I n j e c t i o n M o u l d i n g
o f S I L A S T I C ® L i q u i d
S i l i c o n e R u b b e r
T e c h n i c a l S e r v i c e & D e v e l o p m e n t
AV
0249
6
Rubber FabricationSolutions
����������� � ����������� ��������������������� ����������������
�
���������������� ������ �!�"���#�$������%�&���&��'� #�
���������
�(�" ")&� ��������� *�� ���� �� ����� � &������� ������&� �&�
���*���� �����"&����)� �*!��"��#� +��� ��"&�� ��� �%�&� �&� �%��
�����"&� � !����*"���� �������*���&� �� �%�� ����&%� � "������&#� ���
" ������ *��� "� � *��� !� ����&� �� ������� !"��&� "��� &������
�������&�����%��%��%���'�����"��*"����"� �!� ����'��)#�
�
,%�� "�*� �� �%�&� ���%���� �&� �� ����&��"��� �� )�� �%�� �"&��&� ��
���������
��������� ������������������*�� ���#�
,%�� ������� ����� �&� �%"!���&� ��-�.� *"����"�� !�!�����&�� *�� �
�&���� "� � !� �����#� ,%�� �%"!���� �� ���� �� ����� &%�� �
%��!� )�� �� &�'�� !����*&� ������ �%�� !� ������ "&� ����� "&�
��� ���� &�����&� ��� !����*&� �%��� �%�)� "!!�"�� "� � !��'����
�%�*�����%��������#�
�
/�� ����%��� ����*"���� ���������� ��������� ����� � ��������
�������� !��"&�� �&�� �%�� 0���������
����� ����� �� ������
������� �������#�
,%�� ��������� ������� � ����� ������ �!"��*���� "� � )���
��"��&��� �� ���������� �������� � ��-�� ��&�!!���)�����
)��%"'������%������&���&.�
�
�
�
�
�
�
�
�
����������� � ����������� ��������������������� ����������������
�
�
������ �� ���
������� ��������������������������������������������������������������������������������������������������
������������������������������������ ������������������������������������������������������
������������������������������������������������������������������������������������������������������������� ��������� �� ������������������������������������������������������������������������������������
���������������������������������������� ������������������������������������������������
����������������������������������������������������������������������������������������������������
������������������������������ ����������������������� �������������������������������� ���� �������������������������������������������������������������������������������������������������������� � ������������������������������������������������������������������������������������������������������� ���������� ���������������������������������������������������������������������������������������������� ������ ���������������������������������������������������������������������������������������������������� �������� �� ���������������������������������������������������������������������������������������� ���������������������������������������������������������������������������������������������������� � �������������������������������������������������������������������������������������������������������� �� � ������������������������������������������������������������������������������������������������������!��"��������� ����������������������������������������������������������������������������������������������� ��!���� ������������������� ����������������������������������������������������������������������������� � ����������������������������������������������������������������������������������������������
�������������� ���������������������������� ���������������������������������������������� "��� ����������������������������������������������������������������������������������������������������� ��� �������������������������������������������������������������������������������������������������� � �������������������������������������������������������������������������������������������������������� ���� � ������������������������������������������������������������������������������������������� �#��� �����$������������#� ������������������������������������������������������������������������������ �� ��������������������������������������������������������������������������������������������� �����������% �� �����������������������������������������������������������������������������������&�#�������������� ������������������������������������������������������������������������������������
������������� ������ �����������������������������������������������������������������������������#� ��%���� ����������������������������������������������������������������������������������������������� ��' � ���������������������������������������������������������������������������������������������������� ��� �����������������������������������������������������������������������������������������������
���������������� �������������������� �������������������������������������������������&(����#���������� ������ � ���������������������������������������������������������������������� ������ �����)����#��������������������� ������������������������������������
����������������������� ����������������������������������������������������������������������&�#������������������������������������������������������������������������������������������������������� ������"�����%�( �����������������������������������������������������������������������������( ����)���������� ���������� ��������������������������������������������������������������������� ��& #� ��������������������������������������������������������������������������������������������� �#��� ������������������������������������������������������������������������������������������������������ ��$��������*'�������������������������������������������������������������������������
������������������������������� ����������������������� ����������������������������
����������� ����������� ��������������������� ����������������
�
� � � 1�
�������������������������������������
�����!� �����"#�"�������������� �����������������"&�!������ ��)��
��� ������ "� � ���� ��� � �� �%�� ������� �"����"����
*"�-��!�"�������%���"���&�'�����&#�
, ")��%��!���&&����"� �!� ����" '"��"��&���������������
"����2!���� ����*"�)��2�&�����"� �����"!!���"���&#�$���" �
!� ���� ����� �&� "'"��"���� ��%� ��� �����"�� "!!���"���&� "� �
����"��������������3&��"���� ����&!��������������*���&#�
�
$�%��!�&��������� �������������� ���3&� "��� ����� &� ���%� '�&�&����&� �%"�� '"�)� ��*�
�"&��)�!��"������!"&��&#�,%�&������*!�����*"����"�&�"���
*&��)� �&� � ��� "� �� �� �� �"��� "� � ��&�&�� �� !)&��2"���
!�)*��&� �� �!�)*��&� �%��%� "��� '���"��&� � �)�
!�)" ����#�
�
���'"��!����("���,%�� ��� ������ "!!���"���� ���%���)� "� � �%�� ��&�*���
&��'���� ������&� !�'� �� �%�� ����� ���%���"�� "� � &"��&� &�!!���
��� � ��������������������&����&&����)#�
�
���)� " ��������������� ���������������&�"���&�!!��� �"&� ���*"��%� �
-��&� ������������� ��*&������������!"��&#�,%���2"���!"�-"�����
����%�� �&� '"�)�� �!�� ���� �� �%�� ��&��)� �� �%�� !� ���#�
/�� ��"��� � ����*"���� !��"&�� ������ �� �%�� �� �'� �"�� "�"�
&%���#�
�
���*!���"����+����� ��4%��� &��� � "�� �� ����� 1�5 � ��� �%�� �����"�� ��!��� �
���"����&�� ��� ������ ����� ��"�"����� �%�� �&"���� ����� ��
�%�&��!� ���&������� �%�� "��� �� ��"�� ��� �%��!"�-"�����"� �
�%�)������%"'��"��&"�����������"����"&��6�*��%&��%���&%�!!� #�
,%�&� "��� �&� &%��� �)� �%�� ������&� 0789:� ;*�"����� �2!���<�
����� ��)����� ����&���%��%�&�"� �����%��*��%�;�"&�� ")<�
"� �)�"�<#�
72"*!���0789:��1=���*�"�&��&���)�"��%�1�������#�
�
��+!" �
�����,�"��
$� !� ���� &"���)� "�"� &%���� &%�� � ��� ��"��� � ��*� )���
��"��&����� ������&"��&�������!�������&�#�
�����������>�����%"� �������" �!� ��������*"�����!� ����
&"���)� "�"� &%���� "� � ���"����� �"���&� ��� &"��� �� � �&�� "� �
!%)&��"��"� =��%�"��%�%"?"� �����*"���#�
�
�
����������� ����������� ��������������������� ����������������
�
� � � @�
�
�����������������������������������������
��
�
�
�
�
�
�
�
�
�
�
�
�
��"�"#!���+(��� ������++"�"��,���
• ������� ��*!&�����!� ���&�;����-��!��2� �&<�• ����!������"���*���*!��"�����)���'��)��"&��'���"��&"����"�'���A�5 �;&�"� "� �������������<�
�
���'! "��!��+(��� �������� ������
• �"&)�*�2����"� �!���&&����'��&�&�����������B ���"!� �
����
• ����)��*!�� � ����" )���!���&&�• �"&��)�!��*���� ��!�'� ������ �!� �������2������)�• "��*"�� ����������*�� ����!���&&�&�*��"�����%��*!�"&�������������*�� ����
• �"&)� �*�� �������%�� �%����"��• '��)�&%���"� �%��%�)�!� ����'���)������*�&�• ��"&%��&&�*�� �������%����%��!"���&�?������"����������• !&������������������)������� � �• � � �������� ������&!���������&�����*!����&�• &�!�������"���)�"&������"&���� ���"� ������"���"&���• �&"���� '��� "� �� �� ��*!��"����� �"���� ��*� C6�5 � ��D���5 �
• � ���"&����!�!�����&�• '��)�� �EF�"� �?�����&�&�"����"&������"&�"�*&!%�����"������&�"�����)�
• ���*�&�����!��-C�!�"� ���&�&�"�����*"�)�&�'���&�• '��)�� ������&�&�"������&!���"����������
�C�)!�&�
• � � ����������!�!�����&�'���"��� ����*!��"������"�����
�
����������� ����������� ��������������������� ����������������
�
� � � A�
�������������
��
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�##!"���"�������� ������������������3&� "����� ��)��&� � ��� ���������*�� ����� �"�����
�"������ �!!����"� ��2���&����"�����!���&&�&#�
$!!���"���&� "��� '��)� ��*���&� ����� ���� �%�� "��*��'���
"��&!"���� "!!��"����� ��&���&&� *"�%����� ��������"�� "� �
��&�*��&��� �&����&#�
�
�+�������-"�'���� ������ ���"��� �������� ���� ��" �&� �*!�)� ���%� /�$� � �
�����"������� /���GG#�6���"� �>�FF�;��*���)�>H$<�8F�
�%����������)�!���&&� #�
�
�.��,�"��+��!�����.�"!�����" ������ ���������������&�"���'��)�&���� ����%�&��!���&&�&����
��"&�&��.�
• &�'�����&&����%����"� �'��&"�����'�&�&��)�• �"&)�*�2����"� �!��*���"����• �"!� � !���&&���� �*!"�� � �� &�'���� �&!��&��&� "� ��&�"��)� "���&� "� �*!����� �"����� �� ��� "!!��� � ��� "�
&������!"&&�
• !��*����&&�" %�&�������"&&�"� �����"����%���&��&��"��&��
����� *�2� � �������� ���� �"�� ��� �!� �"�� � �� �� � �� "�
��&&%�" � ��� &�!!��� � �2���&��� �"����#� ��"� "� �
���%�����&�"����&� ������"����2������"����#�
�
�" &��" ���� ������,%�&� �&� ��&�� ������%���������
�� �98� ��&&���-"���� !��*����
*"&�����"��%�&#�/���� ��"��&�"���"'"��"������*���� �����#�
�
�
����������� ����������� ��������������������� ����������������
� � � 6�
������������������������������ ������������������������
�"���"�%���
��� ������
��-�� *"�)� !�)*��&�� ��������� ���� �&� "� &%�"�� �%�������
*"����"�#�,%�&�*�"�&��%"����&�'�&�&��)� �!�� &�%��%�)����%��
&%�"���"����"&��%��&%�"���"�����&�&���%��!� �������*�&������
���'�&�&��)#�
,%�&� ������� �&� �"'��"���� ��� �%�� ���������*�� ����!���&&��
"&��'���"������&����%�"�'��)�%��%��=���"����"���������� ����%�
������������!��&&���#�
�
�
+$,-.
