Use in Entertainment Market

Unique Features of Industry Tape

• Zero Residue *

• Repositionable

– Able to remove and reapply

– Adhesion strength remains after removal for multiple uses.

• Easy Tear

• Straight/clean 90 degree tear each time

• Can be removed from adhesive-to-adhesive contact

– Adhesion strength remains for use after being peeled apart.

• Weather Resistant

• Moisture Resistant

• No Shelf Life **

• Lightweight

• Puncture Resistant

* If not subject to prolonged adhesion and/or high temperatures.

** No foreseeable shelf life if stored under recommended conditions.

Some Notable Current Customers/Users

• Expendable Stores– Sony

– Warner Brothers

– Quixote

– Cinelease

– The Set Shop (NYC)

• Productions– Mad Men

– Greys Anatomy

– Iron Man

– Batman: The Dark Knight Rises

– Rules of Engagement

Caution Text

• This tape is designed and to be used for general masking purposes.

• Avoid prolonged contact with skin. May cause irritation.

• Do not use as an electrical insulation tape.

• Do not use on PVC, natural marble stones, unfinished wood, decorated wooden boards, uncured coatings or delicate surfaces. Test before use. This tape may damage the surfaces and/or leave residue.

• Use only on clean , dry surfaces

• For best performance, use within 6 months of purchase. Store in a dark, cool place.

– Store horizontally in a dark, cool place, (1) between 32º and 86º F, (2) 40% to 60% relative humidity, (3) no direct sunshine exposure, and (4) and no corrosive gas exposure. Tape may not perform and may become deformed if it is not stored in these conditions. FAILURE TO STORE THE PRODUCT UNDER THESE CONDITIONS WILL VOID ANY WARRANTY.

• LIMITATION OF REMEDY AND LIABILITY : Replace of the product or refund of the purchase price, at our option, shall be your exclusive remedy. We will not be liable for any loss or damage arising from this product, whether direct, indirect, special, incidental, or consequential.

Grades Used in Entertainment Market

DS-169-1

• Dimensions– Width: 1”– Length: 22 yards

• Applications– Set design– Securing items on set

• EX: to hold a glass on a table in place

– To hang items temporarily on walls w/o worry of residue

– Replaces ATG tape (SNOT Tape) for securing lighting gels to frames. SNOT tape is very messy and Gaffers do not like dealing with this product.

• Much easier to use (not messy) and gels can be removed and reapplied with our tape.

• Unique Properties:•Double stick

•One side has a stronger, more permanent adhesive strength. The the other side has a weaker adhesive strength and is more temporary.

DS-169-2

• Dimensions

– Width: 2”

– Length: 22 yards

• Applications

– Set design

– Securing items on set

– To hang items temporarily on walls w/o worry of residue

• Unique Properties:•Double stick

•One side has a stronger, more permanent adhesive strength. The the other side has a weaker adhesive strength and is more temporary.

DS-1414-1

• Dimensions

– Width: 1”

– Length: 22 yards

• Applications

– Set design

– Securing items on set

– To hang items temporarily on walls w/o worry of residue

• Unique Properties:•Double stick

•Both sides has a strong, more permanent adhesive strength.

IT-09-GR

• Dimensions– Width: 2”

– Length: 27 yards

• Applications– Set design

– Taping with green set features (trees, grass)

– Secure electrical connectors together with very minimal to no residue, even under higher temperatures.

– Taping wires to secure them together. Leaves no residue.

• Note: Industry Tape is not insulating, so do not recommend its use as an electrical tape.

• Most set personnel are used to working with black and white, so those are our most popular colors. However, the green does find use on set.

IT-10-2

• Dimensions– Width: 2”

– Length: 27 yards

• Applications– Set design

– Taping apple boxes together

– Secure electrical connectors together with very minimal to no residue, even under higher temperatures.

– Taping wires to secure them together. Leaves no residue.

• Note: Industry Tape is not insulating, so do not recommend its use as an electrical tape.

• Comes in black and white. We can do the other colors found in the spike tape set in this 2” width or custom widths if the order size is large enough.

MIT-10

• Dimensions

– Width: 2”

– Length: 27 yards

• Applications

– All around set use• Used for all types of taping

applications that may or may not require a matter finish.

• Matte finish allows for use in shot without worry of glare.

– Labeling• Can write on with Sharpie and erase

with alcohol pad to re-label.

• Unique Properties:•Matte finish

•Matte finish allows for this tape to be used in frame without any worry of a glare coming from the tape’s surface.

Spike Tape Set

• Dimensions

– Width: 1/2”

– Length: 27 yards

• Applications

– Floor/Stage marking

– Color coding equipment

– Directional marking on set

• The spike tape set includes 7 different colors along with an Industry Tape lanyard.

• The spike tapes can be sold separately as well in all 7 colors.

IT-30-2

• Dimensions

– Width: 2”

– Length: 27 yards

• Applications

– Set design

– Higher adhesion strength of this grade allows for use when stronger adhesion is necessary.

• Comes in black and white.

* With the stronger adhesive, the possibility of residue from this tape is increased. However, still will leave much less residue than typical Gaffers tapes.