INDUSTRIAL CONTRACTOR, S de RL de CV
www.ftindustrial.com.mx
Installing theprogress of Mexicoand the world
Rigging, installation & plant relocation experts
Member of:
F&T INDUSTRIAL CONTRACTOR, S de RL de CV
F&T Industrial main objective is to
provide the industry with the best
quality in equipment installation,
relocation and fabrication.
From its opening F & T Industrial
has gained a reputation as leading
in the industry as an equipment
installer, relocator and steel
fabricator as well as logistics and
transportation services.
1
Objective
F&T INDUSTRIAL CONTRACTOR, S de RL de CV
F & T Industrial has a team with more than 15 years of experience in the field; being professional trained and capable to take the challenge
and resolve any aspect needed for an industrial project. F&T Industrial personnel philosophy is defined in 4 words: Reputation, Commitment, Experience and Satisfaction.
Every word is an important link, strong enough to stand on its own, although it becomes stronger when they work together to form the integrity of the company.
The mission of F&T Industrial is to meet and satisfy our customer needs. F&T Industrial makes it possible to relocate an entire manufacturing operation, or transport and install new equipment all over the world, wich allow us to provide quality world at competitive prices.
F&T Industrial success is based in three principles:
Principles & Philosphy
3
1People are the source of quality. With our staff of professional and self performing capabilities, we are prepared to organize, menage and complete every aspect of your project.
2Continuous improvement. Since it´s begining, F&T has been providing equipment installation, export packaging transportation and steel fabrication for a wide range of commercial, institutional and industrial customers. Mantaining as an industrial leader throughout time. This maybe only acquired with a continous improvement philosophy.
R e p u t a t i o nCommitmentEXPERIENCESatisfaction
2
F&T INDUSTRIAL CONTRACTOR, S de RL de CV
we offer you:
Services
• Complete "Turn-Key" plant relocations
• New Machinery installation
• Machinery moving
• Heavy rigging
• Press erection
• Millwright services
• Domestic and export crating
• Electrical
• Pipe-fitting
• Heavy hauling
• Steel Fabrication
• Civil work
F&T Industrial specializes in machinery moving & complete industrial plant relocations, providing the safest & most professional services.
3
F&T INDUSTRIAL CONTRACTOR, S de RL de CV
Equipment
4
To carry out task of installation,
relocations and transportation
equipment, F&T Industrial has
equipment that ensures
efficiency and accuracy in tasks
performed.
• 300 ton Power Tower Gantry.
• Forklifts from 3 to 40 ton with boom lifter.
• Industrial carry deck cranes.
• Man lifts.
• Scissor lifts.
• Trucks & all necessary tools.
Nissan Mexicana, S.A. de C.V.Aguascalientes, Ags.
• Unload and installation of one 3150 Ton UBE Injection molding machine at Plastic Facility.
• Machinery relocation and installation of the lines: Bearing Cap and Crankshaft at Motor Facility II.
• Machinery relocation and installation of the lines: Steering wheel, Multiple admision and Container Cat at Motor Facility II.
• Machinery relocation and installation of the lines: Front Cover and Assembly Motor QRK2.
• Machinery Installation of the lines: Main Floor, Engine Comparment, RR Floor and FF Flor at Body Shop facility in Nissan Mexico Plant II.
• Machinery Installation of the lines: Chassis & Trim Assembly lines in Nissan Mexico Plant II.
• Fabrication and installation of one mezzanine PBS area, chassis & trim in Nissan Mexico Plant II.
• Complete installation of the assembly line H60 in Motor facility II.
Cuernavaca, Mor. • Relocation of the lines: Cab, RR
Body, Body side of model D-22.• Fabrication and installation of
structure for reinforcing new lines model H60.
• Full installation of the line "RR body", model H60.
• Full installation of the line "Main line", model H60.
• Full installation of the line "Roller hem", model H60.
Nissan Trading Corporation Americas
Aguascalientes, Ags. • Over head crane structure
Installation with aluminum rails at Jatco Plant I.
