Industrial coating Technological innovation and customized solution – since 1922
01 Feeding Device02 Sanding Machine03 Roller Coating Machine 04 Dispersing Machine05 Air Jet Drying Tunnel06 Filler Coating Machine 07 UV Unit 08 UV Unit09 Sanding Machine 10 Angle Transfer11 Twin Roller Coating Machine
12 UV Unit13 Roller Coating Machine14 UV Unit15 Roller Coating Machine16 UV Unit17 Sanding Machine18 Roller Coating Machine 19 UV Unit20 Roller Coating Machine21 UV Unit22 Stacking Device
01
21
05
17
12
03
19
07
1510
02
20
22
06
16
11
04
18
13
0809
14
©
LOBA - 90 Years on Top, a success story!
LOBA has devoted itself to the finishing, cleaning and maintenance of various types of flooring for 90 years now. Profit from the immense value of experience that LOBA has gained in this time. LOBA banks on continuity, even in its manufacturing practices, and maintains its market position primarily through constant innovation. With offices in more than 50 countries LOBA is a competent partner all over the world. All LOBA products are manufactured exclusively in our Ditzingen plant, near Stuttgart, Germany.
Premium Industrial Coatings For the floor manufacturing industry LOBA offers a wide range of premium industrial oils and finishes such as: • UV oils and finishes • Waterborne finishes • Natural oils Example of a coating line for floorings
2
What you can expect from LOBA.
LOBA plays a leading role in the research and development of new technologies for floor finishes, e.g. the world’s first low-emission and clear fire-retardant floor finish system. LOBA stands for competitive products, latest technology, maximum reliability and partnership including consultation, recommendations for set ups of production lines, adjustment of products to customer’s needs and after sales service. For Mankind and the Environment Out of a sense of responsibility for customers, employees and the environment LOBA has been committed to the development of waterborne and low-emission products for many years now. LOBA reduces solvent content and uses natural raw materials. In October 2011 LOBA was awarded certification for its quality and environmental management system in accordance with ISO 9001:2008 and 14001:2004. Customizing This catalogues shows LOBA’s standard products and set up recommendations. It is part of our philosophy to adjust the systems to fit our customer’s quality specifications and based on their production lines. Floor-care and Cleaning Products – Reliable Protection is the Best Maintenance Finished or oiled floors require routine maintenance to keep them looking beautiful and new. With the periodically use of professional wood floor cleaners and maintenance products they can last a lifetime and bring a long-term maintenance of value. What could be easier than profiting from LOBA’s extensive competence in the development of care and maintenance products? After all, the long-term protection of floors is part of LOBA’s philosophy! Our wide range of products offers just the right solution for every application. Add value to your offerings with LOBA’s floor-care and cleaning products as your OEM product? LOBA’s OEM products can be adjusted to your needs, i.e. the product carries your label and your logo. Please contact us for your individual quotation. Renewal, Repair and Recoating Renewal and repair of finished and oiled floors is usually possible. LOBA offers not just the right solutions for that but even more – e.g. with WS 2K Contact. Since its introduction the times of completely sanding down a finished floor for renewal is over. WS 2K Contact, a waterborne primer that gives waterborne finishes an effective hold on UV-coated multi-layer parquet flooring, helps save time and clean-up by eliminating the need for intermediate sanding and makes it possible to achieve new surface properties (fire retardancy, edge protection, anti-slip, UV-protection etc.) by applying a new coat of waterborne finish. It can be used not only on newly installed floors, but also for floor refurbishing projects. Contact us for more detailed information: [email protected]
