www.homedownlights.co.nz
QUALITY INTEGRITY REASSURANCE
Interior & ExteriorLuminaire Range
ONE HOME, ONE CHOICE
www.homedownlights.co.nz A division of Gerard Lighting (NZ) Ltd.2
Downlight Classifications & Marking Labels
CA 135°C
ABUTTED ONLY
Closed & Abutted - CA ratings
CA 80°C
ABUTTED ONLY
Maximum temperature allowed on any part of the downlight that comes into contact with insulation is 80ºC.
Insulation must be abutted to the sides of the fixture.
20W max. CFL.
Blanket insulation may abut and cover these downlights.
Maximum temperature of 80ºC applies.
IC-F downlights are designed to have openings no bigger than 1mm.
No maximum temperature applies to insulation.
A fire rated downlight means that it has been tested to maintain a barrier between the room and ceiling space during a fire for 30/90 minutes.
IC- Insulation Contact i.e. can be covered
Maximum temperature allowed on any part of the downlight that comes into contact with insulation is 135ºC.
Insulation must be abutted to the sides of the fixture.
100W max. GLS.
Interior RangeHD109TCHD109/SQ/TCHD110TCHD110/SQ/TCHD122HD60Eclipse SmartLED Dimmer
LED RangeHL12-NFHL12-WFHL94LED-ICHL122LED-ICFHL109LED-ICFHL109LED/EXTPhoenix HL88F-IC Fire RatedHL-LED-LEAD Kameleon “Uni-Fit” Range
Exterior RangeArch Down HE2291BLK
Arch Up/Down HE2292BLK
Tablet Down HE2162BLK
Tablet Up/Down HE2161BLK
Linear Round HE1003SBLKRD
Hourglass Round HE1002SBLKRD
Linear Square HE1013SBLKSQ
Hourglass Square HE1012SBLKSQ
Brick Up/Down HE2041BLK “The Giants” IP66 LED Range
456 7 8 911
12 13 14 15 16 17181920-21
22 23 24 25 26 27 28 29 30 31
Paintable Ceiling Ring
Easily Removable
Double Insulated Dimmable
L E D L I G H T I N G
L E D L I G H T I N G
3
Symbol Guide:
www.homedownlights.co.nz A division of Gerard Lighting (NZ) Ltd.4
HD 109 - 100W GLS-120° -150° -180° 150° 120°
-90°
-60°
-30°
90°
60°
30°
cd/1000lm 0°Beam Angle 118° L.O.R: 75.0%
200
400
(m)
1
2
3
4
5
dia.(m)
3.33
6.66
9.99
13.32
Actual lux
237
58
26
15
2m 1m 0 1m 2m
118°
Reflectance Room Index C W F 0.75 1.0 1.25 1.50 2.0 2.5 3.0 4.0 5.070 50 20 #N/A #N/A .64 .67 .72 .75 .77 .79 .81 30 #N/A #N/A .60 .63 .68 .72 .74 .77 .79 10 #N/A #N/A .57 .60 .66 .69 .72 .75 .7750 50 20 #N/A #N/A .63 .65 .70 .72 .74 .76 .78 30 #N/A #N/A .59 .62 .67 .70 .72 .74 .76 10 #N/A #N/A .56 .59 .64 .68 .70 .73 .7530 50 20 #N/A #N/A .61 .64 .68 .70 .72 .74 .75 30 #N/A #N/A .58 .61 .65 .68 .70 .72 .74 10 #N/A #N/A .55 .59 .63 .66 .68 .71 .720 0 0 #N/A #N/A .54 .56 .61 .63 .65 .68 68
HD109TC One of NZ’s largest-selling downlights
100mm dia. hole cut out
137m
m
120mm dia. overall
OPTIONS
HD109TCPolished Silver
Reflector
HD109TC/03Satin Silver Reflector
HD10
9TC
CA 135°C
ABUTTED ONLY
HD109/13/TCPolished Chrome
Ceiling Plate
HD109TCWhite Round
Bezel (standard)
HD109/14/TCBrushed Chrome
Ceiling Plate
HD109/55/TCSilver painted
Bezel
DO NOT COVER
RoHS compliant
• Designed for 100W GLS/T2, CFL-I/70W Eco Halogen or LED Retrofit• 100mm dia. hole cut out • Complete with Thermal Cut-out control• Complies with AS/NZS60598.2.2:2001 Amendment A• CA135 classification• IP20• Weight: 330gms• Ceramic Vossloh-Schwabe E27 lampholder• Paintable round white ceiling bezel• For indoor use only NB: White Ceiling Bezel and Polished Silver Reflector fitted as standard.
