Standards published
New International Standards published between 01 September and 30 September 2015
* Available in English only
** French version of standard previously published in English only
Price group
PC 248 Sustainability criteria for bioenergy
ISO 13065:2015
* Sustainability criteria for bioenergy G
TC 4 Rolling bearings
ISO 104:2015 * Rolling bearings — Thrust bearings — Boundary dimensions, general plan D
TC 8 Ships and marine technology
ISO 6218:2015
Inland navigation vessels — Manually- and power-operated coupling devices for pushing units and coupled vessels — Safety requirements and main dimensions
C
ISO 6042:2015 * Ships and marine technology — Weathertight single-leaf steel doors B
ISO 17939:2015
* Ships and marine technology — Oil tank hatches C
ISO 17940:2015
* Ships and marine technology — Hinged watertight doors B
TC 17 Steel
ISO 16574:2015
* Determination of percentage of resolvable pearlite in high carbon steel wire rod A
ISO 4990:2015 * Steel castings — General technical delivery requirements C
ISO 4993:2015 * Steel and iron castings — Radiographic testing C
ISO 9477:2015 * High strength cast steels for general engineering and structural purposes A
ISO 11972:2015
* Corrosion-resistant cast steels for general applications B
ISO 11973:2015
* Heat-resistant cast steels and alloys for general applications A
ISO 13583-1:2015
* Centrifugally cast steel and alloy products — Part 1: General testing and tolerances B
ISO 13583-2:2015
* Centrifugally cast steel and alloy products — Part 2: Heat-resistant materials B
ISO 19960:2015
* Cast steels and alloys with special physical properties B
TC 20 Aircraft and space vehicles
ISO 19631:2015
* Aerospace series — Tube fittings for fluid systems, 5 080 psi (35 000 kPa) — Qualification specification
D
ISO 16679:2015
* Space systems — Relative motion analysis elements after LV/SC separation B
ISO/TR 19473:2015
* Space systems — Best practices for orbit elements at payload — LV separation B
TC 22 Road vehicles
ISO 8820-3:2015
* Road vehicles — Fuse-links — Part 3: Fuse-links with tabs (blade type) Type C (medium), Type E (high current) and Type F (miniature)
C
ISO 6469-4:2015
* Electrically propelled road vehicles — Safety specifications — Part 4: Post crash electrical safety
C
TC 23 Tractors and machinery for agriculture and forestry
ISO 5131:2015 * Tractors for agriculture and forestry — Measurement of noise at the operator's position — Survey method
C
ISO 7216:2015 * Agricultural and forestry tractors — Measurement of noise emitted when in motion A
ISO 16230-1:2015
Agricultural machinery and tractors — Safety of higher voltage electrical and electronic components and systems — Part 1: General requirements
C
ISO 16231-2:2015
Self-propelled agricultural machinery — Assessment of stability — Part 2: Determination of static stability and test procedures
D
ISO 11783-10:2015
Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 10: Task controller and management information system data inter-change
H
TC 27 Solid mineral fuels
ISO 5074:2015 * Hard coal — Determination of Hardgrove grindability index A
TC 28 Petroleum products and related products of synthetic or biological origin
ISO 20844:2015
Petroleum and related products — Determination of the shear stability of polymer-containing oils using a diesel injector nozzle
B
TC 31 Tyres, rims and valves
ISO 4000-1:2015
Passenger car tyres and rims — Part 1: Tyres (metric series)
G
ISO 23671:2015
Passenger car tyres — Method for measuring relative wet grip performance — Loaded new tyres
C
ISO 10231:2003/Amd 1:2015
Motorcycle tyres — Test methods for verifying tyre capabilities — Amendment 1
XZ
TC 34 Food products
ISO 10519:2015
Rapeseed — Determination of chlorophyll content — Spectrometric method
A
ISO 21415-2:2015
Wheat and wheat flour — Gluten content — Part 2: Determination of wet gluten and gluten index by mechanical means
C
ISO 7218:2007/Amd 1:2013
* Microbiology of food and animal feeding stuffs — General requirements and guidance for microbiological examinations — Amendment 1
G
ISO 18743:2015
Microbiology of the food chain — Detection of Trichinella larvae in meat by artificial diges-tion method
C
ISO/TS 18867:2015
Microbiology of the food chain — Polymerase chain reaction (PCR) for the detection of food-borne pathogens — Detection of pathogenic Yersinia enterocolitica and Yersinia pseudotuberculosis
E
ISO 17780:2015
Animal and vegetable fats and oils — Determination of aliphatic hydrocarbons in vegetable oils
E
TC 38 Textiles
ISO 18782:2015
* Textiles — Determination of dynamic hygroscopic heat generation C
