IM Series Counter Service.pdf

8/9/2019 IM Series Counter Service.pdf

1/14

Avery Weigh- Tronix Technical Specification IM Series

Overview

General Description

The IM series provides a range

of counter scales to cover the

different requirements of fresh

food counters, self-service,

pre-pack areas and point of sale

areas for supermarkets and

speciality stores.

These terminals may be used

in stand-alone mode or linked

together to form networks.

In addition, the different

departments can be linked

together and connected to a

back office computer, to form

store-wide, centrally managed

networks.

The scales can operate in a

number of different modes,printing individual labels for

each item or combining the

shoppers items together and

printing a single receipt.

Build Types and

Description

IM 100

Monobloc scale - a compact

weighing terminal withintegrated vendor and

customer display.

42 pre-set key keyboard.

IM 202

Head up Display (HUD) for both

the customer and the vendor

are mounted on the tower.

This model features an

extended, 60 pre-set key

keyboard.

IM 300

Self-Service scale providing 80

pre-set, assignable keys placed

on a large keyboard mountedon the display column. An

additional 80 key keyboard can

also be added providing a total

of 160 keys.

The keyboard provides full

travel keys with a side loading

protective envelope allowing

insertion of a product-legended

keyboard. Keys can be doubled

or arranged in groups of four to

allow larger sized keys.

IM 400Two-piece scale with the

keyboard and both displays

mounted on the tower column.

This maximises eye-level

interaction between operator

and customer. 40 key preset

keyboard.

IM 500

The hanging scale is bracket

mounted with attached

suspended weighing plate.

Integrated printing mechanism.

40 pre-set key keyboard. A pole

kit is available as an accessory.

IM SeriesCounter Service Scales


2/14

Dimensions IM100 (w x d x h) 374 x 407 x 169mm - 14.7 x 16.0 x 6.7 in

IM202 (w x d x h) 374 x 444 x 535mm - 14.7 x 17.5 x 21.1 in

IM300 (Single keyboard) (w x d x h) 374 x 444 x 612mm - 14.7 x 17.5 x 24.1 in

IM400 (w x d x h) 374 x 346 x 530mm - 14.7 x 13.6 x 20.1 in

IM500 (Not including hanger and pan) 372 x 346 x 344mm

(w x d x h) 14.6 x 6.1 x 13.5 in

Feet Spacing all models except 270 x 234mm

IM500 (w x d) 10.6 x 9.2 in

Capacities Standard IM 100 - 400 IM500 15kg AVR - 30lb x 0.01lb 15kg x 5g

Cost option IM100 - 400 x 0.01lb 6kg AVR, 12kg x 2g, 30kg x 5g, 50lb

Power Consumption Non Printing 18VA

Connections RJ45 Ethernet, RJ12 Cash Drawer,

proprietary serial, 2 x USB

Memory Size 1.5MB

No. PLUs 6000 @ 16 chars/plu

Networking Interscale Ethernet 10/100 base-T, max 10

scales per network, max. 20 operators

Interscale network resilience Back up server

Host i/f Ethernet 10/100 base-T

Number host networks/servers unlimited

WiFi Optional self fit module 802.11b/g compliant

Display Operator Blue LED backlit, dot matrix, 192 x 64 pixel

Customer Blue LED backlit, dot matrix, 192 x 64 pixel

Keyboard Type Pressure sensitive with tactile domes on

number/function keys

No. preset PLUs 42 on IM100, 400, 500 - 60 on IM202

Self Service keys - type Tactile, full travel keys beneath membrane

No. Self Service Keys 80 single IM300 keyboard

160 optional dual IM300 keyboard

Printer Type Thermal Label/Receipt

Roll diameter/width Max. 100/60mm or 4/2.4 in

Speed Max. 80mm/s or 3.1in/s

Labels Print dimensions (w x l) Max. 56 x 160mm or 2.2 x 6.3 in

Graphics Yes, max. 5

No. Fonts 24

No. Formats 12, all flexible

Label orientation 0, 90, 180

Field orientation 0, 90, 180, 270

Print boxes, frames, lines Yes

Operating Modes Label, Receipt, ECR, Prepack

Barcodes Barcodes supported EAN 8, UPC 12, EAN 13, UPC 13,

Scandinavian, EAN128, RSS Expanded

(GS1 Databar), RSS14, RSS Limited

IM Series Avery Weigh- Tronix Technical Specification

At a Glance Specifications

2


3/14


Traceability No. schemes 3

GTIN support Yes

Batch weight Yes

Expiry date Yes

Carcass Records 99Other software 2 PLU text areas, 1500 characters each, Support of: Promotions, Nutripanels, Dual

features currency pricing, PLU search, Audit Trail and transaction collection, 3 security levels, 10

departments, 21 sales messages, 4 tax rates, 9 tares, 9 discount rates, 5 payment keys,

Vertical scrolling messages, Cash up.

