Product Line CardInnovative Cutting Tool Solutions

PLC0312:catalogue NEW (By Product) 1 3/23/12 4:31 PM Page 2

ww

w.c

ham

pion

cutti

ngto

ol.c

om

Pro

duct

Lin

es

Cutting Tool Solutions

XL5 Heavy Duty DrillsSizes - 1/16 to 1/2, Letters & NumbersStainless steel & tough alloys

1XGO Heavy Duty BlackGold DrillsSizes - 1/16 to 1/2, Letters & Numbers

3700T TiN Coated DrillsSizes - 1/16 to 1/2 & NumbersMax. Speeds/Feeds in production drilling

4

6705 Steam Oxide Treated DrillsSizes - 1/64 to 11/16, Letters & Numbers

7405 Bright Finish DrillsSizes - 1/64 to 1/2, Letters & Numbers

8US5 Steam Oxide TreatedSizes - 1/16 to 1/2, Letters & Numbers

705C Cobalt DrillsSizes - 1/64 to 1/2, Letters & NumbersStainless Steel & Tough Alloys

10

11708 Metric DrillsSizes - 0.25mm to 17.50mm

12

XG38 BlackGold 3/8” Shank DrillsSizes - 25/64 to 1/2

738 3/8” Shank DrillsSizes - 25/64 to 11/16

2905 3/8” Shank Split Point Screw Machine DrillsSizes - 7/16 & 1/2

S1 Taper Sleeves, S2 TaperSockets and D1 Drift keys

1800 18” Longboy DrillsSizes - 3/16 to 1”

1200 12” Longboy DrillsSizes - 1/8 to 3/4

2705 1/4” Shank Split Point Screw Machine DrillsSizes - 5/16 & 1/2

CS14 1/4” Shank Screw Machine DrillsSizes - 9/32 to 1/2

XL12 1/2” Shank S&D Drills3 Flats - Sizes - 33/64 to 1-1/2Split Point for Stainless Steel & Tough Alloys

712 1/2” Shank S&D DrillsSizes - 33/64 to 1-1/2

702 Taper Shank DrillsSizes - 1/8 to 3-1/4

704 Taper Length DrillsSizes - 3/64 to 1-3/4

Drills

Jobber

1212 12” Longboy 1/2” ShankSizes - 17/32 to 1”

7006 6” Aircraft ExtensionSizes - 3/64 to 3/8, Numbers & Letters

CS6X 6” Aircraft ExtensionSizes - 1/16 to 1/2, Numbers & Letters

MSD Multi Step DrillsHSS, Split Point

1/2 x 1/8, 1/2 x 3/16, 7/8 x 1/4, 3/4 x 1/4,7/8 x 3/16, 1-1/8 x 7/16, 3/8, 1/2, 1 x 9/16,1-3/8 x 3/4, 1-1/8 x 1/4 1-1/2 x 1/4

MSD HEX Multi Step DrillsHex Shank, Split Point, Titanium Nitride Coated1/8-1/2, 1/4-3/4, 3/16-7/8 & 1/4x1-1/8

XL5LH Left Hand DrillsSizes - 5/64, 7/64, 5/32, 1/4 & 19/64Drill broken bolts in left hand rotation

705LH Left Hand DrillsSizes - 1/16 to 1/2

XL28 Mechanics Length Drills3 Flatted Shanks - Sizes - 1/16 to 1/2Stainless Steel and Tough Alloys

