Copyright © 2019 Infor
Important Notices The material contained in this publication (including any supplementary information) constitutes and contains confidential and proprietary information of Infor.
By gaining access to the attached, you acknowledge and agree that the material (including any modification, translation or adaptation of the material) and all copyright, trade secrets and all other right, title and interest therein, are the sole property of Infor and that you shall not gain right, title or interest in the material (including any modification, translation or adaptation of the material) by virtue of your review thereof other than the non-exclusive right to use the material solely in connection with and the furtherance of your license and use of software made available to your company from Infor pursuant to a separate agreement, the terms of which separate agreement shall govern your use of this material and all supplemental related materials ("Purpose").
In addition, by accessing the enclosed material, you acknowledge and agree that you are required to maintain such material in strict confidence and that your use of such material is limited to the Purpose described above. Although Infor has taken due care to ensure that the material included in this publication is accurate and complete, Infor cannot warrant that the information contained in this publication is complete, does not contain typographical or other errors, or will meet your specific requirements. As such, Infor does not assume and hereby disclaims all liability, consequential or otherwise, for any loss or damage to any person or entity which is caused by or relates to errors or omissions in this publication (including any supplementary information), whether such errors or omissions result from negligence, accident or any other cause.
Without limitation, U.S. export control laws and other applicable export and import laws govern your use of this material and you will neither export or re-export, directly or indirectly, this material nor any related materials or supplemental information in violation of such laws or use such materials for any purpose prohibited by such laws.
Trademark Acknowledgements The word and design marks set forth herein are trademarks and/or registered trademarks of Infor and/or related affiliates and subsidiaries. All rights reserved. All other company, product, trade or service names referenced may be registered trademarks or trademarks of their respective owners.
Publication Information Release: Infor LN Analytics Foundation for Birst
Publication date: February 25, 2019
Infor LN Analytics Foundation for Birst User Guide | 3
Contents
About this guide ................................................................................................................................... 7
Intended audience ........................................................................................................................... 7 Related documents .................................................................................................................... 7
Contacting Infor................................................................................................................................ 7
Chapter 1 Navigating the dashboard ............................................................................................. 8
Using the toolbar .............................................................................................................................. 8
Viewing data .................................................................................................................................... 9 Hovering .................................................................................................................................... 9 Changing report types ............................................................................................................. 10 Turning the data series in a chart on or off ............................................................................. 10 Drilling down data .................................................................................................................... 10 Visual highlighting and filtering ................................................................................................ 10
Selecting attributes or measures ................................................................................................... 10 Using filters .............................................................................................................................. 11
Using the standard filter .................................................................................................... 11 Using the Filter cards ........................................................................................................ 11 Using the embedded filters ............................................................................................... 11
Changing sorting in ranking ..................................................................................................... 11 Using the column selector ....................................................................................................... 12
Chapter 2 Analytics overview ....................................................................................................... 13
About LN Analytics ........................................................................................................................ 13
Analytics components .................................................................................................................... 13
Dimensions .................................................................................................................................... 13 Addresses ................................................................................................................................ 14 Customer Defined Fields ......................................................................................................... 15 Enumerates ............................................................................................................................. 16 Time ......................................................................................................................................... 17 UTC dates ................................................................................................................................ 18
Contents
4 | Infor LN Analytics Foundation for Birst User Guide
Deletions .................................................................................................................................. 18
Facts .............................................................................................................................................. 19 Amounts and currencies .......................................................................................................... 19 Quantities and units ................................................................................................................. 20 Deletes ..................................................................................................................................... 21
Reports........................................................................................................................................... 21
Dashboards .................................................................................................................................... 21
Chapter 3 Conformed dimensions ............................................................................................... 22
Address .......................................................................................................................................... 23
Buy-from BP ................................................................................................................................... 25
Calendar Period ............................................................................................................................. 26
Company ........................................................................................................................................ 27
Cost Component ............................................................................................................................ 30
Department .................................................................................................................................... 31
Employee ....................................................................................................................................... 32
Invoice-to BP .................................................................................................................................. 35
Item ................................................................................................................................................ 37
Pay-by BP ...................................................................................................................................... 40
PCS Project ................................................................................................................................... 42
Product Variant .............................................................................................................................. 44
Project ............................................................................................................................................ 45
Reason ........................................................................................................................................... 50
Return Reason ............................................................................................................................... 51
Ship-to Address ............................................................................................................................. 51
Ship-to BP ...................................................................................................................................... 51
Site ................................................................................................................................................. 53
Sold-to Address ............................................................................................................................. 55
Sold-to BP ...................................................................................................................................... 55
Transaction Currency .................................................................................................................... 57
Transaction Unit ............................................................................................................................. 58
Warehouse ..................................................................................................................................... 58
Chapter 4 Job shop domain information .................................................................................... 62
Contents
Infor LN Analytics Foundation for Birst User Guide | 5
Dimensions .................................................................................................................................... 62 Calculation Office .................................................................................................................... 63 Machine ................................................................................................................................... 64 Material .................................................................................................................................... 64 Planner .................................................................................................................................... 64 Production Material .................................................................................................................. 65 Production Material Detail ....................................................................................................... 65 Production Operation ............................................................................................................... 66 Production Operation Detail .................................................................................................... 67 Production Order ..................................................................................................................... 69 Production Order Detail ........................................................................................................... 69 Production Total Cost Detail .................................................................................................... 71 Reject Reason ......................................................................................................................... 71 Shop Floor Planner .................................................................................................................. 71 Task ......................................................................................................................................... 72 Work Center ............................................................................................................................. 73
Facts .............................................................................................................................................. 77 Production Order ..................................................................................................................... 77
Star schema ...................................................................................................................... 77 Dimensions ........................................................................................................................ 78 Measures ........................................................................................................................... 79
Production Operation ............................................................................................................... 82 Star schema ...................................................................................................................... 82 Dimensions ........................................................................................................................ 83 Measures ........................................................................................................................... 84
Production Material .................................................................................................................. 88 Star schema ...................................................................................................................... 88 Dimensions ........................................................................................................................ 89 Measures ........................................................................................................................... 90
Production Total Cost .............................................................................................................. 93 Star schema ...................................................................................................................... 93 Dimensions ........................................................................................................................ 94 Measures ........................................................................................................................... 94
Dashboards and reports ................................................................................................................ 96 Job Shop .................................................................................................................................. 96 Overview .................................................................................................................................. 98 Produced Items Variance Ranking .......................................................................................... 98 Order Punctuality ..................................................................................................................... 99
Contents
6 | Infor LN Analytics Foundation for Birst User Guide
Order Lead Time ................................................................................................................... 100 Reject by Reason .................................................................................................................. 101 Perfect Order by Year ............................................................................................................ 101 Operation Cost Variance ....................................................................................................... 102 Operation Machine and Labor Time ...................................................................................... 103 Material Cost .......................................................................................................................... 104
Infor LN Analytics Foundation for Birst User Guide | 7
About this guide
This guide contains information on how to use Infor LN Analytics in your day-to-day business.
Intended audience This guide is for the day-to-day or end users of the Infor LN Analytics content.
Related documents You can find the documents in the product documentation section of the Infor Support Portal, as described in "Contacting Infor" on page 7, or through the landing page that comes with LN Analytics:
• Infor LN Analytics for Birst Administration Guide
Contacting Infor If you have questions about Infor products, go to the Infor Support Portal.
If we update this document after the product release, we will post the new version on this website. We recommend that you check this website periodically for updated documentation.
If you have comments about Infor documentation, contact [email protected].
Navigating the dashboard
Infor LN Analytics Foundation for Birst User Guide | 8
Chapter 1 Navigating the dashboard
Click the dashboard drop-down list to navigate between dashboard collections and dashboards. This table shows the icons that are shown:
Button Name Description
Using the toolbar This table shows the toolbar icons:
Filters Shows the standard filter
Reset Reloads the dashboard with the default filters
Maximize Expands a report or a KPI
chart to fill the screen
Minimize Restores a report or a KPI chart to its original size and shows the dashboard
Dashlet actions Shows actions such as
Explore in Visualizer, View Selector, Column Selector, Export As, and Notifications, depending on how the report or the KPI chart is set up
Button Name Description
Copy Link Copies the Bookmark URL of Dashboard.
Navigating the dashboard
Infor LN Analytics Foundation for Birst User Guide | 9
Viewing data You can view data in a report or a KPI chart by using any of these actions:
Hovering Hover over charts to see more detailed information in a popup. If you are using filters, you can hover over the Filter card to show more information.
Reports Select a dashboard from different collection folder.
Notifications Notification Center.
Export Exports reports to PDF or PDF with Details (includes collection name, widget name, timestamp, filters applied to widget.
Logs Shows Log History (Timestamp, Source, Runtime, Cache Hit, Details of queries and events).
Bookmark Save your selection using the bookmark button so you can easily use that selection the next time you log in.
Filter Use to modify the value of the dimensions used to calculate the report values.
Reset Refresh the reports or dashboard to its original state.
Navigating the dashboard
10 | Infor LN Analytics Foundation for Birst User Guide
Changing report types If this function is enabled for a report, you can change the visualization types by selecting Dashlet Actions > View Selector.
The View Selector option shows only the charts that closely match the data, depending on how the report is set up. The Table view is a convenient way to display the data in a columnar or row format.
Turning the data series in a chart on or off Some charts have legend icons, which are colored buttons that are located below or to the right of a chart. You can click any of these icons to turn on or off a data series in a chart. This is useful if you want to focus on just one series and avoid data clutter.
Drilling down data Click on charts to drill down to detail levels. For dashboards where drilling down is allowed, the drill path is displayed in a breadcrumb when you drill down to other levels. You can click on the breadcrumb sections to navigate back to the previous levels, or click Original to go back to the start. You can hide this view by clicking Hide Drill Paths.
Visual highlighting and filtering Use visual highlighting to quickly investigate the relationship between data that is spread across multiple dashlets. Hold CTRL (for Windows) or CMD (for MAC) and drag an area (points, bars, pie, etc) onto a dashlet. When you apply visual highlighting, the related data points in other dashlets also light up. Filters are not applied in visual highlighting.
To filter on a specific area and display related data points in other dashlets, right-click an area and select Visual Filtering. The Filter card shows the filter used for that area.
Selecting attributes or measures You can select attributes or measures to be displayed in a chart by using filters, column selectors, or by changing the sorting of a rank.
Navigating the dashboard
Infor LN Analytics Foundation for Birst User Guide | 11
Using filters Dashboards can have standard or embedded filters that let you explore subsets of data. The filters available depend on how the dashboard is set up.
Using the standard filter Click the Filters button and perform any of these actions:
• Select the filters and click Apply. For example, in the Fiscal Year filter, select the year that you want to filter. Some filters allow multi selection, while others allow only one selection.
• For filter groups with a hierarchical order, for example Fiscal Period, select a filter and then select the values to be filtered.
• If there are many filter values, you can search on them to narrow down your selection. • To select all attributes, select the Select All check box. Clear the check box to remove the
selection. • To display only the filters that you selected, click the Show selected options only icon.
After you click Apply, the Filter cards show the filters that you selected. These Filter cards are displayed along the top of the dashboard.
Using the Filter cards When you access a dashboard, the Filter cards show the default filters for that dashboard. Hover over a Filter card to see the name of the filter and its current filter values, or click a Filter card to show the standard filter with the filtered attributes.
To clear the filter, click the x icon of the first Filter card.
Using the embedded filters Ad hoc dashboards use embedded filters on a page. Embedded filters let you see the filters and change them. The Filter cards for embedded filters work the same as for standard filters. If there are a lot of values displayed, use the search bar to find a value.
Changing sorting in ranking Some tables and crosstab reports have a Sort option. Hover over the header label on either axis to see and click the Sort icon. Click the icon to change the sort order, or click again to set it back to the original order.
Navigating the dashboard
12 | Infor LN Analytics Foundation for Birst User Guide
To change the sort order of charts, select Dashlet Actions > View Selector, select the table or crosstab, then perform the sorting change. Once done, you can switch back to the original chart type to show the report with the updated sorting.
Using the column selector If the column selector is enabled for a report, you can use it to choose what attributes or measures to show. Select Dashlet Actions > Column Selector.
Alternative attributes or measures are displayed in the Column Selector list. If you select a different attribute or measure, the report is updated with the new data.
Note: If you change the measure for charts with ranking, the new measure is sorted by the default value (the initial load value).
Analytics overview
Infor LN Analytics Foundation for Birst User Guide | 13
Chapter 2 Analytics overview
About LN Analytics LN Analytics refers to the content built with Birst. LN Analytics provides users with strategic and tactical business intelligence by generating measures for analytic data or reports.
Key Performance Indicators (KPIs) provide future-oriented measures, which direct you to critical areas of business performance that need improvement.
Analytics components This topic describes the basic components: dimensions, facts, reports and dashboards.
LN Analytics provides reports that display a trend for a single KPI, and reports that allow the user to analyze one or several metrics in a chart or a table. Reports that show a trend for a single KPI are referred to as KPI charts and are designed to be used with a dark background. Reports are named according to the displayed KPI and display a trend over a month or other period.
LN Analytics uses Birst column selectors for attributes and measures to add flexibility and additional options for analysis.
LN Analytics provides you with a set of standard reports and dashboards, but you can create your own.
The facts (measures) and associated dimensions (attributes) described in this document can be used in Visualizer and Report Designer to create reports.
Dimensions Dimension attributes provide ways of grouping and filtering measures targeted from facts.
Analytics overview
14 | Infor LN Analytics Foundation for Birst User Guide
Addresses Dimensions with address details all include the same attributes.
This table shows the tables from which address fields are retrieved for the dimension:
Table Description
tccom130 Addresses
tccom139 Cities by Country
tcemm100 Time Zones
tcmcs010 Countries
tcmcs143 States/Provinces
This table shows the attribute mapping for the dimension:
Attribute Mapping
City tccom130.ccit
City Desc tccom139.dsca
Country tccom130.ccty
Country Desc tcmcs010.dsca
EU Member State tcmcs010.meec
GPS Latitude tccom130.glat
GPS Location Geo attribute combining GPS Latitude and GPS Longitude. Includes tooltip with Desc/Name.
GPS Longitude tccom130.glon
ISO Country Code Alpha-2 tcmcs010.ict2
State/Province tccom130.cste
State/Province Desc tcmcs143.dsca
Time Zone tcemm100.timz
Time Zone Code tccom130.tzid
Time Zone Desc tcemm100.dsca
Analytics overview
Infor LN Analytics Foundation for Birst User Guide | 15
Customer Defined Fields This table shows the customer defined fields available for all dimensions. Further details on configuration and usage can be found in the Infor LN Analytics for Birst Administration Guide.
