ISU Form ADD-12 Addendum 01 PROJECT: Holmstedt Hall Teaching and Research Laboratory Renovation ADDENDUM # 01 DATE: 05.01.17 TO: ALL INTERESTED BIDDERS OF RECORD BID NUMBER: B0025306 This Addendum #01 forms part of the Contract Documents and modifies the original Bidding Documents. Acknowledge receipt of this addendum in the space provided on the Bid Form. Failure to acknowledge this addendum may subject Bidder to disqualification. GENERAL INFO 1. Kewaunee Casework, Countertops, and Fume Hoods to remain as Base Bid, but Voluntary Alternates will be evaluated. a. Other vendors pre-approved for Voluntary Alternates include: i. Leonard Peterson, Vangaurd Series ii. TMI, Laminate Clad Laboratory Casework SPECIFICATION REVISIONS 1. Expected Via Addendum #2 DRAWING REVISIONS 1. A201: Remove Sink and associated plumbing from east wall of room 129A. Replace sink base cabinet with standard base cabinet. Remove drying rack above sink and replace with 36” wall cabinet. Coordinate with all trades. 2. A400: add one support system for a camera arm mounted above the ceiling. See attached specifications for camera arm, clamp, and use same support system as (attached) surgery light support. Coordinate placement with owner. QUESTION AND ANSWERS Q Will the surgery lights be provided by owner? A No, GC to provide six new fixtures and support for each. See attached fixture specification and support detail for the new fixtures. Coordinate with all trades and coordinate placement with owner. Q Do existing cabinets to be reused in 119 need to be painted? A Yes. Please prepare and paint cabinetry white. End of Addendum # 01 Attachments: Pre-Bid Conference Meeting Minutes and Sign-In Sheet, Camera Arm Spec, Surgery Light Spec and Support Details Department of Facilities Management 951 Sycamore Street Terre Haute, Indiana 47809 (812)-237-8100 Fax (812)-237-7630
Transcript
ISU Form ADD-12
Addendum 01 PROJECT Holmstedt Hall Teaching and Research Laboratory Renovation ADDENDUM 01 DATE 050117 TO ALL INTERESTED BIDDERS OF RECORD BID NUMBER B0025306 This Addendum 01 forms part of the Contract Documents and modifies the original Bidding Documents Acknowledge receipt of this addendum in the space provided on the Bid Form Failure to acknowledge this addendum may subject Bidder to disqualification GENERAL INFO
1 Kewaunee Casework Countertops and Fume Hoods to remain as Base Bid but Voluntary Alternates will be evaluated
a Other vendors pre-approved for Voluntary Alternates include
i Leonard Peterson Vangaurd Series
ii TMI Laminate Clad Laboratory Casework
SPECIFICATION REVISIONS
1 Expected Via Addendum 2
DRAWING REVISIONS
1 A201 Remove Sink and associated plumbing from east wall of room 129A Replace sink base cabinet with standard base cabinet Remove drying rack above sink and replace with 36rdquo wall cabinet Coordinate with all trades
2 A400 add one support system for a camera arm mounted above the ceiling See attached specifications for camera arm clamp and use same support system as (attached) surgery light support Coordinate placement with owner
QUESTION AND ANSWERS
Q Will the surgery lights be provided by owner A No GC to provide six new fixtures and support for each See attached fixture specification
and support detail for the new fixtures Coordinate with all trades and coordinate placement with owner
Q Do existing cabinets to be reused in 119 need to be painted A Yes Please prepare and paint cabinetry white
End of Addendum 01
Attachments Pre-Bid Conference Meeting Minutes and Sign-In Sheet Camera Arm Spec Surgery Light Spec and Support Details
Department of Facilities Management 951 Sycamore Street Terre Haute Indiana 47809 (812)-237-8100 Fax (812)-237-7630
1
ISU Form PBA-14AE
Pre-Bid Conference Meeting Notes
DATE 042617
TIME 1000am
LOCATION Holmstedt Hall
Official Project Name Holmstedt Hall Teaching amp Research Laboratory Renovation ArchitectEngineer CRMH Architecture + Commercial Interiors Inc