5
0.5mD Minimum distance to flammable object.
www.homedownlights.co.nz A division of Gerard Lighting (NZ) Ltd.5
OPTIONS
100mm dia. hole cut out
137m
m
120 x 120mm square
HD109/SQ/TCWhite Square
Bezel (standard)
HD109/SQ/13/TCPolished Chrome
Ceiling Plate
HD109/SQ/14/TCBrushed Chrome
Ceiling Plate
HD109/SQ/55/TCSilver painted
Bezel
HD 109 - 100W GLS-120° -150° -180° 150° 120°
-90°
-60°
-30°
90°
60°
30°
cd/1000lm 0°Beam Angle 118° L.O.R: 75.0%
200
400
(m)
1
2
3
4
5
dia.(m)
3.33
6.66
9.99
13.32
Actual lux
237
58
26
15
2m 1m 0 1m 2m
118°
Reflectance Room Index C W F 0.75 1.0 1.25 1.50 2.0 2.5 3.0 4.0 5.070 50 20 #N/A #N/A .64 .67 .72 .75 .77 .79 .81 30 #N/A #N/A .60 .63 .68 .72 .74 .77 .79 10 #N/A #N/A .57 .60 .66 .69 .72 .75 .7750 50 20 #N/A #N/A .63 .65 .70 .72 .74 .76 .78 30 #N/A #N/A .59 .62 .67 .70 .72 .74 .76 10 #N/A #N/A .56 .59 .64 .68 .70 .73 .7530 50 20 #N/A #N/A .61 .64 .68 .70 .72 .74 .75 30 #N/A #N/A .58 .61 .65 .68 .70 .72 .74 10 #N/A #N/A .55 .59 .63 .66 .68 .71 .720 0 0 #N/A #N/A .54 .56 .61 .63 .65 .68 68
HD109/SQ/TCPolished Silver
Reflector
HD109/SQ/03/TCSatin Silver Reflector
HD10
9/SQ
/TC
0.5mD Minimum distance to flammable object.
DO NOT COVER
RoHS compliant
HD109/SQ/TC Popular HD109 downlight with square ceiling bezel
CA 135°C
ABUTTED ONLY
• Designed for 100W GLS/T2, CFL-I/70W Eco Halogen or LED Retrofit • 100mm dia. hole cut out• Complete with Thermal Cut-out control• Complies with AS/NZS60598.2.2:2001 Amendment A• CA135 classification• IP20• Weight: 382gms• Ceramic Vossloh-Schwabe E27 lampholder• Paintable square white ceiling bezel• For indoor use only NB: White Ceiling Bezel and Polished Silver Reflector fitted as standard.
5
www.homedownlights.co.nz A division of Gerard Lighting (NZ) Ltd.6
166m
m
100mm dia. hole cut out
HD 110 - 20W CFL-I Spiral T3
(m)
1
2
3
4
5
dia.(m)
2.51
5.02
7.53
10.04
Actual lux
228
57
25
14
2m 1m 0 1m 2m
103°
-120° -150° -180° 150° 120°
-90°
-60°
-30°
90°
60°
30°
cd/1000lm 0°Beam Angle 103° L.O.R: 52.2%
100
200
120mm dia. overall
HD11
0/TC
CA 80°C
ABUTTED ONLY
HD110TCWhite Round
Bezel (standard)
HD110/14/TC Brushed Chrome
Ceiling Plate
HD110/55/TCSilver painted
Bezel
HD110/13/TCPolished Chrome
Ceiling Plate
OPTIONS
DO NOT COVER
RoHS compliant
• Designed specifically for CFL-I lamps. Not suitable for GLS lamps• 100mm dia. hole cut out• Complete with Thermal Cut-out control• Complies with AS/NZS60598.2.2:2001 Amendment A• CA80 classification• IP20• Weight: 394gms• Ceramic Vossloh-Schwabe E27 lampholder• Paintable round white ceiling bezel• For indoor use only NB: White Ceiling Bezel and Satin Silver Reflector fitted as standard.