Attribute Mapping
CDF Date01 Date Field 1
CDF Date02 Date Field 2
CDF Date03 Date Field 3
CDF Date04 Date Field 4
CDF Date05 Date Field 5
CDF DateTime01 Date Time Field 1
CDF DateTime02 Date Time Field 2
CDF DateTime03 Date Time Field 3
CDF DateTime04 Date Time Field 4
CDF DateTime05 Date Time Field 5
CDF Float01 Float Field 1
CDF Float02 Float Field 2
CDF Float03 Float Field 3
CDF Float04 Float Field 4
CDF Float05 Float Field 5
CDF Integer01 Integer Field 1
CDF Integer02 Integer Field 2
CDF Integer03 Integer Field 3
CDF Integer04 Integer Field 4
CDF Integer05 Integer Field 5
CDF String01 String Field 1
CDF String02 String Field 2
CDF String03 String Field 3
CDF String04 String Field 4
CDF String05 String Field 5
CDF String06 String Field 6
CDF String07 String Field 7
Analytics overview
16 | Infor LN Analytics Foundation for Birst User Guide
Attribute Mapping
CDF String08 String Field 8
CDF String09 String Field 9
CDF String10 String Field 10
CDF String11 String Field 11
CDF String12 String Field 12
CDF String13 String Field 13
CDF String14 String Field 14
CDF String15 String Field 15
Enumerates LN defines fields of data type Enumerate through these fields:
• Constant: Number that determines the sequence in which the enum descriptions are displayed. Used for sorting in Birst.
• Constant Name: Used to refer to an enumerated constant in scripts or expressions on forms and reports in LN. Used for filtering in Birst.
• Description: Used for display purposes
For example, Order Status (tisfc001.osta) is an enumerate with possible values:
Constant Constant Name Description
20 planned Created
30 modify Modify
40 scheduled Scheduled
50 printed Printed
60 in.prod Released
70 active Active
80 to.be.completed Production Completed
90 completed Completed
Analytics overview
Infor LN Analytics Foundation for Birst User Guide | 17
Constant Constant Name Description
100 closed Closed
110 archived Archived
Dimensions also contain three fields for each enumerate field, for example:
• Order Status Sort - mapped to Constant
• Order Status Filter - mapped to Constant Name
• Order Status - mapped to Description
Time Time dimension comes with Birst and is described in more detail in the Birst documentation and online help.
This table shows the attributes for the Time dimension:
Attribute
Date
Day
Day Number
Day Seq Number
Day of Month
Day of Week
Day of Week in Month
Day of Year
Days Ago
Month
Month Number
Month Seq Number
Month of Year
Months Ago
Num Weeks In Month
Analytics overview
18 | Infor LN Analytics Foundation for Birst User Guide
Attribute
Quarter
Quarter Number
Quarter Seq Number
Trailing 3 Month Name
Week End Date
Week Number
Week Seq Number
Week Start Date
Week of Month
Week of Year
Weeks Ago
Year
Year Seq Number
Year/Month
Year/Quarter
UTC dates UTC dates that are not registered in LN are displayed as empty strings in LN sessions. But the UTC date in LN tables is 0. Birst represents such UTC dates as 1970-01-01 00:00:00.
Deletions If a record is deleted in LN, a record with deleted = 1 is stored in the dimension. Records are never removed from dimensions because historic transactions or other dimensions with references can still exist in the data warehouse.
Degenerate dimension (transaction ID) records are hidden depending on the transaction status.
Examples:
• An order that is planned and deleted in LN, will be hidden in the degenerate dimension. An order that is closed and deleted in LN will not be hidden and remains available for analysis.
Analytics overview
Infor LN Analytics Foundation for Birst User Guide | 19
• An operation that is not yet completed and is deleted in LN, will be hidden in the degenerate dimension in Birst. Completed operations that are deleted (when archiving orders) will not be hidden and remain available for analysis.
Facts There are fact tables with measures and targeted dimensions.
Amounts and currencies Amount measures are available in 5 currency types. LN stores amounts in the 3 home currencies or in the transaction currency. These table fields are automatically published in the IMS messages. Calculated fields are available to always publish amounts in home currencies (local, reporting 1 and reporting 2), reference currency, and data warehouse currency.
This naming convention is used:
• LC = Local currency
• RC1 = Reporting Currency 1
• RC2 = Reporting Currency 1
• RFC = Reference currency
• DWC = Data warehouse currency
Home currencies and reference currencies are defined in the Companies (tcemm1170m000) session. Data warehouse currencies are defined in the Data Warehouse Parameters (tcgen0100m000) session. These currencies are available in the Company dimension.
Amount facts are semi-additive (SA). That is, they cannot always be summed across companies.
Note: Amounts can be summed safely for a single company. Amounts can only be summed across companies if they have the same currency.
We make these recommendations:
• Data warehouse parameter setup should be such that all companies use the same currency and then amounts in data warehouse currency can be safely summed across all companies.
• Reference currency is typically also kept the same across companies and then amounts in reference currency can be summed across those companies.
• You should not sum amounts in, for example, Reporting Currency 1 across companies when these companies have a different Reporting Currency 1. Amounts in different currencies would be summed.
Analytics overview
20 | Infor LN Analytics Foundation for Birst User Guide
Quantities and units Quantity measures are available in eight unit types.
Calculated fields are available to publish:
• Quantities in transaction unit for LN tables that only store quantities in inventory unit.
• Quantities in inventory unit for LN tables that only store quantities in transaction unit.
• Quantities in six base units for all LN tables in our data sets.
This naming convention is used:
• TU = Transaction Unit *
• IU = Inventory Unit
• BUW = Base Unit Weight
• BUL = Base Unit Length
• BUA = Base Unit Area
• BUV = Base Unit Volume
• BUT = Base Unit Time
• BUP = Base Unit Piece
* Job shop only uses inventory units.
Inventory units are defined in the Items (tcibd0501m000) session.
Base units for weight, length, area, volume and time are defined in the MCS Parameters (tcmcs0500m000) session. Base unit for piece is defined in the Data Warehouse Parameters (tcgen0100100) session. These base units are available in the Company dimension.
Quantity measures are semi-additive (SA). That is (in inventory unit) they cannot be summed across their non-additive Item dimension. Note: Quantities can be summed safely for a single item and can be summed across items but only if they have the same inventory unit.
We make these recommendations:
• MCS parameters and data warehouse parameter setup should be such that all companies use the same base units and then quantities in base units can be safely summed across items and companies.
• You should not sum quantities in inventory unit (or transaction unit) across items/companies without setting a filter on the inventory unit (or transaction unit). Without filter, quantities in different units would be summed.
Analytics overview
Infor LN Analytics Foundation for Birst User Guide | 21
Deletes When a record is deleted in LN, a record with deleted = 1 is stored in the fact table in Birst. However, facts are hidden depending on the transaction status. For example: an order that is planned and deleted in LN, is hidden in the fact table. An order that is closed and deleted in LN is not hidden in the fact table and remains available for analysis.
Reports LN Analytics provides reports that display a trend for a single KPI, and reports that allow the user to analyze one or several metrics in a chart or a table. Reports that show a trend for a single KPI are referred to as KPI charts and are designed to be used with a dark background. Reports are named according to the displayed KPI and display a trend over a month or other period.
LN Analytics uses Birst column selectors for attributes and measures to add flexibility and additional options for analysis.
Dashboards Dashboards provide a single view of several KPIs that are relevant to a specific business process. They present varied information such as summaries, key trends, comparisons, and exceptions through charts, and tables with metrics.
Dashboards are built from a number of dashlets. A dashlet can be a KPI object, a KPI chart, or any other type of report. A KPI object is usually enhanced with a KPI chart. They are placed together on a dashboard to give the impression of a single object. Color is used to emphasize and group different KPIs together.
Each dashboard is delivered with a set of filters that enables you to drill in to the data presented in the various reports on the dashboard. Filters based on conformed dimensions are shared across dashboards.
LN Analytics comes with a landing page with following dashlets:
• Report ‘About‘ with the content version (10.6.001 or later).
• Text Area ‘About LN Analytics’ with an introduction text.
• Buttons to the Foundation User Guide, Administration Guide and Infor LN Help, all navigate to docs.infor.com. Infor LN Help also lists both guides in the Documentation/Analytics/Foundation section.
Conformed dimensions
22 | Infor LN Analytics Foundation for Birst User Guide
Chapter 3 Conformed dimensions
Conformed dimensions are dimensions that are used across domains.
This chapter describes these conformed dimensions:
Conformed dimension Address
Buy-from BP
Calendar Period
Company
Cost Component
Department
Employee
Invoice-to BP
Item
Pay-by BP
PCS Project
Product Variant
Project
Reason
Return Reason
Ship-to Address
Ship-to BP
Site
Sold-to Address
Sold-to BP
Transaction Currency
Transaction Unit
Conformed dimensions
Infor LN Analytics Foundation for Birst User Guide | 23
Conformed dimension
Warehouse
This table shows the drill maps available for all reports that include mentioned columns:
Dimension Drill columns
Company Country – State/Province – City
Invoice-to BP Country – State/Province – City
Business Partner Type – Invoice-to BP
Financial Customer Group – Invoice-to BP
Item Item Group – Item
Product Type – Item
Product Line – Item
Product Class – Item
Ship-to Address Country – State/Province – City
Ship-to BP Country – State/Province – City
Business Partner Type – Invoice-to BP
Site Country – State/Province – City
Sold-to Address Country – State/Province – City
Time Year – Quarter – Month – Week – Day
Warehouse Country – State/Province – City
Logistic Company – Enterprise Unit – Work Center
Address This table shows the tables from which fields are retrieved for the dimension:
Table Description
tccom130 Addresses
tccom139 Cities by Country
tcemm100 Time Zones
Conformed dimensions
24 | Infor LN Analytics Foundation for Birst User Guide
Table Description
tcmcs010 Countries
tcmcs143 States/Provinces
This table shows the attribute mapping for the dimension:
Attribute Mapping
Address Name tccom130.nama
Address tccom130.cadr
City tccom130.ccit
City 2 tccom130.namf
City Desc tccom139.dsca
Country tccom130.ccty
Country Desc tcmcs010.dsca
EU Member State tcmcs010.meec
EU Member State Filter tcmcs010.meec
EU Member State Sort tcmcs010.meec
Fax tccom130.tefx
GPS Latitude tccom130.glat
GPS Location
Geo attribute combining GPS Latitude and GPS Longitude. Includes tooltip with Ship-to Address Name.
GPS Longitude tccom130.glon
ISO Country Code Alpha-2 tcmcs010.ict2
State Province Desc tcmcs143.dsca
State/Province tccom130.cste
Telephone tccom130.telp
Telex tccom130.telx
Time Zone tcemm100.timz
Time Zone Code tccom130.tzid
Time Zone Desc tcemm100.dsca
deleted 1 if deleted in LN else 0
Customer Defined Fields Standard list of fields
Conformed dimensions
Infor LN Analytics Foundation for Birst User Guide | 25
Buy-from BP This table shows the tables from which fields are retrieved for the dimension:
Table Description
tccom100 Business Partners
tccom120 Buy-from Business Partners
tccom130 Addresses
tccom139 Cities by Country
tcemm100 Time Zones
tcibd301 List Groups
tcmcs010 Countries
tcmcs029 Business Partner Types
tcmcs031 Lines of Business
tcmcs045 Areas
tcmcs065 Departments
tcmcs143 States/Provinces
This table shows the attribute mapping for the dimension:
Attribute Mapping
Area tccom120.creg
Area Desc tcmcs045.dsca
Business Partner Status tccom120.bpst
Business Partner Status Filter tccom120.bpst
Business Partner Status Sort tccom120.bpst
Business Partner Type tccom120.cbtp
Business Partner Type Desc tcmcs029.dsca
Buy from BP Name tccom100.nama
Buy-from BP tccom120.otbp
City tccom130.ccit
City Desc tccom139.dsca
Country tccom130.ccty
Conformed dimensions
26 | Infor LN Analytics Foundation for Birst User Guide
Attribute Mapping
Country Desc tcmcs010.dsca
EU Member State tcmcs010.meec
EU Member State Filter tcmcs010.meec
EU Member State Sort tcmcs010.meec
End Date tccom120.endt
GPS Latitude tccom130.glat
GPS Location
Geo attribute combining GPS Latitude and GPS Longitude. Includes tooltip with Buy-from BP Name.
GPS Longitude tccom130.glon
ISO Country Code Alpha-2 tcmcs010.ict2
Line of Business tccom120.cbrn
Line of Business Desc tcmcs031.dsca
List Group tccom120.clgr
List Group Desc tcibd301.dsca
Purchase Office tccom120.cofc
Purchase Office Desc tcmcs065.dsca
Start Date tccom120.stdt
State Province Desc tcmcs143.dsca
State/Province tccom130.cste
Time Zone tcemm100.timz
Time Zone Code tccom130.tzid
Time Zone Desc tcemm100.dsca
deleted 1 if deleted in LN else 0
Customer Defined Fields Standard list of fields
Address fields are included for tccom120.cadr.
Calendar Period This table shows the table from which fields are retrieved for the dimension:
Conformed dimensions
Infor LN Analytics Foundation for Birst User Guide | 27
Table Description
tcccp060 Period Tables
tcccp070 Periods
This table shows the attribute mapping for the dimension:
Attribute Mapping
Calendar Period Desc tcccp060.dsca
End Date tcccp070.endt
Period Desc tcccp070.dsca
Period Number tcccp070.peri
Period Table Code tcccp070.cpdt
Start Date tcccp070.stdt
Year tcccp070.yrno
Year Period tcccp070.yrno and tcccp070.peri
deleted 1 if deleted in LN else 0
Customer Defined Fields Standard list of fields
Company Tools company 0000 is excluded from the company dimension.
