ISOupdate July 2017 - Certifico

ISO Update Supplement to ISOfocus

July 2017

ISO Update, Supplement to ISO Focus -- July 2017 1

International Standards in process

An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an Interna-tional Standard takes the form of a committee draft (CD) - this is cir-culated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.

CD registered

Period from 01 June to 30 June 2017

These documents are currently under consideration in the technical committee.

They have been registred at the Central Secretariat.

TC 2 Fasteners

ISO/CD 3506-5 Mechanical properties of corrosion-resistant stainless-steel fasteners — Part 5: Special fasteners (including fasteners from nickel al-loys) for heat resistance and high temperature applications

TC 8 Ships and marine technology

ISO/CD 11711-1

Ships and marine technology — Piping and machinery — Ballast water sampling and analysis — Part 1: Discharge sampling port

TC 20 Aircraft and space vehicles

ISO/CD 16091 Space systems — Integrated logistic support

ISO/CD TS 20991

Space systems — Requirements for small spacecraft

TC 22 Road vehicles

ISO/CD 14229-8

Road vehicles — Unified diagnostic services (UDS) — Part 8: Unified diagnostic services on Clock Extension Peripheral Interface Protocol implementation (UDSonCXPI)

ISO/CD 20078-1

Road vehicles — Extended vehicle (ExVe) 'web services' — Part 1: ExVe content

ISO/CD 20078-2

Road vehicles — Extended vehicle (ExVe) 'web services' — Part 2: ExVe access

ISO/CD 20078-3

Road vehicles — Extended vehicle (ExVe) 'web services' — Part 3: ExVe security

ISO/CD 20078-4

Road vehicles — Extended vehicle (ExVe) 'web services' — Part 4: ExVe control

ISO/CD 20080 Road vehicles — Information for remote diagnostic support — General requirements, definitions and use cases

TC 23 Tractors and machinery for agriculture and forestry

ISO/CD 16122-5

Agricultural and forestry machines — Inspec-tion of sprayers in use — Part 5: Aerial spray systems — Environmental protection

ISO 5718:2013/CD Amd 1

Harvesting equipment — Blades for agricultural rotary mowers — Requirements — Amend-ment 1

TC 29 Small tools

ISO/DTS 13399-313

Cutting tool data representation and exchange — Part 313: Creation and exchange of 3D models — Burrs

ISO/DTS 13399-314

Cutting tool data representation and exchange — Part 314: Creation and exchange of 3D models - Cartridges for indexable inserts

ISO/DTS 13399-315

Cutting tool data representation and exchange — Part 315: Creation andexchange of 3D models - Modelling of machine operated feed out tools

TC 34 Food products

ISO/CD 22579 Infant formula and adult nutritionals — De-termination of fructans — High performance anion exchange chromatographic with pulsed amperometric detection (HPAEC-PAD) after enzymatic treatment.

TC 38 Textiles

ISO/CD 20418-2

Textiles — Qualitative and quantitative prot-eomic analysis of some animal hair fibres — Part 2: Peptide detection using MALDI-TOF MS

TC 39 Machine tools

ISO/CD 10791-7

Test conditions for machining centres — Part 7: Accuracy of finished test pieces

TC 44 Welding and allied processes

ISO/CD 14174 Welding consumables — Fluxes for sub-merged arc welding and electroslag welding — Classification

ISO/CD 7289 Gas welding equipment — Quick-action cou-plings with shut-off valves for welding, cutting and allied processes

TC 46 Information and documentation

ISO/CD 21110 Emergency preparedness and response for cultural heritage

TC 58 Gas cylinders

ISO/CD 9809-1 Gas cylinders — Design, construction and testing of refillable seamless steel gas cylinders and tubes — Part 1: Quenched and tempered steel cylinders and tubes with tensile strength less than 1 100 MPa

ISO/CD 9809-2 Gas cylinders — Design, construction and testing of refillable seamless steel gas cylinders and tubes — Part 2: Quenched and tempered steel cylinders and tubes with tensile strength greater than or equal to 1 100 MPa

ISO/CD 9809-3 Gas cylinders — Design, construction and test-ing of refillableseamless steel gas cylinders and tubes — Part 3: Normalized steel cylinders and tubes

TC 61 Plastics

ISO/CD 307 Plastics — Polyamides — Determination of viscosity number

TC 67 Materials, equipment and offshore structures for petroleum, petrochemi-cal and natural gas industries

ISO/CD 20074 Petroleum and natural gas industries — Geo-logical hazards risk management of oil and gas pipelines

TC 71 Concrete, reinforced concrete and pre-stressed concrete

2 ISO Update, Supplement to ISO Focus -- July 2017

ISO/CD 20987 Simplified design guidelines for mechanical connections between precast concrete struc-tural elements in buildings

TC 92 Fire safety

ISO/CD 834-13 Fire resistance tests — Elements of building construction — Part 13: Measurement of the thermal response and assessment of ap-plied fire protection to steel beams with web openings

TC 106 Dentistry

ISO/CD 10873 Dentistry — Denture adhesives

ISO/CD 17730 Dentistry — Fluoride varnishes

TC 108 Mechanical vibration, shock and condi-tion monitoring

ISO/CD 5982 Mechanical vibration and shock — Range of idealized values to characterize seated-body biodynamic response under vertical vibration (Revision of ISO 5982:2001)

ISO/CD 15230 Mechanical vibration and shock — Coupling forces at the man--machine interface for hand-transmitted vibration

TC 113 Hydrometry

ISO/DTR 11330

Determination of volume of water and water level in lakes and reservoirs

TC 121 Anaesthetic and respiratory equipment

ISO/CD 80601-2-84

Medical electrical equipment — Part 2-84: Particular requirements for basic safety and essential performance of emergency and trans-port ventilators

TC 135 Non-destructive testing

ISO/CD 22232-1

Non-destructive testing — Characterization and verification of ultrasonic test Equipment — Part 1: Instruments

ISO/CD 22232-2

Non-destructive testing — Characterization and verification of ultrasonic test Equipment — Part 2: Probes

ISO/CD 22232-3

Non-destructive testing — Characterization and verification of ultrasonic test Equipment — Part 3: Combined equipment

TC 138 Plastics pipes, fittings and valves for the transport of fluids

ISO/CD 13257 Thermoplastics piping systems for non-pres-sure applications — Test method for resistance to elevated temperature cycling

ISO/CD 21138-1

Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 1: Material speci-fications and performance criteria for pipes, fittings and system

TC 146 Air quality

ISO/CD 20264 Stationary source emissions — Determination of the mass concentration of individual volatile organic compounds (VOCs) in waste gases from non-combustion processes

TC 150 Implants for surgery

ISO/CD 5832-9 Implants for surgery — Metallic materials — Part 9: Wrought high nitrogen stainless steel

ISO/CD 5832-12

Implants for surgery — Metallic materials — Part 12: Wrought cobalt-chromium-molybde-num alloy

ISO/CD 5832-14

Implants for surgery — Metallic materials — Part 14: Wrought titanium 15-molybdenum 5-zirconium 3-aluminium alloy

ISO/CD 14117 Active implantable medical devices — Electro-magnetic compatibility — EMC test protocols for implantable cardiac pacemakers, implant-able cardioverter defibrillators and cardiac resynchronization devices

TC 156 Corrosion of metals and alloys

ISO/CD 22479 Corrosion of metals and alloys — Sulfur dioxide test in a humid atmosphere (Fixed gas method)

TC 159 Ergonomics

ISO/CD 7933 Ergonomics of the thermal environment — Analytical determination and interpretation of heat stress using calculation of the predicted heat strain

TC 172 Optics and photonics

ISO/CD 19962 Optics and photonics — Spectroscopic meas-urement methods for radiation scattered by optical components

TC 176 Quality management and quality assurance

ISO/CD 18091 Quality management systems — Guidelines for the application of ISO 9001:2008 in local government

TC 190 Soil quality

ISO/CD 23611-3

Soil quality — Sampling of soil invertebrates — Part 3: Sampling and soil extraction of enchytraeids

ISO/CD 17616 Soil quality — Guidance on the choice and evaluation of bioassays for ecotoxicological characterization of soils and soil materials

TC 204 Intelligent transport systems

ISO/CD 19638 Intelligent transport systems — Road Boundary Departure Prevention Systems (RBDPS) — Per-formance requirements and test procedures

ISO/CD TR 21190

Electronic fee collection — Investigation of charging policies and technologies for future standardization

TC 206 Fine ceramics

ISO/CD 20501 Fine ceramics (advanced ceramics, advanced technical ceramics) — Weibull statistics for strength data

ISO/CD 21714 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for deter-mining density of ceramic coatings

