INDUSTRIAL CONTRACTOR, S de RL de CV

www.ftindustrial.com.mx

Installing theprogress of Mexicoand the world

Rigging, installation & plant relocation experts

Member of:

F&T INDUSTRIAL CONTRACTOR, S de RL de CV

F&T Industrial main objective is to

provide the industry with the best

quality in equipment installation,

relocation and fabrication.

From its opening F & T Industrial

has gained a reputation as leading

in the industry as an equipment

installer, relocator and steel

fabricator as well as logistics and

transportation services.

1

Objective

F&T INDUSTRIAL CONTRACTOR, S de RL de CV

F & T Industrial has a team with more than 15 years of experience in the field; being professional trained and capable to take the challenge

and resolve any aspect needed for an industrial project. F&T Industrial personnel philosophy is defined in 4 words: Reputation, Commitment, Experience and Satisfaction.

Every word is an important link, strong enough to stand on its own, although it becomes stronger when they work together to form the integrity of the company.

The mission of F&T Industrial is to meet and satisfy our customer needs. F&T Industrial makes it possible to relocate an entire manufacturing operation, or transport and install new equipment all over the world, wich allow us to provide quality world at competitive prices.

F&T Industrial success is based in three principles:

Principles & Philosphy

3

1People are the source of quality. With our staff of professional and self performing capabilities, we are prepared to organize, menage and complete every aspect of your project.

2Continuous improvement. Since it´s begining, F&T has been providing equipment installation, export packaging transportation and steel fabrication for a wide range of commercial, institutional and industrial customers. Mantaining as an industrial leader throughout time. This maybe only acquired with a continous improvement philosophy.

R e p u t a t i o nCommitmentEXPERIENCESatisfaction

2

F&T INDUSTRIAL CONTRACTOR, S de RL de CV

we offer you:

Services

• Complete "Turn-Key" plant relocations

• New Machinery installation

• Machinery moving

• Heavy rigging

• Press erection

• Millwright services

• Domestic and export crating

• Electrical

• Pipe-fitting

• Heavy hauling

• Steel Fabrication

• Civil work

F&T Industrial specializes in machinery moving & complete industrial plant relocations, providing the safest & most professional services.

3

F&T INDUSTRIAL CONTRACTOR, S de RL de CV

Equipment

4

To carry out task of installation,

relocations and transportation

equipment, F&T Industrial has

equipment that ensures

efficiency and accuracy in tasks

performed.

• 300 ton Power Tower Gantry.

• Forklifts from 3 to 40 ton with boom lifter.

• Industrial carry deck cranes.

• Man lifts.

• Scissor lifts.

• Trucks & all necessary tools.

Nissan Mexicana, S.A. de C.V.Aguascalientes, Ags.

• Unload and installation of one 3150 Ton UBE Injection molding machine at Plastic Facility.

• Machinery relocation and installation of the lines: Bearing Cap and Crankshaft at Motor Facility II.

• Machinery relocation and installation of the lines: Steering wheel, Multiple admision and Container Cat at Motor Facility II.

• Machinery relocation and installation of the lines: Front Cover and Assembly Motor QRK2.

• Machinery Installation of the lines: Main Floor, Engine Comparment, RR Floor and FF Flor at Body Shop facility in Nissan Mexico Plant II.

• Machinery Installation of the lines: Chassis & Trim Assembly lines in Nissan Mexico Plant II.

• Fabrication and installation of one mezzanine PBS area, chassis & trim in Nissan Mexico Plant II.

• Complete installation of the assembly line H60 in Motor facility II.

Cuernavaca, Mor. • Relocation of the lines: Cab, RR

Body, Body side of model D-22.• Fabrication and installation of

structure for reinforcing new lines model H60.

• Full installation of the line "RR body", model H60.

• Full installation of the line "Main line", model H60.

• Full installation of the line "Roller hem", model H60.

Nissan Trading Corporation Americas

Aguascalientes, Ags. • Over head crane structure

Installation with aluminum rails at Jatco Plant I.