This table shows the tables from which fields are retrieved for the dimension:
Table Description
tccom000 Implemented Software Components (Companies)
tccom130 Addresses
tccom139 Cities by Country
tcemm100 Time Zones
tcemm170 Companies
tcgen000 Generic Parameters
tcmcs000 MCS Parameters
tcmcs001 Units
Conformed dimensions
28 | Infor LN Analytics Foundation for Birst User Guide
Table Description
tcmcs002 Currencies
tcmcs010 Countries
tcmcs143 States/Provinces
tfgld004 Financial Companies
This table shows the attribute mapping for the dimension:
Attribute Mapping
Base Unit Area tcmcs000.care
Base Unit Area Desc tcmcs001.dsca
Base Unit Length tcmcs000.clen
Base Unit Length Desc tcmcs001.dsca
Base Unit Piece tcgen000.cpie
Base Unit Piece Desc tcmcs001.dsca
Base Unit Time tcmcs000.ctim
Base Unit Time Desc tcmcs001.dsca
Base Unit Volume tcmcs000.cvol
Base Unit Volume Desc tcmcs001.dsca
Base Unit Weight tcmcs000.cwei
Base Unit Weight Desc tcmcs001.dsca
City tccom130.ccit
City Desc tccom139.dsca
Company tccom000.ncmp
Company Desc tcemm170.desc
Company Type tcemm170.ctyp
Company Type Filter tcemm170.ctyp
Company Type Sort tcemm170.ctyp
Country tccom130.ccty
Country Desc tcmcs010.dsca
Data Warehouse Currency tcgen000.dcur
Data Warehouse Currency Desc tcmcs002.dsca
Conformed dimensions
Infor LN Analytics Foundation for Birst User Guide | 29
Attribute Mapping
EU Member State tcmcs010.meec
EU Member State Filter tcmcs010.meec
EU Member State Sort tcmcs010.meec
GPS Latitude tccom130.glat
GPS Location Geo attribute combining GPS Latitude and GPS Longitude. Includes tooltip with Company Desc
GPS Longitude tccom130.glon
Group Company tfgld004.gcmp
ISO Country Code Alpha-2 tcmcs010.ict2
Job Shop by Site tccom000.jspm
Job Shop by Site Filter tccom000.jspm
Job Shop by Site Sort tccom000.jspm
Local Currency tcemm170.fcua
Local Currency Desc tcmcs002.dsca
Reference Currency tcemm170.lcur
Reference Currency Desc tcmcs002.dsca
Reporting Currency 1 tcemm170.fcub
Reporting Currency 1 Desc tcmcs002.dsca
Reporting Currency 2 tcemm170.fcuc
Reporting Currency 2 Desc tcmcs002.dsca
State Province Desc tcmcs143.dsca
State/Province tccom130.cste
Time Zone tcemm100.timz
Time Zone Code tccom130.tzid
Time Zone Desc tcemm100.dsca
deleted 1 if deleted in LN else 0
Customer Defined Fields Standard list of fields
Address fields are included for tccom000.cadr.
Conformed dimensions
30 | Infor LN Analytics Foundation for Birst User Guide
Cost Component This table shows the table from which fields are retrieved for the dimension:
Table Description
tcmcs048 Cost Components
This table shows the attribute mapping for the dimension:
Attribute Mapping
Cost Component tcmcs048.cpcp
Cost Component Desc tcmcs048.dsca
Cost Component Type tcmcs048.cpus
Cost Component Type Filter tcmcs048.cpus
Cost Component Type Sort tcmcs048.cpus
Cost Subtype tcmcs048.tpoc
Cost Subtype Filter tcmcs048.tpoc
Cost Subtype Sort tcmcs048.tpoc
Cost Type tcmcs048.cref
Cost Type Filter tcmcs048.cref
Cost Type Sort tcmcs048.cref
Direct Indirect tcmcs048.dinc
Direct/Indirect Filter tcmcs048.dinc
Direct/Indirect Sort tcmcs048.dinc
Fixed Variable tcmcs048.fxvc
Fixed/Variable Filter tcmcs048.fxvc
Fixed/Variable Sort tcmcs048.fxvc
Included in Inventory Valuation tcmcs048.yesno
Included in Inventory Valuation Filter tcmcs048.yesno
Included in Inventory Valuation Sort tcmcs048.yesno
deleted 1 if deleted in LN else 0
Customer Defined Fields Standard list of fields
Conformed dimensions
Infor LN Analytics Foundation for Birst User Guide | 31
Department This table shows the tables from which fields are retrieved for the dimension:
Table Description
tccom001 Employees - General
tccom130 Addresses
tccom139 Cities by Country
tcemm030 Enterprise Units
tcemm050 Sites
tcemm100 Time Zones
tcemm170 Companies
tcmcs010 Countries
tcmcs065 Departments
tcmcs143 States/Provinces
This table shows the attribute mapping for the dimension:
Attribute Mapping
City tccom130.ccit
City Desc tccom139.dsca
Country tccom130.ccty
Country Desc tcmcs010.dsca
Department tcmcs065.cwoc
Department Desc tcmcs065.dsca
Department Type tcmcs065.typd
Department Type Filter tcmcs065.typd
Department Type Sort tcmcs065.typd
EU Member State tcmcs010.meec
EU Member State Filter tcmcs010.meec
EU Member State Sort tcmcs010.meec
Enterprise Unit tcemm030.eunt
Enterprise Unit Desc tcemm030.dsca
Conformed dimensions
32 | Infor LN Analytics Foundation for Birst User Guide
Attribute Mapping
Financial Company tcmcs065.comp
Financial Company Desc tcemm170.desc
GPS Latitude tccom130.glat
GPS Location Geo attribute combining GPS Latitude and GPS Longitude. Includes tooltip with Department Desc.
GPS Longitude tccom130.glon
ISO Country Code Alpha-2 tcmcs010.ict2
Logistic Company tcemm030.lcmp
Logistic Company Desc tcemm170.desc
Manager tcmcs065.emno
Manager Name tccom001.nama
Site tcmcs065.site
Site Desc tcemm050.desc
State Province Desc tcmcs143.dsca
State/Province tccom130.cste
Time Zone tcemm100.timz
Time Zone Code tccom130.tzid
Time Zone Desc tcemm100.dsca
deleted
Customer Defined Fields Standard list of fields
Address fields are included for tcmcs065.cadr.
Employee This table shows the tables from which fields are retrieved for the dimension:
Table Description
bpmdm001 Employee People Data
tccom001 Employees - General
tccom130 Addresses
Conformed dimensions
Infor LN Analytics Foundation for Birst User Guide | 33
Table Description
tccom139 Cities by Country
tcemm100 Time Zones
tcmcs010 Countries
tcmcs048 Cost Components
tcmcs065 Departments
tcmcs143 States/Provinces
tcppl090 Labor Rate Codes
This table shows the attribute mapping for the dimension:
Attribute Mapping
Calendar Code tccom001.ccal
City tccom130.ccit
City Desc tccom139.dsca
Civil Status bpmdm001.cist
Contract End Date bpmdm001.cedt
Cost Component tccom001.cpcp
Cost Component Desc tcmcs048.dsca
Country tccom130.ccty
Country Desc tcmcs010.dsca
Country of Nationality bpmdm001.ccty
Country of Nationality Desc tcmcs010.dsca
Date of Birth bpmdm001.daob
Department tccom001.cwoc
Department Desc tcmcs065.dsca
EU Member State tcmcs010.meec
EU Member State Filter tcmcs010.meec
EU Member State Sort tcmcs010.meec
Email bpmdm001.mail
Employee tccom001.emno
Employee Name tccom001.nama
Conformed dimensions
34 | Infor LN Analytics Foundation for Birst User Guide
Attribute Mapping
Employee Type bpmdm001.emtp
Employee Type Filter bpmdm001.emtp
Employee Type Sort bpmdm001.emtp
Employment bpmdm001.hwem
Fax bpmdm001.tefw
First Date of Employment bpmdm001.sdte
GPS Latitude tccom130.glat
GPS Location Geo attribute combining GPS Latitude and GPS Longitude. Includes tooltip with Employee Name
GPS Longitude tccom130.glon
Gender bpmdm001.sexe
Gender Filter bpmdm001.sexe
Gender Sort bpmdm001.sexe
Given Name tccom001.namb
ISO Country Code Alpha-2 tcmcs010.ict2
Job Title bpmdm001.jobt
Labor Rate Code tccom001.clrt
Labor Rate Code Desc tcppl090.desc
Language tccom001.clan
Last Date of Employment bpmdm001.edte
Last Name tccom001.namd
Messenger Address bpmdm001.msad
Messenger Type bpmdm001.msty
Messenger Type Filter bpmdm001.msty
Messenger Type Sort bpmdm001.msty
Middle Name tccom001.namc
Mobile Phone bpmdm001.telm
Search Key tccom001.seak
State Province Desc tcmcs143.dsca
State/Province tccom130.cste
Conformed dimensions
Infor LN Analytics Foundation for Birst User Guide | 35
Attribute Mapping
Telephone bpmdm001.telw
Telephone 2 bpmdm001.tlw1
Time Zone tcemm100.timz
Time Zone Code tccom130.tzid
Time Zone Desc tcemm100.dsca
Type of Employment Contract bpmdm001.tctr
deleted 1 if deleted in LN else 0
Customer Defined Fields Standard list of fields
Address fields are included for bpmdm001.cadr.
Invoice-to BP This table shows the tables from which fields are retrieved for the dimension:
Table Description
tccom100 Business Partners
tccom112 Invoice-to Business Partners
tccom130 Addresses
tccom139 Cities by Country
tcemm100 Time Zones
tcmcs002 Currencies
tcmcs010 Countries
tcmcs013 Payment Terms
tcmcs029 Business Partner Types
tcmcs064 Credit Ratings
tcmcs143 States/Provinces
tfacr001 Financial Customer Groups
This table shows the attribute mapping for the dimension:
Conformed dimensions
36 | Infor LN Analytics Foundation for Birst User Guide
Attribute Mapping
Business Partner Status tccom112.itst
Business Partner Status Filter tccom112.itst
Business Partner Status Sort tccom112.itst
Business Partner Type tccom112.cbtp
Business Partner Type Desc tcmcs029.dsca
City tccom130.ccit
City Desc tccom139.dsca
Country tccom130.ccty
Country Desc tcmcs010.dsca
Credit Limit tccom112.crlr
Credit Rating tccom112.crat
Credit Rating Desc tcmcs064.dsca
Currency tccom112.ccur
Currency Desc tcmcs002.dsca
EU Member State tcmcs010.meec
EU Member State Filter tcmcs010.meec
EU Member State Sort tcmcs010.meec
End Date tccom112.endt
Financial Customer Group tccom112.cfcg
Financial Customer Group Desc tfacr001.desc
GPS Latitude tccom130.glat
GPS Location
Geo attribute combining GPS Latitude and GPS Longitude. Includes tooltip with Invoice-to BP Name.
GPS Longitude tccom130.glon
ISO Country Code Alpha-2 tcmcs010.ict2
Invoice to BP Name tccom100.nama
Invoice-to BP tccom112.itbp
Payment Terms tccom112.cpay
Payment Terms Desc tcmcs013.dsca
Start Date tccom112.stdt
Conformed dimensions
Infor LN Analytics Foundation for Birst User Guide | 37
Attribute Mapping
State Province Desc tcmcs143.dsca
State/Province tccom130.cste
Time Zone tcemm100.timz
Time Zone Code tccom130.tzid
Time Zone Desc tcemm100.dsca
deleted 1 if deleted in LN else 0
Customer Defined Fields Standard list of fields
Address fields are included for tccom112.cadr.
Item This table shows the tables from which fields are retrieved for the dimension:
Table Description
tcibd001 Items
tcmcs001 Units
tcmcs015 Product Types
tcmcs023 Item Groups
tcmcs028 Harmonized System Codes
tcmcs052 Projects
tcmcs060 Manufacturers
tcmcs061 Product Lines
tcmcs062 Product Classes
tcmcs145 Routing Groups
tiipd001 Item - Production
tipcf500 Product Variant IDs
tppdm005 Item Project Data
This table shows the attribute mapping for the dimension:
Conformed dimensions
38 | Infor LN Analytics Foundation for Birst User Guide
Attribute Mapping
Configurable tcibd001.cnfg
Configurable Filter tcibd001.cnfg
Configurable Sort tcibd001.cnfg
Control Code tppdm005.ccit
Control Code Desc tcibd001.desc
Customize tcibd001.opol
Customize Filter tcibd001.opol
Customize Sort tcibd001.opol
Customizable tcibd001.cust (aka Customized)
Customizable Filter tcibd001.cust (aka Customized)
Customizable Sort tcibd001.cust (aka Customized)
Default Supply Source tcibd001.srce
Default Supply Source Filter tcibd001.srce
Default Supply Source Sort tcibd001.srce
Derived from Item Desc tcibd001.dsca
Derived-from Item tcibd001.dfit
Harmonized System Code tcibd001.ccde
Harmonized System Code Desc tcmcs028.dsca
Inventory Unit tcibd001.cuni
Inventory Unit Desc tcmcs001.dsca
Item tcibd001.item
Item Desc tcibd001.dsca
Item Group tcibd001.citg
Item Group Desc tcmcs023.dsca
Item Type tcibd001.kitm
Item Type Filter tcibd001.kitm
Item Type Sort tcibd001.kitm
Manufacturer tcibd001.cmnf
Manufacturer Desc tcmcs060.dsca
Material Info tcibd001.dscb
Conformed dimensions
Infor LN Analytics Foundation for Birst User Guide | 39
Attribute Mapping
Option Set tcibd001.opts
Order System tcibd001.osys
Order System Filter tcibd001.osys
Order System Sort tcibd001.osys
Phantom tiipd001.cpha
Phantom Filter tiipd001.cpha
Phantom Sort tiipd001.cpha
Product Class tcibd001.cpcl
Product Class Desc tcmcs062.dsca
Product Line tcibd001.cpln
Product Line Desc tcmcs061.dsca
Product Type tcibd001.ctyp
Product Type Desc tcmcs015.dsca
Product Variant tcibd001.cpva
Product Variant Desc tipcf500.dsca
Project tcibd001.cprj
Project Desc tcmcs052.dsca
Project Order System tppdm005.osys
Project Order System Filter tppdm005.osys
Project Order System Sort tppdm005.osys
Reference Type tipcf500.reft
Reference Type Filter tipcf500.reft
Reference Type Sort tipcf500.reft
Routing Group tiipd001.rgrp
Routing Group Desc tcmcs145.dsca
Size Info tcibd001.dscc
Standard Info tcibd001.dscd
Standard To Order tcibd001.stoi
Standard To Order Filter tcibd001.stoi
Standard To Order Sort tcibd001.stoi
Conformed dimensions
40 | Infor LN Analytics Foundation for Birst User Guide
Attribute Mapping
Subassembly tcibd001.sayn
Subassembly Filter tcibd001.sayn
Subassembly Sort tcibd001.sayn
Weight tcibd001.wght
Weight Unit tcibd001.cwun
Weight Unit Desc tcibd001.wpcs
With PCS tcibd001.sayn
With PCS Filter tcibd001.sayn
With PCS Sort tcibd001.sayn
deleted 1 if deleted in LN else 0
Customer Defined Fields Standard list of fields
Pay-by BP This table shows the tables from which fields are retrieved for the dimension:
Table Description
tccom100 Business Partners
tccom114 Pay-by Business Partners
tccom130 Addresses
tccom139 Cities by Country
tcemm100 Time Zones
tcmcs002 Currencies
tcmcs010 Countries
tcmcs029 Business Partner Types
tcmcs143 States/Provinces
This table shows the attribute mapping for the dimension:
Attribute Mapping
Business Partner Status tccom114.bpst
Conformed dimensions
Infor LN Analytics Foundation for Birst User Guide | 41
Attribute Mapping
Business Partner Status Filter tccom114.bpst
Business Partner Status Sort tccom114.bpst
Business Partner Type tccom114.cbtp
Business Partner Type Desc tcmcs029.dsca
City tccom130.ccit
City Desc tccom139.dsca
Country tccom130.ccty
Country Desc tcmcs010.dsca
Currency tccom114.ccur
Currency Desc tcmcs002.dsca
EU Member State tcmcs010.meec
EU Member State Filter tcmcs010.meec
EU Member State Sort tcmcs010.meec
End Date tccom114.endt
GPS Latitude tccom130.glat
GPS Location Geo attribute combining GPS Latitude and GPS Longitude. Includes tooltip with Pay-by BP Name.
