8/14/2019 Interview TCE

1/19

Angles and Angle Pairs

How are angles and angle pairs used in civil engineering?

View Question | Asked by :pipeds

Answer Question Subscribe

Hume pipes

What is meant by HUME in RCC Hume pipes?

Latest Answer: Hume in RCC hume pipes refers to soil i.e RCC hume pipe refers to

reinforced soil pipes. Generally these pipes are used for sewage purposes. ...

Read Answers (1) | Asked by :kiranchiniavar

Answer Question Subscribe

Concrete Cube Test

Why is the concrete cube tested for weight before compression test?

Latest Answer: The basic reason for the weight calculation is to check for density

as if the prescribed density is not the same as the density as calculated from

the weight calculated then the compression test is not useful to do as the

concrete cannot be used for building ...

Read Answers (3) | Asked by :jraman

Answer Question Subscribe

DMC Pile Foundation

How DMC Pile Foundation is done?

Latest Answer: It is Direct Mud Circulation pile, where water jet is let through the

piling chiesel which comes out from bottom with Mud ...

Read Answers (1) | Asked by :perfectclt

Answer Question Subscribe

Building Wall Cracks

http://www.geekinterview.com/question_details/76429http://www.geekinterview.com/question_details/76429http://www.geekinterview.com/user-profile/368523http://www.geekinterview.com/question_details/76429/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/76364http://www.geekinterview.com/question_details/76364http://www.geekinterview.com/user-profile/367534http://www.geekinterview.com/user-profile/367534http://www.geekinterview.com/question_details/76364/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/76323http://www.geekinterview.com/question_details/76323http://www.geekinterview.com/user-profile/366887http://www.geekinterview.com/user-profile/366887http://www.geekinterview.com/question_details/76323/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/75743http://www.geekinterview.com/question_details/75743http://www.geekinterview.com/user-profile/357098http://www.geekinterview.com/user-profile/357098http://www.geekinterview.com/question_details/75743/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/75658http://www.geekinterview.com/question_details/76429http://www.geekinterview.com/user-profile/368523http://www.geekinterview.com/question_details/76429/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/76364http://www.geekinterview.com/question_details/76364http://www.geekinterview.com/user-profile/367534http://www.geekinterview.com/question_details/76364/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/76323http://www.geekinterview.com/question_details/76323http://www.geekinterview.com/user-profile/366887http://www.geekinterview.com/question_details/76323/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/75743http://www.geekinterview.com/question_details/75743http://www.geekinterview.com/user-profile/357098http://www.geekinterview.com/question_details/75743/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/75658http://www.geekinterview.com/question_details/76429

8/14/2019 Interview TCE

2/19

When you find lot of cracks on the completed apartment wall, How will you

arrest them?

View Question | Asked by : multisahajaabuilders

Answer Question Subscribe

Structural Designer and Structural Consultant

What is the difference between a Structural Designer and a Structural

Consultant?

Latest Answer: A structural consultant is a person who will look through the

designs and also would analyse different aspects and will help you in any

problem related to structures (may be mega structures or simple structures).On the other hand a structural designer ...

Read Answers (1) | Asked by :purvi.tulsian

Answer Question Subscribe

Bending Moment

What is bending moment?

View Question | Asked by : rajdhiman85

Answer Question Subscribe

Rein Forced Concrete

What method needs to be adopted for designing Water Retaining structures?

Latest Answer: Because the shape effect is the least for the 15cm cube and we

get a fairly accurate idea of the strength of the concrete as such. ...

Read Answers (2) | Asked by :lx immanuel

Answer Question Subscribe

SBC Value

What is SBC Value?

http://www.geekinterview.com/question_details/75658http://www.geekinterview.com/user-profile/355440http://www.geekinterview.com/question_details/75658/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/75322http://www.geekinterview.com/question_details/75322http://www.geekinterview.com/user-profile/349000http://www.geekinterview.com/user-profile/349000http://www.geekinterview.com/question_details/75322/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/74788http://www.geekinterview.com/question_details/74788http://www.geekinterview.com/user-profile/339858http://www.geekinterview.com/question_details/74788/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/74762http://www.geekinterview.com/question_details/74762http://www.geekinterview.com/user-profile/339004http://www.geekinterview.com/user-profile/339004http://www.geekinterview.com/question_details/74762/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/74741http://www.geekinterview.com/question_details/75658http://www.geekinterview.com/user-profile/355440http://www.geekinterview.com/question_details/75658/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/75322http://www.geekinterview.com/question_details/75322http://www.geekinterview.com/user-profile/349000http://www.geekinterview.com/question_details/75322/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/74788http://www.geekinterview.com/question_details/74788http://www.geekinterview.com/user-profile/339858http://www.geekinterview.com/question_details/74788/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/74762http://www.geekinterview.com/question_details/74762http://www.geekinterview.com/user-profile/339004http://www.geekinterview.com/question_details/74762/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/74741

8/14/2019 Interview TCE

3/19

Latest Answer: SBC is the safe bearing capacity of a soil, beyond this value if soil

is loaded, it will fail to bear the load applied on it and will fail. Its value can be

found out by standard penetration test, plate load test or cone penetration

test. ...Read Answers (1) | Asked by :Vimlesh.1981

Answer Question Subscribe

Platform for Dump

The total load proposed on the platform is 40kN/m2. and the plan is 17ft

width, 30ft length. What should be the thickness of the beam, slab? The

platform is for a compactor.View Question | Asked by : ntayethein1751964

Answer Question Subscribe

4-Lane Expressway

How many layers are required for a 4-lane Expressway in general? What are

they?