TC 207 Environmental management

ISO/CD 19991 Environmental Conscious Design (ECD) — Principles, requirements and guidance

ISO/CD 14016 Environmental management — Guidelines on assurance of environmental reports

TC 209 Cleanrooms and associated controlled environments

ISO/CD 14644-16

Cleanrooms and associated controlled environ-ments — Part 16: Code of practice for improv-ing energy efficiency in cleanrooms and clean air devices

TC 211 Geographic information/Geomatics

ISO/CD 19111 Geographic information — Referencing by coordinates

ISO/CD 19131 Geographic information — Data product specifications

ISO/CD TS 19159-3

Geographic information — Calibration and validation of remote sensing imagery sensors and data — Part 3: SAR/InSAR

TC 228 Tourism and related services


ISO/CD 21416 Recreational diving services — Requirements and guidance on sustainable practices in rec-reational diving

ISO/CD 21417 Recreational diving services — Requirements for training on environmental awareness for recreational divers

TC 232 Learning services outside formal education

ISO/CD 29992 Assessment of educational results outside the formal Sector — Requirements with guidance

TC 260 Human resource management

ISO/CD 30414 Guidelines — Human Capital Reporting for Internal and External Stakeholders

TC 269 Railway applications

ISO/DTR 22131

Railway applications — Railway braking — Country specific applications for the 20138 series

TC 282 Water reuse

ISO/CD 21939-1

Characterization of energy consumption for wastewater treatment — Part 1: Part 1 — Bio-logical processes

TC 285 Clean cookstoves and clean cooking solutions

ISO/DTR 19867-3

Clean cookstoves and clean cooking solu-tions — Harmonized laboratory test protocols — Part 3: Voluntary performance targets for cookstoves based on laboratory testing

TC 299 Robotics

ISO/DTR 20218-2

Robots and robotic devices — Safety require-ments for industrial robots — Part 2: Industrial robot system manual load stations

JTC 1 Information technology

ISO/IEC 10646/PDAM 2

Information technology — Universal Coded Character Set (UCS) — Amendment 2

ISO/IEC CD 14651

Information technology — International string ordering and comparison — Method for com-paring character strings and description of the common template tailorable ordering

ISO/IEC CD 19770-8

Information technology — IT asset manage-ment — Part 8: Part 8: Guidelines for map-ping of industry practices to/from the ISO/IEC 19770 family of standards

ISO/IEC CD 21878

Information technology — Security techniques — Security guidelines for design and imple-mentation of virtualized servers

ISO/IEC PDTR 27103

Information technology — Security techniques — Cybersecurity and ISO and IEC Standards

ISO/IEC 29192-2:2012/PDAM 1

Information technology — Security techniques — Lightweight cryptography — Part 2: Block ciphers — Amendment 1

ISO/IEC CD 29192-6

Information technology — Security techniques — Lightweight cryptography — Part 6: Mes-sage authentication codes (MACs)

ISO/IEC PDTS 22237-1

Information technology — Data centre facilities and infrastructures — Part 1: Part 1: General concepts


Information technology — Data centre facilities and infrastructures — Part 2: Part 2: Building construction


Information technology — Data centre facilities and infrastructures — Part 3: Part 3: Power distribution


Information technology — Data centre facilities and infrastructures — Part 4: Part 4: Environ-mental control


Information technology — Data centre facilities and infrastructures — Part 5: Part 5: Telecom-munications cabling infrastructure


Information technology — Data centre facilities and infrastructures — Part 6: Part 5: Security systems


Information technology — Data centre facilities and infrastructures — Part 7: Part 7: Manage-ment and operational information

DIS circulated


These documents have obtained substantial support within the ap-propriate ISO technical committee.

They have been submitted to the ISO member bodies for voting by the date shown.

* Available in English only

Vote terminates

TC 2 Fasteners

ISO/DIS 4042 * Fasteners — Electroplated coat-ing systems

(Revision of ISO 4042:1999)

TC 5 Ferrous metal pipes and metallic fittings

ISO 49:1994/DAmd 1

* Malleable cast iron fittings threaded to ISO 7-1 — Amend-ment 1: Chemical composition of the zinc coating — adjustment to actual requirements regarding hazardous substances


ISO/DIS 19847 * Ships and marine technology — Shipboard data servers to share field data at sea

2017-09-19

ISO/DIS 19848 * Ships and marine technology — Standard data for shipboard machinery and equipment

2017-09-19

TC 10 Technical product documentation

ISO/DIS 20318-1

* Mechanical pencils and leads for general use — Classification, dimensions, quality and test methods — Part 1: Mechanical pencils

2017-09-15

ISO/DIS 20318-2

* Mechanical pencils and leads for general use — Classification, dimensions, quality and test methods — Part 2: Black leads

2017-09-15


ISO/DIS 8153-2

* Aerospace fluid systems and components — Vocabulary — Part 2: Fittings and couplings

2017-08-29


TC 22 Road vehicles

ISO/DIS 16750-1

* Road vehicles — Environmental conditions and testing for electri-cal and electronic equipment — Part 1: General

2017-09-12

(Revision of ISO 16750-1:2006)

ISO/DIS 13216-3

* Road vehicles — Anchorages in vehicles and attachments to anchorages for child restraint systems — Part 3: Classifica-tion of child restraint system and space in vehicle

2017-09-12


ISO/DIS 19723-1.2

* Road vehicles — Liquefied natural gas (LNG) fuel systems — Part 1: Safety requirements

2017-08-07

ISO/DIS 19723-2.2

* Road vehicles — Liquefied natural gas (LNG) fuel systems — Part 2: Test requirements

2017-08-07

ISO/DIS 19825 * Road vehicles - Liquefied petroleum gas (LPG) refuelling connector

2017-08-29

ISO/DIS 20766-1

* Road vehicles — Liquefied pe-troleum gas (LPG) fuel systems components — Part 1: General requirements and definitions

2017-08-28

ISO/DIS 20766-2

* Road vehicles — Liquefied pe-troleum gas (LPG) fuel systems components — Part 2: Perfor-mance and general test methods

2017-08-28

ISO/DIS 20766-3

* Road vehicles — Liquefied pe-troleum gas (LPG) fuel systems components — Part 3: 80% stop valve

2017-08-28

ISO/DIS 20766-4

* Road vehicles — Liquefied petroleum gas (LPG) fuel system components — Part 4: Level indicator

2017-08-28

ISO/DIS 21266-1

* Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel systems — Part 1: Safety requirements

2017-09-07

ISO/DIS 21266-2

* Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel systems — Part 2: Test methods

2017-09-07


ISO/DIS 8759-1

* Agricultural tractors — Front-mounted equipment — Part 1: Power take-off: Safety require-ments and clearance zone around PTO

2017-09-04


ISO/DIS 8759-3

* Agricultural tractors — Front-mounted equipment — Part 3: Power take-off: General specifi-cations and location

2017-09-04


ISO/DIS 8759-4

* Agricultural tractors — Front-mounted equipment — Part 4: Three-point linkage

2017-09-04


ISO/DIS 7714 * Agricultural irrigation equipment — Volumetric valves — General requirements and test methods

2017-08-30


ISO/DIS 9644 * Agricultural irrigation equipment — Pressure losses in irrigation valves — Test method

2017-09-20


TC 25 Cast irons and pig irons

ISO/DIS 185 * Grey cast irons — Classification and specification

2017-09-19


ISO/DIS 1083 * Spheroidal graphite cast irons — Classification

2017-09-20


TC 28 Petroleum and related products, fuels and lu-bricants from natural or synthetic sources

ISO/DIS 3924 * Petroleum products — Determi-nation of boiling range distribu-tion — Gas chromatography method

2017-09-01


ISO/DIS 4264 * Petroleum products — Cal-culation of cetane index of middle-distillate fuels by the four variable equation

2017-09-14

(Revision of ISO 4264:2007/Amd 1:2013)

TC 31 Tyres, rims and valves

ISO/DIS 28580 * Tyre rolling resistance measure-ment method — Single point test and measurement result cor-relation — Designed to facilitate international cooperation and, possibly, regulation building

2017-09-01


TC 37 Terminology and other language and content resources

ISO/DIS 24623-1

* Language resource management — Corpus query lingua franca (CQLF) — Part 1: Metamodel

2017-08-25

TC 38 Textiles

ISO/DIS 21232 * Textiles — Determination of moisturizing effect of textile materials by measurement of microclimate between textiles and simulated human skin using sweating guarded hotplate

2017-09-14

ISO/DIS 3175-4

* Textiles — Professional care, drycleaning and wetcleaning of fabrics and garments — Part 4: Procedure for testing perfor-mance when cleaning and finish-ing using simulated wetcleaning