• Installation machining line, heat treatment furnace and assembly line in transmission plant, new Jatco facility II.
• Machinery installation in 3 phases at Riken Mexico facility
Silao, Gto. • Machinery installation in
Sannohashi plant.
Irapuato, Gto.• Machinery installation in Sega
Tekkohsho plant.
Irapuato, Gto. • Machinery installation
galvanizing line, Okawa plant.
2013
F&T INDUSTRIAL CONTRACTOR, S de RL de CV
Projects
5
F & T Industrial , a Mexican company, has had the fortune to gain expertise throughout its career by serving major corporations in different industries such as the automotive, construction, food, glass, plastic, and many others. Next, we share with you some examples of the projects executed by F & T Industrial:
three Pits for 400t, 800t and 1,200 ton presses and their communication tunnels for conveying garbage.
Nissan Mexicana, S.A. de C.V.Aguascalientes, Ags.
• Preparation areas for new models QRK2 y HR-1, Engine Plant.
• Equipment installation for new camshaft line QRK-2, engine plant 2.
Cuernavaca, Mor.• Installation of automatic cell
Roller HEM door´s for model L02B y X11M, body shope plant.
• Installation of sub assemblies and welding equipment for model L02B y X11M, body shope plant.
GSN Maquinaria, Servicios CNC, S.A. de C.V.Cienega de Flores, N.L. • Technical support and several
equipment installation inside of facility NGK Ceramic, S.A. de C.V.
Zacatecas, Zac. • Relocation and installation
machinery in Ahresty Mexican Plant.
PACE Industries de México, S.A. de C.V.Saltillo, Coah. • Unload and installation platen
of the machine DCM09.• Removal machinery DCM06.• Withdrawal die of the machine
DC-10.• Injection molding machine
removal DC-05 & DC-13.• Load maneuvers injection
molding machine DC-13.
UGN de Mexico, S. de R.L. de C.V. Silao, Gto. • Four press installation.• Heidel press installation and
services.
NKP Mexico, S.A. de C.V.Celaya, Gto. • Machinery installation in
different body shop areas inside Honda Mexico.
• Supply and installation of brakers in several zones, body shop area inside Honda Mexico.
• Supply and installation of cable tray and cable for electrical connections in several zones inside Honda Mexico.
Silao, Gto. • Unload and installation of
several equipment in 3 phases inside Tritech facility.
Metalform Services Monterrey, NL • Full installation of 6 stamping
presses 1,500 tons each.• Full installation of 1 stamping
press 400 ton capacity.
FUJITA CorporationAguascalientes, Ags. • Civil work and structure
fabrication in Exedy Dynax facility.
• Fabrication and installation of base plates as well as grout application in Exedy Dynax facility.
• Design and construction of
F&T INDUSTRIAL CONTRACTOR, S de RL de CV 6
Projects
2012
metallic structure for several platforms. Aprox 600 tons
• Installation of (6) sets of miscellaneous booth.
• Installation of (2) ventilation systems BV-1 y BV-2.
• Fabrication and assembly of chimney for mixtures room.
• Provision of personnel and equipment for administration. Aprox. 120 people.
• Activities in new paint plant, DUCATO project, Chrysler de Mexico.
Windsor & Associates International, S.A. de C.V.Aguascalientes, Ags.• Unload and installation of one
under drive stamping press 2000 ton in Gstamp plant.
Puebla, Pue.• Unload and installation of one
under drive stamping press 1000 ton in Gstamp plant.
Toluca, Edo. de Mex.• Unloading and installation of
one blowing press.
Getrag Transmissión Manufacturing de México, S.A. de C.V.Irapuato, Gto.• Machinery and equipment
relocation for preparation of the second assembly line.
• Matarials supply, labor and equipment for the installation of heads and services such as compressed air, water, electricity machines, for the second assembly line.