GPS Longitude tccom130.glon
ISO Country Code Alpha-2 tcmcs010.ict2
Pay by BP Name tccom100.nama
Pay-by BP tccom114.pfbp
Start Date tccom114.stdt
State Province Desc tcmcs143.dsca
State/Province tccom130.cste
Time Zone tcemm100.timz
Time Zone Code tccom130.tzid
Time Zone Desc tcemm100.dsca
deleted 1 if deleted in LN else 0
Customer Defined Fields Standard list of fields
Address fields are included for tccom114.cadr.
Conformed dimensions
42 | Infor LN Analytics Foundation for Birst User Guide
PCS Project This dimension is for PCS Projects.
This table shows the tables from which fields are retrieved for the dimension:
Table Description
tccom001 Employees - General
tcmcs052 Projects
tcmcs065 Departments
tipcs020 General Project Data
tipcs030 Project Details
This table shows the attribute mapping for the dimension:
Attribute Mapping
Actual Closing date tipcs030.cldt
Actual Machine Hours tipcs030.amch
Actual Man Hours tipcs030.aman
Actualization Date tipcs030.acdt
Budget tipcs030.cbdg
Budget Desc tcmcs052.dsca
Calculation Office tipcs020.clco
Calculation Office Desc tcmcs065.dsca
Completion Date tipcs030.ddat
Date Filled by Sales tipcs020.dtfs
Date Filled by Sales Filter tipcs020.dtfs
Date Filled by Sales Sort tipcs020.dtfs
Definitively Closed tipcs030.defc
Definitively Closed Filter tipcs030.defc
Definitively Closed Sort tipcs030.defc
Engineering Allowed tipcs020.peng
Engineering Allowed Filter tipcs020.peng
Engineering Allowed Sort tipcs020.peng
Conformed dimensions
Infor LN Analytics Foundation for Birst User Guide | 43
Attribute Mapping
Estimated Capacity Aggregated tipcs030.ecpa
Estimated Capacity Rough tipcs030.ecpr
In Service tcmcs052.isrv
In-Service Filter tcmcs052.isrv
In-Service Sort tcmcs052.isrv
Investment Project tipcs030.intp
Investment Project Filter tipcs030.intp
Investment Project Sort tipcs030.intp
Invoiced Amount tipcs030.tinv
PCS Project tcmcs052.cprj
Planning Method tipcs030.plcd
Planning Method Filter tipcs030.plcd
Planning Method Sort tipcs030.plcd
Project Desc a tcmcs052.dsca
Project Desc b tcmcs052.dscb
Project Desc c tcmcs052.dscc
Project Desc d tcmcs052.dscd
Project Employee tipcs020.pemp
Project Employee Name tccom001.nama
Project Status tipcs030.psts
Project Status Filter tipcs030.psts
Project Status Sort tipcs030.psts
Project Type tipcs020.kopr
Project Type Filter tipcs020.kopr
Project Type Sort tipcs020.kopr
Reference tipcs020.refe
Reference Date tipcs020.cfdt
Revenue Expected tipcs030.erev
Revenue Expected Filter tipcs030.erev
Revenue Expected Sort tipcs030.erev
Conformed dimensions
44 | Infor LN Analytics Foundation for Birst User Guide
Attribute Mapping
Search Key a tcmcs052.seak
Search Key b tcmcs052.seab
Spent Critical Capacity tipcs030.ascp
Stage of Completion tipcs030.soco
Start Date tipcs030.sdat
deleted 1 if deleted in LN else 0
Customer Defined Fields Standard list of fields
Product Variant This table shows the tables from which fields are retrieved for the dimension:
Table Description
tcibd001 Items
tcmcs002 Currencies
tipcf500 Product Variant
tipcf510 Product Variant Structure
tipcf520 Options by Product Variant
This table shows the attribute mapping for the dimension:
Attribute Mapping
Alternative Sales Quotation tipcf500.altn
Configurable Item tipcf510.item
Configurable Item Desc tcibd001.dsca
Configurable Top Item tipcf500.item
Configurable Top Item Desc tcibd001.dsca
Currency tipcf500.ccur
Currency Desc tcmcs002.dsca
Option tipcf520.copt
Option Desc tipcf520.odsc
Conformed dimensions
Infor LN Analytics Foundation for Birst User Guide | 45
Attribute Mapping
Option Set tipcf510.opts
PCF Level tipcf510.pcfl
Product Configuration Date tipcf500.pcfd
Product Feature tipcf520.cpft
Product Feature Desc tipcf520.dsca
Product Variant tipcf500.cpva
Product Variant Desc tipcf500.dsca
Product Variant Valid tipcf500.vali
Product Variant Valid Filter tipcf500.vali
Product Variant Valid Sort tipcf500.vali
Reference Order tipcf500.refo
Reference Position tipcf500.refp
Reference Type tipcf500.reft
Reference Type Filter tipcf500.reft
Reference Type Sort tipcf500.reft
Sequence Number tipcf520.sern
Variant Sales Price tipcf500.slpr
deleted 1 if deleted in LN else 0
Customer Defined Fields Standard list of fields
Project This dimension is for TP Projects, see PCS Project Dimension for PCS Projects.
This table shows the tables from which fields are retrieved for the dimension:
Table Description
tccom001 Employees - General
tccom130 Addresses
tccom139 Cities by Country
tcemm030 Enterprise Units
Conformed dimensions
46 | Infor LN Analytics Foundation for Birst User Guide
Table Description
tcemm050 Sites
tcemm100 Time Zones
tcemm170 Companies
tcmcs010 Countries
tcmcs045 Areas
tcmcs052 Projects
tcmcs143 States/Provinces
tpctm010 Programs
tppdm055 Business Sectors
tppdm059 Financing Methods
tppdm063 Acquiring Methods
tppdm065 Project Groups
tppdm075 Categories
tppdm085 Phases
tppdm600 Projects
tppss010 Project Plans
This table shows the attribute mapping for the dimension:
Attribute Mapping
Acquiring Method tppdm600.ccam
Acquiring Method Desc tppdm063.desc
Active Plan tppdm600.cpla
Active Plan Desc tppss010.desc
Actual Cost Calculation Code tppdm600.ccal
Budget Top Element tppdm600.cspa
Budget by tppdm600.btpr
Budget by Filter tppdm600.btpr
Budget by Sort tppdm600.btpr
Business Sector tppdm600.csec
Business Sector Desc tppdm055.desc
Conformed dimensions
Infor LN Analytics Foundation for Birst User Guide | 47
Attribute Mapping
Capital Project tppdm600.capp
Capital Project Filter tppdm600.capp
Capital Project Sort tppdm600.capp
Category tppdm600.ccat
Category Desc tppdm075.desc
City tccom130.ccit
City Desc tccom139.dsca
Closing Fiscal Period tppdm600.cfpr
Closing Fiscal Year tppdm600.cfye
Contract Execution tppdm600.coty
Contract Execution Filter tppdm600.coty
Contract Execution Sort tppdm600.coty
Contract Type tppdm600.agty
Contract Type Filter tppdm600.agty
Contract Type Sort tppdm600.agty
Control by tppdm600.btco
Control by Filter tppdm600.btco
Control by Sort tppdm600.btco
Country tccom130.ccty
Country Desc tcmcs010.dsca
Default Activity tppdm600.rsac
EU Member State tcmcs010.meec
EU Member State Filter tcmcs010.meec
EU Member State Sort tcmcs010.meec
Enterprise Unit tppdm600.entu
Enterprise Unit Desc tcemm030.dsca
Financial Company tppdm600.ncmp
Financial Company Desc tcemm170.desc
Financial Result Status tppdm600.pstf
Financial Result Status Filter tppdm600.pstf
Conformed dimensions
48 | Infor LN Analytics Foundation for Birst User Guide
Attribute Mapping
Financial Result Status Sort tppdm600.pstf
Financing Method tppdm600.cfac
Financing Method Desc tppdm059.desc
Finish Time tppdm600.dldt
GPS Latitude tccom130.glat
GPS Location Geo attribute combining GPS Latitude and GPS Longitude. Includes tooltip with Project Desc.
GPS Longitude tccom130.glon
Geographical Area tppdm600.creg
Geographical Area Desc tcmcs045.dsca
Group tppdm600.ccot
Group Desc tppdm065.desc
Hierarchy Type tppdm600.kopr
Hierarchy Type Filter tppdm600.kopr
Hierarchy Type Sort tppdm600.kopr
ISO Country Code Alpha-2 tcmcs010.ict2
In Service tcmcs052.isrv
In-Service Filter tcmcs052.isrv
In-Service Sort tcmcs052.isrv
Internal Project tppdm600.intp
Internal Project Filter tppdm600.intp
Internal Project Sort tppdm600.intp
Invoice Type tppdm600.invm
Invoice Type Filter tppdm600.invm
Invoice Type Sort tppdm600.invm
Logistic Company tcemm050.lcmp
Logistic Company Desc tcemm170.desc
Main Project tppdm600.mprj
Main Project Desc tcmcs052.dsca
Organization Breakdown Structure tppdm600.cobs
Phase tppdm600.cstg
Conformed dimensions
Infor LN Analytics Foundation for Birst User Guide | 49
Attribute Mapping
Phase Desc tppdm085.desc
Program tppdm600.prgm
Program Desc tpctm010.dsca
Project tcmcs052.cprj
Project Creation Date tppdm600.pcrd
Project Currency tppdm600.ccur
Project Desc tcmcs052.dsca
Project Management Office tcmcs052.dsca
Project Manager tppdm600.pmng
Project Manager Name tccom001.nama
Project Status tppdm600.psts
Project Status Filter tppdm600.psts
Project Status Sort tppdm600.psts
Reason tppdm600.cdis
Search Key a tcmcs052.seak
Search Key b tcmcs052.seab
Start Time tppdm600.stdt
State Province Desc tcmcs143.dsca
State/Province tccom130.cste
Substantial Completion Date tppdm600.fddt
Template tppdm600.tmpl
Template Filter tppdm600.tmpl
Template Sort tppdm600.tmpl
Time Zone tcemm100.timz
Time Zone Code tccom130.tzid
Time Zone Desc tcemm100.dsca
Use Organization Breakdown Structure tppdm600.uobs
Use Organization Breakdown Structure Filter tppdm600.uobs
Use Organization Breakdown Structure Sort tppdm600.uobs
deleted
Conformed dimensions
50 | Infor LN Analytics Foundation for Birst User Guide
Attribute Mapping
Customer Defined Fields Standard list of fields
Address fields are included for tppdm600.padr.
Reason This table shows the table from which fields are retrieved for the dimension:
Table Description
tcmcs005 Reasons
This table shows the attribute mapping for the dimension:
Attribute Mapping
Approval tcmcs005.appr
Approval Filter tcmcs005.appr
Approval Sort tcmcs005.appr
Billable tcmcs005.bilb
Billable Filter tcmcs005.bilb
Billable Sort tcmcs005.bilb
Direct Pay Indicator tcmcs005.drpi
Direct Pay Indicator Filter tcmcs005.drpi
Direct Pay Indicator Sort tcmcs005.drpi
Effective Date tcmcs005.efdt
Excess Transportation Reason tcmcs005.etrt
Excess Transportation Reason Filter tcmcs005.etrt
Excess Transportation Reason Sort tcmcs005.etrt
Expiry Date tcmcs005.exdt
Reason tcmcs005.cdis
Reason Desc tcmcs005.dsca
Reason Type tcmcs005.rstp
Reason Type Filter tcmcs005.rstp
Conformed dimensions
Infor LN Analytics Foundation for Birst User Guide | 51
Attribute Mapping
Reason Type Sort tcmcs005.rstp
deleted 1 if deleted in LN else 0
Customer Defined Fields Standard list of fields
Return Reason The return reason dimension is a role-playing dimension of the conformed reason dimension with filter reason type = ‘Return of Goods’.
For field mapping, see Reason dimension. The only difference is that attributes Reason and Reason Desc have been replaced by Return Reason and Return Reason Desc.
Ship-to Address The ship-to address dimension is a role-playing dimension of the conformed address dimension.
For field mapping, see Address dimension. Only difference is that attributes Address and Address Name have been replaced by Ship-to Address and Ship -to Address Name.
Ship-to BP This table shows the tables from which fields are retrieved for the dimension:
Table Description
tccom100 Business Partners
tccom111 Ship-to Business Partners
tccom130 Addresses
tccom139 Cities by Country
tcemm100 Time Zones
tcmcs003 Warehouses
tcmcs010 Countries
tcmcs029 Business Partner Types
Conformed dimensions
52 | Infor LN Analytics Foundation for Birst User Guide
Table Description
tcmcs080 Carriers/LSP
tcmcs143 States/Provinces
This table shows the attribute mapping for the dimension:
Attribute Mapping
Business Partner Status tccom111.bpst
Business Partner Status Filter tccom111.bpst
Business Partner Status Sort tccom111.bpst
Business Partner Type tccom111.cbtp
Business Partner Type Desc tcmcs029.dsca
Carrier LSP Desc tcmcs080.dsca
Carrier/LSP tccom111.cfrw
City tccom130.ccit
City Desc tccom139.dsca
Country tccom130.ccty
Country Desc tcmcs010.dsca
EU Member State tcmcs010.meec
EU Member State Filter tcmcs010.meec
EU Member State Sort tcmcs010.meec
End Date tccom111.endt
GPS Latitude tccom130.glat
GPS Location
Geo attribute combining GPS Latitude and GPS Longitude. Includes tooltip with Ship-to BP Name
GPS Longitude tccom130.glon
ISO Country Code Alpha-2 tcmcs010.ict2
Ship to BP Name tccom100.nama
Ship-to BP tccom111.stbp
Site tccom111.site
Site Desc tcemm050.desc
Start Date tccom111.stdt
Conformed dimensions
Infor LN Analytics Foundation for Birst User Guide | 53
Attribute Mapping
State Province Desc tcmcs143.dsca
State/Province tccom130.cste
Time Zone tcemm100.timz
Time Zone Code tccom130.tzid
Time Zone Desc tcemm100.dsca
Warehouse tccom111.cwar
Warehouse Desc tcmcs003.dsca
deleted 1 if deleted in LN else 0
Customer Defined Fields Standard list of fields
Address fields are included for tccom111.cadr.