• Installation machining line, heat treatment furnace and assembly line in transmission plant, new Jatco facility II.

• Machinery installation in 3 phases at Riken Mexico facility

Silao, Gto. • Machinery installation in

Sannohashi plant.

Irapuato, Gto.• Machinery installation in Sega

Tekkohsho plant.

Irapuato, Gto. • Machinery installation

galvanizing line, Okawa plant.

2013

F&T INDUSTRIAL CONTRACTOR, S de RL de CV

Projects

5

F & T Industrial , a Mexican company, has had the fortune to gain expertise throughout its career by serving major corporations in different industries such as the automotive, construction, food, glass, plastic, and many others. Next, we share with you some examples of the projects executed by F & T Industrial:

three Pits for 400t, 800t and 1,200 ton presses and their communication tunnels for conveying garbage.

Nissan Mexicana, S.A. de C.V.Aguascalientes, Ags.

• Preparation areas for new models QRK2 y HR-1, Engine Plant.

• Equipment installation for new camshaft line QRK-2, engine plant 2.

Cuernavaca, Mor.• Installation of automatic cell

Roller HEM door´s for model L02B y X11M, body shope plant.

• Installation of sub assemblies and welding equipment for model L02B y X11M, body shope plant.

GSN Maquinaria, Servicios CNC, S.A. de C.V.Cienega de Flores, N.L. • Technical support and several

equipment installation inside of facility NGK Ceramic, S.A. de C.V.

Zacatecas, Zac. • Relocation and installation

machinery in Ahresty Mexican Plant.

PACE Industries de México, S.A. de C.V.Saltillo, Coah. • Unload and installation platen

of the machine DCM09.• Removal machinery DCM06.• Withdrawal die of the machine

DC-10.• Injection molding machine

removal DC-05 & DC-13.• Load maneuvers injection

molding machine DC-13.

UGN de Mexico, S. de R.L. de C.V. Silao, Gto. • Four press installation.• Heidel press installation and

services.

NKP Mexico, S.A. de C.V.Celaya, Gto. • Machinery installation in

different body shop areas inside Honda Mexico.

• Supply and installation of brakers in several zones, body shop area inside Honda Mexico.

• Supply and installation of cable tray and cable for electrical connections in several zones inside Honda Mexico.

Silao, Gto. • Unload and installation of

several equipment in 3 phases inside Tritech facility.

Metalform Services Monterrey, NL • Full installation of 6 stamping

presses 1,500 tons each.• Full installation of 1 stamping

press 400 ton capacity.

FUJITA CorporationAguascalientes, Ags. • Civil work and structure

fabrication in Exedy Dynax facility.

• Fabrication and installation of base plates as well as grout application in Exedy Dynax facility.

• Design and construction of

F&T INDUSTRIAL CONTRACTOR, S de RL de CV 6

Projects

2012

metallic structure for several platforms. Aprox 600 tons

• Installation of (6) sets of miscellaneous booth.

• Installation of (2) ventilation systems BV-1 y BV-2.

• Fabrication and assembly of chimney for mixtures room.

• Provision of personnel and equipment for administration. Aprox. 120 people.

• Activities in new paint plant, DUCATO project, Chrysler de Mexico.

Windsor & Associates International, S.A. de C.V.Aguascalientes, Ags.• Unload and installation of one

under drive stamping press 2000 ton in Gstamp plant.

Puebla, Pue.• Unload and installation of one

under drive stamping press 1000 ton in Gstamp plant.

Toluca, Edo. de Mex.• Unloading and installation of

one blowing press.

Getrag Transmissión Manufacturing de México, S.A. de C.V.Irapuato, Gto.• Machinery and equipment

relocation for preparation of the second assembly line.

• Matarials supply, labor and equipment for the installation of heads and services such as compressed air, water, electricity machines, for the second assembly line.

TyssenKrupp System Engineering, GmbH Irapuato, Gto.• Mechanical and electrical

installation for mainline. • Mechanical and electrical

installation for pre-assembly line.