Hardware

Processor/Memory

All IM series scales use an ARM,

32-bit processor.

All user-programmable data

is stored in reprogrammable

Flash memory. The number of

PLUs supported is dependant

on the average text size, number

of totals used etc. Typically,

there will be sufficient memory

for at least 6000 PLUs

The following table clearly lists

the average text size in relation

to the number of PLUs available.

The table shows PLU capacity

with two totals types per PLU

and eight totals types per PLU,

according to different average

text size. Up to 12 totals types

could be stored per PLU (sales,

counter, pre-pack, override,

return and promotions). Each

total type can be stored across

two reporting periods.

Other factors which affect PLU

memory size include:

Receipt memory

Transaction per receipt memory

Diagnostic log size

Traceability record memory

Traceability totals memory

There is an additional, separate

flash memory which is used for

the application software and

factory default data. This ensuresPLU memory capacity remains

unaffected by software updates.

Displays

All IM series customer and

vendor displays are blue LED

backlit, LCD dot-matrix 192 x

64dot resolution displays.

The top left-hand corner of the

display is reserved to display

the model number. Metrological

data is displayed in the box next

to this.

Different character sets can be

supported for various countries,

including Latin, Greek, Cyrillic

and Arabic.

Displays can be adjusted for

different lighting and viewing

angles, via a contrast adjustment

in management mode.

Display annunciators emphasise

the current mode of operation,

including: fix/pre-pack, net/tare,

price base and zero. These

modes are dependant on

the market.

The unit price field allows up

to four digits before a thousand

separator is displayed.

Printers

The IM series printer is a heavy

duty label and receipt printer,

with a single motor driving both

the paper feed and paper rewindsystems. Receipt tally roll, die

cut labels or continuous sticky

paper can be used.

The paper roll is loaded onto

the spindle and the paper

passed through the large

aperture at the rear of the open

print mechanism. The single

large aperture through which the

paper is fed at the rear of the

print mechanism means paper

changes are quick and simpleand makes it virtually impossible

to feed the paper through the

printer incorrectly.

To ensure the print head can be

easily cleaned, the print head is

raised well clear of the lower

body when in the open position

ensuring good access. This easy

maintenance feature encourages

cleaning to be carried out and the

life of the print head optimised.

The printer also auto-rewinds

before printin commences,

ensuring a minimum of dead

space on the label or receipt.

3

1.5 MB 2 Totals 8 TotalsAverage Text Size No. of PLUs No. of PLUs

16 6000 6000

24 6000 6000

50 6000 5557

100 6000 4736

250 4167 3334500 2557 2217

750 1852 1667

1000 1447 1331

1250 1191 1111

1500 1009 951


4/14


Metric Imperial

Maximum Roll Size 100mm 4 in

Maximum width 60mm 2.5 in

Maximum print width 56mm 2.2 in

Print speed 80mm/s 3.1 in/s

Printer specification:

Keyboards

The IM series keyboards fitted

to the scale are hard-wearing,

touch sensitive, wipe clean

keyboards with raised pre-

programmed and digit keys.

The raised keys give a near

tactile feel when used and give

the operator feedback that their

finger is located correctly on

the key.

The IM series keyboard is

available in two options, a 66

key variant for all versions where

the display and keyboard are

mounted together, and an 84

key variant for the IM 202 head

up display version.

The raised section of the

keyboard has a number of pre-

programmed functions assigned

to it (eg: 0-9, Clear, Test, Enter,

Total / Print, Add, Tare, etc).

Each variant also has a

user-programmable area of 42

(IM100, 300, 400, 500) and 60

(IM202) keys.

The user programmable areas

comprise of hard-wearing, tear-resistant transparent pockets

under which a user-defined

insert may be slotted into place.

Four tough, flexible plastic

inserts are supplied with the

scale. They can be written on

with a non-permanent felt

marker which can be erased if a

change to the user-programmed

key is made in the future. The

reverse side of the insert

contains all keys required when

programming the scale.

Latin, Greek, Cyrillic and Arabic

character sets are delivered,

one on each insert. The insert

is retained at the lower edge

by two ridges in the plastic

moulding.

