Calumet's sampling and testing procedures in effect at the time of production will be used for certification testing. Results may be based on tank certification, manufacturing data, periodic testing and/or most recent product restock. Typical values only represent the values one would expect if the property were tested in our laboratories with our test methods on the specified date. Some product properties are not frequently measured, and accordingly typical values are not based on a statistically relevant number of tests. The information in this document relates only to the named product. The user is solely responsible for all determination regarding any use and any process.
HYDROCAL™ NAPHTHENIC BASE STOCKSHYDROCAL™ naphthenic base stocks are produced exclusively by Calumet Specialty Products Partners, L.P. using a multi-stage hydrotreating process operating at pressures above 2500 psi. This process offers the unique ability to produce naphthenic base stocks that meet currently established performance standards.
The HYDROCAL refining process selectively saturates certain subgroups which results in the production of very high-quality, stable base stocks. HYDROCAL products pass the IP346 Standard and do not require labeling as carcinogenic under the OSHA Hazard Communication Standard. Further quality control practices that Calumet implements on crude oil selection and subsequent refining processes assure consistent uniformity and product performance.
HYDROCAL base stocks are available in viscosities ranging from 38 - 2400 SUS @ 100° F.
TECHNICAL ASSISTANCE
SHIPPING LOCATIONSPrinceton, Louisiana
Burnham, Illinois
* Shipped in trucks or rail cars.
* Drums/Totes available on special request.
Calumet can custom blend to meet specific customer requirements
For product or technical questions contact your Sales Representative or Calumet Product Support.
Calumet's sampling and testing procedures in effect at the time of production will be used for certification testing. Results may be based on tank certification, manufacturing data, periodic testing and/or most recent product restock. Typical values only represent the values one would expect if the property were tested in our laboratories with our test methods on the specified date. Some product properties are not frequently measured, and accordingly typical values are not based on a statistically relevant number of tests. The information in this document relates only to the named product. The user is solely responsible for all determination regarding any use and any process.
HYDROCAL™ NAPHTHENIC BASE STOCKSPRODUCT DATA SHEET
*All product specifications are typical values, unless otherwise noted.