+$,-/
+$,-0
+$,-1
+$*-. +$*-+ +$,-- +$,-+ +$,-.
�����������γ�2�*+3
� ���� ��� η�2���3
4.5-6/-�$
4.5-61-�$
4.5-67-�$
8/*//1+
��
����
��#��
���
�
,%�� �"��"*� &%�&� �)!��"�� '�&�&��)� '��&�&� &%�"�� �"���
���"���&%�!&���&*���������������� ���������������&#�,%�&��
������&������*�"&��� ���"����=!�"���'�&�*�����"���A5 #�
,%�� ��������"��)� �� ����'�� �������� ���� I1C11A�� %"&� "�
%��%���'�&�&��)� "�� ���&%�"�� �"��&� �%"�� �%�� &�"� "� ���������
���#�B��'���� "�� &%�"�� �"��&� ��������� ������ �%�� ���������
*�� ����!���&&����&�'�&�&��)��&�������%"���%���%��&#�
,%�������� ��� �"���� ����&&"���)� �2��"!�"��� ��*� �%��
'�&�&��)� "�� ��� &%�"�� �� �%�� "���"�� '�&�&��)� ������ �%��
��������� !���&&#�,%��%� �%�&�*"����"�� �"����)����*����� �
���%� "� %��%� ��&�*!���� �� �����)� �%�� ��������� !��&&����
&%�� �%��'������-�!���"���)�������� �����"'� ���"&%#�
�
�
�
�
����������� ����������� ��������������������� ����������������
� � � G�
� ,%��&%�"���"��&��%��%������ �������%��!���&&�"���&%������
�%���������� �"��"*.�
�
�
+ $ , - -
+ $ , - +
+ $ , - .
+ $ , - /
+ $ , - 0
+ $ * - + + $ , - - + $ , - + + $ , - . + $ , - / + $ , - 0
��#�6� ��� ����� ��' � ����6��� ��
�����������2+6�3
� ���� ���2���3
9 !
��
�
��
�
�
�
�
�
�
�
�/���"��
,%��&%�"������"��&�"���%��%�&��"���%���"��&�"� �����%���"'����&�
���%�'"���&��"�������!�����J���C@��=&#�F�&�&��)�%�����&������
�����������*�&�������%"������%��!�*!&#�
,%�&�� �2���*��)� ��� '�&�&����&� "���� �%�� �������� ���� ��
��"�%� �'��� �%�� &*"���&�� �"!� ������ �%�� ��������� !���&&#�
,%������������&�!"������"��)��*!��"����%"���%����&����������
�%��*�� ��&� �&���� �"��� �������%�&���������"#�$���'�������
�%"����&����%����"!&����%�*����%���ACG#A�K*��������&�������
��"&%����%��"������#�
�
,%�����������!��&&���� �!�� &�*"���)����%����*���)����%��
������#������*"��)��"���&���*�������� #�
$� �������� ��*�� ��*� ����� �������� �"�� ��� �"-��� "&� "��
"!!�2�*"���'"�������������������#�
$�� �%�������������� �%�����������!���&&��%�����������&!�� �
!������&%�� ����!���"**� ����&��%�"��")��%"���%��'��*��
���� �&� %��%� ����%� ��� �%�� ����� � �������� ������� ��� ��
��������'���"��&���������%���"'��)��&������ ������ �����"'� �
&���%����%��*"����"�#�
�
�
�
Dow Corning Injection Moulding of Silastic® Liquid Silicone Rubber
8
Holding Pressure
Material Cushion
The switch over to holding pressure is best adjusted
according to distance or volume.
In contrast to thermoplastic injection moulding, holding
pressure with Silastic LSR injection moulding does not serve
the function to counteract shrinkage caused by the cooling
down of the melt in the cavity. Its function, however, is to
provide the necessary counter pressure to avoid that the
Silastic LSR, which expands upon rising temperatures, is
being pushed out of the cavity.
Normally 1-4 seconds is sufficient until the silicone is cured
at the gate and can therefore not flow back.
To avoid over loading, it is advisable to drive the material
cushion towards zero.
Injection Speed Profile
0
10
20
30
40
50
60
0 0,5 1 1,5
Injection Time [s]
Inje
ction V
elo
city
[cm
³/s]
Pressure in the Mold
0
50
100
150
200
0 2 4 6 8 10Time [s]
Pre
ssure
[bar]
Cavity
Runner
Pressure in the
Cavity
Cavity pressure increases gradually as the injected silicone
expands upon rising temperature.
This rising pressure caused by the heat expansion occurs
earlier than the vulcanisation. Due to this effect, even shortly
after the filling process, the material can be pressed into small
gaps as it is not sufficiently vulcanised in the outer layer. If
the cavity is filled precisely with a volume of 98-99 %, the
remaining filling of the cavity is brought about by the
expansion of the material in the hot mould. Since the cavity
pressure does not rise so high compared to when a cavity is
filled 100 % before thermal expansion, flash can thereby be
prevented.
This precise filling requires a perfect handling of the injection
moulding machine. The complete machine movements must
be identically repeated again and again with a high precision.
Cavity pressure commonly measures up to 300 bar.