Self-service keyboards for

IM 300

The IM 300 is delivered with an

80 key self-service keyboard.

This is mounted on a metal

baseplate that sits beneath the

scale. An optional second

keyboard can also be ordered

providing a total of 160 keys.

This mounts to the same

baseplate.

The keyboard itself consists

of full travel keys, with a

transparent keyboard pocket

that accepts a keyboard insert.

Keys may be grouped in any

combination of fours, twos or

singles, providing full flexibility

for larger keys where required.

Weighing Capacities

The IM series scales areavailable in the following

standard capacities :

For IM 100, 202, 300, 400:

30 lb x 0.01 lb

50 lb x 0.01 lb

6 kg AVR

12 kg x 2 g

15 kg AVR

30 kg x 5 g

For IM 500 hanging scale:

15 kg x 5 g

30 lb x 0.01lb

Power Supply

The IM scale has an external

plug-mounted power supply

rated at 100V/60Hz to

240V/50Hz. This connects to

the underside of the scale. The

cable can be held in a clip at the

rear of the underside to providestrain relief on the DC connector.

The use of the external power

supply makes the scale a low

voltage device, and reduces

power consumption.

All variants are supplied with

interchangeable plug heads to

suit the vast majority of socket

types worldwide. Additionally,

the plug head can be removed

and a flying lead attached to theIEC C7 power connection of the

power supply. This is useful if

the power cable is of insufficient

length or there is insufficient

space at the power socket for

the power supply.

Scale Interfaces

USB Ports

All models feature two USBports, with USB V.1.1 being

supported. On IM 100, 202, 300

and 400 models, one port is

located beneath the scale, one

is located in the printer

compartment. Typically, the port

located beneath the scale may

be used for scanner input.

The port located in the printer

compartment is typically used

for data transfer with a USB

memory stick.

4


5/14


On the IM500 one USB port

is located beneath the

connector/WiFi cowl on the

top of the machine and one

is located beneath the

connector/WiFi cowl on theoperator side of the machine.

Cash Drawer Interface

All models feature an RJ12

connector for use with a 12

or 24V cash drawer.

Inter-scale Network

and Host Computer

Interfaces

A maximum of 10 scales may

be linked together in a single

network.

All communications are based

on standard 10/100-BaseT

Ethernet networking. Ethernet

cabling standard IEEE802.3

defines cable type, length and

equipment.

TCP/IP is the language or

protocol, by which all devices

communicate.

Within a single network, scales

are configured in a Client/Server

configuration, with all scales

sharing the same Ethernet port

address.

Any scale can be configured as

the Server and all scales contain

the full PLU and data file.

As all scales are connected

directly into an Ethernet hub,

no wiring short-circuit can bring

down the scale network, adding

significantly to network

resilience.

Each scale may even be

connected to a local

Department HUB. Where

connection to the office

computer is required, each HUB

may then be connected to thestores Ethernet HUB in the

wiring closet.

This HUB provides the

connection to the back-store

management PC via Ethernet

cabling.

Alternatively, full Category 5

structured cabling may be

employed, with every scale

being directly connected toa single hub system within

the store.

A back-up server, providing

automatic server switching and

subsequent automated recovery

of the network, off line-sales

and synchronisation of PLU

files, should the main server go

down, can be assigned. Full

ethernet connection via

gateways and subnet is

supported.

Within a single store-wide

Ethernet system, multiple scale

networks can be configured,

with each having a unique port

address.

In this scenario more than a

hundred IM series scales can

linked into the stores Ethernet

hub, with each Server talking

independently to its ownnetwork of client scales.

The IM series range also allows

host names to be specified for

a particular scale for use in

conjunction with DHCP and

DNS. The host name to be

programmed can be up to 100

characters.

The TCP/IP protocol enables

simple remote diagnostic toolsfrom head office, such as the

Ping feature.

RF Communications

IM series scales are compatible

with most common Spread

Spectrum Radio Frequencysystems.

This enables the use of RF for

communication between the

PC located in the management

office and the counter scales

in the store.

Multiple network configurations

are possible using either only

RF or combinations of RF and

direct cabling communications.

For further information, see theIM series RF Communications

Data specification sheet.

System Resilience

and Networking

In both LAN and RF networks,

the back-up server mirrors the

main server and automatically

takes control if the main serverfails. When the communication

with the server is restored,

transactions are automatically

recollected from local mode and

the totals are regenerated.

Configurable Network Error

Alarm An audible alarm warning

of network errors can be

disabled in sales mode.