XL38 Heavy Duty 3/8” Shank Sizes - 25/64 to 1/2Stainless Steel and Tough Alloys

XM28 Mechanics Length Drills3 Flatted Shanks -Sizes - 25/64 to 1/2Straight Shank

Drills

Reduced Shank/Screw Machine/S&D Drills

Drills

Taper Shank/Taper Length Drills

Drills

Extra Length Drills

Drills

Step Drills

XG12 1/2” Shank S&D DrillsSizes - 33/64 to 1-1/2Split Point - 3 Flats

US12 1/2” Shank S&D DrillsSizes - 33/64 to 1-1/2705SP Heavy Duty Drills

Sizes - 3/64 to 1/2, Letters & Numbers

XL8 Metric DrillsSizes - 1.0mm to 13.0mm x 0.5mmStainless Steel & Tough Alloys

7012 12” Aircraft ExtensionSizes - 3/64 to 1/2 & Numbers

CS12X 12” Aircraft ExtensionSizes - 1/8 to 1/2 & Numbers

2

712CO Cobalt 1/2” Shank S&DSizes - 17/32 to 1-1/2

1705C Cobalt Screw MachineSizes - 3/64 to 1/2, Numbers & Letters

1705 Split Point Screw MachineSizes - 3/64 to 1/2, Numbers & Letters

USHD Steam Oxide TreatedSizes - 1/16 to 1/2, Letters & Numbers

PLC0312:catalogue NEW (By Product) 1 3/23/12 4:32 PM Page 3

Product Lines www.cham

pioncuttingtool.com

105 Solid Carbide DrillsSizes - 1/32 to 1/2

705CT Carbide Tipped TwistSizes - 1/8 to 1/2

CT505 Glass & Tile DrillsSizes - 1/8 to 5/8

CT605 Carbide Tipped Die Sizes - 3/16 to 3/4

X1 Spiral Flute Screw ExtractorsSizes - 1 to 12 (sets available)

X2 Straight Flute Screw ExtractorsSizes - 1 to 7 (sets available)

1710 Spotting & Centering DrillsSizes - 1/8 to 1-3/4

1805 Double End Sheeter DrillsSizes - 7/64 to 1/4 & Number 30

705-Pilot Drill for Holesaws1/4” diameter, 3 slab, 4” length, split point

Gauge PlatesFractional, Metric, Letters & Numbers

ButeLube XLUB Fluid & Wax4oz, 16oz, 1 gallon & 5 gallon fluid2oz & 16oz wax16oz wax stick

XL86 Hex Shank Bridge ReamersSizes - 11/16 to 1-5/8

HX80 Hex Shank Car ReamersSizes - 11/16 to 1-3/16 (Straight Flute)

Drills

Carbide Tipped Drills

Screw Extractors

Drills

Miscellaneous

Reamers

HX82 Hex Shank Car ReamersSizes - 11/16 to 1-3/16 (Spiral Flute)

970, 970W, 970L, 970DStraight Shank Chucking ReamersSizes - 3/64 to 1-1/2, A-Z , 1-60

960 Taper Shank ChuckingReamers

962 Taper Shank ChuckingReamers

950 Straight Flute Hand ReamersSizes - 1/8 to 1-1/2

952 Spiral Flute Hand ReamersSizes - 1/4 to 1-1/2

900 Adjustable Blade Hand ReamersSizes - 8/A to O

972 Spiral Flute ChuckingReamers

Reamers

Carbide Tipped Hole Cutters

CT-EXT Hole Cutter Extensions4” Extensions for CT5 & CT7

Hole Cutter Accessories

QCD Quick Change Driverfor 1/4 and 3/8 hex shank tools

SA80 Straight Shank Car ReamersSizes - 5/16 to 1-1/16

CT705 Carbide Tipped Locksmith DrillsSizes - 1/8 to 1/2

980 Taper Shank Bridge ReamersSizes - 7/16 to 1-5/16 (Straight Flute)

982 Taper Shank Bridge ReamersSizes - 7/16 to 1-5/8 (Spiral Flute)

3

900P Adjustable Blade Reamer PilotsSizes - A to O

776 Straight Flute Taper Pin Reamers Sizes - 7/0 to 10

778 Spiral Flute Taper Pin Reamers Sizes - 7/0 to 10

777 Fast Spiral Flute Taper Pin Reamers Sizes - 7/0 to 10

2005 Corrugated Construction DrillsFor use in the fabrication of steel buildings

CT3 Carbide Tipped Hole CuttersSizes - 5/8 to 1-3/8”

Ideal for cordless power tools andmaterials up to 1/8 thick. 1/4” hexshanks for use with quick releaseadaptors.

CT5 Carbide Tipped Hole CuttersSizes - 9/16 to 5”

New & improved. Faster drilling andlonger life in materials up to 3/16thick.

