Important Comment used in AutoCAD 2D Khmer Guide

GREEN TOWN - 1 - Auto Cad 2D

By Mr. Ol Sochet - 1 - Architect & Interior Design

COMMAND LINE

LINE KWCa Command mYysMrab;KUr)anCabnÞat;Rtg;mYyehIybnÞatRtg;;enaH Segment rbs;vaminCab;KñaeT.

1.1 KUrbnÞat;Rtg;mYyedayeRbIBIrcMnuc

1.2

rebóbeRbII :

- Command : L ( Line )

- Specify first point: ClickcMnuccab;TI1

- Specify next point or [Undo]: ClickcMnuccab;TI2

- Specify next point or [Undo]: ( paþc; Command )

1.2 KUrbnÞat;Rtg;mYyedayeRbIRbEvg 10000MM

rebóbeRbII :



- Command: L ( Line )


- Specify next point or [Undo]: 10000


1.3 KUrbnÞat;mYyedayeRbIRbEvg 10000MM nwgmuM 45

rebóbeRb I :

- Command: L ( Line )


- Specify next point or [Undo]: @ 10000<34

- Specify next point or [Undo]: ( paþc ; Command )

2. COMMAND ERASE



ERASE KWCa Command mYysMrab;lub Object .

2.1 reboblub OBJECT

rebóbeRbII :

- Command: E ( Erase )

- Select objects: Select Object

- Select objects: ( paþc; Command )

3. COMMAND CONSTRUCTION LINE

CONSTRUCTION LINE KWCabnÞat;mYyKµanRBMEdnkMNt; .

3.1 eRbIbnÞat; XLINE edayeRbICYrepþk

rebóbeRbII :



- Command: XL ( XLine )

- [Hor/Ver/Ang/Bisect/Offset]: H ( Horizontal )

- Specify through point: ClickcMnuccab;TI1



- Specify through point: ( paþc; Command )

3.2 eRbIbnÞat; XLINE edayeRbICYrbQÄr

rebóbeRbII : - Command: XL ( XLine )

- [Hor/Ver/Ang/Bisect/Offset]: V ( Vertical )







3.3 eRbIbnÞat; XLINE edayeRbImuM

rebóbeRbII : - Command: XL ( XLine )

- [Hor/Ver/Ang/Bisect/Offset]: A ( Angle )

- angle of xline (0.00) or [Reference]: 45 ( muM )







4. COMMAND COPY

COPY KWCa Command mYysMrab;cMlg Object.

4.1 COPY OBJECT edayeRbIBIrcMnuc

rebóbeRbII : - Command: CO ( Copy )


- Specify base point: Click cMnuccab;TI1

- Specify second point: Click cMnuccab;TI2

4.2 COPY OBJECT edayeRbIcMgay 10000MM

rebóbeRbII :



- Command: CO ( Copy )


- Specify base point: ClickcMnuccab;TI1

- Specify second point: 10000 ( R bEvg )

4.3 COPY OBJECT edayeRbICamYy MULTIPLE

rebóbeRbII : - Command: CO ( Copy )


- Specify base point: M ( Multiple )


- Specify second point: ClickcMnuccab;TI2




- Specify second point: ( paþc; Command )

5. COMMAND MULTILINE

MULTILINE KWCa Command mYysMrab;KUr)anCabnÞat;Dub .

5.1 rebóbeRbI MULTILINE

rebóbeRbII : - Command: ML ( Multiline )

- Specify [Justification/Scale/STyle]: S ( Scale )

- Enter mline scale <1.00>: 700 ( KMlat )

- Specify [Justification/Scale/Style]: ClickcMnuccab;TI1

- Specify next point: ClickcMnuccab;TI2






5.2 rebóbeRbI MULTILINE edayeRbIRbEvg 10000MM

rebóbeRbII : - Command: ML ( Multiline )

- Specify [Justification/Scale/STyle]: S ( Scale )

- Enter mline scale <1.00>: 700 ( KMlat )

- Specify [Justification/Scale/Style]: ClickcMnuccab;TI1

- Specify next point: 10000 ( RbEvg )




6. COMMAND MIRROR

MIRROR KWCa Command mYysMrab;qøúH Object.

6.1 rebóbeRb I MIRROR edayrkSa OBJECT edImeGayenAdEdl

rebóbeRbII :

- Command: MI ( Mirror )




- [Yes/No] <N>: N ( rkSa Object edIm )

6.2 rebóbeRbI MIRROR edayminrkSa OBJECT edIm



rebóbeRbII : - Command: MI ( Mirror )




- [Yes/No] <N>: Y ( minrkSa Object edIm )

7. COMMAND POLYLINE

POLYLINE KWCa Command mYysMrab;KUr Object )anCabnÞat;Rtg;mYy . ehIybnÞat; Polyline nI1²

Cab;KñaTaMgGs;.

7.1 rebóbKUrbnÞat; POLYLINE edayeRbI 4POINT



rebóbeRbII : - Command: PL ( Polyline )

- Specify start point: ClickcMnuccab;TI1

- [Arc/Halfwidth/Length/Undo/Width]: ClickcMnuccab;TI2



- [Arc/Close/Halfwidth/Length/Undo/Width]: ( paþc; Command )

7.2 rebóbKUrbnÞat ; POLYLINE edayeRbIRbEvg 10000MM





- [Arc/Halfwidth/Length/Undo/Width]: 10000 ( RbEvg )

- [Arc/Halfwidth/Length/Undo/Width]: ( paþc; Command )

7.3 rebóbKUrbnÞat ; POLYLINE edayeRbICamYy ARC


- Specify start point: ClickcMnuccab;TI1 - Specify next [Arc/Halfwidth/Length/Undo/Width]: A ( Arc )

- [Line/Radius/Second pt/Undo/Width]: S ( Second )

- Specify Second point on arc: Click cMnuccab;TI2

- Specify end point of arc : ClickcMnuccab;TI3



- [Angle/Line/Second/Undo/Width]: ClickcMnuccab;TI4

- [Angle/Line/Second/Undo/Width]: ( paþc; Command )

7.4 rebóbKUrbnÞat; POLYLINE edayeRbICamYy WIDTH



- Specify next point or [Arc/Halfwidth/Length/Undo/Width]: W ( Width )

- Specify starting width <0.00>: 700 ( kMras; )

- Specify ending width <700.00>: 700 ( kMras; )










- [Arc/Halfwidth/Length/Undo/Width]: ( paþc; Command )

8. COMMAND OFFSET

OFFSET KWCa Command mYysMrab; Offset bnÞat;BIkEnøgmYyeTAkEnøgmYyeTóteday)ankMNt;RbEvg

TukCamun .

8.1 rebóbeRbI OFFSET edaykMNt;RbEvg 700MM

rebóbeRbII :



- Command: O ( Offset )

- Specify offset distance or [Through] 700 ( tMél )

- Select object to offset or <exit>: ClickelIbnÞat;

- Specify point on side to offset: ClickcMnuccab;1

9. COMMAND POLYGONE

POLYGONE KWCa Command mYysMrab;KUr Object )anCaBhuekaNmYy .