A flashing message appears

on the vendor display when

the scale is experiencing

communication problems.

5


6/14


Software

This section defines version 7

software operation of the IM

series system scales.

Operating Modes

Label Mode

IM series scales operating in

label mode are generally used

for single item, weighed or

non-weighed transactions.

In label mode, the system can

be set to Print on Request

(press the Print or Operator

keys) or Immediate (as soon

as the weight is steady).

Self-Service Mode

IM series scales can be set into

self-service mode where they

are intended for the general

public to weigh and label their

own produce. When in self-

service mode, IM series scales

prompt the customer to select

item from the keyboard, beforeplacing the produce on the scale

and pressing the print key to

print the label.

By setting the scale to print

immediate, the label can

automatically be issued after the

produce is on the scale, without

having to press the print key.

Pre-pack

Pre-pack mode enables anumber of consecutive labels to

be printed for each selected

item. For this reason, the

selected item - along with any

tare details, are retained until

cleared.

In general, an item is selected in

the standard way and the details

are automatically fixed - with a

label being printed each time the

weight changes and then returns

to a steady weight again.

To cancel that item, press the

clear key until the Enter PLU

message is displayed.

Direct entry to Pre-pack mode,

by pressing the Fix key, can beenabled in system configuration.

Label Formats

Label formats can be pre-set for

a scale or may be set for each

individual item.

Up to 12 label formats can be

set up, with standard default

formats being pre-set into each

IM series on delivery. Every

label format can be modified inService mode, or using label

format editors in MX050 (the M

series support tool) or MX4X0

(retailer management package).

Up to 50 fields of information

can be printed on each label

format.

Legends such as those for the

current date, expiry date, price

per kg and total price values

may be configured to print

automatically.

Sales messages may be set

against a PLU and printed on

labels, within sales message

fields.

Label lengths can be from 160

mm to as short as 40 mm and

may be printed in 0, 90 or 180

orientation.

Printing can be set for individual

thermal labels or to print on

continuous, sticky paper

(enabling short and long labels

to be printed for different

products).

Receipt Mode

Receipt mode enables the

operator to float up and down

a counter from one scale to

another, producing one receiptfor the complete set of

transactions.

Up to 20 operators may be live

on the network at any one time,

with name and number printing

on the receipts.

Each item in the scale isassigned to that operator and

finally printed by pressing the

Total key.

Transaction details printed on

the receipt include; store header

details and optional logo,

operator details, date / time /

terminal / receipt number,

number of items, total value

and any tax elements.

A barcode may be printed at

the bottom of each receipt.

This barcode can contain

receipt-specific information

such as total value, receipt

number or customer number.

It can be scanned at the point

of sale in a system network to

instantly recall transactions,

thereby saving time and

increasing customer throughput.

Individual line details, including

description, weight or quantity,

unit price and price to pay are

also printed.

Single Item mode may be set

up which automatically prints

a full receipt after each item

transaction is completed.

The void function enables the

complete sale or any individualline to be cancelled and the

voided transactions are

identified on receipt print outs.

By including the Department

or Group in the receipt barcode,

sales may be limited to items

from the same set only

(department interlock feature).

Sales/management functions

are protected via operator PINcodes to ensure that only

authorised operators have

access to those functions.

6


7/14


8/14


To maximise efficiency of PLU

maintenance, the operator may

configure the actual fields

displayed to the user during

PLU maintenance, disabling

those which are not required(e.g: remove label fields if the

scale is only to be used in

receipt operation).

Label and receipt text can be

programmed in font sizes

ranging from 1 to 8 and from

A to L.

See IM series Label Printing

Formats Specification for font

designs.

Promotions

A PLU may be programmed with

one of the following types of

promotion:

Price Promotion:Applicable to

both weighed and non-weighed

products and allows a 2nd price

to be automatically applied

when either a certain weight or

number of items of a product

are sold.

Weight Free Promotion:

Applies to weighed products

only and allows a configurable

amount of weight to be sold free

of charge, when the total weight

of the product is above

configurable amount of weight.

Items Free Promotion:Applies

to non-weighed products only

and allows a configurablenumber of items to be sold

free of charge, when the total

number of items is above a

configurable number of items.

Discount Promotion:

Applicable to both weighed

and non-weighed products

and allows a discount value to

be automatically applied to the

transaction value when a certain

weight or number of items

are sold.

Frequent Shopper Promotion:

Applicable to both weighed

and non-weighed products

and allows a product to be

programmed with a second

fixed price which is thenprinted on the label in addition

to the original price. Customers

who are part of a stores

frequent shopper program, are

charged at the frequent shopper

price at the point of sale. The

barcode printed on the label

containing a frequent shopper

promotional price will contain

the original standard price.