Site This table shows the tables from which fields are retrieved for the dimension:
Table Description
tccom130 Addresses
tccom139 Cities by Country
tcemm050 Sites
tcemm100 Time Zones
tcemm135 Clusters
tcemm170 Companies
tcmcs003 Warehouses
tcmcs010 Countries
tcmcs143 States/Provinces
This table shows the attribute mapping for the dimension:
Attribute Mapping
Administrative Only tcemm050.admo
Administrative Only Filter tcemm050.admo
Conformed dimensions
54 | Infor LN Analytics Foundation for Birst User Guide
Attribute Mapping
Administrative Only Sort tcemm050.admo
City tccom130.ccit
City Desc tccom139.dsca
Country tccom130.ccty
Country Desc tcmcs010.dsca
Default Warehouse tcemm050.cwar
Default Warehouse Desc tcmcs003.dsca
EU Member State tcmcs010.meec
EU Member State Filter tcmcs010.meec
EU Member State Sort tcmcs010.meec
External Site tcemm050.xsit
External Site Filter tcemm050.xsit
External Site Sort tcemm050.xsit
GPS Latitude tccom130.glat
GPS Location Geo attribute combining GPS Latitude and GPS Longitude. Includes tooltip with Site Desc
GPS Longitude tccom130.glon
ISO Country Code Alpha-2 tcmcs010.ict2
Logistic Company tcemm050.lcmp
Logistic Company Desc tcemm170.desc
Parent Site tcemm050.psit
Parent Site Desc tcemm050.desc
Planning Cluster tcemm050.clus
Planning Cluster Desc tcemm135.desc
Site tcemm050.site
Site Desc tcemm050.desc
Site Status tcemm050.stat
Site Status Filter tcemm050.stat
Site Status Sort tcemm050.stat
State Province Desc tcmcs143.dsca
State/Province tccom130.cste
Conformed dimensions
Infor LN Analytics Foundation for Birst User Guide | 55
Attribute Mapping
Time Zone tcemm100.timz
Time Zone Code tccom130.tzid
Time Zone Desc tcemm100.dsca
deleted 1 if deleted in LN else 0
Customer Defined Fields Standard list of fields
Address fields are included for tcemm050.cadr.
Sold-to Address The sold-to address dimension is a role-playing dimension of the conformed address dimension.
For field mapping, see Address dimension. The only difference is that attributes Address and Address Name have been replaced by Sold-to Address and Sold-to Address Name.
Sold-to BP This table shows the tables from which fields are retrieved for the dimension:
Table Description
tccom100 Business Partners
tccom110 Sold-to Business Partners
tccom130 Addresses
tccom139 Cities by Country
tcemm100 Time Zones
tcibd301 List Groups
tcmcs010 Countries
tcmcs029 Business Partner Types
tcmcs031 Lines of Business
tcmcs045 Areas
tcmcs065 Departments
tcmcs066 Channels
Conformed dimensions
56 | Infor LN Analytics Foundation for Birst User Guide
Table Description
tcmcs125 Industry Codes
tcmcs127 Sales Territories
tcmcs143 States/Provinces
This table shows the attribute mapping for the dimension:
Attribute Mapping
Area tccom110.creg
Area Desc tcmcs045.dsca
Business Partner Status tccom110.bpst
Business Partner Status Filter tccom110.bpst
Business Partner Status Sort tccom110.bpst
Business Partner Type tccom110.cbtp
Business Partner Type Desc tcmcs029.dsca
Channel tccom110.chan
Channel Desc tcmcs066.dsca
City tccom130.ccit
City Desc tccom139.dsca
Country tccom130.ccty
Country Desc tcmcs010.dsca
EU Member State tcmcs010.meec
EU Member State Filter tcmcs010.meec
EU Member State Sort tcmcs010.meec
End Date tccom110.endt
GPS Latitude tccom130.glat
GPS Location
Geo attribute combining GPS Latitude and GPS Longitude. Includes tooltip with Sold-to BP Name
GPS Longitude tccom130.glon
ISO Country Code Alpha-2 tcmcs010.ict2
Industry Code tccom110.incd
Industry Code Desc tcmcs125.dsca
Conformed dimensions
Infor LN Analytics Foundation for Birst User Guide | 57
Attribute Mapping
Line of Business tccom110.cbrn
Line of Business Desc tcmcs031.dsca
List Group tccom110.clgr
List Group Desc tcibd301.dsca
Rating tccom110.rtng
Rating Filter tccom110.rtng
Rating Sort tccom110.rtng
Sales Office tccom110.cofc
Sales Office Desc tcmcs065.dsca
Sales Territory tccom110.ster
Sales Territory Desc tcmcs127.dsca
Sold to BP Name tccom100.nama
Sold-to BP tccom110.otbp
Start Date tccom110.stdt
State Province Desc tcmcs143.dsca
State/Province tccom130.cste
Time Zone tcemm100.timz
Time Zone Code tccom130.tzid
Time Zone Desc tcemm100.dsca
deleted 1 if deleted in LN else 0
Customer Defined Fields Standard list of fields
Address fields are included for tccom110.cadr.
Transaction Currency This table shows the table from which fields are retrieved for the dimension:
Table Description
tcmcs002 Currencies
Conformed dimensions
58 | Infor LN Analytics Foundation for Birst User Guide
This table shows the attribute mapping for the dimension:
Attribute Mapping
ISO Currency Code tcmcs002.iccc
Transaction Currency tcmcs002.ccur
Transaction Currency Desc tcmcs002.dsca
deleted 1 if deleted in LN else 0
Customer Defined Fields Standard list of fields
Transaction Unit This table shows the table from which fields are retrieved for the dimension:
Table Description
tcmcs001 Units
This table shows the attribute mapping for the dimension:
Attribute Mapping
ISO Code tcmcs001.icun
Physical Quantity tcmcs001.tccu
Physical Quantity Filter tcmcs001.tccu
Physical Quantity Sort tcmcs001.tccu
Transaction Unit tcmcs001.cuni
Transaction Unit Desc tcmcs001.dsca
deleted 1 if deleted in LN else 0
Customer Defined Fields Standard list of fields
Warehouse This table shows the tables from which fields are retrieved for the dimension:
Conformed dimensions
Infor LN Analytics Foundation for Birst User Guide | 59
Table Description
tccom130 Addresses
tccom139 Cities by Country
tcemm030 Enterprise Units
tcemm050 Sites
tcemm100 Time Zones
tcemm170 Companies
tcmcs003 Warehouses
tcmcs010 Countries
tcmcs143 States/Provinces
whwmd200 Warehouses
This table shows the attribute mapping for the dimension:
Attribute Mapping
City tccom130.ccit
City Desc tccom139.dsca
Country tccom130.ccty
Country Desc tcmcs010.dsca
EU Member State tcmcs010.meec
EU Member State Filter tcmcs010.meec
EU Member State Sort tcmcs010.meec
Enterprise Unit tcemm030.eunt
Enterprise Unit Desc tcemm030.dsca
External Site tcmcs003.xsit
External Site Filter tcmcs003.xsit
External Site Sort tcmcs003.xsit
Financial Company tcmcs003.comp
Financial Company Desc tcemm170.desc
GPS Latitude tccom130.glat
GPS Location Geo attribute combining GPS Latitude and GPS Longitude. Includes tooltip with Warehouse Desc
Conformed dimensions
60 | Infor LN Analytics Foundation for Birst User Guide
Attribute Mapping
GPS Longitude tccom130.glon
ISO Country Code Alpha-2 tcmcs010.ict2
Include in Enterprise Planning tcmcs003.inep
Include in Enterprise Planning Filter tcmcs003.inep
Include in Enterprise Planning Sort tcmcs003.inep
Inventory Management tcmcs003.imgt
Inventory Management Filter tcmcs003.imgt
Inventory Management Sort tcmcs003.imgt
Logistic Company tcemm030.lcmp
Logistic Company Desc tcemm170.desc
Project WIP Warehouse tcmcs003.pwip
Project WIP Warehouse Filter tcmcs003.pwip
Project WIP Warehouse Sort tcmcs003.pwip
Shop Floor Warehouse Used At tcmcs003.swhu
Shop Floor Warehouse Used At Filter tcmcs003.swhu
Shop Floor Warehouse Used At Sort tcmcs003.swhu
Site whwmd200.site
Site Desc tcemm050.desc
State Province Desc tcmcs143.dsca
State/Province tccom130.cste
Time Zone tcemm100.timz
Time Zone Code tccom130.tzid
Time Zone Desc tcemm100.dsca
WMS Controlled tcmcs003.wmsc
WMS Controlled Filter tcmcs003.wmsc
WMS Controlled Sort tcmcs003.wmsc
Warehouse tcmcs003.cwar
Warehouse Desc tcmcs003.dsca
Warehouse Type tcmcs003.typw
Warehouse Type Filter tcmcs003.typw
Conformed dimensions
Infor LN Analytics Foundation for Birst User Guide | 61
Attribute Mapping
Warehouse Type Sort tcmcs003.typw
deleted 1 if deleted in LN else 0
Customer Defined Fields Standard list of fields
Address fields are included for tcmcs003.cadr.
Job shop domain information
62 | Infor LN Analytics Foundation for Birst User Guide
Chapter 4 Job shop domain information
Dimensions The Job Shop domain uses these conformed dimensions:
Conformed dimension Company
Cost Component
Department
Employee
Item
PCS Project
Reason
Site
Warehouse
The Job Shop domain uses these domain specific dimensions:
Domain specific dimension Calculation Office
Machine
Material
Planner
Production Material
Production Material Detail
Production Operation
Production Operation Detail
Production Order
Job shop domain information
Infor LN Analytics Foundation for Birst User Guide | 63
Domain specific dimension
Production Order Detail
Production Total Cost Detail
Reject Reason
Shop Floor Planner
Task
Work Center
This table shows the drill maps available for all reports that include mentioned columns:
Dimension Drill columns
Calculation Office Country – State/Province – City
Logistic Company – Enterprise Unit – Work Center
Material Item Group – Item
Product Type – Item
Product Line – Item
Product Class – Item
Manufacturer – Item
Planner Country – State/Province – City
Shop Floor Planner Country – State/Province – City
Work Center Country – State/Province – City
Logistic Company – Enterprise Unit – Work Center
Calculation Office The calculation office dimension is a role-playing dimension of the work center dimension.
For field mapping, see Work Center dimension:
The only difference is that attributes Work Center and Work Center Desc have been replaced by Calculation Office and Calculation Office Desc.
Job shop domain information
64 | Infor LN Analytics Foundation for Birst User Guide
Machine This table shows the tables from which fields are retrieved for the dimension:
Table Description
tcemm050 Site
tcmcs065 Department
tirou002 Machine
This table shows the attribute mapping for the dimension:
Attribute Mapping
Basic Day Capacity tirou002.mdcp
Desired Queue tirou002.dque
Machine tirou002.mcno
Machine Desc tirou002.dsca
Site tirou002.site
Site Desc tcemm050.desc
Week Capacity tirou002.mccp
Work Center tirou002.cwoc
Work Center Desc tcmcs065.dsca
deleted 1 if deleted in LN else 0
Customer Defined Fields Standard list of fields
Material The material dimension is a role-playing dimension of the conformed item dimension with filter ‘Item Type’ = Purchase or Manufactured or Product.
For field mapping see Item dimension. The only difference is that attributes Item and Item Desc have been replaced by Material and Material Desc.
Planner The planner dimension is a role-playing dimension of the conformed employee dimension.
Job shop domain information
Infor LN Analytics Foundation for Birst User Guide | 65
For field mapping, see Employee dimension. The only difference is that attributes Employee and Employee Name have been replaced by Planner and Planner Name.
Production Material This table shows the table from which fields are retrieved for the dimension:
Table Description
ticst001 Estimated and Actual Material Costs
This table shows the attribute mapping for the dimension:
Attribute Mapping
Position ticst001.pono
Production Material Detail This table shows the table from which fields are retrieved for the dimension:
Table Description
ticst001 Estimated and Actual Material Costs
This table shows the attribute mapping for the dimension:
Attribute Mapping
Allocation Type ticst001.alty
Allocation Type Filter ticst001.alty
Allocation Type Sort ticst001.alty
Backflushing ticst001.bfls
Backflushing Filter ticst001.bfls
Backflushing Sort ticst001.bfls
Direct Initiate Inventory Issue ticst001.drin
Direct Initiate Inventory Issue Filter ticst001.drin
Direct Initiate Inventory Issue Sort ticst001.drin
Job shop domain information
66 | Infor LN Analytics Foundation for Birst User Guide
Attribute Mapping
Direct Process Warehouse Order Line ticst001.dris
Direct Process Warehouse Order Line Filter ticst001.dris
Direct Process Warehouse Order Line Sort ticst001.dris
Engineering Item Revision ticst001.revi
Lot Code ticst001.clot
Lot Selection ticst001.lsel
Lot Selection Filter ticst001.lsel
Lot Selection Sort ticst001.lsel
Material Control Method ticst001.mcmd
Material Control Method Filter ticst001.mcmd
Material Control Method Sort ticst001.mcmd
Rework Item ticst001.rwit
Rework Item Filter ticst001.rwit
Rework Item Sort ticst001.rwit
Subassembly ticst001.sayn
Subassembly Filter ticst001.sayn
Subassembly Sort ticst001.sayn
Production Operation When a record is deleted in LN, a record with deleted = 1 is stored in the dimension. Records are not removed from the dimension. A production operation that is not yet completed and is deleted in LN is hidden in the degenerate dimension in Birst. Completed operations that are deleted when archiving orders are not hidden and remain available for analysis.