HD110/TC Designed specifically for CFL-I lamps
0.5mD Minimum distance to flammable object.
5
www.homedownlights.co.nz A division of Gerard Lighting (NZ) Ltd.7
HD110/SQ/TC Designed specifically for CFL-I lamp with square ceiling bezel
166m
m
100mm dia. hole cut out
120 x 120mm ceiling bezel
HD 110 - 20W CFL-I Spiral T3
(m)
1
2
3
4
5
dia.(m)
2.51
5.02
7.53
10.04
Actual lux
228
57
25
14
2m 1m 0 1m 2m
103°
-120° -150° -180° 150° 120°
-90°
-60°
-30°
90°
60°
30°
cd/1000lm 0°Beam Angle 103° L.O.R: 52.2%
100
200
HD11
0/SQ
/TC
HD110/SQ/13/TCPolished Chrome
Ceiling Plate
HD110/SQ/14/TCBrushed Chrome
Ceiling Plate
HD110/SQ/55/TCSilver painted
Bezel
HD110/SQ/TCWhite Square Bezel
(standard)
OPTIONS
DO NOT COVER
CA 80°C
ABUTTED ONLY
RoHS compliant5
• Designed specifically for CFL-I lamps. Not suitable for GLS lamps• 100mm dia. hole cut out• Complete with Thermal Cut-out control• Complies with AS/NZS60598.2.2:2001 Amendment A• CA80 classification• IP20• Weight: 394gms• Ceramic Vossloh-Schwabe E27 lampholder• Paintable round white ceiling bezel• For indoor use only NB: White Ceiling Bezel and Satin Silver Reflector fitted as standard.
0.5mD Minimum distance to flammable object.
www.homedownlights.co.nz A division of Gerard Lighting (NZ) Ltd.8
HD122/02 /TC(Polished reflector)
HD122/03/TC(Satin reflector)
HD122/02/TCPolished Silver
Reflector
HD122/03/TC Satin Silver Reflector
(m)
1
2
3
4
5
dia.(m)
2.00
4.00
6.00
8.00
Actual lux
487
121
54
30
2m 1m 0 1m 2m
90°
Reflectance Room Index C W F 0.75 1.0 1.25 1.50 2.0 2.5 3.0 4.0 5.0 70 50 20 .49 .55 .58 .61 .64 .66 .68 .70 .71 30 .45 .51 .55 .58 .62 .64 .66 .68 .69 10 .42 .48 .52 .55 .59 .62 .64 .66 .68 50 50 20 .48 .53 .57 .59 .62 .64 .66 .67 .68 30 .45 .50 .54 .57 .60 .62 .64 .66 .67 10 .42 .48 .52 .55 .58 .61 .62 .65 .66 30 50 20 .47 .52 .56 .58 .61 .62 .63 .65 .66 30 .44 .50 .53 .56 .59 .61 .62 .64 .65 10 .42 .48 .51 .54 .57 .59 .61 .63 .64 0 0 0 .41 .46 .50 .52 .55 .57 .58 .60 .61
HD 122 - 100W GLS-120° -150° -180° 150° 120°
-90°
-60°
-30°
90°
60°
30°
cd/1000lm 0°Beam Angle 90° L.O.R: 65.2%
250
500
125mm dia. hole cut out
160m
m
144mm dia. ceiling ring
OPT/13Polished Chrome
Ceiling Ring
OPT/14Brushed Chrome
Ceiling Ring
OPT/55Silver Painted Ceiling Ring
A2-CL IP54 Convex Clear Lens
/01 White trim/55 Silver trim
A2-FT IP54 Convex Frosted Lens
/01 White trim/55 Silver trim
CFL-I 18W max. lamp only
A5 IP20Halo Glass
OPT/SQ/13Polished Chrome
Ceiling Plate
OPT/SQ/14Brushed Chrome
Ceiling Plate
ACCESSORIES Order separately from downlight
OPTIONS Order separately from downlight
DO NOT COVER
CA 135°C
ABUTTED ONLY
RoHS compliant5
0.5mD Minimum distance to flammable object.