Main Contact Cari Rohrmayer Phone 8128780315 E-mail caricrmhnet
Introduce Ownerrsquos Teamhellip
Bryan Duncan Director of Capital Planning amp Improvements (812) 237-8195 e-mail bryanduncanindstateedu
Steve Culp Construction Manager (812) 237-8183 e-mail stevenculpindstateedu
Mark Pupilli MechanicalElectrical Rep (812) 237-8185 e-mail markpupilliindstateedu
Pat Teeters Contract Administrator (812) 230-6141(cell) e-mail patrickteetersindstateedu
Scott Tillman Campus Architect (812) 237-8198 e-mail scotttillmanindstateedu
Joe Peters Statewide Project Construction Support Manager - Space Planning and Utilization Indiana University School of Medicine (317) 278-1015 email josmpeteiuedu
Chuck Rogers Assistant Director for Faculty Design amp Construction Indiana University School of Medicine (317)-274-2405 email cgrogersiuedu
Bidding Documents
The Bid Documents are available for download on-line at the ISU Plan Room website httpwwwindstateplanroomcom (Download of Bid Documents is free) Note Bidders must register for a free account the first time they access the website
The Bid Documents may be ordered on CD (at a cost of $750 per CD) or on paper copy (at applicable printing costs) from Rapid Reproductions Inc (812)-238-1681 129 South 11th Street Terre Haute IN 47807
Forms for Bidding
Refer to Section 001010 Instructions to Bidders Part 3 for the forms required for Bidding and when they are due
Submit Bids and other information to Office of the Purchasing Department Facilities Management and Purchasing Building
Department of Facilities Management 951 Sycamore Street Terre Haute Indiana 47809 (812)-237-8100 Fax (812)-237-7630
2
951 Sycamore Street Terre Haute Indiana 47809
Bid Date May 10 2017 Time 200pm
Type of Bid Single Prime
Award Date Within seven (7) days or less
Alternates None
Allowances
1 A $300000 Allowance shall be included in the Base Bid for the AE to create ldquoRecord Drawingsrdquo as detailed in Section 017700 Contract Closeout
2 A $150000 Allowance shall be included in the Base Bid for interior door hardware
3 A $150000 Allowance shall be included in the Base Bid for interior signage
4 A 1000000 Allowance shall be included in the Base Bid for the purchase and installation of a floor mounted anti-vibration table in room 129
SupplierSubcontractor list Appendix A submit with Bid
Unit Prices None
Construction Dates All Work in Rooms 119 and 120 shall be substantially completed by August 04 2017 All Work in Room 129 to be substantially completed by September 29 2017 Final closeout shall be within sixty (60) calendar days thereafter
(From Section 001010 101D)
Tax Exempt (non profit)
Indiana State University is a Tax Exempt Institution and Indiana Sales Tax for products permanently incorporated in work shall not be included as part of the Bid or on any Application for Payment
Hours of Construction
Normal 700am-400pm Afterhours maybe arranged with the Owner
Permits and fees
Include with Bid
Asbestos or other hazardous materials
Some Anticipated if suspicious material is encountered stop work immediately and contact the Owner for clearance or removal
Owner responsible for testing and removal of floor tile
General Project Information and Requirements Site protection See Specifications Some special requirements may be necessary in offices
below the laboratories
Material storage
Parking See Section 003000 106 for requirements
Communication Job Superintendent shall have a cellular phone
Fire Protection See Section 003000 108 C for requirements
Salvage The Owner has the right of first salvage The Owner will supply a list of any items not slated for reuse which the Owner wishes to salvage All items to be salvaged will be delivered to a location on the ISU campus as directed by the Owner
Coordination With Owner A minimum of 48 Hours prior notification of any closings areas to be blocked off or utility shutdowns
Smoking Policy See Section 003000 105 for Rules
Diversity Participation
