IMPORTATION OF IRON & STEEL AND METAL

PRODUCTSUPDATES ON PROCEDURES AND LATEST DEVELOPMENT

PRESENTATION OUTLINE

INTRODUCTION

LIST OF TARIFF CODES:

a) 187 Tariff Codesb) New Mandatory Standards for Aluminium Sheet and Foil

FLOWCHART – CONSIGNMENT METHODS

CONSIGNMENT VERIFICATION AND SAMPLING

DIFFERENT CHANGES BETWEEN CURRENT AND FUTURE COA ONLINE SYSTEM

OUR TESTING EQUIPMENT AND FACILITIES

SIRIM QAS INTL. SDN. BHD. – BRANCHES OFFICES AND FACILITIES

COA COSTING

CONTACTS AND PERSON-IN-CHARGE

STATISTIC NO. OF APPLICATIONBy Product Type – Shah Alam

STATISTIC NO. OF APPLICATION (JAN - JUNE 2011)By Port of Entry / Locations – SIRIM Shah Alam

STATISTIC NO. OF APPLICATION (JAN - JUNE 2011)By Port of Entry / Locations – SIRIM Penang

STATISTIC NO. OF APPLICATION (JAN - JUNE 2011)By Port of Entry / Locations – SIRIM Johor

STATISTIC NO. OF APPLICATION (JAN - JUNE 2011)By Port of Entry – SIRIM Sarawak

STATISTIC NO. OF APPLICATION (JAN - JUNE 2011)By Port of Entry – SIRIM Sabah

LIST OF TARIFF CODES : 187 TARIFF CODES

NEW MANDATORY STANDARDS FOR ALUMINIUM SHEET AND FOIL

FLOWCHART – CONSIGNMENT METHODS

CONSIGNMENT VERIFICATION AND SAMPLING

CONSIGNMENT VERIFICATION AND SAMPLING

Container Stationed at Inspection Bay

CONSIGNMENT VERIFICATION AND SAMPLING (cont.)

Products Stationed at Inspection Bay

CONSIGNMENT VERIFICATION AND SAMPLING (cont.)

Products Stationed at Factory

CONSIGNMENT VERIFICATION AND SAMPLING (cont.)

Sampling and Cutting Small Samples

CONSIGNMENT VERIFICATION AND SAMPLING (cont.)

Verification Process

CONSIGNMENT VERIFICATION AND SAMPLING (cont.)

Verification Process (Measurement)

CONSIGNMENT VERIFICATION AND SAMPLING (cont.)

Sampling and Cutting Big Samples

CONSIGNMENT VERIFICATION AND SAMPLING (cont.)

Sampling and Cutting Big

Samples

CONSIGNMENT VERIFICATION AND SAMPLING (cont.)

Sampling and Cutting Big

Samples (at Factory)

CONSIGNMENT VERIFICATION AND SAMPLING (cont.)

VERIFICATION AND SAMPLING REPORT

PORT TRACKING SYSTEM - WEST PORT & NORTH PORT

PORT TRACKING SYSTEM (West Port)

BLOCK

PORT TRACKING SYSTEM (North Port)

YES

DIFFERENT CHANGES BETWEEN CURRENT AND

FUTURE COA ONLINE SYSTEM

Details Current COA Online System

Future COA Online System

Issuance of Quotation

Manually issued to Client (sent thru fax).

Thru online – Client can view and print out the Quotation in online system.

Details Current COA Online System

Future COA Online System

Payment Process

Client can make payment:

a)At One-Stop-Centre (Building 25) OR

b)Thru Bank/EFT/TT (Client need to fax a copy of bank-in slip, cheque and receipt to SIRIM for confirmation).

Client can make online payment.

Details Current COA Online System

Future COA Online System

Schedule Planning

Client can call SIRIM’s Scheduler to arrange verification and sampling OR Scheduler will call Client to propose date and time for verification activity.

SIRIM’s Scheduler will view COA Application, confirms ETA and enters proposed date and time for verification activity into system.

Client can choose to accept or decline proposed date.

If Client decline: Client must provide new proposed date.

Upon confirmation of schedule date, Scheduler will arrange SIRIM’s Officer to do the verification activity.

Details Current COA Online System

Future COA Online System

COA Certificate

Client is not able to print out the COA Certificate. COA Certificate will be courier to Client.

The online system will allow Client to print out the COA Certificate.

Details Current COA Online System

Future COA Online System

Issuance of Test Report

SIRIM will courier the hardcopy of Test Report to Client.

The online system will allow Client to print out the Test Report.

Details Current COA Online System

Future COA Online System

Cut-off Date No cut-off date available. Application only can be made within 3 months before ETA;

Once quotation issued, the cut off period will be 1 month after the issuance of quotation;

Once payment made, the cut off period will be 2 weeks after payment received.

Details Future COA Online System

Combined Verification 2 applications of same type; Limit to 5000 MT; Shipment within 7 days interval.