When a PLU with a promotionis selected, the product

description on the display

will flash to indicate this to

the vendor.

A promotional message advising

of the actual promotion can also

be set against each PLU for

display and printing purposes.

All of the above promotions

except the frequent shopper

promotion can be used in label

and receipt modes. Frequent

shopper can only be used in

label mode.

Nutritional Information

Each PLU can be provided

with nutritional information if

required. A list of nutrients

needs to be programmed first,

against which, values are then

programmed in the PLU

records. Nutrient information

can be programmed to print

either on the same product

label, or on a separate label.

As well as being able to print

individual nutrient values per

product, the standard measure

(normally 100 g) values and RDA

values can also be printed.

Departments

You can create up to 10

departments each having a 20

character description.

All products are allocated to a

specific department.

Messages

Up to 99 scrolling or flashing

messages may be programmed,

of up to 200 characters each.

You can assign each scale to

display one of these messages.

Up to 20 sales messages may

be programmed, and these can

be called-in to print on labels,where a field has been set up for

this purpose.

Tables

The following data tables can

be programmed.

Tax

3 tax rates can be programmed,

with up to two tax rates being

assigned to PLUs.

Tares

Up to 10 tare weights can be

programmed which can be

assigned to PLUs for use as

preset tare values or assigned

to keys for recall in normal

operating mode.

A tare interlock can be used to

ensure a label is only printed if a

tare has been selected.

Tares may be configured as self-

cancelling (one-shot) or fixed.

Additionally, semi-self-

cancelling, cumulative,

accelerating or proportional

tares may be programmed.

8


9/14


Payment Tables

Payment tables includes local

cash, foreign cash, credit

card, account, coupon or

general. A selection of paymenttypes are available by scrolling

with the arrow keys, entry is

accepted by pressing the

enter key.

Discount Tables

A maximum of 9 discount rates

are programmable. A maximum

of 16 displayed characters may

be entered for describing the

discount rate. The discount

value may be disabled orentered as a percentage or

value. The security level is

applied for discount protection

when operating the scale in

sales mode.

Add Label

You can assign one of the

standard label formats to be

printed as the add label format,

or this can be set to print in a

receipt style.

Logos

Up to 5 different logos may be

stored and used. Logos are

loaded into M series scales

using MX050. A logo report can

be printed showing all logos

stored in the scale. The scale

contains the statutory safe

handling and nutritional data

logos required by law in the

United States of America bydefault.

Logos can be used for a variety

of applications including printing

on labels or receipts as store

logos, and for promotional

purposes.

Barcode Types and Formats

The M series range is able to

support the following barcode

types:

EAN 13

EAN 13 Scandinavian.

EAN 8 - mainly used in Europe

UPC 13

UPC12

EAN 128

RSS expanded

RSS stacked

RSS 14

RSS limited

The following data may be

encoded in the barcode: articlenumber, price, weight, trace

code, operator number or

department number, group and

transaction number. SSCC data

is also supported.

Weighing and traceability type

application identifiers are

supported by EAN 128 and

RSS barcode formats.

Barcodes may be programmedto print on receipts, labels,

talons or combinations thereof.

The Add label barcode format is

that which is programmed for

that machines receipt.

Each PLU may be programmed

to use one of 10 configurable

barcode formats.

OperatorsThe multi operator system

enables a max of 20 live

operators in a network.

Floating operator system

enables each operator to work

on any scale in a system at any

time.

Header Message

(for Receipts Only)

The message printed at the top

of receipts can be programmed

at any scale and is transmitted

to all scales in a system,ensuring all machines print

identical headers.

The header message has up to

200 characters of text and may

be printed multi-line, across the

full width of the receipt.

A logo can also be used in

addition to, or instead of, the

header message and is printed

at the top of the receipt.

Trailer Message

(for Receipts Only)

The trailer message printed

at the bottom of receipts is

programmed at any scale and

is transmitted to all scales in a

system, ensuring all machines

print identical footers.

The trailer message has up to

200 characters of text and may

be printed multi-line, across the

full width of the receipt.

A logo can also be used in

addition to, or instead of, the

trailer message and is printed

at the bottom of the receipt.

Re-Pricing

The re-pricing mode is a

non-PLU associated method of

printing labels, with pricing and

barcode information which are

adhered over a products

original price and barcode

information. The re-price

function requires setting up

with default label information,

barcode format, whether packs

will be weighed and if totals are

required to be stored or not.

