JMV’s Silicon Gel Based Cable Jointing Kit JMV’s Silicon Gel Based Cable Jointing Kit
Provide quick and reliable jointing of cables with self-sealing polymer insulation.Provide safe electrical connections between two nodes or electric circuit.An efficient solution for all LT Cables, unarmoured & armoured cables buried, outdoor,
underwater or laying. UV radiation and atmospheric contamination resistance. High resistivity and dielectric strength (Upto 23 kV/mm).
Technical Properties of Cable Jointer Technical Properties of Cable Jointer
High Dielectric Strength of 23 kV/mm
Suitable for low voltage up to 11 kV
Water tight protection (IP68 compliant)
Ability to cross link at temperatures -100 C to 550 C
Insulation Material PVC is Fire Retardant as per UL 94 V1
No decomposition will take place in the temperature range from 400 C to 2000 C
Termite proof material of construction
Fungus Resistant and Chemical Resistant
No Environmental stress cracking
Offering product life of minimum 25 years in every environmental conditions.
Advantages of Cable Jointer Advantages of Cable Jointer
No environmental impact.
Easy and time saving operation.
No temperature (heat, humidity etc.) impact.
The kit has high repeat value and can be use multiple times.
During fault conditions the joint repairing is much more easier.
Compact casing which eliminates the chances of electrocution.
Single kit can be use for multiple conductors & for multiple connections.
In case of manual mistake (loose connections) the current will not spread outside the casing.
Applications of Cable JointerApplications of Cable Jointer
Applications of Cable JointerApplications of Cable Jointer
Applications of Cable JointerApplications of Cable Jointer
For More Information : For More Information :
Website : www.jmv.co.in
Email : [email protected], [email protected]