3
Pursuant to I C sect 5-16-1-7 Indiana State University has established as a goal that at least five percent (5) of its awarded contracts be let to minority business enterprise as defined in IC sect 4-13-165-1 Indiana State University welcomes Bids from minority owned business enterprise (MBE) and women owned business enterprise (WBE) For full information refer to Section 001030 of the Project Manual
Prime Bidders are encouraged to solicit Bids for subcontractor work from MBE and WBE firms for Indiana State University Project Bids and whenever qualified and economically feasible utilize these Bids for submission of the Prime Bid Report MBE or WBE firms used on the Diversity Participation List Form contained in Section 001040 of the Project Manual and submit to the ISU Purchasing office by 1200pm local time on the first working day following the Bid Opening The Form may be hand delivered faxed to (812)-237-3599 or e-mailed to mikebonnettindstateedu and louisemontgomeryindstateedu
A list of registered MBE and WBE firms is available on the ISU Purchasing website at httpsp11securehostingprodcomisupurchasingorgsslSubcontractorTrackingContractorMaintMenuA
dminphp and on the State of Indiana website at httpwwwingovidoamwbe2743htm
Additional Site Visits
None Scheduled Contact Cari Rohrmayer to schedule additional visits
Provides unsurpassed longevity and flexibilityThe DRE Vision LED is a large diameter surgery light system offering five-stage dimming and exceptional shadow control Ideal for large surgery suites and operating rooms the DRE Vision LED is available in an array of mounting options
Controlling the positioning and brightness of the DRE Vision LED is easy with the autoclavable handle The light emits virtually no radiant heat keeping clinicians cool and comfortable even during lengthy surgical procedures The DRE Vision LED is highly efficient producing unsurpassed illumination with economical energy consumption
Features
Affordable surgical lighting system offers longevity and flexibility
Large diameter LED array with exceptional shadow control
Five-stage dimming for a wide range of surgical procedures
Maximum output rated at 100000 Lux
4300 Kelvin bright white illumination
Color Rendering Index 97
Long-life LEDrsquos rated at 50000 hours
Dimming and onoff switch controlled by autoclavable handle
Light array emits virtually no radiated heat
Available in a wide array of mounting options mdash ask your DRE representative for more information
SPECIFICATIONS
3202017 Impact 3 Section Double Articulated Arm without Bracket BHEshy119
Mark Pupilli MechanicalElectrical Rep (812) 237-8185 e-mail markpupilliindstateedu
Pat Teeters Contract Administrator (812) 230-6141(cell) e-mail patrickteetersindstateedu
Scott Tillman Campus Architect (812) 237-8198 e-mail scotttillmanindstateedu
Joe Peters Statewide Project Construction Support Manager - Space Planning and Utilization Indiana University School of Medicine (317) 278-1015 email josmpeteiuedu
Chuck Rogers Assistant Director for Faculty Design amp Construction Indiana University School of Medicine (317)-274-2405 email cgrogersiuedu
Bidding Documents
The Bid Documents are available for download on-line at the ISU Plan Room website httpwwwindstateplanroomcom (Download of Bid Documents is free) Note Bidders must register for a free account the first time they access the website
The Bid Documents may be ordered on CD (at a cost of $750 per CD) or on paper copy (at applicable printing costs) from Rapid Reproductions Inc (812)-238-1681 129 South 11th Street Terre Haute IN 47807
Forms for Bidding
Refer to Section 001010 Instructions to Bidders Part 3 for the forms required for Bidding and when they are due
Submit Bids and other information to Office of the Purchasing Department Facilities Management and Purchasing Building
Department of Facilities Management 951 Sycamore Street Terre Haute Indiana 47809 (812)-237-8100 Fax (812)-237-7630