• Mechanical and electrical installation for testing bench.

• Mechanical and electrical installation for testing lines.

• Work performed in 2nd transmission assembly line, Getrag Transmission Manufacturing de Mexico, S.A. de C.V.

• Unload, unpacking and complete installation of: Testing bench of operation 40.9 & 50.9, inside facility of Getrag Transmission Manufacturing de Mexico, S.A. de C.V.

Kuka System de México, S. de R.L. de C.V.Saltillo, Coah.• Technical support and several

equipment installation in body shope plant, DUCATO project, inside of Chrysler de Mexico.

Metokote de México, S. de R.L. de C.V.

Querétaro, Qro.• Technical support and

equipment installation of a complete line of electrophoretic paint.

• Technical support and equipment to relocate a complete line of powder paint from San Luis Potosi to Queretaro plant.

Durr México, S.A. de C.V.Saltillo, Coah.• Fabrication and installation of

F&T INDUSTRIAL CONTRACTOR, S de RL de CV 7

Projects

Nuevo Laredo, Tamps.• Unload and installation of

several equipment and stamping presses in Rheem plant.

Liberty Steel Products, Inc.Saltillo, Coah.• Unload and installation of one

stamping press 1000 ton.

Red Boxes ServicesSilao, Gto.• Unload and installation of two

forging presses (1) 2000 ton and (1) 2500 ton, inside of American Axle plant.

Hirotec México, S.A. de C.V.Puebla, Pue.• Relocation of three (3)

Hemming presses of 300 ton each inside of Silao Guanajuato facility.

• Relocation of two (2) Hemming presses of 250 ton each from Ramos Arizpe Coahuila to Silao Guanajuato plant.

equipment in different areas as: Body Makers System, Spray System, Necker Machine, IBO Oven, Minster Press, Washer Machine, Decorator Machine, and Light Tester Machine

Liberty Steel Products, Inc.Saltillo, Coah.• Installation of 30 ton Over head

crane.• Download and installation and

start up of one 2000 Ton Press.

Commercial Vehicle Group, Inc.Saltillo, Coah.• Supply and installation of

mainline piping to supply compressed air.

• Installation of the busway.• Supply and installation drops for

auxiliary equipment.• Aligment, leveling and

interconection equipment.

Burns & McDonnell Engineering Company, Inc.Mexicali, B.C.• Supply and installation of

stainless steel pipe and black

Phoenix Machinery Movers, Inc.Puebla, Pue.• Relocation of one laser cell from

Faurecia plant to new facility.

Ramos Arizpe, Coah.• Disconnection, disassembly,

packaging and loading trucks several equipment in ZF Sach´s plant.

Cambridge Riggers, Ltd.Tlalnepantla, Edo. de Mex.• Relocation of two (2) stamping

presses fo 650 ton each from Tlanepantla Estado de Mexico to Ramos Arizpe Coahuila.

Rexam Beverage Can Americas, S.A. de C.V.

Querétaro, Qro.• Relocation of (2) Control panels

B1A & D1A.• Relocation of (1) Pin oven as well

as their electromechanical drops.

• Supply, fabrication and installation of several

F&T INDUSTRIAL CONTRACTOR, S de RL de CV 38

Projects

2011

pipe of different diameters. • Supply and installation of

ductwork for air extraction and supply.

• Unload and installation of different equipment like heat exchangers, air and water coolers, compressors and the installation of the machines for the new room seasoned.

Samsung Electronics México, S.A. de C.V.Querétaro,• Alignment and leveling of 4 presses.• Relocation of (1) HWACHEON

milling machine as well as electromechanical drops.

• Drywall installation in the engine room.

Nova Steel, Inc.Ramos Arizpe, Coah.• Donwload and installation of

one slitter line.• Download and installation of

one mill tube line.• Reconditioning of equipment

on site.

reconnecting electrical, pneumatic and mechanical.

Emerson Power SystemsReynosa, Tamps.• Receipt of machinery and

equipment.• Unload and installation of

26´pin expander and 3500 lbs press.