Injection Curing
����������� ����������� ��������������������� ����������������
� � � ��
����"�!��,##!%��
�
�
�
�
�
�
�
�
"." ��
�
���" �
�
��
����)������,���
,%�� ������������ ���� �*!����&� "��� ���'��� � "�� "� �"�����
��� �� ��� ��*� ���� ������ ��*&� �� ��� ������ !"��&� �)�
%) �"����"��)� �� !���*"���"��)� ��'��� ����!��"����� !�*!&�
�%���%����2�����!�!�&���"�&�"����*�2��#�B�����%��!��&&�������
�%���������������*�"&���&��A�C�����"�#�$�&���#AC6�L������
" ���'���"�����" � �"���%�&�!���#�
��� *��� �%"�� ��� ����� �&� ���������)� �&� � �� �%�� &"*��
*"�%������ ���*��� �%"������������������� �&�������&�!!��� �
��*� �%�� &"*�� !�*!�� ����%��� " ���'�� !�*!&� �"�� ��� ���-� �
�!#�
�
,%�� ��� *"��� �*!����&� "� � !&&���)� "�� " ���'�� "���
���'��� � �%���%� "� &�"���� *�2���� �%��%� �&� "� !�!�� ���%�
&�"����� � *�2���� '"��&� ��&� �� "� � %����� "�*&��
%*�����&�)�*�2� #�
�
,%��!��&&������ �%��*"����"�� ���'��� � �%���%� �%��!�*!&� �&�
�� ��� � �� 1�CG�� �"�� ������ ��� ��"�%�&� �%�� ��������� �����
�%��%� %"&� ����� �'��!� � &!���"��)� ��� ����� � ��������
����������������*�� ���#�
,%�� ��������� ����� ����� %"&� ��&�� ��� ��� ���� &����� ���
!���&&���� �������� ���#� ,%�&� *�"�&�� �%�� !�!����� ��
�*!��&&��� �&� �.�#� ,� ��"�"����� "�� !��*"��*�2���� �� �%��
*"����"���&*���*�&���� ����&����&����%�"��" ����"��*�2����
����� ��� �%�� *�������� ?��� "��� �*!�)� #� �*�� &!���"��
*"�%���&� �&�� "� )�"*��� *�2��� �*���� � ���%� "�� ���������
!�&����� &���%��*"����"�#�
�!���"�� "�������� &%�� ������'��� �� �%����C�������'"�'�#� ���
*�&�� ��� ����!!� � ���%� "�� �2"��� "� � ��!� ������� ��&����
*��%"��&*���"'� �'"��"���&�����%�����"��'��*���"�&� ��)�
��"-"������#�
�������%��'��)����'�&�&��)�"&��*!"�� ����%��%��*!�"&����
*���&�� &�"� "� � ��C������� '"�'�&� "��� ����� �� ������ "� � �
��� "��")&� ��&�� �**� �"���)� �%��� �%�� &����� �����&� �%��
��������� !���&&#�H � ��&���&� �"�� ��� "�%��'� ����%� &!�����
�" � �����&������%�&��%���C�������'"�'�&��%��%�%"'��'��)�
&*"�����&���� �&�"���&�����%��!"������"��"!!���"���#�
�
,%�� &����&!�� �&%�� �����%&������&��%�"�*"������%"����.�
• �&����!������%���)������*���• �&���������"&���%����*!��"��������%���������������"� �
�%����)��"�&��!"���"��������#�
�
,%��&!��������"�-�!��&&����&%�� ����" ��&�� ���AC1���"�#�
�
�
�
�
�
����������� ����������� ��������������������� ����������������
� � � ���
�,�" ���'�(",��
����� �������
�
�
�
���������������������������������������������������������������
���������−−−−�−−−−���������−−−−�−−−−��������������������������������������� ������− − − − ���������������������������������
���������−−−−�−−−−���������−−−−�−−−−�����������������������������������������������������������������������
���������������������������������
�������������� �������������
���������������� ��� ��� ����������
��������������������
�������������������������������������� ������� ��������
�������������������
���������������� ��� ��� ����������
��������������������
�������������
�������������� �������������
����������������
��� ��� ���������� ��������������������
��������������������������������������
������������ �������������������
���������������� ��� ��� ����������
��������������������
�������������
����
"�"�)&�
������������������������������������������������
�������−−−−�−−−−���������−−−−�−−−−�������������������
������− − − − ��������������������������
�������−−−−�−−−−���������−−−−�−−−−���������������������������������������������������
�������������������������������
�
�
�
�
��)C�����%)�C
���2"��
�
�
F��)��"� �%) ������������"��!�)&��2"��&�"������� ��&����
"�!�"����*��"�"�)&�#�,%�&���"�����!���� &�"���*���*!��"C
��������� �&�"������"�� ��"!� �)��)������"&�����%����*!��"����#�
$�*�2� ����������������%���&��� �"���*���*!��"������%"&�
"�*���*�*��&"�����*��;!�����<���1� ")&#�
�
4%����%�����������"������ �����������������&�*�"&��� ���
"� �%�*�����������"��&� �%�� ������"&�"� ���������� �%�� ��&��
��*�#�
,%�� �"��"*� &%�&� �%�� '"���&� &�"��&� �� ����#� ��� �%��
����������� �%��&"*!����&�*"���)�!�"&����"� �&%�&�'��)��������
��&�&�"���� �� �%�� ���*"���� �"�&� � �)� �%�� ��&�����
����!*���#�4%����%������� ���������������������&���" !��
�%��%�"���� �%���%"*����� �%�� �����������&� �� ��&�� ������%��
�������������%��'���"��&"���#�
�
������������������ ���
-
.
0
7
5
+-
+.
+0
+7
+5
- + . / 0 1 7 :& #��2# 3
���������( ���� �����+.-;�
&��<���2�=#3
4.5-61-$
4:5-61-$
�
� ,%�� �&���"���� , � �� &%�&� �%�� ��*�� "���%��%� ��L� �� �%��
*"2�*�*��������&���"�%� � �������%����&�#�,%�&�, ���'"����
��'�&�"���� ��"�������%����%���������&�"��&#�
,%��, ����'"���� �&� �*!��"��#�B��������L��� �%��*"2�*�*�
���L� ��� �
����������� ����������� ��������������������� ����������������
� � � ���
������ �&� ��"�%� � "� � "&� �%�� ������� �&� &� �"�� " '"��� � �%"��
������ �%�� ���&�� �� "�� ��������� *�� ���� !���&&�
�*�� �����&�!&&����#�
� $�� �A5 � ��� �"-�&� &�'��"�� ���-&� ������ �%�� *"����"�� �&�
�*!�����)� '���"��&� �� "�� ��*!��"����&� "�'�� ���5 ��
%��'�����%�&���"������"-�&���)�"�����&��� &#�
�
� ���������������� ������������������ ��
+
+-
+--
+.- +0- +7- +5- .-- ..- ��
� $�� *�� � ��*!��"����&� �������� �G�� "� � ���5 �� ����� ��������������������&�"��'��)��"&��&!�� �"� ���&���&����"�%��%�)�
!� ����'��!���&&#�
�
,%�� '���"��&"���� &!�� � �� �������� ���� �!�� &� �� ����
*"����"���&.�
• ��*!��"�������*�� ����*!��"�������!&&�������&���&�• ��*!��"��������%����������������!����"�%�����%���"'��)�
• ��*���)� �� "�������� ���"���� �������� &���"��� "��"� "� �'��*��
• �����"��'���"��&"������%"'����"� ��%���%�*�&��)����%���������;&���"�&�!"�����<�
�
,��"�&���%��!� ����'��)����%�����������*�� �����)����"� �
&%�������� �%�� �)���� ��*��� ��� �� �%�� �������� !&&��������&�
�"�����&������ .�
• �����"&���%��*�� ���*!��"�����• !���%�"�����������������"�����"� ��� ����������@�C��5 �
����������� ����������� ��������������������� ����������������
� � � ���
���%��%���&����"���*!��"��������������
�&����"��"&����*"����"����-�������������G��=22�7�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�����,�" ��
�
�
�
�� ������ �� !!"#�!� �$%�
��"������� ���"���
��≈���C���������=*����
9��%�"����� �� �%�� &��������%��%� �&� "���� �� ��� ������� � �"��
��)� ��� ���**�� � � ��� ����)� "��*"�� � !���&&�&� ������
�%��%� �"����� ���*&� ���%� "� &*"��� &���"��C'��*�� �"��� "���
������!� ��� #�
�
��� �%��*"�%���� �&� �������!�� � ��� ��&� �)����� &%���)� "�����"� &�
�%�� ������ &)&��*�*�&�� ��� "���'"�� � �� !��'���� "� ���������
�%��*"����"�#�
�
$���%�&�!��������&��*!��"����������%"���%��'���"��&"������*��
�&����������%�� ���&�'���"��������%���)������*�#�
,%�� �*�� �������%��"�����������&*�� �������"&��������%��
&"����� �%������� ��������������������%������������"������
�&� ����� "� *��%� �"����� ��*�� �"���#� ��� "� *�� � ���%� "� %��%�
��*�������"'����&��&�������������%��%�"&�&���������*&���� �
��)� ��� � "� &%��� '���"��&"���� ��*��� ��� �&� !&&����� �%"�� �%��
&���� ����� �"���� �" � �%�� ����&&"�)� &%�� '��*�� �"&��
����%#�,%����)��%�� &������*��!����&��%���)���#�
,� "�%��'�� �%�� %��%�&�� !&&����� !� ����'��)�� �%�� �%���
*"�%����)� *�&�� ��� " ��&�� � '��)� !����&��)#� B��'���� �%��
��*�&� ���!���&&�&��%��%��&�� �%��"������������� �%��"������&�
&%�� �������&�&%���� �%"�� �%��*"�%����"���'"��&� �%��*�� �
!��������"���" )�"�����'��)������)���&����"�&�����"���!"��&�
%" ������������ #�
�
,�!�� ����*���� ��� �%��!�"������&�"��� �%��������� ��*����"��
"�������� ��� *"�)� �"&�&� ��� �"�� �"����"��� ���%� "� ��"��
'���"��&"������*����&�'����())#�
,%�&��"�������*�&��"��������%��������!"����%��-��&&#����
!����&�� �"����"���&� �"�� ���*" �����%� �%�� %��!� �� �*!�����
&���"���&�*��"���#�
�
��� �%�� ����&%� � "������&�*�&��*���� ����"��� ��� �����&� &��%� "&�
>�FF� �� /�$�� !&�� ������� �&� "�&�����)� �&&����"�#� B�����
'�"����&��&�"!����*��%��*�� � �!"��#�
+������ !"������"��)� %��%� *��%"���"�� �%"�"�����&���&� "���
������� � ��*� �%�� &������� ������� "� � &*�� �� �%�&�� �"�� ���
�*!�'� ��)�!&��������#�
$� �)!��"�� !&�� ������� !���&&� �"-�&� !�"��� "�� *+�� �,� � ��
!� �����-�&��� �����"��'������%����&%�"���&�!!�)#���!�� ����
�� �%�� ������� � ����&%� � "������� !�!�����&�� !&�� ������� ��*�&�
"� ���*!��"����&�*")������ ��� #�,���������%���������*���&���
>�FF����%� ��&!���� ��'�"������������� �%��!&���������&%�� �
���" ��&�� ��)��2!���*���"�����"�&#�
�
����������� ����������� ��������������������� ����������������
� � � �1�
�������������� �����������������������������
��
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�'�")� ��
�
,%�� �&���������������*�� &��������� �����������������&�
�����"��)� &!�"-���� &�*��"�� �� �%�� �&���� �� *�� &� ���
�%��*!�"&���#� (�'���%���&&�� "� ���� �*!��"��� ���������&� ��
�%����%"'�������������������&%�� ������� #�
���� �� �%�� ���"��'��)� ��� '�&�&��)� �� �%�� ������������� �%��
����������*�&����%���"'��)�"���'��)�&%����'���"��������������
!��&&���&#����� �����"'� �"�������"!*���&��"�� �'���������
�%��*�� ��&�����&&"�)#�
�������� ���� �&� ��� &%���-� ��� �%�� *�� � ��-�� "�
�%��*!�"&����*"����"�#�,%������� �����������������2!"� &�
��� �%�� %�� *�� #� ,%�������� �%�� "������&� � ��� ����&&"���)�
��*"�����"�������*��������"��)����%��!&���'��&� �����%��
*�� � "&� �&��� #� E&�"��)�� �%�� "������&� ��*"��� ��� �%�� �"'��)�
%"������%��%���"�����&���"���"��"#�
�
7'��� ��� �%�� "������&� � ��� &%���-� ��� �%�� *�� �� �%�)� �����
&%���-�"�����#AC1�L�"������%�� �*�� ����"� ��%����������
������!���&&#�
�
���������������������!