2017-08-30

(Revision of ISO 3175-4:2003, ISO 3175-4:2003/Cor 1:2009)


ISO/DIS 18275.2

Welding consumables — Cov-ered electrodes for manual metal arc welding of high-strength steels — Classification

2017-08-22



ISO/DIS 24373.2

Welding consumables — Solid wires and rods for fusion welding of copper and copper alloys — Classification

2017-08-23


TC 45 Rubber and rubber products

ISO/DIS 247-1.2

* Rubber — Determination of ash — Part 1: Combustion method

2017-08-15


ISO/DIS 3858 * Rubber compounding ingredi-ents — Carbon black — Deter-mination of light transmittance of toluene extract

2017-08-30


ISO/DIS 5435 * Rubber compounding ingredi-ents — Carbon black — Deter-mination of tinting strength

2017-09-14


ISO/DIS 7781 * Styrene-butadiene rubber, raw — Determination of soap and organic-acid content

2017-08-30


ISO/DIS 8332 * Rubber compounding ingredi-ents — Sulfur — Methods of test

2017-09-14


ISO/DIS 8067 * Flexible cellular polymeric ma-terials — Determination of tear strength

2017-09-07


ISO/DIS 8307 * Flexible cellular polymeric materials — Determination of resilience by ball rebound

2017-09-12


TC 59 Buildings and civil engi-neering works

ISO/DIS 16739-1

Industry Foundation Classes (IFC) for data sharing in the con-struction and facility manage-ment industries — Part 1: Data schema using EXPRESS schema definitions

2017-09-21


ISO/DIS 21931-2

* Sustainability in buildings and civil engineering works — Framework for methods of assessment of the sustainability performance of construction works — Part 2: Civil engineering works

2017-09-21

TC 61 Plastics

ISO/DIS 21301-1

* Plastics — Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials — Part 1: Designa-tion system and basis for specifications

2017-09-12


ISO/DIS 21301-2

* Plastics — Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials — Part 2: Preparation of test specimens and determi-nation of properties

2017-09-12

(Revision of ISO 4613-2:1995, ISO 4613-2:1995/Amd 1:2004)

ISO/DIS 21304-1

* Plastics — Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials — Part 1: Designation system and basis for specifications

2017-09-12


ISO/DIS 29988-1

* Plastics — Polyoxymethylene (POM) moulding and extrusion materials — Part 1: Designa-tion system and basis for specifications

2017-09-12


ISO/DIS 29988-2

* Plastics — Polyoxymethylene (POM) moulding and extrusion materials — Part 2: Preparation of test specimens and determi-nation of properties

2017-09-12


ISO/DIS 11567 * Carbon fibre — Determination of filament diameter and cross-sectional area

2017-09-05


ISO 30012:2016/DAmd 1

* Carbon-fibre-reinforced plastics — Determination of the size and aspect ratio of crushed objects — Amendment 1

2017-09-04

TC 71 Concrete, reinforced concrete and pre-stressed concrete

ISO/DIS 13315-8

* Environmental management for concrete and concrete structures — Part 8: Environmental labels and declarations

2017-09-04

TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceuti-cal use

ISO 8871-3:2003/DAmd 1

* Elastomeric parts for parenterals and for devices for pharmaceuti-cal use — Part 3: Determination of released-particle count — Amendment 1

2017-09-06

TC 83 Sports and other rec-reational facilities and equipment

ISO 23537-1:2016/DAmd 1

* Requirements for sleeping bags — Part 1: Thermal and dimen-sional requirements — Amend-ment 1

2017-09-14

TC 84 Devices for administration of medicinal products and catheters

ISO/DIS 20695 * Enteral feeding systems - Design and testing

2017-09-21

TC 89 Wood-based panels

ISO/DIS 2426-4

* Plywood — Classification by surface appearance — Part 4: Palm-plywood

2017-08-28

TC 92 Fire safety

ISO/DIS 1716 * Reaction to fire tests for products — Determination of the gross heat of combustion (calorific value)

2017-09-07



ISO/DIS 23932-1

* Fire safety engineering — Gen-eral principles — Part 1: General

2017-08-30


TC 94 Personal safety -- Pro-tective clothing and equipment

ISO/DIS 22568-1

* Foot and leg protectors — Re-quirements and test methods for footwear components assess-ment — Part 1: Metallic toecaps

2017-09-01

ISO/DIS 22568-2

* Foot and leg protectors — Re-quirements and test methods for footwear component assess-ment — Part 2: Non-metallic toecaps

2017-09-01

ISO/DIS 22568-3

* Foot and leg protectors — Requirements and test meth-ods for footwear components assessment — Part 3: Metallic anti-perforation insert

2017-09-01

ISO/DIS 22568-4

* Foot and leg protectors — Re-quirements and test methods for footwear components assess-ment — Part 4: Non-metallic perforation resistant insert

2017-09-01

ISO/DIS 18639-4

* PPE ensembles for firefighters undertaking specialist rescue activities — Part 4: Gloves

2017-09-20

TC 105 Steel wire ropes

ISO/DIS 19427 * Steel wire ropes — Pre-fabri-cated parallel wire strands for suspension bridge main cable — Specifications

2017-09-19

TC 107 Metallic and other inorgan-ic coatings

ISO/DIS 6158 * Metallic and other inorganic coatings — Electrodeposited coatings of chromium for engi-neering purposes

2017-08-30


TC 114 Horology

ISO/DIS 6425 * Horology — Divers' watches

2017-08-25



ISO/DIS 80601-2-79

* Medical electrical equip-ment — Part 2-79: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory impairment

2017-08-28

ISO/DIS 80601-2-80

* Medical electrical equip-ment — Part 2-80: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory insufficiency

2017-08-28

TC 127 Earth-moving machinery

ISO 7132:2003/DAmd 1

* Earth-moving machinery — Dumpers — Terminology and commercial specifications — Amendment 1

2017-08-30

TC 131 Fluid power systems

ISO/DIS 6099 * Fluid power systems and components — Cylinders — Identification code for mounting dimensions and mounting types

2017-09-15


ISO/DIS 8139 * Pneumatic fluid power — Cylin-ders, 1 000 kPa (10 bar) series — Mounting dimensions of rod-end spherical eyes

2017-08-30


ISO/DIS 8140 * Pneumatic fluid power — Cylin-ders, 1 000 kPa (10 bar) series — Mounting dimensions of rod-end clevises

2017-08-30


ISO/DIS 20145 * Pneumatic fluid power — Test methods for measuring acoustic emission pressure levels of exhaust silencers

2017-09-11

ISO/DIS 21018-4

* Hydraulic fluid power — Moni-toring the level of particulate contamination in the fluid — Part 4: Use of the light extinction technique

2017-09-07



ISO/DIS 8779 * Plastics piping systems — Poly-ethylene (PE) pipes for irrigation — Specifications

2017-09-07

(Revision of ISO 8779:2010, ISO 8779:2010/Amd 1:2014)

ISO 15874-2:2013/DAmd 1

* Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes — Amendment 1

2017-09-07

ISO 15874-3:2013/DAmd 1

* Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings — Amendment 1

2017-09-07

ISO 15874-5:2013/DAmd 1

* Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 5: Fit-ness for purpose of the system — Amendment 1

2017-09-07

ISO/DIS 7432.2

Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the de-sign of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals

2017-08-16


TC 146 Air quality

ISO/DIS 20435-1

* Workplace Atmospheres — Part 1: Gas detectors — Performance requirements of detectors for toxic gases

2017-08-30

TC 147 Water quality

ISO/DIS 19040-1

* Water quality — Determination of the estrogenic potential of water and waste water — Part 1: Yeast estrogen screen (Saccharomy-ces cerevisiae)

2017-08-30

TC 159 Ergonomics

ISO/DIS 27501 * The human-centred organization — Guidance for managers


ISO/DIS 9241-306

* Ergonomics of human-system interaction — Part 306: Field as-sessment methods for electronic visual displays

2017-09-01


TC 161 Controls and protective devices for gas and/or oil

ISO/DIS 23551-4

Safety and control devices for gas burners and gas-burning appliances — Particular require-ments — Part 4: Valve-proving systems for automatic shut-off valves

2017-07-06


TC 163 Thermal performance and energy use in the built environment

ISO/DIS 20310 * Thermal insulation for building equipment and industrial instal-lations — Aluminosilicate wool products — Specification

2017-09-05


ISO/DIS 10110-18

* Optics and photonics — Prepa-ration of drawings for optical elements and systems — Part 18: Material imperfections — Stress birefringence, bubbles and inclusions, and homogeneity and striae

2017-08-25

(Revision of ISO 10110-2:1996, ISO 10110-3:1996, ISO 10110-4:1997)

