Date post: | 04-Jun-2018 |
Category: |
Documents |
Upload: | akshay-agarwal |
View: | 218 times |
Download: | 0 times |
of 14
8/13/2019 Introduction Chapter 7
1/14
RESULTS AND DISCUSSIONS
Department of Information Technology, College of Technology, Pantnagar 45
The main motive of the project is to make an Integrated tool in which we can use all the
software simultaneously like Format, Protection , Detection , Information , Explore , Delete..
7.1 Initial Project Undertaken
Implementing this project was the major task to be accomplished by this project . Firstly
we developed the code using c sharp and .NetFramework using Visual Studio.The Graphical
User Interface(GUI) displayed on Visual Studio provides the options of Direct dropping of
buttons and label .
C# is a language in its own right. Although it is designed to generate code that targets the .NET
environment, it is not itself part of .NET. There are some features that are supported by .NET but
not by C#, and you might be surprised to learn that there are actually features of the C# language
that are not supported by .NET (for example operator overloading)!
However, since the C# language is intended for use with .NET, it is important for us to have an
understanding of this Framework if we wish to develop applications in C# effectively.
Chapter 7
8/13/2019 Introduction Chapter 7
2/14
Results and Discussions
Department of Information Technology, College of Technology, Pantnagar46
Figure 7.1 User Interface
The main motive of the project is to make an Integrated tool in which we can use all the
software simultaneously such as :.
7.1.1 Detection
This is the very first feature by whom the user will interact.
It will let the user know that the removable mass-storage device is correctly placed on the USBport and is being ready to be used by the user.
8/13/2019 Introduction Chapter 7
3/14
Results and Discussions
Department of Information Technology, College of Technology, Pantnagar47
It may be possible that there would be more than 1 device in that case, user can select the desired
drive by the use of the combo box
This feature also adds the capability of knowing the free and used space in the pictorial form at it
so that it becomes convenient and efficient to use.
7.1.2 Information
Information is the second feature present before the user in the USB Utility Tool. In the
Information feature , the end user will come to know the different things about the USB mass-storage device.
There is a unique serial number for every device so by this feature the user will come to know its
unique feature.
Figure 7.2:Detection
8/13/2019 Introduction Chapter 7
4/14
Results and Discussions
Department of Information Technology, College of Technology, Pantnagar48
Other than this, the manufacture name, product name, the drive letter which is used to represent
the device, capacity (in GB), no of cylinders and other information will be then known to the
user.
7.1.3 Protection
User clicks on the protection button and will get the Access modes. The first mode is
FullAccess ( Read & Write). In this mode , the user will have the access to write the data or
modify the data in the USB mass-storage device.
The second mode is Read Only. Here the user can only read the data in the USB mass-storage
device. The user will not have the permission to write the data or modify it in the USB mass
storage device.
Figure 7.3 : Information
8/13/2019 Introduction Chapter 7
5/14
Results and Discussions
Department of Information Technology, College of Technology, Pantnagar49
To enable the above mentioned Access modes , the user will be given password
protection.Through password button, the user will have the following options:
1. To create a new password.2. To disable the current password of the user so that the user can change the
password.
When the user will select any of the Access Modes available and click the Apply button ,then it
will ask the user to enter the password to make changes.
Once the user enters the correct password , USB Utility Tool will ask the user to In order to
enable new setting please reconnect your USB storage devices or restart your computer .
Through Explore feature , the user can see the changes .
Figure :7.4 Set Password
8/13/2019 Introduction Chapter 7
6/14
Results and Discussions
Department of Information Technology, College of Technology, Pantnagar50
8/13/2019 Introduction Chapter 7
7/14
Results and Discussions
Department of Information Technology, College of Technology, Pantnagar51
8/13/2019 Introduction Chapter 7
8/14
Results and Discussions
Department of Information Technology, College of Technology, Pantnagar52
8/13/2019 Introduction Chapter 7
9/14
Results and Discussions
Department of Information Technology, College of Technology, Pantnagar53
Figure 7.5: Protection
8/13/2019 Introduction Chapter 7
10/14
Results and Discussions
Department of Information Technology, College of Technology, Pantnagar54
7.1.4 Format
In this feature when the user will click on Format button , then the user will get the option to
format the USB mass- storage device. As soon as the format is done the user can see whether the
USB mass-storage device has been formatted or not through explore button.
8/13/2019 Introduction Chapter 7
11/14
Results and Discussions
Department of Information Technology, College of Technology, Pantnagar55
8/13/2019 Introduction Chapter 7
12/14
Results and Discussions
Department of Information Technology, College of Technology, Pantnagar56
Figure 7.6 : Format
8/13/2019 Introduction Chapter 7
13/14
Results and Discussions
Department of Information Technology, College of Technology, Pantnagar57
7.1.5 Delete
In this feature , the user can select the folder and the files which the user wants to delete from the
USB mass-storage device.
Figure 7.7 : Delete
8/13/2019 Introduction Chapter 7
14/14
Results and Discussions
Department of Information Technology, College of Technology, Pantnagar58
7.1.6 Explore
In this feature , the user can explore the changes made in the USB mass-storage device by the
USB Utility Tool features such as Format , Delete , Protection.
Figure 7.8 : Explore