• Aligment, leveling and anchor equipment.

Ultra Protection Armoring MéxicoSaltillo, Coah.• Receipt of machinery and

equipment.• Unload and installation of one

Cutting Lazer Machine• Aligment, leveling and anchor

equipment.

ABB Robotics Systems Ramos Arizpe, Coah.• Supply of skilled labor,

equipment and materials to fabricate (2) dress pack left and right according with the drawings provided by customer;

• Supply of skilled labor, equipment and materials for the fabrication of one steel mezzanine, steps, structure, etc.

Continental Automotive Mexicana, S.A. de

C.V.Silao, Gto.• Unload and installation of (16)

sixteen CNC (Computer Numerical Control) (12) SW & (4) Weisser.

Sonroca, S.A. de C.V.Saltillo, Coah.• Load on trucks and

transportation for Lazer machine.

• Unload and installation of equipment.

• Aligment, leveling and anchor equipment.

Metecno, S.A. de C.V.Querétaro, Qro.• Relocation a line of the fibro

cement within the same Metecno facility included disconnecting and

F&T INDUSTRIAL CONTRACTOR, S de RL de CV 39

Projects

2010

as well as one set of safety guards.

• Supply of skilled labor to disassembly and reassembly for accesories in robot area.

Narmx Querétaro, S.A. de C.V.Querétaro, Qro.· • Civil work: Design and

construction of a Pit for the 500 ton Eagle Press.

• Mechanic work: Unload and installation of (1) 500 ton Eagle Press and (2) 250 ton Verson Press and electrical interconnection.

• Millwright: Design and construction of the Steel Pit Cover for the 500 ton Eagle Press as well as the scrap Shute construction.

Querétaro, Qro.• Design and construction of a

structural mezzanine and cement slab.

Windsor & Associates International, S.A. de C.V.San José Iturbide, Gto.• Unload and installation of (1)

• Assembly of (1) Over Head Crane for 20 Ton.

CCL Container, S.A de C.V.San José Iturbide, Gto.• Unload and installation of three

lines G1, G2 & G3 for the production of aluminum cans.

Windsor and Associates International, S.A.

de C.V.Nuevo Laredo, Tamps.• Offloading and installation of (5)

Fin press, (4) Hair pin bender, (3) Expander, (1)200 ton press, (3) 250 ton presses, (2) 300 ton presses inside of Rheem Air Conditioning Plant.

ThyssenKrupp System Engineering, S.A. de C.V. Irapuato, Gto.• Offloading, uncrating and

installation of several machinery of the next lines:

Pre-assembly, assembly and test line inside of Getrag Transmission Manufacturing Plant.

1000 ton Danly press within the Flex N Gate facility.

Red Boxes México, S.A. de C.V.León, Gto.• Mechanical disassembly and

maneuvers to load on trucks one DURR Washer machine within the VCST facility.

Kuehne & Nagel, S.A. de C.V.Acapulco, Gro.• Unload and installation of one

Control Panel.

DR ENC, S.A. de C.V.Querétaro, Qro.• Unload and installation of (9)

KMC Presses of 200 Ton, (5) KMC Presses of 250 Ton, (2) KMC Presses of 300 Ton, (5) KMC Presses of 400 Ton, (1) KMC Press of 450 Ton, (1) KMC Press of 700 Ton.

• Unload and installation of of (1) LS Mtron Plastic Injection Molding Machine of 450 Ton, LS Mtron Plastic Injection Molding Machine of 550 Ton, (1) LS Mtron Plastic Injection Molding Machine of 650 Ton.

F&T INDUSTRIAL CONTRACTOR, S de RL de CV 10

Projects

2009

Getrag Transmission Manufacturing, S.A. de C.V.

Irapuato, Gto.• Offloading and installation of

maintenance machinery, washing and materials handling.

• Supply materials, manpower and installation of electrical, pneumatic and water drops for the assembly and test lines.