CT7 Carbide Tipped Hole CuttersSizes - 9/16 to 4-1/2”

For drilling thick (up to 1”) and thinmaterials, ferrous and non-ferrous.

CT9 Carbide Tipped Hole CuttersSizes - 1-1/2” and 2-1/8”

Ideal for steel door installation.

PLC0312:catalogue NEW (By Product) 1 3/23/12 4:34 PM Page 4

1Carbide Burs - Non FerrousShapes - SA to SL / Sizes - 1/8 to 3/4”

3Carbide Burs - MiniatureDouble Cut Shapes - SA to SN / Sizes 1/16 to 1/4”

4Carbide Burs - Long Series Double Cut Shapes - SA to SL / Sizes - 1/8 to 1/2

Carbide Fiberglass RoutersSizes - FGR-1 to FGR-9

7XL801 Single Flute CountersinksSizes - 1/4 to 2” - 60 / 82 / 90 & 120°Stainless Steel and Tough Alloys

8800 Four Flute Machine CountersinksSizes - 1/2 to 1” - 60 / 82 & 90°

9799 Three Flute CountersinksSizes - 1/4 to 1” - 60 / 82 / 90 & 120°

10

11

12

XL22T Heavy Duty Spiral Point TapsTiN Coated Sizes - 4-40 to 3/4-16

321/321M Spiral Point TapsSizes - 0-80 to 3/4-16 StandardSizes - 1.6x.35 to 20x2.5 Metric

302/302M Carbon Steel Hand TapsSizes - 4-40 to 1-1/2-12 Standard 3x.5-P to 18x2.5-P Metric

327/327M Carbon Steel Round DieStandard Sizes - 4-40x1 to 1-14x2Metric Sizes - 2.5x.45x1 to 24x3.0x2

330/330LH/330MSizes - 6-32 to 2-1/2-12, 1/8 to 1” NPT3.5x.6 to 27x3 , 1/4-20 to 1-14 LH

321T TiN Coated Spiral Point TapsSizes - 6-32 to 3/4-16

308 High Speed Steel Hand TapsSizes - 0-80 to 1-1/2-12

308LH/308M Left Hand & MetricHigh Speed Steel Hand TapsSizes10-32 to 1-14 & 1.6x35 to 39x4

324/324H/324L Taper Pipe TapsRegular / High / Low HookSizes - 1/6-27 to 2-11-1/2

304 Carbon Steel Taper Pipe TapsSizes - 1/8-27 to 2-11-1/2

Carbide Burs

3308 Hex Rethreading Dies8 Thread - Sizes - 1-1/8 to 4”

328 Screw Adjustable Round DiesSizes - 6-32x13/16 to 1-14x2

CS30/CS30M Hex Rethreading DiesCarbon Steel Sizes - 4-40 to 1-14 Metric Carbon Steel Sizes - 3x.5 to 18x2.5

DT22/DT22M Combined Drill & TapsStandard & Metric Sizes - 4-40 to 12x1.75

DT22T Combined Drill & TapsTitanium Nitride CoatedSizes - 4-40 to 12x1.75

CSK Countersinks / Deburring ToolsZero Flute 82° Pilotless Ideal for Glaziers

DCB 60° Zero Flute CountersinksSizes -3/32-11/64 to 1/2-1-3/32

XL22 Heavy Duty Spiral Point TapsSizes - 4-40 to 3/4-16

795 Combined Drill &CountersinksExtra Long - Sizes - 1x3 to 8x6

Taps & Dies

Taps & Dies

Tap and Die Accessories

Carbide Burs - Double CutTitanium Nitride CoatedShapes - SA to SN / Sizes - 1/8 to 1”

Countersinks

325 Straight Pipe TapsSizes - 1/8-27 to 1-11-1/2

3305 Hex Convertorfor Round DiesSizes - 13/16 / 1”/ 1-1/2 & 2”

2002/3002 ‘T’ Handle Tap WrenchesSizes - 1/16-1/4, 7/32-1/2, 0-1/4, 1/4-1/2

3001 Bar Handle Tap WrenchesSizes Ranges - 1/16 to 2-1/2

3291/3292 Round & Hex Die StocksSizes Ranges - 13/16 to 2”