Latest Answer: There are 4 layers.1.) Bitumen layer2.) Concrete3.) Metal bed4.)Gravel ...

Read Answers (2) | Asked by :venkatcvl

Answer Question Subscribe

Compaction Measure

How to measure the compaction in high way base and sub-base and please

inform what are the new techniques to measure compaction?Latest Answer: Sand Replacement ...

Read Answers (1) | Asked by :basitbhutto

Answer Question Subscribe

Duties and Responsibilities of Civil Site Engineer

http://www.geekinterview.com/question_details/74741http://www.geekinterview.com/user-profile/338768http://www.geekinterview.com/user-profile/338768http://www.geekinterview.com/question_details/74741/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/74539http://www.geekinterview.com/question_details/74539http://www.geekinterview.com/user-profile/335354http://www.geekinterview.com/question_details/74539/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/74309http://www.geekinterview.com/question_details/74309http://www.geekinterview.com/user-profile/280302http://www.geekinterview.com/user-profile/280302http://www.geekinterview.com/question_details/74309/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/74144http://www.geekinterview.com/question_details/74144http://www.geekinterview.com/user-profile/328576http://www.geekinterview.com/user-profile/328576http://www.geekinterview.com/question_details/74144/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/73581http://www.geekinterview.com/question_details/74741http://www.geekinterview.com/user-profile/338768http://www.geekinterview.com/question_details/74741/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/74539http://www.geekinterview.com/question_details/74539http://www.geekinterview.com/user-profile/335354http://www.geekinterview.com/question_details/74539/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/74309http://www.geekinterview.com/question_details/74309http://www.geekinterview.com/user-profile/280302http://www.geekinterview.com/question_details/74309/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/74144http://www.geekinterview.com/question_details/74144http://www.geekinterview.com/user-profile/328576http://www.geekinterview.com/question_details/74144/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/73581

8/14/2019 Interview TCE

4/19

What are the duties and responsibilities of civil site engineer in road and

building construction?

Latest Answer: Site engineer should determine,* SAFE BEARING CAPACITY of the

soil to check whether the soil is capable of with standing the loads given by thesuper structures. * In case of construction of underpasses, deep excavations are

necessary, for that a deep ...

Read Answers (3) | Asked by :kamal agra

Answer Question Subscribe

Open Foundation

What is Open Foundation?Latest Answer: Shallow Foundation ...

Read Answers (1) | Asked by :royaljagjit

Answer Question Subscribe

Steel Piling

What is Steel Piling? What is the installation procedure?

View Question | Asked by : civil.chakri

Answer Question Subscribe

Steel Structures in Transmiission lines

What is the Difference between G.I and M.S steel and what is mixing

component?

View Question | Asked by : PRABHU PONSUBBU

Answer Question Subscribe

PCC

Why we need to do PCC?

Latest Answer: 1. To avoid direct contact of foundation with soil2. Some time it

can decrease the stresses to the soil ...

http://www.geekinterview.com/question_details/73581http://www.geekinterview.com/user-profile/318956http://www.geekinterview.com/user-profile/318956http://www.geekinterview.com/question_details/73581/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/73467http://www.geekinterview.com/question_details/73467http://www.geekinterview.com/user-profile/317180http://www.geekinterview.com/user-profile/317180http://www.geekinterview.com/question_details/73467/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/73418http://www.geekinterview.com/question_details/73418http://www.geekinterview.com/user-profile/316075http://www.geekinterview.com/question_details/73418/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/73245http://www.geekinterview.com/question_details/73245http://www.geekinterview.com/user-profile/313439http://www.geekinterview.com/question_details/73245/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/73201http://www.geekinterview.com/question_details/73581http://www.geekinterview.com/user-profile/318956http://www.geekinterview.com/question_details/73581/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/73467http://www.geekinterview.com/question_details/73467http://www.geekinterview.com/user-profile/317180http://www.geekinterview.com/question_details/73467/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/73418http://www.geekinterview.com/question_details/73418http://www.geekinterview.com/user-profile/316075http://www.geekinterview.com/question_details/73418/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/73245http://www.geekinterview.com/question_details/73245http://www.geekinterview.com/user-profile/313439http://www.geekinterview.com/question_details/73245/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/73201

8/14/2019 Interview TCE

5/19

Read Answers (4) | Asked by :manmohansingh

Answer Question Subscribe

Soil Mechanics

What is Quick Sand Condition?

Latest Answer: Sudden loss of shear strength is what results in quick sand

condition. ...

Read Answers (2) | Asked by :madan99280

Answer Question Subscribe

Oscillation Test in Crane

What is the procedure/method to do the oscillation test? Is there any limitation

to do this test?

View Question | Asked by : vasujoshi123

Answer Question Subscribe

Workability of Concrete

What can be the slump value in the case of following members as per IS

recommendations1. Slab2. Beam3. Column4. Dam

Latest Answer: Slab-90mmBeam-80mmColumn-95 mmDam-110 -130mmNow-a-days

people are using zero slump concrete (slumpless concrete) in dams ...

Read Answers (2) | Asked by :janakcivilengg

Answer Question Subscribe

Permissible Length of Weld

What is the permissible length of weld for reinforcing bars in RCC mmembers as

per I.S. Code.

Latest Answer: As per IS standard the weld length is 6d. ...