TyssenKrupp System Engineering, GmbH Irapuato, Gto.• Mechanical and electrical
installation for mainline. • Mechanical and electrical
installation for pre-assembly line.
• Mechanical and electrical installation for testing bench.
• Mechanical and electrical installation for testing lines.
• Work performed in 2nd transmission assembly line, Getrag Transmission Manufacturing de Mexico, S.A. de C.V.
• Unload, unpacking and complete installation of: Testing bench of operation 40.9 & 50.9, inside facility of Getrag Transmission Manufacturing de Mexico, S.A. de C.V.
Kuka System de México, S. de R.L. de C.V.Saltillo, Coah.• Technical support and several
equipment installation in body shope plant, DUCATO project, inside of Chrysler de Mexico.
Metokote de México, S. de R.L. de C.V.
Querétaro, Qro.• Technical support and
equipment installation of a complete line of electrophoretic paint.
• Technical support and equipment to relocate a complete line of powder paint from San Luis Potosi to Queretaro plant.
Durr México, S.A. de C.V.Saltillo, Coah.• Fabrication and installation of
F&T INDUSTRIAL CONTRACTOR, S de RL de CV 7
Projects
Nuevo Laredo, Tamps.• Unload and installation of
several equipment and stamping presses in Rheem plant.
Liberty Steel Products, Inc.Saltillo, Coah.• Unload and installation of one
stamping press 1000 ton.
Red Boxes ServicesSilao, Gto.• Unload and installation of two
forging presses (1) 2000 ton and (1) 2500 ton, inside of American Axle plant.
Hirotec México, S.A. de C.V.Puebla, Pue.• Relocation of three (3)
Hemming presses of 300 ton each inside of Silao Guanajuato facility.
• Relocation of two (2) Hemming presses of 250 ton each from Ramos Arizpe Coahuila to Silao Guanajuato plant.
equipment in different areas as: Body Makers System, Spray System, Necker Machine, IBO Oven, Minster Press, Washer Machine, Decorator Machine, and Light Tester Machine
Liberty Steel Products, Inc.Saltillo, Coah.• Installation of 30 ton Over head
crane.• Download and installation and
start up of one 2000 Ton Press.
Commercial Vehicle Group, Inc.Saltillo, Coah.• Supply and installation of
mainline piping to supply compressed air.
• Installation of the busway.• Supply and installation drops for
auxiliary equipment.• Aligment, leveling and
interconection equipment.
Burns & McDonnell Engineering Company, Inc.Mexicali, B.C.• Supply and installation of
stainless steel pipe and black
Phoenix Machinery Movers, Inc.Puebla, Pue.• Relocation of one laser cell from
Faurecia plant to new facility.
Ramos Arizpe, Coah.• Disconnection, disassembly,
packaging and loading trucks several equipment in ZF Sach´s plant.
Cambridge Riggers, Ltd.Tlalnepantla, Edo. de Mex.• Relocation of two (2) stamping
presses fo 650 ton each from Tlanepantla Estado de Mexico to Ramos Arizpe Coahuila.
Rexam Beverage Can Americas, S.A. de C.V.
Querétaro, Qro.• Relocation of (2) Control panels
B1A & D1A.• Relocation of (1) Pin oven as well
as their electromechanical drops.
• Supply, fabrication and installation of several
F&T INDUSTRIAL CONTRACTOR, S de RL de CV 38
Projects
2011
pipe of different diameters. • Supply and installation of
ductwork for air extraction and supply.
• Unload and installation of different equipment like heat exchangers, air and water coolers, compressors and the installation of the machines for the new room seasoned.
Samsung Electronics México, S.A. de C.V.Querétaro,• Alignment and leveling of 4 presses.• Relocation of (1) HWACHEON
milling machine as well as electromechanical drops.
• Drywall installation in the engine room.
Nova Steel, Inc.Ramos Arizpe, Coah.• Donwload and installation of
one slitter line.• Download and installation of
one mill tube line.• Reconditioning of equipment
on site.
reconnecting electrical, pneumatic and mechanical.