->5.1
->5:1
->4.1
->4:1
+>-.1
1- +-- +1- .-- .1-
&�#���������2;�3
����?����#�� 2�#@6�3 +�A��
.--�A��
0--�A��
7--�A��
5--�A��
�"���#��$��������!
+
.
/
0
1
+0- +7- +5- .-- ..-
&�#���������2;�3
��� "����2B3
.--�A��
�
� ,%�&�&%���-"��� �!�� &���&�'��"���"���&.�
• �����*!��"�����"� � �*�� ������*!��"�����• !��&&��������%���"'��)�"� ���&�������)��%���*!��&&������%��*"����"�&�
• ��"������ ���������!���� ;&%���-"��� ��� �%�� �����������%�� *"����"�� ���� �&� �&�"��)� &*��%"�� %��%��� �%"��
!��!�� ����"�����%�� �������������<�
• �%�� �*��&��� �� �%�� !"��� ;�%�� &%���-"��� �� �%��-���"������&��&�������%"�����%������"������&<�
• !&�� ������� �%�� "������� �"�&�&� " ����"�� &%���-"��� ��"�����#AC�#G�L�
�
�
�
�
����������� ����������� ��������������������� ����������������
� � � �@�
����" ��"�� ,%�� ���&���"���� �%�� ��"������ �%��!"������ ����� �&������
�%�����&��&��!&� �������%�� �'��!*�������%�����������*�� #�
,%�� '�������� �%��%� �&� ����&&"�)� ��� �%�� *"����"�� �����
�������&� �%���%� '������� �%"����&� �%��%� "��� ��&���� � ����
�%�� !"������ ����#� ��� &%�� � �%������� ��� ��"�� � ��� �%�� "��"�
�%��%� �%�� *"����"�� ��"�%�&� �"&�#� ��� �%�&� *"����� "���
����"!*���&� "��� "'� � � "� � �%��*��%"���"�� &������%� �� �%��
"������&��&������ ��� �"�����%����� �����#�
+�� �%�� *�� � � "������� �%�� &�!"�"���� ��*� �%�� *�� � �&�
"��")&� ������&"���� �"�����#�,%�&�"��"� �&�'��)�&��&���'�� ���
���%�����'�&�&��)��� �%��������������"� ��"���"&��)�������
"������"&%#�
��*�� ���� �� �%�� "������&� "�� "� �"���� !���� ��� ��*�� �&�
��������� � �)� �%�� ��*���)� �� �%�� !"��� "� � ��"���� �� �%��
!"����������#�E� ������&�%�����"����&�������"���&�&�����"������)�
���%��!"������%�� �&��� ��"'��)�%"��#�
�
���" �
�
,%��"����%��%��&�����&� �����%���"'��)��&����&���*!��&&� ��)�
�%�� ������� � �������� ���� "� � �%"�� �2!���� � �%���%� �%��
'������� �%"����&#� ��� �%�� "��� �"�� ��� �&�"!�� �������)�� "���
����"!*���&� ��� �%�� "������� ����� �%��%� �"�� ����� ���
������&� ��)�"��%����� ���"�����%��"������#�
�
�!���"��'��������%"����&����%��C1�**��� �%�"� ��#��@C�#��A�
**� �!�%� "��� ��&���� � ���� �%�� !"������ ����� &� �%�� "��� �"��
�&�"!�#�
+!��*�*�'��������&����"�� ��)�"�'"���*#�,�!� ����&��%�"�
'"���*���%��*�� �&�!&� �������%����&����*'�*����"���#AC
��**�����������&��*!�����)���&� #�$��"&-����&������������%��
!"������ ������ &� "� '"���*� !�*!� �"�� �"�� �%�� "��� ��*� �%��
�"'����&#�+��)��%����%��'"���*�%"&���"�%� �"�����"����� ��� �
!��&&������ "� ��*���)����%"&� �*�� �� ��&� ����&%�� �%��*"�%����
��&�&� �%�� *�� � �*!�����)� "� � �%�� ��������� !���&&� �&�
&�"��� #�
�
�*��* ���� ���������*�� ����*"�%���&� "���� !��"�����
���%� ��������� ��"*!���� ����&#� B���� �%�� *�� � �&� %�� �
����%������%��������������� �%���"'����&�"�����C�A�L������ #�
,%�� "��� �"�� �%����)� ������� �&�"!�� �%���%� �%�� !"������ ����#�
,%���&����%�������%��%��%�������&&"�)���"*!���������"'� &�
��"&%��"�&� ��)��%���2!"� ����&������#�
�
�/���"��"���
��
�
�
�
�
,%�� �)!�� �� �"��� �!�� &� �� "� ��*���� �� �"���&#� E&���� "�
&)&��*� �� �� � ������&� �2!���� �%�� ���%���"�� " '"��"��&� ��
��������� ���� �� "� *"2�*�*#� ��� �%�&� *"����� �%�� %��%�&��
!&&�����!� ����'��)� �&� "�%��'� #�,%��"�*� �&� ��!� ���� �%��
"������&����&��%�"�*"������%"����&!������� &��������*'� #�
$�'��)��"���������&�'������-����!���&&��&�"'� � �"� �
&*���*�&���&� ��"����&"'���&����*"����"���"�����*" �#�
����������� ����������� ��������������������� ����������������
� � � �A�
� �)� ����%���!