Read Answers (1) | Asked by :gchhawsaria

http://www.geekinterview.com/question_details/73201http://www.geekinterview.com/user-profile/312648http://www.geekinterview.com/user-profile/312648http://www.geekinterview.com/question_details/73201/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/73048http://www.geekinterview.com/question_details/73048http://www.geekinterview.com/user-profile/309715http://www.geekinterview.com/user-profile/309715http://www.geekinterview.com/question_details/73048/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/72964http://www.geekinterview.com/question_details/72964http://www.geekinterview.com/user-profile/308372http://www.geekinterview.com/question_details/72964/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/72441http://www.geekinterview.com/question_details/72441http://www.geekinterview.com/user-profile/295127http://www.geekinterview.com/user-profile/295127http://www.geekinterview.com/question_details/72441/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/72339http://www.geekinterview.com/question_details/72339http://www.geekinterview.com/user-profile/295116http://www.geekinterview.com/user-profile/295116http://www.geekinterview.com/question_details/73201http://www.geekinterview.com/user-profile/312648http://www.geekinterview.com/question_details/73201/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/73048http://www.geekinterview.com/question_details/73048http://www.geekinterview.com/user-profile/309715http://www.geekinterview.com/question_details/73048/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/72964http://www.geekinterview.com/question_details/72964http://www.geekinterview.com/user-profile/308372http://www.geekinterview.com/question_details/72964/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/72441http://www.geekinterview.com/question_details/72441http://www.geekinterview.com/user-profile/295127http://www.geekinterview.com/question_details/72441/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/72339http://www.geekinterview.com/question_details/72339http://www.geekinterview.com/user-profile/295116

8/14/2019 Interview TCE

6/19

Answer Question Subscribe

Concreting in Water logged area

What is the method and means for concreting in water logged area?

Latest Answer: By Trimmi Pipe Method. ...

Read Answers (1) | Asked by :janakcivilengg

Answer Question Subscribe

Concrete Cube

The size of concrete cube is 150mm x 150mm x 150mm as per Indian Standards.

Why?

View Question | Asked by : gchhawsaria

Answer Question Subscribe

Cement Test

What is the volume of mould in VICAT's Apparatus for cement test as per Indian

Standards.

Latest Answer: This test is conducted to determine the percentage of water

required for preparing cement test.* The volume of mould required is 300gm of

cement and 30% by weight or 90gm of water is added to it. these ingredients

are mixed thoroughly.* Thus the required ...

Read Answers (1) | Asked by :gchhawsaria

Answer Question Subscribe

Grade of PPC cement

Why is the grade of PPC cement is not mentiond or defined as per Indian

Standard" IS 1489-1991.

Latest Answer: Portlandland Pozolana Cement is manufactured by blending a

mixure of ordinary Portland Cement and Pozolana material such as fly ash not

http://www.geekinterview.com/question_details/72339/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/72253http://www.geekinterview.com/question_details/72253http://www.geekinterview.com/user-profile/295127http://www.geekinterview.com/user-profile/295127http://www.geekinterview.com/question_details/72253/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/72251http://www.geekinterview.com/question_details/72251http://www.geekinterview.com/user-profile/295116http://www.geekinterview.com/question_details/72251/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/72250http://www.geekinterview.com/question_details/72250http://www.geekinterview.com/user-profile/295116http://www.geekinterview.com/user-profile/295116http://www.geekinterview.com/question_details/72250/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/72249http://www.geekinterview.com/question_details/72339/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/72253http://www.geekinterview.com/question_details/72253http://www.geekinterview.com/user-profile/295127http://www.geekinterview.com/question_details/72253/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/72251http://www.geekinterview.com/question_details/72251http://www.geekinterview.com/user-profile/295116http://www.geekinterview.com/question_details/72251/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/72250http://www.geekinterview.com/question_details/72250http://www.geekinterview.com/user-profile/295116http://www.geekinterview.com/question_details/72250/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/72249

8/14/2019 Interview TCE

7/19

less than 15% by weight of cement. The finess of PPC will be greater than

OPC. ...

Read Answers (3) | Asked by :gchhawsaria

Answer Question Subscribe

Volumes of Wet and Dry Sand

How to differentiate the volumes of wet and dry sand / soil?

Latest Answer: Take a cylinder with marking of measurement fill it with sand up

to fixed height then add water full to complete saturate the sand than measure

the volume of sand now take difference in volume of sand before water and

after water added i.e. bulkage of ...Read Answers (2) | Asked by :sharphrv

Answer Question Subscribe

Volumes of Wet and Dry Sand

How to differentiate the volumes of wet and dry sand / soil?

View Question | Asked by : sundeepanu

Answer Question Subscribe

Soil Bearing Capacity

What is the bearing capacity of soil?

Latest Answer: Soil Bearing Capacity is defined the load which the soil can take

safely without deformattion. It is also termed as bearing capacity of soil. ...

Read Answers (1) | Asked by :marukurthi

Answer Question Subscribe

Laying Foundation

Outline step by step procedure of laying the foundation.