Emerson Power SystemsReynosa, Tamps.• Receipt of machinery and
equipment.• Unload and installation of
26´pin expander and 3500 lbs press.
• Aligment, leveling and anchor equipment.
Ultra Protection Armoring MéxicoSaltillo, Coah.• Receipt of machinery and
equipment.• Unload and installation of one
Cutting Lazer Machine• Aligment, leveling and anchor
equipment.
ABB Robotics Systems Ramos Arizpe, Coah.• Supply of skilled labor,
equipment and materials to fabricate (2) dress pack left and right according with the drawings provided by customer;
• Supply of skilled labor, equipment and materials for the fabrication of one steel mezzanine, steps, structure, etc.
Continental Automotive Mexicana, S.A. de
C.V.Silao, Gto.• Unload and installation of (16)
sixteen CNC (Computer Numerical Control) (12) SW & (4) Weisser.
Sonroca, S.A. de C.V.Saltillo, Coah.• Load on trucks and
transportation for Lazer machine.
• Unload and installation of equipment.
• Aligment, leveling and anchor equipment.
Metecno, S.A. de C.V.Querétaro, Qro.• Relocation a line of the fibro
cement within the same Metecno facility included disconnecting and
F&T INDUSTRIAL CONTRACTOR, S de RL de CV 39
Projects
2010
as well as one set of safety guards.
• Supply of skilled labor to disassembly and reassembly for accesories in robot area.
Narmx Querétaro, S.A. de C.V.Querétaro, Qro.· • Civil work: Design and
construction of a Pit for the 500 ton Eagle Press.
• Mechanic work: Unload and installation of (1) 500 ton Eagle Press and (2) 250 ton Verson Press and electrical interconnection.
• Millwright: Design and construction of the Steel Pit Cover for the 500 ton Eagle Press as well as the scrap Shute construction.
Querétaro, Qro.• Design and construction of a
structural mezzanine and cement slab.
Windsor & Associates International, S.A. de C.V.San José Iturbide, Gto.• Unload and installation of (1)
• Assembly of (1) Over Head Crane for 20 Ton.
CCL Container, S.A de C.V.San José Iturbide, Gto.• Unload and installation of three
lines G1, G2 & G3 for the production of aluminum cans.
Windsor and Associates International, S.A.
de C.V.Nuevo Laredo, Tamps.• Offloading and installation of (5)
Fin press, (4) Hair pin bender, (3) Expander, (1)200 ton press, (3) 250 ton presses, (2) 300 ton presses inside of Rheem Air Conditioning Plant.
ThyssenKrupp System Engineering, S.A. de C.V. Irapuato, Gto.• Offloading, uncrating and
installation of several machinery of the next lines:
Pre-assembly, assembly and test line inside of Getrag Transmission Manufacturing Plant.
1000 ton Danly press within the Flex N Gate facility.
Red Boxes México, S.A. de C.V.León, Gto.• Mechanical disassembly and
maneuvers to load on trucks one DURR Washer machine within the VCST facility.
Kuehne & Nagel, S.A. de C.V.Acapulco, Gro.• Unload and installation of one
Control Panel.
DR ENC, S.A. de C.V.Querétaro, Qro.• Unload and installation of (9)
KMC Presses of 200 Ton, (5) KMC Presses of 250 Ton, (2) KMC Presses of 300 Ton, (5) KMC Presses of 400 Ton, (1) KMC Press of 450 Ton, (1) KMC Press of 700 Ton.
• Unload and installation of of (1) LS Mtron Plastic Injection Molding Machine of 450 Ton, LS Mtron Plastic Injection Molding Machine of 550 Ton, (1) LS Mtron Plastic Injection Molding Machine of 650 Ton.
F&T INDUSTRIAL CONTRACTOR, S de RL de CV 10
Projects
2009
Getrag Transmission Manufacturing, S.A. de C.V.
Irapuato, Gto.• Offloading and installation of
maintenance machinery, washing and materials handling.