ST SpeedThreadersCombination HSS Die & DiestockSizes - 6-32 to 12x1.75

324I Taper PipeInterrupted ThreadSizes - 1/8-27 to 2-11-1/2

www.cha

mpion

cutting

tool.com

Prod

uct L

ines

Cutting Tool Solutions

XL46 Heavy Duty Spiral Flute TapsSizes - 6-32 to 1/2-20

3088 8 Thread HS Hand TapsSizes - 1-1/8 to 4

3006-3012 Pulley TapsSizes - 1/4-20 to 3/4-10

1308 Nut TapsSizes - 1/4-20 to 1/2-13

DT22HEX Combined Drill & TapsHex Shank - Standard and MetricSizes - 6-32 to 12x1.75

4

799L Large Four Flute Countersinks Sizes - 1-1/4 to 2” - 60 / 82 & 90°

DBK/CSKAZero Flute Countersinks Sizes -1/64 - 11/64 to 1/2 - 1-15/32

798/198 Combined Drill & CountersinksHSS & Solid Carbide Plain StyleSizes -1/64 - 11/64 to 1/2 - 1-15/32

796 Combined Drill &CountersinksBell Style - Sizes - 11 to 18

PLC0312:catalogue NEW (By Product) 1 3/23/12 4:35 PM Page 5

Product Lines www.cham

pioncuttingtool.com

End Mills

515 High Speed Square Tool BitsSizes - 1/8 to 1-1/4

516 / 517 Cobalt Square Tool Bits5% & 8% CobaltSizes - 1/8 to 1-1/4

Miniature End Mills

Tool BitsHigh Speed, Cobalt & Brazed Carbide Tool Bits

RotoBruteMagnetic Drill Presses

XL100T High Speed Titanium Nitride Coated 1” Depth of cut - Sizes - 7/16 to 2-1/4

XL100 High Speed 1” Depth of cut Sizes - 7/16 to 4”

RotoBruteAnnular Cutters

XL200 High Speed 2” Depth of cutSizes - 7/16 to 4”

106 Solid Carbide End Mills2 Flute Sizes - 1/32 to 1”

107 Solid Carbide End Mills2 Flute / Double Ended Sizes - 1/8 to 1/2

600 HSS End Mills2 Flute Sizes - 1/8 to 2”

600T TiN Coated HSS End Mills2 Flute Sizes - 1/8 to 2”

600CO Cobalt End Mills2 Flute Sizes - 1/8 to 1-1/4

XL600 Cobalt TiN Coated End Mills2 Flute Sizes - 1/8 to 1-1/4

602 High Speed End Mills2 Flute / Double End Sizes - 1/8 to 1”

602CO Cobalt End Mills2 Flute / Double EndSizes - 1/8 to 1”

604 Ball Nose High Speed End Mills2 Flute / Single EndSizes - 1/8 to 1-1/2

605 Ball Nose High Speed End Mills2 Flute / Double EndSizes - 1/8 to 1”

601 High Speed End MillsMulti Flute Sizes - 1/8 to 2”

601T TiN Coated HSS End MillsMulti Flute Sizes - 1/8 to 2”

601CO Cobalt End MillsMulti Flute Sizes - 1/8 to 1-1/2

XL606 TiN Coated Cobalt End MillsMulti Flute Sizes - 1/8 to 1-1/2

603 High Speed End Mills4 Flute / Double End Sizes - 1/8 to 1”

606 High Speed End Mills4 Flute Sizes - 1/8 to 1-1/2

607 High Speed End Mills4 Flute / Double End Sizes - 1/8 to 1”

607CO Cobalt End Mills4 Flute / Double End Sizes - 1/8 to 1”