Latest Answer: After the set out is done, excavation at the determined point are

done. the density of the soil are determined. if ok, the concrete blinding are

http://www.geekinterview.com/question_details/72249http://www.geekinterview.com/user-profile/295116http://www.geekinterview.com/user-profile/295116http://www.geekinterview.com/question_details/72249/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/71837http://www.geekinterview.com/question_details/71837http://www.geekinterview.com/user-profile/279862http://www.geekinterview.com/user-profile/279862http://www.geekinterview.com/question_details/71837/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/71614http://www.geekinterview.com/question_details/71614http://www.geekinterview.com/user-profile/284310http://www.geekinterview.com/question_details/71614/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/71528http://www.geekinterview.com/question_details/71528http://www.geekinterview.com/user-profile/282417http://www.geekinterview.com/user-profile/282417http://www.geekinterview.com/question_details/71528/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/71339http://www.geekinterview.com/question_details/72249http://www.geekinterview.com/user-profile/295116http://www.geekinterview.com/question_details/72249/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/71837http://www.geekinterview.com/question_details/71837http://www.geekinterview.com/user-profile/279862http://www.geekinterview.com/question_details/71837/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/71614http://www.geekinterview.com/question_details/71614http://www.geekinterview.com/user-profile/284310http://www.geekinterview.com/question_details/71614/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/71528http://www.geekinterview.com/question_details/71528http://www.geekinterview.com/user-profile/282417http://www.geekinterview.com/question_details/71528/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/71339

8/14/2019 Interview TCE

8/19

done before placing the reinforcement start up are placed with the framework

...

Read Answers (1) | Asked by :sharphrv

Answer Question Subscribe

Design Mix

What is the procedure of design mix?

View Question | Asked by : sharphrv

Answer Question Subscribe

Platform for dump

The total load proposed on the platform is 40kN/m2. and the plan is 17ft

width, 30ft lenght. What should be the thickness of the beam, slab. the

platform is for a compactor

View Question | Asked by : morbrasconsult

Answer Question Subscribe

Building Cracks

What causes cracks in a building? What is the lasting solution to stop the

cracks. the cracks show on the beam and block wall

Latest Answer: In walls1. Shear cracks 2. Settlement cracksTo overcome these

created cracks use 1. Filling adhesive materials. 2. If the crack is exceed 2mm

then use chicken net or polymer strips.In beams1. Design calculation failure. 2.

Sagging failureTo overcome ...

Read Answers (1) | Asked by :morbrasconsult

Answer Question Subscribe

Design Mix

What is the procedure of design mix?

http://www.geekinterview.com/question_details/71339http://www.geekinterview.com/user-profile/279862http://www.geekinterview.com/user-profile/279862http://www.geekinterview.com/question_details/71339/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/71338http://www.geekinterview.com/question_details/71338http://www.geekinterview.com/user-profile/279862http://www.geekinterview.com/question_details/71338/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/70669http://www.geekinterview.com/question_details/70669http://www.geekinterview.com/user-profile/257759http://www.geekinterview.com/question_details/70669/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/70668http://www.geekinterview.com/question_details/70668http://www.geekinterview.com/user-profile/257759http://www.geekinterview.com/user-profile/257759http://www.geekinterview.com/question_details/70668/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/70348http://www.geekinterview.com/question_details/71339http://www.geekinterview.com/user-profile/279862http://www.geekinterview.com/question_details/71339/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/71338http://www.geekinterview.com/question_details/71338http://www.geekinterview.com/user-profile/279862http://www.geekinterview.com/question_details/71338/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/70669http://www.geekinterview.com/question_details/70669http://www.geekinterview.com/user-profile/257759http://www.geekinterview.com/question_details/70669/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/70668http://www.geekinterview.com/question_details/70668http://www.geekinterview.com/user-profile/257759http://www.geekinterview.com/question_details/70668/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/70348

8/14/2019 Interview TCE

9/19

Latest Answer: Design Mix of concrete is an important process to determine

the quantity of constituents of the concrete such as cement, aggregate, sand,

water as per the grade of the concrete in order to achieve the conglomerate

compound. Even the phrase itself advised ...Read Answers (2) | Asked by :vrjadhav123

Answer Question Subscribe

Rolling Constant

What is Rolling Constant?

View Question | Asked by : vrjadhav123

Answer Question Subscribe

Inverted T-Beam

When we go for inverted T- beam for slab?

Latest Answer: We provide inverted T-beam in places like portico. the condition is

when their is compression in upper zone & tension in bottom zone then we

provide inverted T-beam. ...

Read Answers (1) | Asked by :amit_ald

Answer Question Subscribe

RCC - Column, SLA, Beams and Cover

Explain what are Column, SLA, Beams and Cover?

Latest Answer: Column is a vertical compressive member which takes vertical

loads from the slabs, beams, etc.Beamsare horizantal tensile members that

takes shear forces and b.m's from the slabs.Cover is the spacing between the

c/c of the reinforcement provided in tensile ...

Read Answers (4) | Asked by :cool.aruna

Answer Question Subscribe

Laying Foundation

http://www.geekinterview.com/question_details/70348http://www.geekinterview.com/user-profile/240820http://www.geekinterview.com/user-profile/240820http://www.geekinterview.com/question_details/70348/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/68766http://www.geekinterview.com/question_details/68766http://www.geekinterview.com/user-profile/240820http://www.geekinterview.com/question_details/68766/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/68439http://www.geekinterview.com/question_details/68439http://www.geekinterview.com/user-profile/236320http://www.geekinterview.com/user-profile/236320http://www.geekinterview.com/question_details/68439/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/68163http://www.geekinterview.com/question_details/68163http://www.geekinterview.com/user-profile/232722http://www.geekinterview.com/user-profile/232722http://www.geekinterview.com/question_details/68163/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/68087http://www.geekinterview.com/question_details/70348http://www.geekinterview.com/user-profile/240820http://www.geekinterview.com/question_details/70348/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/68766http://www.geekinterview.com/question_details/68766http://www.geekinterview.com/user-profile/240820http://www.geekinterview.com/question_details/68766/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/68439http://www.geekinterview.com/question_details/68439http://www.geekinterview.com/user-profile/236320http://www.geekinterview.com/question_details/68439/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/68163http://www.geekinterview.com/question_details/68163http://www.geekinterview.com/user-profile/232722http://www.geekinterview.com/question_details/68163/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/68087

8/14/2019 Interview TCE

10/19

Outline step by step procedure of laying the foundation.