• Supply materials, manpower and installation of electrical, pneumatic and water drops for the assembly and test lines.
Engicom S. de R.L. de C.V. Ramos Arizpe, Coah.• Offloading and installation of
several machines of the Bearing Cap Scorpion & Coyote Lines.
Cambridge Riggers Ltd.Querétaro, Qro.• Offloading and installation of (1)
600 ton stamping press and (1) 800 ton stamping press inside of VRK Queretaro Plant.
• Offloading and installation of (1) 300 ton stamping press inside of VRK Puebla Plant.
• Offloading and installation of 7 stamping presses: (3) 250 ton,
Windsor & Associates International S.A. de C.V. Querétaro, Qro.• Unload and Installation of "Tube
mill line" in new plant Arvin Meritor.
Silao, Gto.• Unload and Installation of
equipment in Deatwyler Rubber Mexico.
Ciudad de México• Disassembly and Truck load of
one Verson Press 400T in Eaton Facility.
LogikadSan Luis Potosí, S.L.P. • Assemble of one KMC Press
800T (Korea Machinery Corp.) in Posco Facility.
Kuehne & Nagel, S.A de C.V.Ciudad de México• Export Packing and trucks load
of two lathes. Toluca, Edo. de México.• 850 tons Nagel press installation
for Intier Automotive, SA of Magna group.
(3) 300 ton and (1) 200 ton, inside of Troquelados Queretaro Plant.
• Offloading and installation of (1) 600 ton stamping press, inside of Troquelados Queretaro Plant.
Meritor Mexicana S.A de C.V.El Marqués, Qro.
• Structure and Bridges rehabilitation for two overhead cranes, two for 5 ton & one for 10 ton of capacity.
• Supply and installation of two hoist 5 ton & one 10 ton of capacity.
• Preventive and maintenance policy of the overhead cranes before mentioned
ThyssenKrupp Krause, S.A de C.V. Chihuahua, Chih.• Installation of two motors
assembly lines & two engine assembly lines in Ford Motor Company
F&T INDUSTRIAL CONTRACTOR, S de RL de CV 11
Projects
2008
Inergy Automotive Systems México, S.A. de C.V.
Ramos Arizpe, Coah.• Relocation of several machines.
Mahle Componentes de Motor de México, S. de R.L. de C.V.Ramos Arizpe, Coah.• Relocation of several machines.
Johnson ControlsSaltillo, Coah.• Isocianato and silicón tanks
farm installation, pumps, pipe and fittings supply & installation.
• 8mx10mx3m steel fabrication for mezzanie, #5 and #6 line, foam area.
• Complete process equipment installation for líne #5 y #6 foam area.
Engicom, S. de R.L. de C.V. Ramos Arizpe, Coah.• Offload and Installation of
several equipment of the Scorpion Project.
FFT México, SA de CV.Puebla, Pue.• Identification, disconnection,
San Luís Potosi,SLP.• Materials supply, manufacture
and installation of structure for mezanine, at FAURECIA EXHAUST MEXICANA, SA plant.
Phoenix Machinery Movers, Inc.Puebla, Pue.• Unload and Installation of one
laser cell in Faurecia Facility.
Technotrim de México, S. de R.L. de C.V.Saltillo, Coah.• Several layout relocations,as well as #3 and #4 line
installation for foam area.
CCL Container, S.A. de C.V.Cuatlitlán, Edo. México.• Disconnection and
disassembling of P-8 line at Penetag, Canadá.
• Transportation from Canadá to Cuautitlan, Edo. de México.
• Unload and installation P-8 line equipment at CCL Container plant.
crating and load trucks of the lines GMT-166/168.
Ramos Arizpe, Coah.• Unload, Unpacking and
Installation of equipment line GMT-166/168 in Magna Stamping Facility.
Ramos Arizpe, Coah.• Project GMRA 166/168 Lowers,
body shop plant, General Motors of Mexico complex Ramos Arizpe.