Engicom S. de R.L. de C.V. Ramos Arizpe, Coah.• Offloading and installation of

several machines of the Bearing Cap Scorpion & Coyote Lines.

Cambridge Riggers Ltd.Querétaro, Qro.• Offloading and installation of (1)

600 ton stamping press and (1) 800 ton stamping press inside of VRK Queretaro Plant.

• Offloading and installation of (1) 300 ton stamping press inside of VRK Puebla Plant.

• Offloading and installation of 7 stamping presses: (3) 250 ton,

Windsor & Associates International S.A. de C.V. Querétaro, Qro.• Unload and Installation of "Tube

mill line" in new plant Arvin Meritor.

Silao, Gto.• Unload and Installation of

equipment in Deatwyler Rubber Mexico.

Ciudad de México• Disassembly and Truck load of

one Verson Press 400T in Eaton Facility.

LogikadSan Luis Potosí, S.L.P. • Assemble of one KMC Press

800T (Korea Machinery Corp.) in Posco Facility.

Kuehne & Nagel, S.A de C.V.Ciudad de México• Export Packing and trucks load

of two lathes. Toluca, Edo. de México.• 850 tons Nagel press installation

for Intier Automotive, SA of Magna group.

(3) 300 ton and (1) 200 ton, inside of Troquelados Queretaro Plant.

• Offloading and installation of (1) 600 ton stamping press, inside of Troquelados Queretaro Plant.

Meritor Mexicana S.A de C.V.El Marqués, Qro.

• Structure and Bridges rehabilitation for two overhead cranes, two for 5 ton & one for 10 ton of capacity.

• Supply and installation of two hoist 5 ton & one 10 ton of capacity.

• Preventive and maintenance policy of the overhead cranes before mentioned

ThyssenKrupp Krause, S.A de C.V. Chihuahua, Chih.• Installation of two motors

assembly lines & two engine assembly lines in Ford Motor Company

F&T INDUSTRIAL CONTRACTOR, S de RL de CV 11

Projects

2008

Inergy Automotive Systems México, S.A. de C.V.

Ramos Arizpe, Coah.• Relocation of several machines.

Mahle Componentes de Motor de México, S. de R.L. de C.V.Ramos Arizpe, Coah.• Relocation of several machines.

Johnson ControlsSaltillo, Coah.• Isocianato and silicón tanks

farm installation, pumps, pipe and fittings supply & installation.

• 8mx10mx3m steel fabrication for mezzanie, #5 and #6 line, foam area.

• Complete process equipment installation for líne #5 y #6 foam area.

Engicom, S. de R.L. de C.V. Ramos Arizpe, Coah.• Offload and Installation of

several equipment of the Scorpion Project.

FFT México, SA de CV.Puebla, Pue.• Identification, disconnection,

San Luís Potosi,SLP.• Materials supply, manufacture

and installation of structure for mezanine, at FAURECIA EXHAUST MEXICANA, SA plant.

Phoenix Machinery Movers, Inc.Puebla, Pue.• Unload and Installation of one

laser cell in Faurecia Facility.

Technotrim de México, S. de R.L. de C.V.Saltillo, Coah.• Several layout relocations,as well as #3 and #4 line

installation for foam area.

CCL Container, S.A. de C.V.Cuatlitlán, Edo. México.• Disconnection and

disassembling of P-8 line at Penetag, Canadá.

• Transportation from Canadá to Cuautitlan, Edo. de México.

• Unload and installation P-8 line equipment at CCL Container plant.

crating and load trucks of the lines GMT-166/168.

Ramos Arizpe, Coah.• Unload, Unpacking and

Installation of equipment line GMT-166/168 in Magna Stamping Facility.

Ramos Arizpe, Coah.• Project GMRA 166/168 Lowers,

body shop plant, General Motors of Mexico complex Ramos Arizpe.

• Materials supply, manufacture and installation of structure for catwalks approximately 120 tons.

• Provision, rating and installation of pipe for water of chiller and compressed air, in catwalks. As well as interconnection of pipe of main header to catwalks.

