Insert a transient load in a modelWorkbench 14.0

Aalborg Universitet Esbjerg Søren Heide Lambertsen

Make a beam model or for this example download the Transient Beam Geometry from the homepage.

Use a fixed support in one of the ends.

Set the “Step End Time” to 3 sec

And define 30 substeps

Add a force as a components.

Then chose “Tabular”

Make a time series. In this example MS EXCEL is used to make a 3 sec time series.

Then copy the time and set it in to the “Tabular data” and copy the load and set it in to “Tabular data Force Y”.

Like this and solve.