9


10/14


Traceability

IM series scales feature

comprehensive options for

all types of traceability

requirements. Up to threedifferent traceability schemes

may be individually

programmed, allowing

associated products to be

tracked through their supply

chains. Scheme options include

the ability to print user-defined

trace information, manual or

scannable methods of data

input and the ability to

reproduce traceability

passports. All schemes can be

used in either label or receiptmodes, allowing counter or

pre-pack service operation.

Security Levels

Programming Security Levels

for Management Functions

The system has 3 security

levels: 0 - no security up to

2 - highest level.

Functions assigned to securitylevel of 0 will have no security

ie: they can be accessed by

any user.

Each operator can be given

security level 0 - 3. Every

exceptional sales function (e.g.

Void, Refund) can be set to

require PIN authentication: level

0 - 3. If set > 0 for a selected

function, system prompts for

the Operator number then the

PIN code.

If the Operator security level is

greater or equal to the function

level, the transaction will

proceed, but, if the operator

security level is less than the

function level, the scale prompts

for a supervisor.

All management functions

operate on similar security

levels.

Security Levels for Operator

Functions

Operators are programmed with

security levels between 0 - 3.

Operators are allocated

personal PIN codes that theycan change on a regular basis,

via a PIN key which may be

assigned to the keyboard.

Programming Security Levels

for Sales Functions

Security levels of sales functions

are set up by scrolling through

the sales functions in

management mode and

allocating them with security

levels 0 - 3. These functionsare initially set up with

default levels.

Security Log

The security log is a report

which shows functions that

have been carried out above a

user-entered security level. For

example, a report printed for

security level eight would print

each level eight and nine

function was carried out, with

the date, time and the name

of the operator who performed

the function.

System Functions

Audit Mode

Audit mode is either enabled or

disabled in manager mode.

Audit mode contains functions

like filtering, server buffer, client

buffer, Audit Report and erase

Audit list.

The filtering option allows the

operator to select which printing

modes transactions should be

stored, i.e. Label only, Receipt

only or Label and Receipt

transactions.

The server buffer is configurable

to store receipt or label

transactions in a linear

or circular format.

Linear can only hold adetermined number of

transactions and advises

the operator when full.

A circular buffer will

continuously write over

transactions on a first in, first

out basis when the memory

becomes full.

A transaction buffer size can

be changed in Service mode,

on installation.

Receipt Weight Mode

If required, the total weight

of each receipts weighed

transactions can be printed

at the bottom of the receipt.

Last Subtotal

When enabled, last subtotal

allows operators to recall the

value and number of

transactions from the last receipt

they transacted, to the display.

Reprinting of the receipt is

possible by pressing the Total

key. Note that this receipt is

marked as a duplicate copy.

Pre-Pack PLU Lock

Dependent upon the setting

of the pre-pack PLU lock, in

pre-pack mode, PLUs may need

to be cleared before a different

PLU can be called via thepre-set keyboard. If they are

required to be cleared, set as

enabled. If they are not to

cleared, set as disabled.

Security Log Level

Any functions with a security

level equal to or higher than

the value entered here, will

be printed in the security log.

10


11/14


Summary Receipts

For networked receipt

printing machines to work in

customer,system or receipt

scan mode, summary receipts

is required to be set tosubtotal. This results in

subtotal receipts being

produced, which can be

recalled using the customer

number printed on the receipt,

at the PoS.

Customer Number

This can be set to be manually

entered or system generated.

The customer number is only

printed on summary receipts.

Machine Data

Pre-set Key Assignments

(Dedicated Keys)

The free-programmable (pre-set)

keys may be set to any

combination of functions,

including PLU, tares,

Departments or Operators.

Standard assign; includes PLU,

Operator, Log, PIN, Tax,

Department, Tare, Prop. Tare,

Dual Capacity, Euro, Return,

Discount, Sub - total and Hash,

Hand Price Keys, -UP/PLU

Positive Non-weighed, Negative

Non-weighed, Carcass, Code,

Stock, Weight Override,

Checkout Operator, Customer

Number and Consecutive

Number, PLU search.

ECR assign; consists of up to 5

payment references, No Sale,

Float, Pick up, Paid out,

Received on Account and

Refund.

The pre-set keys can be re-titled

by applying adhesive labels to

the operators overlay or by re-

printing the complete keyboard.

MX050 enables keyboards to be

designed and printed.