ISO 17608:2015
Textiles — Bare elastane yarns — Determination of resistance to chlorinated water (swim-ming-pool water)
B
TC 41 Pulleys and belts (including veebelts)
ISO 9563:2015
Belt drives — Electrical conductivity of antistatic endless synchronous belts — Characteris-tics and test method
A
ISO 19347:2015
* Synchronous belt drives — Imperial pitch trapezoidal profile system — Belts and pulleys D
TC 43 Acoustics
ISO 362-1:2015
Measurement of noise emitted by accelerating road vehicles — Engineering method — Part 1: M and N categories
G
TC 44 Welding and allied processes
ISO 14172:2015
Welding consumables — Covered electrodes for manual metal arc welding of nickel and nickel alloys — Classification
D
ISO 17643:2015
Non-destructive testing of welds — Eddy current testing of welds by complex-plane analysis
C
TC 45 Rubber and rubber products
ISO 5772:2015 * Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems — Specification
D
ISO 8308:2015
Rubber and plastics hoses and tubing — Determination of transmission of liquids through hose and tubing walls
B
ISO 289-1:2015
Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 1: De-termination of Mooney viscosity
C
ISO 19050:2015
* Rubber, raw, vulcanised — Determination of metal content by ICP-OES B
ISO 1126:2015
Rubber compounding ingredients — Carbon black — Determination of loss on heating B
ISO 8312:2015 * Rubber compounding ingredients — Stearic acid — Definition and test methods D
ISO 19043:2015
* Natural rubber latex concentrate — Determination of total phosphate content by spectropho-tometric method
A
ISO 20299-1:2015
Film for wrapping rubber bales — Part 1: Butadiene rubber (BR) and styrene-butadiene rubber (SBR)
A
ISO 7229:2015
Rubber- or plastics-coated fabrics — Measurement of gas permeability C
TC 58 Gas cylinders
ISO 14456:2015
* Gas cylinders — Gas properties and associated classification (FTSC) codes C
ISO 16964:2015
* Gas cylinders — Flexible hoses assemblies — Specification and testing C
ISO 11118:2015
Gas cylinders — Non-refillable metallic gas cylinders — Specification and test methods
E
TC 61 Plastics
ISO 16012:2015
Plastics — Determination of linear dimensions of test specimens
B
ISO 6721-10:2015
* Plastics — Determination of dynamic mechanical properties — Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
D
ISO 18263-1:2015
* Plastics — Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging — Part 1: Designation system and basis for specification
A
ISO 10364:2015
* Structural adhesives — Determination of the pot life (working life) of multi-component adhe-sives
B
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO 12490:2011
Petroleum and natural gas industries — Mechanical integrity and sizing of actuators and mounting kits for pipeline valves
G
ISO 19901-8:2014
Petroleum and natural gas industries — Specific requirements for offshore structures — Part 8: Marine soil investigations
H
TC 72 Textile machinery and accessories
ISO 18599:2015
* Textile machinery and accessories — Strips for water jet solidification A
TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use
ISO 8362-2:2015
Injection containers and accessories — Part 2: Closures for injection vials
A
TC 83 Sports and other recreational facilities and equipment
ISO 9838:2015
Alpine and touring ski-bindings — Test soles for ski-binding tests B
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO 12749-3:2015
* Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 3: Nuclear fuel cycle
F
ISO/TS 18090-1:2015
Radiological protection — Characteristics of reference pulsed radiation — Part 1: Photon radiation
C
TC 87 Cork
ISO 2031:2015
Granulated cork — Determination of apparent bulk density A
ISO 4708:2015
Composition cork — Gasket material — Test methods B
TC 92 Fire safety
ISO 16733-1:2015
* Fire safety engineering — Selection of design fire scenarios and design fires — Part 1: Selection of design fire scenarios
E
TC 94 Personal safety -- Protective clothing and equipment
ISO 12312-1:2013/Amd 1:2015
Eye and face protection — Sunglasses and related eyewear — Part 1: Sunglasses for gen-eral use — Amendment 1
XZ
ISO * High visibility clothing — Test methods and requirements
20471:2013 D
ISO 16900-7:2015
* Respiratory protective devices — Methods of test and test equipment — Part 7: Practical performance test methods
B
TC 100 Chains and chain sprockets for power transmission and conveyors
ISO 4347:2015 * Leaf chains, clevises and sheaves — Dimensions, measuring forces, tensile strengths and dynamic strengths
D
ISO 15654:2015
* Fatigue test method for transmission precision roller chains and leaf chains F