Ramos Arizpe, Coah.• Provision personnel and

supervision, equipmet necessary to performance HHR equipment relocation shotdown, floor line, body shop plant.

F&T INDUSTRIAL CONTRACTOR, S de RL de CV 12

Projects

Inmagusa, S.A. de C.V.

Castaños, Coah.• Anual maintenance as follows: > 4000 tons Danly stamping

press.> Whitney 4400 cutting machine.

Indiana Tube de México, S.A. de C.V.Ramos Arizpe, Coah.• Unload and installation of

Folder press, utilities included.

Windsor & Associates Internacional, S.A. de C.V.Nuevo Laredo, Tamps.• Disconnection, disassembling,

wood supply for exportation, load in the trailers of machining complete line in Automotive Components Holding, LLC.

León, Guanajuato• Unload, set in site, align and leveling of 6 machining stations CVST plant.

MPI Internacional, Inc.Querétaro, Qro. • Civil works (pit) for press.

San José Iturbide, Gto.• (1) 300tons injection press in

Catalina facilities.

Toluca, Estado de México.• Provision of personnel to CNC

machine installation with graphite table.

Mega Empack, S.A. de C.V.Querétaro, Qro.• Unload, set at place, align and

leveling of (2) injection cell, as well as fabrication of structure for mezanine, electrical substation, eléctrical power drops, air and water drops, for new Crispura and Colgate lines.

Contracting México IICC, S. de R.L. de C.V.Ramos Arizpe, Coah.• Teardown of existing equipment

and unload, unpacking, move final site, installation of new Alfing equipment station #10, Chrysler Engine plant.

San Luís Potosí, SLP.• Provision of personnel and

supervisión to machinery and

• Teardown of PTC 1500 tons press in Michigan, USA.• Transportation from Michigan, USA to Querétaro, Qro.• Unload and complete installation of PTC 1500 tons press.

Red Boxes Systems de México, S.A. de C.V.Querétaro ,Qro.• 800 tons Blow press installation.

Silao, Gto.• Ajax 1300 tons forge press

installation, in American Axle facilities.

• Relocation of rectifier machine and work tables, in American Axle facilities.

• Relocation Welabrador granules machine, in American Axle facilities.

Phoenix Machinery Movers, Inc.Matamoros, Tamps.• (2) 1000tons injection presses, in

Therma Tru Corporation Puertas y Vidrios, SA facilities.

F&T INDUSTRIAL CONTRACTOR, S de RL de CV 13

Projects

2007

equipment installation, new body shop plant, GMT-225 project, 2 shift, 12 hours x shift, per 8 weeks. General Motors de México facility.

• Provision of personnel and supervisión to MANN-HUMMEL filtration system equipment installation, BP-100 project in new Transmission plant. General Motors of México facility

• Material supply, provision of personnel and supervision to steel structure fabrication as supports to coolant pipe main headers and other services. BP-100 project, in new Transmission plant. General Motors of México facility.

• Material supply, provision of personnel and supervision to steel structure fabrication to load assistance (cranes), plenum mist collector and andon board. BP-200 project, in new transmission plant. General Motors of México facility.

• Provision of supervisión to machinery installation, BP-200

Aguascalientes,Ags.• Provision of personnel to repair

850 ton injection press Calsonic plant.

Zacatecas,Zac.• Provision of personnel to repair

1200 tons injection press.

O-I México, S. de R.L. de C.V. Tlajomulco de Zúñiga, Jal.• Material supply, fabrication and

installation of Mezanine. Machinery and equipment installation.

• Supply and installation of main header pipes and drops each equipment, as well as civil works.

• Supply and installation of cable tray and wires from electrical substation to main panel. As well as from main panel to each equiment.

Rapid Plastic de México, S. de R.L. de C.V.Ramos Arizpe, Coah.• Disassembling and load in the

trailer, several equipment.

project in new transmission plant. General Motors of México facility.