9.1 rebóbeRbI POLYGONE CamYy INSCRIBED

rebóbeRbII : - Command: POL ( Polygone )



- Polygone Enter number of sides <4>: 7 ( cMnYn )

- Specify center of polygon or [Edge]: ClickcMnucTI1

- [Inscribed /Circumscribed] <I>: I ( Inscribed )

- Specify radius of circle: Click cMnucTI2

9.2 rebóbeRbI POLYGONE CamYy CICUMSCRIBED



- Specify center of polygon or [Edge]: ClickcMnuccab;TI1

- [Inscribed /Circumscribed] <I>: C ( Cicumscribed )

- Specify radius of circle: Click cMnuccab;TI2



9.3 rebóbeRbI POLYGONE edaykMNt;TMhM 7000MM



- Specify center of polygon or [Edge]: ClickcMnucTI1 - [Inscribed /Circumscribed] <I>: C ( Cicumscribed )

- Specify radius of circle: 7000 ( TMhM )

10. COMMAND ARRAY

ARRAY KWCa Command mYysMrab;kMNt; Object eGayrt;CaCYrtamGkS½EdleyIgcg;)an .

10.1 rebóbeRbI ARRAY CamYy RECTANGULAR

rebóbeRbII :



- Command: AR ( Array )

- Click elIBakü Rectangular Array

- Row ( 4 cMnYn Object rt;tamCYrepþk )

- Column ( 7 cMnYn Object rt;tamCYrbQÄr )

- Row Offset ( 7000 RbEvg Object rt;tamCYrepþk )

- Column Offset ( 7000 RbEvg Object rt;tamCYrbQÄr )

- Angle ( muMsUnü )

- Click elIBakü Select Object

- Select Object

- Ok



10.2 rebóbeRbI ARRAY CamYy POLAR ARRAY

rebóbeRbII : - AR ( Array )

- Click elIBakü Polar Array

- Total Number Of Items ( 12 cMnYn Object )

- Angle To Fit ( 360 muMvilCuMvijGkS½ )

- Click elIBakü Select Object - Select Object

- Click elI Icon Pick Center Point

- Click cMnuc1 - Ok



11. COMMAND RECTANGLE

RECTANGLE KWCa Command mYysMrab; Object )anCaragctuekaNEkg .

11.1 rebóbKUr RECTANGLE edayeRbI 2POINT

rebóbeRbII : - Command: REC ( Rectangle )

- [Chamfer/Elevation/Fillet/Thickness/Width]: Click cMnucTI1

- Specify other corner point or [Dimensions]: Click cMnucTI2

11.2 rebóbeRbI RECTANGLE edaykMNt;RbEvgbeNþay10000MM & RbEvgTTwg 7000mm

rebóbeRbII :



- Command: REC ( Rectangle )

- [Chamfer/Elevation/Fillet/Thickness/Width]: ClickcMnucTI1

- Specify other corner point or: @ 10000,7000

11.3 rebóbeRbI RECTANGLE CamYy CHAMFER


- [Chamfer/Elevation/Fillet/Thickness/Width]: C

- Specify first distance <0.00>: 700 ( tMél )

- Specify second distance <0.00>: 700 ( tMél )

- [Chamfer /Fillet/Thickness/Width]: ClickcMnucTI1

- Specify other corner [Dimensions]: @ 10000,7000

11.4 rebóbeRbI RECTANGLE CamYy FILLET




- [Chamfer/Elevation/Fillet/Thickness/Width]: F

- Specify first chamfer distance <0.00>: 700 ( tMél )

- [Chamfer/ Fillet/Thickness/Width]: ClickcMnucTI1

- Specify other corner [Dimensions]: @ 10000,7000

11.5 rebóbeRbI RECTANGLE CamYy WIDTH

rebóbeRbII : - Command: REC ( Rectangle)

- [Chamfer/Elevation/Fillet/Thickness/Width]: W

- Specify first chamfer distance <0.00>: 700 ( kMras; )



- [Chamfer/Elevation/Fillet/Thickness/Width]: ClickcMnucTI1 - Specify other corner [Dimensions]: @ 10000,7000

12. COMMAND MOVE

MOVE KWCa Command mYysMrab;pøas;bþÚrTItaMg Object .

12.1 rebób MOVE OBJECT

rebóbeRbII : - Command: M ( Move )


- Specify base point: ClickcMnucTI1

- Specify second point: ClickcMnucTI2



12.2 rebób MOVE OBJECT edaykMNt;RbEvg

rebóbeRbII : - Command: M ( Move )


- Specify base point: ClickcMnucTI1

- Specify second point: 10000 ( RbEvg )

13. COMMAND ARC

ARC KWCa Command mYysMrab;KUr Object )anCaGgát;FñÚmYy.

13.1 KUrGgát;FñÚmYyedayeRbI 3POINT

rebóbeRbII :



- Command: A ( Arc)

- Specify start point of arc or [Center]: Click cMnucTI1

- Specify second point [Center/End]: Click cMnucTI2

- Specify end point of arc: Click cMnucTI3

13.2 KUrGgát;FñÚmYyedayeRbI CENTER POINT & muMbgVil

rebóbeRbII : - Command: A ( Arc )

- Specify start point [Center]: C ( Center )

- Specify center point of arc: ClickcMnuccab;TI1

- Specify start point [Center]: ClickcMnuccab;TI2

- Specify end [Angle/chord Length]: A ( Angle )



- Specify included angle: 180 ( muM )

14. COMMAND : ROTATE ROTATE KWCa CommandmYysMrab;bgVil Object.

14.1 rebóbeRbI ROTATE edaykMNt;muM 90

rebóbeRbII : - Command: RO ( Rotate )



- Specify rotation angle or [Reference]: 90 ( mMu )



15. COMMAND : CIRCLE

CIRCLE KWCa Command mYysMrab;KUr)anCargVg;mYy .

15.1 KUrrgVg;mYyedayepþImBIp¢it

rebóbeRbII : - Command: C ( Circle )

- Circle Specify [3P/2P/Ttr]: Click cMnuccab;TI1

- Specify radius of circle or [Diameter]: Click cMnuccab;TI2

15.2 KUrrgVg;mYyedayeRbIkaM

rebóbeRbII :



- Command: C ( Circle )

- Circle Specify [3P/2P/Ttr]: ClickcMnuccab;TI1

- Specify radius of circle or [Diameter]: 7000 ( RbEvgkaM )

16. COMMAND : SCALE

SCALE KWCa Command mYysMrab;BRgIkrWbRgYm Object.

16.1 BRgIk OBJECT eGayFMCagBIrdg

rebóbeRbII : - Command: SC ( Scale )


- Specify base point: ClickcMnuccab;1

- Specify scale factor or [Reference]: 2 ( FMCagBIrdg )



16.2 BRgIk OBJECT edayeRbI REFERENCE

rebóbeRbII :

- Command: SC ( Scale )


- Specify base point: Click cMnuccab;1

- Specify scale factor or [Reference]: R ( Reference )

- Specify reference length <1>:10000 ( tMéledIm Object )

- Specify new length: 25000 ( tMélBit Object )

17. COMMAND : S PLINE

SPLINE KWCa Command mYysMrab;KUr)anCaragExSekag .



17.1 rebóbKUrbnÞat; SPLINE edayeRbI 6POINT

rebóbeRbII : - Command: SPL ( Spline )

- Specify first point or [Object]: ClickcMnuccabTI;1

- Specify next point:Click cMnuccab;TI;2

- Specify next point [Close/Fit tolerance]: ClickcMnuccab;TI;3




17.2 rebóbKUrbnÞat; SPLINE edayeRbICabnÞat;biTCit ( CLOSE )



rebóbeRbII : - Command: SPL ( Spline )

- Specify first point or [Object]: ClickcMnuccabTI;1

- Specify next point: ClickcMnuccab;TI;2





- Specify next point [Close/Fit tolerance]: C ( Close )

18. COMMAND : STRETCH



STRETCH KWCa Command mYysMrab;Taj rUbPaBtamcitþcg; rW tamRbEvgEdl)ankMNt; .