.-*/-; 01
;
->.*->1
��
�
�
�
������%��-��� �����.���
�� � %�������!������
∆,�≅�∆�6Cρ�����D��
" ������������
���� #������$
�����������������
����������%
��� ������� ����� �������
� � ��� ����� � ������ ���
��&���� ���������������%
∆!� �����������������
ρ� ������$������������
��!� �����������$��������
���
�
���*"�)��"&�&��%�&�"�&���" &���"��� ���������%���)������*�#�
,%����"����??��&��%��%�"���!��� �"� ���&� ����%��%��%��!�
�� "� ��� ��#� ,%�&�� ��� ��&� &%��� ��� �??��&��%��%� "��� ������
���� �%�� *�� � �� ��� &*�� &!���"�� �"&�&� "��� ��2� � �� �%��
��������� �"����� ��&��" � �� �%�� &�"� "� � �??��#� (�" ")&�
!���*"���"��)� ������� � ��� ��� &%��� ��� �??��&� �"�� ���
��"��� � "&� "� &�"� "� �*�� � !"��� "� � "&� &��%� �"�� ��� ������
���� '"���&� !&����&� �� �%�� ��������� *�� � �)� �%��
��*"-��#�
�*�� *�� *"-��&� "��� &!���"��&� � ��� �%�� �'��!*���� ��
!��� �� � ������� &)&��*&#����� �� �%���� &*"��� &�?��� �%��!���
�� � ������� &)&��*&� *"-�&� ��� !&&����� �%"�� '��)� *"�)�
���������!���&��"� � �%����)��"'����&���"�����"!!��� ����'��)�
��*��� �&!"��#�
,%�&� ���%���)� "�&� ��"���&� �%�� !� ������� �'��� �� &*"���
��������� *�� ���� *"�%���&�� �� �"���� ��*���&� �� "������&�
�%��%�"�����%��%���"���)�"� ��%������&!�����"������ &������
&�!"�"�� #�
���&��%��� ��������&)&��*&�"����*!�)� ��"������������&�!"C
�"���� �� ��*!��"����� �������� �%�� %�� �"'��)� "� � �%�� �� �
��������&�����&&"�)#�����%�&��&�����%���"&����%��*"����"��*��%��
�����������������%���� ���������&���%�#�/���%��*��������%��
������ �&� �� &������ ��*��%� %�"�� �&� �"��� ��*� �%�� %��
*�� �����%�����������%���"���&��%"������%�&�"��"��%������� �
��������������� �&���������&����������)#���� �%��"������&�"���
������� ����"�*�����'�����"��&!�������-��&��*"�����������
�"���� &*"��� �"*����&� &%�� � "��")&� ��� &������ � ��� �%��
����������"&� ��� �%�&�� "��"&� �%��*"����"����%��%� �&��2���*��)�
��� ��� '�&�&��)�� �"�� ���� �"&��)#� ,%�� �"*����� �� �%�� ��� �
!�����&����������#��"� ��#A�**#�
��� �&� �*!��"��� �� �"�"���� �%�� �")��� �� �%�� �%��� �������
&)&��*� ��� &��%� "� *"����� �%"�� "��� �"'����&� "��� ����� � �'���)#�
/�������&�� ��&��"������&� ��������*��%�&�����*"���������
�"�� �&�� �������� &�*��"���� &���"��� �� �&���� �%�� �������
�������%�� �'��!*�������%��*�� #�
�
��&,!+" ��+�
�/������%���&��
�������%���"����%"��'���"��&� ������ �&�������������&�&���-���
*��"����� &���"��&� "� � �%"�� �%�� *�� � � !"��� �&� ���2������ �%��
�*�� ���� �� ���������*�� � � "������&� �&� ��� !"������"��)�
�"&)#�
,%�� %��%� %�� ��"�� ��&�&�"���� �� ��������� ����� � ��������
�������*"-�&� ��� !&&����� �� �*�� � �'���"������&����%�����
�� �����&����%��� "*"��#�
,%�� �*�� �������%�����&�*&��������*!�)� �"��.�
• &���!!���!�"���• �������!���• "���������• ������&���!�• �"�C���!�"���
Dow Corning Injection Moulding of Silastic® Liquid Silicone Rubber
16
• robotic handling
When ejector systems are used, compliance with exact
tolerances must also be paid close attention. If there is too
much clearance between ejector pin and bushing guide or this
has been enlarged by wear over the production time, flash
must be expected.
Good results are achieved with reverse tapered or mushroom
shaped ejectors where improved sealing effect is favoured by
a heightened contact pressure.
Mushroom shaped and tapered ejector pin:
Ejector
Aireject
Pin
Aireject
Cavity
Cavity
Mould
Materials
During the development
process of moulds for highly
abrasive materials, they
should be designed so that
those areas with high wear
are constructed in such a
manner that single parts can
be exchanged without having
to replace the whole injection
mould
• Retainer plates are fabricated from unalloyed tool steel.
Steel-No.: 1.1730
DIN-Code: C 45 W
• Moulding platens, which are exposed to temperatures
between 170 and 210°C should be made out of
pretempered steel.
Steel-No.: 1.2312
DIN-Code: 40 CrMnMoS 8 6
• The mould platens which contain the cavities are
preferably produced from hot work steel, tempered later
and possibly nitrided.
Steel-No.: 1.2343
DIN-Code: X 38 CrMoV 5 1
• For highly filled Silastic LSR’s such as oil resistant
grades, the use of even harder materials such as flash
����������� ����������� ��������������������� ����������������
� � � �G�
�%�*�� !�"�� � &����� �� !� ��� *��"�����)� &������ �%��%�
%"&� ����� �'��!� � �&!���"��)� ��� �%�&� "!!���"����� �&�
���**�� � #�
� � ����"�/�����*�01�
� � ��(C �.�8��AA� �F������
� �$������-�����"�� ��� �)� "��-� ��� �������.���
�
+?+:/-� +?./+.� +?./0/����+?./:4�
&�#�������������� �� & �� �#�9���
�����#*����"���
��
�
��("�%��,������
�""�'��
�
�� -���� � %�������
����'�� �� �.�
�#A�C�1#A�K�"�
�
�����(� ����!
�#�A�C���K�"�
,%��&���"������%���"'����&����������&��%��!���&&���� ���������
�")&.�
• ,%��"������� �!���"��&��2"���)��%��&���"������%��&�����"� ��%����)� ������&� '"���&� !���"�� �������*���&#� 9��&%� �
&����� *�&�� ��� �&� � ��� �%�� !� ������ �� ��"�&!"�����
"������&#�
• $�� �� � � &���"��� ��*"��)� !�'� �&� ��&&� " %�&������������%��������������"� ��%��*�� ��%"��"�!��&%� �
&���"����&� �*�� �����"�����&!������"��)� �&���� #�
• ,��"���*=(��-��� &���"��� ���"�� � &����� %"&� "� '��)� %��%���"����&�&�"���#�
9,/7=(��-������ ��&��"&���� �*�� �������%��"������&�!&&����#�
�
��&#����,���
���!��
��������� *�� &� "��� !�����"��)� %�"�� � ��������"��)� ���%� �%��
�&�� �� �"���� ��� %�"���&�� &���!� %�"���&� �� %�"����� !�"��&#� $�
%*�����&� �&��������� �� ��*!��"����� �&� �&��"���� ��
����������� ����������� ��������������������� ����������������
� � � ���
�
�
�
�
���2 � ����������� %#��
≈�A��4=-���
�
�
�
�
�
�
�
�
*"���"����%��&"*���� ����&�����%������� ����������������
���"���!�"��&#�,�����"���'�����*!��"��������"�����*�� &����
�%��*&���&���������'��*"����������&����**�� � ����&�����
��*!��"������������ �%�"���&#�����&�"�&�" '�&"�������"&���%��
*�� ������&��"�����!�"��&����� �����%���%��*"���&&�&#�
E�%�"�� � ���&� �"�� ��� �2!&� � �� ���"�� �%"���&� ���
��*!��"����� �����!����� ����"-���*�&����%�����C���"��#�
4%����%����*!��"������"��&������"���%�&�!������%��*"����"��
����&� ��"��)� &����� "� � �"�� �"�&�� �*�� ���� ����������&�
���"�&����&���-)������������#�
,%�� �&�"������������%�"������"���� ��&�"� � �%��!"������ �����
&%�� � ��� %��%� ����%�� &� �%"�� �%�)� �"���� ��� � �� ���*�
�%��!�"��#�E��'���!�"��&��"��!��'����"���"&%������!���&&#�
�
����%��*�� ��&�����!!� ����%�"��� ��������&)&��*��"���2"���
&�!"�"���� �������� %�� "� � �� � *�� � *�&�� ��� !�'� � #�
B����&!���"�����"���*�"��)&��&��%�"&���0'��34���"�'�5&6���"��
����&� �"&��%�&��%"'��"�*��%�������%��*"���� ����'��)��%"��
�%����)!�&���&����#�
/��*�� &��%��%� "��� %�"�� � �������)�� %�"�� ��&��"�����!�"��&�
&%�� ����!�"�� ���������*�� �"� �*�� �!�"��&���-��!��%��
�&&���%�"����"�*���*�*#�
�
�
�
����������� ����������� ��������������������� ����������������
�
� � � ���
������������� �������
�!�&#" �������
�
�
�
�
�
�$�������M��
��=@�
E!�� &�������� �� �%��*"�%����� �%�� ������� � ��"*!���� �����
*�&����� ����*��� #�,%���2!"�&����� �%��&�����������������
�%��%��*�� ��"�&�&��%����&�����"'��)�!��&&�����!���@����"�#�
,%�� ����� ��� � � �� ��"*!� �%��*�� � �"�� ��� �"����"�� � �)�
*����!�)�����%��!������ �&���"�����"���"������&����%��%���"'��)�
!��&&���#�
�
�78�)!"���'���,��#����#���!!"��)� "��
� (�!!��� �"*�����M�1��**�
� 9������ �&���"���$�M�6���;1�=�<N����M�0'0��&�))*�
� "'��)�!��&&����≤�@����"��� � @����"��M�@��(=**