ISO/DIS 17123-9

* Optics and optical instruments — Field procedures for testing geodetic and surveying instru-ments — Part 9: Terrestrial laser scanners

2017-08-31

ISO/DIS 13694 Optics and photonics — La-sers and laser-related equip-ment — Test methods for laser beam power (energy) density distribution

2017-09-21


TC 176 Quality management and quality assurance

ISO/DIS 10001 * Quality management — Cus-tomer satisfaction — Guide-lines for codes of conduct for organizations

2017-08-25


ISO/DIS 10002 * Quality management — Cus-tomer satisfaction — Guide-lines for complaints handling in organizations

2017-08-25


ISO/DIS 10003 * Quality management — Cus-tomer satisfaction — Guidelines for dispute resolution external to organizations

2017-08-25


ISO/DIS 10004 * Quality management — Custom-er satisfaction — Guidelines for monitoring and measuring

2017-08-25


TC 181 Safety of toys

ISO/DIS 8124-6

* Safety of toys — Part 6: Certain phthalate esters in toys and children's products

2017-09-14


TC 184 Automation systems and integration

ISO/DIS 15926-13

* Industrial automation systems and integration — Integration of life-cycle data for process plants including oil and gas production facilities — Part 13: Integrated asset planning life-cycle

2017-09-04

TC 190 Soil quality

ISO/DIS 18400-205

* Soil quality — Sampling — Part 205: Guidance on the procedure for investigation of natural, near-natural and cultivated sites

2017-09-05


TC 197 Hydrogen technologies

ISO/DIS 16111 * Transportable gas storage de-vices — Hydrogen absorbed in reversible metal hydride

2017-08-29


ISO/DIS 17268 * Gaseous hydrogen land vehicle refuelling connection devices

2017-09-07


ISO/DIS 19880-2

* Gaseous hydrogen — Fueling stations — Part 2: Dispensers

ISO/DIS 19880-8

* Gaseous hydrogen — Fueling stations — Part 8: Fuel quality control

2017-09-12

ISO/DIS 19881 * Gaseous hydrogen — Land vehicle fuel containers

2017-09-21

ISO/DIS 19882 * Gaseous hydrogen — Thermally activated pressure relief devices for compressed hydrogen vehi-cle fuel containers

2017-09-21


ISO/DIS 20379 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement of thixotropic behaviour of ceramic slurry by use of a rotation-al viscometer

2017-09-18


ISO/DIS 14064-1

* Greenhouse gases — Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals

2017-09-21


ISO/DIS 14064-2

* Greenhouse gases — Part 2: Specification with guidance at the project level for quantifica-tion, monitoring and reporting of greenhouse gas emission reduc-tions or removal enhancements

2017-09-21


TC 210 Quality management and corresponding general as-pects for medical devices

ISO/DIS 18250-7

* Connectors for reservoir delivery systems for healthcare applica-tions — Part 7: Conectors for Intravascular Infusion

2017-09-04


TC 213 Dimensional and geometri-cal product specifications and verification

ISO 14405-2:2011/DAmd 1

* Geometrical product specifica-tions (GPS) — Dimensional tolerancing — Part 2: Dimen-sions other than linear sizes — Amendment 1

2017-08-30

TC 215 Health informatics

ISO/DIS 11238 * Health informatics — Identifica-tion of medicinal products — Data elements and structures for the unique identification and exchange of regulated informa-tion on substances

2017-09-19


TC 219 Floor coverings

ISO/DIS 23999 * Resilient floor coverings — De-termination of dimensional sta-bility and curling after exposure to heat

2017-09-21


TC 265 Carbon dioxide capture, transportation, and geo-logical storage

ISO/DIS 27919-1

* Carbon dioxide capture — Part 1: Performance evaluation methods for post-combustion CO2 capture integrated with a power plant

2017-09-12

TMBG Technical Management Board - groups

ISO/IEC DIS 80079-34

Explosive atmospheres — Part 34: Application of quality sys-tems for ex product manufacture

2017-09-08

(Revision of ISO/IEC 80079-34:2011)

IULTCS International Union of Leather Technologists and Chemists Societies

ISO/DIS 17075-3

* Leather — Chemical determina-tion of chromium(VI) content in leather — Part 3: Thermal pre-ageing of leather and determina-tion of hexavalent chromium

2017-08-29

ISO/DIS 22517 * Leather — Chemical tests — De-termination of pesticide residues content in leather

2017-08-29

ISO/DIS 23702-1

* Leather - Organic fluorine — Part 1: Determination of the non-volatile compound content by extraction method using liquid chromatography

2017-09-22


ISO/IEC DIS 12034-1

* Information technology — Ar-chive eXchange Format (AXF) — Part 1: Structure and semantics

2017-08-25

ISO/IEC/IEEE DIS 42020

* Enterprise, systems and soft-ware — Architecture processes

2017-08-25

ISO/IEC DIS 14443-1

* Identification cards — Contact-less integrated circuit cards — Proximity cards — Part 1: Physical characteristics

2017-09-06


ISO/IEC DIS 14443-2

* Identification cards — Contact-less integrated circuit cards — Proximity cards — Part 2: Radio frequency power and signal interface

2017-09-18


ISO/IEC DIS 14443-3

* Identification cards — Contact-less integrated circuit cards — Proximity cards — Part 3: Initialization and anticollision

2017-09-05


ISO/IEC DIS 14443-4

* Identification cards — Contact-less integrated circuit(s) cards — Proximity cards — Part 4: Transmission protocol

2017-09-05


ISO/IEC DIS 14882

* Programming languages — C++

2017-09-04

(Revision of ISO/IEC 14882:2014)

ISO/IEC 21000-19:2010/DAmd 1.2

Information technology — Mul-timedia framework (MPEG-21) — Part 19: Media Value Chain Ontology — Amendment 1: Ex-tensions on time-segments and multi-track audio

2017-08-08

FDIS circulated


These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown


Vote terminates

TC 6 Paper, board and pulps

ISO/FDIS 2528 * Sheet materials — Determination of water vapour transmission rate (WVTR) — Gravimetric (dish) method

2017-08-19



ISO/FDIS 20154

* Ships and marine technology — Guidelines on vibration isolation design methods for shipboard auxiliary machinery

TC 10 Technical product documentation

ISO/FDIS 8887-1

* Technical product documenta-tion — Design for manufactur-ing, assembling, disassembling and end-of-life processing — Part 1: General concepts and requirements

2017-08-15


ISO/FDIS 6412-1

* Technical drawings — Simpli-fied representation of pipelines — Part 1: General rules and orthogonal representation

2017-09-21


ISO/FDIS 6412-2

* Technical drawings — Simplified representation of pipelines — Part 2: Isometric projection

2017-09-21


ISO/FDIS 6412-3

* Technical drawings — Simpli-fied representation of pipelines — Part 3: Terminal features of ventilation and drainage systems

2017-09-21



ISO/FDIS 11532

* Aircraft ground equipment — Graphical symbols

2017-08-10


TC 21 Equipment for fire protec-tion and fire fighting

ISO/FDIS 7240-2

* Fire detection and alarm systems — Part 2: Fire detection control and indicating equipment

2017-08-24



ISO/FDIS 4254-7

* Agricultural machinery — Safety — Part 7: Combine harvest-ers, forage harvesters, cotton harvesters and sugar cane harversters

2017-08-20


ISO/FDIS 8437-1

* Snow throwers — Safety require-ments and test procedures — Part 1: Terminology and common tests

2017-08-02


ISO/FDIS 8437-2

* Snow throwers — Safety require-ments and test procedures — Part 2: Pedestrian controlled snow throwers

2017-08-02


ISO/FDIS 8437-3

* Snow throwers — Safety require-ments and test procedures — Part 3: Ride-on snow throwers

2017-08-02


ISO/FDIS 8437-4

* Snow throwers — Safety require-ments and test procedures — Part 4: Information on national and regional provisions

2017-08-02


TC 31 Tyres, rims and valves

ISO/FDIS 18804

* Rims for agricultural, forestry and construction machines

2017-08-18


ISO/FDIS 18805

* Tyre classification — Agricul-tural, forestry and construction machines

2017-08-06

TC 34 Food products

ISO/FDIS 21294

* Oilseeds — Manual or automatic discontinuous sampling


TC 38 Textiles

ISO/FDIS 105-B03

* Textiles — Tests for colour fastness — Part B03: Colour fastness to weathering: Outdoor exposure

2017-09-15

(Revision of ISO 105-B03:1994)

TC 43 Acoustics

ISO 16283-1:2014/FDAmd 1

* Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 1: Airborne sound insulation — Amendment 1