18.1 rebóbTajrUbPaBedayeRbIBIrcMnuc

rebóbeRbII : - Command: S ( Stretch )

- Select Object: Select Object

- Specify base point displacement: Click cMnuccab;TI;1

- Specify second point displacement: ClickcMnuccab;TI2

18.2 rebóbTajrUbPaBedaykMNt;RbEvg

rebóbeRbII :



- Command: S ( Stretch )

- Select Object: Select Object

- Specify base point displacement: Click cMnuccab;TI;1

- Specify second point of displacement or: 9000

19. COMMAND : PEDIT

PEDIT KWCa Command mYysMrab;EkbnÞat; Line

eGayeTACabnÞat; PolyLine. ehIynigGacEkbnÞat; Line nig

PolyLine eGaymankMras;.

19.1 EkbnÞat; LINE eGayeTACabnÞat; POLYLINE ( JION )

rebóbeRbII :

- Command: PE ( Pedit )

- Pedit Select polyline or [Multiple]: Click elIbnÞat;



- Do you want to turn it into one? <Y> Y ( Yes )

- [Join/Width/Edit /Fit/Spline/Decurve/Ltype]: J ( Join )


- [Join/Width/Edit/Fit/Spline/Decurve/Ltype]: ( pþac; Command )

19.2 EkbnÞat; POLYLINE & LINE eGaymankMras; ( WIDTH )

rebóbeRbII : - Command: PE ( Pedit )

- Pedit Select polyline or [Multiple]:Click elIbnÞat ;

- Do you want to turn it into one? <Y> : Y ( Yes )

- [Join/Width/Edit /Fit/Spline/Decurve/Ltype]: W ( Width )

- Specify new width for all segments: 400 ( kMras; )

- [Join/Width/Edit/Fit/Spline/Decurve/Ltype]: ( pþac; Command )



19.3 EkbnÞat ; POLYLINE eGayeGayeTACaExSekag ( FIT )

rebóbeRbII : - Command: PE ( Pedit )

- Pedit Select polyline or [Multiple]: ClickelIbnÞat;

- Do you want to turn it into one? <Y> : Y

- [Join/Width/Edit/Fit/Spline/Decurve/Ltype]: F ( Fit )

- [Join/Width/Edit/Fit/Spline/Decurve/Ltype]:

20. COMMAND : ELLIPSE

ELLIPSE KWCa Command mYyeRbIsMrab;KUr Object mYy)anCaragBgRkeBI.

20.1 KUr ELLIPSE edayeRbI 3POINT

rebóbeRbII :



- Command: EL ( Ellipse )

- Specify endpoint of ellipse or [Arc/Center]:ClickcMnuccab;TI1

- Specify other endpoint of axis: ClickcMnuccab;TI2

- Specify distance to other or [Rotation]: ClickcMnuccab;TI3

20.2 KUr ELLIPSE edayeRbIkaM R = 10000MM

rebóbeRbII : - Command: EL ( Ellipse )

- Specify endpoint of ellipse [Arc/Center]: ClickcMnuccab;TI1

- Specify distance to other or [Rotation]: ClickcMnuccab;TI2

- Specify distance to other or [Rotation]: 10000 ( RbEvgkaM )



21. COMMAND : LENGTHEN

LENGTHEN KWCa Command mYysMrab;bnøayrWbRgYmbnÞat;.

21.1 rebóbeRbI LENGTHEN CamYy DELTA

rebóbeRbII : - Command: LEN ( Lengthen )

- [DElta/Percent/Total/DYnamic]: De ( Delta )

- delta length [Angle] <0.00>: 7000 ( RbEvgbnøaybnÞat; )

- Select an object to change or [Undo]: ClickelIbnÞat;

- Select an object to change or [Undo]: ( pþac; Command )

22. COMMAND : OSNAP



OSNAP KWCa Command mYysMrab;kMNt;cMnuccab;eRkayBIeKehA Command NamYymkeRbI . ehIycMnuccab;

nI1²mansBaØaxus²Kña .

kMnt;sMKal; : * Endpoint cab;cugrbs;bnÞat ;

* Node cab;cMnucrbs; Point

* Insertion cab;cMnucRCugRbsBV * Nearest cab;cMnucCitbMput

* Quick cab;cMnucepSg²

* Perpendicular cab;cMnucEkg

* Midpoint cab;cMnuckNþalrbs;bnÞat;

* Targent cab;cMnucb:HrgVg;

* Intersection cab;cMnucRbsBV



* APParent Intersection cab;cMnuckat;Kña

* Center cab;cMnucp©uitrbs;rgVg;

* Quadrant cab;cMnuckaRdg;rbs;rgVg ;

22.1 karbg ðajcMnuccab;epSg² ( OSNAP )

rebóbeRbII : - Command: OS ( Osnap )

- Ecjtaragmk

- Click elIBakü Select All

- OK

23. COMMAND : ZOOM



ZOOM KWCa CommandmYysMrab;BRgIkrWbRgYmrUbeRbob)andUcCaEkvyItTajrUbBRgIkrWbRgYmrUbEdr.

23.1 bRgYmrUbTaMgGs;eGaysßitenAelI SCREEN EtmYy ( ZOOM ALL )

rebóbeRbII : - Command: Z ( Zoom )

- [All/Center/Dynamic/Extents/Previous/Scale/Window] <real time>: A ( All )

23.2 bRgIkrUbTaMgGs;eGayeBj SCREEN( ZOOM EXTEND )


- [All/Center/Dynamic/Extents/Previous/Scale/Window] <real time>: E ( Extend )



23.3 RtLb;eRkaymYyCMh‘aneBleRbI ZOOM ( ZOOM PREVIOUS )


- [All/Center/Dynamic/Extents/Previous/Scale/Window] <real time>: P ( Previous )

23.4 karbg ðajrUbedayeRbIemKuN ( SCALE )


- [All/Center/Dynamic/Extents/Previous/Scale/Window] <real time>: S ( Scale )

- Enter a scale factor (nX or nXP): 2xp (BRgIkrUbFMCagBIrdg )

23.5 karbg ðaj OBJECT enAkñúg ( WINDOW )




- [All/Center/Dynamic/Extents/Previous/Scale/Window] <real time>: Select Object

23.6 karBRgIkrWbRgYmrUbpÞal;enAelI SCREEN ( ZOOM REALTIME )


- [All/Center/Dynamic/Extents/Previous/Scale/Window] <real time>: rYccab;epþImBRgIkrWbRgYmrUbcuHeLIg²

- Enter to exit, or right-click to display : ( pþac; Command )

23.7 karTajrUbcuHeLIgedayeRbI PAN REALTIME



rebóbeRbII :

- Command: P ( Pan )

- Enter to exit, or right-click to display : rYccab;TajrUbcuHeLIg²

- Enter to exit, or right-click to display : ( pþac; Command )

24. COMMAND : EXTEND

EXTEND KWCa Command mYysMrab;bnøaybnÞat;mYyeGayeTAb:HnigbnÞat;mYyeTót . ehIyeyIgRtUv

kMNt;bnÞat;mYyTukCamunsin.

24.1 rebób Extend bnÞat;mYyeGayeTAb:HbnÞat;mYy ( 2Point )

rebóbeRbII :



- Command: EX ( Extend )

- Select objects: Click ObjectTI1

- Select object [Project/Edge/Undo]: Click ObjectTI2

- Select [Project/Edge/Undo]: ( pþac; Command )

24.2 rebób Extend bnÞat;mþgeGayeTATaMgGs; ( Fence )

rebóbeRbII : - Command: EX ( Extend )

- Select objects: Click Object TImYy

- Select object [Project/Edge/Undo]: F ( Fence )

- First fence point: Click cMnucTImYy

- Specify endpoint of line or [Undo]: Click cMnucTIBIr

- Select object [Project/Edge/Undo]: ( pþac; Command )



25. COMMAND : TRIM

TRIM KWCa CommandmYysMrab;kat; Object .

