sAluminum and Copper LugsBornes de alimentación y cuerpo múltiplesBornes de répartition AL / CU

1 / 3

TA3MG500 / 3VL9650-4TG01

2X 5/16” -18 UNC X 1.25”

Installation Instructions / Instructivo de Instalación

TA2MG750 / 3VL9675-4TF01

2X 5/16” -18 UNC X 3.0”

TC3MG500 / 3VL9650-4TG11

2X 5/16” -18 X 1.25”

Use only with Siemens certified Components.Utilizar únicamente con componentes certificados de Siemens.A utiliser uniquement avec les composants certifiés Siemens.

Turn off and lock out all power supplying this device before working on this device.Replace all covers before power supplying this device is turned on.

Couper l'alimentation de l'appareil et barrer avant de travailler.Remplacez touts les couverts avant quel'approvisionnement de pouvoir soit alimenté.

Tensión peligrosa.Puede causar la muerte o lesiones graves.

Tension dangereuse.Danger de mort ou risque de blessures graves.

Hazardous Voltage.Will cause death or serious injury.

Desenergice totalmente antes de instalar o darle servicio. Reemplace todas las barreras y cubiertas antes de energizar el interruptor.

Turn off and lock out all power supplying this device before working on this device.Replace all covers before power supplying this device is turned on.

Couper l'alimentation de l'appareil et barrer avant de travailler.Remplacez touts les couverts avant quel'approvisionnement de pouvoir soit alimenté.

Tensión peligrosa.Puede causar la muerte o lesiones graves.

Tension dangereuse.Danger de mort ou risque de blessures graves.

Hazardous Voltage.Will cause death or serious injury.

Desenergice totalmente antes de instalar o darle servicio. Reemplace todas las barreras y cubiertas antes de energizar el interruptor.

Item: TC3MG500 3VL9650-4TG11TA3MG500 3VL9650-4TG01TA2MG750 3VL9675-4TF01

_TA2MG750 3VL9675-4TF_1_TA3MG500 3VL9650-4TG_1_TA3MG600 3VL9660-4TG_1

U.S. Cat. No. Euro Order No.

I.L. No. 806876A05

For Use With Frame MGPara Usar Con Caja Base MG

1/4“ 5/16“

Cal. ISO 6789

6X 5/16”- 18 UNC X 1.75”

3TA3MG600 / 3VL9660-4TG31

3TA3MG500 / 3VL9650-4TG31

6X5/16”-18 UNC X 1.25”

4TA2MG750 / 3VL9675-4TF41

8X 5/16”-18 UNC X 3.0”

4TA3MG500 / 3VL9650-4TG418X

5/16”-18 UNC X 1.25”

3TA2MG750 / 3VL9675-4TF31

6X 5/16”- 18 UNC X 3.0”

4TA3MG600 / 3VL9660-4TG41

8X 5/16”-18 X 1.75”

8 0 6 8 7 6 A 0 5

5

3

2 / 3

4

cl i c

1 2

Trip[ Interrumpir ]

806876A05

12X 133 lb.in.[ 15 Nm ]

1/4“

A

A B

A B

6137Cu / Al

250-500 kcmil[ 120-240mm² ]

Cu / Al 600 kcmil

[ 240-300 mm² ] 9161

CUClass C

CU / ALClass B

TA2MG750 / 3VL9675-4TF013TA2MG750 / 3VL9675-4TF31 4TA2MG750 / 3VL9675-4TF41

TC3MG500 / 3VL9650-4TG11

TA3MG500 / 3VL9650-4TG013TA3MG500 / 3VL9650-4TG31 4TA3MG500 / 3VL9650-4TG41

Cu / Al 250 – 500 kcmil

[ 120 – 240 mm² ]

2.0”[ 50.8 mm ]

1.0”[ 25.4 mm ]

_ _ _ _ _ _1.0”

[ 25.4 mm ]

2.0”[ 50.8 mm ]

1.0”[ 25.4 mm ]

Wire Strip Length[ Quitar ]

Wire Connector[ Conexión del cable ]

B

Wire Size[ Rango Cable ]

Torque[ esfuerzo de

torsión ]

375 lb.in.[ 42.4 Nm ]

375 lb.in.[ 42.4 Nm ]

375 lb.in.[ 42.4 Nm ]

Cu / Al500 kcmil [ 240 mm² ]

Cu / Al 1/0 – 4 / 0 kcmil[ 70– 95 mm² ]

Cu Only 250 – 500 kcmil

[ 120 – 240 mm² ]

Cu Only 1/0 – 4 / 0 kcmil[ 70 – 95 mm² ]

A

UL 486A - 486BReq. Wire Stranding

( Cable )

9161

6137

6137

3719

3TA3MG600 / 3VL9660-4TG31 4TA3MG600 / 3VL9660-4TG41

2.0”[ 50.8 mm ]

375 lb.in.[ 42.4 Nm ]

197

1.0”[ 25.4 mm ]

Cu / Al 750 kcmil [ 300 mm² ]

Cu / Al 2 AWG [ 35 mm² ]

6137

3719

3719Cu / Al 1 - 4/0 – AWG [ 50-95 mm² ]

8

6

Turn off and lock out all power supplying this device before working on this device.Replace all covers before power supplying this device is turned on.

Couper l'alimentation de l'appareil et barrer avant de travailler.Remplacez touts les couverts avant quel'approvisionnement de pouvoir soit alimenté.

Tensión peligrosa.Puede causar la muerte o lesiones graves.

Tension dangereuse.Danger de mort ou risque de blessures graves.

Hazardous Voltage.Will cause death or serious injury.

Desenergice totalmente antes de instalar o darle servicio. Reemplace todas las barreras y cubiertas antes de energizar el interruptor.

Turn off and lock out all power supplying this device before working on this device.Replace all covers before power supplying this device is turned on.

Couper l'alimentation de l'appareil et barrer avant de travailler.Remplacez touts les couverts avant quel'approvisionnement de pouvoir soit alimenté.

Tensión peligrosa.Puede causar la muerte o lesiones graves.

Tension dangereuse.Danger de mort ou risque de blessures graves.

Hazardous Voltage.Will cause death or serious injury.

Desenergice totalmente antes de instalar o darle servicio. Reemplace todas las barreras y cubiertas antes de energizar el interruptor.

7

Subject to change without prior notice © Siemens Energy & Automation Inc. 2006Siemens Energy & Automation Inc. , Alpharetta, GA U.S.A.

Technical Support: Toll Free: 1-800-964-4114 Internet: www.sea.siemens.com

3 / 3 806876A05

For Support in Europe refer to :Bestell-Nr. / Order No.: 3ZX1012-0VL68-5AA5 Internet: www.siemens.de/lowvoltage/technical-assistance GWA-4NEB-179-6876-10-DS-06

3TA3MG600 / 3VL9660-4TG31 4TA3MG600 / 3VL9660-4TG41

ONLY[ SOLAMENTE ]

5/16“

9X 375 lb.in.[ 42 Nm ]]

4X 11 lb.in.[ 1.2 Nm ]

4X 18 lb.in.[ 2.0 Nm ]

4X 11 lb.in.[ 1.2 Nm ]