1
347 Section 2 – Hydraulic QRC Tools, Hardware & PPE Air Tools Wash Down & Fuelling Blow Guns & Vacuum Sprays & Adhesives Clamps & Clips Hose, Tubing & Couplings Malleable Iron Stainless Steel Adaptors & Fittings Ring Main Systems Valves Pneumatic & Vacuum Equipment KELM™ Pneumatics Ind. Air Prep., Monitor & Test Pneumatic QRC Hydraulic QRC Hydraulics Telephone 01403 731 322 Fax 0845 463 2221 Email [email protected] www.hoses.co.uk discount online fluid power store www.hoses.co.uk Hydraulic Quick Release Couplings PVS Series, ISO 14540 Screw Couplings Standard: ISO 14540 Occlusion: ball Locking: screw Material: steel Finishing: Zn-Fe (Cr III) Threads: BSP, NPT Standard Seals: NBR Optional Seals: FKM, EPDM Connection Under Pressure: allowed (both male or female side) Max Residual Pressure: 100 bar Working Temperature: -25°C to +100°C Max Working Pressure: 700 bar Tech Sheet 20490 Coupling, NPT 0457 PVS3.0606.022 1/4” 6.3 700 PVS3.1006.022 1/4” 10 700 PVS3.1010.022 3/8” 10 700 Plug, NPT 0457 PVS1.0606.013 1/4” 6.3 700 PVS1.1006.013 1/4” 10 700 PVS1.1010.013 3/8” 10 700 ISO 14540 Protection Caps & Plugs Plug for Coupling 0457 SPVS.06100 ISO 6.3 Steel SPVS.10100 C ISO 10 Steel Cap for Plug 0457 SPVS.06101 ISO 6.3 Steel SPVS.10103 C ISO 10 Steel PFT1 Series, ISO 5676 Brake Couplings Standard: ISO 5676 Occlusion: flat face Locking: radial balls Material: steel Finishing: Zn-Fe (Cr III) Threads: BSP, SAE, metric Standard Seals: NBR Optional Seals: FKM, EPDM Connection Under Pressure: not allowed Maximum Working Pressure: 150 bar Tech Sheet 20491 Coupling, Female Thread 0457 PFT1.1310.002 3/8” 12.5 150 PFT1.1313.002 1/2” 12.5 150 PFT1.1318.102 M18 x 1.5 12.5 150 Plug, Male Thread 0457 PFT3.1313.213 1/2” 12.5 150 Plug, Male Thread Bulkhead 0457 PFT3.1318.503 M18 x 1.5 12.5 150 PFT3.1322.503 M22 x 1.5 12.5 150 VFF1 Series, Wing Nut Screw Couplings Interchange: Snap-Tite 78 Occlusion: flat face Locking: screw Material: brass and steel Steel finishing: Zn-Fe (Cr III) Threads: NPT Standard Seals: NBR Optional Seals: FKM, EPDM Connection Under Pressure: not suggested Max Working Pressure: 210 bar Coupling, NPT 0457 VFF1.2013.012 1/2” 19 210 VFF1.2019.012 3/4” 19 210 VFF1.2525.012 1” 25 210 VFF1.3031.012 1.1/4” 31.5 190 VFF1.3939.012 1.1/2” 40 170 Plug, NPT 0457 VFF1.2013.013 1/2” 19 210 VFF1.2019.013 3/4” 19 210 VFF1.2525.013 1” 25 210 VFF1.3031.013 1.1/4” 31.5 190 VFF1.3939.013 1.1/2” 40 170 VFH1 Series, Wing Nut Screw Couplings Interchange: Snap-Tite 75 Occlusion: poppet Locking: screw Material: steel Steel Finishing: Zn-Fe (Cr III) Available Threads: NPT Standard Seals: NBR Maximum Working Pressure: 350 bar Tech Sheet 20493 Coupling, NPT 0457 VFH1.2019.012 3/4” 19 350 VFH1.2525.012 1” 25 350 VFH1.3031.012 1.1/4” 31.5 350 VFH1.3939.012 1.1/2” 40 350 VFH1.5051.012 2” 50 350 Plug, NPT 0457 VFH1.2019.013 3/4” 19 350 VFH1.2525.013 1” 25 350 VFH1.3031.013 1.1/4” 31.5 350 VFH1.3939.013 1.1/2” 40 350 VFH1.5051.013 2” 50 350 Working Temperature: -25°C to +100°C Working Temperature: -25°C to +100°C Working Temperature: -25°C to +100°C Optional Seals: FKM, EPDM Connection Under Pressure: allowed (both male or female side) Max Residual Pressure: 100 bar Plug for Coupling Cap for Plug Tech Sheet 20492 Wing style screw to connect, 5,000 psi/350 bar working pressure, heavy duty design, high flow rate, heavy duty acme threads. VFH1 series has an universal design that can be used in any industry, used frequently in oilfield applications, applications needing high working pressures and high flow rates, oilfield services such as coiled tubing units, snubbing units, power swivels and much more.