KMJ Machinery Movers, Inc.Ramos Arizpe, Coah.• 2000 tons Danly stamping press

installation, in Martínrea facilities.

Centennial Technology, Inc.Toluca, Edo. de México.• Provision of mechanical and

electrical personnel to assembly and installation of differents parts of injection presses. In Intier Automotive, SA Magna group.

Ube Machinery, Inc.Toluca, Edo. de México.• (1)3300 tons, (3)1100 tons,

(1)750 tons, (2)2200 tons UBE injection presses installation, in Intier Automotive, SA Magna group.

F&T INDUSTRIAL CONTRACTOR, S de RL de CV 14

Projects

2005

Lamosa Recubrimientos, S.A. de C.V.

Tlaxcala ,Tlax.• BT-500 tons press installation for

ceramic floor.

Fori Automation, Inc. Ramos Arizpe, Coah.• Manufacture of mezzanine and

installation of machinery within the facilities of Magna Formex .

• Provision of personnel and equipment for the insta

Saint Gobain Glass México, S.A. de C.V.Cuautla, Mor.• Annealing Lher system

installation (Extendería) Stein Heurtey machinery and equipment.

• Full cutting line installation (cool zone), Grenzebach machinery and equipment.

• Batch charger erection and installation.llation of machinery within the facilities of Magna Styer.

installation of pipe for water of chiller and compressed air, in catwalks. As well as interconnection of pipe of main headers to catwalks.

> Provision of supervision, mechanical personnel, tool and necessary equipment for the assembly of the following zones: Zone HA_130, HA_160, HA_170, HA_180, HA_190, HA_200, Zone BA and Zone AA.

> Summer shotdown remove and install new equipment to stations LA_180, LA_240 and LA_250.

> Disconnection of machinery in Puebla, Pue. transportation and installation of line of weld, Estampados Magna.

WM Wrigley Jr. Company, &Wrigley México, S.

de R.L. de C.V. Silao, Gto.• Installation of a complete

manufacturing plant for Wrigley’s new facility.

• Stainlees steel platform and Mixer #4 installation.

Aspel Moulding de México, S.A. de C.V.Querétaro, Qro.• Unloading and installation of

injection presses.

Moll de México, S. de R.L. de C.V. Ramos Arizpe, Coah.• Disconnection and

disassembling of 28 injection presses, it includes provision of transportation from Monterrey, NL to Ramos Arizpe, Coah.

• Unloading and complete installation of 28 injection presses, and installation of new injection presses, for 32 total in the new plant Moll Industries.

FFT México, S.A. de C.V. Ramos Arizpe, Coah.• Project GMT-319, General

Motors of México complex Ramos Arizpe.

> Provision of materials, manufacture and installation of structure for catwalks approximately 170 tons

> Provision, rating and

F&T INDUSTRIAL CONTRACTOR, S de RL de CV 14

Projects

2006

F&T INDUSTRIAL CONTRACTOR, S de RL de CV

Contact us

14

José Flores CarmonaGeneral Director jflores@ftindustrial.com.mx

Andrés Arámburo Business Development Manager - Bajio Zoneaaramburo@ftindustrial.com.mx

Gustavo SolanoBusiness Development Manager - North Zonegsolano@ftindustrial.com.mx

Félix TreviñoOperations Directorftrevino@ftindustrial.com.mx

Miguel SaucedoEstimator Managermsaucedo@ftindustrial.com.mx

Alejandro Treviño Controlleratrevino@ftindustrial.com.mx

@ email

F&T Industrial Contractor, S. de R.L. de C.V.Prol. Irlanda # 711Priv. de LuxemburgoSaltillo, Coahuila, México. C.P. 25240

HeadquartersCoahuila

Bajio RepresentationQuerétaro

OfficeLocationaddress

CorporativoPhone: +52 (844) 415 2011Fax: +52 (844) 415 2008

Bajio RepresentationPhone & Fax: +52 (442) 148 5922Nextel ID: 52*300176*9

Phone & Fax

www.ftindustrial.com.mxweb3w