This table shows the table from which fields are retrieved for the dimension:
Table Description
tisfc010 Production Order Operations
This table shows the attribute mapping for the dimension:
Attribute Mapping
Actual Ready to Start Date tisfc010.ardt
Job shop domain information
Infor LN Analytics Foundation for Birst User Guide | 67
Attribute Mapping
Actual Start Date tisfc010.asdt
Completion Date tisfc010.cmdt
Move Start Date tisfc010.fidt
Operation tisfc010.opno
Planned Finish Date tisfc010.pfdt
Planned Start Date tisfc010.psdt
Production Order tisfc010.pdno
Queue Start Date tisfc010.esdt
Queue Start Next Operation tisfc010.mvrd
Remainder Start Date tisfc010.rsdt
Setup and Run Next Operation tisfc010.lfdt
Setup Run Start Date tisfc010.prdt
Transport Date From tisfc010.trdf
Transport Date To tisfc010.trdt
Transport Date To Next Operation tisfc010.trno
Wait Start Date tisfc010.prrd
deleted 1 if deleted in LN else 0
Production Operation Detail This table shows the table from which fields are retrieved for the dimension:
Table Description
ticst002 Estimated and Actual Hours
tisfc010 Production Order Operations
This table shows the attribute mapping for the dimension:
Attribute Mapping
Backflushing tisfc010.bfls
Backflushing Filter tisfc010.bfls
Job shop domain information
68 | Infor LN Analytics Foundation for Birst User Guide
Attribute Mapping
Backflushing Sort tisfc010.bfls
DMS on Completion tisfc010.dmso
DMS on Completion Filter tisfc010.dmso
DMS on Completion Sort tisfc010.dmso
Fixed Duration tisfc010.fdur
Fixed Duration Filter tisfc010.fdur
Fixed Duration Sort tisfc010.fdur
Fixed Planning Dates tisfc010.fxpd
Fixed Planning Dates Filter tisfc010.fxpd
Fixed Planning Dates Sort tisfc010.fxpd
Frozen Operation tisfc010.frso
Frozen Operation Filter tisfc010.frso
Frozen Operation Sort tisfc010.frso
Next Operation tisfc010.nopr
Operation Rate Code ticst002.oprc
Operation Status tisfc010.opst
Operation Status Filter tisfc010.opst
Operation Status Sort tisfc010.opst
Start Operation tisfc010.sopr
Start Operation Filter tisfc010.sopr
Start Operation Sort tisfc010.sopr
Use Transfer Batch tisfc010.tlyn (aka Transfer Batch Less Than Production Batch)
Use Transfer Batch Filter tisfc010.tlyn
Use Transfer Batch Sort tisfc010.tlyn
Yield Type tisfc010.ydtp
Yield Type Filter tisfc010.ydtp
Yield Type Sort tisfc010.ydtp
Job shop domain information
Infor LN Analytics Foundation for Birst User Guide | 69
Production Order When a record is deleted in LN, a record with deleted = 1 is stored in the dimension. Records are not removed from the dimension. A production order that has status Created, Modify, Scheduled or Printed and is deleted in LN, is hidden in the degenerate dimension in Birst. Production orders with status Closed or Archived that are deleted when archiving orders, are not hidden and remain available for analysis.
This table shows the table from which fields are retrieved for the dimension:
Table Description
tisfc001 Production Orders
This table shows the attribute mapping for the dimension:
Attribute Mapping
Actual Closing date tisfc001.cldt
Actual Delivery Date tisfc001.adld
Actual Production Start Date tisfc001.apdt
Calculation Date tisfc001.cada
Completion Date tisfc001.cmdt
Confirmed Delivery Date tisfc001.cdld
Planned Delivery Date tisfc001.pldt
Planned Production Start Date tisfc001.prdt
Production Order tisfc001.pdno
Reference Date tisfc001.efdt
Requested Delivery Date tisfc001.rdld
deleted 1 if deleted in LN else 0
Production Order Detail This table shows the table from which fields are retrieved for the dimension:
Table Description
tisfc001 Production Orders
This table shows the attribute mapping for the dimension:
Job shop domain information
70 | Infor LN Analytics Foundation for Birst User Guide
Attribute Mapping
Backflush Hours tisfc001.bfhr
Backflush Hours Filter tisfc001.bfhr
Backflush Hours Sort tisfc001.bfhr
Backflush Materials tisfc001.bfep
Backflush Materials Filter tisfc001.bfep
Backflush Materials Sort tisfc001.bfep
Engineering Item Revision tisfc001.revi
Lot Code tisfc001.clot
Moving Method Next Operations tisfc001.mmno
Moving Method Next Operations Filter tisfc001.mmno
Moving Method Next Operations Sort tisfc001.mmno
Moving Method Previous Operations tisfc001.mmpo
Moving Method Previous Operations Filter tisfc001.mmpo
Moving Method Previous Operations Sort tisfc001.mmpo
Operations Present tisfc001.oprp
Operations Present Filter tisfc001.oprp
Operations Present Sort tisfc001.oprp
Order Status tisfc001.osta
Order Status Filter tisfc001.osta
Order Status Sort tisfc001.osta
Planning Method tisfc001.cpla
Planning Method Filter tisfc001.cpla
Planning Method Sort tisfc001.cpla
Priority tisfc001.prcd
Rework Order tisfc001.rwko
Rework Order Filter tisfc001.rwko
Rework Order Sort tisfc001.rwko
Rework Type tisfc001.rwtp
Rework Type Filter tisfc001.rwtp
Rework Type Sort tisfc001.rwtp
Job shop domain information
Infor LN Analytics Foundation for Birst User Guide | 71
Attribute Mapping
Routing tisfc001.opro
Routing Group tisfc001.rgrp
Production Total Cost Detail This table shows the table from which fields are retrieved for the dimension:
Table Description
ticst010 End Item Unit Costs
This table shows the attribute mapping for the dimension:
Attribute Mapping
Added Costs ticst010.addc
Added Costs Filter ticst010.addc
Added Costs Sort ticst010.addc
Customer Owned ticst010.csto
Customer Owned Filter ticst010.csto
Customer Owned Sort ticst010.csto
Note: Cost View is not available in this dimension because there is no need to filter on Cost View = Work Center-based Costs or Item-base Costs. Instead, total cost measures have been split into Work Center and Item measures.
Reject Reason The reject reason dimension is a role-playing dimension of the conformed reason dimension with filter reason type = ‘Rejection of Production Result’.
For field mapping see Reason dimension. The only difference is that attributes Reason and Reason Desc have been replaced by Reject Reason and Reject Reason Desc.
Shop Floor Planner The shop floor planner dimension is a role-playing dimension of the conformed employee dimension.
Job shop domain information
72 | Infor LN Analytics Foundation for Birst User Guide
For field mapping, see Employee dimension. The only difference is that attributes Employee and Employee Name have been replaced by Shop Floor Planner and Shop Floor Planner Name.
Task This table shows the tables from which fields are retrieved for the dimension:
Table Description
tcmcs065 Department
tirou002 Machine
tirou003 Task
This table shows the attribute mapping for the dimension:
Attribute Mapping
Default Machine tirou003.mcno
Default Machine Desc tirou002.dsca
Default Work Center tirou003.cwoc
Default Work Center Desc tcmcs065.dsca
Extra Information tirou003.exin
Machine Selection Method tirou003.mlmc
Machine Selection Method Filter tirou003.mlmc
Machine Selection Method Sort tirou003.mlmc
Search Key tirou003.seak
Task tirou003.tano
Task Desc tirou003.dsca
Work Center Selection Method tirou003.mlwc
Work Center Selection Method Filter tirou003.mlwc
Work Center Selection Method Sort tirou003.mlwc
deleted 1 if deleted in LN else 0
Customer Defined Fields Standard list of fields
Job shop domain information
Infor LN Analytics Foundation for Birst User Guide | 73
Work Center This table shows the tables from which fields are retrieved for the dimension:
Table Description
tccom001 Employee
tccom130 Addresses
tccom139 Cities by Country
tcemm030 Enterprise Units
tcemm050 Site
tcemm100 Time Zones
tcemm170 Company
tcmcs003 Warehouse
tcmcs010 Countries
tcmcs065 Department
tcmcs143 States/Provinces
tirou001 Work Center
This table shows the attribute mapping for the dimension:
Attribute Mapping
Available Labor Resources tirou001.noop (aka Number of Operators)
Basic Day Capacity tirou001.dcru
Basic Week Capacity tirou001.wcru
City tccom130.ccit
City Desc tccom139.dsca
Constraint Time Fence tirou001.crtf
Constraint Type tirou001.crty
Constraint Type Filter tirou001.crty
Constraint Type Sort tirou001.crty
Costing Work Center tirou001.ctwc
Costing Work Center Desc tcmcs065.desc
Country tccom130.ccty
Country Desc tcmcs010.dsca
Job shop domain information
74 | Infor LN Analytics Foundation for Birst User Guide
Attribute Mapping
Critical Capacity for Planning tirou001.ccap
Critical Capacity for Planning Filter tirou001.ccap
Critical Capacity for Planning Sort tirou001.ccap
Critical in Planning tirou001.crmp
Critical in Planning Filter tirou001.crmp
Critical in Planning Sort tirou001.crmp
Default Labor Resource tirou001.bfem (aka Backflush Employee)
Default Labor Resource Name tccom001.nama (Backflush Employee Name)
Desired Queue tirou001.dque
EU Member State tcmcs010.meec
EU Member State Filter tcmcs010.meec
EU Member State Sort tcmcs010.meec
Enterprise Unit tcemm030.eunt
Enterprise Unit Desc tcemm030.dsca
Financial Company tcmcs065.comp
Financial Company Desc tcemm170.desc
GPS Latitude tccom130.glat
GPS Location Geo attribute combining GPS Latitude and GPS Longitude. Includes tooltip with Work Center Desc
GPS Longitude tccom130.glon
ISO Country Code Alpha-2 tcmcs010.ict2
Logistic Company tcemm030.lcmp
Logistic Company Desc tcemm170.desc
Manager tcmcs065.emno
Manager Name tccom001.nama
Move Time tirou001.mvtm
Number of Machines tirou001.nomc
PCS Rough Capacity tirou001.upcs
PCS Rough Capacity Filter tirou001.upcs
PCS Rough Capacity Sort tirou001.upcs
Job shop domain information
Infor LN Analytics Foundation for Birst User Guide | 75
Attribute Mapping
Parent Work Center tirou001.mnwc
Parent Work Center Desc tcmcs065.desc
Primary Company tirou001.swcc
Primary Company Desc tcemm170.desc
Production Department tirou001.pddp
Production Department Desc tcmcs065.desc
Queue Time tirou001.qutm
Shared Type tirou001.swct
Shared Type Filter tirou001.swct
Shared Type Sort tirou001.swct
Shop Floor Warehouse tirou001.wipw
Shop Floor Warehouse Desc tcmcs003.dsca
Site tcmcs065.site
Site Desc tcemm050.desc
State Province Desc tcmcs143.dsca
State/Province tccom130.cste
Subcontractor Independent tirou001.scid
Subcontractor Independent Filter tirou001.scid
Subcontractor Independent Sort tirou001.scid
Time Unit tirou001.tuni
Time Unit Filter tirou001.tuni
Time Unit Sort tirou001.tuni
Time Zone tcemm100.timz
Time Zone Code tccom130.tzid
Time Zone Desc tcemm100.dsca
Use as Calculation Office tirou001.usco
Use as Calculation Office Filter tirou001.usco
Use as Calculation Office Sort tirou001.usco
Wait Time tirou001.wttm
Work Center tirou001.cwoc
Job shop domain information
76 | Infor LN Analytics Foundation for Birst User Guide
Attribute Mapping
Work Center Desc tirou001.dsca
Work Center Type tirou001.kowc
Work Center Type Filter tirou001.kowc
Work Center Type Sort tirou001.kowc
deleted 1 if deleted in LN else 0
Customer Defined Fields Standard list of fields
Address fields are included for tcmcs065.cadr.
Job shop domain information
Infor LN Analytics Foundation for Birst User Guide | 77
Facts The Job Shop domain contains these facts:
• Production Order
• Production Operation
• Production Material
• Production Total Cost
Production Order
Star schema The Product Order fact table is based on tisfc001 Production Orders. If a production order is deleted in LN, a record with deleted = 1 is stored in the fact table in Birst. These facts are hidden if the production order status is Created, Modify, Scheduled or Printed. When archiving orders, production orders that are deleted with status Closed or Archived are not hidden and remain available for analysis.
This diagram shows the star schema:
Job shop domain information
78 | Infor LN Analytics Foundation for Birst User Guide
Dimensions
Dimension Type Note
Calculation Office Domain specific
Company Conformed
Item Conformed (1) No Product Variant dimension
PCS Project Conformed
Planner Domain specific
Production Order Domain specific
Production Order Detail Domain specific
Reject Reason Domain specific
Job shop domain information
Infor LN Analytics Foundation for Birst User Guide | 79
Dimension Type Note
Shop Floor Planner Domain specific
Site Conformed
Time Birst (2) Start Date + End Date
Warehouse Conformed
(1) The Product Variant dimension is not targeted for production orders. In LN, a unique item exists for each product variant used in Job Shop. In Job Shop BI, the product variant becomes an attribute in the Item dimension.
(2) You can analyze by two production order dates: Start Date and End Date.
Start Date = Actual Start Date, Planned Start Date if there is no Actual Start Date.
End Date = Completion Date, Planned Delivery Date if there is no Completion Date.