25.1 rebób Trim bnÞat;mþgmYy² ( Single Trim )

rebóbeRbII : - Command: TR ( Trim )

- Select objects: Click Object TI1

- Select object [Project/Edge/Undo]: Click Object TI2


25.2 rebób TRIM bnÞat;mþgeGaydac;TaMgGs; ( FENCE )



rebóbeRbII :

- Command: TR ( Trim )

- Select objects: Click Object TImYy

- Select object to [Project/Edge/Undo]: F ( Fence )

- First fence point: Click cMnucTI1

- Specify endpoint of line or [Undo]: Click cMnucTI2


26. COMMAND : DDPTYPE

DDPTYPE KWCa Command mYysMrab;kMNt;TMrg;rbs; Point .

26.1 karbg ðajtarag ( POINT STYLE )



rebóbeRbII : - DDPTYPE ( Point Style )

- Click elI Point mYyNaEdlcg;)an

- kEnøg Point Size sMrab;eRCIserIsykTMhM

- OK

27. COMMAND : POINT

POINT KWCa Command mYysMrab;KUr)anCacMnuc² . ehIymunnigeyIgGacEck Point )anluHRtaEteyIg)an

begáIt Poin Style Camunsin .

27.1 karbg ðaj ( POINT ) CacMnuc²

rebóbeRbII :



- Command: PO ( Point )

- Specify a point: ClickcMnuccab;1

28. COMMAND : MAKE BLOCK

MAKE BLOCK KWCa Command mYysMrab; Save Epñk

mYyénrUbTukkñúg Memory .

28.1 karbg ðajBIrebób ( BLOCK OBJECT )

rebóbeRbII : - Command: B ( Block )

- kEnøg Name eGayeQµaHsMKal; ( Table )



- Specify insertion base point: Click elIBakü Pick Point

- Specify insertion base point: Click cMnuccab;1

- Specify insertion base point: Click elIBakü Select Object


- Select objects: Ok

29. COMMAND : INSERT BLOCK

INSERT BLOCK KWCa Command mYysMrab;ehAmkvijenA Block EdleyIg)anbegáItTukBImun .

rWk¾ Block EdlmanRsab;enAkñúg Programe Auto Cad .

29.1 rebóbehA ( OBJECT BLOCK )

rebóbeRbII : - Command: I ( Insert )



- kEnøg Name eRCIserIseQµaHsMKal;mkvij ( Table ) - Ok - [Scale/X/Y/Z/Rotate/PScale/ PRotate]: S ( Scale )

- Specify scale factor XYZ axes: 7 ( TMhMFMCag 7dg )

- Specify insertion point: Click cMnuccab;1

30. COMMAND : DIVIDE

DIVIDE KWCa Command mYysMrab;edARbeLaH rWEckcMnucenAelI Object. ehIyRbeLaH Object nI1²b:unKñaTaMg

Gs;munnigeyIgGacEck Divide )anluHRtaEteyIg)anbegáIt Point StyleCamunsin .

30.1 karbg ðajBIrebób DIVIDE edayedACa7cMnuc

rebóbeRbII :

- Command: DIV ( Divide )



- Select object to divide: Click elIbnÞat;

- Enter the number of segments or [Block]: 9 ( cMnYn )

30.2 karbg ðajBIrebób DIVIDE CamYynwg ( BLOCK )

rebóbeRbII : - Command: DIV ( Divide )

- Select object to divide: ClickelIbnÞat; - Enter the number of segments or [Block]: B ( Block )

- Enter name of block to insert: év:eQµaH Block mkvij

- Align block with object? [Yes/No] <Y>: Y ( Yes )

- Enter the number of segments: 7 ( RbeLaH )

31. COMMAND : MEASURE



MEASURE KWCa CommandmYyRsedógnåg DivideEdr. b:uEnþRbEvgbnÞat;xageRkayKwxøICagRbEvgbnÞat;xagmux

ehIymunnigeyIgGacEck Measure )anluHRtaEteyIg)anbegáIt Poin Style Camunsin .

31.1 karbgðajBIrebób Measure edayedACacMnuc²

rebóbeRbII : - Command: ME ( Measure )

- Select object to measure: ClickelIbnÞat;

- Specify length of segment or [Block]: ClickcMnuccab;TI1


31.2 karbg ðajBIrebób MEASURE CamYynig ( BLOCK )



rebóbeRbII : - Command: ME ( Measure )

- Select object to measure: Click elIbnÞat;

- Specify length of segment or [Block]: B ( Block )

- Enter name of block to insert: év:eQµaH Block mkvij

- Align block with object? [Yes/No] <Y>: Y ( Yes )

- Specify length of segment: Click cMnucTI1

- Specify second point: Click cMnucTI2

32. COMMAND : BREAK

BREAK KWCa Command mYysMrab;bMEbk Object ecjCaBIrEpñk . Object EdlbMEbk)anmandUcCa Line,

Polyline, Arc , Circle ........ . l.



32.1 bMEbkbnÞat;eGayecjCaBIrEpñk

rebóbeRbII : - Command: BR ( Break )

- Break Select object: Select Object

- Specify second break point [First point]: ClickcMnuccab;1

32.2 bMEbkbnÞat;edayeRbI ( 2POINT )

rebóbeRbII : - Command: BR ( Break )

- Break Select object: Select Object

- Specify second break point or [First point]: F ( First )

- Specify first break point: ClickcMnuccab;TI1



- Specify second break point: ClickcMnuccab;TI2

33. COMMAND : BOUNDARY HATCH

Boundary Hatch KWCa Command mYysMrab;bBa©ÚlRkLakar:UcUleTAkñúg Object . ehIyeKGacbBa©ÚlRkLakar:U

)anluHRtaEt Object enaHCaépÞbiTCit .

kMNt;sMKal;³

* Pattern sMrab;eRCIserIsm:UdRkLakarU:

* Angle sMrab;eRCIserIsykmuM

* Scale sMrab;eRCIserIsykTMhM

* Preview sMrab ; Preview emIl

* Pick Point sMrab;eRCIserIsykcMnucNamYyCaeKal



* Select Object sMrab;eRCIserIsyk Select Object

* Inherit Properties sMrab;cMlg Hatch BImYyeTAmYy

* Associative sMrab ; Move bnÞat;eGay Hatch rt;tam

* Nonassociative sMrab; Move bnÞat;mineGay Hatch rt;tam

33.1 rebóbbegáIt HATCH

rebóbeRbII : - H ( Hatch )

- ecjtaragmk

- Click kEnøg Patten

- Click elIMBakü Orther Predefined

- eRCIserIsm:UdRkLakarU:



- OK

- kEnøg Angle eRCIserIsykm uM 45

- kEnøg Scale eRCIserIsykTMhM 100

- rYc Click elIBakü Pick Point

- ClickcMnuccab;1

- OK

34. COMMAND : FILLET

FILLET KWCa CommandmYysMrab;eFVIRCugeGaymUl.

