4,000 16,000 8.0 71 JJ 168
3/4 1.21 4,000 16,000 9.5 87 BW 811 1.50 4,000 16,000 12.0 140 BW 81
1-1/4 1.85 3,000 12,000 16.5 184 BW 81
1-1/2 2.11 2,500 10,000 20.0 210 JJ 1682 2.63 2,500 10,000 25.0 281 HW 127
BRAIDED
HOSE
SPIRAL
HOSE
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
GENERAL
INFORMATION
SPECIALTY
HOSE
COUPLINGS
MISC
EQUIPMENT
Spiral Wire Reinforced HoseWorking Pressures to 7,000 PSI
63
Applications: Used in severe high pressure hydraulic applications
Temperature Range: -40˚ F to +250˚ F
SAE/USCG Marine Listed
Tube: Neoprene
Reinforcement: Four spiraled layers of high tensile steel wire
Cover: Oil and weather resistant synthetic rubber–MSHA approved
CNExceeds 100R11
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
CN20CN24CN32
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
1-1/4 1.78 4,000 16,000 18.0 164 BW-JJ 811-1/2 2.10 3,000 12,000 22.0 224 BW-JJ 81
2 2.69 3,000 12,000 28.0 323 BW-JJ 81
Applications: A superior spiral hose for use in severe highpressure hydraulic applications
Temperature Range: -40˚F to +212˚F
SAE/USCG Marine Listed
Tube: Neoprene
Reinforcement: Four spiraled layers of high tensile steel wire
Cover: Oil and weather resistant synthetic rubber – MSHAapproved
N3DIN 20023†
† Sizes -6, -8, and -10 meet DIN 20023 4SP.Sizes -12, -16, -20, -24 and -32 meet DIN 20023 4SH
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
N306N308N310
N312N316N320
N324N332
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
3/8 .78 6,400 25,600 7.0 48 JJ 1681/2 .91 6,000 24,000 9.0 56 JJ 1685/8 1.12 6,000 24,000 9.5 77 JJ 168
3/4 1.26 6,000 24,000 9.5 105 JJ 1681 1.50 5,500 22,000 12.0 140 JJ 168
1-1/4 1.78 5,000 20,000 16.0 169 JJ 168
1-1/2 2.11 4,200 16,800 18.0 230 JJ 1682 2.68 3,600 14,400 27.5 318 JJ 168
BRAIDED
HOSE
SPIRAL
HOSE
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
Spiral Wire Reinforced HoseWorking Pressures to 7,000 PSI
GENERAL
INFORMATION
SPECIALTY
HOSE
COUPLINGS
MISC
EQUIPMENT 64
*Burst pressure is for reference and design purposes only and is noindication that the product should be used above the indicated relatedworking pressure.
Applications: A superior spiral hose for use in severe highpressure hydraulic applications
Temperature Range: -40˚ F to +250˚ F
SAE/USCG Marine ListedDNV Approved
Tube: Seamless Neoprene, oil resistant synthetic rubber
Reinforcement: Four spiraled layers of high tensile steel wire**Six spiraled layers of high tensile steel wire
Cover: Oil and weather resistant synthetic rubber – red color –MSHA approved
NHSAE 100R13
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
NH12NH16NH20**
NH24**NH32**
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
3/4 1.26 5,000 20,000 9.5 112 BW-JJ 811 1.52 5,000 20,000 12.0 156 BW-JJ 81
1-1/4 1.96 5,000 20,000 16.0 256 NB-JJ 190
1-1/2 2.26 5,000 20,000 20.0 339 NB 1902 2.80 5,000 20,000 25.0 485 NB 190
Applications: Used in severe high pressure hydraulic applications
Temperature Range: -40˚F to +250˚F
SAE/USCG Marine Listed
Tube: Neoprene
Reinforcement: Four spiraled layers of high tensile steel wire**Six spiraled layers of high tensile steel wire
Cover: Red, oil and weather resistant synthetic rubber–MSHAapproved
N6SAE 100R13
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
N612N616N620**
N624**N632**
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
3/4 1.26 5,000 20,000 9.5 114 BW-JJ 1681 1.54 5,000 20,000 12.0 153 BW-JJ 168
1-1/4 1.96 5,000 20,000 16.5 250 JJ-NB 168
1-1/2 2.26 5,000 20,000 20.0 333 JJ-NB 1682 2.80 5,000 20,000 25.0 495 JJ 168
BRAIDED
HOSE
SPIRAL
HOSE
SPECIALTY
HOSE
BRAIDED
HOSE
GENERAL
INFORMATION
COUPLINGS
MISC
EQUIPMENT
Spiral Wire Reinforced HoseWorking Pressures to 6,000 PSI
65
Applications: A compact, lighter hose for use in severe highpressure hydraulic applications including hydrostatic drives.