Latest Answer: First we have to prepare the work spot then it should be

consolidated with water and then the bearing capacity should be checked p.c.c

should be layed and toughly compacted then the reinforcement should be fixedto the correct position. ...

Read Answers (1) | Asked by :swetcha2

Answer Question Subscribe

What will happen to the structure

if a tall structure subjected to only dead load and live load. there is no

earthquake or wind load on the structure.a)settlement in internalstructureb)settlement in external structurec)differential

settlementd)none.and

Latest Answer: It will exert differential settlement. ...

Read Answers (2) | Asked by :s_kr_narang

Answer Question Subscribe

Soil foundations

What are the types of foundations used for different kinds of Soil?

Latest Answer: Basically there are two type of foundations according their depths

a. Shallow foundations b. Deep foundations Shallow foundations are the

foundation which are not at greater depths and deeper foundations are the

foundations at greater depths. According ...

Read Answers (1) | Asked by :bestrcsekhar

Answer Question Subscribe

General idea of construction of a high riser

http://www.geekinterview.com/question_details/68087http://www.geekinterview.com/user-profile/231635http://www.geekinterview.com/user-profile/231635http://www.geekinterview.com/question_details/68087/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/67508http://www.geekinterview.com/question_details/67508http://www.geekinterview.com/user-profile/223532http://www.geekinterview.com/user-profile/223532http://www.geekinterview.com/question_details/67508/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/65811http://www.geekinterview.com/question_details/65811http://www.geekinterview.com/user-profile/200158http://www.geekinterview.com/user-profile/200158http://www.geekinterview.com/question_details/65811/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/65684http://www.geekinterview.com/question_details/68087http://www.geekinterview.com/user-profile/231635http://www.geekinterview.com/question_details/68087/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/67508http://www.geekinterview.com/question_details/67508http://www.geekinterview.com/user-profile/223532http://www.geekinterview.com/question_details/67508/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/65811http://www.geekinterview.com/question_details/65811http://www.geekinterview.com/user-profile/200158http://www.geekinterview.com/question_details/65811/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/65684

8/14/2019 Interview TCE

11/19

nature of foundation provided for 10+ more storey buildings, basement

construction and protection of basement structure, drainage and sewage

system to be provided in the high rise rand also water supply

View Question | Asked by : khare_sandip

Answer Question Subscribe

High raised building construction

soil density test, bearing capacity of soil?

View Question | Asked by : khare_sandip

Answer Question Subscribe

Location on a site

How is the location of a structure on a site determined?

Latest Answer: The location of the structure depends on the geographical factors

such as soil, topography, and vegitation affects. Sencory factors, climate

factors, and codes and regulations also play a big roll in positioning the

structure. ...

Read Answers (1) | Asked by :montystudent

Answer Question Subscribe

What is the design mix of M5

what is the design mix of M5

Latest Answer: Design mix for M5 is 1:5:10 (1-cement, 5-sand, 10-Coarse

aggregates) ...

Read Answers (5) | Asked by :vpupadhyay

Answer Question Subscribe

Lift Operating Machanism

What is the scheduling mechanism used in lift opeartion

http://www.geekinterview.com/question_details/65684http://www.geekinterview.com/user-profile/198618http://www.geekinterview.com/question_details/65684/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/65683http://www.geekinterview.com/question_details/65683http://www.geekinterview.com/user-profile/198618http://www.geekinterview.com/question_details/65683/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/65062http://www.geekinterview.com/question_details/65062http://www.geekinterview.com/user-profile/190647http://www.geekinterview.com/user-profile/190647http://www.geekinterview.com/question_details/65062/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/64523http://www.geekinterview.com/question_details/64523http://www.geekinterview.com/user-profile/184712http://www.geekinterview.com/user-profile/184712http://www.geekinterview.com/question_details/64523/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/63027http://www.geekinterview.com/question_details/65684http://www.geekinterview.com/user-profile/198618http://www.geekinterview.com/question_details/65684/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/65683http://www.geekinterview.com/question_details/65683http://www.geekinterview.com/user-profile/198618http://www.geekinterview.com/question_details/65683/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/65062http://www.geekinterview.com/question_details/65062http://www.geekinterview.com/user-profile/190647http://www.geekinterview.com/question_details/65062/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/64523http://www.geekinterview.com/question_details/64523http://www.geekinterview.com/user-profile/184712http://www.geekinterview.com/question_details/64523/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/63027

8/14/2019 Interview TCE

12/19

View Question | Asked by : sway2208

Answer Question Subscribe

Trilateration

What is Trilateration?How is it done in the field?What is the advantage of

trilateration?

Latest Answer: Trilateration is a method of determining the relative positions of

objects using the geometry of triangles in a similar fashion as

triangulation.ApplicationTrilateration can be used in lightning strike location

detection. Detectors operating on a common ...

Read Answers (1) | Asked by :ku_pratapAnswer Question Subscribe

R E on paving

What do the initials R E scribed on paving denote

View Question | Asked by : hsiguy

Answer Question Subscribe

Blended Cement

What is Blended Cement?

Latest Answer: The use of blended cements in concrete reduces mixing water and

bleeding, improves finishability and workability, enhances sulfate resistance,

inhibits the alkali-aggregate reaction, and lessens heat evolution during

hydration, thus moderating the chances ...