2
951 Sycamore Street Terre Haute Indiana 47809
Bid Date May 10 2017 Time 200pm
Type of Bid Single Prime
Award Date Within seven (7) days or less
Alternates None
Allowances
1 A $300000 Allowance shall be included in the Base Bid for the AE to create ldquoRecord Drawingsrdquo as detailed in Section 017700 Contract Closeout
2 A $150000 Allowance shall be included in the Base Bid for interior door hardware
3 A $150000 Allowance shall be included in the Base Bid for interior signage
4 A 1000000 Allowance shall be included in the Base Bid for the purchase and installation of a floor mounted anti-vibration table in room 129
SupplierSubcontractor list Appendix A submit with Bid
Unit Prices None
Construction Dates All Work in Rooms 119 and 120 shall be substantially completed by August 04 2017 All Work in Room 129 to be substantially completed by September 29 2017 Final closeout shall be within sixty (60) calendar days thereafter
(From Section 001010 101D)
Tax Exempt (non profit)
Indiana State University is a Tax Exempt Institution and Indiana Sales Tax for products permanently incorporated in work shall not be included as part of the Bid or on any Application for Payment
Hours of Construction
Normal 700am-400pm Afterhours maybe arranged with the Owner
Permits and fees
Include with Bid
Asbestos or other hazardous materials
Some Anticipated if suspicious material is encountered stop work immediately and contact the Owner for clearance or removal
Owner responsible for testing and removal of floor tile
General Project Information and Requirements Site protection See Specifications Some special requirements may be necessary in offices
below the laboratories
Material storage
Parking See Section 003000 106 for requirements
Communication Job Superintendent shall have a cellular phone
Fire Protection See Section 003000 108 C for requirements
Salvage The Owner has the right of first salvage The Owner will supply a list of any items not slated for reuse which the Owner wishes to salvage All items to be salvaged will be delivered to a location on the ISU campus as directed by the Owner
Coordination With Owner A minimum of 48 Hours prior notification of any closings areas to be blocked off or utility shutdowns
Smoking Policy See Section 003000 105 for Rules
Diversity Participation
3
Pursuant to I C sect 5-16-1-7 Indiana State University has established as a goal that at least five percent (5) of its awarded contracts be let to minority business enterprise as defined in IC sect 4-13-165-1 Indiana State University welcomes Bids from minority owned business enterprise (MBE) and women owned business enterprise (WBE) For full information refer to Section 001030 of the Project Manual
Prime Bidders are encouraged to solicit Bids for subcontractor work from MBE and WBE firms for Indiana State University Project Bids and whenever qualified and economically feasible utilize these Bids for submission of the Prime Bid Report MBE or WBE firms used on the Diversity Participation List Form contained in Section 001040 of the Project Manual and submit to the ISU Purchasing office by 1200pm local time on the first working day following the Bid Opening The Form may be hand delivered faxed to (812)-237-3599 or e-mailed to mikebonnettindstateedu and louisemontgomeryindstateedu
A list of registered MBE and WBE firms is available on the ISU Purchasing website at httpsp11securehostingprodcomisupurchasingorgsslSubcontractorTrackingContractorMaintMenuA
dminphp and on the State of Indiana website at httpwwwingovidoamwbe2743htm
Additional Site Visits
None Scheduled Contact Cari Rohrmayer to schedule additional visits
Provides unsurpassed longevity and flexibilityThe DRE Vision LED is a large diameter surgery light system offering five-stage dimming and exceptional shadow control Ideal for large surgery suites and operating rooms the DRE Vision LED is available in an array of mounting options