Temperature Range: -40˚ F to +250˚ F
Tube: Neoprene
Reinforcement: Four Spiraled layers of high tensile steel wire
Cover: Oil and weather resistant synthetic rubber–MSHA approved
HT6
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
HT612HT616
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
3/4 1.33 6,000 24,000 9.5 120 BW-JJ 1681 1.59 6,000 24,000 12.0 162 JJ-KW 168
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
Applications: A compact, lighter hose for use in severe highpressure hydraulic applications including hydrostatic drives.
Temperature Range: -40˚ F to +250˚ F
Tube: Neoprene
Reinforcement: Four spiraled layers of high tensile steel wire** Six spiraled layers of high tensile steel wire
Cover: Oil and weather resistant synthetic rubber–MSHA approved
N2SAE 100R15
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
N212N216N220N224**
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
3/4 1.23 6,000 24,000 10.5 100 JJ 1681 1.50 6,000 24,000 10.5 142 JJ 168
1 1/4 1.90 6,000 24,000 10.5 242 JJ 1681-1/2 2.25 6,000 24,000 12.5 343 JJ 168
SPIRAL
HOSE
SPECIALTY
HOSE
Spiral Wire Reinforced HoseWorking Pressures to 7,000 PSI
GENERAL
INFORMATION
BRAIDED
HOSE
COUPLINGS
MISC
EQUIPMENT 66
H7Extra High Pressure
Applications: A compact, lighter hose for use in servere highpressure hydraulic applications.
Temperature Range: -40˚ F to +250˚ F
Tube: Neoprene
Reinforcement: Four spiraled layers of high tensile steel wire
Cover: Oil and weather resistant synthetic rubber–MSHA approved
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
H704H706H708
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
1/4 .79 7,000 28,000 4.0 55 KC 1843/8 .81 7,000 28,000 6.0 59 JJ 1681/2 1.00 7,000 28,000 8.0 82 JJ 168
SPIRAL
HOSE
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
SPIRAL
HOSE
BRAIDED
HOSE
GENERAL
INFORMATION
SPECIALTY
HOSE
COUPLINGS
MISC
EQUIPMENT
Specialty Hose
67
BHBarrier Refrigerant Hose
Exceeds SAE J51Meets SAE J2064
Applications: Specifically designed for use in R12 andR134A refrigerant systems only.
Temperature Range: -22˚ F to +257˚ F
Tube: Neoprene/nylon barrier/nitrile barrier construction
Reinforcement: Textile reinforcement
Cover: Black, abrasion, ozone and heat resistant EPDM
† Requires special tooling. Contact Dayco Eastman.
PERMANENT REUSABLE
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
CatalogNumber
BH06BH08BH10
BH12
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
5/16 .75 350 2,000 4.0 19 BL† 20313/32 .91 350 2,000 4.7 27 BL† 2031/2 1.00 350 2,000 5.5 32 BL† 203
5/8 1.13 350 1,750 6.5 37 BL† 203
†† Bulk hose sales only, no coupling.
Applications: Specifically designed for use in R12 andR134A refrigerant systems only.
Temperature Range: -22˚ F to +203˚ F
Tube: Neoprene/nylon barrier/nitrile barrier construction
Reinforcement: One textile braid
Cover: Abrasion, ozone and heat resistant EPDMColors: Black - BK Red - RD
Blue - BL Yellow - YL
BCHBarrier Charging Hose
Meets SAE J2196PERMANENT REUSABLE
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
CatalogNumber
BCH03
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
7/32 .48 800 4,000 4.0 9 ††
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
SPECIALTY
HOSE
SPIRAL
HOSE
GENERAL
INFORMATION
COUPLINGS
MISC
EQUIPMENT 68
Specialty Hose
Applications: For use with truck air and air brake systems,except for the compressor discharge line and other tempera-ture limiting locations
Temperature Range: -40˚ F to +200˚ F
Meets DOT FMVSS 106 requirements except for C602
Tube: NylonReinforcement: Type A, non-reinforced (-02 thru -05 sizes)
Type B, polyester fiber reinforced (-06 thru -12 sizes)Cover: Black nylon
Also available in blue, red, green, brown, yellow and orangeAvailability of colors depends on size.