• 125mm dia. hole cut out• Complete with Thermal Cut-out control• Complies with AS/NZS60598.2.2:2001 Amendment A• CA135 classification• IP20• Weight: 380gms• Ceramic Vossloh-Schwabe E27 lampholder• For indoor use only• Paintable round white ceiling bezel
HD12
2/TC
www.homedownlights.co.nz A division of Gerard Lighting (NZ) Ltd.9
HD60TC IC rated downlight with white round ceiling bezel
HD60/RD/13Polished Chrome
Ceiling Plate Round
HD60TCWhite Round Ceiling Ring (standard)
HD60
TC
125mm dia. hole cut out
100m
m
144mm dia. overall
OPTIONS Order separately from downlight
A2-60-FT IP54Frosted Flush Lens
A2-60-CL IP54Clear Flush Lens
HD60/SQ/13Polished Chrome
Ceiling Plate Square
OPT/14Brushed Chrome
Ceiling Ring
OPT/SQ/14Brushed Chrome
Ceiling Plate
RoHS compliant
• 125mm dia. hole cut out• Thermal Cut-Out control• Complies with AS/NZS60598.2.2001 Amendment A• IC classification• IP20• Weight: 330gms• Ceramic Vossloh-Schwabe E27 lampholder• Paintable white ceiling ring NB: White Ceiling Ring and Satin Silver Reflector fitted as standard.
5
www.homedownlights.co.nz A division of Gerard Lighting (NZ) Ltd.10
Importance of Insulation Guards on IC and IC-F Rated Downlights
Ever wondered why some LED downlights have insulation guards fitted and others haven’t?
There is a very good reason reputable LED downlight manufacturers go to all the trouble and expense of designing and fitting insulation guards – to make sure the LED downlights will go the distance.
These guards are designed to keep thermal insulation from touching the heat sinks. Extensive testing has shown a gap of as little as 12mm maintained between insulation and the heat sink will result in LED junction temperatures (the most critical point) being reduced up to 22°C.
This is hugely significant in terms of LED life and performance, or “lumen depreciation” in lighting talk.
Consider this excerpt from the article “Lifetime of White LEDs” published by the US Department of Energy: “The primary cause of LED lumen depreciation is heat generated at the LED junction...Operating the LED at higher than design temperatures will significantly decrease useful life.”
If you look at the range of LED downlights on the market today you will find the majority DO NOT have insulation guards fitted. Why? Because they are imported exactly as they are sold in other countries where there are no IC or IC-F rated downlights.
Home Lighting has been testing and designing insulation guards for more than four years and you will find there is only a very small number of NZ manufacturers or importers who have gone to the same trouble.
Choose wisely and ensure your customer get the life and performance from their LED downlights, and make sure they all have insulation guards fitted.
© Home Lighting 2015. All Rights Reserved.
Mike Austin, Home Lighting’s Technical Manager and member of the Lighting Council NZ, explains the need for insulation guards on IC and IC-F rated downlights.