Read Answers (1) | Asked by :vipin117

Answer Question Subscribe

What is the minimum length of the wall after which expansion joint is to be provided?

Latest Answer: Minimum length of concrete wall for providing the expansion joint

is 30 meter as per British Standard. ...

http://www.geekinterview.com/question_details/63027http://www.geekinterview.com/user-profile/168989http://www.geekinterview.com/question_details/63027/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/62567http://www.geekinterview.com/question_details/62567http://www.geekinterview.com/user-profile/158560http://www.geekinterview.com/user-profile/158560http://www.geekinterview.com/question_details/62567/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/62422http://www.geekinterview.com/question_details/62422http://www.geekinterview.com/user-profile/162352http://www.geekinterview.com/question_details/62422/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/62119http://www.geekinterview.com/question_details/62119http://www.geekinterview.com/user-profile/157053http://www.geekinterview.com/user-profile/157053http://www.geekinterview.com/question_details/62119/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/59886http://www.geekinterview.com/question_details/63027http://www.geekinterview.com/user-profile/168989http://www.geekinterview.com/question_details/63027/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/62567http://www.geekinterview.com/question_details/62567http://www.geekinterview.com/user-profile/158560http://www.geekinterview.com/question_details/62567/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/62422http://www.geekinterview.com/question_details/62422http://www.geekinterview.com/user-profile/162352http://www.geekinterview.com/question_details/62422/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/62119http://www.geekinterview.com/question_details/62119http://www.geekinterview.com/user-profile/157053http://www.geekinterview.com/question_details/62119/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/59886

8/14/2019 Interview TCE

13/19

Read Answers (5) | Asked by : vishal ranjan verma

Answer Question Subscribe

What are the differences between pc-dmis and camio studio. can someone also tell me which is

recommended?

What are the differences between pc-dmis and camio studio. can someone also

tell me which is recommended?

We are looking into camio and we need to see if it is worth the investment.

Read Answers (1) | Asked by :cmwatson78

Answer Question Subscribe

What is the quickest method to find slope and deflection of beam?

Latest Answer: ILD is the best option this. ...

Read Answers (3) | Asked by : shegraf

Answer Question Subscribe

What is quick method to find slope and deflection for a beam?

Latest Answer: moment area method ...Read Answers (1) | Asked by : lokesh

Answer Question Subscribe

What is shear wall?

Latest Answer: Shear walls withstand the lateral and direct loads of a building

such as live, dead and earthquake loads. It acts like columns of a building. The

walls of staircases, elevators used to be shear walls in order to minimize thecolumns. ...

Read Answers (2) | Asked by : lokesh

Answer Question Subscribe

http://www.geekinterview.com/question_details/59886http://www.geekinterview.com/question_details/59886/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/59852http://www.geekinterview.com/question_details/59852http://www.geekinterview.com/question_details/59852http://www.geekinterview.com/user-profile/140289http://www.geekinterview.com/user-profile/140289http://www.geekinterview.com/question_details/59852/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/54054http://www.geekinterview.com/question_details/54054http://www.geekinterview.com/question_details/54054/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/53654http://www.geekinterview.com/question_details/53654http://www.geekinterview.com/question_details/53654/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/53650http://www.geekinterview.com/question_details/53650http://www.geekinterview.com/question_details/53650/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/59886http://www.geekinterview.com/question_details/59886/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/59852http://www.geekinterview.com/question_details/59852http://www.geekinterview.com/question_details/59852http://www.geekinterview.com/user-profile/140289http://www.geekinterview.com/question_details/59852/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/54054http://www.geekinterview.com/question_details/54054http://www.geekinterview.com/question_details/54054/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/53654http://www.geekinterview.com/question_details/53654http://www.geekinterview.com/question_details/53654/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/53650http://www.geekinterview.com/question_details/53650http://www.geekinterview.com/question_details/53650/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/

8/14/2019 Interview TCE

14/19

What is the soil bearing capacity?

Latest Answer: the bearing capacity of the soil is the ultimate resistance of the

soil to overburden pressure. ...

Read Answers (4) | Asked by : sudip maharana

Answer Question Subscribe

What are the duties and responsibilities of a site engineer at the oil refinery rehabilitation?

Latest Answer: first to check the site plan.and mention the site area then check

the soil bearing capacity.chek the site earth level.and prepare the level

chart.approved from consultant and take site order.start the earth work as

drawing.check total dimention and design. ...Read Answers (1) | Asked by : Ricardo Valencia Jr

Answer Question Subscribe

What is the minimum distance allowed between a building and a parking lot area ? Does the

size of

What is the minimum distance allowed between a building and a parking lot

area ? Does the size of the structure or lot size need to be taken into account?

View Question | Asked by : Paul Hand

Answer Question Subscribe

What is the differance between Load and Force?

Latest Answer: Load = mass x gravtational acceleration i.e gForce = m x athat

means Load is dependent on gravitational acceleration but force

is dependent on acceleration of the body. ...