2017-08-17


ISO/FDIS 17640

* Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment

2017-08-18



ISO/FDIS 11237

* Rubber hoses and hose as-semblies — Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification

2017-08-19


ISO/FDIS 16301

* Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for manually operated hydraulic jacks — Specification

2017-08-18

ISO/FDIS 2930 * Rubber, raw natural — Deter-mination of plasticity retention index (PRI)

2017-08-02


ISO/FDIS 20057

* Rubber household gloves — General requirements and test methods

2017-08-06

TC 46 Information and documentation

ISO/FDIS 20614

* Information and documentation — Data exchange protocol for interoperability and preservation

2017-08-12

TC 58 Gas cylinders

ISO/FDIS 11363-1

* Gas cylinders — 17E and 25E taper threads for connection of valves to gas cylinders — Part 1: Specifications

2017-08-24

(Revision of ISO 11363-1:2010, ISO 11363-1:2010/Cor 1:2011, ISO 11363-1:2010/Cor 2:2012)

ISO/FDIS 11363-2

* Gas cylinders — 17E and 25E taper threads for connection of valves to gas cylinders — Part 2: Inspection gauges

2017-08-09


TC 59 Buildings and civil engi-neering works

ISO/FDIS 6707-1

* Buildings and civil engineering works — Vocabulary — Part 1: General terms

2017-08-23


(Revision of ISO 2444:1988, ISO 6707-1:2014)

ISO/FDIS 6707-2

* Buildings and civil engineering works — Vocabulary — Part 2: Contract and communication terms

2017-08-23


TC 61 Plastics

ISO/FDIS 10350-1

* Plastics — Acquisition and pres-entation of comparable single-point data — Part 1: Moulding materials

2017-08-09

(Revision of ISO 10350-1:2007, ISO 10350-1:2007/Amd 1:2014)

TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries

ISO/FDIS 13623

* Petroleum and natural gas indus-tries — Pipeline transportation systems

2017-08-19


ISO/FDIS 19905-3

* Petroleum and natural gas indus-tries — Site-specific assess-ment of mobile offshore units — Part 3: Floating unit

2017-08-12

TC 69 Applications of statistical methods

ISO/FDIS 28598-1

* Acceptance sampling proce-dures based on the allocation of priorities principle (APP) — Part 1: Guidelines for the APP approach

2017-08-02


ISO/FDIS 28598-2

* Acceptance sampling proce-dures based on the allocation of priorities principle (APP) — Part 2: Coordinated single sampling plans for acceptance sampling by attributes

2017-08-02


TC 79 Light metals and their alloys

ISO/FDIS 3210 * Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxidation coat-ings by measurement of the loss of mass after immersion in acid solution(s)

2017-08-24


TC 85 Nuclear energy, nuclear technologies, and radio-logical protection

ISO/FDIS 18557

* Characterisation principles for soils, buildings and infrastruc-tures contaminated by radionu-clides for remediation purposes

2017-08-08

TC 86 Refrigeration and air-conditioning

ISO 817:2014/FDAmd 1

Refrigerants — Designation and safety classification — Amend-ment 1

2017-08-24

TC 87 Cork

ISO/FDIS 4708 * Composition cork — Gasket material — Test methods

2017-08-05


TC 94 Personal safety -- Pro-tective clothing and equipment

ISO/FDIS 19918

* Protective clothing — Protection against chemicals — Measure-ment of cumulative permeation of chemicals with low vapour pressure through materials

2017-08-11

ISO/FDIS 27065

* Protective clothing — Perfor-mance requirements for protec-tive clothing worn by operators applying pesticides and for re-entry workers

2017-08-11


ISO/FDIS 16975-3

* Respiratory protective devices — Selection, use and maintenance — Part 3: Fit testing procedures

2017-07-30

TC 107 Metallic and other inorgan-ic coatings

ISO/FDIS 2063-1

* Thermal spraying — Zinc, alu-minium and their alloys — Part 1: Design considerations and qual-ity requirements for corrosion protection systems

2017-07-30


ISO/FDIS 2063-2

* Thermal spraying — Zinc, alu-minium and their alloys — Part 2: Execution of corrosion protec-tion systems

2017-07-30


ISO/FDIS 9717 * Metallic and other inorganic coatings — Phosphate conver-sion coating of metals

2017-08-20


TC 108 Mechanical vibration, shock and condition monitoring

ISO/FDIS 13373-9

* Condition monitoring and diag-nostics of machines — Vibration condition monitoring — Part 9: Diagnostic techniques for elec-tric motors

2017-07-30

TC 118 Compressors and pneu-matic tools, machines and equipment

ISO 5390:1977/FDAmd 1

* Compressors — Classification — Amendment 1

2017-08-09


ISO/FDIS 17757

* Earth-moving machinery and mining — Autonomous and semi-autonomous machine system safety

2017-08-12

TC 130 Graphic technology

ISO/FDIS 17972-3

* Graphic technology — Colour data exchange format (CxF/X) — Part 3: Output target data (CxF/X-3)

2017-08-20


ISO/FDIS 5782-1

* Pneumatic fluid power — Com-pressed air filters — Part 1: Main characteristics to be included in suppliers' literature and product marking requirements

2017-08-25



ISO/FDIS 6301-1

* Pneumatic fluid power — Com-pressed-air lubricators — Part 1: Main characteristics to be in-cluded in supplier's literature and product-marking requirements

2017-08-09


ISO/FDIS 12669

* Hydraulic fluid power — Method for determining the required cleanliness level (RCL) of a system

2017-08-02


ISO/FDIS 16371-2

* Non-destructive testing — In-dustrial computed radiography with storage phosphor imag-ing plates — Part 2: General principles for testing of metal-lic materials using X-rays and gamma rays

2017-08-04


ISO/FDIS 11295

* Classification and information on design and applications of plastics piping systems used for renovation and replacement

2017-08-09


ISO/FDIS 11296-2

* Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 2: Lining with continuous pipes

2017-08-09

ISO/FDIS 11297-2

* Plastics piping systems for reno-vation of underground drainage and sewerage networks under pressure — Part 2: Lining with continuous pipes

2017-08-13

ISO/FDIS 11298-2

* Plastics piping systems for renovation of underground water supply networks — Part 2: Lining with continuous pipes


ISO/FDIS 9696 * Water quality — Gross alpha activity — Test method using thick source

2017-08-18


TC 160 Glass in building

ISO/FDIS 18543

* Glass in building — Electro-chromic glazings — Accelerated ageing test and requirements


ISO/FDIS 8478 * Optics and photonics — Camera lenses — Measurement of ISO spectral transmittance

2017-08-15


TC 180 Solar energy

ISO/FDIS 9806 * Solar energy — Solar thermal collectors — Test methods


TC 182 Geotechnics

ISO/FDIS 18674-3

* Geotechnical investigation and testing — Geotechnical monitoring by field instrumenta-tion — Part 3: Measurement of displacements across a line: inclinometers

2017-08-02


ISO/FDIS 20407

* Fine ceramics (advanced ceram-ics, advanced technical ceram-ics) — Test method for interfacial tensile and shear fatigue proper-ties of ceramic joining loaded in constant amplitude at room temperature

2017-08-14

TC 218 Timber

ISO/FDIS 13061-10

* Physical and mechanical proper-ties of wood — Test methods for small clear wood specimens — Part 10: Determination of impact bending strength

2017-08-18


ISO/FDIS 13061-11

* Physical and mechanical proper-ties of wood — Test methods for small clear wood specimens — Part 11: Determination of resist-ance to impact indentation

2017-08-18


ISO/FDIS 13061-12

* Physical and mechanical proper-ties of wood — Test methods for small clear wood specimens — Part 12: Determination of static hardness

2017-08-18


ISO/FDIS 13061-17

* Physical and mechanical proper-ties of wood — Test methods for small clear wood specimens — Part 17: Determination of ultimate stress in compression parallel to grain

2017-08-18



ISO/IEC FDIS 19513

* Information technology — Ob-ject Management Group Unified Profile for DoDAF and MODAF (UPDM), 2.1.1

2017-08-04

ISO/IEC/IEEE FDIS 12207

* Systems and software engi-neering — Software life cycle processes

2017-08-05

(Revision of ISO/IEC 12207:2008)

ISO/IEC FDIS 27034-5

* Information technology — Se-curity techniques — Application security — Part 5: Protocols and application security controls data structure

2017-08-05


* Information technology — Scal-able compression and coding of continuous-tone still images — Part 4: Conformance testing

2017-08-15

ISO/IEC FDIS 23008-12.2

* Information technology — MPEG systems technologies — Part 12: Image File Format

2017-08-15


* Information technology — Au-tomatic identification and data capture techniques — Part 10: Crypto suite AES-128 secu-rity services for air interface communications