Controlling the positioning and brightness of the DRE Vision LED is easy with the autoclavable handle The light emits virtually no radiant heat keeping clinicians cool and comfortable even during lengthy surgical procedures The DRE Vision LED is highly efficient producing unsurpassed illumination with economical energy consumption
Features
Affordable surgical lighting system offers longevity and flexibility
Large diameter LED array with exceptional shadow control
Five-stage dimming for a wide range of surgical procedures
Maximum output rated at 100000 Lux
4300 Kelvin bright white illumination
Color Rendering Index 97
Long-life LEDrsquos rated at 50000 hours
Dimming and onoff switch controlled by autoclavable handle
Light array emits virtually no radiated heat
Available in a wide array of mounting options mdash ask your DRE representative for more information
SPECIFICATIONS
3202017 Impact 3 Section Double Articulated Arm without Bracket BHEshy119
Showing results for Impact Super Clamp With 1 - 1 of 1
Page 1 of 1 | 1 - 1 of 1 Items
Help us improve our search Did you find what you were searching for Yes No
For any other assistance contact Customer Service | Live Chat
YOUR RECENTLY VIEWED ITEMS
SHIPPING
Free Expedited Shipping for most orders over $49
RETURNS
Shop With Confidence Easy 30-Day Return Policy
GIFT CARDS
The Gift that Never Expires
EVENT SPACE
Expert BampH Events and Presentations
LANGUAGE
CURRENCY
SIGN UP FOR BampH NEWS AND SPECIAL OFFERS ENJOY THE BampH MOBILE SHOPPING EXPERIENCE
SALES amp EXPERT ADVICE
8009523386 or 2124446711
CONTACT US LIVE CHAT CUSTOMER SERVICE
8002215743 or 2122397765
MORE HELPFUL LINKS +
Other BampH Sites - Gov EDU amp Corp About UsLive Chat8009523386 2124446711 HelpRead
The Professionals Source
Impact Super Clamp With Ratchet Handle Hello Log InMy Account
Photography Computers Pro Video Lighting Pro Audio Mobile TVs amp Entertainment Camcorders Surveillance Optics amp Outdoor Audio-Visual Used Specials
Free 2-Day Shipping to Terre Haute Order in the next 1819 Details
BampH IMCC106R MFR CC-106R
Impact Super Clamp withRatchet Handle
33 lb Load CapacityIncludes 58 Stud and Wedge
In StockOrder by 4pm to ship today
Eligible for Free Expedited Shipping on ordersover $49
(117)
You Pay $1795
1 Add to Cart
Price $1994Instant Savings 10
Add to Wish List
Back to top
English US Dollar
DealZoneDONT MISS OUTEnds In 081819
1 LOAD CRITERIA UNISTRUT SYSTEM
2 DEFLECTION MAX AT MAX POINT LOAD 116
3 ALL BOLTED CONNECTIONS INTO COLD-FORMED CHANNEL
MEMBERS WITH CHANNEL NUTS SHALL BE TIGHTENED TO
a 19 FT-LBS FOR
3
8
BOLTS
b 50 FT-LBS FOR
1
2
BOLTS
c 100 FT-LBS FOR
5
8
BOLTS
USING DRY COMPONENTS AND A PROPERLY CALIBRATED TORQUE
WRENCH CHANNEL NUT MUST BE ORIENTED SUCH THAT THE TEETH
GRIP THE INTURNED EDGE OF THE CHANNEL
4 ALL CONCRETE ANCHORS TO BE POWERS SD1 12 DIAMETER
INSTALLATION TORQUE TO BE 40 FT-LBS INSTALLED WITH TORQUE
WRENCH INSTALLER TO BE POWERS CERTIFIED INSTALLER
5 ALL CONNECTIONS TO BAR JOIST TO BE WITHIN 6 OF PANEL POINTS
6 UNISTRUT TO PROVIDE CLOSURE STRIPS (WHITE)
AND WALL MOLD (WHITE) ALONG ALL EXPOSED CEILING CHANNEL
WALL MOLD TO BE A STOCK STANDARD
15
16
WALL MOLD SHOULD A
SPECIAL WALL MOLD BE DESIRED IT IS TO BE SUPPLIED BY OTHERS
AND MUST BE ONSITE DURING OUR INSTALL TO BE INSTALLED BY
UNISTRUT
7 COORDINATE WITH ALL TRADES AND EXISTING INFRASTRUCTURE
8 EXISTING STRUCTURE TO BE CHECKED BY OTHERS IT IS THE
RESPONSIBILITY OF GC TO CHECK FOR ANY EMBEDDED
CONDUIT POST-TENSION CABLES ETC WHERE APPLICABLE
9 IT IS THE RESPONSIBILITY OF GC TO CHECK FOR
INTERFERENCES WITH MEP INCLUDING SOFFITS DUCTWORK ETC
WHERE APPLICABLE PLEASE PAY PARTICULAR ATTENTION TO
LIGHTING
NTS
UNISTRUT SURGERY LIGHT SUPPORT
GENERAL NOTES
SIDE VIEW
SIDE VIEW
TOP VIEW
UNISTRUT CHANNEL
CHANNEL NUT
CHANNEL NUT MUST BE ORIENTED
SUCH THAT THE TEETH GRIP THE
INTURNED EDGE OF THE CHANNEL
EXISTING CONCRETE
EXISTING CONCRETE
7 58 STRUT
1 58 STRUT
COORDINATE BASE PLATE
WITH LIGHT FIXTURE