C6Hytron® Air Brake Tubing
SAE J844
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
C602C604C605
C606C608C610
C612
Max. Min. Min.Wall Working Burst Bend Per
Thickness O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
.023 .13 150 1,000 .37 .3 †
.040 .25 150 1,200 1.00 1.2 †
.040 .31 150 1,000 1.25 1.5 †
.062 .38 150 1,400 1.50 2.8 †
.062 .50 150 950 2.00 4.3 †
.092 .63 150 900 2.50 6.8 †
.092 .75 150 800 3.00 8.5 †
Applications: Used for air brake hose lines. Not to be usedfrom air compressor to air resevoir if temperature exceeds+250˚F
Temperature Range: -40˚F to +250˚F
Tube: EPDM
Reinforcement: Four spiraled textile layersCover: EPDM
Y1SAE J1402, Table A
DOT FMVSS 106
**Y1 assemblies built with GR couplings assembled outside of DaycoEastman factories must be identified by the assembler per DOTFMVSS 571.106 if used in motor vehicle air brake applications.
PERMANENT REUSABLE
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
CatalogNumber
Y104Y106Y108
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
1/4 .62 225 900 2.5 15 GR**-GT†† 1113/8 .75 225 900 3.5 18 GR**-GT†† 1111/2 .87 225 900 4.0 23 GR**-GT†† 111
BRAIDED
HOSE
† Bulk tubing sales only, no coupling.
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
†† Requires special tooling. Contact Dayco Eastman
SPIRAL
HOSE
BRAIDED
HOSE
GENERAL
INFORMATION
COUPLINGS
MISC
EQUIPMENT
Specialty Hose
69
Applications: Low expansion hose for hydraulic brake hoseassemblies to be used in hydraulic braking systems of “off-road”vehicles. Compatible with DOT-3 and DOT-4 and most non-petrole-um brake fluids. Not compatible with mineral oil based brake fluids.
Temperature Range: -55˚ F to +250˚ F
Tube: EPDM
Reinforcement: Two textile braids
Cover: EPDM
FACTORY ASSEMBLIES ONLYNOT TO BE USED ON "ON-ROAD" VEHICLES.
Y7SAE J1401 and DOT FMVSS 106Hydraulic (Off-Road) Brake Hose
PERMANENT REUSABLE
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
CatalogNumber
Y703
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
3/16 .47 1,500 8,000 2.5 8 GF 104
Applications: This LPG hose meets the Underwritersrequirements for:UL-558 Industrial Truck L.P. Gas Assemblies, recognizedcomponent (file AU1733) UL-569 Pigtails and Flexible Hose Connectors UL Labeled(file MH6925), 60 inch maximum length.
Temperature Range: -40˚F. to + 200˚F.
Tube: NitrileReinforcement: One textile braid
Cover: Neoprene
FACTORY MADE ASSEMBLIES ONLY,TO COMPLY WITH UL REGULATIONS
W5LPG HoseUL Listed
PERMANENT REUSABLE
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
CatalogNumber
W506
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
3/8 .69 350 1,750 4 17 GF 104
SPECIALTY
HOSE
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
Specialty HoseGENERAL
INFORMATION
BRAIDED
HOSE
COUPLINGS
MISC
EQUIPMENT 70
Applications: Used for lubrication lines and grease whiphose. Use with hand grease guns only.
Temperature Range: -40˚ F to +120˚ F
WARNING: Do not use as whip hose on power grease guns!
Tube: Polyester
Reinforcement: One braid of polyester fiber
Cover: Black abrasion resistant polyurethane
HLBHytron® Grease Hose
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
HLB02
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
1/8 .32 3,000 12,000 1.5 3 CY-GH† 92 BU 242
Applications: Used for medium pressure hot water sprayapplications including car and power washers
Temperature Range: -30˚ F to +225˚ F
Tube: Thermoplastic rubber
Reinforcement: One braid of high tensile steel wireCover: Non-marking synthetic rubber
Colors: Red - RD; Blue - BL; Black - BKNote: HSH204 available red cover only.