3
1. HydroPrimer 5 – 10 g/m²Art. No. 40400Roller Coater
AlternativelyHydroPrimer deepArt. No. 40404Roller Coater
Flash off for 30 s / 40°C
Can be used for staining as well when LOBATOOL Color paste HF is used(Art. No. 15338)
2. UV heavy Filler 25 – 40 g/m²For heavy filler machinesArt. No. 40375Heavy filler machine
AlternativelyUV light FillerFor light filler machinesArt. No. 40393Light filler machine or single head roller Curing2-3 UV lamps (80-120 W/cm)min. 350 mJ/cm²
Sanding # 240-280
3. UV Sealer 15 – 25 g/m²Art. No. 40391Roller Coater Semi-Curing1 UV lamp (80 W/cm)max. 170 mJ/cm²
Recommendation of use:Final wood sanding: # 60/120/180
4. UV Sanding Sealer 25 – 30 g/m²Art. No. 40392Roller Coater Curing2-3 UV lamps (80-120 W/cm)min. 350 mJ/cm²
Sanding # 240-280
6. UV Parkettlack 5 – 7 g/m²Art. No. 40386Roller Coater Curing2-3 UV lamps (80-120 W/cm)min. 350 mJ/cm² Packaging
5. UV Parkettlack 5 – 7 g/m²Art. No. 40386Roller Coater Semi-Curing1 UV lamp (80 W/cm)max. 170 mJ/cm²
Sanding Machine
RollerCoater
Flash off 30 s / 40°C
RollerCoater
RollerCoater
RollerCoater
RollerCoater
Filling-Machine
2–3 UV-lamps
2–3 UV-lamps
2–3 UV-lamps
1 UV-lamp
1 UV-lamp
Sanding Machine
Sanding Machine
1 2 3 4 5 6
4
UV coating system Standard
Wood Floors
1. HydroPrimer 5 – 10 g/m²Art. No. 40400Roller Coater
AlternativelyHydroPrimer deepArt. No. 40404Roller Coater
Flash off for 30 s / 40°C
Can be used for staining as well when LOBATOOL Color paste HF is used(Art. No. 15338)
3. UV Sealer antiabrasive 20 – 40 g/m²Art. No. 40418Roller Coater Semi-Curing1 UV lamp (80 W/cm)max. 170 mJ/cm²
For higher abrasion resistance apply another layer of UV Sealer antiabrasive UV-Sealer antiabrasive can not to be sanded
Recommendation of use:Final wood sanding: # 60/120/180
2. UV heavy Filler 25 – 40 g/m²For heavy filler machinesArt. No. 40375Heavy filler machine
AlternativelyUV light FillerFor light filler machinesArt. No. 40393Light filler machine or single head roller Curing2-3 UV lamps (80-120 W/cm)min. 350 mJ/cm²
Sanding # 240-280
4. UV Topcoat antiscratch 5 – 7 g/m²Art. No. 40412Roller Coater Semi-Curing1 UV lamp (80 W/cm)max. 170 mJ/cm²
5. UV Topcoat antiscratch 5 – 7 g/m²Art. No. 40412Roller Coater Curing2-3 UV lamps (80-120 W/cm)min. 350 mJ/cm² Packaging
Flash off 30 s / 40°C
1 2 3 4 5
Sanding Machine
RollerCoater
RollerCoater
RollerCoater
RollerCoater
Filling-Machine
2–3 UV-lamps
2–3 UV-lamps
1 UV-lamp
1 UV-lamp
Sanding Machine
5
UV coating system Anti-scratch
Wood Floors
Recommendation of use:Final wood sanding: # 120-180
1. HydroPrimer 10 g/m²Art. No. 40400Roller Coater
AlternativelyHydroPrimer deepArt. Nr. 40404Roller Coater
Flash off for 30 s / 40°C
2. UV SpeedOil Basecoat 15 – 25 g/m²Art. No. 40004Roller Coater
Curing2-3 UV lamps (80-120 W/cm)min. 300 mJ/cm²
Sanding # 240
3. UV SpeedOil Topcoat matt 4 – 7 g/m²Art. No. 40001Roller Coater Curing2-3 UV lamps (80-120 W/cm)min. 350 mJ/cm² Packaging
UV Oil
6
Wood Floors
Sanding Machine
RollerCoater
RollerCoater
RollerCoater
Flash off 30 s / 40°C
2–3 UV-lamps
2–3 UV-lamps
Sanding Machine
1 2 3
Recommendation of use:Final wood sanding: # 120-180
1. OxiOil (Color) 10 – 15 g/m²Art. No. 10604Roller Coater
Remove excessive material with a brushing machine or a pad Stacking on a rack
Drying 12 h Packaging For manual final finish on site: Apply LOBACARE® ParkettOil Deluxe (Art. No. 10469) as primary care after installation.