COORDINATE BASE PLATE
WITH LIGHT FIXTURE
1 58 STRUT
KWIK BOLT TZ 5X375-TYP
2
951 Sycamore Street Terre Haute Indiana 47809
Bid Date May 10 2017 Time 200pm
Type of Bid Single Prime
Award Date Within seven (7) days or less
Alternates None
Allowances
1 A $300000 Allowance shall be included in the Base Bid for the AE to create ldquoRecord Drawingsrdquo as detailed in Section 017700 Contract Closeout
2 A $150000 Allowance shall be included in the Base Bid for interior door hardware
3 A $150000 Allowance shall be included in the Base Bid for interior signage
4 A 1000000 Allowance shall be included in the Base Bid for the purchase and installation of a floor mounted anti-vibration table in room 129
SupplierSubcontractor list Appendix A submit with Bid
Unit Prices None
Construction Dates All Work in Rooms 119 and 120 shall be substantially completed by August 04 2017 All Work in Room 129 to be substantially completed by September 29 2017 Final closeout shall be within sixty (60) calendar days thereafter
(From Section 001010 101D)
Tax Exempt (non profit)
Indiana State University is a Tax Exempt Institution and Indiana Sales Tax for products permanently incorporated in work shall not be included as part of the Bid or on any Application for Payment
Hours of Construction
Normal 700am-400pm Afterhours maybe arranged with the Owner
Permits and fees
Include with Bid
Asbestos or other hazardous materials
Some Anticipated if suspicious material is encountered stop work immediately and contact the Owner for clearance or removal
Owner responsible for testing and removal of floor tile
General Project Information and Requirements Site protection See Specifications Some special requirements may be necessary in offices
below the laboratories
Material storage
Parking See Section 003000 106 for requirements
Communication Job Superintendent shall have a cellular phone
Fire Protection See Section 003000 108 C for requirements
Salvage The Owner has the right of first salvage The Owner will supply a list of any items not slated for reuse which the Owner wishes to salvage All items to be salvaged will be delivered to a location on the ISU campus as directed by the Owner
Coordination With Owner A minimum of 48 Hours prior notification of any closings areas to be blocked off or utility shutdowns
Smoking Policy See Section 003000 105 for Rules
Diversity Participation
3
Pursuant to I C sect 5-16-1-7 Indiana State University has established as a goal that at least five percent (5) of its awarded contracts be let to minority business enterprise as defined in IC sect 4-13-165-1 Indiana State University welcomes Bids from minority owned business enterprise (MBE) and women owned business enterprise (WBE) For full information refer to Section 001030 of the Project Manual
Prime Bidders are encouraged to solicit Bids for subcontractor work from MBE and WBE firms for Indiana State University Project Bids and whenever qualified and economically feasible utilize these Bids for submission of the Prime Bid Report MBE or WBE firms used on the Diversity Participation List Form contained in Section 001040 of the Project Manual and submit to the ISU Purchasing office by 1200pm local time on the first working day following the Bid Opening The Form may be hand delivered faxed to (812)-237-3599 or e-mailed to mikebonnettindstateedu and louisemontgomeryindstateedu
A list of registered MBE and WBE firms is available on the ISU Purchasing website at httpsp11securehostingprodcomisupurchasingorgsslSubcontractorTrackingContractorMaintMenuA
dminphp and on the State of Indiana website at httpwwwingovidoamwbe2743htm
Additional Site Visits
None Scheduled Contact Cari Rohrmayer to schedule additional visits
Provides unsurpassed longevity and flexibilityThe DRE Vision LED is a large diameter surgery light system offering five-stage dimming and exceptional shadow control Ideal for large surgery suites and operating rooms the DRE Vision LED is available in an array of mounting options