Function Keys

The PRINT key can be set to be

used to print total (non Pos and

PoS), receipts or subtotal

(non-itemised) receipts (for

use in customer, systemor receipt scan modes).

Data Back-up

This mode includes the

following functions :

System Dump/System Load;

Includes the transmitting of the

following data sent to or from ascale or PC running the MX050

support tool: PLUs, logos,

carcass tracking data, ADD

label info, tax rates, stored

tares, Euro rate and symbol,

label formats, scroll messages,

sign-on/off messages, store

name, operator numbers,

network ID, departments,

nutritional information, sales

messages and discounts.

Machine Dump/Load; Includes

the transmitting of the following

data sent to or from a scale;

Machine identity, key

assignments, key set-ups,

printer set-up, print modes,

trace code, symbols, custom

menus, label mode, label type,

label detect, tare interlock,

barcode assignments, Euro print

set-up and display contrast.

Totals Receive; performs

a backup file of the totalsinformation produced from

the scale.

Reports

Data Reports

The following reports may beprinted on receipt paper, for

data management purposes:

PLU file list, operators report,

text report, discount list, security

level, payment key list, account

list, promo batch list, carcass

reports, barcodes, logos, tax

rates, tare weights, AIs,

nutrients, batch reports,

traceability totals, keyboards.

Any data report can be haltedby pressing the Clear key.

Sales Reports

Reports are available on the

following:

PLU totals (with option to

enter a start and end range)

Operator (optional range)

Grand totals

Department (optional range)

Machine

Hourly (// hour or hour)

Group (optional range)

Discount totals

Promotion totals

System cash

Security

11


12/14


Carcass (lists an audit trail of

the last 100 carcasses used,

showing the total weight

packed, the value and the last

date on which that carcass

was used)

Single (X/Z) report periods,

enable daily plus weekly

reporting.

Totals Batching

All of the above totals reports

from any period may be batched

together to allow up to nine

different reports to be printed at

the press of a button. Up to five

batches may be programmed,which are then assigned to a

key on the keyboard.

Audit Reports

Audit reports print out

transactions which have been

totalised and printed on the

label or receipt during sales

transactions.

On networks operating in

customer or system mode this

is the PoS receipt. Transactions

are printed either from the last

clearing date or from the

date/time specified by the

operator.

The operator may clear the audit

transactions at the end of the

printout. The operator may

choose between a full or

summary report.

Audit reports may be configured

to be printed out as a summary

or in detail, selected by time,

receipt number or filter for

transaction type.

The summary report shows the

total value and number of

transactions for each receipt

and the grand totals.

It is possible to clear or print

outstanding transactions (e.g:

unreconciled receipts at the end

of the day) or clear all totals

(normally only when a system

is being set up to go live).

Service Mode

This mode includes the

following functions, accessible

by entering the service PIN

number during the power-on

countdown:

Diagnostics, Configuration,

Country Config., Calibration,Site Gravity, Manager PIN,

Service PIN, Euro Set-up, Clone

Machine and Label Editor.

PC Based Systems

Software

Management

Packages

Brief overview of the PCapplications available for

support or retailer use.

MX100

MX100 has been specifically

designed to provide a

transparent interface between

the retailers primary Store

Management module (generally

the EPoS system), and themixture of scales in the various

departments within the store.

MX100 is designed to run on the

same computer as the

management module, but in

the background.

This solution allows the retailer

to control the prices and

product range in both the EPoS

and the scale systems from theHead Office.

MX100 also provides for the

collection and return of scale

sales reports, as well as

enabling a detailed audit

trail of transactions.

How does MX100 work

- The MX100 is installed on

the local store management

system.

- MX100 processes the

incoming product change

file and validates its integrity.

- The validated file is

communicated to the scales

via the driver.

MX400

MX400 is a dedicated scale

management system, providing

functions not generally found in

retail business management

software (such as extended text

editing and label design).

It provides a safe and securemethod of maintaining scale

data and recovering trading

information. Used for the

following applications:

- In store scale Management

system

- Support for WA and WS

wrappers, IM, M and MP series

- Management of product data

- Configuration of scales

- Historical Reporting on totals

12


13/14


13

System Support

Application: MX050

The MX050 software programme

enables authorised staff toretrieve, edit and store and

return label formats, amend text,

create keyboards and transmit

logos and other data files to

and from scales.

MX050 can also provide

diagnostic and remote control

of distant M and IM series

installations.

Remote MX050 operation ispossible via modem or ethernet.

See MX050 specification sheet

for more information.