TC 106 Dentistry
ISO 17937:2015
Dentistry — Osteotome
B
ISO 10650:2015
Dentistry — Powered polymerization activators
C
ISO 19429:2015
* Dentistry — Designation system for dental implants A
TC 107 Metallic and other inorganic coatings
ISO 2746:2015
Vitreous and porcelain enamels — High voltage test A
TC 108 Mechanical vibration, shock and condition monitoring
ISO 13373-3:2015
* Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 3: Guidelines for vibration diagnosis
F
ISO 13381-1:2015
* Condition monitoring and diagnostics of machines — Prognostics — Part 1: General guidelines
TC 110 Industrial trucks
ISO 22915-24:2015
Industrial trucks — Verification of stability — Part 24: Slewing variable-reach rough-terrain trucks
C
TC 114 Horology
ISO/TS 18684:2015
Timekeeping instruments — Watch external parts made of hard materials — General re-quirements and test methods
B
TC 117 Fans
ISO 13350:2015
Fans — Performance testing of jet fans
E
TC 121 Anaesthetic and respiratory equipment
ISO 80601-2-72:2015
Medical electrical equipment — Part 2-72: Particular requirements for basic safety and es-sential performance of home healthcare environment ventilators for ventilator-dependent patients
H
TC 123 Plain bearings
ISO 19259:2015
* Plain bearings — Bearings with embedded solid lubricants B
TC 130 Graphic technology
ISO/TR 19300:2015
* Graphic technology — Guidelines for the use of standards for print media production C
TC 131 Fluid power systems
ISO 19973-2:2015
* Pneumatic fluid power — Assessment of component reliability by testing — Part 2: Direc-tional control valves
C
ISO 19973-3:2015
* Pneumatic fluid power — Assessment of component reliability by testing — Part 3: Cylin-ders with piston rod
D
ISO 19973-5:2015
* Pneumatic fluid power — Assessment of component reliability by testing — Part 5: Non-return valves, shuttle valves, dual pressure valves (AND function), one-way adjustable flow control valves, quick-exhaust valves
C
ISO 4393:2015 * Fluid power systems and components — Cylinders — Basic series of piston strokes A
ISO 6432:2015
Pneumatic fluid power — Single rod cylinders, 1 000 kPa (10 bar) series, bores from 8 mm to 25 mm — Basic and mounting dimensions
A
ISO 10767-1:2015
* Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 1: Method for determining source flow ripple and source impedance of pumps
E
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 15494:2015
Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) — Metric series for specifications for components and the system
H
ISO 17885:2015
Plastics piping systems — Mechanical fittings for pressure piping systems — Specifications
F
ISO 18489:2015
* Polyethylene (PE) materials for piping systems — Determination of resistance to slow crack growth under cyclic loading — Cracked Round Bar test method
B
TC 146 Air quality
ISO 16258-1:2015
Workplace air — Analysis of respirable crystalline silica by X-ray diffraction — Part 1: Direct-on-filter method
D
ISO 16258-2:2015
Workplace air — Analysis of respirable crystalline silica by X-ray diffraction — Part 2: Meth-od by indirect analysis
E
ISO 17621:2015
Workplace atmospheres — Short term detector tube measurement systems — Require-ments and test methods
D
TC 147 Water quality
ISO 18191:2015
* Water quality — Determination of pHt in sea water — Method using the indicator dye m-cresol purple
B
ISO 17244:2015
Water quality — Determination of the toxicity of water samples on the embryo-larval devel-opment of Japanese oyster (Crassostrea gigas) and mussel (Mytilus edulis or Mytilus gallo-provincialis)
D
TC 149 Cycles
ISO 4210-1:2014
Cycles — Safety requirements for bicycles — Part 1: Terms and definitions
A
ISO 4210-2:2014
Cycles — Safety requirements for bicycles — Part 2: Requirements for city and trekking, young adult, mountain and racing bicycles
E
ISO 4210-3:2014
Cycles — Safety requirements for bicycles — Part 3: Common test methods
B
ISO 4210-4:2014
Cycles — Safety requirements for bicycles — Part 4: Braking test methods
E
ISO 4210-5:2014
Cycles — Safety requirements for bicycles — Part 5: Steering test methods
C
ISO 4210-6:2014
Cycles — Safety requirements for bicycles — Part 6: Frame and fork test methods
D
ISO 4210-7:2014
Cycles — Safety requirements for bicycles — Part 7: Wheels and rims test methods
B
ISO 4210-8:2014
Cycles — Safety requirements for bicycles — Part 8: Pedal and drive system test methods
B
ISO 4210-9:2014
Cycles — Safety requirements for bicycles — Part 9: Saddles and seat-post test methods
A
TC 150 Implants for surgery
ISO 13356:2015
Implants for surgery — Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP)