Controlling the positioning and brightness of the DRE Vision LED is easy with the autoclavable handle The light emits virtually no radiant heat keeping clinicians cool and comfortable even during lengthy surgical procedures The DRE Vision LED is highly efficient producing unsurpassed illumination with economical energy consumption
Features
Affordable surgical lighting system offers longevity and flexibility
Large diameter LED array with exceptional shadow control
Five-stage dimming for a wide range of surgical procedures
Maximum output rated at 100000 Lux
4300 Kelvin bright white illumination
Color Rendering Index 97
Long-life LEDrsquos rated at 50000 hours
Dimming and onoff switch controlled by autoclavable handle
Light array emits virtually no radiated heat
Available in a wide array of mounting options mdash ask your DRE representative for more information
SPECIFICATIONS
3202017 Impact 3 Section Double Articulated Arm without Bracket BHEshy119
Showing results for Impact Super Clamp With 1 - 1 of 1
Page 1 of 1 | 1 - 1 of 1 Items
Help us improve our search Did you find what you were searching for Yes No
For any other assistance contact Customer Service | Live Chat
YOUR RECENTLY VIEWED ITEMS
SHIPPING
Free Expedited Shipping for most orders over $49
RETURNS
Shop With Confidence Easy 30-Day Return Policy
GIFT CARDS
The Gift that Never Expires
EVENT SPACE
Expert BampH Events and Presentations
LANGUAGE
CURRENCY
SIGN UP FOR BampH NEWS AND SPECIAL OFFERS ENJOY THE BampH MOBILE SHOPPING EXPERIENCE
SALES amp EXPERT ADVICE
8009523386 or 2124446711
CONTACT US LIVE CHAT CUSTOMER SERVICE
8002215743 or 2122397765
MORE HELPFUL LINKS +
Other BampH Sites - Gov EDU amp Corp About UsLive Chat8009523386 2124446711 HelpRead
The Professionals Source
Impact Super Clamp With Ratchet Handle Hello Log InMy Account
Photography Computers Pro Video Lighting Pro Audio Mobile TVs amp Entertainment Camcorders Surveillance Optics amp Outdoor Audio-Visual Used Specials
Free 2-Day Shipping to Terre Haute Order in the next 1819 Details
BampH IMCC106R MFR CC-106R
Impact Super Clamp withRatchet Handle
33 lb Load CapacityIncludes 58 Stud and Wedge
In StockOrder by 4pm to ship today
Eligible for Free Expedited Shipping on ordersover $49
(117)
You Pay $1795
1 Add to Cart
Price $1994Instant Savings 10
Add to Wish List
Back to top
English US Dollar
DealZoneDONT MISS OUTEnds In 081819
1 LOAD CRITERIA UNISTRUT SYSTEM
2 DEFLECTION MAX AT MAX POINT LOAD 116
3 ALL BOLTED CONNECTIONS INTO COLD-FORMED CHANNEL
MEMBERS WITH CHANNEL NUTS SHALL BE TIGHTENED TO
a 19 FT-LBS FOR
3
8
BOLTS
b 50 FT-LBS FOR
1
2
BOLTS
c 100 FT-LBS FOR
5
8
BOLTS
USING DRY COMPONENTS AND A PROPERLY CALIBRATED TORQUE
WRENCH CHANNEL NUT MUST BE ORIENTED SUCH THAT THE TEETH
GRIP THE INTURNED EDGE OF THE CHANNEL
4 ALL CONCRETE ANCHORS TO BE POWERS SD1 12 DIAMETER
INSTALLATION TORQUE TO BE 40 FT-LBS INSTALLED WITH TORQUE
WRENCH INSTALLER TO BE POWERS CERTIFIED INSTALLER
5 ALL CONNECTIONS TO BAR JOIST TO BE WITHIN 6 OF PANEL POINTS
6 UNISTRUT TO PROVIDE CLOSURE STRIPS (WHITE)
AND WALL MOLD (WHITE) ALONG ALL EXPOSED CEILING CHANNEL
WALL MOLD TO BE A STOCK STANDARD
15
16
WALL MOLD SHOULD A
SPECIAL WALL MOLD BE DESIRED IT IS TO BE SUPPLIED BY OTHERS
AND MUST BE ONSITE DURING OUR INSTALL TO BE INSTALLED BY
UNISTRUT
7 COORDINATE WITH ALL TRADES AND EXISTING INFRASTRUCTURE
8 EXISTING STRUCTURE TO BE CHECKED BY OTHERS IT IS THE
RESPONSIBILITY OF GC TO CHECK FOR ANY EMBEDDED
CONDUIT POST-TENSION CABLES ETC WHERE APPLICABLE
9 IT IS THE RESPONSIBILITY OF GC TO CHECK FOR
INTERFERENCES WITH MEP INCLUDING SOFFITS DUCTWORK ETC
WHERE APPLICABLE PLEASE PAY PARTICULAR ATTENTION TO
LIGHTING
NTS
UNISTRUT SURGERY LIGHT SUPPORT
GENERAL NOTES
SIDE VIEW
SIDE VIEW
TOP VIEW
UNISTRUT CHANNEL
CHANNEL NUT
CHANNEL NUT MUST BE ORIENTED
SUCH THAT THE TEETH GRIP THE
INTURNED EDGE OF THE CHANNEL
EXISTING CONCRETE
EXISTING CONCRETE
7 58 STRUT
