Irwin clamps

IRWIN University Specialist Program

IRWIN

CLAMPS•IRWIN G CLAMPS. QUICK-GRIP BAR CLAMPS

•QUICK-RELEASE G CLAMP.

•PRO SPEED CLAMPS.

•SASH BARS.

•T – BARS.

•CORNER CLAMPS.

•FLOOR BOARD CLAMPS.


IRWIN C

CLAMPS119 MEDIUM DUTY.

120 GENERAL PURPOSE.

121 HEAVY DUTY.

QUICK-RELEASE C CLAMP.


119 MEDIUM DUTY

DROP FORGED STEEL FRAME

TWIN START ACME COLD ROLLED THREAD

ADJUSTABLE

STEEL SWIVEL SHOE

FUSED DROP HANDLE

CLAMP SIZES•2” FRAME PROOF LOADED 875lb

•3” FRAME PROOF LOADED 1100lb



SLIM SECTIONED FRAME GIVES AN ADVANTAGE IN CONFINED SPACES


120 GENERAL

PURPOSETWIN START ACME COLD ROLLED THREAD

ADJUSTABLE STEEL SWIVEL SHOE

CLAMP SIZES•3” FRAME PROOF LOADED 1000lb






I BRACED FRAME CAST FROM SG IRON

RECOMMENDED FOR GENERAL PURPOSE WORK

FUSED HANDLEfused steelhandle will bendbefore the clamp can be overstressed.


121 HEAVY DUTY CLAMP SIZES•3” FRAME PROOF LOADED 6000lb







ADJUSTABLE STEEL SWIVEL SHOE

RECOMMENDED FOR HEAVY DUTY METAL AND FABRICATION WORK

DROPPED FORGED STEEL FOR STRENGTH AND DURABILITY



QUICK-RELEASE C-CLAMP

APPLICATIONDesigned for heavy duty woodworkingand medium duty metal working.

SAVES YOU TIMEThe spring supported moving jaw is up to 75% faster than traditional C-Clamps.Due to the moveable jaw the lengthof the thread is reduced to theminimum.

CLAMPING STRENGTHThe quick-release mechanism of the moveable jaw does notcompromise the clamping strength unlike competitor products.

CLAMPING DEPTH75mm clamping depth. 6”-9”100mm clamping depth 12"

CAPACITYThe Quick-Release Clampis available in 3 sizes with150, 225 and 300 mmclamping capacity.


QUICK-RELEASE C-CLAMP

FUSED HANDLEFused steelhandle will bendbefore the clamp can be overstressed.

ACME THREADTwin start Acme cold rolledthread for faster operation.

INVESTMENT CASTING PROCESSFrame and jaw are investmentcast steel for higher strength.

SWIVEL SHOESwivel shoe helps clampingon uneven surfaces.

CLAMP SIZES•6” FRAME PROOF LOADED 17000N

•9” FRAME PROOF LOADED 17000N

•12” FRAME PROOF LOADED 17000N


IRWIN PRO CLAMPS

•PROFESSIONAL SPEED CLAMP SMALL 3”/80mm

DEPTH.

•PROFESSIONAL SPEED CLAMP MEDIUM 4.5” /

120mm DEPTH.

•PROFESSIONAL SPEED CLAMP LARGE 5.5 / 140mm

DEPTH.


PRO CLAMPS 3” THROAT

DEPTHADJUSTABLE STEEL SWIVEL SHOE

CAST STEEL SLIDE AND HEAD

ZINC PLATED STEEL SLIDE BAR TO RESIST BENDING

SLIDE SAFETY STOP

TWIST GRIP HANDLE FOR A QUICK AND EASY OPERATION


PRO CLAMPS 4.5” THROAT

DEPTHADJUSTABLE STEEL SWIVEL SHOE

CAST STEEL SLIDE AND HEAD ZINC PLATED SERRATED STEEL SLIDE BAR TO RESIST BENDING

SLIDE SAFETY STOP

TWIST GRIP HANDLE FOR A QUICK AND EASY OPERATION

LARGER THROAT DEPTH 4.5"FOR INCREASED CLAMPING CAPACITY


PRO CLAMPS 5.5” THROAT

DEPTHAdjustable steel swivel shoe with plastic protector

Cast steel slide and head

Slide safety stop

Zinc plated serrated steel slide bar to resist bending



BRIGHT DRAWN STEEL BARS ROLLED STRAIGHT AND DRILLED WITH LOCATING HOLES FOR THE SOLID STEEL, SLIDE SECURING PINS.

STEEL HANDLE & MAINSCREW WITH A FAST ACTION ROLLED TWIN START ACME THREAD FOR STRENGTH & WEAR RESISTANCE

FIXED HEAD IS FITTED SQUARE TO THE BAR WITH A 1.5 TO 2 DEGREE TAPERFOR A TRUE PARALLEL CLAMPING ACTION

135 HEAVY DUTY SASH BARS

SASH BAR SIZES.•24”

•30”

•36”

•42”

•48”

•54”

•66”

•36” LENGTHENING BAR


136 HEAVY DUTY T -

BARS BRIGHT DRAWN STEEL BARS ROLLED STRAIGHT AND DRILLED WITH LOCATING HOLES FORTHE SOLID STEEL, SLIDE SECURING PINS.