C
ISO 5840-1:2015
Cardiovascular implants — Cardiac valve prostheses — Part 1: General requirements
G
ISO 5840-2:2015
Cardiovascular implants — Cardiac valve prostheses — Part 2: Surgically implanted heart valve substitutes
G
ISO 12417-1:2015
Cardiovascular implants and extracorporeal systems — Vascular device-drug combination products — Part 1: General requirements
F
TC 156 Corrosion of metals and alloys
ISO 16540:2015
Corrosion of metals and alloys — Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method
C
TC 159 Ergonomics
ISO 7250-3:2015
Basic human body measurements for technological design — Part 3: Worldwide and re-gional design ranges for use in product standards
E
TC 164 Mechanical testing of metals
ISO 6892-4:2015
* Metallic materials — Tensile testing — Part 4: Method of test in liquid helium C
ISO 18338:2015
* Metallic materials — Torsion test at ambient temperature C
ISO 16859-1:2015
Metallic materials — Leeb hardness test — Part 1: Test method
D
ISO 16859-2:2015
Metallic materials — Leeb hardness test — Part 2: Verification and calibration of the testing devices
B
ISO 16859-3:2015
Metallic materials — Leeb hardness test — Part 3: Calibration of reference test blocks
C
ISO 14556:2015
Metallic materials — Charpy V-notch pendulum impact test — Instrumented test method
D
TC 172 Optics and photonics
ISO 12853:2015
* Microscopes — Information provided to the user A
ISO 19055:2015
* Microscopes — Minimum requirements for binocular tubes A
ISO 19056-1:2015
* Microscopes — Definition and measurement of illumination properties — Part 1: Image brightness and uniformity in bright field microscopy
A
TC 173 Assistive products for persons with disability
ISO 10865-2:2015
* Wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers — Part 2: Systems for forward-facing wheelchair-seated passengers
E
ISO 16840-6:2015
Wheelchair seating — Part 6: Simulated use and determination of the changes in properties of seat cushions
E
ISO/TR 16840-9:2015
Wheelchair seating — Part 9: Clinical interface pressure mapping guidelines for seating
C
TC 176 Quality management and quality assurance
ISO 9000:2015
Quality management systems — Fundamentals and vocabulary G
ISO 9001:2015
Quality management systems — Requirements E
TC 183 Copper, lead, zinc and nickel ores and concentrates
ISO 9599:2015 * Copper, lead, zinc and nickel sulfide concentrates — Determination of hygroscopic moisture content of the analysis sample — Gravimetric method
A
ISO * Zinc sulfide concentrates — Determination of silver content — Acid dissolution and flame
15247:2015 atomic absorption spectrometric method C
TC 188 Small craft
ISO 19009:2015
Small craft — Electric navigation lights — Performance of LED lights
C
TC 189 Ceramic tile
ISO 10545-14:2015
Ceramic tiles — Part 14: Determination of resistance to stains
B
TC 199 Safety of machinery
ISO 13850:2015
Safety of machinery — Emergency stop function — Principles for design
B
TC 204 Intelligent transport systems
ISO 14813-1:2015
* Intelligent transport systems — Reference model architecture(s) for the ITS sector — Part 1: ITS service domains, service groups and services
H
ISO/TS 14907-1:2015
* Electronic fee collection — Test procedures for user and fixed equipment — Part 1: Descrip-tion of test procedures
H
ISO 17515-1:2015
* Intelligent transport systems — Communications access for land mobiles (CALM) — Evolved Universal Terrestrial Radio Access Network (E-UTRAN) — Part 1: General usage
B
ISO/TS 19299:2015
Electronic fee collection — Security framework
H
TC 206 Fine ceramics
ISO 17859:2015
* Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement method of piezoelectric strain at high electric field
B
TC 207 Environmental management
ISO 14001:2015
Environmental management systems — Requirements with guidance for use
E
TC 211 Geographic information/Geomatics
ISO 19135-1:2015
Geographic information — Procedures for item registration — Part 1: Fundamentals
G
TC 213 Dimensional and geometrical product specifications and verification
ISO 286-2:2010/Cor 1:2013
* Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts — Technical Corrigendum 1
free
ISO 16610-40:2015
Geometrical product specifications (GPS) — Filtration — Part 40: Morphological profile filters: Basic concepts
C
TC 215 Health informatics
ISO/TS 13972:2015
* Health informatics — Detailed clinical models, characteristics and processes G
ISO 14199:2015
* Health informatics — Information models — Biomedical Research Integrated Domain Group (BRIDG) Model
B
ISO/TS 17975:2015