34.1 Fillet edayeGay R=0

rebóbeRbII :



- Command: F ( Fillet )

- Select first [Polyline/Radius/Trim]: R ( Radius )

- Specify fillet radius <17.00>: 0 ( tMélsUnü )

- Select first [Polyline/Radius/Trim]: ClickbnÞat;TI1

- Select second object: ClickbnÞat;TI2

34.2 Fillet edayeGay R=1000

rebóbeRbII : - Command: F ( Fillet )


- Specify fillet radius <17.00>: 1000 ( tMél )

- Select first [Polyline/Radius/Trim]: Click cMnucTI1

- Select second object: Click cMnucTI2



34.3 Fillet mþgeGayRCugmUlTaMgGs; ( Polyline )

rebóbeRbII : - Command: F ( Fillet )


- Specify fillet radius <17.00>: 1000 ( tMél ) - Select first [Polyline/Radius/Trim]: P ( Polyline )

- Select 2D Polyline: Click elIbnÞat;

35. COMMAND : CHAMFER

CHAMFER KWCa Command mYysMrab;RcIbRCug.

35.1 Chamfer edayeGay R=0



rebóbeRbII : - Command: CHA ( Chamfer )

- Select first [Polyline/Distance/ Trim]: D ( Distance )

- Chamfer distance <0.50>: 0 ( tMélsUnü )

- Specify second chamfer distance <0.00>: 0 ( tMélsUnü )

- Select first [Polyline/Distance/ Trim]: Click bnÞat;TI1

- Select second line: Click bnÞat;TI2

35.2 Chamfer edayeGay R=1000

rebóbeRbII : - Command: Cha ( Chamfer )

- Select first [Polyline/Distance/ /Trim/]: D ( Distance )



- Chamfer distance <0.50>: 1000 ( tMél )

- Specify second chamfer <0.00>: 1000 ( tMél )

- Select first [Polyline/Distance/ /Trim/]: ClickbnÞat;cab;TI1

- Select second line: ClickbnÞat;cab;TI2

35.3 Chamfer edayeGayRcIbRCugTaMgGs; ( POLYLINE )

rebóbeRbII : - Command: Cha ( Chamfer )

- Select first [Polyline/Distance/ Trim]: D ( Distance )

- Chamfer distance <0.50>: 1000 ( tMél )

- Specify second chamfer <0.00>: 1000 ( tMél ) - Select first [Polyline/Distance /Trim]: P ( Polyline )



- Select 2D Polyline: Click elIbnÞat;

36. COMMAND : DONUT

DONUT KWCa Command mYyeRbIsMrab;KUr Object Edlmanragmuxkat;CasresrmUl.

36.1 rebóbeRbI Donut edayeGaybnÞat;p©itxagkñúg = 0 (Diameter = 0 )

rebóbeRbII :

- Command: DO ( Donut )

- Specify inside diameter of donut <0.50>: 0 ( tMélGgát;;p©itxagkñúg )

- Specify outside diameter of donut <1.00>: 900 ( tMélGgát;p©itxageRkA )

- Specify center of donut or <exit>: ClickcMnuccab;TI1






36.2 rebóbeRbI Donut edayeGaybnÞat;p©itxagkñúg = 100 (Diameter = 700 )

rebóbeRbII : - Command: Do ( Donut )

- Specify inside diameter of donut <0.00>: 100 ( tMélRbEvgGgát;p©itxagkñúg )

- Specify outside diameter of donut <900.00>: 700 ( tMélRbEvgGgát;p©itxageRkA )


- Specify center of donut or <exit>: ClickcMnuccabTI2





37. COMMAND : RAY

RAY KWCa Command mYyRsedognWg Xline EdrEtxusKñaRtg; Ray manRBMEdnBak;kNþal.

37.1 KUrbnÞat; Ray mYyedayeRbIBIrcMnuc ( 2Point )

rebóbeRbII : - Command: Ray







38. COMMAND BOUNDARY

BOUNDARY KWCa Command mYysMrab;kMNt;RkLaépÞmYyEdleyIgcg;)ansMrab;begáIt)anCamaDén Object.

38.1 rebobbegáIt BOUNDARY

rebóbeRbII : - Command: BO ( Boundary )

- Select internal point: Click elIBakü Pick Point

- BOUNDARY created 1 polyline: ClickcMnuccab;1

39. COMMAND EXPLODE



EXPLODE KWCa Command mYysMrab;bMEbk Object eGayeTACa Segment tUc² . Object

EdlbMEbk)an mandYcCa: 3D Solid, Block, Region, 2D Polyline, Width Polyline 3D Polyline .

39.1 rebóbeRbI EXPLODE

rebóbeRbII : - Command: X ( Xplode )


40. COMMAND : UNIT

UNIT KWCa Command mYysMrab;kMNt;xñatkñúgkarKUr .

40.1 kMNt;xñatedayKitCa DECIMAL

rebóbeRbII :



- Command: UN

- kEnøg Length rUceRCIserIsBakü Decimal

- kEnøg Precision ( eRCIserIselx 0 )

- kEnøg Angle rUceRCIserIsBakü Decimal Degrees

- kEnøg Precision ( eRCIserIselx 0.00 )

- kEnøg Insertion Scale Milimeter

- OK

41. COMMAND : LAYER

LAYER KWCa Command mYysMrab;begáIteQµaH BN’ kMras; nigbnÞat;dac;².

kMNt;sMKal;³

* On : sMrab;biT rWebIk Object



* Lock : sMrab;cak;esa rWebIkesa Object

* Color : sMrab;eGayBN’ Object

* Linetype : sMrab;bþÚr Object eGayeTACabnÞat;dac;²

* Lineweight: sMrab;bþÚrkMras;bnÞat;

41.1 rebóbbegáIt LAYER :

rebóbeRbII : - Command: LA ( Layer )

- ecjtaragmk Click elIBakü New

- eGayeQµaHsMKal ; ( Wall )

- rYceRCIserIsBN’ nigkMras; Color & Lineweight

- rYccucelIBakü Current

- OK



41.2 rebóbbegáItbnÞat;dac;² LINEWEIGHT

rebóbeRbII :

- Command: LA ( Layer )

- ecjtaragmk Click elIBakS New

- eGayeQµaHsMKal; ( Linetype )

- rYceRCIserIsBN’ nigkMras; Color & Lineweight

- bnÞab;mk Click elIBakü Continuous

- rYc Click elIBakü Hidden2

- OK

- bnÞab;mkeTot Click elIBakü Current - Ok

42. COMMAND :DDCOLOR



DDCOLOR KWCa CommandmYys Mrab;dUrBN’bnÞat; ( Object ) .

42.1 bþÚrbnÞat;BN¾ébtgeTACaBN¾Rkhm

rebóbeRbII : - Command: COLOR

- ecjtaragmk

- rYceRCIserIsBN’mYyNaEdlcg;)an - Color : OK

43. COMMAND : MATCH PROP

MATCH PROPERTIES KWCa Command mYysMrab;cMlgBN¾cMlg Hatch nigvt§úepSg² eTAeGay

Object.



43.1 rebóbþÚrBN¾bnÞat;

rebóbeRbII : - Command: MA ( Match Properties )

- Select source object: Select bnÞat;TI1 - Select destination object(s) or [Settings]: Select bnÞat;TI2

43.2 rebóbþÚr HATCH BImYyeTAmYy

rebóbeRbII : - Command: MA ( Match Properties ) - Select source object: Click elI Hatch TI1

- Select destination [Settings]: Click elI Hatch TI2



44. COMMAND : DIST

DIST KWCa Command mYysMrab;vas;rkRbEvg Object .

44.1 rebóbeRbI DIST

rebóbeRbII : - Command: DI ( Dist )

- DIST Specify first point: Click cMnuccab;TI1

- Specify second point: Click cMnuccab;TI2

45. COMMAND : AREA

AREA KWCa Command mYysMrab;KitrkRkLaépÞ nigbrimaNrbs; Object.