625 Corner Rounding End MillsSizes - 1/16 to 1/2

609 Cobalt Roughing End MillsMulti Flute Sizes - 1/2 to 2”

608 Long High Speed End MillsMulti Flute Sizes - 1/4 to 2”

620 Extra Long High Speed End MillsMulti Flute Sizes - 1/4 to 1-1/2

610 Miniature High Speed End MillsMulti Flute Stub Length3/16 Shank - Sizes - 1/32 to 3/16

611 Miniature High Speed End Mills2 Flute Double End Regular Length3/16 Shank - Sizes - 1/32 to 3/16

613 Miniature Stub HSS End Mills4 Flute Double End Stub Length3/16 Shank- 1/16 to 3/16

614 Miniature High Speed End Mills4 Flute Double End Regular Length3/16 Shank - Sizes - 1/16 to 3/16

CT150 Carbide Tipped High performance & life in tough steels1-3/8 Depth of cut - Sizes - 9/16 to 1-9/16

CT200 Carbide Tipped High performance & life in tough steels2” Depth of cut- Sizes - 9/16 to 4”

CT300 Carbide Tipped High performance & life in tough steels3” Depth of cut - Sizes - 3/4 to 4”

CT400 Carbide Tipped High performance & life in tough steels4” Depth of cut - Sizes - 3/4 to 2”

Carbide Tool Bits / Turning BitsStyles -AL / AR / BL / BR / C / CTL / CTR / D / E

5

RB32 / RB32-VSRMiniBrute / AC35Cutter Capacity - 1-3/8” Drill Capacity - 3/4”

RB45MightiBruteCutter Capacity - 2” Drill Capacity - 1”

RB65EMegaBruteCutter Capacity - 4” Drill Capacity - 1-1/4”

RB30LittleBruteCutter Capacity - 1-3/8”

166/167/168 Solid Carbide End Mills4 Flute Sizes - 1/16 to 1”

PLC0312:catalogue NEW (By Product) 1 3/23/12 4:36 PM Page 6

www.championcuttingtool.com

Product Lines

Cutting Tools Solutions

XL200STK Cobalt Stack Cutter for Drilling Multiple Layers2” Depth of cut - Sizes - 7/16 to 1-1/4

XL300 High Speed 3” Depth of cut Sizes - 3/4 to 4”

CM6 Rotary Masonry DrillsFast Spiral / 4” Regular LengthSizes - 3/16 to 7/16

XL100M High Speed 1” Depth of cutMetric Sizes - 13 to 50 mm

XL200M High Speed 2” Depth of cut Metric Sizes - 13 to 50 mm

CM66 Rotary Masonry DrillsFast Spiral / 6” Long LengthSizes - 1/4 to 1”

CSC4 Rotary / Percussion Deep Flute / 4” Short LengthSizes - 1/8 to 1/2x1/4

CM8 Rotary Masonry DrillsDeep Flute / Regular LengthSizes - 1/8 to 7/16

CM86 Rotary Masonry DrillsDeep Flute / 6” Long LengthSizes - 3/16 to 1-1/2

CM95 SDS Plus Hammer BitsSizes - 5/32x2x4 to 1x16x18

CM96 SDS Max Hammer BitsSizes - 1/2x8x13 to 1-1/2x18x23

CM97 Spline Shank Single PointSizes - 3/8x3x8 to 2x17x22

CM98 Spline Shank Quad PointSizes - 5/8x6x11 to 2x18x23

Hammer Core Bits AdaptorsFor CM96 & CM97

Hammer ChiselsFor CM95, CM96 & CM97 IncludesBreaker / Demolition & Floor Chisels

8048 Bellhanger Drills12”, 18”, 24” & 30” Lengths

8518 Electricians Power DrillsSizes - 5/8 to 1-1/4

8006 Auger Drills 8” OALSizes - 1/4 to 3/4

8018 17” Auger DrillsSizes - 3/8 to 1-1/2

8700/8800 Auger Extensions8700 Sizes - 12”, 18” & 24”8800 Sizes - 18” & 24”

RotoBruteMagnetic Drill Press Accessories

ProLineMasonry Drills and Hammer Chisels

CM12 12” Rotary Masonry DrillsDeep Flute / 12” Long LengthSizes - 3/16 to 1-1/2

CM18 18” Rotary Masonry DrillsDeep Flute / 18” Extra Long LengthSizes - 1/4 to 1-1/2