OUR TESTING EQUIPMENT AND FACILITIES

• Tensile • Shear Strength• Pull Out Test• Slip Test• Fatigue Test• Compression

Tensile Testing

Involves straining a test piece in tension, generally tofracture for the purpose of determining mechanicalproperties.

Tensile Testing

Involves straining a test piece in tension, generally tofracture for the purpose of determining mechanicalproperties.

MECHANICAL TESTMECHANICAL TEST

Servo Hydraulic Universal Testing Machine

Servo Hydraulic Universal Testing Machine

Dynamics Machine 1000 kN Dynamics Machine 1000 kN

Instron 200kNInstron 200kN

MECHANICAL TESTMECHANICAL TEST

Hardness Testing

Hardness is the resistance to plastic deformation.Determined by the ability of a materialto scratch another, diamond being thehardest and talc the softer.

Hardness Testing

Hardness is the resistance to plastic deformation.Determined by the ability of a materialto scratch another, diamond being thehardest and talc the softer.

- Major loads for the Standard Rockwell test are 60, 100, and 150 kg

- HRA, HRB and HRC

- According to ASTM E 18/ ASTM A 370

- Major loads for the Standard Rockwell test are 60, 100, and 150 kg

- HRA, HRB and HRC

- According to ASTM E 18/ ASTM A 370

MICRO HARDNESS

Load range divide into two:

- Micro = 1 to 1000 grams

- Macro = above 1000 grams

Load range divide into two:

- Micro = 1 to 1000 grams

- Macro = above 1000 gramsROCKWELL

Load : Up to 3000 kg

Ball Indentor : 5 & 10 mm

Load : Up to 3000 kg

Ball Indentor : 5 & 10 mm

BRINELL

Charpy Impact Testing

MECHANICAL TESTMECHANICAL TEST

Capacity:

• Up to 300 J

• In House specimen preparation

• According to BS 131 / ASTM A 370 / BS EN 10045-1/ AS 1544.2

Capacity:

• Up to 300 J

• In House specimen preparation

• According to BS 131 / ASTM A 370 / BS EN 10045-1/ AS 1544.2

CHARPY TEST SPECIMEN

CHEMICAL COMPOSITIONCHEMICAL COMPOSITIONTESTING EQUIPMENTTESTING EQUIPMENT

SPECTROMETER SHIMADZU PDA-7000

PORTABLE XRF (ALPHA)

PORTABLE XRF (DELTA)

WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE

SPECTROMETER

Elements analyzed:

• Carbon, Silicon, Manganese, Phosphorus, Sulphur, Nickel, Chromium

• Total Elements : 32 Elements

Elements analyzed:

• Carbon, Silicon, Manganese, Phosphorus, Sulphur, Nickel, Chromium

• Total Elements : 32 Elements

COATING MASS TESTCOATING MASS TEST

TEST SAMPLE WEIGHING TEST SAMPLE EXTRACT COATING MATERIAL

COATING MATERIAL EXTRACTED

WEIGHING TEST SAMPLE AFTER EXTRACTION OF COATING MATERIAL

TYPICAL PRODUCT & TENSILE TEST SPECIMEN PREPARATION

CHANNEL ANGLE I-BEAM PIPE SHEET COIL

RECTANGULAR TEST SPECIMEN -

BEFORE TEST

CIRCULAR TEST SPECIMEN -

BEFORE TEST

RECTANGULAR TEST SPECIMEN

- AFTER TEST

CIRCULAR TEST SPECIMEN - AFTER TEST

TYPICAL PRODUCT (cont.) & TEST

MANHOLE COVER & FRAME

LOAD TEST

BREAKING LOAD TEST OF WIRE ROPE

WIRE ROPE

BREAKING LOAD TESTPC STRAND

SIRIM QAS INTERNATIONAL SDN. BHD.- BRANCHES OFFICES

AND FACILITIES

FRONT OFFICE SQAS FRONT COUNTER

SPECTROMETER SHIMADZU PDA-7000

XRF ANALYZERXRF ANALYZER

UTM 1000kN

SIRIM PENANG

FRONT OFFICE

MAIN ENTRANCE

SPECTROMETER SHIMADZU PDA-7000

XRF ANALYZERXRF ANALYZER

UTM 1000kN

SIRIM JOHOR

SPECTROMETER SHIMADZU PDA-7000

UTM 1000kN

XRF ANALYZER

UTM 200kN

FRONT OFFICE

SQAS FRONT COUNTER

SIRIM SARAWAK

FRONT OFFICE

SPECTROMETER SHIMADZU PDA-7000

XRF ANALYZERXRF ANALYZER UTM 1000kN

MAIN ENTRANCE

SIRIM SABAH

COA COSTING

SIRIM QAS implemented COA since Nov 2008 with 57

tariff lines made Mandatory

COA application was processed and approved only from Shah Alam office

Initial Costing:-

Application/Processing Fee : RM 500 Verification Fee : RM 2000 – RM 2500 Testing Fees : Varies, depending on product standards

BACKGROUND OF COA COSTING

First Review : 2009 (Announced through letter to MITI, signed by SGM, SIRIM QAS)

Verification Fee has been capped to RM 2000

Second Review : 2009 (Announced by SIRIM QAS MD, during briefing to Deputy Minister MITI, and agreed by MITI, MISIF and FMM)

Application Fee has been substantially reduced from RM500 to RM150.