2017-08-10



* Information technology — Bio-metric sample quality — Part 4: Finger image data

(Revision of ISO/IEC TR 29794-4:2010)



Information technology — Data centres — Key performance in-dicators — Part 4: IT Equipment Energy Efficiency for servers (ITEEsv)

2017-08-15

Standards published

New International Standards published between 01 June and 30 June 2017


** French version of standard previously published in English only

Price

group

TC 5 Ferrous metal pipes and metallic fittings

ISO 18468:2017

* Ductile iron fittings, accessories and their joints and valves — Epoxy coating

B


ISO 11093-8:2017

Paper and board — Testing of cores — Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis

B


ISO 20438:2017

* Ships and marine technology — Off-shore mooring chains

D

TC 17 Steel

ISO 377:2017 Steel and steel products — Location and preparation of samples and test pieces for mechanical testing

D


ISO 2635:2003/Amd 1:2017

* Aircraft — Conductors for general purpose aircraft electrical cables and aerospace applications — Dimensions and characteristics — Amendment 1: Correction of table 1

XZ

ISO 17770:2017

* Space systems — Cube satellites (CubeSats)

B

ISO 19923:2017

* Space environment (natural and artifi-cial) — Plasma environments for gener-ation of worst case electrical potential differences for spacecraft

C

TC 21 Equipment for fire protection and fire fighting

ISO/TS 7240-29:2017

* Fire detection and alarm systems — Part 29: Video fire detectors

H

TC 29 Small tools

ISO/TS 13399-60:2014

Cutting tool data representation and exchange — Part 60: Reference dic-tionary for connection systems

H

ISO 2725-1:2017

Assembly tools for screws and nuts — Square drive sockets — Part 1: Hand-operated sockets

B

ISO 2725-2:2017

Assembly tools for screws and nuts — Square drive sockets — Part 2: Machine-operated sockets ("impact")

B

ISO 2725-3:2017

Assembly tools for screws and nuts — Square drive sockets — Part 3: Ma-chine-operated sockets ("non-impact")

A

TC 34 Food products

ISO 10272-1:2017

Microbiology of the food chain — Horizontal method for detection and enumeration of Campylobacter spp. — Part 1: Detection method

D

ISO 10272-2:2017

Microbiology of the food chain — Horizontal method for detection and enumeration of Campylobacter spp. — Part 2: Colony-count technique

D

ISO 19020:2017

Microbiology of the food chain — Horizontal method for the immunoen-zymatic detection of staphylococcal enterotoxins in foodstuffs

D

ISO 19343:2017

Microbiology of the food chain — De-tection and quantification of histamine in fish and fishery products — HPLC method

C

ISO 21528-1:2017

Microbiology of the food chain — Hori-zontal method for the detection and enumeration of Enterobacteriaceae — Part 1: Detection of Enterobacteriaceae

C

ISO 21528-2:2017

Microbiology of the food chain — Hori-zontal method for the detection and enumeration of Enterobacteriaceae — Part 2: Colony-count technique

C

TC 35 Paints and varnishes

ISO 19403-1:2017

* Paints and varnishes — Wettabil-ity — Part 1: Terminology and general principles

B

ISO 19403-2:2017

* Paints and varnishes — Wettability — Part 2: Determination of the surface free energy of solid surfaces by meas-uring the contact angle

C

ISO 19403-3:2017

* Paints and varnishes — Wettability — Part 3: Determination of the surface tension of liquids using the pendant drop method

B

ISO 19403-4:2017

* Paints and varnishes — Wettability — Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension

B

ISO 19403-5:2017

* Paints and varnishes — Wettability — Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy

A

ISO 19403-6:2017

* Paints and varnishes — Wettability — Part 6: Measurement of dynamic contact angle

B


ISO 19403-7:2017

* Paints and varnishes — Wettability — Part 7: Measurement of the contact angle on a tilt stage (roll-off angle)

C

TC 43 Acoustics

ISO 532-1:2017

* Acoustics — Methods for calculating loudness — Part 1: Zwicker method

G

ISO 532-2:2017

* Acoustics — Methods for calculating loudness — Part 2: Moore-Glasberg method

E


ISO 6472:2017 Rubber compounding ingredients — Abbreviated terms

C

ISO 2878:2017 Rubber, vulcanized or thermoplastic — Antistatic and conductive products — Determination of electrical resistance

B

ISO 4662:2017 Rubber, vulcanized or thermoplastic — Determination of rebound resilience

E

ISO 5600:2017 * Rubber — Determination of adhesion to rigid materials using conical shaped parts

B

ISO 1795:2017 Rubber, raw natural and raw synthetic — Sampling and further preparative procedures

A

ISO 20299-2:2017

Film for wrapping rubber bales — Part 2: Natural rubber

A

TC 58 Gas cylinders

ISO 13338:2017

* Gas cylinders — Gases and gas mix-tures — Determination of tissue cor-rosiveness for the selection of cylinder valve outlets

B

TC 61 Plastics

ISO/TS 15791-2:2017

* Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 2: Use of intermedi-ate-scale tests for semi-finished and finished products

C

ISO 22007-4:2017

Plastics — Determination of thermal conductivity and thermal diffusivity — Part 4: Laser flash method

C

ISO 15064:2017

* Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of the isomer ratio in toluenediisocyanate (TDI)

B

TC 67 Materials, equipment and off-shore structures for petroleum, petrochemical and natural gas industries

ISO 21809-5:2017

Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 5: External concrete coatings

E

TC 77 Products in fibre reinforced cement

ISO 8336:2017 * Fibre-cement flat sheets — Product specification and test methods

F

TC 83 Sports and other recreational facilities and equipment

ISO 19202-1:2017

Summer toboggan runs — Part 1: Safety requirements and test methods

F

ISO 19202-2:2017

Summer toboggan runs — Part 2: Safety requirements for operation

E

TC 85 Nuclear energy, nuclear tech-nologies, and radiological protection

ISO 12800:2017

Nuclear fuel technology — Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method

B

TC 92 Fire safety

ISO/TR 16576:2017

* Fire safety engineering — Examples of fire safety objectives, functional requirements and safety criteria

H


ISO 2408:2017 * Steel wire ropes — Requirements

F

TC 106 Dentistry

ISO/TR 18845:2017

Dentistry — Test methods for machin-ing accuracy of computer-aided milling machines

E

TC 113 Hydrometry

ISO 4359:2013/Amd 1:2017

* Flow measurement structures — Rec-tangular, trapezoidal and U-shaped flumes — Amendment 1

XZ

TC 123 Plain bearings

ISO 4378-1:2017

Plain bearings — Terms, definitions, classification and symbols — Part 1: Design, bearing materials and their properties

F

ISO 4378-2:2017

Plain bearings — Terms, definitions, classification and symbols — Part 2: Friction and wear

B

ISO 4378-3:2017

Plain bearings — Terms, definitions, classification and symbols — Part 3: Lubrication

D


ISO 6605:2017 Hydraulic fluid power — Test methods for hoses and hose assemblies

B

TC 133 Clothing sizing systems - size designation, size measurement methods and digital fittings

ISO 5971:2017 Size designation of clothes — Tights

B



ISO 7510:2017 * Plastics piping systems — Glass-reinforced plastics (GRP) components — Determination of the amounts of constituents

A

ISO 16611:2017

* Plastics piping systems for drainage and sewerage without pressure — Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) — Dimensions, require-ments and tests

D

ISO/TS 20656-1:2017

* Plastics piping systems — General rules for structural design of glass-reinforced thermosetting plastics (GRP) pipes — Part 1: Buried pipes

D

TC 146 Air quality

ISO/TS 20593:2017

Ambient air — Determination of the mass concentration of tire and road wear particles (TRWP) — Pyrolysis-GC-MS method

E


ISO 13843:2017

Water quality — Requirements for es-tablishing performance characteristics of quantitative microbiological methods

G

ISO 20227:2017

* Water quality — Determination of the growth inhibition effects of waste waters, natural waters and chemicals on the duckweed Spirodela polyrhiza — Method using a stock culture inde-pendent microbiotest

B

TC 150 Implants for surgery

ISO 7199:2016 Cardiovascular implants and artificial organs — Blood-gas exchangers (oxygenators)

C

ISO 11491:2017

* Implants for surgery — Determination of impact resistance of ceramic femo-ral heads for hip joint prostheses

B

ISO 18192-3:2017

* Implants for surgery — Wear of total intervertebral spinal disc prostheses — Part 3: Impingement-wear testing and corresponding environmental condi-tions for test of lumbar prostheses under adverse kinematic conditions