“The primary cause of LED lumen depreciation is
heat generated at the LED junction...Operating the
LED at higher than design temperatures will significantly
decrease useful life”.Source: US Department of Energy – Lifetime of White LEDs
Insulation Guard
www.homedownlights.co.nz A division of Gerard Lighting (NZ) Ltd.11
Eclipse SmartLED Dimmer HLDIM-ECL SmartLED phase adaptive dimmer optimised for LED-based lamps and drivers
• Fits PDL, HPM and Clipsal NZ wall switch plate apertures • Optimised for LED lighting loads• Also suitable for 12V dichroic, incandescent and dimmable CFL lamps• 400W maximum, 2W minimum LED load• Adjustment for minimum brightness level• 2-wire design - no neutral connection required• Suitable for 2-way switching• 220-240V AC• 50Hz• <1% to >95% (load dependent)
LED compatibilityThe Home Lighting Eclipse SmartLED Adaptive Phase Dimmer has been tested for compatibility with a number of common New Zealand LED lighting products and brands including, Home Lighting, Sylvania, Pierlite, Crompton, OSRAM etc. in our NZ testing facility. While we cannot test every combination and every product, Home Lighting’s Eclipse SmartLED Dimmer performs exceptionally well in a wide range of LED and non-LED lighting circuits.
If you do not get the desired performance:
• Please check carefully that the LED lighting product you are using is capable of dimming and to what level• That the circuit loading <1% to >95% is not exceeded
Contact our NZ-based Technical Support Team on 0800 733 544 or [email protected] for further assistance.
HLD
IM-E
CL
Compatible with all PDL, HPM and Clipsal switch plates. Switch plate not included.
Integrated LED indicator illuminates the dimmer knob and switch at low dimming levels.
12
3
4
HLDIM-ECLEclipse SmartLED
Dimmer
Includes:
1 x Eclipse SmartLED dimmer module
3 x Dimmer knobs
1 x PDL600 Adaptor set
Optimised for LED
5
PDL600 Adaptor Set
21 4
www.homedownlights.co.nz 12 A division of Gerard Lighting (NZ) Ltd.
L E D L I G H T I N G
RoHS compliant
ON LED MODULE
HL12-NF Compact dimmable LED gimbal downlight with Narrow Flange
HL12
-NF
CA 135°C
ABUTTED ONLY
HL12-NF/01Narrow Flange
White Finish3000K
HL12-NF/55Narrow Flange
Silver Painted Finish3000K
NB: Supplied complete with driver (not shown)
• 76mm dia. hole cut out• 12W CREE LED, 700 Lumens • 25,000 hours average lamp life• Complies with AS/NZS60598.2.2001 Amendment A• CA135• IP20• Weight: 160gms• Complete with dimmable LED driver• Dimmable on most leading and/or trailing edge and universal dimmers• Colours: Warm White 3000K & Cool White 4000K• Tiltable 30° each way• For indoor use only• White or Silver Painted finish
HL12-NF/01/4KNarrow Flange
White Finish4000K
HL12-NF/55/4KNarrow Flange
Silver Painted Finish4000K
25,000HOURS
www.homedownlights.co.nz 13 A division of Gerard Lighting (NZ) Ltd.
L E D L I G H T I N G
RoHS compliant
ON LED MODULE
HL12-WF Compact dimmable LED gimbal downlight with Wide Flange
HL12
-WF
CA 135°C
ABUTTED ONLY
HL12-WF/01Wide Flange White Finish
3000K
HL12-WF/55Wide Flange Silver
Painted Finish3000K
NB: Supplied complete with driver (not shown)
• 76-92mm dia. hole cut out• 12W CREE LED, 700 Lumens • 25,000 hours average lamp life• Complies with AS/NZS60598.2.2001 Amendment A• CA135• IP20• Weight: 180gms• Complete with dimmable LED driver• Dimmable on most leading and/or trailing edge and universal dimmers• Colours: Warm White 3000K & Cool White 4000K• Tiltable 30° each way• For indoor use only• White or Silver Painted finish
HL12-WF/01/4KWide Flange White Finish
4000K
HL12-WF/55/4KWide Flange Silver
Painted Finish4000K
25,000HOURS
www.homedownlights.co.nz 14 A division of Gerard Lighting (NZ) Ltd.