Kits

The following kits are also

available for the IM series range:

All Models:

C924000000AB0000-

Low profile stainless steel cashdrawer

AWT05-053028-

Economy Cash Drawer

AWT05-052964-MS9520

Metrologic Voyager USB

Hand Scanner

AWT05-052965-MS3780

Metrologic Fusion USB Handheld

omnidirectional scanner

AWT05-052966-MS7120

Metrologic Orbit Presentation

scanner

IX1001AE00000000-

G Pan Kit

IX1001AF00000000-

12 IN L2 Scoop Kit

IX1001AG00000000-

16 IN L2 Scoop Kit

IX1001AH00000000-

Scoop Cradle Kit

AWT05-05313-

IM RF KIT D Link

AWT05-053032

IM RF Kit - No D Link

AWT05-053013-IM RF Kit - D Link for IM500 only

AWT15-000102-

IM RFKit -NoD Link for IM500 only

AWT15-000054-

Circular pan kit

AWT15000092-

Telescopic pole kit

Other Information

Paper Type

For a full description of the label

material specification to be used

with the IM series, please refer

to the Thermal Label/Receipt

Material Specification for IM

series.

Electrical

Requirements

Mains Supply

Single phase, AC.

Europe: 220 V - 240 V

(-15% + 10%) at 50 Hz

or 60 Hz.

USA: 110 V - 120 V at 50 Hz

(-15% +10%).

Approximate Consumption

160 VA (when printing).

18 VA (when not printing)

Supplied with two metres, three-

core mains cable with moulded

power adapter.

Mains ON-OFF switch on scale,

accessible by the operator.

Safety Standards

The IM series range fully

complies with CE requirements,

including EMC directives in BS

EN60950.

The USA safety standard is

UL 1950 and Canada CAN22.2

950.M99.

Housing and

Environment

IM series models share the

following exterior appearance:

- A wipe clean, textured gloss

surface, designed to provide

easy peel-off of labels.

- High UV resistance for good

colour stability.

Operating Environment

Resistant to dust abrasive

environment.

Resistant to salt water.

Resistant to blood and

animal fats.

Operating Temperature Range:

-10 C to +40 C.

Storage Temperature Range:

-30 C to +70 C.

Humidity

10% to 98% RH.

Weights

IM 100 = 6 kg

IM 202 = 7.4 kg

IM 300 = 12.2kg (including

single keyboard)

= 15kg (including double

keyboard)

IM 400 = 8.2 kg

IM 500 = 13.5 kg (including

hanger and pan)


14/14


Foundry Lane, Smethwick,

West Midlands, England B66 2LP

Tel: +44 (0)870 90 34343 Fax: +44 (0)121-224 8183

Email: [email protected]

Internet: http://www.averyweigh-tronix.com

Avery Berkel Limited 2007..All rights reserved.This publication is issued to provide outline i nformation only which,unless agreed by Avery Berkel Limited in writing,may not be regarded as a representation relatingto

the products or services concerned.Avery Berkel Limited reserves the right to alter without notice the specification,design,price or conditions of supply of any product or service.

Your local distributor:

IM 100

Net: 14 kg.

Gross: 17 kg.

Measurement:

480 mm x 460 mm x 270mm

Number of Packages: One

Harmonised Commodity Code:

8423181 50 0.

IM 202

Net: 16 kg.

Gross: 21 kg.

Measurement:

572mm x 460mm x 585mm



8423181 50 0.

IM 300

Net: 20 kg.

Gross: 25 kg.

Measurements:

480 mm x 460 mm x 270mm

910 mm x 510 mm x 250 mm

Number of Packages: Two


8423181 50 0.

IM 400

Net: 16 kg.

Gross: 21 kg.

Measurement:

495mm x 460mm x 585mm



8423181 50 0.

IM 500

Net: 18 kg.

Gross: 23 kg.

Measurement:

600 mm x 475 mm x 675 mm



8423181 50 0.

Shipping Specification

303 374

407 374

215

234 270.5

169 Min

181 Max

195

396

84

303

496

374

234270.5

245

245

121

195

444

131

169 Min

181 Max

396

157

303

346 374

52.4234

33 275

260

244

117

140

169 Min

181 Max

Dimensions

IM100 IM202

IM400

372 156

310

344

398

743

93

398

IM500

374

361

294

428

270.5

195

303

67

407

234

215

85

19

169 Min

181 Max

IM300

Date post:	01-Jun-2018
Category:	Documents
Upload:	carlos-castillo-urrunaga
View:	253 times
Download:	0 times

IM Series Counter Service.pdf

Documents