ww
w.k
ieh
l-g
rou
p.c
om
Thermodur-satina
Metallised matt-finish emulsion polish Features Metallised emulsion polish with a high solids content and excellent film-building properties. Thermodur-satina provides a high-quality non-slip coating which is particularly durable, dirt-resistant and wipe-proof. The matt finish will not become shiny even when polished. The coating is resistant to disinfectant cleaners.
Ingredients Polymer dispersions, polyethylene waxes, water-soluble solvents, resins, plasticizers. pH value (concentrate): approx. 8.5
Application Suitable for use on water-resistant, stripped floor coverings, such as PVC, rubber, linoleum, absorbent natural and artificial stone. Before using Thermodur-satina on P-U or P-E floor coverings, please make an adhesion test.
Directions Shake well before use! After stripping the floor and a short drying time, apply product undiluted in a thin layer using a flat mop. Do not let the product dry on the mop and immediately close the container after use. Coating stripped floor coverings: Depending on the absorbency level of the floor, 2-3 applications at approx. 30-minute intervals may be necessary. For routine cleaning, do not use maintenance products, since they can create a shiny effect.
Coverage per square metre Coating: 25 ml per application
No consumer product according to 1999/44/EC Art. 1! For professional use only!
Packaging
Carton of 2 x 5 litre containers Art. No. j 20 07 05 Protect from frost!
Floor finishing
15.0
7.20
15
22
.06.
2015