1 58 STRUT
COORDINATE BASE PLATE
WITH LIGHT FIXTURE
COORDINATE BASE PLATE
WITH LIGHT FIXTURE
1 58 STRUT
KWIK BOLT TZ 5X375-TYP
3
Pursuant to I C sect 5-16-1-7 Indiana State University has established as a goal that at least five percent (5) of its awarded contracts be let to minority business enterprise as defined in IC sect 4-13-165-1 Indiana State University welcomes Bids from minority owned business enterprise (MBE) and women owned business enterprise (WBE) For full information refer to Section 001030 of the Project Manual
Prime Bidders are encouraged to solicit Bids for subcontractor work from MBE and WBE firms for Indiana State University Project Bids and whenever qualified and economically feasible utilize these Bids for submission of the Prime Bid Report MBE or WBE firms used on the Diversity Participation List Form contained in Section 001040 of the Project Manual and submit to the ISU Purchasing office by 1200pm local time on the first working day following the Bid Opening The Form may be hand delivered faxed to (812)-237-3599 or e-mailed to mikebonnettindstateedu and louisemontgomeryindstateedu
A list of registered MBE and WBE firms is available on the ISU Purchasing website at httpsp11securehostingprodcomisupurchasingorgsslSubcontractorTrackingContractorMaintMenuA
dminphp and on the State of Indiana website at httpwwwingovidoamwbe2743htm
Additional Site Visits
None Scheduled Contact Cari Rohrmayer to schedule additional visits
Provides unsurpassed longevity and flexibilityThe DRE Vision LED is a large diameter surgery light system offering five-stage dimming and exceptional shadow control Ideal for large surgery suites and operating rooms the DRE Vision LED is available in an array of mounting options
Controlling the positioning and brightness of the DRE Vision LED is easy with the autoclavable handle The light emits virtually no radiant heat keeping clinicians cool and comfortable even during lengthy surgical procedures The DRE Vision LED is highly efficient producing unsurpassed illumination with economical energy consumption
Features
Affordable surgical lighting system offers longevity and flexibility
Large diameter LED array with exceptional shadow control
Five-stage dimming for a wide range of surgical procedures
Maximum output rated at 100000 Lux
4300 Kelvin bright white illumination
Color Rendering Index 97
Long-life LEDrsquos rated at 50000 hours
Dimming and onoff switch controlled by autoclavable handle
Light array emits virtually no radiated heat
Available in a wide array of mounting options mdash ask your DRE representative for more information
SPECIFICATIONS
3202017 Impact 3 Section Double Articulated Arm without Bracket BHEshy119
Provides unsurpassed longevity and flexibilityThe DRE Vision LED is a large diameter surgery light system offering five-stage dimming and exceptional shadow control Ideal for large surgery suites and operating rooms the DRE Vision LED is available in an array of mounting options
Controlling the positioning and brightness of the DRE Vision LED is easy with the autoclavable handle The light emits virtually no radiant heat keeping clinicians cool and comfortable even during lengthy surgical procedures The DRE Vision LED is highly efficient producing unsurpassed illumination with economical energy consumption
Features
Affordable surgical lighting system offers longevity and flexibility
Large diameter LED array with exceptional shadow control
Five-stage dimming for a wide range of surgical procedures
Maximum output rated at 100000 Lux
4300 Kelvin bright white illumination
Color Rendering Index 97
Long-life LEDrsquos rated at 50000 hours
Dimming and onoff switch controlled by autoclavable handle
Light array emits virtually no radiated heat
Available in a wide array of mounting options mdash ask your DRE representative for more information
SPECIFICATIONS
3202017 Impact 3 Section Double Articulated Arm without Bracket BHEshy119