C

TC 155 Nickel and nickel alloys

ISO 9725:2017 Nickel and nickel alloy forgings

C

TC 163 Thermal performance and en-ergy use in the built environment

ISO 17772-1:2017

* Energy performance of buildings — Indoor environmental quality — Part 1: Indoor environmental input parameters for the design and assessment of energy performance of buildings

G

ISO 52000-1:2017

Energy performance of buildings — Overarching EPB assessment — Part 1: General framework and procedures

H

ISO/TR 52000-2:2017

* Energy performance of buildings — Overarching EPB assessment — Part 2: Explanation and justification of ISO 52000-1

H

ISO 52003-1:2017

Energy performance of buildings — Indicators, requirements, ratings and certificates — Part 1: General aspects and application to the overall energy performance

E

ISO/TR 52003-2:2017

* Energy performance of buildings — Indicators, requirements, ratings and certificates — Part 2: Explanation and justification of ISO 52003-1

E

ISO 6946:2017 Building components and building elements — Thermal resistance and thermal transmittance — Calculation methods

F

ISO 10077-1:2017

Thermal performance of windows, doors and shutters — Calculation of thermal transmittance — Part 1: General

F

ISO 10077-2:2017

Thermal performance of windows, doors and shutters — Calculation of thermal transmittance — Part 2: Nu-merical method for frames

G

ISO 10211:2017

Thermal bridges in building construc-tion — Heat flows and surface tem-peratures — Detailed calculations

G

ISO 12631:2017

Thermal performance of curtain walling — Calculation of thermal transmittance

F

ISO 13370:2017

Thermal performance of buildings — Heat transfer via the ground — Calcu-lation methods

F

ISO 13786:2017

Thermal performance of building com-ponents — Dynamic thermal character-istics — Calculation methods

D

ISO 13789:2017

Thermal performance of buildings — Transmission and ventilation heat transfer coefficients — Calculation method

D

ISO 14683:2017

Thermal bridges in building construc-tion — Linear thermal transmittance — Simplified methods and default values

D

ISO 52010-1:2017

Energy performance of buildings — External climatic conditions — Part 1: Conversion of climatic data for energy calculations

E

ISO/TR 52010-2:2017

* Energy performance of buildings - External climatic conditions — Part 2: Explanation and justification of ISO 52010-1

D

ISO 52016-1:2017

Energy performance of buildings — Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads — Part 1: Calculation procedures

H

ISO/TR 52016-2:2017

* Energy performance of buildings — Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads — Part 2: Explanation and justification of ISO 52016-1 and ISO 52017-1

H

ISO 52017-1:2017

Energy performance of buildings — Sensible and latent heat loads and in-ternal temperatures — Part 1: Generic calculation procedures

E

ISO 52018-1:2017

Energy performance of buildings — Indicators for partial EPB requirements related to thermal energy balance and fabric features — Part 1: Overview of options

F


ISO/TR 52018-2:2017

* Energy performance of buildings — Indicators for partial EPB requirements related to thermal energy balance and fabric features — Part 2: Explanation and justification of ISO 52018-1

F

ISO/TR 52019-2:2017

* Energy performance of buildings — Hygrothermal performance of building components and building elements — Part 2: Explanation and justification

G

ISO 52022-1:2017

Energy performance of buildings — Thermal, solar and daylight properties of building components and ele-ments — Part 1: Simplified calculation method of the solar and daylight char-acteristics for solar protection devices combined with glazing

C

ISO/TR 52022-2:2017

Energy performance of buildings — Thermal, solar and daylight properties of building components and elements — Part 2: Explanation and justification

F

ISO 52022-3:2017

Energy performance of buildings — Thermal, solar and daylight properties of building components and elements — Part 3: Detailed calculation method of the solar and daylight characteristics for solar protection devices combined with glazing

E

TC 164 Mechanical testing of metals

ISO 24213:2017

* Metallic materials — Sheet and strip — Method for springback evaluation in stretch bending

B

ISO 1099:2017 * Metallic materials — Fatigue testing — Axial force-controlled method

D

TC 165 Timber structures

ISO 8375:2017 * Timber structures — Glued laminated timber — Test methods for determi-nation of physical and mechanical properties

D

TC 168 Prosthetics and orthotics

ISO 8548-5:2003

Prosthetics and orthotics — Limb deficiencies — Part 5: Description of the clinical condition of the person who has had an amputation

A

TC 171 Document management applications

ISO 18829:2017

* Document management — Assess-ing ECM/EDRM implementations — Trustworthiness

B

ISO 22938:2017

* Document management — Electronic content/document management (CDM) data interchange format

C


ISO 8255-1:2017

* Microscopes — Cover glasses — Part 1: Dimensional tolerances, thickness and optical properties

A

TC 173 Assistive products for persons with disability

ISO 15621:2017

* Absorbent incontinence aids for urine and/or faeces — General guidelines on evaluation

B

TC 183 Copper, lead, zinc and nickel ores and concentrates

ISO 11790:2017

* Copper, lead, zinc and nickel concen-trates — Guidelines for the inspection of mechanical sampling systems

C

ISO 11794:2017

* Copper, lead, zinc and nickel concen-trates — Sampling of slurries

F

TC 195 Building construction machinery and equipment

ISO 19720-1:2017

* Building construction machinery and equipment — Plants for the prepara-tion of concrete and mortar — Part 1: Terminology and commercial specifications

D

TC 198 Sterilization of health care products

ISO 11137-3:2017

Sterilization of health care products — Radiation — Part 3: Guidance on dosimetric aspects of development, validation and routine control

F


ISO 12813:2015/Amd 1:2017

* Electronic fee collection — Compliance check communication for autonomous systems — Amendment 1

XZ

ISO 13111-1:2017

* Intelligent transport systems (ITS) — The use of personal ITS station to sup-port ITS service provision for travellers — Part 1: General information and use case definitions

E

ISO 13141:2015/Amd 1:2017

* Electronic fee collection — Localisa-tion augmentation communication for autonomous systems — Amendment 1

XZ

ISO 15638-10:2017

* Intelligent transport systems — Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV) — Part 10: Emergency messaging system/eCall

F

ISO 15638-18:2017

* Intelligent transport systems — Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV) — Part 18: ADR (Dangerous Goods)

G

ISO 17361:2017

* Intelligent transport systems — Lane departure warning systems — Per-formance requirements and test procedures

B

ISO/TS 21219-7:2017

* Intelligent transport systems — Traffic and travel information (TTI) via trans-port protocol experts group, generation 2 (TPEG2) — Part 7: Location referenc-ing container (TPEG2-LRC)

C

ISO/TS 21219-22:2017

* Intelligent transport systems — Traffic and travel information (TTI) via trans-port protocol experts group, generation 2 (TPEG2) — Part 22: OpenLR location referencing (TPEG2-OLR)

G

TC 205 Building environment design

ISO 16484-5:2017

* Building automation and control sys-tems (BACS) — Part 5: Data communi-cation protocol

H


ISO 19628:2017

Fine ceramics (advanced ceramics, advanced technical ceramics) — Ther-mophysical properties of ceramic com-posites — Determination of specific heat capacity

D



ISO/TR 14073:2017

* Environmental management — Water footprint — Illustrative examples on how to apply ISO 14046

G

TC 210 Quality management and cor-responding general aspects for medical devices

ISO/TR 80002-2:2017

* Medical device software — Part 2: Vali-dation of software for medical device quality systems

H


ISO/TR 18638:2017

* Health informatics — Guidance on health information privacy education in healthcare organizations

E

TC 217 Cosmetics

ISO 16212:2017

Cosmetics — Microbiology — Enu-meration of yeast and mould

D

ISO/TR 18818:2017

* Cosmetics — Analytical method — De-tection and quantitative determination of Diethanolamine (DEA) by GC/MS

B


ISO 11378-2:2001/Amd 1:2017

Textile floor coverings — Laboratory soiling tests — Part 2: Drum test — Amendment 1

XZ

TC 227 Springs

ISO 26910-1:2009/Amd 1:2017

Springs — Shot peening — Part 1: General procedures — Amendment 1

XZ

TC 229 Nanotechnologies

ISO/TR 19601:2017

* Nanotechnologies — Aerosol gen-eration for air exposure studies of nano-objects and their aggregates and agglomerates (NOAA)

G

ISO/TS 80004-11:2017

Nanotechnologies — Vocabulary — Part 11: Nanolayer, nanocoating, nanofilm, and related terms

B

TC 281 Fine bubble technology

ISO 20480-1:2017

* Fine bubble technology — General principles for usage and measurement of fine bubbles — Part 1: Terminology

A


ISO 10377:2013

Consumer product safety — Guidelines for suppliers

F

CASCO Committee on conformity assessment

ISO/IEC TR 17028:2017

* Conformity assessment — Guidelines and examples of a certification scheme for services