CM24 24” Rotary Masonry DrillsDeep Flute / 24” Extra Long LengthSizes - 1/4 to 1-1/2

TCB Tapcon Masonry DrillsSizes - 5/32x3-1/2 to 3/16x7-1/2

CM85 Percussion Masonry DrillsSizes - 3/16 to 1”

CM89HC Hammer Core BitsSizes - 1-3/4 to 5”

8606 Heavy Duty Auger Drills6” LongSizes - 1/2 to 1-1/2

8001 Wood Boring Flat Bits6” LongSizes - 1/4 to 1-1/2

8016 16” Wood Boring Flat BitsSizes - 1/4 to 1”

CM95T Tapcon SDS-Plus DrillsSizes - 3/16x3x5 to 5/32x4x7

ProLineWood Bits & Accessories

CM79 Rotary Rebar Cutters12” LongSizes - 1/2 to 3”

RotoBruteAnnular Cutters

ProLineMasonry Drills and Hammer Chisels

CSC6 Rotary / Percussion Deep Flute / 6” Long LengthSizes - 1/4 to 3/4

PTC Porcelain Tile Carbide DrillsPenetrate Class 5 TileSizes - 3/16, 1/4, 9/32 & 5/16

PTC2 Diamond Core DrillsPipe / Through Hole SizesSizes - 3/4, 1, 1-3/8 & 1-3/4

XL200T High Speed Titanium Nitride Coated2” Depth of cut - Sizes - 7/16 to 2-1/4

6

CM-MPB Multi-Purpose Bits For Metal, Masonry, and WoodSizes - 1/8 to 1/2”

CM95X SDS Plus Hammer BitsSolid Tip Cross HeadSizes - 3/16x2x4 to 1-1/4x16x18

RB SADDLE for Pipe CuttingUse on convex surface, steel pipe & tubing

RB Industrial Arbors Range of Arbors for RB32, RB45 and RB65

RB Tapping Attachments Quick Change Tapping Collets for RB Machines

RB Drill Chucks Range of Chucks for RB32, RB45 and RB65

RB Pilot Pins For CT150, CT200, CT300, CT400 andXL100, XL200, XL300

RMX7 Magnetic Clean Up Tool

PLC0312:catalogue NEW (By Product) 1 3/23/12 4:37 PM Page 7

Tap & Die SetsWood & Plastic Cased

Cutting Tool Sets

Tap & Drill SetsNC / NF / Metric

Hole Cutter SetsCT3 / CT5 / CT7 Plastic & Metal CasedXL100, XL100T, XL200 & XL200TPlastic Cased

Carbide Bur SetsPlastic CasedFerrous & Non Ferrous

Countersink SetsZero Flute & Deburring

Reamer SetsPlastic & Metal Cased

Hammer Bit SetsMulti Purpose Bit Sets

Step Drill SetsPlastic Cased

Silver & Deming Drill SetsPlastic & Metal Cased

Product Lines www.cham

pioncuttingtool.com

7

Drill SetsDispensers / Merchandisers

PLC0312:catalogue NEW (By Product) 1 3/23/12 4:38 PM Page 8

Product Innovation

Service Marketing Promotion

Technical Technology

99%

Champion Services

Tel: 516.536.8200 Fax: 516.536.8186P.O. Box 368, Rockville Centre, NY 11571-0368

www.championcuttingtool.com

Champion Brands

www.championcuttingtool.comAn interactive website which includes videos, catalogs and brochures (complete literature download section) and technical information.

Professional grade cutting tools including twist drills,

taps, reamers, burs

Heavy-duty twist drills, reamers,taps, and countersinks;

designed to cut stainless steel & hard-to-machine materials

Magnetic drill presses, annularcutters for large diameter

hole-making in structural steel

Rotary hammer bits and steelchisels for the toughest masonry applications

Distributed By:

Innovative Products

PLC-0412/15K

Showroom

Brute Platinum Sets BruteLube Cutting Wax Solid Tip SDS Plus DrillsCM95XXLUB-STICKTWISTER-XL5, TWISTER-XL28,

TWISTER-XM28

PLC0312:catalogue NEW (By Product) 1 3/23/12 4:47 PM Page 1