60mmØ88 x 60mm Ø88mm

Important Warrant Infomation

The LED Tri-colour Downlight has a 3 yearwarranty. To claim you must provide the productpart number and date of manufacture, which canbe found on the label attached to the luminairehousing.

49-05-01-IG_V1

Ø88 x 60mm

7W

550lm

600lm

550lm

80lm/W

3000K, 4000K and 5500K

>80 CRI

Aluminum + Plastic +Iron

Crilux Lighting

Polycarbonate

IP65/20

Manufactured in China byCrilux Lighting.NET-47-05-01

Step 1: Isolate mains power supply beofre starting any installation. Cut out a mounting hole in the ceilingas per the dimensions in diagram below.

Hole cutout size: Ø65-70mm

Step 2: Wire the LED Driver to the mains supply.

Step 3: Connect the downlight and driver using the inter-locking connectors. Select colour temperatureon the front of luminaire.

Colour Temperature Switch

Step 4: Press clip springs back and push downlight body into the aperture until it’s fixed in the ceilingand switch on the mains supply to test the Downlight for Correct operation.

Additional Front Cover Plate

Available in both Chrome and Satinfinishes.

Available in 2ft, 4ft and 5ftVersions

Satin front coverChrome front cover

Carefully read the installation instructions and ensure the mains supply is isolated before installation. Please read the safety information overleaf before carrying

out any installation. Please retain this leaflet for future reference. Important: When installing, leave a space of at least 1.2m between the LED Downlight and any heatingsource/air conditioning unit.

Robust unitsincorporating advancedchip technology in apolcarbonate IP65housing.