Read Answers (2) | Asked by :prabhakar

Answer Question Subscribe

Define Orientation of building?

http://www.geekinterview.com/question_details/50886http://www.geekinterview.com/question_details/50886http://www.geekinterview.com/question_details/50886/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/50147http://www.geekinterview.com/question_details/50147http://www.geekinterview.com/question_details/50147/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/49162http://www.geekinterview.com/question_details/49162http://www.geekinterview.com/question_details/49162http://www.geekinterview.com/question_details/49162/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/48088http://www.geekinterview.com/question_details/48088http://www.geekinterview.com/question_details/48088/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/46754http://www.geekinterview.com/question_details/50886http://www.geekinterview.com/question_details/50886http://www.geekinterview.com/question_details/50886/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/50147http://www.geekinterview.com/question_details/50147http://www.geekinterview.com/question_details/50147/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/49162http://www.geekinterview.com/question_details/49162http://www.geekinterview.com/question_details/49162http://www.geekinterview.com/question_details/49162/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/48088http://www.geekinterview.com/question_details/48088http://www.geekinterview.com/question_details/48088/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/46754

8/14/2019 Interview TCE

15/19

Latest Answer: Orientation of building means to plan the building such a way that

maximum advantages of nature can be obtained like breeze, sun light etc. ...

Read Answers (2) | Asked by :jeyaseelan

Answer Question Subscribe

State the different types of foundation and different types of piles

Latest Answer: basically 2 types shallow and deep foundation.shallow:-

footing,mat or raft footing,combined footingdeep:-piles,well foundation.types

of pile:-depending on material used timber,steel(h,pipe,sheet),concrete(2

types precast, cast in situ),composite(concrete+timber,concrete+steel) ...

Read Answers (1) | Asked by :N.tamilvannanAnswer Question Subscribe

What is the differance between wind and earthquake spectrum?

View Question | Asked by :

Answer Question Subscribe

How to increase bearing capacity of soil?

Latest Answer: To improve the bearing capacity of soil, one of the

following methods can be used.1. Vibro Floatation Technique2. Repalce the

existing soil with road base materials and compact in layers to attain the

required bearing capacity of soil.3. Replace ...

Read Answers (6) | Asked by : Tamirisa Apparao

Answer Question Subscribe

What is the best book for building construction?

Latest Answer: book written by T .B CUNNA. ...

Read Answers (1) | Asked by : sudheer

Answer Question Subscribe

http://www.geekinterview.com/question_details/46754http://www.geekinterview.com/question_details/46754/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/42336http://www.geekinterview.com/question_details/42336http://www.geekinterview.com/question_details/42336/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/40976http://www.geekinterview.com/question_details/40976http://www.geekinterview.com/question_details/40976/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/40619http://www.geekinterview.com/question_details/40619http://www.geekinterview.com/question_details/40619/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/39723http://www.geekinterview.com/question_details/39723http://www.geekinterview.com/question_details/39723/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/46754http://www.geekinterview.com/question_details/46754/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/42336http://www.geekinterview.com/question_details/42336http://www.geekinterview.com/question_details/42336/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/40976http://www.geekinterview.com/question_details/40976http://www.geekinterview.com/question_details/40976/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/40619http://www.geekinterview.com/question_details/40619http://www.geekinterview.com/question_details/40619/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/39723http://www.geekinterview.com/question_details/39723http://www.geekinterview.com/question_details/39723/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/

8/14/2019 Interview TCE

16/19

What is mean by super structure?what are all the new civil construction materials?what is the

new concepts

What is mean by super structure?what are all the new civil construction

materials?what is the new concepts using in civil work?what is new trend

building structure?what is the next generation building construction and

structures,building materials?

Read Answers (5) | Asked by : sundar

Answer Question Subscribe

What is the best design for building bridges?

Latest Answer: Concrete Pre Casted Bridges are best for building bridges. ...Read Answers (2) | Asked by : Jimmy Albertson

Answer Question Subscribe

Power grids in two adjacent states(A&B) are interconnected. Can power grid in state A can be

represented

Power grids in two adjacent states(A&B) are interconnected. Can power grid in

state A can be represented by Thevenin Equivalent Circuit. If not WhyView Question | Asked by :justinkkurian

Answer Question Subscribe

What is the definition of Quality Reporting

View Question | Asked by : Edwin Fitzgerald

Answer Question Subscribe

Are you good at detailing and explain about the project you have worked on detailing.

Latest Answer: I was working in L & T Chiyoda, India. I was working on Canadian

Project of B.A.energy Industrial company. I was doing equipment foundation,

http://www.geekinterview.com/question_details/38913http://www.geekinterview.com/question_details/38913http://www.geekinterview.com/question_details/38913http://www.geekinterview.com/question_details/38913/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/38346http://www.geekinterview.com/question_details/38346http://www.geekinterview.com/question_details/38346/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/32626http://www.geekinterview.com/question_details/32626http://www.geekinterview.com/question_details/32626http://www.geekinterview.com/user-profile/54053http://www.geekinterview.com/question_details/32626/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/27051http://www.geekinterview.com/question_details/27051http://www.geekinterview.com/user-profile/36109http://www.geekinterview.com/question_details/27051/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/26657http://www.geekinterview.com/question_details/38913http://www.geekinterview.com/question_details/38913http://www.geekinterview.com/question_details/38913http://www.geekinterview.com/question_details/38913/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/38346http://www.geekinterview.com/question_details/38346http://www.geekinterview.com/question_details/38346/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/32626http://www.geekinterview.com/question_details/32626http://www.geekinterview.com/question_details/32626http://www.geekinterview.com/user-profile/54053http://www.geekinterview.com/question_details/32626/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/27051http://www.geekinterview.com/question_details/27051http://www.geekinterview.com/user-profile/36109http://www.geekinterview.com/question_details/27051/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/26657

8/14/2019 Interview TCE

17/19

equipment supporting structures, pump foundation, pipe rack, pipe stanchion,

operating stages, civil pipe support, ...