* Health informatics — Principles and data requirements for consent in the Collection, Use or Disclosure of personal health information
E
ISO 21549-5:2015
* Health informatics — Patient healthcard data — Part 5: Identification data B
TC 219 Floor coverings
ISO 12951:2015
Textile floor coverings — Determination of mass loss, fibre bind and stair nosing appear-ance change using the Lisson Tretrad machine
B
ISO 16905:2015
* Resilient floor coverings — Specification for rubber floor covering — Tile/Plank B
TC 220 Cryogenic vessels
ISO 21029-2:2015
Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 2: Operational requirements
C
TC 228 Tourism and related services
ISO 13810:2015
Tourism services — Industrial tourism — Service provision
C
TC 229 Nanotechnologies
ISO/TS 80004-2:2015
Nanotechnologies — Vocabulary — Part 2: Nano-objects
B
TC 234 Fisheries and aquaculture
ISO 16741:2015
Traceability of crustacean products — Specifications on the information to be recorded in farmed crustacean distribution chains
E
ISO 18539:2015
Traceability of molluscan products — Specifications on the information to be recorded in captured molluscan distribution chains
D
TC 238 Solid biofuels
ISO 18134-2:2015
* Solid biofuels — Determination of moisture content — Oven dry method — Part 2: Total moisture — Simplified method
A
ISO 18134-3:2015
Solid biofuels — Determination of moisture content — Oven dry method — Part 3: Moisture in general analysis sample
A
TC 263 Coalbed methane (CBM)
ISO 18871:2015
* Method of determining coalbed methane content E
TC 292 Security and resilience
ISO * Management system for private security operations — Requirements with guidance for use
18788:2015 H
ISO/TS 22317:2015
* Societal security — Business continuity management systems — Guidelines for business impact analysis (BIA)
E
ISO/TS 22318:2015
* Societal security — Business continuity management systems — Guidelines for supply chain continuity
D
ISO/TR 22351:2015
* Societal security — Emergency management — Message structure for exchange of infor-mation
H
IULTCS International Union of Leather Technologists and Chemists Societies
ISO 5402-2:2015
* Leather — Determination of flex resistance — Part 2: Vamp flex method A
ISO 18219:2015
Leather — Determination of chlorinated hydrocarbons in leather — Chromatographic meth-od for short-chain chlorinated paraffins (SCCP)
A
JTC 1 Information technology
ISO/IEC TR 19759:2015
* Software Engineering — Guide to the software engineering body of knowledge (SWEBOK) H
ISO/IEC 19987:2015
* Information technology — EPC Information services — Specification H
ISO/IEC 19988:2015
* Information technology — GS1 Core Business Vocabulary (CBV) G
ISO/IEC 20243:2015
* Information Technology — Open Trusted Technology ProviderTM Standard (O-TTPS) — Mitigating maliciously tainted and counterfeit products
E
ISO/IEC 9594-6:2014/Cor 1:2015
* Information technology — Open Systems Interconnection — The Directory — Part 6: Se-lected attribute types — Technical Corrigendum 1
free
ISO/IEC 9594-8:2014/Cor 1:2015
* Information technology — Open Systems Interconnection — The Directory — Part 8: Public-key and attribute certificate frameworks — Technical Corrigendum 1
free
ISO/IEC 19770-2:2015
* Information technology — Software asset management — Part 2: Software identification tag G
ISO/IEC TS 30103:2015
* Software and Systems Engineering — Lifecycle Processes — Framework for Product Quali-ty Achievement
F
ISO/IEC 17960:2015
* Information technology — Programming languages, their environments and system soft-ware interfaces — Code signing for source code
B
ISO/IEC TS 19568:2015
* Programming Languages — C++ Extensions for Library Fundamentals H
ISO/IEC TS 19841:2015
* Technical Specification for C++ Extensions for Transactional Memory E
ISO/IEC * Information technology — Computer graphics, image processing and environmental data
19775-2:2015 representation — Extensible 3D (X3D) — Part 2: Scene access interface (SAI) A
ISO/IEC 14543-4-3:2015
* Information technology — Home Electronic Systems (HES) architecture — Part 4-3: Appli-cation layer interface to lower communications layers for network enhanced control devices of HES Class 1
E
ISO/IEC 14763-2:2012/Amd 1:2015
* Information technology — Implementation and operation of customer premises cabling — Part 2: Planning and installation — Amendment 1
XZ
ISO/IEC 14776-326:2015
* Information technology — Small Computer System Interface (SCSI) — Part 326: Reduced Block Commands (RBC)
F
ISO/IEC 14888-2:2008/Cor 1:2015
* Information technology — Security techniques — Digital signatures with appendix — Part 2: Integer factorization based mechanisms — Technical Corrigendum 1: To ISO/IEC 14888-2:2008