HSH2 Tempest II®
Hot Water Spray PERMANENT REUSABLE
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
CatalogNumber
HSH204HSH206
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
1/4 .52 3,000 12,000 4.0 13 CY-GH† 923/8 .67 3,000 12,000 5.0 20 CY-GH† 92 BA-BB 227
SPECIALTY
HOSE
SPIRAL
HOSE
† Requires special tooling. Contact Dayco Eastman.*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
SPIRAL
HOSE
BRAIDED
HOSE
GENERAL
INFORMATION
COUPLINGS
MISC
EQUIPMENT
Specialty Hose
71
Applications: Static conductive, airless paint spray hose.High volumetric expansion rate and long impulse life. Tuberesists paints, lacquers and thinners
Temperature Range: -40˚ F to +180˚ F
FACTORY MADE ASSEMBLIES ONLY
Tube: Natural nylon
Reinforcement: Two braids of synthetic fiber with a metal platedconductive yarn as part of the braid
Cover: Black abrasion resistant polyurethane (non-pin-pricked)
Applications: Static conductive, airless paint spray hose.High volumetric expansion rate and long impulse life. Tuberesists paints, lacquers and thinners
Temperature Range: -40˚ F to +180˚ F
FACTORY MADE ASSEMBLIES ONLY
Tube: Natural nylon
Reinforcement: One braid (HPS03 and HPS04) or two braids(HPS06) of synthetic fiber with a metal plated conductive yarn.
Cover: Black abrasion resistant polyurethane (non-pin-pricked)
HPSHytron® Paint Spray Hose
HPCHytron® Paint Spray Hose
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
HPC04
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
1/4 .52 3,300 13,200 2.0 7 HY 132
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
HPS03HPS04HPS06
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
3/16 .40 3,300 13,200 2.0 5 CD1/4 .50 3,000 12,000 2.0 7 HY 1323/8 .73 3,300 13,200 4.0 13 HY 132
SPECIALTY
HOSE
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
SPIRAL
HOSE
Specialty HoseGENERAL
INFORMATION
BRAIDED
HOSE
COUPLINGS
MISC
EQUIPMENT 72
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
Applications: Static conductive, airless paint spray hosewhich offers excellent resistance to kinking, abrasion and cut-ting. Tube resists paints, lacquers and thinners. Has a ratingof only one ohm/ft. of electrical resistance.
Temperature Range: -40˚ F to +180˚ F
Tube: Natural nylon
Reinforcement: One braid of high tensile steel wire
Cover: Blue abrasion resistant polyurethane (non-pin-pricked)
P3 Ever-Spray®
Hytron® Paint Spray Hose
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
P304
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
1/4 .46 3,000 12,000 2.0 10.0 CY 92
Applications: Used on high pressure sewer cleaning equipment
Temperature Range: -40˚ F to +125˚F
Available Lengths: 3/4" 400', 500' 600' and 800'1" 300',400', 500', 600', 700' and 800'1-1/4" 400', 500', 600', 700', and 800'1-1/2” 400’ and 500’
Male pipe thread each endMeets NSWMA Requirements (except -24)
Tube: Red polyester (-12, -16, -20)Natural Nylon (-24)
Reinforcement: One braid of polyester fiber (-12, -16)Two braids of polyester fiber (-20, -24)
Cover: Orange abrasion resistant polyurethane (pin-pricked)Sold as assemblies only
S6 Predator®
Hytron® Sewer Cleaning Hose
† SQ coupling are swageable using the SQ-101-SW swagersee page 73
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
S612S616S620S624
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius Kink 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) Radius (pounds) Series Page # Series Page #
3/4 1.14 2,500 6,250 4.0 2.0 29 HY-SQ† 1951 1.41 2,500 6,250 6.0 3.0 38 HY-SQ† 195
1-1/4 1.78 2,500 6,250 12.0 9.0 61 SQ† 1951 1/2 2.10 2,500 6,250 15.0 12.0 83 JJ 168
SPECIALTY
HOSE
SPECIALTY
HOSE
BRAIDED
HOSE
GENERAL
INFORMATION
COUPLINGS
MISC
EQUIPMENT
Specialty Hose
73
Applications: For use on high pressure sewer cleaningequipment
Temperature Range: -40 ̊F to +125 ̊F
Available Lengths: 300', 400', 500' and 600'Male pipe thread each endMeets NSWMA Requirements
Tube: Red polyester (red color tube identifies Dayco Eastmanas manufacturer)
Reinforcement: One braid of polyester fiber
Cover: Blue abrasion resistant polyurethane (pin-pricked)
Sold as assemblies only.