L E D L I G H T I N G
RoHS compliant
ON LED MODULE
HL94LED-ICF 12W LED Low Height dimmable downlight
HL94LED-ICWhite Round Ceiling
Ring (standard)
HL 9
4LED
-ICF
HL94LED-IC/55Silver Painted Round
Ceiling Ring
NB: Supplied complete with driver (not shown)
• 94-96mm dia. hole cut out• 12W LED, 810 Lumens• 35,000 hours average lamp life• 105° wide beam angle• Complies with AS/NZS60598.2.2:2001 Amendment A• IC-F• IP44• Weight: 320gms• Colour Temperature: 3000K• Average Lamp Life: 35,000 hrs• Complete with remote dimmable LED driver with plug to fixture• Leading & Trailing Edge and C-Bus Compatible• White or Silver Painted Finishes• Ideal for general lighting• For indoor use only• White Ceiling Bezel
0.1mD Minimum distance to flammable object.
35,000HOURS
www.homedownlights.co.nz 15 A division of Gerard Lighting (NZ) Ltd.
L E D L I G H T I N G
RoHS compliant
ON LED MODULE
HL122LED-ICF 12W LED dimmable downlight with 125mm hole cut out
NB: Supplied complete with driver (not shown)
125mm
140mm
60m
m
0.1mD Minimum distance to flammable object.
• 125mm dia. hole cut out• 12W LED, 810 lumens• 30,000 hours average lamp life• Complies with AS/NZS60598.2.2:2001 Amendment A• IC-F• IP44• Weight: 300gms• Colour Temperature: 3000K• Complete with remote dimmable LED driver• White or silver ceiling bezel • Wide beam angle perfect for general lighting• Warm white 3000K• For indoor use only
HL122LED-ICF White ceiling
bezel
HL122/55LED-ICF Silver painted ceiling bezel
HL12
2LED
-ICF
30,000HOURS
www.homedownlights.co.nz 16 A division of Gerard Lighting (NZ) Ltd.
L E D L I G H T I N G
RoHS compliant
ON LED MODULE
HL109LED-ICF 12W LED version of the popular HD109TC downlight
HL10
9LED
-ICF
100mm dia. hole cut out
73m
m
120mm dia. overall
HL109LED-IC/55Silver painted ceiling bezel
HL109LED-ICWhite ceiling
bezel (standard)
NB: Supplied complete with driver (not shown)
• 100mm dia. hole cut out• 12W LED, 810 Lumen• 35,000 hours average lamp life• Complies with AS/NZS60598.2.2:2001 Amendment A• IC-F• IP44• Weight: 345gms• Complete with dimmable LED driver• Paintable white ceiling bezel• For indoor use only• Wide beam angle perfect for general lighting• Warm white 3000K• White or Silver Painted finish NB: White Ceiling Bezel and Polished Silver Reflector fitted as standard.
0.1mD Minimum distance to flammable object.
35,000HOURS
www.homedownlights.co.nz 17 A division of Gerard Lighting (NZ) Ltd.
L E D L I G H T I N G
RoHS compliant
ON LED MODULE
HL109LED/EXT 12W LED exterior version of the HL109LED with non-corrosive polycarbonate reflector
HL10
9LED
/EXT
100mm dia. hole cut out
73m
m
120mm dia. overall
HL109LED/EXT Polycarbonate
reflector
NB: Supplied complete with driver (not shown)
• 100mm dia. hole cut out• 12W LED, 810 Lumen• 35,000 hours average lamp life• Complies with AS/NZS60598.2.2:2001 Amendment A• IC-F• Non-corrosive polycarbonate reflector• IP44• Weight: 345gms• Complete with dimmable LED driver• Paintable white ceiling bezel• For indoor or outdoor use under eaves• Wide beam angle perfect for general lighting• Warm white 3000K• White finish NB: White Ceiling Bezel fitted as standard.
0.1mD Minimum distance to flammable object.
35,000HOURS
www.homedownlights.co.nz 18 A division of Gerard Lighting (NZ) Ltd.