• Materials supply, manufacture and installation of structure for catwalks approximately 120 tons.
• Provision, rating and installation of pipe for water of chiller and compressed air, in catwalks. As well as interconnection of pipe of main header to catwalks.
Ramos Arizpe, Coah.• Provision personnel and
supervision, equipmet necessary to performance HHR equipment relocation shotdown, floor line, body shop plant.
F&T INDUSTRIAL CONTRACTOR, S de RL de CV 12
Projects
Inmagusa, S.A. de C.V.
Castaños, Coah.• Anual maintenance as follows: > 4000 tons Danly stamping
press.> Whitney 4400 cutting machine.
Indiana Tube de México, S.A. de C.V.Ramos Arizpe, Coah.• Unload and installation of
Folder press, utilities included.
Windsor & Associates Internacional, S.A. de C.V.Nuevo Laredo, Tamps.• Disconnection, disassembling,
wood supply for exportation, load in the trailers of machining complete line in Automotive Components Holding, LLC.
León, Guanajuato• Unload, set in site, align and leveling of 6 machining stations CVST plant.
MPI Internacional, Inc.Querétaro, Qro. • Civil works (pit) for press.
San José Iturbide, Gto.• (1) 300tons injection press in
Catalina facilities.
Toluca, Estado de México.• Provision of personnel to CNC
machine installation with graphite table.
Mega Empack, S.A. de C.V.Querétaro, Qro.• Unload, set at place, align and
leveling of (2) injection cell, as well as fabrication of structure for mezanine, electrical substation, eléctrical power drops, air and water drops, for new Crispura and Colgate lines.
Contracting México IICC, S. de R.L. de C.V.Ramos Arizpe, Coah.• Teardown of existing equipment
and unload, unpacking, move final site, installation of new Alfing equipment station #10, Chrysler Engine plant.
San Luís Potosí, SLP.• Provision of personnel and
supervisión to machinery and
• Teardown of PTC 1500 tons press in Michigan, USA.• Transportation from Michigan, USA to Querétaro, Qro.• Unload and complete installation of PTC 1500 tons press.
Red Boxes Systems de México, S.A. de C.V.Querétaro ,Qro.• 800 tons Blow press installation.
Silao, Gto.• Ajax 1300 tons forge press
installation, in American Axle facilities.
• Relocation of rectifier machine and work tables, in American Axle facilities.
• Relocation Welabrador granules machine, in American Axle facilities.
Phoenix Machinery Movers, Inc.Matamoros, Tamps.• (2) 1000tons injection presses, in
Therma Tru Corporation Puertas y Vidrios, SA facilities.
F&T INDUSTRIAL CONTRACTOR, S de RL de CV 13
Projects
2007
equipment installation, new body shop plant, GMT-225 project, 2 shift, 12 hours x shift, per 8 weeks. General Motors de México facility.
• Provision of personnel and supervisión to MANN-HUMMEL filtration system equipment installation, BP-100 project in new Transmission plant. General Motors of México facility
• Material supply, provision of personnel and supervision to steel structure fabrication as supports to coolant pipe main headers and other services. BP-100 project, in new Transmission plant. General Motors of México facility.
• Material supply, provision of personnel and supervision to steel structure fabrication to load assistance (cranes), plenum mist collector and andon board. BP-200 project, in new transmission plant. General Motors of México facility.
• Provision of supervisión to machinery installation, BP-200
Aguascalientes,Ags.• Provision of personnel to repair
850 ton injection press Calsonic plant.
Zacatecas,Zac.• Provision of personnel to repair
1200 tons injection press.
O-I México, S. de R.L. de C.V. Tlajomulco de Zúñiga, Jal.• Material supply, fabrication and
installation of Mezanine. Machinery and equipment installation.
• Supply and installation of main header pipes and drops each equipment, as well as civil works.
• Supply and installation of cable tray and wires from electrical substation to main panel. As well as from main panel to each equiment.