Measures This table shows the measures that are mapped to table fields or calculated:
Measure Mapping Note
Active 1 if order status is Active, else 0
Actual Production Time Hours
Actual Delivery Date – Actual Start Date
0 if negative
0 if not delivered or not started
Actual Throughput Duration
Actual Delivery Date – Actual Production Start Date
0 if negative
0 if not delivered or not started
2
Bad Quantity Quantity Scrapped + Quantity Rejected + Quantity Quarantined 1
Closed 1 if order status is Closed, else 0
Completed 1 if order status is Completed, else 0
Delivered Early Days Requested Delivery Date - Actual Delivery Date
0 if negative
2
Delivered Late Days Actual Delivery Date - Requested Delivery Date
0 if negative
2
Job shop domain information
80 | Infor LN Analytics Foundation for Birst User Guide
Measure Mapping Note
Early 1 if Actual Delivery Date is before Planned Delivery Date
0 if Actual Delivery Date is on or after Planned Delivery Date
0 if not delivered (no Actual Delivery Date)
Late 1 if Actual Delivery Date is after Planned Delivery Date
0 if Actual Delivery Date is before or on Planned Delivery Date
0 if not delivered (no Actual Delivery Date)
On Time 1 if Actual Delivery Date is on Planned Delivery Date (same day)
0 if Actual Delivery Date is before or after Planned Delivery Date
0 if not delivered (no Actual Delivery Date)
Overrun Actual Throughput Duration - Planned Throughput Duration
0 if Actual Throughput Duration is less than Planned Throughput Duration
Overrun Ratio Overrun / Planned Throughput Duration
0 if Planned Throughput Duration is 0
4
Perfect Order 1 if not late and no shortage (Late = 0 and Shortage = 0)
0 if late and/or shortage
Perfect Order Ratio Perfect Order / Production Order Count 4
Planned Production Time Hr
Planned Delivery Date – Production Start Date
0 if negative
Planned Throughput Duration
Requested Delivery Date – Production Start Date
0 if negative
2
Production Completed 1 if order status is Production Completed, else 0
Production Order Count Count
Quantity Backflushed tisfc001.qbfd 1
Quantity Delivered tisfc001.qdlv 1
Quantity Initial tisfc001.qntl 1
Quantity Negative Variance
-1 * Quantity Variance if negative else 0 1
Quantity Ordered tisfc001.qrdr 1
Job shop domain information
Infor LN Analytics Foundation for Birst User Guide | 81
Measure Mapping Note
Quantity Positive Variance
Quantity Variance if positive else 0
1
Quantity Quarantined tisfc001.qqar 1
Quantity Ratio Quantity Delivered / Quantity Ordered 4
Quantity Rejected tisfc001.qtor 1
Quantity Scrapped tisfc001.qrjc 1
Quantity Variance Quantity Delivered - Quantity Ordered 1
Quantity to Backflush tisfc001.qtbf 1
Quantity to Deliver tisfc001.qtdl 1
Reject Ratio Bad Quantity / (Bad Quantity + Quantity Delivered) 4
Shortage 1 if Quantity to Deliver + Quantity Delivered is less than Quantity Ordered
0 if Quantity to Deliver + Quantity Delivered is equal to or more than Quantity Ordered
0 if Order Status is before ‘Production Completed’
3
1 (1) Quantity facts are semi-additive (SA): quantities are expressed in the inventory unit of the item, they can be summed safely for a single item and for multiple items with the same inventory unit.
2 (2) LN calculates the lead time in days according to the company calendar and availability type (using function tiint.dlltcccp.determine.lead.time.in.days for fields tisfc001.prdt, tisfc001.rdld, tisfc001.apdt, tisfc001.adld). If there is no Actual Delivery Date the lead time is 0.
3 (3) Shortage compares the ordered quantity with the delivered quantity for production orders that have status Completed or later. But Shortage is always set to 0 for orders that have not been completed: for orders that are not yet completed, the delivered quantity is less than the ordered quantity and shortage is always 1.
4 (4) Saved expression = report level measure, a global expression available for all reports in the consumer space.
Job shop domain information
82 | Infor LN Analytics Foundation for Birst User Guide
Production Operation
Star schema The Product Operation fact table is a combination of tisfc010 Production Order Operations and ticst010 Estimated and Actual Hours. Both provide details at the product operation level.
If a production operation is deleted in LN, a record with deleted = 1 is stored in the fact table in Birst. These facts are hidden if the production operation status is not Completed. Production operations that are deleted with status Completed (when archiving orders) will not be hidden and remain available for analysis.
These production order related dimensions are available, but not drawn in the star schema due to limited space:
• Site, Calculation Office • Item, PCS Project • Planner, Shop Floor Planner • Production Order Detail, Production Order
The production order related dimensions allow you to, for example, analyze how much labor was used for rework orders.
This diagram shows the star schema:
Job shop domain information
Infor LN Analytics Foundation for Birst User Guide | 83
Dimensions
Dimension Type Note
Calculation Office Domain specific
Company Conformed
Item Conformed (1) No Product Variant dimension
Machine Domain specific
PCS Project Conformed
Planner Domain specific
Production Operation Domain specific
Production Operation Detail Domain specific
Job shop domain information
84 | Infor LN Analytics Foundation for Birst User Guide
Dimension Type Note
Production Order Domain specific
Production Order Detail Domain specific
Reject Reason Domain specific
Shop Floor Planner Domain specific
Site Conformed
Task Conformed
Time Birst (2) Start Date + End Date
Work Center Domain specific
(1) The Product Variant dimension is not targeted for production orders. In LN, a unique item exists for each product variant used in Job Shop. In Job Shop BI, the product variant becomes an attribute in the Item dimension.
(2) You can analyze by two production operation dates: Start Date and End Date.
Start Date = Actual Start Date, Setup + Run Start Date if there is no Actual Start Date.
End Date = Completion Date, Wait Start Date if there is no Completion Date.
Measures This table shows the measures that are mapped to table fields or calculated:
Measure Mapping Note
Actual Labor Costs ticst002.awgc 3
Actual Machine Costs ticst002.amcc 3
Actual Machine Hours Production ticst002.ahma
Actual Machine Hours Setup ticst002.ashm
Actual Man Hours Production ticst002.ahmc
Actual Man Hours Setup ticst002.ashc
Actual Overhead Costs ticst002.aohc 3
Actual Production Time Completion Date - Actual Start Date
0 if not yet completed or not yet started
Actual Subcontracting Costs ticst002.ascc 3
Average Setup Time tisfc010.sutm
Job shop domain information
Infor LN Analytics Foundation for Birst User Guide | 85
Measure Mapping Note
Bad Quantity Quantity Scrapped + Quantity Rejected + Quantity Quarantined
2
Completed 1 if Operation Status is Completed, else 0
Early 1 if Completion Date is before Wait Start Date
0 if Completion Date is on or after Wait Start Date
0 if not completed (no Completion Date)
Estimated Labor Costs ticst002.wgcs 3
Estimated Machine Costs ticst002.mccs 3
Estimated Machine Hours Production
ticst002.hrmc
Estimated Machine Hours Setup ticst002.eshc
Estimated Man Hours Production ticst002.hrem
Estimated Man Hours Setup ticst002.eshm
Estimated Overhead Costs ticst002.ohcs 3
Estimated Subcontracting Costs ticst002.sccs 3
Fixed Setup Time SCS tisfc010.fxsu
Labor Cost Negative Variance -1 * Labor Cost Variance if negative else 0 3
Labor Cost Positive Variance Labor Cost Variance if positive else 0 3
Labor Cost Variance Actual Labor Costs – Estimate Labor Costs 3
Late 1 if Completion Date is after Wait Start Date
0 if Completion Date is before or on Wait Start Date
0 if not completed (no Completion Date)
Machine Cost Negative Variance -1 * Machine Cost Variance if negative else 0 3
Machine Cost Positive Variance Machine Cost Variance if positive else 0 3
Machine Cost Variance Actual Machine Costs – Estimate Machine Costs 3
Machine Hours tisfc010.mcho
Man Hours tisfc010.maho
Job shop domain information
86 | Infor LN Analytics Foundation for Birst User Guide
Measure Mapping Note
On Time 1 if Completion Date is on Wait Start Date (same day)
0 if Completion Date is before or after Wait Start Date
0 if not completed (no Completion Date)
Overhead Cost Negative Variance -1 * Overhead Cost Variance if negative else 0 3
Overhead Cost Positive Variance Overhead Cost Variance if positive else 0 3
Overhead Cost Variance Actual Overhead Costs – Estimate Overhead Costs 3
Phantom Scrap Quantity tisfc010.phsp 2
Planned Production Time Wait Start Date – Setup and Run Start Date
Production Operation Count Count
Production Time tisfc010.prtm
Qty Returned from Subcontracting tisfc010.qsbc 2
Quantity Backflushed tisfc010.qbfd 2
Quantity Quarantined ticst002.qqar 2
Quantity Rejected tisfc010.qtor 2
Quantity Scrapped ticst002.qrjc 2
Quantity to Backflush tisfc010.qtbf 2
Quantity to Inspect tisfc010.qtbi 2
Ready to Start 1 if Operation Status is Ready to Start, else 0
Remaining Production Time tisfc010.retm
Setup Scrap ticst002.scpq (aka Scrap Quantity) 2
Setup Time ticst002.sutm
Started 1 if Operation Status is Started, else 0
Subcontracting Cost Negative Variance
-1 * Subcontracting Cost Variance if negative else 0 3
Subcontracting Cost Positive Variance
Subcontracting Cost Variance if positive else 0 3
Subcontracting Cost Variance Actual Subcontracting Costs – Estimate Subcontracting Costs
3
Wait Time tisfc010.trdl 1
Job shop domain information
Infor LN Analytics Foundation for Birst User Guide | 87
(1) Wait fact is fully additive (FA): wait time of production operations can be expressed in days or in hours. Days are converted to 24 hours. This is not possible for Queue, Move and Slack Time.
(2) Quantity facts are semi-additive (SA): quantities are expressed in the inventory unit of the item. They can be summed safely for a single item and for multiple items with the same inventory unit.
(3) Amounts facts are semi-additive (SA): amounts are available in 5 currency types (LC, RC1, RC2, RFC, DWC). Amounts for a currency type can be summed safely for a single company and for multiple companies that have the same currency.
Note: Quantity Planned Input, Quantity Planned Output, and Quantity Completed are not additive (NA) and therefore not listed as measure.
Job shop domain information
88 | Infor LN Analytics Foundation for Birst User Guide
Production Material
Star schema The Product Material fact table is based on ticst001 Estimated and Actual Material Costs.
If Estimated and Actual Material Costs is deleted in LN, a record with deleted = 1 is stored in the Production Material fact table in Birst. These facts are hidden if the production order does not have estimated costs frozen. Estimated and Actual Material Costs that are deleted in LN for production orders that have estimated costs frozen (when archiving orders) are not hidden and remain available for analysis.
These dimensions are production order/operation related and available for material analysis: • Site, Calculation Office • Item, PCS Project • Planner, Shop Floor Planner • Production Order Detail, Production Order, Production Operation (not drawn in the star
schema due to limited space)
The production order related dimensions allow you to, for example, analyze how much material was used for rework orders.
This diagram shows the star schema:
Job shop domain information
Infor LN Analytics Foundation for Birst User Guide | 89
Dimensions
Dimension Type Note
Calculation Office Domain specific
Company Conformed
Item Conformed (1) No Product Variant dimension
Material Domain specific
PCS Project Conformed
Planner Domain specific
Production Material Domain specific
Production Material Detail Domain specific
Job shop domain information
90 | Infor LN Analytics Foundation for Birst User Guide
Dimension Type Note
Production Operation Domain specific
Production Order Domain specific
Production Order Detail Domain specific
Shop Floor Planner Domain specific
Site Conformed
Time Birst (2) Start Date + End Date
Warehouse Conformed (3) Material warehouse
(1) The Product Variant dimension is not targeted for production orders. In LN, a unique item exists for each product variant used in Job Shop. In Job Shop BI, the product variant becomes an attribute in the Item dimension.
(2) You can analyze by Start Date and End Date.
Start Date = Operation Start Date, Order Start Date if no operation.
End Date = Operation End Date, Order End Date if no operation
Where Start Date and End Date are calculated as in the Production Order and Production Operation facts:
• Operation Start Date = Actual Start Date, Setup + Run Start Date if there is no Actual Start Date.
• Order Start Date = Actual Start Date, Planned Start Date if there is no Actual Start Date.
• Operation End Date = Completion Date, Wait Start Date if there is no Completion Date.
• Order End Date = Completion Date, Planned Delivery Date if there is no Completion Date.
(3) Warehouse is the material warehouse, not the produced item warehouse.
Measures This table shows the measures that are mapped to table fields or calculated:
Measure Mapping Note
Actual Amount ticst001.aamt 1
Actual Amount Customer Owned ticst001.aamu 1
Actual Quantity ticst001.qucs 2
Actual Standard Cost ticst001.cpcs 1
Job shop domain information
Infor LN Analytics Foundation for Birst User Guide | 91
Measure Mapping Note
Actual Standard Cost Customer Owned
ticst001.cpcu 1
Amount Customer Owned Negative Variance
-1 * Amount Customer Owned Variance if negative else 0 1
Amount Customer Owned Positive Variance
Amount Customer Owned Variance if positive else 0 1
Amount Customer Owned Variance Actual Amount Customer Owned – Estimate Amount Customer Owned
1
Amount Negative Variance -1 * Amount Variance if negative else 0 1
Amount Positive Variance Amount Variance if positive else 0 1
Amount Variance Actual Amount – Estimate Amount 1
Estimated Amount Estimated Quantity * Estimated Unit Cost
0 if material is Floor Stock
1
Estimated Amount Customer Owned Estimated Quantity * Estimated Cost Customer Owned
0 if material is Floor Stock
1
Estimated Cost Customer Owned ticst001.cues 1
Estimated Quantity ticst001.ques 2
Estimated Unit Cost ticst001.cpes 1
Net Quantity ticst001.qune 2
Production Material Count Count
Quantity Backflushed ticst001.qbfd 2
Quantity Quarantined ticst001.qqar 2
Quantity Rejected ticst001.qtor 2
Quantity Scrapped ticst001.qscr 2
Subsequent Delivery ticst001.subd 2
To Issue ticst001.issu 2
To Issue by Warehousing ticst001.iswh 2
deleted 1 if deleted in LN else 0 3
(1) Amounts facts are semi-additive (SA): amounts are available in 5 currency types (LC, RC1, RC2, RFC, DWC). Amounts for a currency type can be summed safely for a single company and for multiple companies that have the same currency.
Job shop domain information
92 | Infor LN Analytics Foundation for Birst User Guide
(2) Quantity facts are semi-additive (SA): quantities are expressed in the inventory unit of the item. They can be summed safely for a single item and for multiple items with the same inventory unit.
(3) Deleted is a measure in this fact table; for production order and operation, deleted is an attribute in their dimensions.
Job shop domain information
Infor LN Analytics Foundation for Birst User Guide | 93
Production Total Cost Item Estimate Amount
Item Actual Amount
Item Variance Amount
Time Year
Week
Company Address
Site Desc
Calculation Office Desc
Work Center Desc
Planner Name
Shop Floor Planner Name
Item Item Type
Product Variant
PCS Project Desc
Production Total Cost Detail Added Costs
Cost Component Cost Type
Production Total Cost
Star schema The Product Total Cost fact table is based on ticst010 End Item Unit Costs. Infor LN has separate records for Cost View Work Center-based Costs and Item-based Costs. Birst has one consolidated record with separate work center and item measures.
When End Item Unit Costs is deleted in LN, a record with deleted = 1 is stored in the production Total Cost fact table in Birst. These facts are hidden when the production order does not have estimated costs frozen. End Item Unit Costs that is deleted in LN for production orders that have estimated costs frozen (when archiving orders) are not hidden and remain available for analysis.