free
ISO/IEC 19790:2012/Cor 1:2015
* Information technology — Security techniques — Security requirements for cryptographic modules — Technical Corrigendum 1
free
ISO/IEC 24759:2014/Cor 1:2015
* Information technology — Security techniques — Test requirements for cryptographic mod-ules — Technical Corrigendum 1
free
ISO/IEC 27006:2015
* Information technology — Security techniques — Requirements for bodies providing audit and certification of information security management systems
E
ISO/IEC 17823:2015
* Information technology — Office equipment — Colour terminology for office colour equip-ment
C
ISO/IEC 23000-13:2014/Amd 1:2015
* Information technology - Multimedia application format (MPEG-A) — Part 13: Augmented reality application format — Amendment 1: ARAF reference software and conformance
XZ
ISO/IEC 23001-10:2015
* Information technology — MPEG systems technologies — Part 10: Carriage of timed metadata metrics of media in ISO base media file format
C
ISO/IEC 23008-2:2015/Amd 1:2015
* Information technology — High efficiency coding and media delivery in heterogeneous envi-ronments — Part 2: High efficiency video coding — Amendment 1: 3D video extensions
H
ISO/IEC 15438:2015
* Information technology — Automatic identification and data capture techniques — PDF417 bar code symbology specification
H
ISO/IEC 24769-61:2015
* Information Technology — Real Time Locating System (RTLS) Device Conformance Test Methods — Part 61: Low rate pulse repetition frequency Ultra Wide Band (UWB) air inter-face
A
ISO/IEC 24769-62:2015
* Information Technology — Real Time Locating System (RTLS) Device Conformance Test Methods — Part 62: High rate pulse repetition frequency Ultra Wide Band (UWB) air inter-face
A
ISO/IEC 24770-61:2015
* Information technology — Real Time Locating System (RTLS) device performance test methods — Part 61: Low rate pulse repetition frequency Ultra Wide Band (UWB) air inter-face
B
ISO/IEC 9075-2:2011/Cor 2:2015
* Information technology — Database languages — SQL — Part 2: Foundation (SQL/Foundation) — Technical Corrigendum 2
free
ISO/IEC 9075- * Information technology — Database languages — SQL — Part 4: Persistent Stored Mod-
4:2011/Cor 2:2015
ules (SQL/PSM) — Technical Corrigendum 2 free
ISO/IEC 9075-14:2011/Cor 2:2015
* Information technology — Database languages — SQL — Part 14: XML-Related Specifica-tions (SQL/XML) — Technical Corrigendum 2
free
ISO/IEC 15944-2:2015
* Information technology — Business Operational View — Part 2: Registration of scenarios and their components as business objects
H
ISO/IEC 15944-9:2015
* Information technology — Business Operational View — Part 9: Business transaction trace-ability framework for commitment exchange
H
ISO/IEC 19785-3:2015
* Information technology — Common Biometric Exchange Formats Framework — Part 3: Patron format specifications
G
ISO/IEC 19794-6:2011/Amd 1:2015
* Information technology — Biometric data interchange formats — Part 6: Iris image data — Amendment 1: Conformance testing methodology and clarification of defects
F
ISO/IEC TS 20027:2015
* Biometrics interoperability profiles — Best practices for slap tenprint captures C
Standards confirmed
The following International Standards are confimred for a five year period:
IIW International Institute of Welding
ISO/TR 22824:2003
TC 4 Rolling bearings
ISO 1224-1:2007 (reconfirmed)
ISO 1224-2:2007 (reconfirmed)
ISO 5753-1:2009
TC 6 Paper, board and pulps
ISO 692:1982 (reconfirmed)
ISO 801-1:1994 (reconfirmed)
ISO 801-2:1994 (reconfirmed)
ISO 801-3:1994 (reconfirmed)
ISO 838:1974 (reconfirmed)
ISO 3688:1999 (reconfirmed)
ISO 5267-1:1999 (reconfirmed)
ISO 5351:2010
ISO 10716:1994 (reconfirmed)
ISO 11093-9:2006 (reconfirmed)
ISO 13542:2006 (reconfirmed)
ISO 14436:2010
ISO 15318:1999 (reconfirmed)
TC 8 Ships and marine technology
ISO/R 538:1967
ISO/R 644:1967
ISO/R 784:1968
ISO 7461:1984 (reconfirmed)
ISO 9203-1:1989 (reconfirmed)
ISO 9203-2:1989 (reconfirmed)
ISO 9203-3:1989 (reconfirmed)
TC 10 Technical product documentation
ISO 128-23:1999 (reconfirmed)
ISO 3766:2003 (reconfirmed)
ISO 7437:1990 (reconfirmed)
ISO 9431:1990 (reconfirmed)
ISO 81714-1:2010
TC 20 Aircraft and space vehicles
ISO 482:1977 (reconfirmed)
ISO 1002:1983 (reconfirmed)
ISO 2020-1:1997 (reconfirmed)
ISO 2020-2:1997 (reconfirmed)
ISO 2671:1982 (reconfirmed)
ISO 2685:1998 (reconfirmed)
ISO 7938:1986 (reconfirmed)
ISO 8078:1984 (reconfirmed)
ISO 8079:1984 (reconfirmed)
ISO 8399-1:1998 (reconfirmed)
ISO 8399-2:1998 (reconfirmed)
ISO 8591-1:1989 (reconfirmed)
ISO 9216:2002 (reconfirmed)
ISO 9217:2002 (reconfirmed)