L E D L I G H T I N G
RoHS compliant
ON LED MODULE
Phoenix HL88F-IC 10W fire rated LED downlight
Phoe
nix
HL 8
8F-IC
NB: Supplied complete with driver (not shown)
HL88F-IC/3K3000K
HL88F-IC/4K4000K
0.1mD Minimum distance to flammable object.
• 85mm dia. hole cut out• 10W CREE LED, 600 Lumens• 30,000 hours average lamp life• Complies with AS/NZS60598.2.2:2001 (NZ only) Amendment A • 30 / 90 minute fire rated • 20° tiltable • 40° beam angle • IC• IP20• Weight: 340gms• Complete with Sylvania dimmable LED driver and insulation cover• Average Lamp Life: 30,000 hours• Steel chassis and White Bezel• Warm White (3000K) or Cool White (4000K)• For indoor use only
30,000HOURS
19
HL-LED-LEAD 300mm LED driver extension lead
HL-LED-LEAD300mm LED
driver extension lead
• 300mm length• Quick and easy to use• No fixings required
Home Lighting’s LED 300mm Extension Lead is designed to make installation of all Home Lighting LED products easier and ensure correct placement of the driver every time, preserving its life.
As all Home Lighting LED drivers must be installed above insulation this lead provides an extension to allow placement of driver on top of extra thick insulation or attaching to a building element that is further away from the downlight.
Quick and easy to use, clicks into the plugs of the driver and fitting leads with no fixings required.
This will ensure the driver and fitting are operating at correct temperatures helping to ensure the long life of your light fitting.
HL-L
ED-L
EAD
www.homedownlights.co.nz A division of Gerard Lighting (NZ) Ltd.
L E D L I G H T I N G
NB: Downlight and driver supplied separately
www.homedownlights.co.nz 20 A division of Gerard Lighting (NZ) Ltd.
L E D L I G H T I N G
RoHS compliant
ON LED MODULE
KAM 30R30° beam angle
reflector
KameleonA new range of customisable and interchangeable LED downlight combinations to suit your home.
KAM 60R 60° beam angle
reflector
KAM 30L30° beam angle
lens
KAM 60L60° beam angle
lens
12W CREE LED Module Complete with dimmable driver and customisable reflector or lens.• 12W, 740 lumens• 30,000 hours average lamp life• IC-F rated• Includes insulation cage• Warm White, 3000K• 7 Year Warranty
30,000HOURS
21
K1 90mm cutout. Round White
Gimbal Tilt Ceiling Ring
K590mm cutout. Round White
Gimbal Tilt Ceiling Ringwith Ribbed White Baffle
K2 90mm cutout. Square White
Gimbal Tilt Ceiling Ring (110x110mm)
K6 90mm cutout. Square White
Gimbal Tilt Ceiling Ring with Ribbed White Baffle
(110x110mm)
K3 90mm cutout. Round White
Gimbal Tilt Ceiling Ring with Black Baffle
K4 90mm cutout. Square White
Gimbal Tilt Ceiling Ring with Black Baffle
(110x110mm)
K9 70mm cutout. Round White
Fixed Ceiling Ring
K10 70mm cutout. Square White
Fixed Ceiling Ring (90x90mm)
K7 90mm cutout. Round White
Gimbal Tilt Ceiling Ring with Ribbed Black Baffle
K8 90mm cutout. Square White
Gimbal Tilt Ceiling Ring with Ribbed Black Baffle
(110x110mm)
www.homedownlights.co.nz 22 A division of Gerard Lighting (NZ) Ltd.
ARCH DOWN- Die-cast aluminium body- Clear glass diffuser- GU10 Max 35W- 220-240v ~ 50Hz- IP44- Matt black- Lamp sold separately- LED compatible- 68mm W x 92mm D x 81mm H
APPLICATIONS - Exterior wall
Product Code: HE2291BLK 92
81
68
2
www.homedownlights.co.nz 23 A division of Gerard Lighting (NZ) Ltd.