S9 Predator®
Hytron® Sewer Cleaning Hose
SQ-101-SW SwagerFor field assembly of Dayco Eastman S6 (-12 & -16) Predator® sewer cleaning hose. It's a tool designed for municipalitiesand sewer cleaning contractors which will give the user the ability to repair and extend the life of a reel of hose, should dam-age occur. Only SQ couplings may be swaged by using the SQ-101-SW.The SQ-101-SW swager, couplings and hose tube are color coded red, making it easy to identify that the components aremade by Dayco Eastman. By following Predator® hose inspection instruction card, P-1211(included with each reel of hose),and swage assembly instructions, the user can be assured of making an acceptable hose assembly.
DIES AND PUSHERS:SQ-101-12S6/S9 -12 size die for S6 and S9 hoseSQ-101-12P -12 size pusherSQ-101-16S6 -16 size die for S6 hose (only)SQ-101-16S9 -16 size die for S6 hose (only)SQ-101-16P -16 size pusherSQ-101-20S6 -20 size die for S6 hose (only)SQ-101-20P -20 size die pusher SQ-101-SW
A B C DCat. Hose Cut HexNo. I.D. Thread O.A.L. Off Orifice Size
SQ12-12MP 3/4 3/4-14 3.08 1.48 .61 1 1/4SQ16-16MP 1 1-11 1/2 3.42 1.69 .81 1 3/8SQ20-20MP 1 1/4 1 1/4-11 1/2 3.84 1.84 1.03 1 3/4
Style MPMale NPTF
A B CCat. Hose CutNo. I.D. O.A.L. Off Orifice
SQ12-12RM 3/4 3.70 .52 .61SQ16-16RM 1 4.00 .53 .81SQ20-20RM 1 1/4 4.53 .53 1.03
Style RMHose Splicer
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
S912S916
Max. Min. Min.Working Burst Bend Kink Per
I.D. O.D. Pressure Pressure* Radius Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (Inches) (pounds) Series Page # Series Page #
3/4 1.15 3,000 7,500 4.0 2 30 HY-SQ† 1951 1.47 3,000 7,500 8.0 3 46 HY-SQ† 195
SPECIALTY
HOSE
† SQ coupling are swageable using the SQ-101-SW swager. *Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
SPIRAL
HOSE
GENERAL
INFORMATION
BRAIDED
HOSE
COUPLINGS
MISC
EQUIPMENT 74
Specialty Hose
Applications: Used on high pressure water jetting equipment
Temperature Range: -40˚ F to +125˚ F
Available Lengths: 400 ft., 500 ft., and 600 ft.Male pipe thread each end
Tube: Polyester
Reinforcement: One braid of aramid fiber (S508)Two braids of polyester fiber (S510)
Cover: Black abrasion resistant polyurethane (pin-pricked)Sold as assemblies only.
S5 Predator®
Hytron® Water Jetting Hose
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
PERMANENT REUSABLE
CatalogNumber
S508S510
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
1/2 .80 4,000 16,000 4.0 16 HY 1325/8 1.06 4,000 12,000 5.0 32 JJ 168
Applications: Used for high pressure jack line applicationsMeets IJ-100 requirements
Temperature Range: -40˚ F to +150˚ F
FACTORY AUTHORIZED ASSEMBLY ONLYWARNING TAG AND SPRING GUARDS REQUIRED
Tube: Polyester
Reinforcement: Two braids of high tensile steel wire
Cover: Neoprene–MSHA approved
HJK Highjack®PERMANENT REUSABLE
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
CatalogNumber
HJK04
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
1/4 .60 10,000 30,000 4.0 27 HY 132
SPECIALTY
HOSE
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
SPIRAL
HOSE
BRAIDED
HOSE
GENERAL
INFORMATION
COUPLINGS
MISC
EQUIPMENT75
Specialty Hose
Applications: Used for high pressure water blast applications
Temperature Range: 0˚ F to +200˚ F
Tube: Neoprene
Reinforcement: Four spiraled layers of high tensile steel wire
Cover: Oil and weather resistant synthetic rubber–MSHA approved
WBWater-Blast Hose PERMANENT REUSABLE
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
CatalogNumber
WB12WB16
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
3/4 1.33 7,500 22,500 9.5 120 BW 811 1.59 7,500 22,500 12.0 162 BW 81
Applications: Used for high pressure water blast applications
Temperature Range: 0˚ F to +200˚ F
Tube: Neoprene
Reinforcement: Four spiraled layers of high tensile steel wire
Cover: Oil and weather resistant synthetic rubber–MSHA approved
W7Water-Blast Hose PERMANENT REUSABLE
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
CatalogNumber
W704W706W708
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
1/4 .79 10,000 30,000 4.0 55 KC 1843/8 .81 10,000 30,000 6.0 59 JJ 1681/2 1.00 10,000 30,000 8.0 82 JJ 168
SPECIALTY
HOSE
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
SPIRAL
HOSE
GENERAL
INFORMATION
BRAIDED
HOSE
COUPLINGS
MISC
EQUIPMENT 76
Specialty Hose
Applications: Used for ultra-high pressure water blast applications
Temperature Range: +40˚ F to +150˚ F
FACTORY ASSEMBLY ONLY
Tube: Neoprene
Reinforcement: Four spiraled layers of high tensile steel wire
Cover: Oil and weather resistant synthetic rubber–MSHA approved
W8Water-Blast
Ultra-High PressurePERMANENT REUSABLE
HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS
CatalogNumber
W806W808
Max. Min. Min.Working Burst Bend Per
I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #
3/8 .94 18,000 45,000 9.5 78 ER 971/2 1.06 15,000 37,500 10.0 91 ER 97
SPECIALTY
HOSE
*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.