45.1 rkRkLaépÞeday CLICK CacMnuc²

rebóbeRbII : - Command: AA ( Area ) - first corner point or [Object/Add/Subtract]: Click cMnuccab;TI1

- next corner point ENTER for total: Click cMnuccab;TI2



- Specify next ENTER for total: ClickcMnuccab;TI5

45.2 rkRkLaépÞedayeRbI OBJECT

rebóbeRbII :



- Command: AA ( Area ) - S. first corner point or [Object/Add/Subtract]: O ( Object ) - rYc Click elI Object

46. COMMAND LIST

LIST KWCa Command mYysMrab;rklkçN³KitrkRkLaépÞ nigbrimaNrbs; Object .

46.1 rebóbeRbI LIST

rebóbeRbII : - Command: LI ( List ) - Select objects: Select Object

47. COMMAND TEXT STYLE



TEXT STYLE KWCa Command mYysMrab;begáItmU:dGkSr nigTMhMGkSr .

kMNt;cMNaM

* Style Name : eQµaHEdl)anbegáItrt;cUleTAkñúg Style Name * New : sMrab;begáIteQµaHsMKal;

* Rename : sMrab;EkeQµaH * Delete : sMrab;lubeQµaH

* Font Name : sMrab;erIsmU:dGkSr * Font Style : sMrab;erIs Style GkSr

* Height : sMrab;erIskMBs;GkSr

* Upside Down : sMrab;eGayGkSrepþkcuHeRkam

* Backwards : sMrab;eGayGkSrbRBa©as;Tis

* Width Factor : sMrab;eGaykMras;GkSr

* Oblique Angle : sMrab;eGayGkSrepþk

47.1 rebóbeRbI TEXT STYLE



rebóbeRbII : - Command: ST ( Text Style )

- kEnøg Font Name ( erIsmU:dGkSr )

- kEnøg Heigth ( eGaykMBs;GkSr )

- Click elIBakü New

- kEnøg Style Name ( eGayeQµaHsMKal; ) - Ok

- Close

48. COMMAND MULTILINE TEXT

MULTILINE TEXT KWCa Command mYysMrab;sresrGkSr .

48.1 rebóbsresr TEXT



rebóbeRbII : - Command: MT ( Multiline Text )

- Specify first corner: Click 1

- Specify opposite corner: Click 2

- rYccab;epþImsresrGkSr - Ok

49. COMMAND DTEXT

DTEXT KWCa Command mYysMrab;sresrGkSrEdlmancMNgeCIgEvg .

49.1 rebóbsresr TEXT

rebóbeRbII :



- Command: DT ( Dtext )

- Specify start point of text or [Justify/Style]: ClickcMnuc1

- Specify height <700.00>: 700 ( kMBs;GkSr )

- Specify rotation angle of text <180.00>: 0 ( muMsUnü )

- rYccab;epþImsresrGkSr

50. COMMAND EDIT TEXT

EDIT TEXT KWCa Command mYysMrab;EkGkSr .

50.1 rebóbEk TEXT

rebóbeRbII : - Command: ED ( Dtext )



- Select an object or ( Undo ): Click elIGkSr

- rYccab;epþImEkGkSr - Ok

51. COMMAND QTEXT

QTEXT KWCa Command mYysMrab;biTrwebIkGkSreGayecjCas‘um.

51.1 rebóbbiTGkSr

rebóbeRbII : - Command: QTEXT

- Enter mode [ON/OFF] <OFF>: ON ( biTGkSr ) - Command: Re ( Regen)



51.2 rebóbebIkGkSr

rebóbeRbII : - Command: QTEXT

- Enter mode [ON/OFF] <OFF>: OFF ( ebIkGkSr ) - Command: Re ( Regen)

52. COMMAND VIEWRES

VIEWRES KWCa Command mYysMrab;eFVIeGay Object ekagmanragmUl .

52.1 rebóbbiTGkSr

rebóbeRbII :



- Command: VIEWRES

- Do you want fast zooms? [Yes/No] <Y>: Y ( Yes )

- Enter circle zoom percent <10000>: 17000 ( tMélelx )

53. COMMAND : NEW

NEW KWCa Command mYysMrab;begáItTMB½rRkdas; .

53.1 rebóbbegáIt ( NEW )

rebóbeRbII :

- Click elIBakü File

- eRCIserIsBakü New

54. COMMAND : SAVE



SAVE KWCa Command mYysMrab;rkSa Object EdleyIg)anKUrTukkñúg Memory .

54.1 rebóbeRbI SAVE

rebóbeRbII : - Click elIBakü File

- eRCIserIsBakü Save as

- rYckEnøg File Name eGayeQµaHsMKal; House

- rYc Click elIBakü Save

55. COMMAND : OPEN

OPEN KWCa Command mYysMrab;eRCIserIsyk File EdleyIg)an Save TukBImunykmkeRbI.



55.1 rebób OPEN

rebóbeRbII : - Click elIBakü File

- eRCIserIsBakü Open

- rYc Click elI File EdleyIgcg;)an

- bnÞab;mk Click elIBakü Open

56. COMMAND : COPYCLIP

COPYCLIP KWCa Command mYysMrab; Copy Object Edl)an Select cUleTAkñúg Memory fµImYyeTót.

)ann½yfa Copy Object BITMB½rRkdas;mYyeTATMB½rRkdas;mYyeTót .

56.1 rebóbeRbI COPYCLIP



rebóbeRbII : - Select elI Object - Ctrl + C ( Copy )

57. COMMAND : PASTECLIP PASTECLIP KWCa Command mYysMrab;bBa©Úl Clip EdleyIg)anmkBIkareRbI CopyClip dak;eTAelI Screen.

57.1 rebóbeRbI PASTECLIP

rebóbeRbII : - Ctrl + V ( Paste )

- Click cMnuccab;mYy



58. COMMAND : CUTCLIP

CUTCLIP KWCa Command mYysMrab;kat; Object Edl)an Select rYccUleTAkñúg Clipboard .

58.1 rebóbeRbI CUTCLIP

rebóbeRbII : - Select elI Object - Ctrl + X ( CutClip )

59. COMMAND : CHANGE

CHANGE KWCa Command mYysMrab;dUrTisedArbs;bnÞat;

nigdUrTMhMrbs;rgVg; .



59.1 rebóbbþÚrTisedA nigRbEvgbnÞat;

rebóbeRbII : - Command: - CH

- Select objects: Click elIbnÞat;

- Specify change point or [Properties]: Click cMnucTI1

59.2 rebóbbþÚrTMhMrgVg;

rebóbeRbII :

- Command: - CH

- Select objects: Click elIrgVg;

- Specify change point or [Properties]: Click cMnucTI1



60. COMMAND : ID

ID KWCa Command mYysMrab;rk Coordinate rbs;cMnucmYyenAelI Screen .

60.1 rebóbrk COORDINATE

rebóbeRbII :

- Command: ID

- Specify point: ClickcMnucTI1

61. COMMAND : AUDIT

AUDIT KWCa Command mYysMrab;RtYtBinitü File EdleyIgkMBugKUretIman Error rwGt; .

61.1 rebóbRtYtBinitü FILE



rebóbeRbII : - Command: AUDIT

- errors detected? [Yes/No] <N>: Y ( Yes )

62. COMMAND : RECOVER

RECOVER KWCa Command mYysMrab;CYsCul File EdlebIkminrYc.