These dimensions are production order related and available for total cost analysis: • Site, Calculation Office • Item, PCS Project • Planner, Shop Floor Planner • Production Order Detail, Production Order (not drawn in the star schema due to limited
space)
The production order related dimensions allow you, for example, to analyze what the total costs were for rework orders.
This diagram shows the star schema:
Job shop domain information
94 | Infor LN Analytics Foundation for Birst User Guide
Dimensions
Dimension Type Note
Calculation Office Domain specific
Company Conformed
Cost Component Conformed
Item Conformed (1) No Product Variant dimension
PCS Project Conformed
Planner Domain specific
Production Order Domain specific
Production Order Detail Domain specific
Production Total Cost Detail Domain specific
Shop Floor Planner Domain specific
Site Conformed
Time Birst (2) Start Date + End Date
Work Center Domain specific
(1) The Product Variant dimension is not targeted for production orders. In LN, a unique item exists for each product variant used in Job Shop. In Job Shop BI the product variant becomes an attribute in the Item dimension.
(2) You can analyze by two order dates: Start Date and End Date. Start Date = Actual Start Date, Planned Start Date if there is no Actual Start Date. End Date = Completion Date, Planned Delivery Date if there is no Completion Date.
Measures This table shows the measures that are mapped to table fields or calculated:
Measure Mapping Note
Item Actual Amount ticst010.aamt 1
Item Actual Number of Units ticst010.nuna 2
Item Amount Negative Variance -1 * Item Amount Variance if negative else 0 1
Item Amount Positive Variance Item Amount Variance if positive else 0 1
Item Amount Variance Actual Amount – Estimate Amount 1
Job shop domain information
Infor LN Analytics Foundation for Birst User Guide | 95
Measure Mapping Note
Item Estimated Amount ticst010.eamt 1
Item Estimated Number of Units ticst010.nune 2
Item Number of Units Negative Variance -1 * Item Number of Units Variance if negative else 0 2
Item Number of Units Positive Variance Item Number of Units Variance if positive else 0 2
Item Number of Units Variance Actual Number of Units – Estimate Number of Units 2
Production Total Cost Count Count
Work Center Actual Amount ticst010.aamt 1
Work Center Actual Number of Units ticst010.nuna 1
Work Center Amount Negative Variance -1 * Work Center Amount Variance if negative else 0 1
Work Center Amount Positive Variance Work Center Amount Variance if positive else 0 1
Work Center Amount Variance Actual Amount – Estimate Amount 1
Work Center Estimated Amount ticst010.eamt 1
Work Center Estimated Number of Units ticst010.nune 2
Work Center Number of Units Negative Variance
-1 * Work Center Number of Units Variance if negative else 0
2
Work Center Number of Units Positive Variance
Work Center Number of Units Variance if positive else 0
2
Work Center Number of Units Variance Actual Number of Units – Estimate Number of Units 2
deleted 1 if deleted in LN else 0 3
(1) Amounts facts are semi-additive (SA): amounts are available in 5 currency types (LC, RC1, RC2, RFC, DWC). Amounts for a currency type can be summed safely for a single company and for multiple companies that have the same currency.
(2) Number of Units are fully additive (FA): LN does not associate the number of units with a unit of measure, therefore they can be summed across all dimensions.
(3) This fact has deleted as a measure. For production order and operation, ‘deleted’ is an attribute in related dimensions.
Job shop domain information
96 | Infor LN Analytics Foundation for Birst User Guide
Dashboards and reports Dashboards contain embedded filters, standard filters, reports and KPI’s.
Two main dashboards are offered: Job Shop and Overview.
Job Shop Embedded Filters:
• Company
• Year
Standard Filters:
• Currency Type
Specify the currency type to use. The reference currency is the default.
• Currency
Available filters are: Data Warehouse Currency, Local Currency, Reference Currency, Reporting Currency 1 and Reporting Currency 2.
Default is Reference Currency filtered on the first available reference currency. If you have multiple companies and use more than one reference currency, we recommend using a single Data Warehouse Currency across companies.
• Order Status, default is Production Completed, Completed, Closed and Archived.
• Inventory Unit
KPI’s:
• Perfect Order Ratio
Calculated as Perfect Order count/Production Order count.
Drills across to dashboard Perfect Order by Year with standard filters Currency Type and Currency and report Perfect Order Details.
• Reject Ratio
Calculated as Bad Quantity / (Bad Quantity + Quantity Delivered).
Drills across to dashboard Order Reject Details with standard filters Currency Type and Currency and report Order Reject Details.
The report is a production order table chart that displays year, year/quarter, year/month, company, production order, bad quantity, quantity delivered, reject ratio. The KPI shows the ratio for all orders, the report only shows orders with rejects, orders without rejects are filtered out.
Job shop domain information
Infor LN Analytics Foundation for Birst User Guide | 97
The reject ratio on the reject detail report will be different than the reject ration KPI. If there are rejects, the ratio is x.
Reports:
• Total Cost
Production total cost pie chart.
Displays the distribution of estimate or actual amount by cost component cost type (Operation Costs, Material Costs, Surcharge, General Costs).
Column selector allows you to choose between estimate or actual amount.
The currency type and currency filter determine which estimate or actual amount is shown (by default amounts in the first reference currency).
Drill across: starts dashboard Total Cost Details which has an embedded filter for Production Order and report Total Cost Details.
The report is a production total cost table chart that displays estimate or actual amount and number of units per production order.
• Produced Item Quantity
Production order bar chart.
Displays the quantity ordered and delivered by year.
The end date of the production order determines the year (Completion Date/Planned Delivery Date).
Drill through: Standard drill map for time from Year to Date.
• Material
Production material line chart.
Displays the estimated and actual amount (company owned) by year.
The end date of the production operation determines the year (Completion Date/Wait Start Date). If there is no operation, the end date of the production order determines the year (Completion Date/Planned Delivery Date).
The currency type and currency filter determine which estimate or actual amount is shown. By default, amounts are shown in the first reference currency.
Drill through: Standard drill map for time from Year to Date.
• Labor
Production operation line chart.
Displays the estimated and actual labor costs by year.
The end date of the production operation determines the year (Completion Date/Wait Start Date).
Job shop domain information
98 | Infor LN Analytics Foundation for Birst User Guide
The currency type and currency filter determine which estimate or actual amount is shown (by default amounts in the first reference currency).
Drill through: Standard drill map for time from Year to Date.
Overview The Overview dashboard has buttons to start these sub dashboards:
• Produced Items Variance Ranking
• Order Punctuality
• Order Lead Time
• Reject by Reason
• Perfect Order by Year
• Operation Machine and Labor Time
• Material Cost
Produced Items Variance Ranking Embedded filters:
• Cut-off
Specify the number of produced items to show. Default is 5.
• Year
• Company
• Top Bottom
Specify report to show: Produced Item Top Count or Produced Item Bottom Count. Default is Top Count.
Standard filters:
• Order Status, default is Production Completed, Completed, Closed, Archived
Reports:
• Produced Item Top Count
Production order bar chart.
Job shop domain information
Infor LN Analytics Foundation for Birst User Guide | 99
Displays the quantity ratio (quantity delivered / quantity ordered) sorted descendingly, for produced items. The number of produced items to show can be specified via embedded filter ‘Cut-off’.
Drill through starts report Produced Item Top Count Details. The report is a production order table chart that displays produced item, quantity delivered, quantity ordered, item variance (quantity delivered - quantity ordered) and quantity ratio (quantity delivered / quantity ordered), sorted descendingly by quantity ratio.
You are prompted to specify the number of produced items to display. The number can be specified through the embedded filter on the dashboard.
• Produced Item Bottom Count
Production order bar chart.
Displays the quantity ratio (quantity delivered / quantity ordered) sorted ascendingly, for produced items. The number of produced items to display can be specified via an embedded filter.
Drill through starts report Produced Item Bottom Count Details. The report is a production order table chart that displays produced item, quantity delivered, quantity ordered, item variance (quantity delivered - quantity ordered) and quantity ratio (quantity delivered / quantity ordered), sorted ascendingly by quantity ratio.
You are prompted to specify the number of produced items to display. The number can be specified through the embedded filter on the dashboard.
Order Punctuality Embedded filters:
• Year
• Company
• Time Series, default Year to Date
• Calculation Office
• Item
• Order Status, default Production Completed, Completed, Closed, Archived
Report:
• Order Punctuality
Production order chart combining columns and lines.
Displays columns for number of production orders delivered early, on time, and late by year. The end date of the production order determines the year (Completion Date/Planned Delivery Date).
Job shop domain information
100 | Infor LN Analytics Foundation for Birst User Guide
Also displays lines for time series (Year to Date, Quarter to Date, etc). The time series to show can be specified via an embedded filter.
Drill through: Standard drill map for time from Year to Date.
Button:
Details button to start dashboard Order Punctuality Details which has an embedded filter for Production Order and report Order Punctuality Details.
The report is a production order table chart that displays year, year/quarter, year/month, week start date, date, production order, on time, early, delivered early days, late, delivered late days.
Order Lead Time Embedded filters:
• Year
• Company
• Calculation Office
• Item
• Order Status, default is Production Completed, Completed, Closed, Archived
Report:
• Order Lead Time
Production order chart combining columns and a line.
Displays columns for planned throughput duration and actual throughput duration by year.
The end date of the production order determines the year (Completion Date/Planned Delivery Date).
Also displays a line for overrun (Year to Date, Quarter to Date, etc).
Button:
Details button to start dashboard Order Lead Time Details which has report Order Lead Time Details.
Report is a production order table chart that displays year, year/quarter, year/month, week start date, date, production order, planned throughput duration, actual throughput duration. Drill back to Infor LN is offered on the Production Order column.
Job shop domain information
Infor LN Analytics Foundation for Birst User Guide | 101
Reject by Reason Embedded filters:
• Year
• Company
• Order Status, default is Production Completed, Completed, Closed, Archived
Report:
• Reject by Reason
Production order pie chart.
Displays the production order count by reject reason.
No drill through/across is available.
Note: The Use Reason Codes for Rejected Items field can be set to Never, Optional or Mandatory in the Production Order Parameters (tisfc0500m000) session. If reject reasons are not specified in LN, the reject by reason pie chart will only show reason *.
Perfect Order by Year Embedded filters:
• Year
• Company
• Calculation Office
• Item
• Order Status, default is Production Completed, Completed, Closed, Archived
Report:
• Perfect Order by Year
Production order line chart.
Displays the perfect order and production order count measures by year.
The end date of the production order determines the year (Completion Date/Planned Delivery Date).
Drill through: Standard drill map for time from Year to Date.
Button:
Job shop domain information
102 | Infor LN Analytics Foundation for Birst User Guide
Details button drills across to dashboard Perfect Order Details which has filters on company, order status and year and report Perfect Order Details.
The report is a production order table chart that displays year, year/quarter, year/month, company, production order, perfect order count, production order count, perfect order ratio (perfect order count/production order count).
Operation Cost Variance Embedded filters:
• Year
• Company
• Work Center
• Calculation Office
• Item
• Order Status, default is Production Completed, Completed, Closed, Archived
Standard filters:
• Currency Type
Specify the currency type to use, default is reference currency.
• Currency
Available filters are Data Warehouse Currency, Local Currency, Reference Currency, Reporting Currency 1 and Reporting Currency 2.
Default is Reference Currency filtered on the first available reference currency. If you have multiple companies and use more than one reference currency, we recommend using a single Data Warehouse Currency across companies.
Report:
• Operation Cost Variance
Production operation line chart.
Displays cost variances for machine, labor, overhead and subcontracting by year. The end date of the production operation determines the year (Completion Date/Wait Start Date).
Drill through: Standard drill map for time from Year to Date.
Button:
Job shop domain information
Infor LN Analytics Foundation for Birst User Guide | 103
Details button drills across to the Operation Cost Variance Details dashboard which has filters on currency type, currency, order status, an embedded filter for Production Order and report Operation Cost Variance Details.
The report is a production operation line chart that displays the estimated and actual machine, labor, overhead and subcontracting costs by year. The end date of the production operation determines the year (Completion Date/Wait Start Date).
Operation Machine and Labor Time Embedded filters:
• Year
• Company
• Work Center
• Calculation Office
• Item
• Inventory Unit (default no filter)
• Order Status, default Production Completed, Completed, Closed, Archived
Reports:
• Operation Machine Time
Production operation chart combining columns and lines.
Displays columns for estimated and actual machine hours production by year. The end date of the production operation determines the year (Completion Date/Wait Start Date).
Also displays lines for estimated and actual machine hours set up by year. Note that LN has parameter 'Split Hours in Setup and Production'.
Drill through: Standard drill map for time from Year to Date.
• Operation Labor Time
Production operation chart combining columns and lines.
Displays columns for estimated and actual labor hours production by year. The end date of the production operation determines the year (Completion Date/Wait Start Date).
Also displays lines for estimated and actual labor hours setup by year. Note that LN has parameter 'Split Hours in Setup and Production'.
Drill through: Standard drill map for time from Year to Date.
Button:
Job shop domain information
104 | Infor LN Analytics Foundation for Birst User Guide
Details button starts the dashboard Operation Machine and Labor Time Details which has an embedded filter for Production Order and report Operation Machine and Labor Time Details.
The report is a production operation table chart that displays year, year/quarter, year/month, week start date, date, production order, operation, estimated and actual machine hours setup and production, estimated and actual man hours setup and production.
Material Cost Embedded filters:
• Year
• Company
• Work Center
• Calculation Office
• Item
Standard filters:
• Currency Type, default is Reference Currency
• Currency
Available filters are Data Warehouse Currency, Local Currency, Reference Currency, Reporting Currency 1 and Reporting Currency 2.
Default is Reference Currency filtered on the first available reference currency. If you have multiple companies and use more than one reference currency, we recommend using a single Data Warehouse Currency across companies.
Report:
• Material Cost
Production material bar chart.
Displays the estimated and actual amounts both customer-owned and company-owned by year. The end date of the production operation determines the year (Completion Date/Wait Start Date). If there is no operation, the end date of the production order determines the year (Completion Date/Planned Delivery Date).
Drill through: Standard drill map for time from Year to Date.
Button:
Job shop domain information
Infor LN Analytics Foundation for Birst User Guide | 105
Details button starts the Material Cost Details dashboard which has filters on currency type and currency, an embedded filter for Production Order and report Material Cost Details.
The report is a production material table chart that displays year, year/quarter, year/month, week end date, date, company production order, position, estimated and actual quantity, unit cost, amount company owned, cost customer owned.