Verification Fee standardized at RM1000, since SIRIM QAS started its COA activities at branches : Penang, Johor, Sabah and Sarawak.

Sampling Plan : Increased from 1 sample for every 100MT to 1 sample for every 250MT.

BACKGROUND OF COA COSTING (cont.)

FIXED FEE Application : RM150 Verification : RM1000* * This fee represent a compromised figure that reflects a balance fee for all operations throughout Malaysia (Shah Alam, Johor, Penang, Pahang, Sabah & Sarawak)

VARIABLE FEE Testing (based on Sampling Plan) Testing based on different product standards

ELEMENTS OF COA FEE

FOR VOLUME

EXCEEDS

5000 MT

5 % DISCOUNT

ON TESTING

FEES

GOOD NEWS – FURTHER DISCOUNT

EFFECTIVE DATE FOR NEW DISCOUNT:

13th OCTOBER 2011

CONTACTS & PERSON-IN-CHARGE

CONTACTS

SIRIM Shah Alam

Address Building 22SIRIM QAS International Sdn. Bhd.No.1, Persiaran Dato’ Menteri40700 Shah AlamSelangor Darul Ehsan

Tel. No. 03 – 5544 5852 (Pn. Raja Nor Siha Raja Abd Hanan – Section Head)

03 – 5544 5878 (Pn. Seri Banun Sujangi – Group Leader)

03 – 5544 5874 (En. Dalha Rahmat – Group Leader)

03 – 5544 5867 (En. Faiz Mohd Yusuf – Senior Technical Executive)

Fax No. 03 – 5544 5186 / 5855 / 5886

CONTACTS (cont.)

SIRIM Shah Alam(Enquiry & Quotation)

Tel. No. 03 – 5544 5184 (Pn. Zaryatul Akma)

03 – 5544 5032 (En. Sakuwan)

03 – 5544 5182 (Cik Liana)

03 – 5544 5031 (En. Shukri)

03 – 5544 5183 (En. Farizzul)

Fax No. 03 – 5544 5186

03 – 5544 5855

SIRIM Shah Alam(Schedule for Verification &

Inspection)

Tel. No. 03 – 5544 5187 (Pn. Sabrina)

03 – 5544 5033 (Pn. Hayati)

Fax No. 03 – 5544 5186

03 – 5544 5855

CONTACTS (cont.)

SIRIM Shah Alam(Testing)

Tel. No. 03 – 5544 5880 (En. Fahim)

03 – 5544 5180 (En. Azlan)

03 – 5544 5880 (En. Waheedir)

Fax No. 03 – 5544 5186

03 – 5544 5855

SIRIM Shah Alam(Verification & Inspection)

West Port P.I.C. : En. Zaimar

Tel. No. : 03 – 3101 1455/1457

Fax No. : 03 – 3101 1453

North Port P.I.C. : En. Mohd Dasuki

Tel. No. : 03 – 3176 1431/1435

Fax No. : 03 – 3176 1439

CONTACTS (cont.)

SIRIM Johor

Address No. 3, Jalan Teknologi 5Taman Teknoloogi Johor81400 SenaiJohor Darul Takzim

Tel. No. 07 – 599 8364

07 – 599 8367

Fax No. 07 – 598 7059

P.I.C Tn. Hj. Ahmad Rumizi Jasmin

En. Mohd Helmi Kamdari

En. Mohd Ridha Noraship

En. Shaiful Hisam Samat

Pn. Zuraidah Padil

SIRIM Penang

Address 483, Mukim 6Jalan Permatang Pauh13500 Permatang PauhSeberang PraiPulau Pinang

Tel. No. 04 – 537 7435

04 – 538 4260

Fax No. 04 – 538 4261

P.I.C En. Mohamad Zakaria

En. Mohd Fairuz Ismail

En. Mohd Haniff Abu Hassan

En. Mohd Faisol Morat

En. Saiful Nazri Ramlee

CONTACTS (cont.)

SIRIM Sarawak

Address Lot 802Taman Perindustrian Demak LautJalan Bako, Peti Surat 329293764 KuchingSarawak

Tel. No. 082 – 439 052

082 – 439 054

Fax No. 082 – 439 060

P.I.C En. Kasvenda Kasim

En. John Melvin a/k Peter

Pn. Norida Bujang

SIRIM Sabah

Address Lot 1, No. 6 Jalan 1KKIP Timur Commercial Zone 2Kota Kinabalu Industrial Park88460 Sabah

Tel. No. 088 – 497 048

088 – 497 082

Fax No. 088 – 496 357

P.I.C Pn. Reena Rahman

En. Bonaventure @ Hamzah Abie

En. Andy Azman Lantara

PROCEDURES AND UPDATES

http://www.sirim-qas.com.my

THANK YOU FOR YOUR ATTENTION

THANK YOU FOR YOUR ATTENTION