ISO 9218:2002 (reconfirmed)
ISO 9219:2002 (reconfirmed)
ISO 9662:1994 (reconfirmed)
ISO 9763:1999 (reconfirmed)
ISO 10792-1:1995 (reconfirmed)
ISO 10792-2:1995 (reconfirmed)
ISO 10792-3:1995 (reconfirmed)
ISO 10955:1999 (reconfirmed)
ISO 13411:1997 (reconfirmed)
ISO 13412:1997 (reconfirmed)
ISO 13413:1997 (reconfirmed)
ISO 13415:1997 (reconfirmed)
ISO 13416:1997 (reconfirmed)
ISO 13417:1997 (reconfirmed)
ISO 21849:2006 (reconfirmed)
ISO 1949:1987
ISO 8668-2:1986 (reconfirmed)
ISO 11639:2010
TC 22 Road vehicles
ISO 3412:1992 (reconfirmed)
ISO 3553-1:1987 (reconfirmed)
ISO 4024:1992 (reconfirmed)
ISO 6518-1:2002 (reconfirmed)
ISO 6856:2005 (reconfirmed)
ISO 11565:2006 (reconfirmed)
ISO 19813:2006 (reconfirmed)
ISO 2699:1994 (reconfirmed)
ISO 9103:1987 (reconfirmed)
TC 23 Tractors and machinery for agriculture and forestry
ISO 10975:2009
ISO 11684:1995 (reconfirmed)
ISO 17591:2002 (reconfirmed)
ISO 7918:1995 (reconfirmed)
TC 28 Petroleum products and related products of synthetic or biological origin
ISO 15167:1999 (reconfirmed)
TC 29 Small tools
ISO 839-1:2006 (reconfirmed)
ISO 2236:1991 (reconfirmed)
ISO 2351-1:2007 (reconfirmed)
TC 30 Measurement of fluid flow in closed conduits
ISO 2186:2007 (reconfirmed)
TC 33 Refractories
ISO 8894-1:2010
ISO 21587-1:2007 (reconfirmed)
ISO 21587-2:2007 (reconfirmed)
ISO 21587-3:2007 (reconfirmed)
TC 34 Food products
ISO 13366-2:2006 (reconfirmed)
ISO 17129:2006 (reconfirmed)
ISO 17678:2010
ISO 27205:2010
ISO 29981:2010
ISO 16657:2006 (reconfirmed)
TC 38 Textiles
ISO 1805:2006 (reconfirmed)
ISO 1833-24:2010
ISO/TS 14909:2012
ISO 105-A01:2010
ISO 105-C06:2010
ISO 105-C08:2010
ISO 105-D01:2010
ISO 105-E03:2010
ISO 105-E07:2010
ISO 105-E09:2010
ISO 105-E12:2010
ISO 105-X14:1994 (reconfirmed)
ISO 6989:1981 (reconfirmed)
ISO 23733:2007 (reconfirmed)
TC 39 Machine tools
ISO 447:1984 (reconfirmed)
ISO 2562:1973 (reconfirmed)
ISO 2912:1973 (reconfirmed)
ISO 3590:1976 (reconfirmed)
ISO 3610:1976 (reconfirmed)
ISO 6898:1984 (reconfirmed)
ISO 6899:1984 (reconfirmed)
TC 43 Acoustics
ISO 389-6:2007 (reconfirmed)
ISO 8253-1:2010
ISO 3744:2010
ISO 3746:2010
ISO 11202:2010
TC 44 Welding and allied processes
ISO/TS 15011-6:2012
TC 45 Rubber and rubber products
ISO 12965:2000 (reconfirmed)
TC 46 Information and documentation
ISO 10957:2009
ISO 9706:1994 (reconfirmed)
ISO 11108:1996 (reconfirmed)
ISO 11798:1999 (reconfirmed)
ISO 22310:2006 (reconfirmed)
TC 51 Pallets for unit load method of materials handling
ISO 18334:2010
TC 54 Essential oils
ISO 856:2006 (reconfirmed)
ISO 1271:1983 (reconfirmed)
ISO 3794:1976 (reconfirmed)
ISO 8897:2010
ISO 11020:1998 (reconfirmed)
TC 60 Gears
ISO 17485:2006 (reconfirmed)
ISO 1122-2:1999 (reconfirmed)
TC 61 Plastics
ISO 13894-1:2000 (reconfirmed)
ISO 19712-2:2007 (reconfirmed)
ISO 19712-3:2007 (reconfirmed)
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO 13628-6:2006
ISO 16070:2005 (reconfirmed)
ISO 10441:2007 (reconfirmed)
ISO 13703:2000 (reconfirmed)
ISO 13704:2007 (reconfirmed)
ISO 15544:2000 (reconfirmed)
TC 71 Concrete, reinforced concrete and pre-stressed concrete
ISO 12439:2010
ISO 22966:2009
TC 72 Textile machinery and accessories
ISO 3914-1:1994 (reconfirmed)
ISO 3914-2:1994 (reconfirmed)
ISO 3914-3:1994 (reconfirmed)
ISO 3914-7:1994 (reconfirmed)
ISO 4105:1978 (reconfirmed)
TC 77 Products in fibre reinforced cement
ISO 9125:2009
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO 8690:1988 (reconfirmed)
ISO 17874-1:2010
ISO 17874-5:2007 (reconfirmed)
ISO 9005:2007 (reconfirmed)
TC 92 Fire safety
ISO 1182:2010
ISO 9239-1:2010
TC 96 Cranes
ISO 13202:2003 (reconfirmed)
TC 105 Steel wire ropes
ISO 4345:1988 (reconfirmed)
TC 106 Dentistry
ISO 28158:2010
ISO/TS 13498:2011
TC 108 Mechanical vibration, shock and condition monitoring
ISO 18431-4:2007 (reconfirmed)
TC 110 Industrial trucks
ISO 938:1975 (reconfirmed)
ISO 1756:1975 (reconfirmed)
ISO 2331:1974 (reconfirmed)
ISO 22915-4:2009
TC 111 Round steel link chains, chain slings, components and accessories
ISO 3266:2010
TC 113 Hydrometry
ISO 15769:2010
TC 115 Pumps
ISO 14847:1999 (reconfirmed)
TC 117 Fans
ISO 12499:1999 (reconfirmed)
ISO 13347-3:2004 (reconfirmed)
ISO 13349:2010
TC 121 Anaesthetic and respiratory equipment
ISO 10651-3:1997 (reconfirmed)
TC 127 Earth-moving machinery
ISO 7464:1983 (reconfirmed)
ISO 7546:1983 (reconfirmed)
ISO 9246:1988 (reconfirmed)
ISO 7132:2003 (reconfirmed)
TC 130 Graphic technology
ISO/TS 10128:2009
TC 131 Fluid power systems
ISO 4406:1999 (reconfirmed)
ISO 27407:2010
TC 135 Non-destructive testing
ISO 7963:2006 (reconfirmed)
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 265-1:1988 (reconfirmed)