Read Answers (3) | Asked by :CivilGuru

Answer Question Subscribe

Do you have Structural design experience?

View Question | Asked by : CivilGuru

Answer Question Subscribe

Project management and planning experience ?

View Question | Asked by : CivilGuru

Answer Question Subscribe

Demonstrated work experience with Interior Design and/or Architectural Firms?

View Question | Asked by : CivilGuru

Answer Question Subscribe

Did you handle any interior designing jobs?

View Question | Asked by : CivilGuru

Answer Question Subscribe

Are you comfortable with formal design concepts in the home furnishings area?

View Question | Asked by : CivilGuru

Answer Question Subscribe

Knowledge of CAD software and the versions you have used?

Latest Answer: I have used CAD - 2004 with 2D/3D. It is very easy in new coming

versions. In 2007 version there are much new commands included. ...

Read Answers (1) | Asked by :CivilGuru

Answer Question Subscribe

http://www.geekinterview.com/question_details/26657http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/question_details/26657/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/26656http://www.geekinterview.com/question_details/26656http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/question_details/26656/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/26655http://www.geekinterview.com/question_details/26655http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/question_details/26655/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/26654http://www.geekinterview.com/question_details/26654http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/question_details/26654/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/26653http://www.geekinterview.com/question_details/26653http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/question_details/26653/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/26652http://www.geekinterview.com/question_details/26652http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/question_details/26652/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/26651http://www.geekinterview.com/question_details/26651http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/question_details/26651/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/26657http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/question_details/26657/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/26656http://www.geekinterview.com/question_details/26656http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/question_details/26656/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/26655http://www.geekinterview.com/question_details/26655http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/question_details/26655/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/26654http://www.geekinterview.com/question_details/26654http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/question_details/26654/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/26653http://www.geekinterview.com/question_details/26653http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/question_details/26653/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/26652http://www.geekinterview.com/question_details/26652http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/question_details/26652/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/26651http://www.geekinterview.com/question_details/26651http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/question_details/26651/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/

8/14/2019 Interview TCE

18/19

How did you reach your thesis design concept?

Latest Answer: yes ...

Read Answers (1) | Asked by :CivilGuru

Answer Question Subscribe

What was your synopsis for thesis topic?

View Question | Asked by : CivilGuru

Answer Question Subscribe

What is coping?

Latest Answer: Copings are linings made in projections or sunshades to not to

allow water creep inside building. ...

Read Answers (1) | Asked by :CivilGuru

Answer Question Subscribe

What is softsoil? what kind of foundation?

Latest Answer: The soil whose bearing capacity is low, this type of soil is know as

soft soil, followings are the types of foundations which is used for construction

on soft soil. 1. Pile foundations 2. Raft foundations 3. Under reemed pile

foundation (specialy ...

Read Answers (3) | Asked by :CivilGuru

Answer Question Subscribe

What is pile foundation?

Latest Answer: Pile foundation is one type of deep foundation. It is used where

soil having low bearing capacity respect to load coming on structure or the the

stresses developed due to Eq cannot be accommodated by shallow foundation

due to size restriction.Major ...

Read Answers (5) | Asked by :CivilGuru

Answer Question Subscribe

http://www.geekinterview.com/question_details/26650http://www.geekinterview.com/question_details/26650http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/question_details/26650/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/26649http://www.geekinterview.com/question_details/26649http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/question_details/26649/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/26648http://www.geekinterview.com/question_details/26648http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/question_details/26648/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/26647http://www.geekinterview.com/question_details/26647http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/question_details/26647/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/26646http://www.geekinterview.com/question_details/26646http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/question_details/26646/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/26650http://www.geekinterview.com/question_details/26650http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/question_details/26650/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/26649http://www.geekinterview.com/question_details/26649http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/question_details/26649/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/26648http://www.geekinterview.com/question_details/26648http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/question_details/26648/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/26647http://www.geekinterview.com/question_details/26647http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/question_details/26647/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/26646http://www.geekinterview.com/question_details/26646http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/question_details/26646/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/

8/14/2019 Interview TCE

19/19

Which one is comfortable for you to handle small or large scale projects?

Latest Answer: Large scale projects because we can learn to manage and handle

various activities in stipulated timeframe thus enhancing our managerial skills.

...

Read Answers (3) | Asked by :CivilGuru

Answer Question Subscribe

What is stagging?

Latest Answer: Stagging is temperary working platform for shuttering and masonry

work. ...

Read Answers (1) | Asked by :CivilGuru

Answer Question Subscribe

What is composite massonary and how is bonding done for it?

Latest Answer: The masonry which is constructed with two more combination of

materials, like stone facing and brick backing, stone facing and concrete

backing etc.Bonding of masonry is same as ordinary masonry using cement

mortar, lime mortar etc. ...

Read Answers (2) | Asked by :CivilGuru

Answer Question Subscribe

http://www.geekinterview.com/question_details/26645http://www.geekinterview.com/question_details/26645http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/question_details/26645/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/26644http://www.geekinterview.com/question_details/26644http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/question_details/26644/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/26643http://www.geekinterview.com/question_details/26643http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/question_details/26643/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/26645http://www.geekinterview.com/question_details/26645http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/question_details/26645/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/26644http://www.geekinterview.com/question_details/26644http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/question_details/26644/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/http://www.geekinterview.com/question_details/26643http://www.geekinterview.com/question_details/26643http://www.geekinterview.com/user-profile/34736http://www.geekinterview.com/question_details/26643/replyhttp://www.geekinterview.com/login.html?ref=http://www.geekinterview.com/