Rapid Plastic de México, S. de R.L. de C.V.Ramos Arizpe, Coah.• Disassembling and load in the
trailer, several equipment.
project in new transmission plant. General Motors of México facility.
KMJ Machinery Movers, Inc.Ramos Arizpe, Coah.• 2000 tons Danly stamping press
installation, in Martínrea facilities.
Centennial Technology, Inc.Toluca, Edo. de México.• Provision of mechanical and
electrical personnel to assembly and installation of differents parts of injection presses. In Intier Automotive, SA Magna group.
Ube Machinery, Inc.Toluca, Edo. de México.• (1)3300 tons, (3)1100 tons,
(1)750 tons, (2)2200 tons UBE injection presses installation, in Intier Automotive, SA Magna group.
F&T INDUSTRIAL CONTRACTOR, S de RL de CV 14
Projects
2005
Lamosa Recubrimientos, S.A. de C.V.
Tlaxcala ,Tlax.• BT-500 tons press installation for
ceramic floor.
Fori Automation, Inc. Ramos Arizpe, Coah.• Manufacture of mezzanine and
installation of machinery within the facilities of Magna Formex .
• Provision of personnel and equipment for the insta
Saint Gobain Glass México, S.A. de C.V.Cuautla, Mor.• Annealing Lher system
installation (Extendería) Stein Heurtey machinery and equipment.
• Full cutting line installation (cool zone), Grenzebach machinery and equipment.
• Batch charger erection and installation.llation of machinery within the facilities of Magna Styer.
installation of pipe for water of chiller and compressed air, in catwalks. As well as interconnection of pipe of main headers to catwalks.
> Provision of supervision, mechanical personnel, tool and necessary equipment for the assembly of the following zones: Zone HA_130, HA_160, HA_170, HA_180, HA_190, HA_200, Zone BA and Zone AA.
> Summer shotdown remove and install new equipment to stations LA_180, LA_240 and LA_250.
> Disconnection of machinery in Puebla, Pue. transportation and installation of line of weld, Estampados Magna.
WM Wrigley Jr. Company, &Wrigley México, S.
de R.L. de C.V. Silao, Gto.• Installation of a complete
manufacturing plant for Wrigley’s new facility.
• Stainlees steel platform and Mixer #4 installation.
Aspel Moulding de México, S.A. de C.V.Querétaro, Qro.• Unloading and installation of
injection presses.
Moll de México, S. de R.L. de C.V. Ramos Arizpe, Coah.• Disconnection and
disassembling of 28 injection presses, it includes provision of transportation from Monterrey, NL to Ramos Arizpe, Coah.
• Unloading and complete installation of 28 injection presses, and installation of new injection presses, for 32 total in the new plant Moll Industries.
FFT México, S.A. de C.V. Ramos Arizpe, Coah.• Project GMT-319, General
Motors of México complex Ramos Arizpe.
> Provision of materials, manufacture and installation of structure for catwalks approximately 170 tons
> Provision, rating and
F&T INDUSTRIAL CONTRACTOR, S de RL de CV 14
Projects
2006
F&T INDUSTRIAL CONTRACTOR, S de RL de CV
Contact us
14
José Flores CarmonaGeneral Director [email protected]
Andrés Arámburo Business Development Manager - Bajio [email protected]
Gustavo SolanoBusiness Development Manager - North [email protected]
Félix TreviñoOperations [email protected]
Miguel SaucedoEstimator [email protected]
Alejandro Treviño [email protected]
F&T Industrial Contractor, S. de R.L. de C.V.Prol. Irlanda # 711Priv. de LuxemburgoSaltillo, Coahuila, México. C.P. 25240
HeadquartersCoahuila
Bajio RepresentationQuerétaro
OfficeLocationaddress
CorporativoPhone: +52 (844) 415 2011Fax: +52 (844) 415 2008
Bajio RepresentationPhone & Fax: +52 (442) 148 5922Nextel ID: 52*300176*9
Phone & Fax
www.ftindustrial.com.mxweb3w