For factory final finish: 2. OxiOil 5 – 10 g/m²Art. No. 10604Roller Coater
Remove excessive material with a brushing machine or a pad Stacking on a rack
Drying 12 h Packaging
OxiOil and OxiOil Color
7
Wood Floors
1
Sanding Machine
RollerCoater
Dispersing Machine
Bilinga
Jatoba
Papyrus
Kambala
Smoked Oak
Mahogany
Sucupira
Transparent
White
Black
Wenge
Recommendation of use:Final wood sanding: # 120-180
1. HardwaxOil (Color) 10 – 15 g/m²Art. No. 10510Roller Coater
Remove excessive material with a brushing machine or a pad Stacking on a rack
Drying 12 h
2. HardwaxOil 5 – 10 g/m²Art. No. 10510Roller Coater
Stacking on a rack
Drying 12 h Packaging
HardwaxOil and HardwaxOil Color
Wood Floors
8
Sanding Machine
RollerCoater
RollerCoater
Dispersing Machine
1 2
Recommendation of use:Final wood sanding: # 120-180
1. WS 2K Duo RA 40 – 50 g/m²Art. No. 11522Roller Coater (Rill Roller)
Stacking on a rack
Drying 12 h Sanding # 240-280
2. WS 2K Duo RA 20 – 30 g/m²Art. No. 11522Roller Coater (Rill Roller)
Stacking on a rack
Drying 12 h For higher abrasion resistance apply another layer of WS 2K Duo RA Packaging
Waterborne coating RA
Wood Floors
9
1 2
Sanding Machine
RollerCoater
RollerCoater
Sanding Machine
Recommendation of use:Final sanding: # 280-320
1. UV Cork Primer 35 – 50 g/m²Art. No. 40416Roller Coater (Double Head Revers)
Curing 2-3 UV lamps (80 W/cm) 300-350 mJ/cm2
Sanding # 240-280
2. UV Cork Primer 20 – 25 g/m²Art. No. 40416Roller Coater (Double Head Revers)
Curing 2-3 UV lamps (80 W/cm) 300-350 mJ/cm2
Sanding # 240-280
3. UV Cork Topcoat 10 – 15 g/m²Art. No. 40417Roller Coater
Curing 3 UV lamps (80-120 W/cm) 300-350 mJ/cm2 Packaging
UV coating system Standard
Cork Floors
10
Sanding Machine
RollerCoater
RollerCoater
RollerCoater
2–3 UV-lamps
2–3 UV-lamps
3 UV-lamps
Sanding Machine
Sanding Machine
1 2 3
Recommendation of use:Final sanding: # 280-320
1. WS Kork Baselack CM 60 – 80 g/m²Art. No. 11515Curtain Coater
Drying Ventilation /Air Jet Drying Tunnel 2-4 min / 40°C
2. WS Kork Baselack CM 60 – 80 g/m²Art. No. 11515Curtain Coater
Drying Ventilation /Air Jet Drying Tunnel 2-4 min / 40°C To obtain a smoother surface sand the floor lightly before applying the final coat.