62.1 rebóbeRbI RECOVER

rebóbeRbII : - Command: RECOVER

- rYceRCIserIs File Edl Error

- rYc Clik elIBakü Open



63. COMMAND : PURGE

PURGE KWCa Command mYysMrab; Purge rbs;Edlmin)an

kare)aHecal.

63.1 rebóbeRbI PURGE

rebóbeRbII : - Command: PU ( Purge )

- Clik elIBakü Purge All

- Clik elIBakü Yes To All

64. COMMAND : RENAME



RENAME sMrab;bþÚrbnÞat;rbs; Block, Dimionsion, Layer, Ltype, Style, Ucs, View nig Viewport.

64.1 rebóbEkeQµaH LAYER

rebóbeRbII : - Command: RENAME

- Clik elIBakü Layer

- Clik elIeQµaHEdlcg;Ek

- kEnøg Rename To eGayeQµaHfµI

- Ok

65. COMMAND : DIMIONSION STYLE



DIMIONSION STYLE KWCa Command mYysMrab;begáItmU:dk,alRBYj Object Edl)an Select

rYccUleTAkñúg Clipboard .

kMNt;sMKal; : I- LINE AND ARROWS ( sMrab;erIsykm:Ud nig TMhMk,alRBYj )

* Dimoinsion Lines

- Color: ( sMrab;bþÚrBN¾bnÞat;epþk )

- Lineweigth: ( sMrab;bþÚrkMras;bnÞat;epþk )

- Exten Beyond Ticks: ( sMrab;kMNt;RbEvgbnÞat;epþk )

- Dim Line1: ( sMrab;dk nigdak;bnÞat;epþkxageqVg )

- Dim Line2: ( sMrab;dk nigdak;bnÞat;epþkxagsþaM )



* Extension Lines

- Color: ( sMrab;bþÚrBN¾bnÞat;bQÄr )

- Lineweigth: ( sMrab;bþÚrkMras;bnÞat;bQÄr )

- Offset From Origin: ( KMlat Object eTAbnÞat; )

- Ext Line1: ( sMrab;dk nigdak;bnÞat;bQÄrxageqVg )

- Ext Line2: ( sMrab;dk nigdak;bnÞat;bQÄrxagsþaM )

* Arrowheads

- 1st: ( sMrab;eRCIserIsm:Udk,alRBYj )

- 2st: ( sMrab;eRCIserIsm:Udk,alRBYj )

- Leader: ( sMrab;eRCIserIsm:Udk,alRBYj )

- Arrowsize: ( sMrab;eRCIserIsTMhMk,alRBYj )



* Center For Circle

- Type: ( sBaasMKal;rbs; Arroheads )

- Size: ( TMhMsBaØasMKal;rbs; Arroheads )

II- TEXT ( sMrab;erIsykm:UdGkSr TMhMGkSr nig BN½GkSr )

* Text Appearance

- Text Style: ( sMrab;eRCIserIsykm:UdGkSrEdl)anbegáIt )

- Text Color: ( sMrab;eRCIserIsBN¾GkSr )

- Text Height: ( sMrab;eRCIserIsykTMhMGkSr )

- Draw Frame Around Text: ( eGays‘umBT§½CuMvijGkSr )

* Text Placement



- Vertical: ( sMrab;eGayGkSrrt;cMkNþal rW xagelIExSbnÞat ; )

- Horizontal: (sMrab;eGayGkSrrt;eTAxageqVg rW xagsþaMExSbnÞat;)

- Offset From Dim Line: ( KMlatBIGkSreTAExSbnÞat; )

* Text Alignment

- Horizontal: ( eGayGkSrrt;tamCYrExSbnÞat;epþk )

- Aligned with dimionsion line: ( eGayGkSrrt;tamCYrExSbnÞat;epþk nig bQÄr )

- ISO Standard: (eGayGkSrrt;tamCYrExSbnÞat;epþk nig bQÄredaysVy½Rbvtþi )

III- FIT ( sMrab;kMNt; SCALE )

* Scale For Dimension Features



- Use overall scale of: ( sMrab;kMNt; scale )

IIII- Primary Units ( sMrab;kMNt;elxenAxageRkayek,ós )

* Linear Dimensions

- Unit Format: ( sMrab;eRCIserIsykxñatEdlKitCaEm:Rt rW CaGIun )

- Precision: ( sMrab;kMNt;ykelxxageRkaymanek,Ós rW Kµanek,Ós)

- Prefix: ( sMrab;eGayGkSrenAxagmuxelx )

- Surffix: (sMrab;eGayelxenAxageRkayGkSr)

* Measurement Scale

- Scale Factor: ( xñatdak;Caktþa )



* Angular Dimensions

- Units Format: ( sMrab;eRCIserIsykxñatEdlKitCaEm:Rt CaGIun rW Caradüg; )

- Precision: ( sMrab;kMNt;ykelxxageRkaymanek,Ós rW Kµanek,ós )

65.1 rebóbbegááItxñat

rebóbeRbI

- Command: D


- New Style Name ( eGayeQµaHsMKal; )

- Click Bakü Continue

* Click Bakü Line and Arrows



Dimension Lines

- Color: ( eRCIserIsBN¾Rkhm )

- Lineweigth: ( Bylayer )

- Extend beyond ticks: ( 100 )

Extendsion Lines

- Color: ( eRCIserIsBN¾ébtg )

- Lineweigth: ( Bylayer )

- Extend beyond dimlines: ( 100 )

- Offset from Origin: ( 100 )

Arrowheads

- 1st: ( Oblique )

- 2st: ( Oblique )

- Leader: ( Oblique )

- Arrow Size: ( 100 )



* Click Bakü Text

- Click Icon

- Font Name: ( eRCIserIsBakü Arail )


- kEnøg Style Name: ( eGayeQµaHsMKal; )

- Ok

- Close

- Click Icon

- eRCIserIsBakü Arail

- Text Color: ( eRCIserIsBN¾exov )

- Text height: ( 260 )

Text Placement

- Vertical: ( Above )



- Horizontal: ( Centered )

- Offset from dimlines: ( 100 )

Text Alignment

- eRCIserIsBakü Align With dimension line

* Click Bakü Fit

- eRCIserIsBakü Use Overall Scale of: ( 1 )

* Click Bakü Primary Units

- Unit format: ( Decimal )

- Precision: ( 0 )

- Suffix ( MM )

- Scale factor: ( 1 )



Angular Dimensions

- Units format ( Decimal degrees )

- Precision ( 0.00 )

- Ok

- Set Current

- Close

66. COMMAND : DIMLINEAR

DIMLINAER KWCa Command mYysMrab;eGay

elxkUdCa Horizontal nig Vertical.

66.1 rebóbeRbI DIMLINEAR

rebóbeRbII :

- Command: DLI ( Dimlinear )



- Specify first extension line origin or : ClickcMnuccab;TI1

- Specify second extension line origin: ClickcMnuccab;TI2

67. COMMAND : DIMALIGNED

DIMALIGNED KWCa Command mYysMrab;eGayelxkUdRsbeTAnigTisedA Object.

67.1 rebóbeRbI DIMALIGNED

rebóbeRbII :

- Command: DAL ( Dimaligned )

- Specify first extension line origin or : ClickcMnuccab;TI1

- Specify second extension line origin: ClickcMnuccab;TI2



68. COMMAND : DIMRADUIS

DIMRADUIS KWCa Command mYysMrab;eGay

elxkUdrbs;rgVg;nigGgát;FñÚedayKitecjBIkaM .

