Instant Architectural Drainage URBAN Series Shower Grate Designer stainless steel modular drainage system, developed for easy specification and fast trouble free installation. The standard size modular components simply fit together in lineal lengths to create the perfect architectural channel drain. The flexibility of singular or multiple outlet positions can cater for all drainage applications. The 3 different grate styles of the URBAN range allow for the ultimate flexibility in use in every design situation. From the Heelguard wedge wire linear look to the discrete tile insert, the ultra modern Quattro, and the attention grabbing polished top. The URBAN series is a complete component kit which allows for the channel to be used at it’s full length, shortened to suit smaller applications or two or more kits can be easily extended with the use of the joiner plates. Base channel 1215mm long to suit a 75mm wide grate . Heelguard wedge wire grate 75mm wide 1215mm long Quattro punched stainless steel grate 75mm wide 1215mm long Tile Insert Tray 75mm wide x 1215mm long Spigot outlet, end caps, epoxy adhesive and silicone sealant. “Related products” WETT Spot Point Drain 1 2 3 4 5 URBAN SERIES Stainless Steel Shower Grates 1 2 3 4 5 6 www.wettsolutions.com.au 1 2 3 4 5 6 6 Architectural Stainless Steel Specialist Civil & General Distributors Pty Ltd Ph: 08) 9249 4733 Fax: 08) 9209 1220 Email: [email protected]27 Oxleigh Drive Malaga WA 6090
Transcript
Instant Architectural Drainage
URBAN Series Shower Grate
Designer stainless steel modular drainage system,
developed for easy specification and fast trouble free
installation. The standard size modular components
simply fit together in lineal lengths to create the perfect
architectural channel drain. The flexibility of singular
or multiple outlet positions can cater for all drainage
applications.
The 3 different grate styles of the URBAN range allow for
the ultimate flexibility in use in every design situation.
From the Heelguard wedge wire linear look to the discrete
tile insert, the ultra modern Quattro, and the attention
grabbing polished top. The URBAN series is a complete
component kit which allows for the channel to be used
at it’s full length, shortened to suit smaller applications or
two or more kits can be easily extended with the use of
the joiner plates.
Base channel 1215mm long to suit a 75mm wide grate
. Heelguard wedge wire grate 75mm wide 1215mm long
Quattro punched stainless steel grate 75mm wide 1215mm long
Tile Insert Tray 75mm wide x 1215mm long
Spigot outlet, end caps, epoxy adhesive and silicone sealant.
“Related products” WETT Spot Point Drain
1
2
3
4
5
URBAN SERIES Stainless Steel Shower Grates
1
2
3
4
5
6
www.wettsolut ions.com.au
1
2
3
4
5
6
6
Architectural Stainless Steel Specialist
Civil & General Distributors Pty LtdPh: 08) 9249 4733Fax: 08) 9209 1220Email: [email protected] Oxleigh Drive Malaga WA 6090
Instant Architectural D
rainage
3
3
12
60
31.5
85
31.5
110
31.5
Grate S
izes50
75100
The Highest Quality 316 Grade Stainless Steel,
That Is Easy To Assemble
The highest quality off-the-shelf stainless steel drainage system, developed to create
the ultimate in flexibility of design and for easy fast trouble free installation.
The 3 widths of channels com
e in standard size modular com
ponents that simply fit
together in lineal lengths to create the perfect architectural channel drain.URBAN is a kit system
and includes all the components as w
ell as epoxy glue and silicone sealant to ensure that you can assem
ble and install the drain simply and
quickly.Sim
ply decide on the Architectural finish of the style of grate, measure the length of the
channel run, and outlet location (more than one outlet can be installed if required), Then
cut the channel if required and drill out the outlet hole, file the cut edges and then glue the end caps and outlet plate into position. Finally m
easure and cut the grate to length. Now
your channel drain is ready to install.
316 Grade Stainless Steel Heelguard Grate.
Base channel 1215mm
long to suit all 3 grate options.
Stainless steel folded end caps 2 per kit.
Outlet plate 100mm
long with Spigot outlet sized in either 44m
m dia.
or 75m
m dia.
1234
ATS 5200.040:2005Cert 23100
Disclaim
er - All reasonable care has been taken with the com
pilation of this brochure. This brochure is meant as a guide only in specifying and installing U
rban drains. It is the customers responsibility to
ensure that the product is suitable for its intended purpose. Wett Solutions assum
es no responsibility for the specifications or installation of its products or for improper reliance or m