3. WS Kork Toplack CM 50 – 60 g/m²Art. No. 11514Curtain Coater
Drying Ventilation /Air Jet Drying Tunnel 4 min / 40°C Cooling
Stacking immediately top to bottom Packaging
4. Alternatively for higher abrasion and impact resistance WS 2K Duo CM matt 50 – 60 g/m2
Art. No. 11502Curtain Coater Cooling
Stacking on a rack Drying 12 h Packaging
Waterborne coating system Curtain Coater application
Cork Floors
11
1 2 3
Sanding Machine
Curtain Coater
Curtain Coater
Curtain Coater
Venti-lation
Venti-lation
Venti-lation
Recommendation of use:Final sanding: # 280-320
1. WS 2K Duo RA 30 – 50 g/m²Art. No. 11522Roller Coater (Rill Roller)
DryingVentilation / Air Jet Drying Tunnel2-4 min / 40°C
2. WS 2K Duo RA 30 – 40 g/m²Art. No. 11522Roller Coater (Rill Roller)
DryingVentilation / Air Jet Drying Tunnel2-4 min / 40°C
3. WS 2K Duo RA 20 – 30 g/m²Art. No. 11522Roller Coater (Rill Roller)
DryingVentilation / Air Jet Drying Tunnel4 min / 40°C Cooling
Stacking on a rack Drying 12 h Packaging
Waterborne coating system Roller Coater application
Cork Floors
12
1 2 3
Sanding Machine
Roller Coater
Roller Coater
Roller Coater
Venti-lation
Venti-lation
Venti-lation
Recommendation of use:Final sanding: # 280-320
1. WS Baselack RA glossy 30 – 40 g/m²Art. No. 11541Roller Coater (Rill Roller or Sponge Roller)
DryingVentilation / Air Jet Drying Tunnel2-4 min / 40°C
2. WS Baselack RA glossy 20 – 30 g/m²Art. No. 11541Roller Coater (Rill Roller or Sponge Roller)
DryingVentilation / Air Jet Drying Tunnel2-4 min / 40°C
3. WS Kork Toplack RA 20 – 30 g/m²Art. No. 11523Roller Coater (Rill Roller)
DryingVentilation / Air Jet Drying Tunnel4 min / 40°C Cooling
Stacking immediately top to bottom Packaging This floor will be finished on site by applying one or two layers of LOBADUR® WS 2K Duo.
Waterborne coating system Roller Coater application – Prefinished floors
Cork Floors
13
1 2 3
Sanding Machine
Roller Coater
Roller Coater
Roller Coater
Venti-lation
Venti-lation
Venti-lation
Recommendation of use:Final sanding: # 280-320
A) White and light Colors 1. Korksperrgrund 20-40 g/m²Art. No. 11360Mixed with LOBATOOL Color WSArt. No. 16259Single or double head Roller Coater (Sponge Roller)
DryingVentilation/Air Jet Drying Tunnel 1 min / 40°C
Cooling
Optionally a scond layer can be applied (repeat step 1). Can be finished with LOBACOATING
waterborne or UV coatings.
Stacking immediately top to bottom Packaging
B) Dark Colors 1. WS Cork 20-40 g/m²Art. No. 11428Mixed with LOBATOOL Color WSArt. No. 16259 Single or double head Roller Coater (Sponge Roller)
DryingVentilation/Air Jet Drying Tunnel 1 min / 40°C
Cooling Optionally a scond layer can be applied (repeat step 1). Can be finished with LOBACOATING
waterborne or UV coatings.
Stacking immediately top to bottom Packaging
Waterborne coating system Coloring
Cork Floors
14
1
Sanding Machine
Roller Coater
Venti-lation
Recommendation of use:
1. UV Varnish Antiscratch for PVC 10 – 15 g/m²Art. Nr. 40415Roller Coater
Semi-Curing 1 UV lamp (80 W/cm) max. 170 mJ/cm2
2. UV Varnish Antiscratch for PVC 10 – 15 g/m²Art. Nr. 40415Roller Coater
Curing 2-3 UV lamps (80-120 W/cm) min. 350 mJ/cm2 Packaging
UV coating system
PVC Floors (PVC tiles)
15
1 2
RollerCoater
RollerCoater
1 UV-lamp
2–3 UV-lamps
LOBA GmbH & Co. KG Leonberger Str. 56-62 | 71254 Ditzingen | Germany | Tel.: +49 7156 357-0 Fax: +49 7156 357-211 | E-Mail: [email protected] | www.loba.de
Loba-Wakol Polska Sp. z. o.o.ul. Sławęcińska 12, Macierzysz | 05-850 Ożarów Mazowiecki | PolenTel.: +48 22 834 03 33 | Fax: +48 22 43 624 21 | E-Mail: [email protected] www.loba-wakol.pl
Loba-Wakol LLC 9600 B Southern Pine Boulevard | Charlotte, NC 28273 | United StatesTel.: +1 (704) 527 5919 | Fax: +1 (704) 527 5922 | E-Mail: [email protected] www.loba-wakol.com
LOBA Shanghai Representative OfficeGerman Centre Shanghai, Unit 755 A | 88 Keyuan Road, Pudong New District Shanghai 201203 | P. R. China | Tel.: +86 21 2898 6750 | Fax +86 21 2898 6751 A
rt.-
No.
847
00-G
B /
Aug
. 201
2 /
200