FIXED HEAD IS FITTED SQUARE TO THE BAR WITH A 1.5 TO 2 DEGREE TAPER FOR A TRUE PARALLEL CLAMPING ACTION

SIMILAR TO THE 135 BUT FEATURING A VERY RIGID ‘T’ SECTION STEEL BAR, THE 136 WILL RESIST TWISTING AND DISTORTION UNDER CLAMPING PRESSURES WHICH CAN BE AS HIGH AS 1.9 TONS.

BOTH THE HEAD AND SLIDE ARE GUARANTEED UNBREAKABLE. THE FIXED HEAD FEATURES DRILLED FEET FOR BENCH MOUNTING. THIS IS THE STRONGEST TYPE OF BAR CLAMP THAT YOU CAN BUY.

STEEL HANDLE & MAINSCREW WITH A FAST ACTION ROLLED TWIN START ACME THREAD FOR STRENGTH & WEAR RESISTANCE


CLAMP HEADSCLAMP HEADS ARE AN ECONOMICALALTERNATIVE TO THE FULL SIZE BAR CLAMPS.

THE HEAD AND SLIDE WITH STEELMAINSCREW CAN BE FITTED TO A WOODENBATTEN 25 MM (1”) THICK BY 38 MM(1 ½”) WIDE, AND OF ANY DESIREDLENGTH.

THE TIMBER IS THEN DRILLED WITH TWO11.1MM (6/16”) DIAMETER HOLESPRODUCING A LIGHT DUTY BAR CLAMPAS STRONG AND TRUE AS THE TIMBERYOU CHOOSE.


IRWIN SPECIALIST

CLAMPS•PROFESSIONAL CORNER CLAMPS.

•PROFESSIONAL FLOORING CLAMPS.


M140 / M141 CORNER

CLAMPS ADJUSTABLE PLASTIC SWIVEL SHOE

M140 2”/ 50mm CAPACITY. / M141 4” / 100mm


SOLID GREY IRON CONSTRUCTION MACHINED ON CLAMPING SURFACES


MFC 153 FLOORING

CLAMP MFC 153 FLOORING CLAMP.•DESIGNED FOR CLOSING FLOOR BOARDS TOGETHER BEFORE NAILING.

•BODY MADE FROM CAST IRON SHOE AND CAMS MADE FROM SG (DUCTILE IRON).•BEVEL GEARS ARE TOTALLY ENCLOSED FOR PROTECTION FROM DIRT OR DAMAGE.

SPRING LOADED CAMS FOR A QUICK RELEASE (SG)

STRONG LOCATION SHOE FOR APPLYING EVEN FORCE TO FLOOR BOARDS

WILL FIT ONTO TIMBER JOISTS 1.1/2” – 3”- 38 – 90mm


•Quick-grip bar Clamp Spreader.•Handi – Clamps.


•Quick-grip Spring Clamps


• Micro Bar Clamps• Mini Bar Clamps• Quick Change Bar Clamps• Handi Clamps• Spring Clamps

CLAMPING PROGRAM



• MICRO– 1 Size 114mm– Throat Depth

• 30mm– Clamping Pressure

– 70 pounds of pressure– 2 Tools in 1

• Converts to a Handy Spreader



• MINI– 1 size

• 150mm– Throat Depth

• 62mm– Clamping Pressure

• 150 to 200 pounds of pressure– 25% smaller than Standard Clamp

Format• Ideal for small Projects – Hobby/Craft work• Ideal for working in small spaces

– 2 Tools in 1• Converts to a Spreader



QUICK CHANGE BAR CLAMPS6 Sizes

• 150mm 150mm and 300mm• 300mm are the most popular sizes• 450mm• 600mm• 910mm• 1250mm

– Throat Depth• 82.5mm

– Clamping Pressure• Up to 250 pounds pressure



High Tech Resin BodyGlass reinforced nylonDurable and LightweightTemperature Resistance

Metal BarHeat Treated HRC 50 - 55Maximum Strength, resists bending

Soft PadsRemovable/InterchangeableThermoplastic RubberSoft and pliable

Features & Benefits Bar Clamps



• Design Specifications– Ergonomic curvature– Balance– Comfort

• Quick-Release Trigger– Two Fold Operation– One finger on trigger slides bar into place– Quick release trigger

• Pistol Grip– One handed operation– Quick Tightening

Features & Benefits Bar Clamps



Controllable variable

force

Wider Opening

Non-marking Swivel Pads

Strongest Brand in Clamps

Quick Release Trigger

Infinite Adjustable

Locking

Durable Glass Filled Nylon Construction

Easy one hand use

Handi Clamp

Available in 3 sizes 38, 50 and 100 mmclamping capacity.



QUICK-GRIP SPRING CLAMPS

HIGH TECH RESINMade from lightweighthigh tech resin. This isa glass fibre reinforcednylon known for itstremendous strength.

JAWSJaws designed to holdodd shaped objects.

CONTOURED HANDLESContoured handles for the mostcomfortable grip.

SIZESAvailable in 3 sizes with25, 50 and 75 mmclamping capacity.

SOFT PADSSoft, pliable pads protectfine work surfaces.


Date post:	19-Jan-2015
Category:	Technology
Upload:	sharon-samuel
View:	119 times
Download:	2 times

Irwin clamps

Technology