ARCH UP/DOWN- Die-cast aluminium body- Clear glass diffuser- GU10 Max 2 x 35W- 220-240v ~ 50Hz- IP44- Matt black- Lamp sold separately- LED compatible- 68mm W x 92mm D x 150mm H
APPLICATIONS - Exterior wall
Product Code: HE2292BLK
150
92
68
2
www.homedownlights.co.nz 24 A division of Gerard Lighting (NZ) Ltd.
TABLET DOWN- Die-cast aluminium body- Frosted glass diffuser- 3 x 1W LEDs warm white- 220-240v ~ 50Hz- IP44- Matt black- LED- 95mm W x 82mm D x 198mm H
APPLICATIONS - Exterior wall
Product Code: HE2162BLK
2
www.homedownlights.co.nz 25 A division of Gerard Lighting (NZ) Ltd.
TABLET UP/DOWN- Die-cast aluminium body- Frosted glass diffuser- 6 x 1W LEDs warm white- 220-240v ~ 50Hz- IP44- Matt black- LED- 95mm W x 82mm D x 198mm H
APPLICATIONS - Exterior wall
Product Code: HE2161BLK
2
www.homedownlights.co.nz 26 A division of Gerard Lighting (NZ) Ltd.
LINEAR ROUND- Die-cast aluminium body- Opal PC diffuser- 3 x 1W LEDs warm white- 220-240v ~ 50Hz- IP44- Matt black- LED- 140mm dia., 55mm D
APPLICATIONS - Exterior wall
Product Code: HE1003SBLKRD
2
www.homedownlights.co.nz 27 A division of Gerard Lighting (NZ) Ltd.
HOURGLASS ROUND- Die-cast aluminium body- Opal PC diffuser- 3 x 1W LEDs warm white- 220-240v ~ 50Hz- IP44- Matt black- LED- 140mm dia., 55mm D
APPLICATIONS - Exterior wall
Product Code: HE1002SBLKRD
2
www.homedownlights.co.nz 28 A division of Gerard Lighting (NZ) Ltd.
LINEAR SQUARE- Die-cast aluminium body- Opal PC diffuser- 3 x 1W LEDs warm white- 220-240v ~ 50Hz- IP44- Matt black- LED- 140mm W x 53mm D x 140mm H
APPLICATIONS - Exterior wall
Product Code: HE1013SBLKSQ
2
www.homedownlights.co.nz 29 A division of Gerard Lighting (NZ) Ltd.
HOURGLASS SQUARE- Die-cast aluminium body- Opal PC diffuser- 3 x 1W LEDs warm white- 220-240v ~ 50Hz- IP44- Matt black- LED- 140mm W x 53mm D x 140mm H
APPLICATIONS - Exterior wall
Product Code: HE1012SBLKSQ
2
www.homedownlights.co.nz 30 A division of Gerard Lighting (NZ) Ltd.
BRICK UP/DOWN- Die-cast aluminium body- Frosted glass diffuser- 6 x 1W LEDs warm white- 220-240v ~ 50Hz- IP44- Matt black- LED
APPLICATIONS - Exterior wall
Product Code: HE2041BLK
110
71
172
2
www.homedownlights.co.nz 31 A division of Gerard Lighting (NZ) Ltd.
‘The Giants’ IP66 Exterior Range 12W LED IP66 Round and Oval Ceiling/Wall Lights
KauriHERCL/BLKLED Round, Black*
• 12W LED• 840 lumens• IP66 weather protection• 20,000 hours average lamp life• Non-corrosive polycarbonate housing• Opal diffuser• Indoor or outdoor use • 3000K Warm White• Sensor option available (on Kauri or Rimu only)• Oval 290 x 200 x 100mm or Round ø300 x 100mm• Black or White• 2 Year Warranty
20,000HOURS2
RimuHERCL/WHLED Round, White*
ManukaHEOCL/BLKLED
Oval, Black
TotaraHEOCL/BLKLED
Oval, White
* Sensor options available
© H
ome
Light
ing
2015
www.homedownlights.co.nz
For more informationPhone 0800 733 544
Fax 09 525 [email protected]
QUALITY INTEGRITY REASSURANCE
ONE HOME, ONE CHOICE