E


ISO/IEC 29341-1-2:2017

* Information technology — UPnP Device Architecture — Part 1-2: UPnP Device Architecture Version 2.0

H

ISO/IEC 29341-30-1:2017

* Information technology — UPnP Device Architecture — Part 30-1: IoT management and control device con-trol protocol — IoT management and control architecture overview

F

ISO/IEC 29341-30-2:2017

* Information technology — UPnP Device Architecture — Part 30-2: IoT management and control device con-trol protocol — IoT management and control device

B

ISO/IEC 29341-30-10:2017

* Information technology — UPnP Device Architecture — Part 30-10: IoT management and control device con-trol protocol — Data store service

F

ISO/IEC 29341-30-11:2017

* Information technology — UPnP Device Architecture — Part 30-11: IoT management and control device con-trol protocol — IoT management and control data model service

H

ISO/IEC 29341-30-12:2017

* Information technology — UPnP Device Architecture — Part 30-12: IoT management and control device con-trol protocol — IoT management and control transport generic service

D

ISO/IEC/IEEE 15289:2017

* Systems and software engineering — Content of life-cycle information items (documentation)

H

ISO/IEC TS 25011:2017

* Information technology — Systems and software quality requirements and evaluation (SQuaRE) — Service quality models

D

ISO/IEC 29134:2017

* Information technology — Security techniques — Guidelines for privacy impact assessment

F

ISO/IEC 18477-7:2017

* Information technology — Scalable compression and coding of continu-ous-tone still images — Part 7: HDR Floating-Point Coding

F

ISO/IEC 20000-6:2017

* Information technology — Service management — Part 6: Requirements for bodies providing audit and certifica-tion of service management systems

C

Standards confirmed

The following International Standards are confimred for a five year period:


ISO 2470-2:2008 (reconfirmed)

ISO 2471:2008 (reconfirmed)


TC 17 Steel








ISO 11892:2012

ISO 14300-1:2011

ISO 14300-2:2011

ISO 26869:2012

TC 22 Road vehicles

ISO 6722-1:2011


ISO 14572:2011






TC 24 Particle characterization including sieving









TC 26 Copper and copper alloys


TC 28 Petroleum and related products, fuels and lubricants from natural or synthetic sources

ISO 18132-1:2011


ISO 18132-3:2011

TC 29 Small tools

ISO/TS 13399-2:2014

ISO/TS 13399-3:2014

ISO/TS 13399-4:2014

ISO/TS 13399-5:2014

ISO 3685:1993

ISO 4875-1:2006

ISO 4875-2:2006

ISO 6987:2012

TC 33 Refractories

ISO 14719:2011




TC 34 Food products

ISO 11746:2012













ISO 22118:2011

ISO 22119:2011


ISO/TS 23647:2010

(reconfirmed)

TC 35 Paints and varnishes


ISO 19840:2012

TC 37 Terminology and other language and content resources


TC 38 Textiles

ISO 105-A06:1995 (reconfirmed)

ISO 105-A08:2001 (reconfirmed)

ISO 105-B08:1995 (reconfirmed)

ISO 105-F01:2001 (reconfirmed)




ISO 105-Z04:1995 (reconfirmed)




TC 42 Photography

ISO 12231:2012

ISO 12234-1:2012


ISO 17321-1:2012




ISO 18913:2012


ISO 18926:2012

ISO 18929:2012

ISO 18933:2012

ISO 18936:2012

ISO 20462-3:2012


TC 43 Acoustics



ISO 28961:2012


ISO 3745:2012


ISO/TS 4869-5:2006

(reconfirmed)



ISO/TS 7849-1:2009

(reconfirmed)


ISO 10302-2:2011






ISO/TS 13475-2:2000

(reconfirmed)



ISO/TS 15666:2003

(reconfirmed)


ISO 3382-3:2012







ISO 127:2012

ISO 248-2:2012

ISO 4652:2012

ISO 4656:2012

ISO 14932:2012

ISO/TS 16095:2014

ISO/TS 16096:2014

ISO/TS 16176:2011

(reconfirmed)


ISO 21461:2012

TC 48 Laboratory equipment



TC 58 Gas cylinders





TC 59 Buildings and civil engineering works

ISO/TS 12720:2014

TC 61 Plastics






ISO 3673-2:2012







TC 67 Materials, equipment and offshore structures for petroleum, petrochemi-cal and natural gas industries

ISO 10426-2:2003

ISO 10431:1993

ISO 13534:2000

ISO 13628-1:2005

ISO 13628-7:2005

TC 69 Applications of statistical methods

ISO 7870-3:2012



TC 72 Textile machinery and accessories












TC 74 Cement and lime



TC 85 Nuclear energy, nuclear technologies, and radiological protection

ISO 2919:2012





TC 92 Fire safety

ISO/TS 3814:2014

ISO/TS 5658-1:2006

(reconfirmed)


TC 96 Cranes

ISO 11660-4:2012


TC 102 Iron ore and direct reduced iron





TC 106 Dentistry



ISO 21672-1:2012

TC 108 Mechanical vibration, shock and condi-tion monitoring


ISO 10068:2012

ISO/TS 15694:2004

(reconfirmed)

TC 110 Industrial trucks


ISO 22915-11:2011

TC 113 Hydrometry

ISO/TS 15768:2000

(reconfirmed)

ISO/TS 3716:2006 (reconfirmed)

TC 118 Compressors and pneumatic tools, machines and equipment




ISO 80601-2-13:2011



TC 130 Graphic technology

ISO 12647-8:2012

ISO 16684-1:2012



ISO 16431:2012

ISO 3601-1:2012


ISO 16810:2012

ISO 16811:2012

ISO 16823:2012

ISO 16826:2012

ISO 16827:2012

ISO 16828:2012

ISO 16831:2012



ISO/TS 19911:2010

(reconfirmed)

ISO/TS 26873:2010

(reconfirmed)

ISO/TS 10465-1:2007

(reconfirmed)

TC 145 Graphical symbols

ISO 3864-3:2012

TC 146 Air quality

ISO 13138:2012

ISO 28902-1:2012

TC 154 Processes, data elements and docu-ments in commerce, industry and administration




TC 155 Nickel and nickel alloys



TC 156 Corrosion of metals and alloys

ISO 9223:2012

ISO 9224:2012

ISO 9225:2012

ISO 9226:2012

ISO 17474:2012

ISO 21608:2012



TC 164 Mechanical testing of metals

ISO 9513:2012

TC 170 Surgical instruments


TC 171 Document management applications







ISO 12651-1:2012






ISO/TS 24348:2014

TC 188 Small craft





TC 190 Soil quality

ISO 12914:2012

ISO 11269-1:2012

ISO 11269-2:2012

TC 192 Gas turbines






TC 194 Biological and clinical evaluation of medical devices

ISO 13022:2012

TC 198 Sterilization of health care products

ISO/TS 13004:2013


ISO 14161:2009

ISO/TS 17665-3:2013





TC 213 Dimensional and geometrical product specifications and verification

ISO 1119:2011





ISO 15530-3:2011

ISO/TS 16610-32:2009

(reconfirmed)

ISO 17450-1:2011

ISO 22432:2011

ISO 25178-2:2012


ISO/TS 18530:2014

ISO/TS 21547:2010

(reconfirmed)

ISO/TS 22789:2010

(reconfirmed)

ISO/TS 29585:2010

(reconfirmed)












TC 222 Personal financial planning


TC 228 Tourism and related services

ISO 13289:2011

ISO 13970:2011

TC 229 Nanotechnologies

ISO/TS 12901-2:2014

TC 274 Light and lighting



ISO 20121:2012


ISO/IEC 13250-2:2006

(reconfirmed)

ISO/IEC 24738:2006

(reconfirmed)

Standards withdrawn


TC 34 Food products

ISO/TS 10272-2:2006

(replaced by ISO 10272-2:2017)

TC 72 Textile machinery and accessories

ISO 2544:1975 (replaced by )

ISO 5247-2:1989 (replaced by )







TC 83 Sports and other recreational facilities and equipment



ISO/TR 13843:2000

(replaced by ISO 13843:2017)


ISO 16343:2013 (replaced by ISO 52003-1:2017)

ISO/TR 16344:2012





ISO/TS 15638-10:2013


ISO/TS 15638-18:2013


ISO/PAS 17684:2003

(replaced by )

Meeting calendarThe meeting calendar is available at

https://www.iso.org/meeting-calendar.html

Date post:	20-Oct-2021
Category:	Documents
Upload:	others
View:	2 times
Download:	0 times

ISOupdate July 2017 - Certifico

Documents