68.1 rebóbeRbI DIMRADUIS

rebóbeRbII :

- Command: DRA ( DimRaduis )

- Select arc or circle: ClickcMnuccab;TI1

- location or [Mtext/Text/Angle]: Clickc Mnuccab;TI2

69. COMMAND : DIMDIAMETE

DIMDIAMETER KWCa Command mYysMrab;eGayelxkUdrbs;rgVg; nigGgát;FñÚedayKitecjBIp©it .



69.1 rebóbeRbI DIMRADUIS

rebóbeRbII :

- Command: DDI ( Dimdiameter )

- Select arc or circle: ClickcMnuccab;TI1

- location or [Mtext/Text/Angle]: ClickcMnuccab;TI2

70. COMMAND : DIMANGULAR

DIMANGULAR KWCa Command mYysMrab;eGayelxkUd

eGayGgát;FñÚ énEpñkmYyénrgVg; nigbnÞat;BIrEdlminRsbKña.

70.1 rebóbdak;elxkUdeGayGgát;FñÚ

rebóbeRbII :



- Command: DAN ( DIMANGULAR )

- Select arc, circle, line, or <specify vertex> ClickcMnucTI1

- Dimension arc line [Mtext/Text/Angle]: ClickcMnucTI2

70.2 rebóbdak;elxkUdeGaybnÞat;BIrminRsbKña

rebóbeRbII :

- Command: DAN ( DIMANGULAR )

- Select arc, circle, line, or <specify vertex> ClickcMnucTI1

- Dimension arc line [Mtext/Text/Angle]: ClickcMnucTI2

71. COMMAND : QDIM



QDIM KWCa Command mYysMrab;eGayelxkUdrbs;rgVg;;nigGgát;FñÚedayKitecjBIp©it .

71.1 rebóbeRbI QDIM

rebóbeRbII :

- Command: QDIM ( Qdim )

- Select geometry to dimension: Select ObjectTI1



- [Continuous/Staggered/Baseline/Ordinate/Radius/Diameter/datumPoint/Edit] ClickcMnuccab;1

72. COMMAND : DIMBASELINE



DIMBASELINE KWCa Command mYysMrab;eGayelxkUdbnþrBIrelxkUdEdl)andak;cugeRkay .

elxkUdEdl dak; DIMBASELINE KWcMnucepþImrYm .

71.1 rebóbeRbI DIMBASELINE

rebóbeRbII :

- Command: DBA ( Dimbaseline )

- Specify a second [Undo/Select] <Select>: ClickcMnuccab;TI1

- Select geometry to dimension: Click ObjectTI2

- Select geometry to dimension: Click ObjectTI3

73. COMMAND : IMAGE

IMAGE KWCa Command mYysMrab;ehArUbPaBcUlkñúg Program Auto Cad .



73.1 rebóbehArUbPaB

rebóbeRbII :

- Command: IM ( Image )

- Click elIBakü Attach

- rYceRCIserIs File rUbPaB

- Open

- Ok

- Click cMnuccab;TI1

- Click cMnuccab;T2

74. COMMAND : IMAGE CLIP



IMAGE CLIP KWCa Command mYysMrab;kat;rUbPaB .

74.1 rebóbehAkat;rUbPaB

rebóbeRbII :

- Command: IMAGECLIP

- Select image to clip: Click elIrUbft

- [ON/OFF/Delete/New boundary] <New>: N ( New )

- Delete old boundary? [No/Yes] <Yes>: Y ( Yes )

- [Polygonal/Rectangular] <Rectangular>: R ( Rectangle )

75. COMMAND : IMAGE ADJUST

IMAGEADJUST KWCa Command mYysMrab;EkBN¾rUbPaB .

75.1 rebóbEkBN¾rUbPaB



rebóbeRbI :

- Command: IMAGEADJUST

- Select image(s): Select elIrUbPaB

- rYccab;epþImEkBN¾ - Ok

76. COMMAND : IMAGE FRAME

IMAGEFRAME KWCa Command mYysMrab;

biTs‘umrUbPaB .

76.1 rebóbehAbiTs‘umrUbPaB

rebóbeRbII :



- Command: IMAGEFRAME

- Enter image frame setting [ON/OFF] <ON>: OFF

76.2 rebóbehAebIks‘ umrUbPaB

rebóbeRbII :

- Command: IMAGEFRAME

- Enter image frame setting [ON/OFF] <ON>: ON

77. karbgðajBIrebob PRINT PLAN enAkñúg MODEL SPACE

MODEL SPACE KWCa Command mYysMrab;RBInbøg;enAkñúg Model . ehIykarRBInbøg;enAkñúg Model KW

RtUveRbI Scale tamEdleyIgkMNt; ( 1 / 100 , 1 / 200 , 1 / 300 , 1 / 400 , 1 / 500 , 1 / 600 , 1 / 700 ) .

77.1 rebobRBInbøg;enAkñúg MODEL edaykMNt;TMhMRkdas; A3 någ SCALE 1 / 100



rebóbeRbII :

- Command: REC ( Rectangle )

- [Chamfer/ Fillet/Thickness/Width]: Click cMnuc1

- Specify other [Dimensions]: @ 420 , 297

- Command: SC ( Scale )


- Specify base point: Click cMnuc1

- Specify scale factor or [Reference]: 100

78. COMMAND PLOT

PLOT KWCa Command mYysMrab;RBInbøg; RBInGkSr nig RBInrUbPaB .

kMNt;sMKal;



- PRINTER / PLOTTER - kEnøg Name (sMrab;eRCIserIsma:kmasIunRBIn )

- PAPER SIZE - ( sMrab;eRCIserIsTMhMRkdas )

- PLOT AREA - kEnøg What to Plot ( sMrab;eRCIserIsykeQµaHedIm,I Select Window )

- PLOT OFFSET - Tick ykBakü Center The Plot ( sMrab;eGaybøg;enAcMkNþalRkdas )

- PLOT SCALE - Fit to paper ( sMrab;bRgYm Object eGayeBjépÞRkdas )

- Scale ( sMrab;eRCIserIsmaRtd§an )



- PLOT STYLE TABLE - None ( sMrab;eRCIserIsBN½ = Color )

- Monochrome ( sMrab;eRCIserIsBN½sexµA = Black )

- PLOT OPTION - Hide PaperSpace Object ( sMrab;)aMgépÞ Object )

- DRAWING ORIENTATION - Portrait ( sMrab;eRCIserIsRkdasbQÄr )

- Landscape ( sMrab;eRCIserIsRkdasepþk )

- Plot upside down ( sMrab;eGayRkdasxiteTAxagsþaMéd )

78.1 rebobRBInbøg; 2D enAkñúg MODEL SPACEedaykMNt;TMhMRkdas; A3 någ SCALE 1 / 150

rebóbeRbII :



- Click elIBakü File

- Click elIBakü Plot

- Printer Plotter

- kEnøg Name ( eRCIserIsma:kma:sIunRBIn DWF6ePlot.pc3 )

- kEnøg Paper Size ( eRCIserIsTMhMRkdas = ISO A3 ( 420.00 x 297.00mm )

- kEnøg Scale ( eRCIserIs Scale = 1mm x 150 Units )

- Drawing Orientation

- Tick elIBakü Landscape

- Tick elIBakü Plot upside – Down

- Plot Style Table



- erIsykBakü Monochrome

- What to Plot

- erIsykBakü Window

- Click cMnucTI1

- Click cMnucTI2

- Tick elIBakü Center the plot

- Click elIBakü Preview

- Right Click ykBakü Plot

Date post:	12-Apr-2017
Category:	Engineering
Upload:	thim-mengly
View:	132 times
Download:	25 times

Important Comment used in AutoCAD 2D Khmer Guide

Engineering