��
� /�M�!���$�M�@��(=**����G�6G#A@�**
��
�
� ��9�*:'0*�/��"�)!��%�-� ������ �2 � ��#�
�
,%�&�����&!� &����%�"�����������*�� ����*"�%�������%�"�
�&���"�� � ��"*!���� ����� ;� *1� $/� �� "!!�2�*"���)� ��
����#�
�
�/���"��"���
��
����� ".����
,%�� �"*��������%�����������&�����&%�� �����%&������&��%�
"�*"������%"���%��&��-�����%��&������"���&�����������C�A��#�
,%�&� ��"�"����&� "� &�"���� !��"����� !���&&� ��� �%�� ���������
����#�4��%�"�&��-������&&��%"�������%��*�2�������%��&������&�
���"&�� �"&��&���� � �"� ��%����������*'�*���&�����%��
!��"�������%��*"�%����)����*����&&�!����&�#�
�
�
�
�
�
�
�
�
,%���� "��� ��������� �)!�&� �� *����� *�2���� ����&#� B) �"�����
"� �!���*"���� ��'�����)��� ��&�"����%��*"��� ���������&#�,%��
*�����*�2��������� �"��!�*!� �%��*"����"�� ��*���� ������!"��&�
������������ ��*&#�
�
�
�
����������� ����������� ��������������������� ����������������
�
� � � ���
���������������� ���������������������
�-��&#���
�/���"�
,!+" ��
"�)�!"��&�*" ��������������������"���"&&�*��� �"������%��
!� ���������"��" ����"��&��!#����&*���"&�&�����&�!&&�����
�� !� ���� �%�� ��������� ���� "������� ������)� ��� �%�� !&�����
�%�������&%�� ��������%�����"���&�#�
9� ������"��"&-�����&����������������"�%�&�������)����
����2"*!�����%����*���*��% ��&� ��&���!� ������%�!"��&��
%�&����"� ��"&-������&�!"�"������������*�� ����*"�%���&�
"� �������� �%�*����"���2��"�"&&�*������!���&&#�,%���"�����
�&���!� ����&��%�-�� &���!� ���&����"�%��%���"���)�"� ��&��
���������� �")�� �%�&� �"�� ��� "�%��'� � �)� ��C�*!�����
���������*�� ���#�
/���%�&�����*"���!��� ���&�"����**��)��&� .�
�
4<����!� ������=�������)� "���%�)��������
,%�� ���&�� !"��� ����� ��� ������� � ��� �� �%��*!�"&���� �� "�
&�"� "� � ��������� *�� ���� *"�%���#� ��!�� ���� �� �%��
������ �� "��*"����� �%�� �*�� ���� �&� ��� �)� "��*"����
%"� ����� �� *"��"��)#� $�����"� &� �%�� �%��*!�"&���� !"��� �&�
!�"�� � ������)� ��� �%�� ��������� *�� ���� *"�%���� ��� �%��
����� �&����������������%��%��&�&�"� ������&����2�����%�����&��
*"�%���#� ,%�� �%��*!�"&���� "������� ��!��&���&� "� !"��� �� �%��
�"'��)� ������ �%�� �������� ���������*�� ����!���&&#�,%��
����� &%"!�� �� �%�� �������� ���� �"&-��� �&� !�'� � � �)� �%��
"���"�����������*�� #�
9"�"����� �� �%�� *�� ���� �� �%�� ����� � &������� �������� �%��
*"�%��������%���%��*!�"&����&�"��&��%����2���)���#�
�
,%�� " '"��"��� �� �%�&� &)&��*� �&� �%"�� ��� �"�� �&�� ��%�
*"�%���&��� �!�� ����)����"�%��%�������%���!�����&#�����&�
"�&� *��%� �"&���� �� ������ �%�� �%��*"�� �� ����&#� /��
�2"*!��� �%�� ��� ��*!��"����� ��� "� ���%���"�� �%��*!�"&����
��-�� ��"&&C������ �������� � �)��� )*+�"� ��
!�)���)�����%��"!%�%"�"���),���&�"!!�2�*"���)�G��C����5 �
;!��"&�� �%��-� ��� �%�� ���**�� "���&� �� �%�� �"��*"����"��
&�!!����<#�,%����&� �"��%�"�����%��������� ��%��*!�"&����!"���
�&�%��%�����%�����"�%�"��"&������%������������%��%��30���
1+�6�������������*�� ##�
,%���� ��������%�*"����"�&��"�����"�%��'� �*��%"���"��)�
�)��� �����&����%�*��"��)����%��%���&����"�!��*��#����&*��
&!���"�� �"&�&� ��� "�&� %"&� �%�� !&&������)� �� �&�� "� &����
" %�����������������#�
�
4<����)!��������=�������)� "���%�)�������
$��%��� '"��"���� �&� �%�� �&�� �� "� ��C�*!����� ���������
*�� ����*"�%���#�����%�&��"&����%�*"����"�&���������������� �
�� ���*"�%�������%� ��� ��������� ����&#� ,%�&�*"�%���� %"&�
����������� ����������� ��������������������� ����������������
�
� � � ���
��)� ��� *�� � �%"�� ���"��&� ��%� �"'����&.� ��� ��� �%��
�%��*!�"&����"� ��������%������� �&�������������#�
� ,%��*'�*�������%��*�� �!"��&����%����&!����'�����������
!���� �&� ����)�"� ��"�����*�� �!�"��������%� �%���&����"�
����������&�� �����"���#�
��� �&� ��������� �� &��� �!� �%�� !��*�*� ��*!��"����� !������ ���
�"�%�*"����"�#� +��� !&&������)� �&� �� '"�)� �%�� ��*!��"����� ���
�%��*�� .��� �����%���%��*!�"&����"� �%������%�����������
���#�>�����"�%��'���%�&��"�'��)�%��%���'�&�*��������%��*�� �
��*!��"�����������"� �&����������&�������� #�
+����"��"�&�" ��&���%��*�� ���*!��"��������&��%�"��")��%"��
�����%"� ��%���%��*!�"&����!"�����&� ���&����������)���
��� ��� �*�� ���� !&&��������%��� ���*���� �%�� !"��� "� �
�� �%�� �%��� %"� �� �%�� ��*!��"����� �&� &����� %��%� ����%� ��
"�%��'�� "�� ���������� ����%� ������� �� �%�� �����������#� $&�
�2!�������� &%�&�� "� ��� ��*!��"����� �"���� ��� �� �+��
��'�&�� ���&���&�����%�&�*��% #�
���� �� �%�� ��� � ��� "� �"&���� ������� ��%"'����� "� ����� �
�����������������-������������G��=22�7�&%�� �����&� #�,%�&�
�)!�� �� �������� ���� '���"��&�&� "�� ����� ��� ��*!��"����&�
�"&������%���"�%��'��"������������!���&&#�
�
��� �&� ����"���)� !&&����� �� !� ���� �%��� ��C�*!�����
"������&�����%�&��")������%�&�*��"��!��� ���&.�
• &����������%�&����������*����C�����"������&�• ��������"��)� �� ����'�� &������� ��� �*���"���� ���%���&��"�������&����%��%�'��"���"!!���"���&�
• �����������&��������"&-��&���"��*����*�%�&���&�� ��>�?�;��� �>����"���?"&-��<�
�
��������H"&-��
,%��*!�"&���
B�&���
��
,%���*!&�������'"���&�&������&��"&�����%��%��%�'��"���
���%���)�����2"*!������'�&��%��" '"��"����%"���%����� ����
���������%�*"����"�&��&���"��)�"&�&�"����"&��%���"&���*"����"�#�
��
�
�
Dow Corning Injection M oulding of Silastic® Liquid Silicone Rubber
22
Injection
Moulding of One
Component
Silastic HCR
Rapid Cure
The oldest procedure to make silicone rubber parts is still today the most common: injection moulding of high consistency rubber “Silastic HCR Rapid Cure”.The silicone rubber is fed as an endless rope preform or as a block via a special stuffing piston to the injection unit.Compared to Liquid Silicone Rubber one has a large number of bases to compound together to achieve specific end properties. This makes it possible to produce small numbers of articles with a custom developed material that fulfils the special requirements.
W ith the use of these newly developed products, the greatdisadvantage of the low productivity caused by the much slower curing time of peroxide curing materials can be overcome.The use of a platinum catalysed addition curing system renders it possible to shorten the vulcanisation time compared to peroxide curing silicone by up to 70 % .W ith Silastic HCR RapidCure, which is delivered as a stable to store, 1-component ready mix, one gets the possibility toachieve shorter curing times and thereby much higher outputs compared to the use of peroxide curing compounds.
Curing Behavior of SILASTIC Silicone Rubber
0
5
10
15
20
25
30
35
0 1 2 3 4 5 6 7Tim e
Silastic LSR
RapidCure
Silastic HCR RapidCure
M easured with M onsanto M DR at 170°C
Silastic® HCR Rapid Cure, because of the vulcanisationbehaviour, is even with short curing times not so sensitive to tool temperature variations as peroxide curing silicones are. Thereby, deformations due to the demoulding can be
Dow Corning Injection M oulding of Silastic® Liquid Silicone Rubber
23
prevented even with a lower tool temperature. This makes it possible to produce articles with narrow tolerances.Addition curing silicones are also not inhibited by oxygen. For this reason the demoulding is easier and the surface feels dryer than with peroxide materials. As with Silastic LSR, during the production using Silastic® HCR Rapid Cure, no peroxidedecomposition products escape from the material. Due to this, the typical peroxide odour is not present during the production.