ISO 8283-1:1991 (reconfirmed)
ISO 8772:2006 (reconfirmed)
ISO 8773:2006 (reconfirmed)
ISO 13229:2010
ISO 13254:2010
ISO 13255:2010
ISO 13257:2010
ISO 13259:2010
ISO 13260:2010
ISO 13262:2010
ISO 13263:2010
ISO 13264:2010
ISO 13265:2010
ISO 13266:2010
ISO 13267:2010
ISO 13268:2010
ISO 13846:2000 (reconfirmed)
ISO 21004:2006 (reconfirmed)
ISO 10838-3:2001
TC 142 Cleaning equipment for air and other gases
ISO/TS 21220:2009
TC 150 Implants for surgery
ISO 7206-4:2010
ISO 14602:2010
ISO 18192-2:2010
TC 153 Valves
ISO 10434:2004
ISO 15761:2002
TC 156 Corrosion of metals and alloys
ISO 11130:2010
ISO 11844-3:2006 (reconfirmed)
ISO 15329:2006 (reconfirmed)
TC 163 Thermal performance and energy use in the built environment
ISO 12567-1:2010
ISO 12968:2010
ISO 29803:2010
ISO 29804:2009
ISO 29805:2009
TC 165 Timber structures
ISO 22389-1:2010
TC 171 Document management applications
ISO 6196-10:1999 (reconfirmed)
TC 172 Optics and photonics
ISO 10937:2000 (reconfirmed)
ISO 12858-3:2005 (reconfirmed)
ISO 17123-7:2005 (reconfirmed)
TC 183 Copper, lead, zinc and nickel ores and concentrates
ISO 12739:2006 (reconfirmed)
TC 184 Automation systems and integration
ISO/TS 8000-311:2012
ISO/TS 15926-3:2009
ISO/TS 22745-30:2009
ISO/TS 29002-4:2009
ISO/TS 29002-5:2009
ISO/TS 29002-10:2009
ISO/TS 29002-31:2009
TC 194 Biological and clinical evaluation of medical devices
ISO 22442-3:2007 (reconfirmed)
TC 201 Surface chemical analysis
ISO 15472:2010
TC 206 Fine ceramics
ISO 22214:2006 (reconfirmed)
ISO 22215:2006 (reconfirmed)
ISO 27448:2009
TC 216 Footwear
ISO 10765:2010
ISO 10768:2010
ISO/TS 16181:2011
ISO 20869:2010
TC 219 Floor coverings
ISO 24336:2005 (reconfirmed)
TC 226 Materials for the production of primary aluminium
ISO 1619:1976 (reconfirmed)
ISO 1620:1976 (reconfirmed)
ISO 2367:1972 (reconfirmed)
ISO 2961:1974 (reconfirmed)
ISO 3566:1976 (reconfirmed)
ISO 3699:1976 (reconfirmed)
ISO 20292:2009
TC 229 Nanotechnologies
ISO/TS 10797:2012
JTC 1 Information technology
ISO/IEC 20060:2010
ISO/IEC 24727-1:2014
ISO/IEC 13210:1999
(reconfirmed)
ISO/IEC 18009:1999
(reconfirmed)
ISO/IEC TR 24718:2005
(reconfirmed)
ISO 9660:1988 (reconfirmed)
ISO/IEC 10885:1993
(reconfirmed)
ISO/IEC 15946-5:2009
ISO/IEC TR 19791:2010
ISO/IEC 9281-1:1990
(reconfirmed)
ISO/IEC 9281-2:1990
(reconfirmed)
ISO/IEC 10918-4:1999
(reconfirmed)
ISO/IEC 11172-1:1993
(reconfirmed)
ISO/IEC 11172-2:1993
(reconfirmed)
ISO/IEC 11172-3:1993
(reconfirmed)
ISO/IEC 11544:1993
(reconfirmed)
ISO/IEC 13818-3:1998
(reconfirmed)
ISO/IEC 13818-10:1999
(reconfirmed)
ISO/IEC 14495-1:1999
(reconfirmed)
ISO/IEC 14495-2:2003
(reconfirmed)
ISO/IEC 14496-13:2004
(reconfirmed)
ISO/IEC 14496-26:2010
ISO/IEC 15444-8:2007
ISO/IEC 15938-7:2003
(reconfirmed)
ISO/IEC 16500-1:1999
(reconfirmed)
ISO/IEC 16500-2:1999
(reconfirmed)
ISO/IEC 16500-3:1999
(reconfirmed)
ISO/IEC 16500-4:1999
(reconfirmed)
ISO/IEC 16500-5:1999
(reconfirmed)
ISO/IEC 16500-6:1999
(reconfirmed)
ISO/IEC 16500-7:1999
(reconfirmed)
ISO/IEC 16500-8:1999
(reconfirmed)
ISO/IEC 16500-9:1999
(reconfirmed)
ISO/IEC 21000-14:2007
ISO/IEC 23000-4:2009
ISO/IEC 23000-11:2009
ISO/IEC 23004-4:2007
ISO/IEC 24800-3:2010
ISO/IEC 9995-1:2009
ISO/IEC 9995-2:2009
ISO/IEC 9995-3:2010
ISO/IEC 9995-4:2009
ISO/IEC 9995-5:2009
ISO/IEC 9995-7:2009
ISO/IEC 9995-8:2009
ISO/IEC TS 29140-1:2011
ISO/IEC TS 29140-
2:2011
ISO/IEC 19784-1:2006
Standards withdrawn
Period from 01 September to 30 September 2015
TC 8 Ships and marine technology
ISO/R 538:1967 (replaced by )
ISO/R 644:1967 (replaced by )
ISO/R 784:1968 (replaced by )
TC 58 Gas cylinders
ISO 13340:2001 (replaced by ISO 11118:2015)
TC 106 Dentistry
ISO 10650-1:2004 (replaced by ISO 10650:2015)
ISO 10650-2:2007 (replaced by ISO 10650:2015)
TC 121 Anaesthetic and respiratory equipment
ISO 10651-2:2004 (replaced by ISO 80601-2-72:2015)
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 14236:2000 (replaced by ISO 17885:2015)
ISO 10838-1:2000 (replaced by ISO 17885:2015)
ISO 10838-2:2000 (replaced by ISO 17885:2015)
ISO 10838-3:2001 (replaced by ISO 17885:2015)
TC 150 Implants for surgery
ISO 5840:2005 (replaced by ISO 5840-2:2015)
ISO/TS 12417:2011
(replaced by ISO 12417-1:2015)
ISO/TS 15539:2000
(replaced by )
TC 164 Mechanical testing of metals
ISO 19819:2004 (replaced by ISO 6892-4:2015)
TC 211 Geographic information/Geomatics
ISO 19135:2005 (replaced by ISO 19135-1:2015)
TC 215 Health informatics
ISO/TS 11073-92001:2007
(replaced by ISO 22077-1:2015)
IULTCS International Union of Leather Technologists and Chemists Societies
ISO 22288:2006 (replaced by ISO 5402-2:2015)