SPIRAL
HOSE
BRAIDED
HOSE
GENERAL
INFORMATION
COUPLINGS
MISC
EQUIPMENT77
Hytron® HoseTwin and Multi-Line Hytron® Hose
“Twin” Hytron® hoses are available in the sizes and styles shown below. Basictwin line construction consists of two pieces of hose joined together to offer acompact and flexible system. Minimum order quantity is 250 feet for these partnumbers and hose is shipped bulk packed.
“Multi-Line” Hytron® hoses are also available upon quotation. These lines mayconsist of two or more Hytron® hoses joined together, including multi-lines of dif-ferent Hytron® hose styles. Minimum purchase quantities are required.
Dayco Eastman is also pleased to quote your specific assembly and lengthrequirements. Please note that minimum order quantities apply to these specialorder items.
Part Number Description
TC204 Twin-Line C2, SAE 100R7 Low temperature; 1/4” I.D. (inches)TC205 Twin-Line C2, SAE 100R7 Low temperature; 5/16” I.D. (inches)TC206 Twin-Line C2, SAE 100R7 Low temperature; 3/8” I.D. (inches)
TNR7E04 Twin-Line NR7E, SAE 100R7 Nylon tube, Non-conductive; 1/4” I.D. (inches)TNR7E06 Twin-Line NR7E, SAE 100R7 Nylon tube, Non-conductive; 3/8” I.D. (inches)TNR7E08 Twin-Line NR7E, SAE 100R7 Nylon tube, Non-conductive; 1/2” I.D. (inches)
TNR704 Twin-Line NR7, SAE 10R7 Nylon tube; 1/4” I.D. (inches)TNR706 Twin-Line NR7, SAE 10R7 Nylon tube; 3/8” I.D. (inches)TNR708 Twin-Line NR7, SAE 10R7 Nylon tube; 1/2” I.D. (inches)
TS7E04 Twin-Line S7E, SAE 100R7, Non-conductive; 1/4” I.D. (inches)TS7E05 Twin-Line S7E, SAE 100R7, Non-conductive; 5/16” I.D. (inches)TS7E06 Twin-Line S7E, SAE 100R7, Non-conductive; 3/8” I.D. (inches)TS7E08 Twin-Line S7E, SAE 100R7, Non-conductive; 1/2” I.D. (inches)
TS704 Twin-Line S7, SAE 100R7; 1/4” I.D. (inches)TS705 Twin-Line S7, SAE 100R7; 5/16” I.D. (inches)TS706 Twin-Line S7, SAE 100R7; 3/8” I.D. (inches)TS708 Twin-Line S7, SAE 100R7; 1/2” I.D. (inches)
TS8E04 Twin-Line S8E, SAE 100R8, Non-conductive; 1/4” I.D. (inches)TS8E06 Twin-Line S8E, SAE 100R8, Non-conductive; 3/8” I.D. (inches)TS8E08 Twin-Line S8E, SAE 100R8, Non-conductive; 1/2” I.D. (inches)
TS804 Twin-Line S8, SAE 100R8; 1/4” I.D. (inches)TS806 Twin-Line S8, SAE 100R8; 3/8” I.D. (inches)TS808 Twin-Line S8, SAE 100R8; 1/2” I.D. (inches)
SPECIALTY
HOSE