The production and tool design forSilastic HCR Rapid Cure silicones is generally comparable with the guidelines for liquid silicone rubber.
The injection barrel is designed specially for the use of these kind of materials. Various machine constructions aredeveloped by machine suppliers to cover this wide range of applications. In common with the various injection moulding concepts is the use of a compression screw and a non-returnvalve which is similar to the ones which are used forthermoplastic injection moulding.
The runners and the injection points should have slightly larger dimensions due to the higher viscosity of Silastic HCR Rapid Cure compared to Silastic LSR. As a result of the higher viscosity, flash is also not so critical. Thereby the ventingchannels can be deeper to a size of 0.01 mm.
The total curing time is dependent on the mould temperature and the geometry of the article:
• forSilastic HCR Rapid Cure with a peroxide curing system one can calculate with 15 sec/mm for thevulcanisation
• for an article made out of addition cured Silastic® HCR Rapid Cure a value of 5-7 sec/mm is representative
����������� ����������� ��������������������� ����������������
�
� � � �@�
������������������������
��&#����,���
���������
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
��/���"����)��
�+��!-�
>�����!��"������%�����������*�� ����*"�%�����"�����"��&���
*�� � !�������� &!�")� �� �%��� ��&�� !��'���"��'�&� *�&�� ���
�%���%�)���*'� #�
�
,%����������������"� ��%���� ��������&%�� ������� � ���
��*�*�+#�
$��� �������2!����������%�����&����*��"���������&��&� ���%��
��*!��"����� &%�� � ��� &��� �� :�1+�� ������ ����������
!� �����#�
�
>����� &�"������ �%�� ���&�� �)���&�� �%�� ��*!��"����� &%�� � ���
���%����%�� �&��� ���*!��"��������"�!��� �����C���*�����&#�
����%��*�� ��&�-�!����&� � �������%��%�"�����!%"&����%���&&�
�� %�"�� "�� �%�� !"������ ����� �&� &�������"���)� ����� "� � �%��
��*!��"����� �� �%�� �"'��)� &���"��&� ��&�&� �����*�)� ���%� �%��
*�� ���*!��"����#�
,%�&� ��"�"����&� �%�� �&��� � ��*!��"����� ��� "��� *�� � !"��&��
�'����%&�����%�"�� � ������)#�
�
4��%�&*��*"�%���&��%��?���!�������%��*�� ��"���%"����
���"�&�� �� �%�� %�"�� �2!"�&��#� ���*"-�&� &��&��� �%�������� ��
" ��&���%��?���!������)�"����-������*!��"����������%��-�
���"�"����%����%����-������*!��"�����%"&��������"�%� #�
�
���� �*�� ���� ��� ��&� ��� !&&������ ��� &%�� � ��� ���� � ��
�� ������� �%�� ���&�� ��������� *�� � � !"��� &� �%"�� "��
'���" ���� �"�� ��� "'� � #� ��� �%�� �������� �)���&� �%��
&���� '��*�� �"�� ��� ��" �"��)� �����"&� � �� �%�� ���"�� &%��
&�?�#�
�
����������� ����������� ��������������������� ����������������
�
� � � �A�
.5 .4 /- /+ /. //
��� ���!,&��1�&23
���
"�!�
�4�"
'��
5��
�("�
%��
����,
��
�"���/�����""��
� ��� �
F��%��
� �
��"�
�?���
�� >�&����&���&�"���"�%��'� ��%����%���"'����&�"�������� �!����&��)�
����C���L��)�'��*�#�
,%�� %�"�� �2!"�&��� �� �%�� ����� � �������� ������� ����&� �%��
�"'��)��*!�����)� �������%�����������*�#�
,%�&��"������2"*��� �������&�"������)�����%�����%������&%� �
"������&#�
�
$�� ���&�� �%�� ��������� !"�"*����&� &%�� � ��� -�!�� &*��%"��
�����!��'����"��'���" #�
,%�� ��������� &!�� � "� � �%�� *"2�*�*� ��������� !��&&����
&%�� ��%�������%&������&��%�"�*"������%"���%���"'����&�"���
����� ����"�!��� ���������������#�
$���%���� ����%����������!��� ��%�����������&!�� �&%�� ����
�� ��� �����"�����%��"�������&� �����%���"'��)���'���#�
�
�-"��'��(����+�
�!+" ������,����
�
�
�
�
�
�
�
�
�
�
�
�
������� �%�� ��������� *�� ���� �� ����� � &������� ��������
%� ����!��&&������&���&��%"����*"����"���&�!�&%� ��"�-���*�
�%���"'��)�������%���"��#�,%�������!��&&���&�����*��� �
;&!�������*"����"��!��&&���<�"���&���������#�
B� ���� !��&&���� ��*�� �!�� &� *"���)� �� �%�� �)!�� "� �
��*���)����%���"��#����"���� ���&%�������??����&��*!�)� ��
%� ���� !��&&���� ��*�� �"�� ����� ��� ����� �� &��� � "&� �%��
�&�%"�������%��*"����"���&�%�� ��� ��)��%����� ���&%�����#�
4��%� !��� �� � ������� &)&��*&�� %��'���� %� ���� !��&&����
*�&�����*"���"��� ��������%���������������&�&��"��'���"��&� �
"�� �%�� �"���� �%"�� �� *"����"�� �"�� �&�"!�� ��*� �%�� �"'��)#�
B� ����!��&&������*�� �!�� &��"����)����%����*���)����%��
�"���"� ��&��**��)����&��������#�
,%��&����%�'�����*������������%� ����!��&&����&%�� ����
�%&��� ��� &��%� "�*"����� �%"�� %� ���� !��&&���� &��&� ��� '��)�
����������� ����������� ��������������������� ����������������
�
� � � �6�
�
�
�
�,�" ��"&���
�"��� "� � ����&� �%�� �"'��)� "� ������#� ,%�&� �"�����"��&� "� ��"&%� �����
��������#�
�
,%��'���"��&"������*������%�����&�����"�&�&%�� ����&������ ����
&��%� "��")� �%"�� �%����������� ���� ����&� &������)� "� � �"�� ���
�*�� � � ���%��� "*"����� �%�� "������� ������ �%��
�*�� ���� !���&&� "� � ���%��� ������ � �������� ����
��*"����������%���"'��)#�
$� '���"��&"���� ��*�� �� ���� ���())� &%�� � ��� �"-��� "&�
&�"� "� �'"���#�
�
�
�
�
��&,!+" ��
B��'���� �%�� '���"��&"���� ��*�� �"�� ��� �� ��� � ������
!����*&�&��%�"&� ���*������&���-���&&�����#�
(�� �%�� ������� ��*�� &%�� � ��� �"�&� � �)� "���� AC���L� ��
��"�"�����"�&"���!���&&#�
�
$���%���������������%��!� �������%�� �*�� ����"�����)���
�%��"������&��&�&*���*�&����'��)�� �"� ��%�)���� ���&���-�
���%��*�� �&����#�,%�&� �*�� ����"�����)��*!�'�&�'�&���)�
"�����&*���)���&�"&�"� �")�����&��2"��&���%��%��&�"!����*�
�%������� �&��������������� �!&��&����%��&�����&�����#�
��"������- ��� ����"&��"������"������&� �"&�"� �*�� ����"� �
����%�����&���)���&#�
$�*�2��������"����"� �&"!��%��%��"�������!� ������%�"�
���%���&!�")� ��� �%���)����%� �%���&����"� ����&��� �&������
����������"� ����*��"�#��
�
��+,��"��+�
�+��!��6�#��
. �� �� ����� � ��� ���
������� ��� ������ ( ���
� ���� �$����� � ��� � ��
������ ��� � ��� ����+
� //�� ��� ��&���� � ����
���� � ������ � ���% ����
�������� ����� ����$�����#��
�����������������������$
�������������������������
�� ������� ���� ��� ��
�
����%��*"�%���� �&����&�"� �&��������*����%"���%���� ")&��"&�
�����&�"�������%�����-�� ����&!���"��*�"&���&���� ������
�"-��� "&� ������ �%�&� ��*�� �%��*�2� ������ ����������������
'���"��&�&���)�&���%��)����"���� ��"����#�
��� ��������"�"����&���%"��"����*!��"����&���&&��%"��1A5 �
*�2� � *"����"�� ����� ��*"��� !���&&"���� ��� "� *���*�*� ��
�%���� ")&������&&��%����&��&�"�� #�
�
��� �%�� *"�%���� &�"� &� &����� ��� "� ������ !��� � �� ��*��� �%��
*�2���� �%�� ��������� ����� "� � �%�� �� � ������� &%�� � ���
���&%� ����%��%��$C�*!����#�
9"��&��%��%��"��)�*�2� �*"����"���"��"�&����-�!�����"�����?���
�����&�"�������������"�������!��� �����*�#�
�
7'�������%��!� ���������&���"��)����%����������!�����"����
�'��)� &�2�*��%&� �%��*�2���"� � �%�� �������������� &%�� ����
���"�� ��%���%�)#�
>)� ���� �%�&� ��� �"�� ��� ��&��� � �%"�� ���� � !"������&� ��� �%��
*�2��������� ���� ��"�%��%�*&��'�&�"� ��%����)�!�����!��%��
�� �����������������%��*�� ��"'��)#�
�
�
����������� ����������� ��������������������� ����������������
� � � �G�
������������������������������� ������������������������
