AEL343C AEL645B Installation NGEL0146 To install SMJ, tighten bolts until orange “fulltight” mark appears and then retighten to specified torque as required. : 3 - 5 N·m (0.3 - 0.5 kg-m, 26 - 43 in-lb) CAUTION: Do not overtighten bolts, otherwise, they may be damaged. SUPER MULTIPLE JUNCTION (SMJ) Installation
Transcript
AEL343C
AEL645B
InstallationNGEL0146
To install SMJ, tighten bolts until orange “fulltight” mark appearsand then retighten to specified torque as required.
: 3 - 5 N·m (0.3 - 0.5 kg-m, 26 - 43 in-lb)CAUTION:Do not overtighten bolts, otherwise, they may be damaged.
![Installation 2. Crankshaft pulley › sites › default...3] Tighten the bolts to 55 ± 5 Nm {5.6 ± 0.5 kgm} in diagonal order. 4] Retighten the bolts by 90 ± 5 degrees. a Tool A6](https://static.documents.pub/doc/80x56/60c814ec0784976b867d2dd3/installation-2-crankshaft-pulley-a-sites-a-default-3-tighten-the-bolts.jpg)