78� ���"�!��"��,+���"!!�+� �� 9"����&�&%���
�� E��'���&���"���
�� E� �������%��!"���
�
�� ��� ��" ������6� >�=��������!����� �! ��� ����������!��)�"� • �"�&�����������'�����)�"� �!&&���)����������
!��&&����
�6� ����%����� --������� • 7��"���� &����'��*��
�6� ��� �,�����%� • ����9�����6,������0,�������
�6� 4��"���)!� �� ��������%�� • ����������*!��"�����
�6� �<������,� �������"���%�! ��� ������
�� ����
• ���")�&����%�'���
• �����"&��%� ����!��&&����
-6� ��������-� "�� • %��-��" �"��&��������"�"����"� �����������
'"�'��
%6� ��"�� ��� �� ��! ����)��������-� "�#� • %��-�&!����&)&��*����&��������!������ �
"��"&�
• %��-� �*��&��&���&!����"� �!&&���)�
���"����
�6� G��,���-�""��%��-���,������ • >"�"�����������"� ��"��
�6� � �� ��%������=������� ����� �� !!"#�"����� • ��"��&)&��*�
�
�
98� �!��'" ���&,!+� �� �����������*�"��!"�����������
�
�� ��� ��" ������6� �������H������"� %�� • �� ���� &����'��*��
• %��-�����'��� &����'��*��
�6� >�=��������!����� �! ��� ����������!��)�"� • �� �������������'�����)�"� �!&&���)�
���������!��&&����
�6� �<������,� �������"���%�! ��� ������
�� ����
• ����&����%�!�����"������"� ��� ����%� ����
!��&&����
�6� 5�����%�������"�������%� • �� ����&�?����'���&�
�6� 4��"���)!� �� ������"�<� • �"�&����*!��"�����"� ��%��-����'���*�� �
��*!��"�����
• %��-�%�"���&�"� ��%��*��!��&�
-6� 4��"���)�%���� ����"��� • %��-�!"����������&�"� �*'"����!"��&����
��"��"� ���!"���������-��
• ��"��!"�����������
%6� �"�)!��%�-� �������"�<� • �"�&����"*!�����������&����%����"�����
*"�%�����������&&"�)�
�
�
�
Dow Corning Injection Moulding of Silastic® Liquid Silicone Rubber
28
3) Bubbles / Burners Blisters visible in finished parts
White edges
Cause Solution a) Injection speed or pressure too high • Reduce injection velocity and possibly
pressure
b) Tool temperature too high • Reduce tool temperature
c) Venting channels soiled or not properly
dimensioned
• Clean mould
• Deepen vents
• Reduce clamping force
d) Vacuum insufficient • Check vacuum pump
• Check gasket for defect spots
• Prolong time for building up vacuum
e) Air in meter mixer • De-air the unit
• Check gaskets
f) Uneven filling • Balance runner and gat
4) Silicone not cured Article sticks in the cavity
Article feels tacky
Cause Solution a) Vulcanisation time too short • Prolong vulcanisation time
b) Tool temperature too low • Raise temperature
• Check heaters and thermocouples
• Check if temperature is even
• Shorten break time
c) Mixing proportion not 1:1 • Check meter mixer for fluctuation of pressure
• Clean supply lines and mixer from precured
particles and areas
d) Curing inhibited • Check that no sulphur or tin are con-
taminating the Silastic LSR unit (occurs often
when organic rubbers are produced close to
Silastic LSR)
����������� ����������� ��������������������� ����������������
� � � ���
�
:8� ����'��
� ����,�" ����'��&����"�!�+,�" �
�'��"/���"�#������
�� 9"���&%�&�&���"-&�
�� ������)�"!!�"�������������&�
�� +�"����&-���
�
�� ��� ��" ������6� >�=��������!�����������"�<� • �"�&�����������'�����)�"� �!&&���)�!��&&����
�6� 4��"���)!� �� ��������%�� • �����*�� ���*!��"�����"� �!&&���)��� �
���������*!��"�����
�
�
;8� ����,��+�#���"�!���"��""�'�+�
���"�!��
�� ��� �!"������&�"!!�"���������%��!"���
�� ��� �&!����'�&��������"�������
�
�� ��� ��" ������6� 4�)!� �� ���-���"�� ��� ������=�������
!������������"�<���� %��
• ��������*!�'������������ ��������
• ����������*!��"�����"���%���"���
�6� ���� ��"�"��$��- �)�������=�������!����� • ���*!��&&�����*"����"������%���� ��������
���%�!���&)&��*���&����������
• �%��������� ��&�%"'����*��%����"�"����
�6� � �� ���!� ���"���� ���!��"���� ��- �)�
������=������� ����� �)�8� �
• ��"��*�2� �*"����"����" ����"��"&�
�
�
<8� ��*!�&��-"�'�+�&,!+" � �� $���������������� ���*��"'��)�
�� ��������&����&�!"�"�������*�!"���
�
�� ��� ��" ������6� 4��"���)!� �� ��������%�� • �����*�� ���*!��"�����
�6� ��"���%�! ��� ������"��%�� �������%�� • �� ����%� ����!��&&��������*��
�6� � ��%���)������"��%� • �%�����'���"��&"������*��
�6� 4��"������ ����������!� -���� • +!��*�&���� �����&�
• ,��"��*�� �&���"��&���" ��&�����%��&&�
• *�����������C!��&��C���&%�&��C!�"��&�����%�
"���������"� =��������&���!�
�
�
=8� ��������+"&��"���#���� �� $��������&� ���*� �"����� �*�� ����
�� 9"��� �*��&��&�������"����
�
�� ��� ��" ������6� � ��%���� --������� • 9�����'���"��&"������*��
• �����"� �!��*�&����*!��"�������*�� �
�6� �� ��$�%������%��� • %��-�����'��������*!��"�����
• $ ��&�����������!"�"*����&�������������� �
�"'��)�!��&&����
�
����������� ����������� ��������������������� ����������������
� � � 1��
>8� ���� ,!����%�!���"&��� �� F"�)�����)������*�&� �������%��!� ������
�
�#��
�#
?
����� ����
��� ��� ��" ������6� �����%���)��,� �������������)���)���"��%� �
������ ��%���)��
• $ ��&��!��&&��������%��!�*!����������'���)�
• ��*'��!������ �*"����"����*��%��*�2���
• �����"&�� &����&!�� �
• +!��*�&���"�-�!��&&����
• �����%) �"�����&)&��*����%��*"�%����
• %��-���C�������'"�'��
�6� >�=���������)��� �% "� � • ��������������!"�"*����&�
• �������*!��"��������� ��������
• ���������'��� &����'��*��
• %��-���C�������'"�'��
�
�
7@8� ��!"���
� ����"�!��,����"�"/���"�,"��
�� ��"������ ����������&�"�����"�������!� ������
���"-�
�� ���������������"� � &������*�&�"��!� ������
&�"���
�
�� ��� ��" ������6� ���� ��"��������)�8� �����������=�������
������%�������� ��
• %��-�����������������������
• �!����������%�$C�*!�����������"�
&�"� &�������*����%"���%���� ")&�
• ��&�����������������������*��%��%��*�� �
�'���"��&%������"-&�
• ����������������� ��������"�����
&����%��������%�����%�"�����
�
�
�
�
Your Global Connection
Dow Corning has sales offices, manufacturing sites, aswell as science and technology laboratories around theglobe. Telephone numbers of locations near you are avail-able on the world wide web at www.dowcorning.com, orby calling one of our primary locations listed below.
North American and Corporate HeadquartersDow Corning CorporationPhone: +1 989 496 4000
Brazil RegionDow Corning do Brasil Ltda.Phone: +55 11 3759 4300
Mexico RegionDow Corning de Mexico S.A. de C.V.Phone: +525 327 1300
European Area HeadquartersDow Corning SA Business & Technology Centre Phone: +32 64 888 000
Asian Area HeadquartersDow Corning Toray Silicone Co., Ltd.Phone: +81 3 3287 1011
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLYThe information contained herein is offered in good faith and is believed to be accurate. However, becauseconditions and methods of use of our products are beyond our control, this information should not be usedin substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe anypatent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications ineffect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund ofpurchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIALDAMAGES.
We help you invent the future is a trademark of Dow Corning Corporation.Dow Corning and Silastic are registered trademarks of Dow Corning Corporation.Cover photo - AV02496
Form no. 45-1014B-01
www.dowcorning.com
We help you invent the future.™